Hi everyone,
This is v5 of the MT8186 Chromebook device tree series. This series also
depends on MT7921S Bluetooth [1] and IT6505 audio [2] bindings.
Changes since v4:
- Rebase and fit in mt8188-evb in board DT binding
- Change "touchpad" to "trackpad" in descriptions and commit logs
- Drop #address-cells and #size-cells from it6505 and usb_host1 nodes
- Drop "ports" nodes from type-c nodes
- Fix pinmux node names
- Split anx7625 reset and power-en pins into separate pinmux nodes
Not changed: "/delete-node/ trackpad@15" is still present. See patch 6
footer.
Changes since v3:
- Collected reviewed-by from Angelo
- Reorder some properties to conform better to the newly proposed DT
style guidelines
- Drop unused labels
- Rename bt-sco node name to bt-sco-codec
- Drop i2s*-share properties from afe node
- Drop aud_gpio_tdm_{on,off} pinctrl nodes
- Replace interrupts with interrupts-extended in tpm node
- Enable adsp device
Changes since v2:
- Picked up Conor's ack
- Renamed remaining "touchpad" nodes to "trackpad"
- Dropped pinctrl from tentacruel/tentacool second source trackpad
Changes since v1:
- Reorder SKU numbers in descending order.
- Fixed pinconfig node names
- Moved pinctrl-* properties after interrupts-*
- Switched to interrupts-extended for external components
- Marked ADSP as explicitly disabled, with a comment explaining that it
stalls the system
- Renamed "touchpad" to "trackpad"
- Dropped bogus "no-laneswap" property from it6505 node
- Moved "realtek,jd-src" property to after all the regulator supplies
- Switched to macros for MT6366 regulator "regulator-allowed-modes"
- Renamed "vgpu" regulator name to allow coupling, with a comment
containing the name used in the design
- Renamed "cr50" node name to "tpm"
- Moved trackpad_pins reference up to i2c2; workaround for second source
component resource sharing.
- Fix copyright year
- Fixed touchscreen supply name
- Mark missing components as disabled instead of deleting the node
- Dropped reset-gpios from touchscreen nodes
- Drop status = "okay", which is the default
This series adds device trees for the various MT8186 Chromebooks that
were initially released. These are the Tentacruel / Tentacool devices
released by ASUS, and the Steelix / Rusty / Magneton devices released
by Lenovo. The device trees are taken from the downstream ChromeOS v5.15
kernel, ported to mainline and cleaned up.
Corsola is the Google codename given to the MT8186 platform. This
platform has two reference designs, Krabby and Kingler. Kingler was not
used in any actual product, and is therefor not included. Steelix is
an alternative design put forward and is effectively a mix-and-match of
the two reference designs.
Most of the core design is shared between the variants. The differences
are on which external components, such as the display bridges, are used.
Patch 1 cleans up the current list of MediaTek boards. The entries are
reordered by SoC model first, then by board name.
Patch 2 through 5 add DT binding entries for the Tentacruel/Tentacool,
Steelix, Rusty, and Magneton Chromebooks.
Patch 6 through 9 add board device tree files for these devices. Patch 6
also adds the corsola dtsi file for the commonalities between the designs,
as well as a dtsi file for the krabby reference design.
Currently external display support is missing. Audio is not working, as
enabling the audio DSP causes my test systems to hang.
Please have a look and test if possible.
Regards
ChenYu
[1] https://lore.kernel.org/all/[email protected]/
[2] https://lore.kernel.org/all/[email protected]/
Chen-Yu Tsai (9):
dt-bindings: arm: mediatek: Sort entries by SoC then board compatibles
dt-bindings: arm: mediatek: Add MT8186 Tentacruel / Tentacool
Chromebooks
dt-bindings: arm: mediatek: Add MT8186 Steelix Chromebook
dt-bindings: arm: mediatek: Add MT8186 Rusty Chromebook
dt-bindings: arm: mediatek: Add MT8186 Magneton Chromebooks
arm64: dts: mediatek: Add MT8186 Krabby platform based Tentacruel /
Tentacool
arm64: dts: mediatek: Introduce MT8186 Steelix
arm64: dts: mediatek: Add MT8186 Steelix platform based Rusty
arm64: dts: mediatek: Add MT8186 Magneton Chromebooks
.../devicetree/bindings/arm/mediatek.yaml | 188 +-
arch/arm64/boot/dts/mediatek/Makefile | 10 +
.../dts/mediatek/mt8186-corsola-krabby.dtsi | 129 ++
.../mt8186-corsola-magneton-sku393216.dts | 39 +
.../mt8186-corsola-magneton-sku393217.dts | 39 +
.../mt8186-corsola-magneton-sku393218.dts | 26 +
.../mt8186-corsola-rusty-sku196608.dts | 26 +
.../mt8186-corsola-steelix-sku131072.dts | 18 +
.../mt8186-corsola-steelix-sku131073.dts | 18 +
.../dts/mediatek/mt8186-corsola-steelix.dtsi | 199 ++
.../mt8186-corsola-tentacool-sku327681.dts | 57 +
.../mt8186-corsola-tentacool-sku327683.dts | 24 +
.../mt8186-corsola-tentacruel-sku262144.dts | 44 +
.../mt8186-corsola-tentacruel-sku262148.dts | 26 +
.../boot/dts/mediatek/mt8186-corsola.dtsi | 1681 +++++++++++++++++
15 files changed, 2459 insertions(+), 65 deletions(-)
create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi
create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-magneton-sku393216.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-magneton-sku393217.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-magneton-sku393218.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-rusty-sku196608.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131072.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131073.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi
create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327681.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
--
2.43.0.429.g432eaa2c6b-goog
Add entries for MT8186 based Tentacruel / Tentacool Chromebooks. The two
are based on the same board design: the former is a convertible device
with a touchscreen, stylus, and some extra buttons; the latter is a
clamshell device and lacks these additional features.
The two devices both have two variants. The difference is a second
source trackpad controller that shares the same address as the original,
but is incompatible.
The extra SKU IDs for the Tentacruel devices map to different sensor
components attached to the Embedded Controller. These are not visible
to the main processor.
Signed-off-by: Chen-Yu Tsai <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
---
Changes since v4:
- Minor: change "touchpad" to "trackpad" in description
Changes since v3:
- Collected reviewed-by from Angelo
Changes since v2:
- Picked up Conor's ack
Changes since v1:
- Reorder SKU numbers in descending order.
---
.../devicetree/bindings/arm/mediatek.yaml | 26 +++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
index dd5240b03d6c..d9fdc1196b10 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
@@ -235,6 +235,32 @@ properties:
- enum:
- mediatek,mt8183-pumpkin
- const: mediatek,mt8183
+ - description: Google Tentacruel (ASUS Chromebook CM14 Flip CM1402F)
+ items:
+ - const: google,tentacruel-sku262147
+ - const: google,tentacruel-sku262146
+ - const: google,tentacruel-sku262145
+ - const: google,tentacruel-sku262144
+ - const: google,tentacruel
+ - const: mediatek,mt8186
+ - description: Google Tentacruel (ASUS Chromebook CM14 Flip CM1402F)
+ items:
+ - const: google,tentacruel-sku262151
+ - const: google,tentacruel-sku262150
+ - const: google,tentacruel-sku262149
+ - const: google,tentacruel-sku262148
+ - const: google,tentacruel
+ - const: mediatek,mt8186
+ - description: Google Tentacool (ASUS Chromebook CM14 CM1402C)
+ items:
+ - const: google,tentacruel-sku327681
+ - const: google,tentacruel
+ - const: mediatek,mt8186
+ - description: Google Tentacool (ASUS Chromebook CM14 CM1402C)
+ items:
+ - const: google,tentacruel-sku327683
+ - const: google,tentacruel
+ - const: mediatek,mt8186
- items:
- enum:
- mediatek,mt8186-evb
--
2.43.0.429.g432eaa2c6b-goog
Add an entry for the MT8186 based Rusty Chromebook, also known as the
Lenovo 100e Chromebook Gen 4.
Signed-off-by: Chen-Yu Tsai <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
---
Changes since v4:
none
Changes since v3:
- Collected reviewed-by from Angelo
Changes since v2:
- Picked up Conor's ack
Changes since v1:
- Reorder SKU numbers in descending order.
---
Documentation/devicetree/bindings/arm/mediatek.yaml | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
index 23acfe5ed940..385bd2765626 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
@@ -235,6 +235,12 @@ properties:
- enum:
- mediatek,mt8183-pumpkin
- const: mediatek,mt8183
+ - description: Google Rusty (Lenovo 100e Chromebook Gen 4)
+ items:
+ - const: google,steelix-sku196609
+ - const: google,steelix-sku196608
+ - const: google,steelix
+ - const: mediatek,mt8186
- description: Google Steelix (Lenovo 300e Yoga Chromebook Gen 4)
items:
- enum:
--
2.43.0.429.g432eaa2c6b-goog
Add entries for the MT8186 based Chromebooks, also collectively known
as the Lenovo IdeaPad Slim 3 Chromebook (14M868). It is also based on
the "Steelix" design. Being a laptop instead of a convertible device,
there is no touchscreen or stylus, which is similar to Rusty. However
Magneton does not have ports on the right side of the device.
Three variants are listed separately. These use different touchscreen
controllers, or lack a touchscreen altogether.
Signed-off-by: Chen-Yu Tsai <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
---
Changes since v4:
none
Changes since v3:
- Collected reviewed-by from Angelo
Changes since v2:
- Picked up Conor's ack
Changes since v1:
- Reorder SKU numbers in descending order.
---
.../devicetree/bindings/arm/mediatek.yaml | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
index 385bd2765626..2a2ca4756bca 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
@@ -235,6 +235,24 @@ properties:
- enum:
- mediatek,mt8183-pumpkin
- const: mediatek,mt8183
+ - description: Google Magneton (Lenovo IdeaPad Slim 3 Chromebook (14M868))
+ items:
+ - const: google,steelix-sku393219
+ - const: google,steelix-sku393216
+ - const: google,steelix
+ - const: mediatek,mt8186
+ - description: Google Magneton (Lenovo IdeaPad Slim 3 Chromebook (14M868))
+ items:
+ - const: google,steelix-sku393220
+ - const: google,steelix-sku393217
+ - const: google,steelix
+ - const: mediatek,mt8186
+ - description: Google Magneton (Lenovo IdeaPad Slim 3 Chromebook (14M868))
+ items:
+ - const: google,steelix-sku393221
+ - const: google,steelix-sku393218
+ - const: google,steelix
+ - const: mediatek,mt8186
- description: Google Rusty (Lenovo 100e Chromebook Gen 4)
items:
- const: google,steelix-sku196609
--
2.43.0.429.g432eaa2c6b-goog
Some of the new MediaTek board entries were inserted in a chronological
order, or just randomly. This makes it harder to search for an entry.
Sort the entries by first grouping by SoC, then sorting by board
compatible strings. Also add a comment at the top asking people to do
the same.
Signed-off-by: Chen-Yu Tsai <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
---
Changes since v4:
- Rebased and fit in mt8188-evb
Changes since v3:
- Collected reviewed-by from Angelo
Changes since v2:
- none
Changes since v1:
- Collected ack from Conor
---
.../devicetree/bindings/arm/mediatek.yaml | 131 +++++++++---------
1 file changed, 66 insertions(+), 65 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
index 12cf02b30967..dd5240b03d6c 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
@@ -17,6 +17,7 @@ properties:
const: '/'
compatible:
oneOf:
+ # Sort by SoC (last) compatible, then board compatible
- items:
- enum:
- mediatek,mt2701-evb
@@ -137,75 +138,10 @@ properties:
- enum:
- mediatek,mt8173-evb
- const: mediatek,mt8173
- - items:
- - enum:
- - mediatek,mt8183-evb
- - const: mediatek,mt8183
- - description: Google Hayato rev5
- items:
- - const: google,hayato-rev5-sku2
- - const: google,hayato-sku2
- - const: google,hayato
- - const: mediatek,mt8192
- - description: Google Hayato
- items:
- - const: google,hayato-rev1
- - const: google,hayato
- - const: mediatek,mt8192
- - description: Google Spherion rev4 (Acer Chromebook 514)
- items:
- - const: google,spherion-rev4
- - const: google,spherion
- - const: mediatek,mt8192
- - description: Google Spherion (Acer Chromebook 514)
- items:
- - const: google,spherion-rev3
- - const: google,spherion-rev2
- - const: google,spherion-rev1
- - const: google,spherion-rev0
- - const: google,spherion
- - const: mediatek,mt8192
- - description: Acer Tomato (Acer Chromebook Spin 513 CP513-2H)
- items:
- - enum:
- - google,tomato-rev2
- - google,tomato-rev1
- - const: google,tomato
- - const: mediatek,mt8195
- - description: Acer Tomato rev3 - 4 (Acer Chromebook Spin 513 CP513-2H)
- items:
- - const: google,tomato-rev4
- - const: google,tomato-rev3
- - const: google,tomato
- - const: mediatek,mt8195
- - items:
- - enum:
- - mediatek,mt8186-evb
- - const: mediatek,mt8186
- - items:
- - enum:
- - mediatek,mt8188-evb
- - const: mediatek,mt8188
- - items:
- - enum:
- - mediatek,mt8192-evb
- - const: mediatek,mt8192
- - items:
- - enum:
- - mediatek,mt8195-demo
- - mediatek,mt8195-evb
- - const: mediatek,mt8195
- description: Google Burnet (HP Chromebook x360 11MK G3 EE)
items:
- const: google,burnet
- const: mediatek,mt8183
- - description: Google Krane (Lenovo IdeaPad Duet, 10e,...)
- items:
- - enum:
- - google,krane-sku0
- - google,krane-sku176
- - const: google,krane
- - const: mediatek,mt8183
- description: Google Cozmo (Acer Chromebook 314)
items:
- const: google,cozmo
@@ -263,6 +199,13 @@ properties:
- google,kodama-sku32
- const: google,kodama
- const: mediatek,mt8183
+ - description: Google Krane (Lenovo IdeaPad Duet, 10e,...)
+ items:
+ - enum:
+ - google,krane-sku0
+ - google,krane-sku176
+ - const: google,krane
+ - const: mediatek,mt8183
- description: Google Makomo (Lenovo 100e Chromebook 2nd Gen MTK 2)
items:
- enum:
@@ -284,10 +227,68 @@ properties:
- google,willow-sku1
- const: google,willow
- const: mediatek,mt8183
+ - items:
+ - enum:
+ - mediatek,mt8183-evb
+ - const: mediatek,mt8183
- items:
- enum:
- mediatek,mt8183-pumpkin
- const: mediatek,mt8183
+ - items:
+ - enum:
+ - mediatek,mt8186-evb
+ - const: mediatek,mt8186
+ - items:
+ - enum:
+ - mediatek,mt8188-evb
+ - const: mediatek,mt8188
+ - description: Google Hayato
+ items:
+ - const: google,hayato-rev1
+ - const: google,hayato
+ - const: mediatek,mt8192
+ - description: Google Hayato rev5
+ items:
+ - const: google,hayato-rev5-sku2
+ - const: google,hayato-sku2
+ - const: google,hayato
+ - const: mediatek,mt8192
+ - description: Google Spherion (Acer Chromebook 514)
+ items:
+ - const: google,spherion-rev3
+ - const: google,spherion-rev2
+ - const: google,spherion-rev1
+ - const: google,spherion-rev0
+ - const: google,spherion
+ - const: mediatek,mt8192
+ - description: Google Spherion rev4 (Acer Chromebook 514)
+ items:
+ - const: google,spherion-rev4
+ - const: google,spherion
+ - const: mediatek,mt8192
+ - items:
+ - enum:
+ - mediatek,mt8192-evb
+ - const: mediatek,mt8192
+ - description: Acer Tomato (Acer Chromebook Spin 513 CP513-2H)
+ items:
+ - enum:
+ - google,tomato-rev2
+ - google,tomato-rev1
+ - const: google,tomato
+ - const: mediatek,mt8195
+ - description: Acer Tomato rev3 - 4 (Acer Chromebook Spin 513 CP513-2H)
+ items:
+ - const: google,tomato-rev4
+ - const: google,tomato-rev3
+ - const: google,tomato
+ - const: mediatek,mt8195
+ - items:
+ - enum:
+ - mediatek,mt8195-demo
+ - mediatek,mt8195-evb
+ - const: mediatek,mt8195
- items:
- enum:
- mediatek,mt8365-evk
--
2.43.0.429.g432eaa2c6b-goog
Add an entry for the MT8186 based Steelix Chromebook, also known as the
Lenovo 300e Yoga Chromebook Gen 4.
Signed-off-by: Chen-Yu Tsai <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
---
Changes since v4:
none
Changes since v3:
- Collected reviewed-by from Angelo
Changes since v2:
- Picked up Conor's ack
Changes since v1:
none
---
Documentation/devicetree/bindings/arm/mediatek.yaml | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
index d9fdc1196b10..23acfe5ed940 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
@@ -235,6 +235,13 @@ properties:
- enum:
- mediatek,mt8183-pumpkin
- const: mediatek,mt8183
+ - description: Google Steelix (Lenovo 300e Yoga Chromebook Gen 4)
+ items:
+ - enum:
+ - google,steelix-sku131072
+ - google,steelix-sku131073
+ - const: google,steelix
+ - const: mediatek,mt8186
- description: Google Tentacruel (ASUS Chromebook CM14 Flip CM1402F)
items:
- const: google,tentacruel-sku262147
--
2.43.0.429.g432eaa2c6b-goog
Tentacruel and Tentacool are MT8186 based Chromebooks based on the
Krabby design.
Tentacruel, also known as the ASUS Chromebook CM14 Flip CM1402F, is a
convertible device with touchscreen and stylus.
Tentacool, also known as the ASUS Chromebook CM14 CM1402C, is a laptop
device. It does not have a touchscreen or stylus.
The two devices both have two variants. The difference is a second
source trackpad controller that shares the same address as the original,
but is incompatible.
The extra SKU IDs for the Tentacruel devices map to different sensor
components attached to the Embedded Controller. These are not visible
to the main processor.
Signed-off-by: Chen-Yu Tsai <[email protected]>
Acked-by: Conor Dooley <[email protected]>
---
This version still keeps the "/delete-node/ trackpad@15" statement in
the two SKUs with different yet conflicting trackpads. The other devices
introduced in the next patches all inherit and use the original trackpad
from the corsola.dtsi file. Instead of pushing the definition down and
duplicating it everywhere, I think it makes more sense to have it in the
common .dtsi file and replace it only in the devices that use the
conflicting component model. Right now it's 8:2, but future devices may
introduce more users of the common model. 1 such device with it will be
added in the near future.
Changes since v4:
- Drop #address-cells and #size-cells from it6505 and usb_host1 nodes
- Drop "ports" nodes from type-c nodes
- Change "touchpad" to "trackpad" in commit log
Changes since v3:
- Reorder some properties to conform better to the newly proposed DT
style guidelines
- Drop unused labels
- Rename bt-sco node name to bt-sco-codec
- Drop i2s*-share properties from afe node
- Drop aud_gpio_tdm_{on,off} pinctrl nodes
- Replace interrupts with interrupts-extended in tpm node
- Enable adsp device
Changes since v2:
- Picked up Conor's ack
- Rename touchpad to trackpad
- Drop pinctrl properties from trackpad in tentacruel/tentacool second
source trackpad
Changes since v1:
- Reorder SKU numbers in descending order.
- Fixed pinconfig node names
- Moved pinctrl-* properties after interrupts-*
- Switched to interrupts-extended for external components
- Marked ADSP as explicitly disabled, with a comment explaining that it
stalls the system
- Renamed "touchpad" to "trackpad"
- Dropped bogus "no-laneswap" property from it6505 node
- Moved "realtek,jd-src" property to after all the regulator supplies
- Switched to macros for MT6366 regulator "regulator-allowed-modes"
- Renamed "vgpu" regulator name to allow coupling, with a comment
containing the name used in the design
- Renamed "cr50" node name to "tpm"
- Moved trackpad_pins reference up to i2c2; workaround for second source
component resource sharing.
- Fix copyright year
- Fixed touchscreen supply name
---
arch/arm64/boot/dts/mediatek/Makefile | 4 +
.../dts/mediatek/mt8186-corsola-krabby.dtsi | 129 ++
.../mt8186-corsola-tentacool-sku327681.dts | 57 +
.../mt8186-corsola-tentacool-sku327683.dts | 24 +
.../mt8186-corsola-tentacruel-sku262144.dts | 44 +
.../mt8186-corsola-tentacruel-sku262148.dts | 26 +
.../boot/dts/mediatek/mt8186-corsola.dtsi | 1681 +++++++++++++++++
7 files changed, 1965 insertions(+)
create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi
create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327681.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 8bff11acfe1f..22812b175736 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -51,6 +51,10 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku32.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327681.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327683.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacruel-sku262144.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacruel-sku262148.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r1.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi
new file mode 100644
index 000000000000..7c971198fa95
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ aliases {
+ i2c4 = &i2c4;
+ };
+};
+
+&dsi_out {
+ remote-endpoint = <&ps8640_in>;
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+
+ edp-bridge@8 {
+ compatible = "parade,ps8640";
+ reg = <0x8>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ps8640_pins>;
+ powerdown-gpios = <&pio 96 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&pio 98 GPIO_ACTIVE_LOW>;
+ vdd12-supply = <&mt6366_vrf12_reg>;
+ vdd33-supply = <&mt6366_vcn33_reg>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ ps8640_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ ps8640_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+
+ aux-bus {
+ panel {
+ compatible = "edp-panel";
+ power-supply = <&pp3300_disp_x>;
+ backlight = <&backlight_lcd0>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&ps8640_out>;
+ };
+ };
+ };
+ };
+ };
+};
+
+&i2c1 {
+ i2c-scl-internal-delay-ns = <10000>;
+
+ touchscreen: touchscreen@10 {
+ compatible = "hid-over-i2c";
+ reg = <0x10>;
+ interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&touchscreen_pins>;
+ post-power-on-delay-ms = <10>;
+ hid-descr-addr = <0x0001>;
+ vdd-supply = <&pp3300_s3>;
+ };
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins>;
+ clock-frequency = <400000>;
+ status = "okay";
+
+ proximity@28 {
+ compatible = "semtech,sx9324";
+ reg = <0x28>;
+ #io-channel-cells = <1>;
+ interrupts-extended = <&pio 5 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sar_sensor_pins>;
+ vdd-supply = <&mt6366_vio18_reg>;
+ svdd-supply = <&mt6366_vio18_reg>;
+ };
+};
+
+&pio {
+ i2c4_pins: i2c4-pins {
+ pins-bus {
+ pinmux = <PINMUX_GPIO136__FUNC_SDA4>,
+ <PINMUX_GPIO135__FUNC_SCL4>;
+ bias-disable;
+ drive-strength = <4>;
+ input-enable;
+ };
+ };
+
+ ps8640_pins: ps8640-pins {
+ pins-pwrdn-rst {
+ pinmux = <PINMUX_GPIO96__FUNC_GPIO96>,
+ <PINMUX_GPIO98__FUNC_GPIO98>;
+ output-low;
+ };
+ };
+
+ sar_sensor_pins: sar-sensor-pins {
+ pins-irq {
+ pinmux = <PINMUX_GPIO5__FUNC_GPIO5>;
+ input-enable;
+ bias-pull-up;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327681.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327681.dts
new file mode 100644
index 000000000000..9bb64353ca65
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327681.dts
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-krabby.dtsi"
+
+/ {
+ model = "Google Tentacool board";
+ compatible = "google,tentacruel-sku327681", "google,tentacruel", "mediatek,mt8186";
+ chassis-type = "laptop";
+};
+
+/* Tentacool omits the pen. */
+&gpio_keys {
+ status = "disabled";
+};
+
+/* Tentacool omits the touchscreen; nothing else is on i2c1. */
+&i2c1 {
+ status = "disabled";
+};
+
+&keyboard_controller {
+ function-row-physmap = <
+ MATRIX_KEY(0x00, 0x02, 0) /* T1 */
+ MATRIX_KEY(0x03, 0x02, 0) /* T2 */
+ MATRIX_KEY(0x02, 0x02, 0) /* T3 */
+ MATRIX_KEY(0x01, 0x02, 0) /* T4 */
+ MATRIX_KEY(0x03, 0x04, 0) /* T5 */
+ MATRIX_KEY(0x02, 0x04, 0) /* T6 */
+ MATRIX_KEY(0x01, 0x04, 0) /* T7 */
+ MATRIX_KEY(0x02, 0x09, 0) /* T8 */
+ MATRIX_KEY(0x01, 0x09, 0) /* T9 */
+ MATRIX_KEY(0x00, 0x04, 0) /* T10 */
+ >;
+
+ linux,keymap = <
+ MATRIX_KEY(0x00, 0x02, KEY_BACK)
+ MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+ MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+ MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+ MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+ MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+ MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+ MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+ MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+ MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+ CROS_STD_MAIN_KEYMAP
+ >;
+};
+
+/* Tentacool omits the touchscreen. */
+&touchscreen {
+ status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts
new file mode 100644
index 000000000000..c3ae6f9616c8
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+#include "mt8186-corsola-tentacool-sku327681.dts"
+
+/ {
+ compatible = "google,tentacruel-sku327683", "google,tentacruel", "mediatek,mt8186";
+};
+
+/* This variant replaces only the trackpad controller. */
+&i2c2 {
+ /delete-node/ trackpad@15;
+
+ trackpad@15 {
+ compatible = "hid-over-i2c";
+ reg = <0x15>;
+ interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
+ hid-descr-addr = <0x0001>;
+ vdd-supply = <&pp3300_s3>;
+ wakeup-source;
+ };
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts
new file mode 100644
index 000000000000..26d3451a5e47
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-krabby.dtsi"
+
+/ {
+ model = "Google Tentacruel board";
+ compatible = "google,tentacruel-sku262147", "google,tentacruel-sku262146",
+ "google,tentacruel-sku262145", "google,tentacruel-sku262144",
+ "google,tentacruel", "mediatek,mt8186";
+ chassis-type = "convertible";
+};
+
+&keyboard_controller {
+ function-row-physmap = <
+ MATRIX_KEY(0x00, 0x02, 0) /* T1 */
+ MATRIX_KEY(0x03, 0x02, 0) /* T2 */
+ MATRIX_KEY(0x02, 0x02, 0) /* T3 */
+ MATRIX_KEY(0x01, 0x02, 0) /* T4 */
+ MATRIX_KEY(0x03, 0x04, 0) /* T5 */
+ MATRIX_KEY(0x02, 0x04, 0) /* T6 */
+ MATRIX_KEY(0x01, 0x04, 0) /* T7 */
+ MATRIX_KEY(0x02, 0x09, 0) /* T8 */
+ MATRIX_KEY(0x01, 0x09, 0) /* T9 */
+ MATRIX_KEY(0x00, 0x04, 0) /* T10 */
+ >;
+
+ linux,keymap = <
+ MATRIX_KEY(0x00, 0x02, KEY_BACK)
+ MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+ MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+ MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+ MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+ MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+ MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+ MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+ MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+ MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+ CROS_STD_MAIN_KEYMAP
+ >;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts
new file mode 100644
index 000000000000..447b57b12b41
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+#include "mt8186-corsola-tentacruel-sku262144.dts"
+
+/ {
+ compatible = "google,tentacruel-sku262151", "google,tentacruel-sku262150",
+ "google,tentacruel-sku262149", "google,tentacruel-sku262148",
+ "google,tentacruel", "mediatek,mt8186";
+};
+
+/* This variant replaces only the trackpad controller. */
+&i2c2 {
+ /delete-node/ trackpad@15;
+
+ trackpad@15 {
+ compatible = "hid-over-i2c";
+ reg = <0x15>;
+ interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
+ hid-descr-addr = <0x0001>;
+ vdd-supply = <&pp3300_s3>;
+ wakeup-source;
+ };
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
new file mode 100644
index 000000000000..3dea28f1d806
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
@@ -0,0 +1,1681 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2022 MediaTek Inc.
+ */
+/dts-v1/;
+#include "mt8186.dtsi"
+#include <dt-bindings/pinctrl/mt8186-pinfunc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/regulator/mediatek,mt6397-regulator.h>
+
+/ {
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c5 = &i2c5;
+ mmc0 = &mmc0;
+ mmc1 = &mmc1;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ /* The size should be filled in by the bootloader. */
+ reg = <0 0x40000000 0 0>;
+ };
+
+ backlight_lcd0: backlight-lcd0 {
+ compatible = "pwm-backlight";
+ pwms = <&pwm0 0 500000>;
+ power-supply = <&ppvar_sys>;
+ enable-gpios = <&pio 152 0>;
+ brightness-levels = <0 1023>;
+ num-interpolated-steps = <1023>;
+ default-brightness-level = <576>;
+ };
+
+ bt-sco-codec {
+ compatible = "linux,bt-sco";
+ #sound-dai-cells = <0>;
+ };
+
+ dmic-codec {
+ compatible = "dmic-codec";
+ #sound-dai-cells = <0>;
+ num-channels = <2>;
+ wakeup-delay-ms = <50>;
+ };
+
+ gpio_keys: gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pen_eject>;
+
+ pen_insert: pen-insert-switch {
+ label = "Pen Insert";
+ /* Insert = low, eject = high */
+ gpios = <&pio 18 GPIO_ACTIVE_LOW>;
+ wakeup-event-action = <EV_ACT_DEASSERTED>;
+ wakeup-source;
+ linux,code = <SW_PEN_INSERTED>;
+ linux,input-type = <EV_SW>;
+ };
+ };
+
+ pp1800_dpbrdg_dx: regulator-pp1800-dpbrdg-dx {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&en_pp1800_dpbrdg>;
+ gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
+ regulator-name = "pp1800_dpbrdg_dx";
+ enable-active-high;
+ vin-supply = <&mt6366_vio18_reg>;
+ };
+
+ pp3300_disp_x: regulator-pp3300-disp-x {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&edp_panel_fixed_pins>;
+ gpios = <&pio 153 GPIO_ACTIVE_HIGH>;
+ regulator-name = "pp3300_disp_x";
+ enable-active-high;
+ regulator-boot-on;
+ vin-supply = <&pp3300_z2>;
+ };
+
+ /* system wide LDO 3.3V power rail */
+ pp3300_z5: regulator-pp3300-ldo-z5 {
+ compatible = "regulator-fixed";
+ regulator-name = "pp3300_ldo_z5";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&ppvar_sys>;
+ };
+
+ /* separately switched 3.3V power rail */
+ pp3300_s3: regulator-pp3300-s3 {
+ compatible = "regulator-fixed";
+ regulator-name = "pp3300_s3";
+ /* automatically sequenced by PMIC EXT_PMIC_EN2 */
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&pp3300_z2>;
+ };
+
+ /* system wide 3.3V power rail */
+ pp3300_z2: regulator-pp3300-z2 {
+ compatible = "regulator-fixed";
+ regulator-name = "pp3300_z2";
+ /* EN pin tied to pp4200_z2, which is controlled by EC */
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&ppvar_sys>;
+ };
+
+ /* system wide 4.2V power rail */
+ pp4200_z2: regulator-pp4200-z2 {
+ compatible = "regulator-fixed";
+ regulator-name = "pp4200_z2";
+ /* controlled by EC */
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <4200000>;
+ regulator-max-microvolt = <4200000>;
+ vin-supply = <&ppvar_sys>;
+ };
+
+ /* system wide switching 5.0V power rail */
+ pp5000_z2: regulator-pp5000-z2 {
+ compatible = "regulator-fixed";
+ regulator-name = "pp5000_z2";
+ /* controlled by EC */
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&ppvar_sys>;
+ };
+
+ /* system wide semi-regulated power rail from battery or USB */
+ ppvar_sys: regulator-ppvar-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "ppvar_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reserved_memory: reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ adsp_dma_mem: memory@61000000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0x61000000 0 0x100000>;
+ no-map;
+ };
+
+ adsp_mem: memory@60000000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0x60000000 0 0xA00000>;
+ no-map;
+ };
+
+ scp_mem: memory@50000000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0x50000000 0 0x10a0000>;
+ no-map;
+ };
+ };
+
+ sound: sound {
+ compatible = "mediatek,mt8186-mt6366-rt1019-rt5682s-sound";
+ pinctrl-names = "aud_clk_mosi_off",
+ "aud_clk_mosi_on",
+ "aud_clk_miso_off",
+ "aud_clk_miso_on",
+ "aud_dat_miso_off",
+ "aud_dat_miso_on",
+ "aud_dat_mosi_off",
+ "aud_dat_mosi_on",
+ "aud_gpio_i2s0_off",
+ "aud_gpio_i2s0_on",
+ "aud_gpio_i2s1_off",
+ "aud_gpio_i2s1_on",
+ "aud_gpio_i2s2_off",
+ "aud_gpio_i2s2_on",
+ "aud_gpio_i2s3_off",
+ "aud_gpio_i2s3_on",
+ "aud_gpio_pcm_off",
+ "aud_gpio_pcm_on",
+ "aud_gpio_dmic_sec";
+ pinctrl-0 = <&aud_clk_mosi_off>;
+ pinctrl-1 = <&aud_clk_mosi_on>;
+ pinctrl-2 = <&aud_clk_miso_off>;
+ pinctrl-3 = <&aud_clk_miso_on>;
+ pinctrl-4 = <&aud_dat_miso_off>;
+ pinctrl-5 = <&aud_dat_miso_on>;
+ pinctrl-6 = <&aud_dat_mosi_off>;
+ pinctrl-7 = <&aud_dat_mosi_on>;
+ pinctrl-8 = <&aud_gpio_i2s0_off>;
+ pinctrl-9 = <&aud_gpio_i2s0_on>;
+ pinctrl-10 = <&aud_gpio_i2s1_off>;
+ pinctrl-11 = <&aud_gpio_i2s1_on>;
+ pinctrl-12 = <&aud_gpio_i2s2_off>;
+ pinctrl-13 = <&aud_gpio_i2s2_on>;
+ pinctrl-14 = <&aud_gpio_i2s3_off>;
+ pinctrl-15 = <&aud_gpio_i2s3_on>;
+ pinctrl-16 = <&aud_gpio_pcm_off>;
+ pinctrl-17 = <&aud_gpio_pcm_on>;
+ pinctrl-18 = <&aud_gpio_dmic_sec>;
+ mediatek,adsp = <&adsp>;
+ mediatek,platform = <&afe>;
+
+ playback-codecs {
+ sound-dai = <&it6505dptx>, <&rt1019p>;
+ };
+
+ headset-codec {
+ sound-dai = <&rt5682s 0>;
+ };
+ };
+
+ rt1019p: speaker-codec {
+ compatible = "realtek,rt1019p";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rt1019p_pins_default>;
+ #sound-dai-cells = <0>;
+ sdb-gpios = <&pio 150 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb_p1_vbus: regulator-usb-p1-vbus {
+ compatible = "regulator-fixed";
+ gpio = <&pio 148 GPIO_ACTIVE_HIGH>;
+ regulator-name = "vbus1";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ vin-supply = <&pp5000_z2>;
+ };
+
+ wifi_pwrseq: wifi-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_pin>;
+ post-power-on-delay-ms = <50>;
+ reset-gpios = <&pio 54 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi_wakeup: wifi-wakeup {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_wakeup_pin>;
+
+ wowlan-event {
+ label = "Wake on WiFi";
+ gpios = <&pio 7 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WAKEUP>;
+ wakeup-source;
+ };
+ };
+};
+
+&adsp {
+ memory-region = <&adsp_dma_mem>, <&adsp_mem>;
+ status = "okay";
+};
+
+&afe {
+ status = "okay";
+};
+
+&cci {
+ proc-supply = <&mt6366_vproc12_reg>;
+};
+
+&cpu0 {
+ proc-supply = <&mt6366_vproc12_reg>;
+};
+
+&cpu1 {
+ proc-supply = <&mt6366_vproc12_reg>;
+};
+
+&cpu2 {
+ proc-supply = <&mt6366_vproc12_reg>;
+};
+
+&cpu3 {
+ proc-supply = <&mt6366_vproc12_reg>;
+};
+
+&cpu4 {
+ proc-supply = <&mt6366_vproc12_reg>;
+};
+
+&cpu5 {
+ proc-supply = <&mt6366_vproc12_reg>;
+};
+
+&cpu6 {
+ proc-supply = <&mt6366_vproc11_reg>;
+};
+
+&cpu7 {
+ proc-supply = <&mt6366_vproc11_reg>;
+};
+
+&dpi {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&dpi_pins_default>;
+ pinctrl-1 = <&dpi_pins_sleep>;
+ status = "okay";
+};
+
+&dpi_out {
+ remote-endpoint = <&it6505_in>;
+};
+
+&dsi0 {
+ status = "okay";
+};
+
+&gic {
+ mediatek,broken-save-restore-fw;
+};
+
+&gpu {
+ mali-supply = <&mt6366_vgpu_reg>;
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ clock-frequency = <400000>;
+ i2c-scl-internal-delay-ns = <8000>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ /*
+ * Trackpad pin put here to work around second source components
+ * sharing the pinmux in steelix designs.
+ */
+ pinctrl-0 = <&i2c2_pins>, <&trackpad_pin>;
+ clock-frequency = <400000>;
+ i2c-scl-internal-delay-ns = <10000>;
+ status = "okay";
+
+ trackpad@15 {
+ compatible = "elan,ekth3000";
+ reg = <0x15>;
+ interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
+ vcc-supply = <&pp3300_s3>;
+ wakeup-source;
+ };
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+ clock-frequency = <100000>;
+ status = "okay";
+
+ it6505dptx: dp-bridge@5c {
+ compatible = "ite,it6505";
+ reg = <0x5c>;
+ interrupts-extended = <&pio 8 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&it6505_pins>;
+ #sound-dai-cells = <0>;
+ ovdd-supply = <&mt6366_vsim2_reg>;
+ pwr18-supply = <&pp1800_dpbrdg_dx>;
+ reset-gpios = <&pio 177 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ it6505_in: endpoint {
+ link-frequencies = /bits/ 64 <150000000>;
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+ };
+ };
+};
+
+&i2c5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c5_pins>;
+ status = "okay";
+
+ rt5682s: codec@1a {
+ compatible = "realtek,rt5682s";
+ reg = <0x1a>;
+ interrupts-extended = <&pio 17 IRQ_TYPE_EDGE_BOTH>;
+ #sound-dai-cells = <1>;
+ AVDD-supply = <&mt6366_vio18_reg>;
+ DBVDD-supply = <&mt6366_vio18_reg>;
+ LDO1-IN-supply = <&mt6366_vio18_reg>;
+ MICVDD-supply = <&pp3300_z2>;
+ realtek,jd-src = <1>;
+ };
+};
+
+&mfg0 {
+ domain-supply = <&mt6366_vsram_gpu_reg>;
+};
+
+&mfg1 {
+ domain-supply = <&mt6366_vgpu_reg>;
+};
+
+&mipi_tx0 {
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&mmc0_pins_default>;
+ pinctrl-1 = <&mmc0_pins_uhs>;
+ bus-width = <8>;
+ max-frequency = <200000000>;
+ non-removable;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ supports-cqe;
+ no-sd;
+ no-sdio;
+ cap-mmc-hw-reset;
+ hs400-ds-delay = <0x11814>;
+ mediatek,hs400-ds-dly3 = <0x14>;
+ vmmc-supply = <&mt6366_vemc_reg>;
+ vqmmc-supply = <&mt6366_vio18_reg>;
+ status = "okay";
+};
+
+&mmc1 {
+ pinctrl-names = "default", "state_uhs", "state_eint";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_uhs>;
+ pinctrl-2 = <&mmc1_pins_eint>;
+ /delete-property/ interrupts;
+ interrupt-names = "msdc", "sdio_wakeup";
+ interrupts-extended = <&gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH 0>,
+ <&pio 87 IRQ_TYPE_LEVEL_LOW>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus-width = <4>;
+ max-frequency = <200000000>;
+ cap-sd-highspeed;
+ sd-uhs-sdr104;
+ sd-uhs-sdr50;
+ keep-power-in-suspend;
+ wakeup-source;
+ cap-sdio-irq;
+ no-mmc;
+ no-sd;
+ non-removable;
+ vmmc-supply = <&pp3300_s3>;
+ vqmmc-supply = <&mt6366_vio18_reg>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ status = "okay";
+
+ bluetooth@2 {
+ compatible = "mediatek,mt7921s-bluetooth";
+ reg = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_pins_reset>;
+ reset-gpios = <&pio 155 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&nor_flash {
+ assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D7_D4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&nor_pins_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <39000000>;
+ };
+};
+
+&pio {
+ /* 185 lines */
+ gpio-line-names = "TP",
+ "TP",
+ "TP",
+ "I2S0_HP_DI",
+ "I2S3_DP_SPKR_DO",
+ "SAR_INT_ODL",
+ "BT_WAKE_AP_ODL",
+ "WIFI_INT_ODL",
+ "DPBRDG_INT_ODL",
+ "EDPBRDG_INT_ODL",
+ "EC_AP_HPD_OD",
+ "TCHPAD_INT_ODL",
+ "TCHSCR_INT_1V8_ODL",
+ "EC_AP_INT_ODL",
+ "EC_IN_RW_ODL",
+ "GSC_AP_INT_ODL",
+ /* AP_FLASH_WP_L is crossystem ABI. Rev1 schematics call it AP_WP_ODL. */
+ "AP_FLASH_WP_L",
+ "HP_INT_ODL",
+ "PEN_EJECT_OD",
+ "WCAM_PWDN_L",
+ "WCAM_RST_L",
+ "UCAM_SEN_EN",
+ "UCAM_RST_L",
+ "LTE_RESET_L",
+ "LTE_SAR_DETECT_L",
+ "I2S2_DP_SPK_MCK",
+ "I2S2_DP_SPKR_BCK",
+ "I2S2_DP_SPKR_LRCK",
+ "I2S2_DP_SPKR_DI (TP)",
+ "EN_PP1000_EDPBRDG",
+ "EN_PP1800_EDPBRDG",
+ "EN_PP3300_EDPBRDG",
+ "UART_GSC_TX_AP_RX",
+ "UART_AP_TX_GSC_RX",
+ "UART_DBGCON_TX_ADSP_RX",
+ "UART_ADSP_TX_DBGCON_RX",
+ "EN_PP1000_DPBRDG",
+ "TCHSCR_REPORT_DISABLE",
+ "EN_PP3300_DPBRDG",
+ "EN_PP1800_DPBRDG",
+ "SPI_AP_CLK_EC",
+ "SPI_AP_CS_EC_L",
+ "SPI_AP_DO_EC_DI",
+ "SPI_AP_DI_EC_DO",
+ "SPI_AP_CLK_GSC",
+ "SPI_AP_CS_GSC_L",
+ "SPI_AP_DO_GSC_DI",
+ "SPI_AP_DI_GSC_DO",
+ "UART_DBGCON_TX_SCP_RX",
+ "UART_SCP_TX_DBGCON_RX",
+ "EN_PP1200_CAM_X",
+ "EN_PP2800A_VCM_X",
+ "EN_PP2800A_UCAM_X",
+ "EN_PP2800A_WCAM_X",
+ "WLAN_MODULE_RST_L",
+ "EN_PP1200_UCAM_X",
+ "I2S1_HP_DO",
+ "I2S1_HP_BCK",
+ "I2S1_HP_LRCK",
+ "I2S1_HP_MCK",
+ "TCHSCR_RST_1V8_L",
+ "SPI_AP_CLK_ROM",
+ "SPI_AP_CS_ROM_L",
+ "SPI_AP_DO_ROM_DI",
+ "SPI_AP_DI_ROM_DO",
+ "NC",
+ "NC",
+ "EMMC_STRB",
+ "EMMC_CLK",
+ "EMMC_CMD",
+ "EMMC_RST_L",
+ "EMMC_DATA0",
+ "EMMC_DATA1",
+ "EMMC_DATA2",
+ "EMMC_DATA3",
+ "EMMC_DATA4",
+ "EMMC_DATA5",
+ "EMMC_DATA6",
+ "EMMC_DATA7",
+ "AP_KPCOL0",
+ "NC",
+ "NC",
+ "NC",
+ "TP",
+ "SDIO_CLK",
+ "SDIO_CMD",
+ "SDIO_DATA0",
+ "SDIO_DATA1",
+ "SDIO_DATA2",
+ "SDIO_DATA3",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "EDPBRDG_PWREN",
+ "BL_PWM_1V8",
+ "EDPBRDG_RST_L",
+ "MIPI_DPI_CLK",
+ "MIPI_DPI_VSYNC",
+ "MIPI_DPI_HSYNC",
+ "MIPI_DPI_DE",
+ "MIPI_DPI_D0",
+ "MIPI_DPI_D1",
+ "MIPI_DPI_D2",
+ "MIPI_DPI_D3",
+ "MIPI_DPI_D4",
+ "MIPI_DPI_D5",
+ "MIPI_DPI_D6",
+ "MIPI_DPI_DA7",
+ "MIPI_DPI_D8",
+ "MIPI_DPI_D9",
+ "MIPI_DPI_D10",
+ "MIPI_DPI_D11",
+ "PCM_BT_CLK",
+ "PCM_BT_SYNC",
+ "PCM_BT_DI",
+ "PCM_BT_DO",
+ "JTAG_TMS_TP",
+ "JTAG_TCK_TP",
+ "JTAG_TDI_TP",
+ "JTAG_TDO_TP",
+ "JTAG_TRSTN_TP",
+ "CLK_24M_WCAM",
+ "CLK_24M_UCAM",
+ "UCAM_DET_ODL",
+ "AP_I2C_EDPBRDG_SCL_1V8",
+ "AP_I2C_EDPBRDG_SDA_1V8",
+ "AP_I2C_TCHSCR_SCL_1V8",
+ "AP_I2C_TCHSCR_SDA_1V8",
+ "AP_I2C_TCHPAD_SCL_1V8",
+ "AP_I2C_TCHPAD_SDA_1V8",
+ "AP_I2C_DPBRDG_SCL_1V8",
+ "AP_I2C_DPBRDG_SDA_1V8",
+ "AP_I2C_WLAN_SCL_1V8",
+ "AP_I2C_WLAN_SDA_1V8",
+ "AP_I2C_AUD_SCL_1V8",
+ "AP_I2C_AUD_SDA_1V8",
+ "AP_I2C_TPM_SCL_1V8",
+ "AP_I2C_UCAM_SDA_1V8",
+ "AP_I2C_UCAM_SCL_1V8",
+ "AP_I2C_UCAM_SDA_1V8",
+ "AP_I2C_WCAM_SCL_1V8",
+ "AP_I2C_WCAM_SDA_1V8",
+ "SCP_I2C_SENSOR_SCL_1V8",
+ "SCP_I2C_SENSOR_SDA_1V8",
+ "AP_EC_WARM_RST_REQ",
+ "AP_XHCI_INIT_DONE",
+ "USB3_HUB_RST_L",
+ "EN_SPKR",
+ "BEEP_ON",
+ "AP_EDP_BKLTEN",
+ "EN_PP3300_DISP_X",
+ "EN_PP3300_SDBRDG_X",
+ "BT_KILL_1V8_L",
+ "WIFI_KILL_1V8_L",
+ "PWRAP_SPI0_CSN",
+ "PWRAP_SPI0_CK",
+ "PWRAP_SPI0_MO",
+ "PWRAP_SPI0_MI",
+ "SRCLKENA0",
+ "SRCLKENA1",
+ "SCP_VREQ_VAO",
+ "AP_RTC_CLK32K",
+ "AP_PMIC_WDTRST_L",
+ "AUD_CLK_MOSI",
+ "AUD_SYNC_MOSI",
+ "AUD_DAT_MOSI0",
+ "AUD_DAT_MOSI1",
+ "AUD_CLK_MISO",
+ "AUD_SYNC_MISO",
+ "AUD_DAT_MISO0",
+ "AUD_DAT_MISO1",
+ "NC",
+ "NC",
+ "DPBRDG_PWREN",
+ "DPBRDG_RST_L",
+ "LTE_W_DISABLE_L",
+ "LTE_SAR_DETECT_L",
+ "EN_PP3300_LTE_X",
+ "LTE_PWR_OFF_L",
+ "LTE_RESET_L",
+ "TP",
+ "TP";
+
+ aud_clk_mosi_off: aud-clk-mosi-off-pins {
+ pins-clk-sync {
+ pinmux = <PINMUX_GPIO166__FUNC_GPIO166>,
+ <PINMUX_GPIO167__FUNC_GPIO167>;
+ input-enable;
+ bias-pull-down;
+ };
+ };
+
+ aud_clk_mosi_on: aud-clk-mosi-on-pins {
+ pins-clk-sync {
+ pinmux = <PINMUX_GPIO166__FUNC_AUD_CLK_MOSI>,
+ <PINMUX_GPIO167__FUNC_AUD_SYNC_MOSI>;
+ };
+ };
+
+ aud_clk_miso_off: aud-clk-miso-off-pins {
+ pins-clk-sync {
+ pinmux = <PINMUX_GPIO170__FUNC_GPIO170>,
+ <PINMUX_GPIO171__FUNC_GPIO171>;
+ input-enable;
+ bias-pull-down;
+ };
+ };
+
+ aud_clk_miso_on: aud-clk-miso-on-pins {
+ pins-clk-sync {
+ pinmux = <PINMUX_GPIO170__FUNC_AUD_CLK_MISO>,
+ <PINMUX_GPIO171__FUNC_AUD_SYNC_MISO>;
+ };
+ };
+
+ aud_dat_mosi_off: aud-dat-mosi-off-pins {
+ pins-dat {
+ pinmux = <PINMUX_GPIO168__FUNC_GPIO168>,
+ <PINMUX_GPIO169__FUNC_GPIO169>;
+ input-enable;
+ bias-pull-down;
+ };
+ };
+
+ aud_dat_mosi_on: aud-dat-mosi-on-pins {
+ pins-dat {
+ pinmux = <PINMUX_GPIO168__FUNC_AUD_DAT_MOSI0>,
+ <PINMUX_GPIO169__FUNC_AUD_DAT_MOSI1>;
+ };
+ };
+
+ aud_dat_miso_off: aud-dat-miso-off-pins {
+ pins-dat {
+ pinmux = <PINMUX_GPIO172__FUNC_GPIO172>,
+ <PINMUX_GPIO173__FUNC_GPIO173>;
+ input-enable;
+ bias-pull-down;
+ };
+ };
+
+ aud_dat_miso_on: aud-dat-miso-on-pins {
+ pins-dat {
+ pinmux = <PINMUX_GPIO172__FUNC_AUD_DAT_MISO0>,
+ <PINMUX_GPIO173__FUNC_AUD_DAT_MISO1>;
+ input-schmitt-enable;
+ bias-disable;
+ };
+ };
+
+ aud_gpio_i2s0_off: aud-gpio-i2s0-off-pins {
+ pins-sdata {
+ pinmux = <PINMUX_GPIO3__FUNC_GPIO3>;
+ };
+ };
+
+ aud_gpio_i2s0_on: aud-gpio-i2s0-on-pins {
+ pins-sdata {
+ pinmux = <PINMUX_GPIO3__FUNC_I2S0_DI>;
+ };
+ };
+
+ aud_gpio_i2s1_off: aud-gpio-i2s-off-pins {
+ pins-clk-sdata {
+ pinmux = <PINMUX_GPIO56__FUNC_GPIO56>,
+ <PINMUX_GPIO57__FUNC_GPIO57>,
+ <PINMUX_GPIO58__FUNC_GPIO58>,
+ <PINMUX_GPIO59__FUNC_GPIO59>;
+ output-low;
+ };
+ };
+
+ aud_gpio_i2s1_on: aud-gpio-i2s1-on-pins {
+ pins-clk-sdata {
+ pinmux = <PINMUX_GPIO56__FUNC_I2S1_DO>,
+ <PINMUX_GPIO57__FUNC_I2S1_BCK>,
+ <PINMUX_GPIO58__FUNC_I2S1_LRCK>,
+ <PINMUX_GPIO59__FUNC_I2S1_MCK>;
+ };
+ };
+
+ aud_gpio_i2s2_off: aud-gpio-i2s2-off-pins {
+ pins-cmd-dat {
+ pinmux = <PINMUX_GPIO26__FUNC_GPIO26>,
+ <PINMUX_GPIO27__FUNC_GPIO27>;
+ output-low;
+ };
+ };
+
+ aud_gpio_i2s2_on: aud-gpio-i2s2-on-pins {
+ pins-clk {
+ pinmux = <PINMUX_GPIO26__FUNC_I2S2_BCK>,
+ <PINMUX_GPIO27__FUNC_I2S2_LRCK>;
+ drive-strength = <4>;
+ };
+ };
+
+ aud_gpio_i2s3_off: aud-gpio-i2s3-off-pins {
+ pins-sdata {
+ pinmux = <PINMUX_GPIO4__FUNC_GPIO4>;
+ output-low;
+ };
+ };
+
+ aud_gpio_i2s3_on: aud-gpio-i2s3-on-pins {
+ pins-sdata {
+ pinmux = <PINMUX_GPIO4__FUNC_I2S3_DO>;
+ drive-strength = <4>;
+ };
+ };
+
+ aud_gpio_pcm_off: aud-gpio-pcm-off-pins {
+ pins-clk-sdata {
+ pinmux = <PINMUX_GPIO115__FUNC_GPIO115>,
+ <PINMUX_GPIO116__FUNC_GPIO116>,
+ <PINMUX_GPIO117__FUNC_GPIO117>,
+ <PINMUX_GPIO118__FUNC_GPIO118>;
+ output-low;
+ };
+ };
+
+ aud_gpio_pcm_on: aud-gpio-pcm-on-pins {
+ pins-clk-sdata {
+ pinmux = <PINMUX_GPIO115__FUNC_PCM_CLK>,
+ <PINMUX_GPIO116__FUNC_PCM_SYNC>,
+ <PINMUX_GPIO117__FUNC_PCM_DI>,
+ <PINMUX_GPIO118__FUNC_PCM_DO>;
+ };
+ };
+
+ aud_gpio_dmic_sec: aud-gpio-dmic-sec-pins {
+ pins {
+ pinmux = <PINMUX_GPIO23__FUNC_GPIO23>;
+ output-low;
+ };
+ };
+
+ bt_pins_reset: bt-reset-pins {
+ pins-bt-reset {
+ pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
+ output-high;
+ };
+ };
+
+ dpi_pins_sleep: dpi-sleep-pins {
+ pins-cmd-dat {
+ pinmux = <PINMUX_GPIO103__FUNC_GPIO103>,
+ <PINMUX_GPIO104__FUNC_GPIO104>,
+ <PINMUX_GPIO105__FUNC_GPIO105>,
+ <PINMUX_GPIO106__FUNC_GPIO106>,
+ <PINMUX_GPIO107__FUNC_GPIO107>,
+ <PINMUX_GPIO108__FUNC_GPIO108>,
+ <PINMUX_GPIO109__FUNC_GPIO109>,
+ <PINMUX_GPIO110__FUNC_GPIO110>,
+ <PINMUX_GPIO111__FUNC_GPIO111>,
+ <PINMUX_GPIO112__FUNC_GPIO112>,
+ <PINMUX_GPIO113__FUNC_GPIO113>,
+ <PINMUX_GPIO114__FUNC_GPIO114>,
+ <PINMUX_GPIO101__FUNC_GPIO101>,
+ <PINMUX_GPIO100__FUNC_GPIO100>,
+ <PINMUX_GPIO102__FUNC_GPIO102>,
+ <PINMUX_GPIO99__FUNC_GPIO99>;
+ drive-strength = <10>;
+ output-low;
+ };
+ };
+
+ dpi_pins_default: dpi-default-pins {
+ pins-cmd-dat {
+ pinmux = <PINMUX_GPIO103__FUNC_DPI_DATA0>,
+ <PINMUX_GPIO104__FUNC_DPI_DATA1>,
+ <PINMUX_GPIO105__FUNC_DPI_DATA2>,
+ <PINMUX_GPIO106__FUNC_DPI_DATA3>,
+ <PINMUX_GPIO107__FUNC_DPI_DATA4>,
+ <PINMUX_GPIO108__FUNC_DPI_DATA5>,
+ <PINMUX_GPIO109__FUNC_DPI_DATA6>,
+ <PINMUX_GPIO110__FUNC_DPI_DATA7>,
+ <PINMUX_GPIO111__FUNC_DPI_DATA8>,
+ <PINMUX_GPIO112__FUNC_DPI_DATA9>,
+ <PINMUX_GPIO113__FUNC_DPI_DATA10>,
+ <PINMUX_GPIO114__FUNC_DPI_DATA11>,
+ <PINMUX_GPIO101__FUNC_DPI_HSYNC>,
+ <PINMUX_GPIO100__FUNC_DPI_VSYNC>,
+ <PINMUX_GPIO102__FUNC_DPI_DE>,
+ <PINMUX_GPIO99__FUNC_DPI_PCLK>;
+ drive-strength = <10>;
+ };
+ };
+
+ ec_ap_int: cros-ec-int-pins {
+ pins-ec-ap-int-odl {
+ pinmux = <PINMUX_GPIO13__FUNC_GPIO13>;
+ input-enable;
+ };
+ };
+
+ edp_panel_fixed_pins: edp-panel-fixed-pins {
+ pins-vreg-en {
+ pinmux = <PINMUX_GPIO153__FUNC_GPIO153>;
+ output-high;
+ };
+ };
+
+ en_pp1800_dpbrdg: en-pp1800-dpbrdg-pins {
+ pins-vreg-en {
+ pinmux = <PINMUX_GPIO39__FUNC_GPIO39>;
+ output-low;
+ };
+ };
+
+ gsc_int: gsc-int-pins {
+ pins-gsc-ap-int-odl {
+ pinmux = <PINMUX_GPIO15__FUNC_GPIO15>;
+ input-enable;
+ };
+ };
+
+ i2c0_pins: i2c0-pins {
+ pins-bus {
+ pinmux = <PINMUX_GPIO128__FUNC_SDA0>,
+ <PINMUX_GPIO127__FUNC_SCL0>;
+ bias-disable;
+ drive-strength = <4>;
+ input-enable;
+ };
+ };
+
+ i2c1_pins: i2c1-pins {
+ pins-bus {
+ pinmux = <PINMUX_GPIO130__FUNC_SDA1>,
+ <PINMUX_GPIO129__FUNC_SCL1>;
+ bias-disable;
+ drive-strength = <4>;
+ input-enable;
+ };
+ };
+
+ i2c2_pins: i2c2-pins {
+ pins-bus {
+ pinmux = <PINMUX_GPIO132__FUNC_SDA2>,
+ <PINMUX_GPIO131__FUNC_SCL2>;
+ bias-disable;
+ drive-strength = <4>;
+ input-enable;
+ };
+ };
+
+ i2c3_pins: i2c3-pins {
+ pins-bus {
+ pinmux = <PINMUX_GPIO134__FUNC_SDA3>,
+ <PINMUX_GPIO133__FUNC_SCL3>;
+ bias-disable;
+ drive-strength = <4>;
+ input-enable;
+ };
+ };
+
+ i2c5_pins: i2c5-pins {
+ pins-bus {
+ pinmux = <PINMUX_GPIO138__FUNC_SDA5>,
+ <PINMUX_GPIO137__FUNC_SCL5>;
+ bias-disable;
+ drive-strength = <4>;
+ input-enable;
+ };
+ };
+
+ it6505_pins: it6505-pins {
+ pins-hpd {
+ pinmux = <PINMUX_GPIO10__FUNC_GPIO10>;
+ input-enable;
+ bias-pull-up;
+ };
+
+ pins-int {
+ pinmux = <PINMUX_GPIO8__FUNC_GPIO8>;
+ input-enable;
+ bias-pull-up;
+ };
+
+ pins-reset {
+ pinmux = <PINMUX_GPIO177__FUNC_GPIO177>;
+ output-low;
+ bias-pull-up;
+ };
+ };
+
+ mmc0_pins_default: mmc0-default-pins {
+ pins-clk {
+ pinmux = <PINMUX_GPIO68__FUNC_MSDC0_CLK>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins-cmd-dat {
+ pinmux = <PINMUX_GPIO71__FUNC_MSDC0_DAT0>,
+ <PINMUX_GPIO72__FUNC_MSDC0_DAT1>,
+ <PINMUX_GPIO73__FUNC_MSDC0_DAT2>,
+ <PINMUX_GPIO74__FUNC_MSDC0_DAT3>,
+ <PINMUX_GPIO75__FUNC_MSDC0_DAT4>,
+ <PINMUX_GPIO76__FUNC_MSDC0_DAT5>,
+ <PINMUX_GPIO77__FUNC_MSDC0_DAT6>,
+ <PINMUX_GPIO78__FUNC_MSDC0_DAT7>,
+ <PINMUX_GPIO69__FUNC_MSDC0_CMD>;
+ input-enable;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+
+ pins-rst {
+ pinmux = <PINMUX_GPIO70__FUNC_MSDC0_RSTB>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+ };
+
+ mmc0_pins_uhs: mmc0-uhs-pins {
+ pins-clk {
+ pinmux = <PINMUX_GPIO68__FUNC_MSDC0_CLK>;
+ drive-strength = <6>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins-cmd-dat {
+ pinmux = <PINMUX_GPIO71__FUNC_MSDC0_DAT0>,
+ <PINMUX_GPIO72__FUNC_MSDC0_DAT1>,
+ <PINMUX_GPIO73__FUNC_MSDC0_DAT2>,
+ <PINMUX_GPIO74__FUNC_MSDC0_DAT3>,
+ <PINMUX_GPIO75__FUNC_MSDC0_DAT4>,
+ <PINMUX_GPIO76__FUNC_MSDC0_DAT5>,
+ <PINMUX_GPIO77__FUNC_MSDC0_DAT6>,
+ <PINMUX_GPIO78__FUNC_MSDC0_DAT7>,
+ <PINMUX_GPIO69__FUNC_MSDC0_CMD>;
+ input-enable;
+ drive-strength = <6>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+
+ pins-ds {
+ pinmux = <PINMUX_GPIO67__FUNC_MSDC0_DSL>;
+ drive-strength = <6>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins-rst {
+ pinmux = <PINMUX_GPIO70__FUNC_MSDC0_RSTB>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+ };
+
+ mmc1_pins_default: mmc1-default-pins {
+ pins-clk {
+ pinmux = <PINMUX_GPIO84__FUNC_MSDC1_CLK>;
+ drive-strength = <6>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins-cmd-dat {
+ pinmux = <PINMUX_GPIO86__FUNC_MSDC1_DAT0>,
+ <PINMUX_GPIO87__FUNC_MSDC1_DAT1>,
+ <PINMUX_GPIO88__FUNC_MSDC1_DAT2>,
+ <PINMUX_GPIO89__FUNC_MSDC1_DAT3>,
+ <PINMUX_GPIO85__FUNC_MSDC1_CMD>;
+ input-enable;
+ drive-strength = <6>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+ };
+
+ mmc1_pins_uhs: mmc1-uhs-pins {
+ pins-clk {
+ pinmux = <PINMUX_GPIO84__FUNC_MSDC1_CLK>;
+ drive-strength = <6>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins-cmd-dat {
+ pinmux = <PINMUX_GPIO86__FUNC_MSDC1_DAT0>,
+ <PINMUX_GPIO87__FUNC_MSDC1_DAT1>,
+ <PINMUX_GPIO88__FUNC_MSDC1_DAT2>,
+ <PINMUX_GPIO89__FUNC_MSDC1_DAT3>,
+ <PINMUX_GPIO85__FUNC_MSDC1_CMD>;
+ input-enable;
+ drive-strength = <8>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+ };
+
+ mmc1_pins_eint: mmc1-eint-pins {
+ pins-dat1 {
+ pinmux = <PINMUX_GPIO87__FUNC_GPIO87>;
+ input-enable;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+ };
+
+ nor_pins_default: nor-default-pins {
+ pins-clk-dat {
+ pinmux = <PINMUX_GPIO63__FUNC_SPINOR_IO0>,
+ <PINMUX_GPIO61__FUNC_SPINOR_CK>,
+ <PINMUX_GPIO64__FUNC_SPINOR_IO1>;
+ drive-strength = <6>;
+ bias-pull-down;
+ };
+
+ pins-cs-dat {
+ pinmux = <PINMUX_GPIO62__FUNC_SPINOR_CS>,
+ <PINMUX_GPIO65__FUNC_SPINOR_IO2>,
+ <PINMUX_GPIO66__FUNC_SPINOR_IO3>;
+ drive-strength = <6>;
+ bias-pull-up;
+ };
+ };
+
+ pen_eject: pen-eject-pins {
+ pins {
+ pinmux = <PINMUX_GPIO18__FUNC_GPIO18>;
+ input-enable;
+ /* External pull-up. */
+ bias-disable;
+ };
+ };
+
+ pwm0_pin: disp-pwm-pins {
+ pins {
+ pinmux = <PINMUX_GPIO97__FUNC_DISP_PWM>;
+ output-high;
+ };
+ };
+
+ rt1019p_pins_default: rt1019p-default-pins {
+ pins-sdb {
+ pinmux = <PINMUX_GPIO150__FUNC_GPIO150>;
+ output-low;
+ };
+ };
+
+ scp_pins: scp-default-pins {
+ pins-scp-uart {
+ pinmux = <PINMUX_GPIO48__FUNC_TP_URXD2_AO>,
+ <PINMUX_GPIO49__FUNC_TP_UTXD2_AO>;
+ };
+ };
+
+ spi1_pins: spi1-pins {
+ pins-bus {
+ pinmux = <PINMUX_GPIO40__FUNC_SPI1_CLK_A>,
+ <PINMUX_GPIO41__FUNC_SPI1_CSB_A>,
+ <PINMUX_GPIO42__FUNC_SPI1_MO_A>,
+ <PINMUX_GPIO43__FUNC_SPI1_MI_A>;
+ bias-disable;
+ input-enable;
+ };
+ };
+
+ spi2_pins: spi2-pins {
+ pins-bus {
+ pinmux = <PINMUX_GPIO44__FUNC_SPI2_CLK_A>,
+ <PINMUX_GPIO45__FUNC_GPIO45>,
+ <PINMUX_GPIO46__FUNC_SPI2_MO_A>,
+ <PINMUX_GPIO47__FUNC_SPI2_MI_A>;
+ bias-disable;
+ input-enable;
+ };
+ };
+
+ spmi_pins: spmi-pins {
+ pins-bus {
+ pinmux = <PINMUX_GPIO183__FUNC_SPMI_SCL>,
+ <PINMUX_GPIO184__FUNC_SPMI_SDA>;
+ };
+ };
+
+ touchscreen_pins: touchscreen-pins {
+ pins-irq {
+ pinmux = <PINMUX_GPIO12__FUNC_GPIO12>;
+ input-enable;
+ bias-pull-up;
+ };
+
+ pins-reset {
+ pinmux = <PINMUX_GPIO60__FUNC_GPIO60>;
+ output-high;
+ };
+
+ pins-report-sw {
+ pinmux = <PINMUX_GPIO37__FUNC_GPIO37>;
+ output-low;
+ };
+ };
+
+ trackpad_pin: trackpad-default-pins {
+ pins-int-n {
+ pinmux = <PINMUX_GPIO11__FUNC_GPIO11>;
+ input-enable;
+ bias-disable; /* pulled externally */
+ };
+ };
+
+ wifi_enable_pin: wifi-enable-pins {
+ pins-wifi-enable {
+ pinmux = <PINMUX_GPIO54__FUNC_GPIO54>;
+ };
+ };
+
+ wifi_wakeup_pin: wifi-wakeup-pins {
+ pins-wifi-wakeup {
+ pinmux = <PINMUX_GPIO7__FUNC_GPIO7>;
+ input-enable;
+ };
+ };
+};
+
+&pwm0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pin>;
+ status = "okay";
+};
+
+&pwrap {
+ pmic {
+ compatible = "mediatek,mt6366", "mediatek,mt6358";
+ interrupt-controller;
+ interrupts-extended = <&pio 201 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
+
+ mt6366codec: codec {
+ compatible = "mediatek,mt6366-sound", "mediatek,mt6358-sound";
+ Avdd-supply = <&mt6366_vaud28_reg>;
+ mediatek,dmic-mode = <1>; /* one-wire */
+ };
+
+ mt6366_regulators: regulators {
+ compatible = "mediatek,mt6366-regulator", "mediatek,mt6358-regulator";
+ vsys-ldo1-supply = <&pp4200_z2>;
+ vsys-ldo2-supply = <&pp4200_z2>;
+ vsys-ldo3-supply = <&pp4200_z2>;
+ vsys-vcore-supply = <&pp4200_z2>;
+ vsys-vdram1-supply = <&pp4200_z2>;
+ vsys-vgpu-supply = <&pp4200_z2>;
+ vsys-vmodem-supply = <&pp4200_z2>;
+ vsys-vpa-supply = <&pp4200_z2>;
+ vsys-vproc11-supply = <&pp4200_z2>;
+ vsys-vproc12-supply = <&pp4200_z2>;
+ vsys-vs1-supply = <&pp4200_z2>;
+ vsys-vs2-supply = <&pp4200_z2>;
+ vs1-ldo1-supply = <&mt6366_vs1_reg>;
+ vs2-ldo1-supply = <&mt6366_vdram1_reg>;
+ vs2-ldo2-supply = <&mt6366_vs2_reg>;
+ vs2-ldo3-supply = <&mt6366_vs2_reg>;
+
+ vcore {
+ regulator-name = "pp0750_dvdd_core";
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <800000>;
+ regulator-ramp-delay = <6250>;
+ regulator-enable-ramp-delay = <200>;
+ regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO
+ MT6397_BUCK_MODE_FORCE_PWM>;
+ regulator-always-on;
+ };
+
+ mt6366_vdram1_reg: vdram1 {
+ regulator-name = "pp1125_emi_vdd2";
+ regulator-min-microvolt = <1125000>;
+ regulator-max-microvolt = <1125000>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <0>;
+ regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO
+ MT6397_BUCK_MODE_FORCE_PWM>;
+ regulator-always-on;
+ };
+
+ mt6366_vgpu_reg: vgpu {
+ /*
+ * Called "ppvar_dvdd_gpu" in the schematic.
+ * Called "ppvar_dvdd_vgpu" here to match
+ * regulator coupling requirements.
+ */
+ regulator-name = "ppvar_dvdd_vgpu";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <6250>;
+ regulator-enable-ramp-delay = <200>;
+ regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO
+ MT6397_BUCK_MODE_FORCE_PWM>;
+ regulator-coupled-with = <&mt6366_vsram_gpu_reg>;
+ regulator-coupled-max-spread = <10000>;
+ };
+
+ mt6366_vproc11_reg: vproc11 {
+ regulator-name = "ppvar_dvdd_proc_bc_mt6366";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-ramp-delay = <6250>;
+ regulator-enable-ramp-delay = <200>;
+ regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO
+ MT6397_BUCK_MODE_FORCE_PWM>;
+ regulator-always-on;
+ };
+
+ mt6366_vproc12_reg: vproc12 {
+ regulator-name = "ppvar_dvdd_proc_lc";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-ramp-delay = <6250>;
+ regulator-enable-ramp-delay = <200>;
+ regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO
+ MT6397_BUCK_MODE_FORCE_PWM>;
+ regulator-always-on;
+ };
+
+ mt6366_vs1_reg: vs1 {
+ regulator-name = "pp2000_vs1";
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <0>;
+ regulator-always-on;
+ };
+
+ mt6366_vs2_reg: vs2 {
+ regulator-name = "pp1350_vs2";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <0>;
+ regulator-always-on;
+ };
+
+ va12 {
+ regulator-name = "pp1200_va12";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-enable-ramp-delay = <270>;
+ regulator-always-on;
+ };
+
+ mt6366_vaud28_reg: vaud28 {
+ regulator-name = "pp2800_vaud28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <270>;
+ };
+
+ mt6366_vaux18_reg: vaux18 {
+ regulator-name = "pp1840_vaux18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1840000>;
+ regulator-enable-ramp-delay = <270>;
+ };
+
+ mt6366_vbif28_reg: vbif28 {
+ regulator-name = "pp2800_vbif28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <270>;
+ };
+
+ mt6366_vcn18_reg: vcn18 {
+ regulator-name = "pp1800_vcn18_x";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <270>;
+ };
+
+ mt6366_vcn28_reg: vcn28 {
+ regulator-name = "pp2800_vcn28_x";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <270>;
+ };
+
+ mt6366_vefuse_reg: vefuse {
+ regulator-name = "pp1800_vefuse";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <270>;
+ };
+
+ mt6366_vfe28_reg: vfe28 {
+ regulator-name = "pp2800_vfe28_x";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <270>;
+ };
+
+ mt6366_vemc_reg: vemc {
+ regulator-name = "pp3000_vemc";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <60>;
+ };
+
+ mt6366_vibr_reg: vibr {
+ regulator-name = "pp2800_vibr_x";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <60>;
+ };
+
+ mt6366_vio18_reg: vio18 {
+ regulator-name = "pp1800_vio18_s3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <2700>;
+ regulator-always-on;
+ };
+
+ mt6366_vio28_reg: vio28 {
+ regulator-name = "pp2800_vio28_x";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <270>;
+ };
+
+ mt6366_vm18_reg: vm18 {
+ regulator-name = "pp1800_emi_vdd1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1840000>;
+ regulator-enable-ramp-delay = <325>;
+ regulator-always-on;
+ };
+
+ mt6366_vmc_reg: vmc {
+ regulator-name = "pp3000_vmc";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <60>;
+ };
+
+ mt6366_vmddr_reg: vmddr {
+ regulator-name = "pm0750_emi_vmddr";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <750000>;
+ regulator-enable-ramp-delay = <325>;
+ regulator-always-on;
+ };
+
+ mt6366_vmch_reg: vmch {
+ regulator-name = "pp3000_vmch";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <60>;
+ };
+
+ mt6366_vcn33_reg: vcn33 {
+ regulator-name = "pp3300_vcn33_x";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <270>;
+ };
+
+ vdram2 {
+ regulator-name = "pp0600_emi_vddq";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <600000>;
+ regulator-enable-ramp-delay = <3300>;
+ regulator-always-on;
+ };
+
+ mt6366_vrf12_reg: vrf12 {
+ regulator-name = "pp1200_vrf12_x";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ mt6366_vrf18_reg: vrf18 {
+ regulator-name = "pp1800_vrf18_x";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ vsim1 {
+ regulator-name = "pp1860_vsim1_x";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1860000>;
+ regulator-enable-ramp-delay = <540>;
+ };
+
+ mt6366_vsim2_reg: vsim2 {
+ regulator-name = "pp2760_vsim2_x";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2760000>;
+ regulator-enable-ramp-delay = <540>;
+ };
+
+ mt6366_vsram_gpu_reg: vsram-gpu {
+ regulator-name = "pp0900_dvdd_sram_gpu";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-ramp-delay = <6250>;
+ regulator-enable-ramp-delay = <240>;
+ regulator-coupled-with = <&mt6366_vgpu_reg>;
+ regulator-coupled-max-spread = <10000>;
+ };
+
+ mt6366_vsram_others_reg: vsram-others {
+ regulator-name = "pp0900_dvdd_sram_core";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-ramp-delay = <6250>;
+ regulator-enable-ramp-delay = <240>;
+ regulator-always-on;
+ };
+
+ mt6366_vsram_proc11_reg: vsram-proc11 {
+ regulator-name = "pp0900_dvdd_sram_bc";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1120000>;
+ regulator-ramp-delay = <6250>;
+ regulator-enable-ramp-delay = <240>;
+ regulator-always-on;
+ };
+
+ mt6366_vsram_proc12_reg: vsram-proc12 {
+ regulator-name = "pp0900_dvdd_sram_lc";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1120000>;
+ regulator-ramp-delay = <6250>;
+ regulator-enable-ramp-delay = <240>;
+ regulator-always-on;
+ };
+
+ vusb {
+ regulator-name = "pp3070_vusb";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3070000>;
+ regulator-enable-ramp-delay = <270>;
+ regulator-always-on;
+ };
+
+ vxo22 {
+ regulator-name = "pp2240_vxo22";
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2240000>;
+ regulator-enable-ramp-delay = <120>;
+ /* Feeds DCXO internally */
+ regulator-always-on;
+ };
+ };
+
+ rtc {
+ compatible = "mediatek,mt6366-rtc", "mediatek,mt6358-rtc";
+ };
+ };
+};
+
+&scp {
+ pinctrl-names = "default";
+ pinctrl-0 = <&scp_pins>;
+ firmware-name = "mediatek/mt8186/scp.img";
+ memory-region = <&scp_mem>;
+ status = "okay";
+
+ cros-ec-rpmsg {
+ compatible = "google,cros-ec-rpmsg";
+ mediatek,rpmsg-name = "cros-ec-rpmsg";
+ };
+};
+
+&spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins>;
+ mediatek,pad-select = <0>;
+ status = "okay";
+
+ cros_ec: ec@0 {
+ compatible = "google,cros-ec-spi";
+ reg = <0>;
+ interrupts-extended = <&pio 13 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ec_ap_int>;
+ spi-max-frequency = <1000000>;
+
+ i2c_tunnel: i2c-tunnel {
+ compatible = "google,cros-ec-i2c-tunnel";
+ google,remote-bus = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ typec {
+ compatible = "google,cros-ec-typec";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb_c0: connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+ label = "left";
+ power-role = "dual";
+ data-role = "host";
+ try-power-role = "source";
+ };
+
+ usb_c1: connector@1 {
+ compatible = "usb-c-connector";
+ reg = <1>;
+ label = "right";
+ power-role = "dual";
+ data-role = "host";
+ try-power-role = "source";
+ };
+ };
+ };
+};
+
+&spi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_pins>;
+ cs-gpios = <&pio 45 GPIO_ACTIVE_LOW>;
+ mediatek,pad-select = <0>;
+ status = "okay";
+
+ tpm@0 {
+ compatible = "google,cr50";
+ reg = <0>;
+ interrupts-extended = <&pio 15 IRQ_TYPE_EDGE_RISING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gsc_int>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&ssusb0 {
+ status = "okay";
+};
+
+&ssusb1 {
+ status = "okay";
+};
+
+&u3phy0 {
+ status = "okay";
+};
+
+&u3phy1 {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&usb_host0 {
+ vbus-supply = <&pp3300_s3>;
+ status = "okay";
+};
+
+&usb_host1 {
+ vbus-supply = <&usb_p1_vbus>;
+ status = "okay";
+};
+
+&watchdog {
+ mediatek,reset-by-toprgu;
+};
+
+#include <arm/cros-ec-keyboard.dtsi>
+#include <arm/cros-ec-sbs.dtsi>
--
2.43.0.429.g432eaa2c6b-goog
The MT8186 Steelix, also known as the Lenovo 300e Yoga Chromebook Gen 4,
is a convertible device based on a common design of the same name. The
device comes in different variants. Of them, whether a world facing
camera is integrated is the only differentiating factor between the
two device trees added. The different SKU IDs describe this alone.
The other device difference is the trackpad component used. This is
simply handled by having both possible components described in the
device tree, and letting the implementation figure out which one is
actually available. The system bootloader / firmware does not
differentiate this in that they share the same SKU IDs.
Signed-off-by: Chen-Yu Tsai <[email protected]>
Acked-by: Conor Dooley <[email protected]>
---
Changes since v4:
- Fix pinmux node names
- Split anx7625 reset and power-en pins into separate pinmux nodes
- Change "touchpad" to "trackpad" in commit log
Changes since v3:
none
Changes since v2:
- Picked up Conor's ack
Changes since v1:
- Removed trackpad_pins reference (moved to i2c2 in corsola dtsi)
- Fixed copyright year
- Renamed touchpad to trackpad
---
arch/arm64/boot/dts/mediatek/Makefile | 2 +
.../mt8186-corsola-steelix-sku131072.dts | 18 ++
.../mt8186-corsola-steelix-sku131073.dts | 18 ++
.../dts/mediatek/mt8186-corsola-steelix.dtsi | 199 ++++++++++++++++++
4 files changed, 237 insertions(+)
create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131072.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131073.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 22812b175736..0daa1ad27c22 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -51,6 +51,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku32.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-steelix-sku131072.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-steelix-sku131073.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327681.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327683.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacruel-sku262144.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131072.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131072.dts
new file mode 100644
index 000000000000..eae17bca8585
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131072.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-steelix.dtsi"
+
+/ {
+ model = "Google Steelix board";
+ compatible = "google,steelix-sku131072", "google,steelix",
+ "mediatek,mt8186";
+ chassis-type = "convertible";
+};
+
+&mt6366codec {
+ mediatek,dmic-mode = <0>; /* two-wire */
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131073.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131073.dts
new file mode 100644
index 000000000000..a55375b95d0d
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131073.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-steelix.dtsi"
+
+/ {
+ model = "Google Steelix board";
+ compatible = "google,steelix-sku131073", "google,steelix",
+ "mediatek,mt8186";
+ chassis-type = "convertible";
+};
+
+&mt6366codec {
+ mediatek,dmic-mode = <1>; /* one-wire */
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi
new file mode 100644
index 000000000000..e74e886a00cb
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi
@@ -0,0 +1,199 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/{
+ pp1000_edpbrdg: regulator-pp1000-edpbrdg {
+ compatible = "regulator-fixed";
+ regulator-name = "pp1000_edpbrdg";
+ pinctrl-names = "default";
+ pinctrl-0 = <&en_pp1000_edpbrdg>;
+ enable-active-high;
+ regulator-boot-on;
+ gpio = <&pio 29 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&pp3300_z2>;
+ };
+
+ pp1800_edpbrdg_dx: regulator-pp1800-edpbrdg-dx {
+ compatible = "regulator-fixed";
+ regulator-name = "pp1800_edpbrdg_dx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&en_pp1800_edpbrdg>;
+ enable-active-high;
+ regulator-boot-on;
+ gpio = <&pio 30 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&mt6366_vio18_reg>;
+ };
+
+ pp3300_edp_dx: regulator-pp3300-edp-dx {
+ compatible = "regulator-fixed";
+ regulator-name = "pp3300_edp_dx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&en_pp3300_edpbrdg>;
+ enable-active-high;
+ regulator-boot-on;
+ gpio = <&pio 31 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&pp3300_z2>;
+ };
+};
+
+&dsi_out {
+ remote-endpoint = <&anx7625_in>;
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+
+ anx_bridge: anx7625@58 {
+ compatible = "analogix,anx7625";
+ reg = <0x58>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&anx7625_pins>;
+ enable-gpios = <&pio 96 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>;
+ vdd10-supply = <&pp1000_edpbrdg>;
+ vdd18-supply = <&pp1800_edpbrdg_dx>;
+ vdd33-supply = <&pp3300_edp_dx>;
+ analogix,lane0-swing = /bits/ 8 <0x70 0x30>;
+ analogix,lane1-swing = /bits/ 8 <0x70 0x30>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ anx7625_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ anx7625_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+
+ aux-bus {
+ panel: panel {
+ compatible = "edp-panel";
+ power-supply = <&pp3300_disp_x>;
+ backlight = <&backlight_lcd0>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&anx7625_out>;
+ };
+ };
+ };
+ };
+ };
+};
+
+&i2c1 {
+ touchscreen: touchscreen@5d {
+ compatible = "goodix,gt7375p";
+ reg = <0x5d>;
+ interrupts-extended = <&pio 12 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&touchscreen_pins>;
+ reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>;
+ vdd-supply = <&pp3300_s3>;
+ goodix,no-reset-during-suspend;
+ };
+};
+
+&i2c2 {
+ i2c-scl-internal-delay-ns = <22000>;
+
+ /* second source component */
+ trackpad@2c {
+ compatible = "hid-over-i2c";
+ reg = <0x2c>;
+ hid-descr-addr = <0x20>;
+ interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
+ vdd-supply = <&pp3300_s3>;
+ wakeup-source;
+ };
+};
+
+&keyboard_controller {
+ function-row-physmap = <
+ MATRIX_KEY(0x00, 0x02, 0) /* T1 */
+ MATRIX_KEY(0x03, 0x02, 0) /* T2 */
+ MATRIX_KEY(0x02, 0x02, 0) /* T3 */
+ MATRIX_KEY(0x01, 0x02, 0) /* T4 */
+ MATRIX_KEY(0x03, 0x04, 0) /* T5 */
+ MATRIX_KEY(0x02, 0x04, 0) /* T6 */
+ MATRIX_KEY(0x01, 0x04, 0) /* T7 */
+ MATRIX_KEY(0x02, 0x09, 0) /* T8 */
+ MATRIX_KEY(0x01, 0x09, 0) /* T9 */
+ MATRIX_KEY(0x00, 0x04, 0) /* T10 */
+ >;
+
+ linux,keymap = <
+ MATRIX_KEY(0x00, 0x02, KEY_BACK)
+ MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+ MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+ MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+ MATRIX_KEY(0x03, 0x04, KEY_BRIGHTNESSDOWN)
+ MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSUP)
+ MATRIX_KEY(0x01, 0x04, KEY_MICMUTE)
+ MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+ MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+ MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+ CROS_STD_MAIN_KEYMAP
+ >;
+};
+
+&pio {
+ anx7625_pins: anx7625-pins {
+ pins-int {
+ pinmux = <PINMUX_GPIO9__FUNC_GPIO9>;
+ input-enable;
+ bias-disable;
+ };
+
+ pins-reset {
+ pinmux = <PINMUX_GPIO98__FUNC_GPIO98>;
+ output-low;
+ };
+
+ pins-power-en {
+ pinmux = <PINMUX_GPIO96__FUNC_GPIO96>;
+ output-low;
+ };
+ };
+
+ en_pp1000_edpbrdg: pp1000-edpbrdg-en-pins {
+ pins-vreg-en {
+ pinmux = <PINMUX_GPIO29__FUNC_GPIO29>;
+ output-low;
+ };
+ };
+
+ en_pp1800_edpbrdg: pp1800-edpbrdg-en-pins {
+ pins-vreg-en {
+ pinmux = <PINMUX_GPIO30__FUNC_GPIO30>;
+ output-low;
+ };
+ };
+
+ en_pp3300_edpbrdg: pp3300-edpbrdg-en-pins {
+ pins-vreg-en {
+ pinmux = <PINMUX_GPIO31__FUNC_GPIO31>;
+ output-low;
+ };
+ };
+};
--
2.43.0.429.g432eaa2c6b-goog
MT8186 Rusty, otherwise known as the Lenovo 100e Chromebook Gen 4, is an
MT8186 based laptop. It is based on the "Steelix" design. Being a laptop
instead of a convertible device, there is no touchscreen or stylus.
Signed-off-by: Chen-Yu Tsai <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
---
Changes since v4:
none
Changes since v3:
- Collected reviewed-by from Angelo
Changes since v2:
- Picked up Conor's ack
Changes since v1:
- Reorder SKU numbers in descending order.
- Mark missing components as disabled instead of deleting the node
---
arch/arm64/boot/dts/mediatek/Makefile | 1 +
.../mt8186-corsola-rusty-sku196608.dts | 26 +++++++++++++++++++
2 files changed, 27 insertions(+)
create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-rusty-sku196608.dts
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 0daa1ad27c22..48327471de12 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -51,6 +51,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku32.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-rusty-sku196608.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-steelix-sku131072.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-steelix-sku131073.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327681.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-rusty-sku196608.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-rusty-sku196608.dts
new file mode 100644
index 000000000000..731b0d60228d
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-rusty-sku196608.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-steelix.dtsi"
+
+/ {
+ model = "Google Rusty board";
+ compatible = "google,steelix-sku196609", "google,steelix-sku196608",
+ "google,steelix", "mediatek,mt8186";
+ chassis-type = "laptop";
+};
+
+&gpio_keys {
+ status = "disabled";
+};
+
+&i2c1 {
+ status = "disabled";
+};
+
+&touchscreen {
+ status = "disabled";
+};
--
2.43.0.429.g432eaa2c6b-goog
Add entries for the MT8186 based Chromebooks, also collectively known
as the Lenovo IdeaPad Slim 3 Chromebook (14M868). It is also based on
the "Steelix" design. Being a laptop instead of a convertible device,
there is no stylus, which is similar to Rusty. However Magneton does
not have ports on the right side of the device.
Three variants are listed separately. These use different touchscreen
controllers, or lack a touchscreen altogether.
Signed-off-by: Chen-Yu Tsai <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
---
Changes since v4:
none
Changes since v3:
- Collected reviewed-by from Angelo
Changes since v2:
- Picked up Conor's ack
Changes since v1:
- Reorder SKU numbers in descending order.
- Mark missing components as disabled instead of deleting the node
- Switched to interrupts-extended in touchscreen nodes
- Dropped reset-gpios from touchscreen nodes
- Drop status = "okay", which is the default
---
arch/arm64/boot/dts/mediatek/Makefile | 3 ++
.../mt8186-corsola-magneton-sku393216.dts | 39 +++++++++++++++++++
.../mt8186-corsola-magneton-sku393217.dts | 39 +++++++++++++++++++
.../mt8186-corsola-magneton-sku393218.dts | 26 +++++++++++++
4 files changed, 107 insertions(+)
create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-magneton-sku393216.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-magneton-sku393217.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-magneton-sku393218.dts
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 48327471de12..9896a388e30e 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -51,6 +51,9 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku32.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-magneton-sku393216.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-magneton-sku393217.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-magneton-sku393218.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-rusty-sku196608.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-steelix-sku131072.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-steelix-sku131073.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-magneton-sku393216.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-magneton-sku393216.dts
new file mode 100644
index 000000000000..c9673381ad3b
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-magneton-sku393216.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-steelix.dtsi"
+
+/ {
+ model = "Google Magneton board";
+ compatible = "google,steelix-sku393219", "google,steelix-sku393216",
+ "google,steelix", "mediatek,mt8186";
+ chassis-type = "laptop";
+};
+
+&gpio_keys {
+ status = "disabled";
+};
+
+&i2c1 {
+ touchscreen@10 {
+ compatible = "hid-over-i2c";
+ reg = <0x10>;
+ interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&touchscreen_pins>;
+ vdd-supply = <&pp3300_s3>;
+ post-power-on-delay-ms = <350>;
+ hid-descr-addr = <0x0001>;
+ };
+};
+
+&touchscreen {
+ status = "disabled";
+};
+
+&usb_c1 {
+ status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-magneton-sku393217.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-magneton-sku393217.dts
new file mode 100644
index 000000000000..28e3bbe56421
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-magneton-sku393217.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-steelix.dtsi"
+
+/ {
+ model = "Google Magneton board";
+ compatible = "google,steelix-sku393220", "google,steelix-sku393217",
+ "google,steelix", "mediatek,mt8186";
+ chassis-type = "laptop";
+};
+
+&gpio_keys {
+ status = "disabled";
+};
+
+&i2c1 {
+ touchscreen@40 {
+ compatible = "hid-over-i2c";
+ reg = <0x40>;
+ interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&touchscreen_pins>;
+ vdd-supply = <&pp3300_s3>;
+ post-power-on-delay-ms = <450>;
+ hid-descr-addr = <0x0001>;
+ };
+};
+
+&touchscreen {
+ status = "disabled";
+};
+
+&usb_c1 {
+ status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-magneton-sku393218.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-magneton-sku393218.dts
new file mode 100644
index 000000000000..332894218f07
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-magneton-sku393218.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-steelix.dtsi"
+
+/ {
+ model = "Google Magneton board";
+ compatible = "google,steelix-sku393221", "google,steelix-sku393218",
+ "google,steelix", "mediatek,mt8186";
+ chassis-type = "laptop";
+};
+
+&gpio_keys {
+ status = "disabled";
+};
+
+&touchscreen {
+ status = "disabled";
+};
+
+&usb_c1 {
+ status = "disabled";
+};
--
2.43.0.429.g432eaa2c6b-goog
Il 26/01/24 09:37, Chen-Yu Tsai ha scritto:
> Tentacruel and Tentacool are MT8186 based Chromebooks based on the
> Krabby design.
>
> Tentacruel, also known as the ASUS Chromebook CM14 Flip CM1402F, is a
> convertible device with touchscreen and stylus.
>
> Tentacool, also known as the ASUS Chromebook CM14 CM1402C, is a laptop
> device. It does not have a touchscreen or stylus.
>
> The two devices both have two variants. The difference is a second
> source trackpad controller that shares the same address as the original,
> but is incompatible.
>
> The extra SKU IDs for the Tentacruel devices map to different sensor
> components attached to the Embedded Controller. These are not visible
> to the main processor.
>
> Signed-off-by: Chen-Yu Tsai <[email protected]>
> Acked-by: Conor Dooley <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Il 26/01/24 09:37, Chen-Yu Tsai ha scritto:
> The MT8186 Steelix, also known as the Lenovo 300e Yoga Chromebook Gen 4,
> is a convertible device based on a common design of the same name. The
> device comes in different variants. Of them, whether a world facing
> camera is integrated is the only differentiating factor between the
> two device trees added. The different SKU IDs describe this alone.
>
> The other device difference is the trackpad component used. This is
> simply handled by having both possible components described in the
> device tree, and letting the implementation figure out which one is
> actually available. The system bootloader / firmware does not
> differentiate this in that they share the same SKU IDs.
>
> Signed-off-by: Chen-Yu Tsai <[email protected]>
> Acked-by: Conor Dooley <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
On Fri, 26 Jan 2024 16:37:49 +0800, Chen-Yu Tsai wrote:
> This is v5 of the MT8186 Chromebook device tree series. This series also
> depends on MT7921S Bluetooth [1] and IT6505 audio [2] bindings.
>
> Changes since v4:
> - Rebase and fit in mt8188-evb in board DT binding
> - Change "touchpad" to "trackpad" in descriptions and commit logs
> - Drop #address-cells and #size-cells from it6505 and usb_host1 nodes
> - Drop "ports" nodes from type-c nodes
> - Fix pinmux node names
> - Split anx7625 reset and power-en pins into separate pinmux nodes
>
> [...]
Applied to v6.8-next/dts64, thanks!
[1/9] dt-bindings: arm: mediatek: Sort entries by SoC then board compatibles
commit: ab7e0bfc2ce6d9e81f096e4058e1ea5f9d3c11fe
[2/9] dt-bindings: arm: mediatek: Add MT8186 Tentacruel / Tentacool Chromebooks
commit: 72d721234de52837d84f9a8ffe78e04a61bb9b37
[3/9] dt-bindings: arm: mediatek: Add MT8186 Steelix Chromebook
commit: 0f20d2a2ff103ac9aa757357ddf1cb137f767d3e
[4/9] dt-bindings: arm: mediatek: Add MT8186 Rusty Chromebook
commit: 66135c73d2dc43f7f0fab6e7fdf44fa8e42a9b97
[5/9] dt-bindings: arm: mediatek: Add MT8186 Magneton Chromebooks
commit: a597b13dc92cee39547e894908f787210cbb1a99
[6/9] arm64: dts: mediatek: Add MT8186 Krabby platform based Tentacruel / Tentacool
commit: 660324894cc56e60711a12de51d94398f4e794b6
[7/9] arm64: dts: mediatek: Introduce MT8186 Steelix
commit: 5252fa5b5ecbd65fdab2dfec0c14b96d00ae4b97
[8/9] arm64: dts: mediatek: Add MT8186 Steelix platform based Rusty
commit: 498a5b6f8b67f60e5859bdd3d582274ae3aa2bbb
[9/9] arm64: dts: mediatek: Add MT8186 Magneton Chromebooks
commit: 71e147d069291d0c92e4df903a2895eb5587b559
Best regards,
--
AngeloGioacchino Del Regno <[email protected]>