Add support for mpq8785 device from Monolithic Power Systems, Inc.
(MPS) vendor. This is synchronous step-down controller.
Signed-off-by: Charles Hsu <[email protected]>
---
Change in v1:
Initial patchset.
Change in v2:
1.Add pmbus support status registers.
2.Add mpq8785 in trivial-devices.yaml.
3.Remove format[PSC_VOLTAGE_OUT]
4.Fix MODULE_DESCRIPTION
---
.../devicetree/bindings/trivial-devices.yaml | 2 +
Documentation/hwmon/index.rst | 1 +
Documentation/hwmon/mpq8785.rst | 94 +++++++++++++++++++
drivers/hwmon/pmbus/Kconfig | 9 ++
drivers/hwmon/pmbus/Makefile | 1 +
drivers/hwmon/pmbus/mpq8785.c | 62 ++++++++++++
6 files changed, 169 insertions(+)
create mode 100644 Documentation/hwmon/mpq8785.rst
create mode 100644 drivers/hwmon/pmbus/mpq8785.c
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index 79dcd92c4a43..088b23ed2ae6 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -129,6 +129,8 @@ properties:
- mps,mp2975
# Monolithic Power Systems Inc. multi-phase hot-swap controller mp5990
- mps,mp5990
+ # Monolithic Power Systems Inc. synchronous step-down converter mpq8785
+ - mps,mpq8785
# Honeywell Humidicon HIH-6130 humidity/temperature sensor
- honeywell,hi6130
# IBM Common Form Factor Power Supply Versions (all versions)
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index c7ed1f73ac06..085ad6ca9b05 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -163,6 +163,7 @@ Hardware Monitoring Kernel Drivers
mp2975
mp5023
mp5990
+ mpq8785
nct6683
nct6775
nct7802
diff --git a/Documentation/hwmon/mpq8785.rst b/Documentation/hwmon/mpq8785.rst
new file mode 100644
index 000000000000..bf8176b87086
--- /dev/null
+++ b/Documentation/hwmon/mpq8785.rst
@@ -0,0 +1,94 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+Kernel driver mpq8785
+=======================
+
+Supported chips:
+
+ * MPS MPQ8785
+
+ Prefix: 'mpq8785'
+
+Author: Charles Hsu <[email protected]>
+
+Description
+-----------
+
+The MPQ8785 is a fully integrated, PMBus-compatible, high-frequency, synchronous
+buck converter. The MPQ8785 offers a very compact solution that achieves up to
+40A output current per phase, with excellent load and line regulation over a
+wide input supply range. The MPQ8785 operates at high efficiency over a wide
+output current load range.
+
+The PMBus interface provides converter configurations and key parameters
+monitoring.
+
+The MPQ8785 adopts MPS's proprietary multi-phase digital constant-on-time (MCOT)
+control, which provides fast transient response and eases loop stabilization.
+The MCOT scheme also allows multiple MPQ8785 devices to be connected in parallel
+with excellent current sharing and phase interleaving for high-current
+applications.
+
+Fully integrated protection features include over-current protection (OCP),
+over-voltage protection (OVP), under-voltage protection (UVP), and
+over-temperature protection (OTP).
+
+The MPQ8785 requires a minimal number of readily available, standard external
+components, and is available in a TLGA (5mmx6mm) package.
+
+Device compliant with:
+
+- PMBus rev 1.3 interface.
+
+The driver exports the following attributes via the 'sysfs' files
+for input voltage:
+
+**in1_input**
+
+**in1_label**
+
+**in1_max**
+
+**in1_max_alarm**
+
+**in1_min**
+
+**in1_min_alarm**
+
+**in1_crit**
+
+**in1_crit_alarm**
+
+The driver provides the following attributes for output voltage:
+
+**in2_input**
+
+**in2_label**
+
+**in2_alarm**
+
+The driver provides the following attributes for output current:
+
+**curr1_input**
+
+**curr1_label**
+
+**curr1_max**
+
+**curr1_max_alarm**
+
+**curr1_crit**
+
+**curr1_crit_alarm**
+
+The driver provides the following attributes for temperature:
+
+**temp1_input**
+
+**temp1_max**
+
+**temp1_max_alarm**
+
+**temp1_crit**
+
+**temp1_crit_alarm**
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index 294808f5240a..557ae0c414b0 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -377,6 +377,15 @@ config SENSORS_MPQ7932
This driver can also be built as a module. If so, the module will
be called mpq7932.
+config SENSORS_MPQ8785
+ tristate "MPS MPQ8785"
+ help
+ If you say yes here you get hardware monitoring functionality support
+ for power management IC MPS MPQ8785.
+
+ This driver can also be built as a module. If so, the module will
+ be called mpq8785.
+
config SENSORS_PIM4328
tristate "Flex PIM4328 and compatibles"
help
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
index cf8a76744545..f14ecf03ad77 100644
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -39,6 +39,7 @@ obj-$(CONFIG_SENSORS_MP2975) += mp2975.o
obj-$(CONFIG_SENSORS_MP5023) += mp5023.o
obj-$(CONFIG_SENSORS_MP5990) += mp5990.o
obj-$(CONFIG_SENSORS_MPQ7932) += mpq7932.o
+obj-$(CONFIG_SENSORS_MPQ8785) += mpq8785.o
obj-$(CONFIG_SENSORS_PLI1209BC) += pli1209bc.o
obj-$(CONFIG_SENSORS_PM6764TR) += pm6764tr.o
obj-$(CONFIG_SENSORS_PXE1610) += pxe1610.o
diff --git a/drivers/hwmon/pmbus/mpq8785.c b/drivers/hwmon/pmbus/mpq8785.c
new file mode 100644
index 000000000000..52c73e5f6a3e
--- /dev/null
+++ b/drivers/hwmon/pmbus/mpq8785.c
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for MPS MPQ8785 Step-Down Converter
+ */
+
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include "pmbus.h"
+
+static struct pmbus_driver_info mpq8785_info = {
+ .pages = 1,
+ .format[PSC_VOLTAGE_IN] = direct,
+ .format[PSC_CURRENT_OUT] = direct,
+ .format[PSC_TEMPERATURE] = direct,
+ .m[PSC_VOLTAGE_IN] = 4,
+ .b[PSC_VOLTAGE_IN] = 0,
+ .R[PSC_VOLTAGE_IN] = 1,
+ .m[PSC_CURRENT_OUT] = 16,
+ .b[PSC_CURRENT_OUT] = 0,
+ .R[PSC_CURRENT_OUT] = 0,
+ .m[PSC_TEMPERATURE] = 1,
+ .b[PSC_TEMPERATURE] = 0,
+ .R[PSC_TEMPERATURE] = 0,
+ .func[0] =
+ PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT |
+ PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+ PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+ PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+};
+
+static int mpq8785_probe(struct i2c_client *client)
+{
+ return pmbus_do_probe(client, &mpq8785_info);
+};
+
+static const struct i2c_device_id mpq8785_id[] = {
+ { "mpq8785", 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, mpq8785_id);
+
+static const struct of_device_id __maybe_unused mpq8785_of_match[] = {
+ { .compatible = "mps,mpq8785" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, mpq8785_of_match);
+
+static struct i2c_driver mpq8785_driver = {
+ .driver = {
+ .name = "mpq8785",
+ .of_match_table = of_match_ptr(mpq8785_of_match),
+ },
+ .probe_new = mpq8785_probe,
+ .id_table = mpq8785_id,
+};
+
+module_i2c_driver(mpq8785_driver);
+
+MODULE_AUTHOR("Charles Hsu <[email protected]>");
+MODULE_DESCRIPTION("PMBus driver for MPS MPQ8785");
+MODULE_LICENSE("GPL");
--
2.34.1
On 1/29/24 00:31, Charles Hsu wrote:
> Add support for mpq8785 device from Monolithic Power Systems, Inc.
> (MPS) vendor. This is synchronous step-down controller.
>
> Signed-off-by: Charles Hsu <[email protected]>
>
> ---
> Change in v1:
> Initial patchset.
> Change in v2:
> 1.Add pmbus support status registers.
> 2.Add mpq8785 in trivial-devices.yaml.
> 3.Remove format[PSC_VOLTAGE_OUT]
This is insufficient, sorry. Problem is that pmbus_identify_common()
compares the more reported by PMBUS_VOUT_MODE with the configured mode.
Not setting format[PSC_VOLTAGE_OUT] means that the mode is the default (0),
which is linear mode. If the chip is configured for direct or vid mode
this again will result in probe failure.
I can see two options:
- Add a chip configuration flag such as PMBUS_DETECT_VOUT_MODE (for lack
of a better idea) and use it in pmbus_identify_common() to actually
_set_ the mode from the VOUT_MODE command instead of expecting it
to be already set. This would require providing the coefficients for
output voltage direct mode in mpq8785_info. This would be my preferred
solution (but require a separate patch to add the code to pmbus_core.c).
- Select a fixed mode and write code to convert affected register readings
to that mode if needed. See mp5990.c for an example.
> 4.Fix MODULE_DESCRIPTION
> ---
> .../devicetree/bindings/trivial-devices.yaml | 2 +
> Documentation/hwmon/index.rst | 1 +
> Documentation/hwmon/mpq8785.rst | 94 +++++++++++++++++++
> drivers/hwmon/pmbus/Kconfig | 9 ++
> drivers/hwmon/pmbus/Makefile | 1 +
> drivers/hwmon/pmbus/mpq8785.c | 62 ++++++++++++
> 6 files changed, 169 insertions(+)
> create mode 100644 Documentation/hwmon/mpq8785.rst
> create mode 100644 drivers/hwmon/pmbus/mpq8785.c
>
> diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
> index 79dcd92c4a43..088b23ed2ae6 100644
> --- a/Documentation/devicetree/bindings/trivial-devices.yaml
> +++ b/Documentation/devicetree/bindings/trivial-devices.yaml
> @@ -129,6 +129,8 @@ properties:
> - mps,mp2975
> # Monolithic Power Systems Inc. multi-phase hot-swap controller mp5990
> - mps,mp5990
> + # Monolithic Power Systems Inc. synchronous step-down converter mpq8785
> + - mps,mpq8785
> # Honeywell Humidicon HIH-6130 humidity/temperature sensor
> - honeywell,hi6130
> # IBM Common Form Factor Power Supply Versions (all versions)
Sorry, devicetree changes require a separate patch.
Thanks,
Guenter
On 1/29/24 00:31, Charles Hsu wrote:
> Add support for mpq8785 device from Monolithic Power Systems, Inc.
> (MPS) vendor. This is synchronous step-down controller.
>
> Signed-off-by: Charles Hsu <[email protected]>
I hope you are somehow getting this.
I got:
Address not found
Your message wasn't delivered to [email protected] because the address couldn't be found, or is unable to receive mail.
and:
550 5.1.1 The email account that you tried to reach does not exist.
Please try double-checking the recipient's email address for typos or unnecessary spaces.
For more information, go to https://support.google.com/mail/?p=NoSuchUser eo9-20020a056830720900b006e11433d3c1sor1010792otb.11 - gsmtp
Maybe your address got banned from gmail for sending patches to too many
recipients (that happened to me before, so it would not be surprising).
Unfortunately, I can only accept patches from valid e-mail addresses,
so I hope you can get this resolved.
Thanks,
Guenter
On Mon, Jan 29, 2024 at 04:31:15PM +0800, Charles Hsu wrote:
> Add support for mpq8785 device from Monolithic Power Systems, Inc.
> (MPS) vendor. This is synchronous step-down controller.
>
> Signed-off-by: Charles Hsu <[email protected]>
>
> ---
> Change in v1:
> Initial patchset.
> Change in v2:
> 1.Add pmbus support status registers.
> 2.Add mpq8785 in trivial-devices.yaml.
> 3.Remove format[PSC_VOLTAGE_OUT]
> 4.Fix MODULE_DESCRIPTION
> ---
> .../devicetree/bindings/trivial-devices.yaml | 2 +
Bindings are a separate patch. checkpatch.pl will tell you this.
> Documentation/hwmon/index.rst | 1 +
> Documentation/hwmon/mpq8785.rst | 94 +++++++++++++++++++
> drivers/hwmon/pmbus/Kconfig | 9 ++
> drivers/hwmon/pmbus/Makefile | 1 +
> drivers/hwmon/pmbus/mpq8785.c | 62 ++++++++++++
> 6 files changed, 169 insertions(+)
> create mode 100644 Documentation/hwmon/mpq8785.rst
> create mode 100644 drivers/hwmon/pmbus/mpq8785.c