This patch series aims to add support for XLCDC IP of sam9x7 SoC family
to the DRM subsystem.XLCDC IP has additional registers and new
configuration bits compared to the existing register set of HLCDC IP.
The new compatible string "microchip,sam9x75-xlcdc" is defined for sam9x75
variant of the sam9x7 SoC family.The is_xlcdc flag under driver data and
IP specific driver ops helps to differentiate the XLCDC and existing HLCDC
code within the same driver.
changes in v7:
* LCDC IP driver ops functions are declared static and its
declaration are removed.
changes in v6:
* Fixed Cosmetic defects.
* Added comments for readability.
changes in v5:
* return value of regmap_read_poll_timeout is checked in failure
case.
* HLCDC and XLCDC specific driver functions are now invoked
using its IP specific driver ops w/o the need of checking is_xlcdc flag.
* Removed empty spaces and blank lines.
changes in v4:
* fixed kernel warnings reported by kernel test robot.
changes in v3:
* Removed de-referencing the value of is_xlcdc flag multiple times in
a single function.
* Removed cpu_relax() call when using regmap_read_poll_timeout.
* Updated xfactor and yfactor equations using shift operators
* Defined CSC co-efficients in an array for code readability.
changes in v2:
* Change the driver compatible name from "microchip,sam9x7-xlcdc" to
"microchip,sam9x75-xlcdc".
* Move is_xlcdc flag to driver data.
* Remove unsed Macro definitions.
* Add co-developed-bys tags
* Replace regmap_read() with regmap_read_poll_timeout() call
* Split code into two helpers for code readablitity.
Durai Manickam KR (1):
drm: atmel-hlcdc: Define SAM9X7 SoC XLCDC specific registers
Manikandan Muralidharan (6):
drm: atmel-hlcdc: add flag and driver ops to differentiate XLCDC and
HLCDC IP
drm: atmel-hlcdc: add LCD controller layer definition for sam9x75
drm: atmel_hlcdc: Add support for XLCDC in atmel LCD driver
drm: atmel-hlcdc: add DPI mode support for XLCDC
drm: atmel-hlcdc: add vertical and horizontal scaling support for
XLCDC
drm: atmel-hlcdc: add support for DSI output formats
.../gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c | 175 +++++++--
drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c | 105 +++++
drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h | 86 ++++
.../gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c | 369 +++++++++++++++---
include/linux/mfd/atmel-hlcdc.h | 10 +
5 files changed, 647 insertions(+), 98 deletions(-)
--
2.25.1
Add support for the following DPI mode if the encoder type
is DSI as per the XLCDC IP datasheet:
- 16BPPCFG1
- 16BPPCFG2
- 16BPPCFG3
- 18BPPCFG1
- 18BPPCFG2
- 24BPP
Signed-off-by: Manikandan Muralidharan <[email protected]>
[[email protected]: update output format using is_xlcdc flag]
Signed-off-by: Durai Manickam KR <[email protected]>
---
.../gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c | 123 +++++++++++++-----
1 file changed, 88 insertions(+), 35 deletions(-)
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
index 1899be2eb6a3..6f529769b036 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
@@ -295,11 +295,18 @@ static void atmel_hlcdc_crtc_atomic_enable(struct drm_crtc *c,
}
-#define ATMEL_HLCDC_RGB444_OUTPUT BIT(0)
-#define ATMEL_HLCDC_RGB565_OUTPUT BIT(1)
-#define ATMEL_HLCDC_RGB666_OUTPUT BIT(2)
-#define ATMEL_HLCDC_RGB888_OUTPUT BIT(3)
-#define ATMEL_HLCDC_OUTPUT_MODE_MASK GENMASK(3, 0)
+#define ATMEL_HLCDC_RGB444_OUTPUT BIT(0)
+#define ATMEL_HLCDC_RGB565_OUTPUT BIT(1)
+#define ATMEL_HLCDC_RGB666_OUTPUT BIT(2)
+#define ATMEL_HLCDC_RGB888_OUTPUT BIT(3)
+#define ATMEL_HLCDC_DPI_RGB565C1_OUTPUT BIT(4)
+#define ATMEL_HLCDC_DPI_RGB565C2_OUTPUT BIT(5)
+#define ATMEL_HLCDC_DPI_RGB565C3_OUTPUT BIT(6)
+#define ATMEL_HLCDC_DPI_RGB666C1_OUTPUT BIT(7)
+#define ATMEL_HLCDC_DPI_RGB666C2_OUTPUT BIT(8)
+#define ATMEL_HLCDC_DPI_RGB888_OUTPUT BIT(9)
+#define ATMEL_HLCDC_OUTPUT_MODE_MASK GENMASK(3, 0)
+#define ATMEL_XLCDC_OUTPUT_MODE_MASK GENMASK(9, 0)
static int atmel_hlcdc_connector_output_mode(struct drm_connector_state *state)
{
@@ -313,53 +320,99 @@ static int atmel_hlcdc_connector_output_mode(struct drm_connector_state *state)
if (!encoder)
encoder = connector->encoder;
- switch (atmel_hlcdc_encoder_get_bus_fmt(encoder)) {
- case 0:
- break;
- case MEDIA_BUS_FMT_RGB444_1X12:
- return ATMEL_HLCDC_RGB444_OUTPUT;
- case MEDIA_BUS_FMT_RGB565_1X16:
- return ATMEL_HLCDC_RGB565_OUTPUT;
- case MEDIA_BUS_FMT_RGB666_1X18:
- return ATMEL_HLCDC_RGB666_OUTPUT;
- case MEDIA_BUS_FMT_RGB888_1X24:
- return ATMEL_HLCDC_RGB888_OUTPUT;
- default:
- return -EINVAL;
- }
-
- for (j = 0; j < info->num_bus_formats; j++) {
- switch (info->bus_formats[j]) {
- case MEDIA_BUS_FMT_RGB444_1X12:
- supported_fmts |= ATMEL_HLCDC_RGB444_OUTPUT;
+ if (encoder->encoder_type == DRM_MODE_ENCODER_DSI) {
+ /*
+ * atmel-hlcdc to support DSI formats with DSI video pipeline
+ * when DRM_MODE_ENCODER_DSI type is set by
+ * connector driver component.
+ */
+ switch (atmel_hlcdc_encoder_get_bus_fmt(encoder)) {
+ case 0:
break;
case MEDIA_BUS_FMT_RGB565_1X16:
- supported_fmts |= ATMEL_HLCDC_RGB565_OUTPUT;
- break;
+ return ATMEL_HLCDC_DPI_RGB565C1_OUTPUT;
case MEDIA_BUS_FMT_RGB666_1X18:
- supported_fmts |= ATMEL_HLCDC_RGB666_OUTPUT;
- break;
+ return ATMEL_HLCDC_DPI_RGB666C1_OUTPUT;
+ case MEDIA_BUS_FMT_RGB666_1X24_CPADHI:
+ return ATMEL_HLCDC_DPI_RGB666C2_OUTPUT;
case MEDIA_BUS_FMT_RGB888_1X24:
- supported_fmts |= ATMEL_HLCDC_RGB888_OUTPUT;
- break;
+ return ATMEL_HLCDC_DPI_RGB888_OUTPUT;
default:
+ return -EINVAL;
+ }
+
+ for (j = 0; j < info->num_bus_formats; j++) {
+ switch (info->bus_formats[j]) {
+ case MEDIA_BUS_FMT_RGB565_1X16:
+ supported_fmts |=
+ ATMEL_HLCDC_DPI_RGB565C1_OUTPUT;
+ break;
+ case MEDIA_BUS_FMT_RGB666_1X18:
+ supported_fmts |=
+ ATMEL_HLCDC_DPI_RGB666C1_OUTPUT;
+ break;
+ case MEDIA_BUS_FMT_RGB666_1X24_CPADHI:
+ supported_fmts |=
+ ATMEL_HLCDC_DPI_RGB666C2_OUTPUT;
+ break;
+ case MEDIA_BUS_FMT_RGB888_1X24:
+ supported_fmts |=
+ ATMEL_HLCDC_DPI_RGB888_OUTPUT;
+ break;
+ default:
+ break;
+ }
+ }
+ } else {
+ switch (atmel_hlcdc_encoder_get_bus_fmt(encoder)) {
+ case 0:
break;
+ case MEDIA_BUS_FMT_RGB444_1X12:
+ return ATMEL_HLCDC_RGB444_OUTPUT;
+ case MEDIA_BUS_FMT_RGB565_1X16:
+ return ATMEL_HLCDC_RGB565_OUTPUT;
+ case MEDIA_BUS_FMT_RGB666_1X18:
+ return ATMEL_HLCDC_RGB666_OUTPUT;
+ case MEDIA_BUS_FMT_RGB888_1X24:
+ return ATMEL_HLCDC_RGB888_OUTPUT;
+ default:
+ return -EINVAL;
}
- }
+ for (j = 0; j < info->num_bus_formats; j++) {
+ switch (info->bus_formats[j]) {
+ case MEDIA_BUS_FMT_RGB444_1X12:
+ supported_fmts |= ATMEL_HLCDC_RGB444_OUTPUT;
+ break;
+ case MEDIA_BUS_FMT_RGB565_1X16:
+ supported_fmts |= ATMEL_HLCDC_RGB565_OUTPUT;
+ break;
+ case MEDIA_BUS_FMT_RGB666_1X18:
+ supported_fmts |= ATMEL_HLCDC_RGB666_OUTPUT;
+ break;
+ case MEDIA_BUS_FMT_RGB888_1X24:
+ supported_fmts |= ATMEL_HLCDC_RGB888_OUTPUT;
+ break;
+ default:
+ break;
+ }
+ }
+ }
return supported_fmts;
}
static int atmel_hlcdc_crtc_select_output_mode(struct drm_crtc_state *state)
{
- unsigned int output_fmts = ATMEL_HLCDC_OUTPUT_MODE_MASK;
+ unsigned int output_fmts;
struct atmel_hlcdc_crtc_state *hstate;
struct drm_connector_state *cstate;
struct drm_connector *connector;
- struct atmel_hlcdc_crtc *crtc;
+ struct atmel_hlcdc_crtc *crtc = drm_crtc_to_atmel_hlcdc_crtc(state->crtc);
int i;
+ bool is_xlcdc = crtc->dc->desc->is_xlcdc;
- crtc = drm_crtc_to_atmel_hlcdc_crtc(state->crtc);
+ output_fmts = is_xlcdc ? ATMEL_XLCDC_OUTPUT_MODE_MASK :
+ ATMEL_HLCDC_OUTPUT_MODE_MASK;
for_each_new_connector_in_state(state->state, connector, cstate, i) {
unsigned int supported_fmts = 0;
@@ -380,7 +433,7 @@ static int atmel_hlcdc_crtc_select_output_mode(struct drm_crtc_state *state)
hstate = drm_crtc_state_to_atmel_hlcdc_crtc_state(state);
hstate->output_mode = fls(output_fmts) - 1;
- if (crtc->dc->desc->is_xlcdc) {
+ if (is_xlcdc) {
/* check if MIPI DPI bit needs to be set */
if (fls(output_fmts) > 3) {
hstate->output_mode -= 4;
--
2.25.1
Update the LCDC_HEOCFG30 and LCDC_HEOCFG31 registers of XLCDC IP which
supports vertical and horizontal scaling with Bilinear and Bicubic
co-efficients taps for Chroma and Luma componenets of the Pixel.
Signed-off-by: Manikandan Muralidharan <[email protected]>
---
drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c | 2 ++
drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h | 4 ++++
.../gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c | 20 +++++++++++++++++++
3 files changed, 26 insertions(+)
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
index 18a3a95f94be..debd4bf3e1b0 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
@@ -541,6 +541,8 @@ static const struct atmel_hlcdc_layer_desc atmel_xlcdc_sam9x75_layers[] = {
.general_config = 12,
.csc = 16,
.scaler_config = 23,
+ .vxs_config = 30,
+ .hxs_config = 31,
},
.clut_offset = 0x1300,
},
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h
index 1ef15f2d536c..216beaf1da0e 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h
@@ -198,6 +198,8 @@
* @disc_pos: discard area position register
* @disc_size: discard area size register
* @csc: color space conversion register
+ * @vxs_config: vertical scalar filter taps control register
+ * @hxs_config: horizontal scalar filter taps control register
*/
struct atmel_hlcdc_layer_cfg_layout {
int xstride[ATMEL_HLCDC_LAYER_MAX_PLANES];
@@ -217,6 +219,8 @@ struct atmel_hlcdc_layer_cfg_layout {
int disc_pos;
int disc_size;
int csc;
+ int vxs_config;
+ int hxs_config;
};
struct atmel_hlcdc_plane_state;
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
index 59ddd743ce92..a527badf865d 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
@@ -966,6 +966,26 @@ static void xlcdc_csc_init(struct atmel_hlcdc_plane *plane,
desc->layout.csc + i,
xlcdc_csc_coeffs[i]);
}
+
+ if (desc->layout.vxs_config && desc->layout.hxs_config) {
+ /*
+ * Updating vxs.config and hxs.config fixes the
+ * Green Color Issue in SAM9X7 EGT Video Player App
+ */
+ atmel_hlcdc_layer_write_cfg(&plane->layer,
+ desc->layout.vxs_config,
+ ATMEL_XLCDC_LAYER_VXSYCFG_ONE |
+ ATMEL_XLCDC_LAYER_VXSYTAP2_ENABLE |
+ ATMEL_XLCDC_LAYER_VXSCCFG_ONE |
+ ATMEL_XLCDC_LAYER_VXSCTAP2_ENABLE);
+
+ atmel_hlcdc_layer_write_cfg(&plane->layer,
+ desc->layout.hxs_config,
+ ATMEL_XLCDC_LAYER_HXSYCFG_ONE |
+ ATMEL_XLCDC_LAYER_HXSYTAP2_ENABLE |
+ ATMEL_XLCDC_LAYER_HXSCCFG_ONE |
+ ATMEL_XLCDC_LAYER_HXSCTAP2_ENABLE);
+ }
}
static int atmel_hlcdc_plane_init_properties(struct atmel_hlcdc_plane *plane)
--
2.25.1
XLCDC in SAM9X7 has different sets of registers and additional
configuration bits when compared to previous HLCDC IP. Read/write
operation on the controller registers is now separated using the
XLCDC status flag and with HLCDC and XLCDC IP specific ops.
HEO scaling, window resampling, Alpha blending, YUV-to-RGB
conversion in XLCDC is derived and handled using additional
configuration bits and registers. Writing one to the Enable fields
of each layer in LCD_ATTRE is required to reflect the values set
in Configuration, FBA, Enable registers of each layer.
Signed-off-by: Manikandan Muralidharan <[email protected]>
Co-developed-by: Hari Prasath Gujulan Elango <[email protected]>
Signed-off-by: Hari Prasath Gujulan Elango <[email protected]>
Co-developed-by: Durai Manickam KR <[email protected]>
Signed-off-by: Durai Manickam KR <[email protected]>
---
.../gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c | 33 +-
drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c | 6 +
drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h | 3 +
.../gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c | 349 +++++++++++++++---
4 files changed, 329 insertions(+), 62 deletions(-)
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
index cc5cf4c2faf7..1ac31c0c474a 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
@@ -79,6 +79,7 @@ static void atmel_hlcdc_crtc_mode_set_nofb(struct drm_crtc *c)
unsigned int mask = ATMEL_HLCDC_CLKDIV_MASK | ATMEL_HLCDC_CLKPOL;
unsigned int cfg = 0;
int div, ret;
+ bool is_xlcdc = crtc->dc->desc->is_xlcdc;
/* get encoder from crtc */
drm_for_each_encoder(en_iter, ddev) {
@@ -164,10 +165,10 @@ static void atmel_hlcdc_crtc_mode_set_nofb(struct drm_crtc *c)
state = drm_crtc_state_to_atmel_hlcdc_crtc_state(c->state);
cfg = state->output_mode << 8;
- if (adj->flags & DRM_MODE_FLAG_NVSYNC)
+ if (!is_xlcdc && (adj->flags & DRM_MODE_FLAG_NVSYNC))
cfg |= ATMEL_HLCDC_VSPOL;
- if (adj->flags & DRM_MODE_FLAG_NHSYNC)
+ if (!is_xlcdc && (adj->flags & DRM_MODE_FLAG_NHSYNC))
cfg |= ATMEL_HLCDC_HSPOL;
regmap_update_bits(regmap, ATMEL_HLCDC_CFG(5),
@@ -202,6 +203,20 @@ static void atmel_hlcdc_crtc_atomic_disable(struct drm_crtc *c,
pm_runtime_get_sync(dev->dev);
+ if (crtc->dc->desc->is_xlcdc) {
+ regmap_write(regmap, ATMEL_HLCDC_DIS, ATMEL_XLCDC_CM);
+ if (regmap_read_poll_timeout(regmap, ATMEL_HLCDC_SR, status,
+ !(status & ATMEL_XLCDC_CM),
+ 10, 1000))
+ dev_warn(dev->dev, "Atmel LCDC status register CMSTS timeout\n");
+
+ regmap_write(regmap, ATMEL_HLCDC_DIS, ATMEL_XLCDC_SD);
+ if (regmap_read_poll_timeout(regmap, ATMEL_HLCDC_SR, status,
+ status & ATMEL_XLCDC_SD,
+ 10, 1000))
+ dev_warn(dev->dev, "Atmel LCDC status register SDSTS timeout\n");
+ }
+
regmap_write(regmap, ATMEL_HLCDC_DIS, ATMEL_HLCDC_DISP);
while (!regmap_read(regmap, ATMEL_HLCDC_SR, &status) &&
(status & ATMEL_HLCDC_DISP))
@@ -256,6 +271,20 @@ static void atmel_hlcdc_crtc_atomic_enable(struct drm_crtc *c,
!(status & ATMEL_HLCDC_DISP))
cpu_relax();
+ if (crtc->dc->desc->is_xlcdc) {
+ regmap_write(regmap, ATMEL_HLCDC_EN, ATMEL_XLCDC_CM);
+ if (regmap_read_poll_timeout(regmap, ATMEL_HLCDC_SR, status,
+ status & ATMEL_XLCDC_CM,
+ 10, 1000))
+ dev_warn(dev->dev, "Atmel LCDC status register CMSTS timeout\n");
+
+ regmap_write(regmap, ATMEL_HLCDC_EN, ATMEL_XLCDC_SD);
+ if (regmap_read_poll_timeout(regmap, ATMEL_HLCDC_SR, status,
+ !(status & ATMEL_XLCDC_SD),
+ 10, 1000))
+ dev_warn(dev->dev, "Atmel LCDC status register SDSTS timeout\n");
+ }
+
pm_runtime_put_sync(dev->dev);
}
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
index d30aec174aa2..18a3a95f94be 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
@@ -58,6 +58,7 @@ static const struct atmel_hlcdc_dc_desc atmel_hlcdc_dc_at91sam9n12 = {
.conflicting_output_formats = true,
.nlayers = ARRAY_SIZE(atmel_hlcdc_at91sam9n12_layers),
.layers = atmel_hlcdc_at91sam9n12_layers,
+ .ops = &atmel_hlcdc_ops,
};
static const struct atmel_hlcdc_layer_desc atmel_hlcdc_at91sam9x5_layers[] = {
@@ -151,6 +152,7 @@ static const struct atmel_hlcdc_dc_desc atmel_hlcdc_dc_at91sam9x5 = {
.conflicting_output_formats = true,
.nlayers = ARRAY_SIZE(atmel_hlcdc_at91sam9x5_layers),
.layers = atmel_hlcdc_at91sam9x5_layers,
+ .ops = &atmel_hlcdc_ops,
};
static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sama5d3_layers[] = {
@@ -269,6 +271,7 @@ static const struct atmel_hlcdc_dc_desc atmel_hlcdc_dc_sama5d3 = {
.conflicting_output_formats = true,
.nlayers = ARRAY_SIZE(atmel_hlcdc_sama5d3_layers),
.layers = atmel_hlcdc_sama5d3_layers,
+ .ops = &atmel_hlcdc_ops,
};
static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sama5d4_layers[] = {
@@ -364,6 +367,7 @@ static const struct atmel_hlcdc_dc_desc atmel_hlcdc_dc_sama5d4 = {
.max_hpw = 0x3ff,
.nlayers = ARRAY_SIZE(atmel_hlcdc_sama5d4_layers),
.layers = atmel_hlcdc_sama5d4_layers,
+ .ops = &atmel_hlcdc_ops,
};
static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sam9x60_layers[] = {
@@ -460,6 +464,7 @@ static const struct atmel_hlcdc_dc_desc atmel_hlcdc_dc_sam9x60 = {
.fixed_clksrc = true,
.nlayers = ARRAY_SIZE(atmel_hlcdc_sam9x60_layers),
.layers = atmel_hlcdc_sam9x60_layers,
+ .ops = &atmel_hlcdc_ops,
};
static const struct atmel_hlcdc_layer_desc atmel_xlcdc_sam9x75_layers[] = {
@@ -553,6 +558,7 @@ static const struct atmel_hlcdc_dc_desc atmel_xlcdc_dc_sam9x75 = {
.is_xlcdc = true,
.nlayers = ARRAY_SIZE(atmel_xlcdc_sam9x75_layers),
.layers = atmel_xlcdc_sam9x75_layers,
+ .ops = &atmel_xlcdc_ops,
};
static const struct of_device_id atmel_hlcdc_of_match[] = {
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h
index e6b4b0bb11b9..1ef15f2d536c 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h
@@ -424,6 +424,9 @@ struct atmel_hlcdc_dc {
} suspend;
};
+extern const struct atmel_lcdc_dc_ops atmel_hlcdc_ops;
+extern const struct atmel_lcdc_dc_ops atmel_xlcdc_ops;
+
extern struct atmel_hlcdc_formats atmel_hlcdc_plane_rgb_formats;
extern struct atmel_hlcdc_formats atmel_hlcdc_plane_rgb_and_yuv_formats;
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
index daa508504f47..59ddd743ce92 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
@@ -282,8 +282,9 @@ atmel_hlcdc_plane_scaler_set_phicoeff(struct atmel_hlcdc_plane *plane,
coeff_tab[i]);
}
-static void atmel_hlcdc_plane_setup_scaler(struct atmel_hlcdc_plane *plane,
- struct atmel_hlcdc_plane_state *state)
+static
+void atmel_hlcdc_plane_setup_scaler(struct atmel_hlcdc_plane *plane,
+ struct atmel_hlcdc_plane_state *state)
{
const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
u32 xfactor, yfactor;
@@ -330,11 +331,61 @@ static void atmel_hlcdc_plane_setup_scaler(struct atmel_hlcdc_plane *plane,
yfactor));
}
+static
+void atmel_xlcdc_plane_setup_scaler(struct atmel_hlcdc_plane *plane,
+ struct atmel_hlcdc_plane_state *state)
+{
+ const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
+ u32 xfactor, yfactor;
+
+ if (!desc->layout.scaler_config)
+ return;
+
+ if (state->crtc_w == state->src_w && state->crtc_h == state->src_h) {
+ atmel_hlcdc_layer_write_cfg(&plane->layer,
+ desc->layout.scaler_config, 0);
+ return;
+ }
+
+ /* xfactor = round[(2^20 * XMEMSIZE)/XSIZE)] */
+ xfactor = (u32)(((1 << 20) * state->src_w) / state->crtc_w);
+
+ /* yfactor = round[(2^20 * YMEMSIZE)/YSIZE)] */
+ yfactor = (u32)(((1 << 20) * state->src_h) / state->crtc_h);
+
+ atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config,
+ ATMEL_XLCDC_LAYER_VSCALER_LUMA_ENABLE |
+ ATMEL_XLCDC_LAYER_VSCALER_CHROMA_ENABLE |
+ ATMEL_XLCDC_LAYER_HSCALER_LUMA_ENABLE |
+ ATMEL_XLCDC_LAYER_HSCALER_CHROMA_ENABLE);
+
+ atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 1,
+ yfactor);
+ atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 3,
+ xfactor);
+
+ /*
+ * With YCbCr 4:2:2 and YCbYcr 4:2:0 window resampling, configuration
+ * register LCDC_HEOCFG25.VXSCFACT and LCDC_HEOCFG27.HXSCFACT is half
+ * the value of yfactor and xfactor.
+ */
+ if (state->base.fb->format->format == DRM_FORMAT_YUV420) {
+ yfactor /= 2;
+ xfactor /= 2;
+ }
+
+ atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 2,
+ yfactor);
+ atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 4,
+ xfactor);
+}
+
static void
atmel_hlcdc_plane_update_pos_and_size(struct atmel_hlcdc_plane *plane,
struct atmel_hlcdc_plane_state *state)
{
const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
+ struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private;
if (desc->layout.size)
atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.size,
@@ -352,12 +403,12 @@ atmel_hlcdc_plane_update_pos_and_size(struct atmel_hlcdc_plane *plane,
ATMEL_HLCDC_LAYER_POS(state->crtc_x,
state->crtc_y));
- atmel_hlcdc_plane_setup_scaler(plane, state);
+ dc->desc->ops->plane_setup_scaler(plane, state);
}
-static void
-atmel_hlcdc_plane_update_general_settings(struct atmel_hlcdc_plane *plane,
- struct atmel_hlcdc_plane_state *state)
+static
+void atmel_hlcdc_plane_update_general_settings(struct atmel_hlcdc_plane *plane,
+ struct atmel_hlcdc_plane_state *state)
{
unsigned int cfg = ATMEL_HLCDC_LAYER_DMA_BLEN_INCR16 | state->ahb_id;
const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
@@ -393,6 +444,40 @@ atmel_hlcdc_plane_update_general_settings(struct atmel_hlcdc_plane *plane,
cfg);
}
+static
+void atmel_xlcdc_plane_update_general_settings(struct atmel_hlcdc_plane *plane,
+ struct atmel_hlcdc_plane_state *state)
+{
+ const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
+ const struct drm_format_info *format = state->base.fb->format;
+ unsigned int cfg;
+
+ atmel_hlcdc_layer_write_cfg(&plane->layer, ATMEL_XLCDC_LAYER_DMA_CFG,
+ ATMEL_HLCDC_LAYER_DMA_BLEN_INCR16 | state->ahb_id);
+
+ cfg = ATMEL_XLCDC_LAYER_DMA | ATMEL_XLCDC_LAYER_REP;
+
+ if (plane->base.type != DRM_PLANE_TYPE_PRIMARY) {
+ /*
+ * Alpha Blending bits specific to SAM9X7 SoC
+ */
+ cfg |= ATMEL_XLCDC_LAYER_SFACTC_A0_MULT_AS |
+ ATMEL_XLCDC_LAYER_SFACTA_ONE |
+ ATMEL_XLCDC_LAYER_DFACTC_M_A0_MULT_AS |
+ ATMEL_XLCDC_LAYER_DFACTA_ONE;
+ if (format->has_alpha)
+ cfg |= ATMEL_XLCDC_LAYER_A0(0xff);
+ else
+ cfg |= ATMEL_XLCDC_LAYER_A0(state->base.alpha);
+ }
+
+ if (state->disc_h && state->disc_w)
+ cfg |= ATMEL_XLCDC_LAYER_DISCEN;
+
+ atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.general_config,
+ cfg);
+}
+
static void atmel_hlcdc_plane_update_format(struct atmel_hlcdc_plane *plane,
struct atmel_hlcdc_plane_state *state)
{
@@ -437,36 +522,55 @@ static void atmel_hlcdc_plane_update_clut(struct atmel_hlcdc_plane *plane,
}
}
+static void update_hlcdc_buffers(struct atmel_hlcdc_plane *plane,
+ struct atmel_hlcdc_plane_state *state,
+ u32 sr, int i)
+{
+ atmel_hlcdc_layer_write_reg(&plane->layer,
+ ATMEL_HLCDC_LAYER_PLANE_HEAD(i),
+ state->dscrs[i]->self);
+
+ if (sr & ATMEL_HLCDC_LAYER_EN)
+ return;
+
+ atmel_hlcdc_layer_write_reg(&plane->layer,
+ ATMEL_HLCDC_LAYER_PLANE_ADDR(i),
+ state->dscrs[i]->addr);
+ atmel_hlcdc_layer_write_reg(&plane->layer,
+ ATMEL_HLCDC_LAYER_PLANE_CTRL(i),
+ state->dscrs[i]->ctrl);
+ atmel_hlcdc_layer_write_reg(&plane->layer,
+ ATMEL_HLCDC_LAYER_PLANE_NEXT(i),
+ state->dscrs[i]->self);
+}
+
+static void update_xlcdc_buffers(struct atmel_hlcdc_plane *plane,
+ struct atmel_hlcdc_plane_state *state,
+ u32 sr, int i)
+{
+ atmel_hlcdc_layer_write_reg(&plane->layer,
+ ATMEL_XLCDC_LAYER_PLANE_ADDR(i),
+ state->dscrs[i]->addr);
+}
+
static void atmel_hlcdc_plane_update_buffers(struct atmel_hlcdc_plane *plane,
- struct atmel_hlcdc_plane_state *state)
+ struct atmel_hlcdc_plane_state *state)
{
const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
+ struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private;
struct drm_framebuffer *fb = state->base.fb;
u32 sr;
int i;
- sr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHSR);
+ if (!dc->desc->is_xlcdc)
+ sr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHSR);
for (i = 0; i < state->nplanes; i++) {
struct drm_gem_dma_object *gem = drm_fb_dma_get_gem_obj(fb, i);
state->dscrs[i]->addr = gem->dma_addr + state->offsets[i];
- atmel_hlcdc_layer_write_reg(&plane->layer,
- ATMEL_HLCDC_LAYER_PLANE_HEAD(i),
- state->dscrs[i]->self);
-
- if (!(sr & ATMEL_HLCDC_LAYER_EN)) {
- atmel_hlcdc_layer_write_reg(&plane->layer,
- ATMEL_HLCDC_LAYER_PLANE_ADDR(i),
- state->dscrs[i]->addr);
- atmel_hlcdc_layer_write_reg(&plane->layer,
- ATMEL_HLCDC_LAYER_PLANE_CTRL(i),
- state->dscrs[i]->ctrl);
- atmel_hlcdc_layer_write_reg(&plane->layer,
- ATMEL_HLCDC_LAYER_PLANE_NEXT(i),
- state->dscrs[i]->self);
- }
+ dc->desc->ops->update_lcdc_buffers(plane, state, sr, i);
if (desc->layout.xstride[i])
atmel_hlcdc_layer_write_cfg(&plane->layer,
@@ -712,11 +816,8 @@ static int atmel_hlcdc_plane_atomic_check(struct drm_plane *p,
return 0;
}
-static void atmel_hlcdc_plane_atomic_disable(struct drm_plane *p,
- struct drm_atomic_state *state)
+static void hlcdc_atomic_disable(struct atmel_hlcdc_plane *plane)
{
- struct atmel_hlcdc_plane *plane = drm_plane_to_atmel_hlcdc_plane(p);
-
/* Disable interrupts */
atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_IDR,
0xffffffff);
@@ -731,6 +832,70 @@ static void atmel_hlcdc_plane_atomic_disable(struct drm_plane *p,
atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_ISR);
}
+static void xlcdc_atomic_disable(struct atmel_hlcdc_plane *plane)
+{
+ /* Disable interrupts */
+ atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_XLCDC_LAYER_IDR,
+ 0xffffffff);
+
+ /* Disable the layer */
+ atmel_hlcdc_layer_write_reg(&plane->layer,
+ ATMEL_XLCDC_LAYER_ENR, 0);
+
+ /* Clear all pending interrupts */
+ atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_XLCDC_LAYER_ISR);
+}
+
+static void atmel_hlcdc_plane_atomic_disable(struct drm_plane *p,
+ struct drm_atomic_state *state)
+{
+ struct atmel_hlcdc_plane *plane = drm_plane_to_atmel_hlcdc_plane(p);
+ struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private;
+
+ dc->desc->ops->lcdc_atomic_disable(plane);
+}
+
+static void hlcdc_atomic_update(struct atmel_hlcdc_plane *plane,
+ struct atmel_hlcdc_dc *dc)
+{
+ u32 sr;
+
+ /* Enable the overrun interrupts. */
+ atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_IER,
+ ATMEL_HLCDC_LAYER_OVR_IRQ(0) |
+ ATMEL_HLCDC_LAYER_OVR_IRQ(1) |
+ ATMEL_HLCDC_LAYER_OVR_IRQ(2));
+
+ /* Apply the new config at the next SOF event. */
+ sr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHSR);
+ atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHER,
+ ATMEL_HLCDC_LAYER_UPDATE |
+ (sr & ATMEL_HLCDC_LAYER_EN ?
+ ATMEL_HLCDC_LAYER_A2Q : ATMEL_HLCDC_LAYER_EN));
+}
+
+static void xlcdc_atomic_update(struct atmel_hlcdc_plane *plane,
+ struct atmel_hlcdc_dc *dc)
+{
+ /* Enable the overrun interrupts. */
+ atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_XLCDC_LAYER_IER,
+ ATMEL_XLCDC_LAYER_OVR_IRQ(0) |
+ ATMEL_XLCDC_LAYER_OVR_IRQ(1) |
+ ATMEL_XLCDC_LAYER_OVR_IRQ(2));
+
+ atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_XLCDC_LAYER_ENR,
+ ATMEL_XLCDC_LAYER_EN);
+
+ /*
+ * Updating XLCDC_xxxCFGx, XLCDC_xxxFBA and XLCDC_xxxEN,
+ * (where xxx indicates each layer) requires writing one to the
+ * Update Attribute field for each layer in LCDC_ATTRE register for SAM9X7.
+ */
+ regmap_write(dc->hlcdc->regmap, ATMEL_XLCDC_ATTRE, ATMEL_XLCDC_BASE_UPDATE |
+ ATMEL_XLCDC_OVR1_UPDATE | ATMEL_XLCDC_OVR3_UPDATE |
+ ATMEL_XLCDC_HEO_UPDATE);
+}
+
static void atmel_hlcdc_plane_atomic_update(struct drm_plane *p,
struct drm_atomic_state *state)
{
@@ -739,7 +904,7 @@ static void atmel_hlcdc_plane_atomic_update(struct drm_plane *p,
struct atmel_hlcdc_plane *plane = drm_plane_to_atmel_hlcdc_plane(p);
struct atmel_hlcdc_plane_state *hstate =
drm_plane_state_to_atmel_hlcdc_plane_state(new_s);
- u32 sr;
+ struct atmel_hlcdc_dc *dc = p->dev->dev_private;
if (!new_s->crtc || !new_s->fb)
return;
@@ -750,29 +915,63 @@ static void atmel_hlcdc_plane_atomic_update(struct drm_plane *p,
}
atmel_hlcdc_plane_update_pos_and_size(plane, hstate);
- atmel_hlcdc_plane_update_general_settings(plane, hstate);
+ dc->desc->ops->lcdc_update_general_settings(plane, hstate);
atmel_hlcdc_plane_update_format(plane, hstate);
atmel_hlcdc_plane_update_clut(plane, hstate);
atmel_hlcdc_plane_update_buffers(plane, hstate);
atmel_hlcdc_plane_update_disc_area(plane, hstate);
- /* Enable the overrun interrupts. */
- atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_IER,
- ATMEL_HLCDC_LAYER_OVR_IRQ(0) |
- ATMEL_HLCDC_LAYER_OVR_IRQ(1) |
- ATMEL_HLCDC_LAYER_OVR_IRQ(2));
+ dc->desc->ops->lcdc_atomic_update(plane, dc);
+}
- /* Apply the new config at the next SOF event. */
- sr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHSR);
- atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHER,
- ATMEL_HLCDC_LAYER_UPDATE |
- (sr & ATMEL_HLCDC_LAYER_EN ?
- ATMEL_HLCDC_LAYER_A2Q : ATMEL_HLCDC_LAYER_EN));
+static void hlcdc_csc_init(struct atmel_hlcdc_plane *plane,
+ const struct atmel_hlcdc_layer_desc *desc)
+{
+ /*
+ * TODO: declare a "yuv-to-rgb-conv-factors" property to let
+ * userspace modify these factors (using a BLOB property ?).
+ */
+ static const u32 hlcdc_csc_coeffs[] = {
+ 0x4c900091,
+ 0x7a5f5090,
+ 0x40040890
+ };
+
+ for (int i = 0; i < ARRAY_SIZE(hlcdc_csc_coeffs); i++) {
+ atmel_hlcdc_layer_write_cfg(&plane->layer,
+ desc->layout.csc + i,
+ hlcdc_csc_coeffs[i]);
+ }
+}
+
+static void xlcdc_csc_init(struct atmel_hlcdc_plane *plane,
+ const struct atmel_hlcdc_layer_desc *desc)
+{
+ /*
+ * yuv-to-rgb-conv-factors are now defined from LCDC_HEOCFG16 to
+ * LCDC_HEOCFG21 registers in SAM9X7.
+ */
+ static const u32 xlcdc_csc_coeffs[] = {
+ 0x00000488,
+ 0x00000648,
+ 0x1EA00480,
+ 0x00001D28,
+ 0x08100480,
+ 0x00000000,
+ 0x00000007
+ };
+
+ for (int i = 0; i < ARRAY_SIZE(xlcdc_csc_coeffs); i++) {
+ atmel_hlcdc_layer_write_cfg(&plane->layer,
+ desc->layout.csc + i,
+ xlcdc_csc_coeffs[i]);
+ }
}
static int atmel_hlcdc_plane_init_properties(struct atmel_hlcdc_plane *plane)
{
const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
+ struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private;
if (desc->type == ATMEL_HLCDC_OVERLAY_LAYER ||
desc->type == ATMEL_HLCDC_CURSOR_LAYER) {
@@ -796,31 +995,16 @@ static int atmel_hlcdc_plane_init_properties(struct atmel_hlcdc_plane *plane)
return ret;
}
- if (desc->layout.csc) {
- /*
- * TODO: decare a "yuv-to-rgb-conv-factors" property to let
- * userspace modify these factors (using a BLOB property ?).
- */
- atmel_hlcdc_layer_write_cfg(&plane->layer,
- desc->layout.csc,
- 0x4c900091);
- atmel_hlcdc_layer_write_cfg(&plane->layer,
- desc->layout.csc + 1,
- 0x7a5f5090);
- atmel_hlcdc_layer_write_cfg(&plane->layer,
- desc->layout.csc + 2,
- 0x40040890);
- }
+ if (desc->layout.csc)
+ dc->desc->ops->lcdc_csc_init(plane, desc);
return 0;
}
-void atmel_hlcdc_plane_irq(struct atmel_hlcdc_plane *plane)
+static void hlcdc_irq_dbg(struct atmel_hlcdc_plane *plane,
+ const struct atmel_hlcdc_layer_desc *desc)
{
- const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
- u32 isr;
-
- isr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_ISR);
+ u32 isr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_ISR);
/*
* There's not much we can do in case of overrun except informing
@@ -834,6 +1018,51 @@ void atmel_hlcdc_plane_irq(struct atmel_hlcdc_plane *plane)
desc->name);
}
+static void xlcdc_irq_dbg(struct atmel_hlcdc_plane *plane,
+ const struct atmel_hlcdc_layer_desc *desc)
+{
+ u32 isr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_XLCDC_LAYER_ISR);
+
+ /*
+ * There's not much we can do in case of overrun except informing
+ * the user. However, we are in interrupt context here, hence the
+ * use of dev_dbg().
+ */
+ if (isr &
+ (ATMEL_XLCDC_LAYER_OVR_IRQ(0) | ATMEL_XLCDC_LAYER_OVR_IRQ(1) |
+ ATMEL_XLCDC_LAYER_OVR_IRQ(2)))
+ dev_dbg(plane->base.dev->dev, "overrun on plane %s\n",
+ desc->name);
+}
+
+void atmel_hlcdc_plane_irq(struct atmel_hlcdc_plane *plane)
+{
+ const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
+ struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private;
+
+ dc->desc->ops->lcdc_irq_dbg(plane, desc);
+}
+
+const struct atmel_lcdc_dc_ops atmel_hlcdc_ops = {
+ .plane_setup_scaler = atmel_hlcdc_plane_setup_scaler,
+ .update_lcdc_buffers = update_hlcdc_buffers,
+ .lcdc_atomic_disable = hlcdc_atomic_disable,
+ .lcdc_update_general_settings = atmel_hlcdc_plane_update_general_settings,
+ .lcdc_atomic_update = hlcdc_atomic_update,
+ .lcdc_csc_init = hlcdc_csc_init,
+ .lcdc_irq_dbg = hlcdc_irq_dbg,
+};
+
+const struct atmel_lcdc_dc_ops atmel_xlcdc_ops = {
+ .plane_setup_scaler = atmel_xlcdc_plane_setup_scaler,
+ .update_lcdc_buffers = update_xlcdc_buffers,
+ .lcdc_atomic_disable = xlcdc_atomic_disable,
+ .lcdc_update_general_settings = atmel_xlcdc_plane_update_general_settings,
+ .lcdc_atomic_update = xlcdc_atomic_update,
+ .lcdc_csc_init = xlcdc_csc_init,
+ .lcdc_irq_dbg = xlcdc_irq_dbg,
+};
+
static const struct drm_plane_helper_funcs atmel_hlcdc_layer_plane_helper_funcs = {
.atomic_check = atmel_hlcdc_plane_atomic_check,
.atomic_update = atmel_hlcdc_plane_atomic_update,
--
2.25.1
Add support for Display Pixel Interface (DPI) Compatible Mode
support in atmel-hlcdc driver for XLCDC IP along with legacy
pixel mapping. DPI mode BIT is configured in LCDC_CFG5 register.
Signed-off-by: Manikandan Muralidharan <[email protected]>
[[email protected]: update DPI mode bit using is_xlcdc flag]
Signed-off-by: Durai Manickam KR <[email protected]>
---
.../gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c | 21 +++++++++++++++++--
1 file changed, 19 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
index 1ac31c0c474a..1899be2eb6a3 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
@@ -30,10 +30,12 @@
*
* @base: base CRTC state
* @output_mode: RGBXXX output mode
+ * @dpi: output DPI mode
*/
struct atmel_hlcdc_crtc_state {
struct drm_crtc_state base;
unsigned int output_mode;
+ u8 dpi;
};
static inline struct atmel_hlcdc_crtc_state *
@@ -164,6 +166,8 @@ static void atmel_hlcdc_crtc_mode_set_nofb(struct drm_crtc *c)
state = drm_crtc_state_to_atmel_hlcdc_crtc_state(c->state);
cfg = state->output_mode << 8;
+ if (is_xlcdc)
+ cfg |= state->dpi << 11;
if (!is_xlcdc && (adj->flags & DRM_MODE_FLAG_NVSYNC))
cfg |= ATMEL_HLCDC_VSPOL;
@@ -176,7 +180,9 @@ static void atmel_hlcdc_crtc_mode_set_nofb(struct drm_crtc *c)
ATMEL_HLCDC_VSPDLYS | ATMEL_HLCDC_VSPDLYE |
ATMEL_HLCDC_DISPPOL | ATMEL_HLCDC_DISPDLY |
ATMEL_HLCDC_VSPSU | ATMEL_HLCDC_VSPHO |
- ATMEL_HLCDC_GUARDTIME_MASK | ATMEL_HLCDC_MODE_MASK,
+ ATMEL_HLCDC_GUARDTIME_MASK |
+ (is_xlcdc ? ATMEL_XLCDC_MODE_MASK |
+ ATMEL_XLCDC_DPI : ATMEL_HLCDC_MODE_MASK),
cfg);
clk_disable_unprepare(crtc->dc->hlcdc->sys_clk);
@@ -374,7 +380,15 @@ static int atmel_hlcdc_crtc_select_output_mode(struct drm_crtc_state *state)
hstate = drm_crtc_state_to_atmel_hlcdc_crtc_state(state);
hstate->output_mode = fls(output_fmts) - 1;
-
+ if (crtc->dc->desc->is_xlcdc) {
+ /* check if MIPI DPI bit needs to be set */
+ if (fls(output_fmts) > 3) {
+ hstate->output_mode -= 4;
+ hstate->dpi = 1;
+ } else {
+ hstate->dpi = 0;
+ }
+ }
return 0;
}
@@ -478,6 +492,7 @@ static struct drm_crtc_state *
atmel_hlcdc_crtc_duplicate_state(struct drm_crtc *crtc)
{
struct atmel_hlcdc_crtc_state *state, *cur;
+ struct atmel_hlcdc_crtc *c = drm_crtc_to_atmel_hlcdc_crtc(crtc);
if (WARN_ON(!crtc->state))
return NULL;
@@ -489,6 +504,8 @@ atmel_hlcdc_crtc_duplicate_state(struct drm_crtc *crtc)
cur = drm_crtc_state_to_atmel_hlcdc_crtc_state(crtc->state);
state->output_mode = cur->output_mode;
+ if (c->dc->desc->is_xlcdc)
+ state->dpi = cur->dpi;
return &state->base;
}
--
2.25.1
On 29.01.2024 11:23, Manikandan Muralidharan wrote:
> XLCDC in SAM9X7 has different sets of registers and additional
> configuration bits when compared to previous HLCDC IP. Read/write
> operation on the controller registers is now separated using the
> XLCDC status flag and with HLCDC and XLCDC IP specific ops.
> HEO scaling, window resampling, Alpha blending, YUV-to-RGB
> conversion in XLCDC is derived and handled using additional
> configuration bits and registers. Writing one to the Enable fields
> of each layer in LCD_ATTRE is required to reflect the values set
> in Configuration, FBA, Enable registers of each layer.
>
> Signed-off-by: Manikandan Muralidharan <[email protected]>
> Co-developed-by: Hari Prasath Gujulan Elango <[email protected]>
> Signed-off-by: Hari Prasath Gujulan Elango <[email protected]>
> Co-developed-by: Durai Manickam KR <[email protected]>
> Signed-off-by: Durai Manickam KR <[email protected]>
> ---
> .../gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c | 33 +-
> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c | 6 +
> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h | 3 +
> .../gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c | 349 +++++++++++++++---
> 4 files changed, 329 insertions(+), 62 deletions(-)
>
> diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
> index cc5cf4c2faf7..1ac31c0c474a 100644
> --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
> +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
> @@ -79,6 +79,7 @@ static void atmel_hlcdc_crtc_mode_set_nofb(struct drm_crtc *c)
> unsigned int mask = ATMEL_HLCDC_CLKDIV_MASK | ATMEL_HLCDC_CLKPOL;
> unsigned int cfg = 0;
> int div, ret;
> + bool is_xlcdc = crtc->dc->desc->is_xlcdc;
You may want to keep reverse christmass tree order, with this, though the
mask variable breaks it.
>
> /* get encoder from crtc */
> drm_for_each_encoder(en_iter, ddev) {
> @@ -164,10 +165,10 @@ static void atmel_hlcdc_crtc_mode_set_nofb(struct drm_crtc *c)
> state = drm_crtc_state_to_atmel_hlcdc_crtc_state(c->state);
> cfg = state->output_mode << 8;
>
> - if (adj->flags & DRM_MODE_FLAG_NVSYNC)
> + if (!is_xlcdc && (adj->flags & DRM_MODE_FLAG_NVSYNC))
> cfg |= ATMEL_HLCDC_VSPOL;
>
> - if (adj->flags & DRM_MODE_FLAG_NHSYNC)
> + if (!is_xlcdc && (adj->flags & DRM_MODE_FLAG_NHSYNC))
> cfg |= ATMEL_HLCDC_HSPOL;
Instead of checking 2 times the !is_xlcdc you can have on check: e.g.:
if (!is_xlcdc) {
if (adj->flags & DRM_MODE_FLAG_NVSYNC)
cfg |= ATMEL_HLCDC_VSPOL;
if (adj->flags & DRM_MODE_FLAG_NHSYNC)
cfg |= ATMEL_HLCDC_HSPOL;
}
>
> regmap_update_bits(regmap, ATMEL_HLCDC_CFG(5),
> @@ -202,6 +203,20 @@ static void atmel_hlcdc_crtc_atomic_disable(struct drm_crtc *c,
>
> pm_runtime_get_sync(dev->dev);
>
> + if (crtc->dc->desc->is_xlcdc) {
> + regmap_write(regmap, ATMEL_HLCDC_DIS, ATMEL_XLCDC_CM);
> + if (regmap_read_poll_timeout(regmap, ATMEL_HLCDC_SR, status,
> + !(status & ATMEL_XLCDC_CM),
> + 10, 1000))
> + dev_warn(dev->dev, "Atmel LCDC status register CMSTS timeout\n");
> +
> + regmap_write(regmap, ATMEL_HLCDC_DIS, ATMEL_XLCDC_SD);
> + if (regmap_read_poll_timeout(regmap, ATMEL_HLCDC_SR, status,
> + status & ATMEL_XLCDC_SD,
> + 10, 1000))
> + dev_warn(dev->dev, "Atmel LCDC status register SDSTS timeout\n");
> + }
> +
> regmap_write(regmap, ATMEL_HLCDC_DIS, ATMEL_HLCDC_DISP);
> while (!regmap_read(regmap, ATMEL_HLCDC_SR, &status) &&
Not related to this patch: it may worth implementing the same approach
accross all bits polling instructions in this function.
> (status & ATMEL_HLCDC_DISP))
> @@ -256,6 +271,20 @@ static void atmel_hlcdc_crtc_atomic_enable(struct drm_crtc *c,
> !(status & ATMEL_HLCDC_DISP))
> cpu_relax();
>
> + if (crtc->dc->desc->is_xlcdc) {
> + regmap_write(regmap, ATMEL_HLCDC_EN, ATMEL_XLCDC_CM);
> + if (regmap_read_poll_timeout(regmap, ATMEL_HLCDC_SR, status,
> + status & ATMEL_XLCDC_CM,
> + 10, 1000))
> + dev_warn(dev->dev, "Atmel LCDC status register CMSTS timeout\n");
> +
> + regmap_write(regmap, ATMEL_HLCDC_EN, ATMEL_XLCDC_SD);
> + if (regmap_read_poll_timeout(regmap, ATMEL_HLCDC_SR, status,
> + !(status & ATMEL_XLCDC_SD),
> + 10, 1000))
> + dev_warn(dev->dev, "Atmel LCDC status register SDSTS timeout\n");
> + }
> +
> pm_runtime_put_sync(dev->dev);
>
> }
> diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
> index d30aec174aa2..18a3a95f94be 100644
> --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
> +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
> @@ -58,6 +58,7 @@ static const struct atmel_hlcdc_dc_desc atmel_hlcdc_dc_at91sam9n12 = {
> .conflicting_output_formats = true,
> .nlayers = ARRAY_SIZE(atmel_hlcdc_at91sam9n12_layers),
> .layers = atmel_hlcdc_at91sam9n12_layers,
> + .ops = &atmel_hlcdc_ops,
> };
>
> static const struct atmel_hlcdc_layer_desc atmel_hlcdc_at91sam9x5_layers[] = {
> @@ -151,6 +152,7 @@ static const struct atmel_hlcdc_dc_desc atmel_hlcdc_dc_at91sam9x5 = {
> .conflicting_output_formats = true,
> .nlayers = ARRAY_SIZE(atmel_hlcdc_at91sam9x5_layers),
> .layers = atmel_hlcdc_at91sam9x5_layers,
> + .ops = &atmel_hlcdc_ops,
> };
>
> static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sama5d3_layers[] = {
> @@ -269,6 +271,7 @@ static const struct atmel_hlcdc_dc_desc atmel_hlcdc_dc_sama5d3 = {
> .conflicting_output_formats = true,
> .nlayers = ARRAY_SIZE(atmel_hlcdc_sama5d3_layers),
> .layers = atmel_hlcdc_sama5d3_layers,
> + .ops = &atmel_hlcdc_ops,
> };
>
> static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sama5d4_layers[] = {
> @@ -364,6 +367,7 @@ static const struct atmel_hlcdc_dc_desc atmel_hlcdc_dc_sama5d4 = {
> .max_hpw = 0x3ff,
> .nlayers = ARRAY_SIZE(atmel_hlcdc_sama5d4_layers),
> .layers = atmel_hlcdc_sama5d4_layers,
> + .ops = &atmel_hlcdc_ops,
> };
>
> static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sam9x60_layers[] = {
> @@ -460,6 +464,7 @@ static const struct atmel_hlcdc_dc_desc atmel_hlcdc_dc_sam9x60 = {
> .fixed_clksrc = true,
> .nlayers = ARRAY_SIZE(atmel_hlcdc_sam9x60_layers),
> .layers = atmel_hlcdc_sam9x60_layers,
> + .ops = &atmel_hlcdc_ops,
> };
>
> static const struct atmel_hlcdc_layer_desc atmel_xlcdc_sam9x75_layers[] = {
> @@ -553,6 +558,7 @@ static const struct atmel_hlcdc_dc_desc atmel_xlcdc_dc_sam9x75 = {
> .is_xlcdc = true,
> .nlayers = ARRAY_SIZE(atmel_xlcdc_sam9x75_layers),
> .layers = atmel_xlcdc_sam9x75_layers,
> + .ops = &atmel_xlcdc_ops,
> };
>
> static const struct of_device_id atmel_hlcdc_of_match[] = {
> diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h
> index e6b4b0bb11b9..1ef15f2d536c 100644
> --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h
> +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h
> @@ -424,6 +424,9 @@ struct atmel_hlcdc_dc {
> } suspend;
> };
>
> +extern const struct atmel_lcdc_dc_ops atmel_hlcdc_ops;
> +extern const struct atmel_lcdc_dc_ops atmel_xlcdc_ops;
> +
> extern struct atmel_hlcdc_formats atmel_hlcdc_plane_rgb_formats;
> extern struct atmel_hlcdc_formats atmel_hlcdc_plane_rgb_and_yuv_formats;
>
> diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
> index daa508504f47..59ddd743ce92 100644
> --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
> +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
> @@ -282,8 +282,9 @@ atmel_hlcdc_plane_scaler_set_phicoeff(struct atmel_hlcdc_plane *plane,
> coeff_tab[i]);
> }
>
> -static void atmel_hlcdc_plane_setup_scaler(struct atmel_hlcdc_plane *plane,
> - struct atmel_hlcdc_plane_state *state)
> +static
> +void atmel_hlcdc_plane_setup_scaler(struct atmel_hlcdc_plane *plane,
> + struct atmel_hlcdc_plane_state *state)
> {
> const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
> u32 xfactor, yfactor;
> @@ -330,11 +331,61 @@ static void atmel_hlcdc_plane_setup_scaler(struct atmel_hlcdc_plane *plane,
> yfactor));
> }
>
> +static
> +void atmel_xlcdc_plane_setup_scaler(struct atmel_hlcdc_plane *plane,
> + struct atmel_hlcdc_plane_state *state)
> +{
> + const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
> + u32 xfactor, yfactor;
> +
> + if (!desc->layout.scaler_config)
> + return;
> +
> + if (state->crtc_w == state->src_w && state->crtc_h == state->src_h) {
> + atmel_hlcdc_layer_write_cfg(&plane->layer,
> + desc->layout.scaler_config, 0);
> + return;
> + }
> +
> + /* xfactor = round[(2^20 * XMEMSIZE)/XSIZE)] */
> + xfactor = (u32)(((1 << 20) * state->src_w) / state->crtc_w);
> +
> + /* yfactor = round[(2^20 * YMEMSIZE)/YSIZE)] */
> + yfactor = (u32)(((1 << 20) * state->src_h) / state->crtc_h);
> +
> + atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config,
> + ATMEL_XLCDC_LAYER_VSCALER_LUMA_ENABLE |
> + ATMEL_XLCDC_LAYER_VSCALER_CHROMA_ENABLE |
> + ATMEL_XLCDC_LAYER_HSCALER_LUMA_ENABLE |
> + ATMEL_XLCDC_LAYER_HSCALER_CHROMA_ENABLE);
> +
> + atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 1,
> + yfactor);
> + atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 3,
> + xfactor);
> +
> + /*
> + * With YCbCr 4:2:2 and YCbYcr 4:2:0 window resampling, configuration
> + * register LCDC_HEOCFG25.VXSCFACT and LCDC_HEOCFG27.HXSCFACT is half
> + * the value of yfactor and xfactor.
> + */
> + if (state->base.fb->format->format == DRM_FORMAT_YUV420) {
> + yfactor /= 2;
> + xfactor /= 2;
> + }
> +
> + atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 2,
> + yfactor);
> + atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 4,
> + xfactor);
> +}
> +
> static void
> atmel_hlcdc_plane_update_pos_and_size(struct atmel_hlcdc_plane *plane,
> struct atmel_hlcdc_plane_state *state)
> {
> const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
> + struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private;
>
> if (desc->layout.size)
> atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.size,
> @@ -352,12 +403,12 @@ atmel_hlcdc_plane_update_pos_and_size(struct atmel_hlcdc_plane *plane,
> ATMEL_HLCDC_LAYER_POS(state->crtc_x,
> state->crtc_y));
>
> - atmel_hlcdc_plane_setup_scaler(plane, state);
> + dc->desc->ops->plane_setup_scaler(plane, state);
> }
>
> -static void
> -atmel_hlcdc_plane_update_general_settings(struct atmel_hlcdc_plane *plane,
> - struct atmel_hlcdc_plane_state *state)
> +static
> +void atmel_hlcdc_plane_update_general_settings(struct atmel_hlcdc_plane *plane,
> + struct atmel_hlcdc_plane_state *state)
> {
> unsigned int cfg = ATMEL_HLCDC_LAYER_DMA_BLEN_INCR16 | state->ahb_id;
> const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
> @@ -393,6 +444,40 @@ atmel_hlcdc_plane_update_general_settings(struct atmel_hlcdc_plane *plane,
> cfg);
> }
>
> +static
> +void atmel_xlcdc_plane_update_general_settings(struct atmel_hlcdc_plane *plane,
> + struct atmel_hlcdc_plane_state *state)
> +{
> + const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
> + const struct drm_format_info *format = state->base.fb->format;
> + unsigned int cfg;
> +
> + atmel_hlcdc_layer_write_cfg(&plane->layer, ATMEL_XLCDC_LAYER_DMA_CFG,
> + ATMEL_HLCDC_LAYER_DMA_BLEN_INCR16 | state->ahb_id);
> +
> + cfg = ATMEL_XLCDC_LAYER_DMA | ATMEL_XLCDC_LAYER_REP;
> +
> + if (plane->base.type != DRM_PLANE_TYPE_PRIMARY) {
> + /*
> + * Alpha Blending bits specific to SAM9X7 SoC
> + */
> + cfg |= ATMEL_XLCDC_LAYER_SFACTC_A0_MULT_AS |
> + ATMEL_XLCDC_LAYER_SFACTA_ONE |
> + ATMEL_XLCDC_LAYER_DFACTC_M_A0_MULT_AS |
> + ATMEL_XLCDC_LAYER_DFACTA_ONE;
> + if (format->has_alpha)
> + cfg |= ATMEL_XLCDC_LAYER_A0(0xff);
> + else
> + cfg |= ATMEL_XLCDC_LAYER_A0(state->base.alpha);
> + }
> +
> + if (state->disc_h && state->disc_w)
> + cfg |= ATMEL_XLCDC_LAYER_DISCEN;
> +
> + atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.general_config,
> + cfg);
> +}
> +
> static void atmel_hlcdc_plane_update_format(struct atmel_hlcdc_plane *plane,
> struct atmel_hlcdc_plane_state *state)
> {
> @@ -437,36 +522,55 @@ static void atmel_hlcdc_plane_update_clut(struct atmel_hlcdc_plane *plane,
> }
> }
>
> +static void update_hlcdc_buffers(struct atmel_hlcdc_plane *plane,
> + struct atmel_hlcdc_plane_state *state,
> + u32 sr, int i)
> +{
> + atmel_hlcdc_layer_write_reg(&plane->layer,
> + ATMEL_HLCDC_LAYER_PLANE_HEAD(i),
> + state->dscrs[i]->self);
> +
> + if (sr & ATMEL_HLCDC_LAYER_EN)
> + return;
> +
> + atmel_hlcdc_layer_write_reg(&plane->layer,
> + ATMEL_HLCDC_LAYER_PLANE_ADDR(i),
> + state->dscrs[i]->addr);
> + atmel_hlcdc_layer_write_reg(&plane->layer,
> + ATMEL_HLCDC_LAYER_PLANE_CTRL(i),
> + state->dscrs[i]->ctrl);
> + atmel_hlcdc_layer_write_reg(&plane->layer,
> + ATMEL_HLCDC_LAYER_PLANE_NEXT(i),
> + state->dscrs[i]->self);
> +}
> +
> +static void update_xlcdc_buffers(struct atmel_hlcdc_plane *plane,
> + struct atmel_hlcdc_plane_state *state,
> + u32 sr, int i)
> +{
> + atmel_hlcdc_layer_write_reg(&plane->layer,
> + ATMEL_XLCDC_LAYER_PLANE_ADDR(i),
> + state->dscrs[i]->addr);
> +}
> +
> static void atmel_hlcdc_plane_update_buffers(struct atmel_hlcdc_plane *plane,
> - struct atmel_hlcdc_plane_state *state)
> + struct atmel_hlcdc_plane_state *state)
> {
> const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
> + struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private;
> struct drm_framebuffer *fb = state->base.fb;
> u32 sr;
> int i;
>
> - sr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHSR);
> + if (!dc->desc->is_xlcdc)
> + sr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHSR);
>
> for (i = 0; i < state->nplanes; i++) {
> struct drm_gem_dma_object *gem = drm_fb_dma_get_gem_obj(fb, i);
>
> state->dscrs[i]->addr = gem->dma_addr + state->offsets[i];
>
> - atmel_hlcdc_layer_write_reg(&plane->layer,
> - ATMEL_HLCDC_LAYER_PLANE_HEAD(i),
> - state->dscrs[i]->self);
> -
> - if (!(sr & ATMEL_HLCDC_LAYER_EN)) {
> - atmel_hlcdc_layer_write_reg(&plane->layer,
> - ATMEL_HLCDC_LAYER_PLANE_ADDR(i),
> - state->dscrs[i]->addr);
> - atmel_hlcdc_layer_write_reg(&plane->layer,
> - ATMEL_HLCDC_LAYER_PLANE_CTRL(i),
> - state->dscrs[i]->ctrl);
> - atmel_hlcdc_layer_write_reg(&plane->layer,
> - ATMEL_HLCDC_LAYER_PLANE_NEXT(i),
> - state->dscrs[i]->self);
> - }
> + dc->desc->ops->update_lcdc_buffers(plane, state, sr, i);
>
> if (desc->layout.xstride[i])
> atmel_hlcdc_layer_write_cfg(&plane->layer,
> @@ -712,11 +816,8 @@ static int atmel_hlcdc_plane_atomic_check(struct drm_plane *p,
> return 0;
> }
>
> -static void atmel_hlcdc_plane_atomic_disable(struct drm_plane *p,
> - struct drm_atomic_state *state)
> +static void hlcdc_atomic_disable(struct atmel_hlcdc_plane *plane)
> {
> - struct atmel_hlcdc_plane *plane = drm_plane_to_atmel_hlcdc_plane(p);
> -
> /* Disable interrupts */
> atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_IDR,
> 0xffffffff);
> @@ -731,6 +832,70 @@ static void atmel_hlcdc_plane_atomic_disable(struct drm_plane *p,
> atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_ISR);
> }
>
> +static void xlcdc_atomic_disable(struct atmel_hlcdc_plane *plane)
> +{
> + /* Disable interrupts */
> + atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_XLCDC_LAYER_IDR,
> + 0xffffffff);
> +
> + /* Disable the layer */
> + atmel_hlcdc_layer_write_reg(&plane->layer,
> + ATMEL_XLCDC_LAYER_ENR, 0);
> +
> + /* Clear all pending interrupts */
> + atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_XLCDC_LAYER_ISR);
> +}
> +
> +static void atmel_hlcdc_plane_atomic_disable(struct drm_plane *p,
> + struct drm_atomic_state *state)
> +{
> + struct atmel_hlcdc_plane *plane = drm_plane_to_atmel_hlcdc_plane(p);
> + struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private;
> +
> + dc->desc->ops->lcdc_atomic_disable(plane);
> +}
> +
> +static void hlcdc_atomic_update(struct atmel_hlcdc_plane *plane,
> + struct atmel_hlcdc_dc *dc)
> +{
> + u32 sr;
> +
> + /* Enable the overrun interrupts. */
> + atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_IER,
> + ATMEL_HLCDC_LAYER_OVR_IRQ(0) |
> + ATMEL_HLCDC_LAYER_OVR_IRQ(1) |
> + ATMEL_HLCDC_LAYER_OVR_IRQ(2));
> +
> + /* Apply the new config at the next SOF event. */
> + sr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHSR);
> + atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHER,
> + ATMEL_HLCDC_LAYER_UPDATE |
> + (sr & ATMEL_HLCDC_LAYER_EN ?
> + ATMEL_HLCDC_LAYER_A2Q : ATMEL_HLCDC_LAYER_EN));
> +}
> +
> +static void xlcdc_atomic_update(struct atmel_hlcdc_plane *plane,
> + struct atmel_hlcdc_dc *dc)
> +{
> + /* Enable the overrun interrupts. */
> + atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_XLCDC_LAYER_IER,
> + ATMEL_XLCDC_LAYER_OVR_IRQ(0) |
> + ATMEL_XLCDC_LAYER_OVR_IRQ(1) |
> + ATMEL_XLCDC_LAYER_OVR_IRQ(2));
> +
> + atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_XLCDC_LAYER_ENR,
> + ATMEL_XLCDC_LAYER_EN);
> +
> + /*
> + * Updating XLCDC_xxxCFGx, XLCDC_xxxFBA and XLCDC_xxxEN,
> + * (where xxx indicates each layer) requires writing one to the
> + * Update Attribute field for each layer in LCDC_ATTRE register for SAM9X7.
> + */
> + regmap_write(dc->hlcdc->regmap, ATMEL_XLCDC_ATTRE, ATMEL_XLCDC_BASE_UPDATE |
> + ATMEL_XLCDC_OVR1_UPDATE | ATMEL_XLCDC_OVR3_UPDATE |
> + ATMEL_XLCDC_HEO_UPDATE);
> +}
> +
> static void atmel_hlcdc_plane_atomic_update(struct drm_plane *p,
> struct drm_atomic_state *state)
> {
> @@ -739,7 +904,7 @@ static void atmel_hlcdc_plane_atomic_update(struct drm_plane *p,
> struct atmel_hlcdc_plane *plane = drm_plane_to_atmel_hlcdc_plane(p);
> struct atmel_hlcdc_plane_state *hstate =
> drm_plane_state_to_atmel_hlcdc_plane_state(new_s);
> - u32 sr;
> + struct atmel_hlcdc_dc *dc = p->dev->dev_private;
>
> if (!new_s->crtc || !new_s->fb)
> return;
> @@ -750,29 +915,63 @@ static void atmel_hlcdc_plane_atomic_update(struct drm_plane *p,
> }
>
> atmel_hlcdc_plane_update_pos_and_size(plane, hstate);
> - atmel_hlcdc_plane_update_general_settings(plane, hstate);
> + dc->desc->ops->lcdc_update_general_settings(plane, hstate);
> atmel_hlcdc_plane_update_format(plane, hstate);
> atmel_hlcdc_plane_update_clut(plane, hstate);
> atmel_hlcdc_plane_update_buffers(plane, hstate);
> atmel_hlcdc_plane_update_disc_area(plane, hstate);
>
> - /* Enable the overrun interrupts. */
> - atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_IER,
> - ATMEL_HLCDC_LAYER_OVR_IRQ(0) |
> - ATMEL_HLCDC_LAYER_OVR_IRQ(1) |
> - ATMEL_HLCDC_LAYER_OVR_IRQ(2));
> + dc->desc->ops->lcdc_atomic_update(plane, dc);
> +}
>
> - /* Apply the new config at the next SOF event. */
> - sr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHSR);
> - atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHER,
> - ATMEL_HLCDC_LAYER_UPDATE |
> - (sr & ATMEL_HLCDC_LAYER_EN ?
> - ATMEL_HLCDC_LAYER_A2Q : ATMEL_HLCDC_LAYER_EN));
> +static void hlcdc_csc_init(struct atmel_hlcdc_plane *plane,
> + const struct atmel_hlcdc_layer_desc *desc)
> +{
> + /*
> + * TODO: declare a "yuv-to-rgb-conv-factors" property to let
> + * userspace modify these factors (using a BLOB property ?).
> + */
> + static const u32 hlcdc_csc_coeffs[] = {
> + 0x4c900091,
> + 0x7a5f5090,
> + 0x40040890
> + };
> +
> + for (int i = 0; i < ARRAY_SIZE(hlcdc_csc_coeffs); i++) {
> + atmel_hlcdc_layer_write_cfg(&plane->layer,
> + desc->layout.csc + i,
> + hlcdc_csc_coeffs[i]);
> + }
> +}
> +
> +static void xlcdc_csc_init(struct atmel_hlcdc_plane *plane,
> + const struct atmel_hlcdc_layer_desc *desc)
> +{
> + /*
> + * yuv-to-rgb-conv-factors are now defined from LCDC_HEOCFG16 to
> + * LCDC_HEOCFG21 registers in SAM9X7.
> + */
> + static const u32 xlcdc_csc_coeffs[] = {
> + 0x00000488,
> + 0x00000648,
> + 0x1EA00480,
> + 0x00001D28,
> + 0x08100480,
> + 0x00000000,
> + 0x00000007
> + };
> +
> + for (int i = 0; i < ARRAY_SIZE(xlcdc_csc_coeffs); i++) {
> + atmel_hlcdc_layer_write_cfg(&plane->layer,
> + desc->layout.csc + i,
> + xlcdc_csc_coeffs[i]);
> + }
> }
>
> static int atmel_hlcdc_plane_init_properties(struct atmel_hlcdc_plane *plane)
> {
> const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
> + struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private;
>
> if (desc->type == ATMEL_HLCDC_OVERLAY_LAYER ||
> desc->type == ATMEL_HLCDC_CURSOR_LAYER) {
> @@ -796,31 +995,16 @@ static int atmel_hlcdc_plane_init_properties(struct atmel_hlcdc_plane *plane)
> return ret;
> }
>
> - if (desc->layout.csc) {
> - /*
> - * TODO: decare a "yuv-to-rgb-conv-factors" property to let
> - * userspace modify these factors (using a BLOB property ?).
> - */
> - atmel_hlcdc_layer_write_cfg(&plane->layer,
> - desc->layout.csc,
> - 0x4c900091);
> - atmel_hlcdc_layer_write_cfg(&plane->layer,
> - desc->layout.csc + 1,
> - 0x7a5f5090);
> - atmel_hlcdc_layer_write_cfg(&plane->layer,
> - desc->layout.csc + 2,
> - 0x40040890);
> - }
> + if (desc->layout.csc)
> + dc->desc->ops->lcdc_csc_init(plane, desc);
>
> return 0;
> }
>
> -void atmel_hlcdc_plane_irq(struct atmel_hlcdc_plane *plane)
> +static void hlcdc_irq_dbg(struct atmel_hlcdc_plane *plane,
> + const struct atmel_hlcdc_layer_desc *desc)
> {
> - const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
> - u32 isr;
> -
> - isr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_ISR);
> + u32 isr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_ISR);
>
> /*
> * There's not much we can do in case of overrun except informing
> @@ -834,6 +1018,51 @@ void atmel_hlcdc_plane_irq(struct atmel_hlcdc_plane *plane)
> desc->name);
> }
>
> +static void xlcdc_irq_dbg(struct atmel_hlcdc_plane *plane,
> + const struct atmel_hlcdc_layer_desc *desc)
> +{
> + u32 isr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_XLCDC_LAYER_ISR);
> +
> + /*
> + * There's not much we can do in case of overrun except informing
> + * the user. However, we are in interrupt context here, hence the
> + * use of dev_dbg().
> + */
> + if (isr &
> + (ATMEL_XLCDC_LAYER_OVR_IRQ(0) | ATMEL_XLCDC_LAYER_OVR_IRQ(1) |
> + ATMEL_XLCDC_LAYER_OVR_IRQ(2)))
> + dev_dbg(plane->base.dev->dev, "overrun on plane %s\n",
> + desc->name);
> +}
> +
> +void atmel_hlcdc_plane_irq(struct atmel_hlcdc_plane *plane)
> +{
> + const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
> + struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private;
> +
> + dc->desc->ops->lcdc_irq_dbg(plane, desc);
> +}
> +
> +const struct atmel_lcdc_dc_ops atmel_hlcdc_ops = {
> + .plane_setup_scaler = atmel_hlcdc_plane_setup_scaler,
> + .update_lcdc_buffers = update_hlcdc_buffers,
> + .lcdc_atomic_disable = hlcdc_atomic_disable,
> + .lcdc_update_general_settings = atmel_hlcdc_plane_update_general_settings,
> + .lcdc_atomic_update = hlcdc_atomic_update,
> + .lcdc_csc_init = hlcdc_csc_init,
> + .lcdc_irq_dbg = hlcdc_irq_dbg,
> +};
All the changes related to HLCDC (this new object, changes in
atmel_hlcdc_dc.{c,h}, hlcdc changes in atmel_hlcdc_plane.c) should go in a
separate patch (I think patch 1 is the good candidate but remove xlcdc
specific changes from there) where you update current code to use this new
object and then the next patches will be XLCDC support.
> +
> +const struct atmel_lcdc_dc_ops atmel_xlcdc_ops = {
> + .plane_setup_scaler = atmel_xlcdc_plane_setup_scaler,
> + .update_lcdc_buffers = update_xlcdc_buffers,
> + .lcdc_atomic_disable = xlcdc_atomic_disable,
> + .lcdc_update_general_settings = atmel_xlcdc_plane_update_general_settings,
> + .lcdc_atomic_update = xlcdc_atomic_update,
> + .lcdc_csc_init = xlcdc_csc_init,
> + .lcdc_irq_dbg = xlcdc_irq_dbg,
> +};
> +
> static const struct drm_plane_helper_funcs atmel_hlcdc_layer_plane_helper_funcs = {
> .atomic_check = atmel_hlcdc_plane_atomic_check,
> .atomic_update = atmel_hlcdc_plane_atomic_update,
On 29.01.2024 11:23, Manikandan Muralidharan wrote:
> Add support for the following DPI mode if the encoder type
> is DSI as per the XLCDC IP datasheet:
> - 16BPPCFG1
> - 16BPPCFG2
> - 16BPPCFG3
> - 18BPPCFG1
> - 18BPPCFG2
> - 24BPP
>
> Signed-off-by: Manikandan Muralidharan <[email protected]>
> [[email protected]: update output format using is_xlcdc flag]
> Signed-off-by: Durai Manickam KR <[email protected]>
> ---
> .../gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c | 123 +++++++++++++-----
> 1 file changed, 88 insertions(+), 35 deletions(-)
>
> diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
> index 1899be2eb6a3..6f529769b036 100644
> --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
> +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
> @@ -295,11 +295,18 @@ static void atmel_hlcdc_crtc_atomic_enable(struct drm_crtc *c,
>
> }
>
> -#define ATMEL_HLCDC_RGB444_OUTPUT BIT(0)
> -#define ATMEL_HLCDC_RGB565_OUTPUT BIT(1)
> -#define ATMEL_HLCDC_RGB666_OUTPUT BIT(2)
> -#define ATMEL_HLCDC_RGB888_OUTPUT BIT(3)
> -#define ATMEL_HLCDC_OUTPUT_MODE_MASK GENMASK(3, 0)
> +#define ATMEL_HLCDC_RGB444_OUTPUT BIT(0)
> +#define ATMEL_HLCDC_RGB565_OUTPUT BIT(1)
> +#define ATMEL_HLCDC_RGB666_OUTPUT BIT(2)
> +#define ATMEL_HLCDC_RGB888_OUTPUT BIT(3)
> +#define ATMEL_HLCDC_DPI_RGB565C1_OUTPUT BIT(4)
> +#define ATMEL_HLCDC_DPI_RGB565C2_OUTPUT BIT(5)
> +#define ATMEL_HLCDC_DPI_RGB565C3_OUTPUT BIT(6)
> +#define ATMEL_HLCDC_DPI_RGB666C1_OUTPUT BIT(7)
> +#define ATMEL_HLCDC_DPI_RGB666C2_OUTPUT BIT(8)
> +#define ATMEL_HLCDC_DPI_RGB888_OUTPUT BIT(9)
> +#define ATMEL_HLCDC_OUTPUT_MODE_MASK GENMASK(3, 0)
> +#define ATMEL_XLCDC_OUTPUT_MODE_MASK GENMASK(9, 0)
>
> static int atmel_hlcdc_connector_output_mode(struct drm_connector_state *state)
> {
> @@ -313,53 +320,99 @@ static int atmel_hlcdc_connector_output_mode(struct drm_connector_state *state)
> if (!encoder)
> encoder = connector->encoder;
>
> - switch (atmel_hlcdc_encoder_get_bus_fmt(encoder)) {
> - case 0:
> - break;
> - case MEDIA_BUS_FMT_RGB444_1X12:
> - return ATMEL_HLCDC_RGB444_OUTPUT;
> - case MEDIA_BUS_FMT_RGB565_1X16:
> - return ATMEL_HLCDC_RGB565_OUTPUT;
> - case MEDIA_BUS_FMT_RGB666_1X18:
> - return ATMEL_HLCDC_RGB666_OUTPUT;
> - case MEDIA_BUS_FMT_RGB888_1X24:
> - return ATMEL_HLCDC_RGB888_OUTPUT;
> - default:
> - return -EINVAL;
> - }
> -
> - for (j = 0; j < info->num_bus_formats; j++) {
> - switch (info->bus_formats[j]) {
> - case MEDIA_BUS_FMT_RGB444_1X12:
> - supported_fmts |= ATMEL_HLCDC_RGB444_OUTPUT;
To generate less diff here and have a cleaner code you can move all this
DSI specific code in a different function and have here something like:
if (encoder->encoder_type == DRM_MODE_ENCODER_DSI)
return atmel_hlcdc_connector_output_dsi();
> + if (encoder->encoder_type == DRM_MODE_ENCODER_DSI) {
> + /*
> + * atmel-hlcdc to support DSI formats with DSI video pipeline
> + * when DRM_MODE_ENCODER_DSI type is set by
> + * connector driver component.
> + */
> + switch (atmel_hlcdc_encoder_get_bus_fmt(encoder)) {
> + case 0:
> break;
> case MEDIA_BUS_FMT_RGB565_1X16:
> - supported_fmts |= ATMEL_HLCDC_RGB565_OUTPUT;
> - break;
> + return ATMEL_HLCDC_DPI_RGB565C1_OUTPUT;
> case MEDIA_BUS_FMT_RGB666_1X18:
> - supported_fmts |= ATMEL_HLCDC_RGB666_OUTPUT;
> - break;
> + return ATMEL_HLCDC_DPI_RGB666C1_OUTPUT;
> + case MEDIA_BUS_FMT_RGB666_1X24_CPADHI:
> + return ATMEL_HLCDC_DPI_RGB666C2_OUTPUT;
> case MEDIA_BUS_FMT_RGB888_1X24:
> - supported_fmts |= ATMEL_HLCDC_RGB888_OUTPUT;
> - break;
> + return ATMEL_HLCDC_DPI_RGB888_OUTPUT;
> default:
> + return -EINVAL;
> + }
> +
> + for (j = 0; j < info->num_bus_formats; j++) {
> + switch (info->bus_formats[j]) {
> + case MEDIA_BUS_FMT_RGB565_1X16:
> + supported_fmts |=
> + ATMEL_HLCDC_DPI_RGB565C1_OUTPUT;
> + break;
> + case MEDIA_BUS_FMT_RGB666_1X18:
> + supported_fmts |=
> + ATMEL_HLCDC_DPI_RGB666C1_OUTPUT;
> + break;
> + case MEDIA_BUS_FMT_RGB666_1X24_CPADHI:
> + supported_fmts |=
> + ATMEL_HLCDC_DPI_RGB666C2_OUTPUT;
> + break;
> + case MEDIA_BUS_FMT_RGB888_1X24:
> + supported_fmts |=
> + ATMEL_HLCDC_DPI_RGB888_OUTPUT;
> + break;
> + default:
> + break;
> + }
> + }
> + } else {
> + switch (atmel_hlcdc_encoder_get_bus_fmt(encoder)) {
> + case 0:
> break;
> + case MEDIA_BUS_FMT_RGB444_1X12:
> + return ATMEL_HLCDC_RGB444_OUTPUT;
> + case MEDIA_BUS_FMT_RGB565_1X16:
> + return ATMEL_HLCDC_RGB565_OUTPUT;
> + case MEDIA_BUS_FMT_RGB666_1X18:
> + return ATMEL_HLCDC_RGB666_OUTPUT;
> + case MEDIA_BUS_FMT_RGB888_1X24:
> + return ATMEL_HLCDC_RGB888_OUTPUT;
> + default:
> + return -EINVAL;
> }
> - }
>
> + for (j = 0; j < info->num_bus_formats; j++) {
> + switch (info->bus_formats[j]) {
> + case MEDIA_BUS_FMT_RGB444_1X12:
> + supported_fmts |= ATMEL_HLCDC_RGB444_OUTPUT;
> + break;
> + case MEDIA_BUS_FMT_RGB565_1X16:
> + supported_fmts |= ATMEL_HLCDC_RGB565_OUTPUT;
> + break;
> + case MEDIA_BUS_FMT_RGB666_1X18:
> + supported_fmts |= ATMEL_HLCDC_RGB666_OUTPUT;
> + break;
> + case MEDIA_BUS_FMT_RGB888_1X24:
> + supported_fmts |= ATMEL_HLCDC_RGB888_OUTPUT;
> + break;
> + default:
> + break;
> + }
> + }
> + }
> return supported_fmts;
> }
>
> static int atmel_hlcdc_crtc_select_output_mode(struct drm_crtc_state *state)
> {
> - unsigned int output_fmts = ATMEL_HLCDC_OUTPUT_MODE_MASK;
> + unsigned int output_fmts;
> struct atmel_hlcdc_crtc_state *hstate;
> struct drm_connector_state *cstate;
> struct drm_connector *connector;
> - struct atmel_hlcdc_crtc *crtc;
> + struct atmel_hlcdc_crtc *crtc = drm_crtc_to_atmel_hlcdc_crtc(state->crtc);
Previous code uses reverse christmass tree order for variable, thus, try to
keep it the same.
> int i;
> + bool is_xlcdc = crtc->dc->desc->is_xlcdc;
>
> - crtc = drm_crtc_to_atmel_hlcdc_crtc(state->crtc);
> + output_fmts = is_xlcdc ? ATMEL_XLCDC_OUTPUT_MODE_MASK :
> + ATMEL_HLCDC_OUTPUT_MODE_MASK;
>
> for_each_new_connector_in_state(state->state, connector, cstate, i) {
> unsigned int supported_fmts = 0;
> @@ -380,7 +433,7 @@ static int atmel_hlcdc_crtc_select_output_mode(struct drm_crtc_state *state)
>
> hstate = drm_crtc_state_to_atmel_hlcdc_crtc_state(state);
> hstate->output_mode = fls(output_fmts) - 1;
> - if (crtc->dc->desc->is_xlcdc) {
> + if (is_xlcdc) {
> /* check if MIPI DPI bit needs to be set */
> if (fls(output_fmts) > 3) {
> hstate->output_mode -= 4;