2024-01-30 11:16:33

by Sneh Shah

[permalink] [raw]
Subject: [PATCH net-next v3] net: stmmac: dwmac-qcom-ethqos: Add support for 2.5G SGMII

Serdes phy needs to operate at 2500 mode for 2.5G speed and 1000
mode for 1G/100M/10M speed.
Added changes to configure serdes phy and mac based on link speed.
Changing serdes phy speed involves multiple register writes for
serdes block. To avoid redundant write opertions only update serdes
phy when new speed is different.

Signed-off-by: Sneh Shah <[email protected]>
---
v3 changelog:
- updated commit message
---
v2 changelog:
- updated stmmac_pcs_ane to support autoneg disable
- Update serdes speed to 1000 for 100M and 10M also
---
.../stmicro/stmmac/dwmac-qcom-ethqos.c | 27 +++++++++++++++++++
.../net/ethernet/stmicro/stmmac/stmmac_pcs.h | 2 ++
2 files changed, 29 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index 31631e3f89d0..3ead32cd49a4 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -106,6 +106,7 @@ struct qcom_ethqos {
struct clk *link_clk;
struct phy *serdes_phy;
unsigned int speed;
+ int serdes_speed;
phy_interface_t phy_mode;

const struct ethqos_emac_por *por;
@@ -608,17 +609,38 @@ static int ethqos_configure_sgmii(struct qcom_ethqos *ethqos)
{
int val;

+ struct platform_device *pdev = ethqos->pdev;
+ struct net_device *dev = platform_get_drvdata(pdev);
+ struct stmmac_priv *priv = netdev_priv(dev);
val = readl(ethqos->mac_base + MAC_CTRL_REG);

switch (ethqos->speed) {
+ case SPEED_2500:
+ val &= ~ETHQOS_MAC_CTRL_PORT_SEL;
+ rgmii_updatel(ethqos, RGMII_CONFIG2_RGMII_CLK_SEL_CFG,
+ RGMII_CONFIG2_RGMII_CLK_SEL_CFG,
+ RGMII_IO_MACRO_CONFIG2);
+ if (ethqos->serdes_speed != SPEED_2500)
+ phy_set_speed(ethqos->serdes_phy, SPEED_2500);
+ ethqos->serdes_speed = SPEED_2500;
+ stmmac_pcs_ctrl_ane(priv, priv->ioaddr, 0, 0, 0);
+ break;
case SPEED_1000:
val &= ~ETHQOS_MAC_CTRL_PORT_SEL;
rgmii_updatel(ethqos, RGMII_CONFIG2_RGMII_CLK_SEL_CFG,
RGMII_CONFIG2_RGMII_CLK_SEL_CFG,
RGMII_IO_MACRO_CONFIG2);
+ if (ethqos->serdes_speed != SPEED_1000)
+ phy_set_speed(ethqos->serdes_phy, SPEED_1000);
+ ethqos->serdes_speed = SPEED_1000;
+ stmmac_pcs_ctrl_ane(priv, priv->ioaddr, 1, 0, 0);
break;
case SPEED_100:
val |= ETHQOS_MAC_CTRL_PORT_SEL | ETHQOS_MAC_CTRL_SPEED_MODE;
+ if (ethqos->serdes_speed != SPEED_1000)
+ phy_set_speed(ethqos->serdes_phy, SPEED_1000);
+ ethqos->serdes_speed = SPEED_1000;
+ stmmac_pcs_ctrl_ane(priv, priv->ioaddr, 1, 0, 0);
break;
case SPEED_10:
val |= ETHQOS_MAC_CTRL_PORT_SEL;
@@ -627,6 +649,10 @@ static int ethqos_configure_sgmii(struct qcom_ethqos *ethqos)
FIELD_PREP(RGMII_CONFIG_SGMII_CLK_DVDR,
SGMII_10M_RX_CLK_DVDR),
RGMII_IO_MACRO_CONFIG);
+ if (ethqos->serdes_speed != SPEED_1000)
+ phy_set_speed(ethqos->serdes_phy, ethqos->speed);
+ ethqos->serdes_speed = SPEED_1000;
+ stmmac_pcs_ctrl_ane(priv, priv->ioaddr, 1, 0, 0);
break;
}

@@ -799,6 +825,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
"Failed to get serdes phy\n");

ethqos->speed = SPEED_1000;
+ ethqos->serdes_speed = SPEED_1000;
ethqos_update_link_clk(ethqos, SPEED_1000);
ethqos_set_func_clk_en(ethqos);

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.h b/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.h
index aefc121464b5..13a30e6df4c1 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.h
@@ -110,6 +110,8 @@ static inline void dwmac_ctrl_ane(void __iomem *ioaddr, u32 reg, bool ane,
/* Enable and restart the Auto-Negotiation */
if (ane)
value |= GMAC_AN_CTRL_ANE | GMAC_AN_CTRL_RAN;
+ else
+ value &= ~GMAC_AN_CTRL_ANE;

/* In case of MAC-2-MAC connection, block is configured to operate
* according to MAC conf register.
--
2.17.1



2024-02-01 13:06:56

by Paolo Abeni

[permalink] [raw]
Subject: Re: [PATCH net-next v3] net: stmmac: dwmac-qcom-ethqos: Add support for 2.5G SGMII

On Tue, 2024-01-30 at 16:42 +0530, Sneh Shah wrote:
> @@ -608,17 +609,38 @@ static int ethqos_configure_sgmii(struct qcom_ethqos *ethqos)
> {
> int val;
>
> + struct platform_device *pdev = ethqos->pdev;
> + struct net_device *dev = platform_get_drvdata(pdev);
> + struct stmmac_priv *priv = netdev_priv(dev);
> val = readl(ethqos->mac_base + MAC_CTRL_REG);

I'm unsure why checkpatch did not catch the above, but you need to
remove the empty line in-between the local variables declaration and
you must insert an empty line between the last definition and the first
statement.

Please also reorder the variables to respect the reverse x-mas tree
order, something alike:

struct net_device *dev = platform_get_drvdata(ethqos->pdev);
struct stmmac_priv *priv = netdev_priv(dev);
int val;

val = readl(ethqos->mac_base + MAC_CTRL_REG);

..

Cheers,

Paolo



2024-02-02 17:48:02

by Simon Horman

[permalink] [raw]
Subject: Re: [PATCH net-next v3] net: stmmac: dwmac-qcom-ethqos: Add support for 2.5G SGMII

On Tue, Jan 30, 2024 at 04:42:34PM +0530, Sneh Shah wrote:
> Serdes phy needs to operate at 2500 mode for 2.5G speed and 1000
> mode for 1G/100M/10M speed.
> Added changes to configure serdes phy and mac based on link speed.
> Changing serdes phy speed involves multiple register writes for
> serdes block. To avoid redundant write opertions only update serdes
> phy when new speed is different.

nit: operations

..