Monolithic Power Systems, Inc. (MPS) synchronous step-down converter.
Signed-off-by: Charles Hsu <[email protected]>
---
Documentation/devicetree/bindings/trivial-devices.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index 79dcd92c4a43..088b23ed2ae6 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -129,6 +129,8 @@ properties:
- mps,mp2975
# Monolithic Power Systems Inc. multi-phase hot-swap controller mp5990
- mps,mp5990
+ # Monolithic Power Systems Inc. synchronous step-down converter mpq8785
+ - mps,mpq8785
# Honeywell Humidicon HIH-6130 humidity/temperature sensor
- honeywell,hi6130
# IBM Common Form Factor Power Supply Versions (all versions)
--
2.34.1
Add support for mpq8785 device from Monolithic Power Systems, Inc.
(MPS) vendor. This is synchronous step-down controller.
Signed-off-by: Charles Hsu <[email protected]>
---
Change in v1:
Initial patchset.
Change in v2:
1.Add pmbus support status registers.
2.Add mpq8785 in trivial-devices.yaml.
3.Remove format[PSC_VOLTAGE_OUT].
4.Fix MODULE_DESCRIPTION.
Change in v3:
1.Identify vout_mode.
2.Separate dt-binding.
Change in v4:
1.Return an error if reading VOUT_MODE fails.
---
Documentation/hwmon/index.rst | 1 +
Documentation/hwmon/mpq8785.rst | 94 +++++++++++++++++++++++++++++++++
drivers/hwmon/pmbus/Kconfig | 9 ++++
drivers/hwmon/pmbus/Makefile | 1 +
drivers/hwmon/pmbus/mpq8785.c | 89 +++++++++++++++++++++++++++++++
5 files changed, 194 insertions(+)
create mode 100644 Documentation/hwmon/mpq8785.rst
create mode 100644 drivers/hwmon/pmbus/mpq8785.c
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index c7ed1f73ac06..085ad6ca9b05 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -163,6 +163,7 @@ Hardware Monitoring Kernel Drivers
mp2975
mp5023
mp5990
+ mpq8785
nct6683
nct6775
nct7802
diff --git a/Documentation/hwmon/mpq8785.rst b/Documentation/hwmon/mpq8785.rst
new file mode 100644
index 000000000000..bf8176b87086
--- /dev/null
+++ b/Documentation/hwmon/mpq8785.rst
@@ -0,0 +1,94 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+Kernel driver mpq8785
+=======================
+
+Supported chips:
+
+ * MPS MPQ8785
+
+ Prefix: 'mpq8785'
+
+Author: Charles Hsu <[email protected]>
+
+Description
+-----------
+
+The MPQ8785 is a fully integrated, PMBus-compatible, high-frequency, synchronous
+buck converter. The MPQ8785 offers a very compact solution that achieves up to
+40A output current per phase, with excellent load and line regulation over a
+wide input supply range. The MPQ8785 operates at high efficiency over a wide
+output current load range.
+
+The PMBus interface provides converter configurations and key parameters
+monitoring.
+
+The MPQ8785 adopts MPS's proprietary multi-phase digital constant-on-time (MCOT)
+control, which provides fast transient response and eases loop stabilization.
+The MCOT scheme also allows multiple MPQ8785 devices to be connected in parallel
+with excellent current sharing and phase interleaving for high-current
+applications.
+
+Fully integrated protection features include over-current protection (OCP),
+over-voltage protection (OVP), under-voltage protection (UVP), and
+over-temperature protection (OTP).
+
+The MPQ8785 requires a minimal number of readily available, standard external
+components, and is available in a TLGA (5mmx6mm) package.
+
+Device compliant with:
+
+- PMBus rev 1.3 interface.
+
+The driver exports the following attributes via the 'sysfs' files
+for input voltage:
+
+**in1_input**
+
+**in1_label**
+
+**in1_max**
+
+**in1_max_alarm**
+
+**in1_min**
+
+**in1_min_alarm**
+
+**in1_crit**
+
+**in1_crit_alarm**
+
+The driver provides the following attributes for output voltage:
+
+**in2_input**
+
+**in2_label**
+
+**in2_alarm**
+
+The driver provides the following attributes for output current:
+
+**curr1_input**
+
+**curr1_label**
+
+**curr1_max**
+
+**curr1_max_alarm**
+
+**curr1_crit**
+
+**curr1_crit_alarm**
+
+The driver provides the following attributes for temperature:
+
+**temp1_input**
+
+**temp1_max**
+
+**temp1_max_alarm**
+
+**temp1_crit**
+
+**temp1_crit_alarm**
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index 294808f5240a..557ae0c414b0 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -377,6 +377,15 @@ config SENSORS_MPQ7932
This driver can also be built as a module. If so, the module will
be called mpq7932.
+config SENSORS_MPQ8785
+ tristate "MPS MPQ8785"
+ help
+ If you say yes here you get hardware monitoring functionality support
+ for power management IC MPS MPQ8785.
+
+ This driver can also be built as a module. If so, the module will
+ be called mpq8785.
+
config SENSORS_PIM4328
tristate "Flex PIM4328 and compatibles"
help
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
index cf8a76744545..f14ecf03ad77 100644
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -39,6 +39,7 @@ obj-$(CONFIG_SENSORS_MP2975) += mp2975.o
obj-$(CONFIG_SENSORS_MP5023) += mp5023.o
obj-$(CONFIG_SENSORS_MP5990) += mp5990.o
obj-$(CONFIG_SENSORS_MPQ7932) += mpq7932.o
+obj-$(CONFIG_SENSORS_MPQ8785) += mpq8785.o
obj-$(CONFIG_SENSORS_PLI1209BC) += pli1209bc.o
obj-$(CONFIG_SENSORS_PM6764TR) += pm6764tr.o
obj-$(CONFIG_SENSORS_PXE1610) += pxe1610.o
diff --git a/drivers/hwmon/pmbus/mpq8785.c b/drivers/hwmon/pmbus/mpq8785.c
new file mode 100644
index 000000000000..b9405dac7b09
--- /dev/null
+++ b/drivers/hwmon/pmbus/mpq8785.c
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for MPS MPQ8785 Step-Down Converter
+ */
+
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include "pmbus.h"
+
+static int mpq8785_identify(struct i2c_client *client,
+ struct pmbus_driver_info *info)
+{
+ int vout_mode;
+
+ vout_mode = pmbus_read_byte_data(client, 0, PMBUS_VOUT_MODE);
+ if (vout_mode < 0 || vout_mode == 0xff)
+ return vout_mode < 0 ? vout_mode : -ENODEV;
+ switch (vout_mode >> 5) {
+ case 0:
+ info->format[PSC_VOLTAGE_OUT] = linear;
+ break;
+ case 1:
+ case 2:
+ info->format[PSC_VOLTAGE_OUT] = direct,
+ info->m[PSC_VOLTAGE_OUT] = 64;
+ info->b[PSC_VOLTAGE_OUT] = 0;
+ info->R[PSC_VOLTAGE_OUT] = 1;
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ return 0;
+};
+
+static struct pmbus_driver_info mpq8785_info = {
+ .pages = 1,
+ .format[PSC_VOLTAGE_IN] = direct,
+ .format[PSC_CURRENT_OUT] = direct,
+ .format[PSC_TEMPERATURE] = direct,
+ .m[PSC_VOLTAGE_IN] = 4,
+ .b[PSC_VOLTAGE_IN] = 0,
+ .R[PSC_VOLTAGE_IN] = 1,
+ .m[PSC_CURRENT_OUT] = 16,
+ .b[PSC_CURRENT_OUT] = 0,
+ .R[PSC_CURRENT_OUT] = 0,
+ .m[PSC_TEMPERATURE] = 1,
+ .b[PSC_TEMPERATURE] = 0,
+ .R[PSC_TEMPERATURE] = 0,
+ .func[0] =
+ PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT |
+ PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+ PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+ PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .identify = mpq8785_identify,
+};
+
+static int mpq8785_probe(struct i2c_client *client)
+{
+ return pmbus_do_probe(client, &mpq8785_info);
+};
+
+static const struct i2c_device_id mpq8785_id[] = {
+ { "mpq8785", 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, mpq8785_id);
+
+static const struct of_device_id __maybe_unused mpq8785_of_match[] = {
+ { .compatible = "mps,mpq8785" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, mpq8785_of_match);
+
+static struct i2c_driver mpq8785_driver = {
+ .driver = {
+ .name = "mpq8785",
+ .of_match_table = of_match_ptr(mpq8785_of_match),
+ },
+ .probe_new = mpq8785_probe,
+ .id_table = mpq8785_id,
+};
+
+module_i2c_driver(mpq8785_driver);
+
+MODULE_AUTHOR("Charles Hsu <[email protected]>");
+MODULE_DESCRIPTION("PMBus driver for MPS MPQ8785");
+MODULE_LICENSE("GPL");
--
2.34.1
On 31/01/2024 08:48, Charles Hsu wrote:
> Monolithic Power Systems, Inc. (MPS) synchronous step-down converter.
>
> Signed-off-by: Charles Hsu <[email protected]>
> ---
> Documentation/devicetree/bindings/trivial-devices.yaml | 2 ++
> 1 file changed, 2 insertions(+)
Acked-by: Krzysztof Kozlowski <[email protected]>
---
This is an automated instruction, just in case, because many review tags
are being ignored. If you know the process, you can skip it (please do
not feel offended by me posting it here - no bad intentions intended).
If you do not know the process, here is a short explanation:
Please add Acked-by/Reviewed-by/Tested-by tags when posting new
versions, under or above your Signed-off-by tag. Tag is "received", when
provided in a message replied to you on the mailing list. Tools like b4
can help here. However, there's no need to repost patches *only* to add
the tags. The upstream maintainer will do that for tags received on the
version they apply.
https://elixir.bootlin.com/linux/v6.5-rc3/source/Documentation/process/submitting-patches.rst#L577
Best regards,
Krzysztof
On Wed, Jan 31, 2024 at 03:48:22PM +0800, Charles Hsu wrote:
> Add support for mpq8785 device from Monolithic Power Systems, Inc.
> (MPS) vendor. This is synchronous step-down controller.
>
> Signed-off-by: Charles Hsu <[email protected]>
Applied.
Thanks,
Guenter
On Wed, Jan 31, 2024 at 03:48:21PM +0800, Charles Hsu wrote:
> Monolithic Power Systems, Inc. (MPS) synchronous step-down converter.
>
> Signed-off-by: Charles Hsu <[email protected]>
> Acked-by: Krzysztof Kozlowski <[email protected]>
Applied.
Thanks,
Guenter