The board-specific (electrical) configuration was removed from PM660L in
90ba636e40cb ("arm64: dts: qcom: pm660l: Remove board-specific WLED
configuration") as it is platform-dependent. We reintroduce it here in
the Nile board configuration (with a slightly lower current limit, as
per downstream DT sources) and enable it for use in the dsi0 node.
Signed-off-by: Marijn Suijten <[email protected]>
---
arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
index 87d0293c728d..852aecfba95a 100644
--- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
@@ -241,6 +241,16 @@ led@3 {
};
};
+&pm660l_wled {
+ status = "okay";
+
+ qcom,switching-freq = <800>;
+ qcom,ovp-millivolt = <29600>;
+ qcom,current-boost-limit = <970>;
+ qcom,current-limit-microamp = <17500>;
+ qcom,num-strings = <2>;
+};
+
&pon_pwrkey {
status = "okay";
};
---
base-commit: 01af33cc9894b4489fb68fa35c40e9fe85df63dc
change-id: 20240204-sdm630-nile-wled-e23d7a1df0ce
Best regards,
--
Marijn Suijten <[email protected]>
On Sun, 04 Feb 2024 18:35:22 +0100, Marijn Suijten wrote:
> The board-specific (electrical) configuration was removed from PM660L in
> 90ba636e40cb ("arm64: dts: qcom: pm660l: Remove board-specific WLED
> configuration") as it is platform-dependent. We reintroduce it here in
> the Nile board configuration (with a slightly lower current limit, as
> per downstream DT sources) and enable it for use in the dsi0 node.
>
>
> [...]
Applied, thanks!
[1/1] arm64: dts: qcom: sdm630-nile: Enable and configure PM660L WLED
commit: 749c47ad3383f344ab080ccb1905e10b2470d70f
Best regards,
--
Bjorn Andersson <[email protected]>