The tps659413 node set WKUP_GPIO0_83 (AA37) pin as input to be used as
PMIC interrupt but uses 39 (WKUP_GPIO0_39) as "interrupts" property.
Replace 39 by 83 after checking in the board schematic [1].
[1] https://www.ti.com/tool/SK-AM69
Fixes: 865a1593bf99 ("arm64: dts: ti: k3-am69-sk: Add support for TPS6594 PMIC")
Cc: Neha Malcom Francis <[email protected]>
Signed-off-by: Romain Naour <[email protected]>
---
arch/arm64/boot/dts/ti/k3-am69-sk.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
index 8da591579868..95c9d3da59d3 100644
--- a/arch/arm64/boot/dts/ti/k3-am69-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
@@ -646,7 +646,7 @@ tps659413: pmic@48 {
pinctrl-names = "default";
pinctrl-0 = <&pmic_irq_pins_default>;
interrupt-parent = <&wkup_gpio0>;
- interrupts = <39 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <83 IRQ_TYPE_EDGE_FALLING>;
gpio-controller;
#gpio-cells = <2>;
ti,primary-pmic;
--
2.43.0