The original series submitted to 6.7 (before revert) is modified to
solve regression issues on several platforms. There are two changes
introduced before adding support for new features to allow dynamic
addition of channels.
v5:
Change als_scan_mask to per state instead of global
v4:
Addressed comments from Jonathan and Basavaraj
v3:
Addressed comments for v2, details in each patch.
v2:
New change to add channels dynamically
Modified color temperature and chromaticity to skip in case
of failures
Basavaraj Natikar (2):
iio: hid-sensor-als: Add light color temperature support
iio: hid-sensor-als: Add light chromaticity support
Srinivas Pandruvada (2):
iio: hid-sensor-als: Assign channels dynamically
iio: hid-sensor-als: Remove hardcoding of values for enums
drivers/iio/light/hid-sensor-als.c | 122 ++++++++++++++++++++++++-----
include/linux/hid-sensor-ids.h | 4 +
2 files changed, 108 insertions(+), 18 deletions(-)
--
2.43.0
Instead of assuming that every channel defined statically by
als_channels[] is present, assign dynamically based on presence of the
respective usage id in the descriptor. This will allow to register ALS
with limited channel support. Append the timestamp as the last channel.
Update available_scan_mask to specify all channels which are present.
There is no intentional function changes done.
Signed-off-by: Srinivas Pandruvada <[email protected]>
---
v5:
- Move als_scan_mask to struct als_state
v4:
Addressed comments from Jonthan:
- Use available_scan_masks
- timestamp location is fixed and left gaps in sample data for absent channels
- Use CHANNEL_SCAN_INDEX_MAX as limit to check presence of usage ids, otherwise
it will miss newer channels added in subsequent patches.
v3:
Addressed comments from Jonthan:
- Remove channel allocation and move to iio_priv()
- Parse all usage IDs in a single loop and continue
for failure. This way the temperature and chromaticity
will not need any special processing to parse usage ids.
- Don't leave empty channel indexes
v2:
New change
drivers/iio/light/hid-sensor-als.c | 51 ++++++++++++++++++++----------
1 file changed, 35 insertions(+), 16 deletions(-)
diff --git a/drivers/iio/light/hid-sensor-als.c b/drivers/iio/light/hid-sensor-als.c
index b6c4bef2a7bb..ed5c42aa7cca 100644
--- a/drivers/iio/light/hid-sensor-als.c
+++ b/drivers/iio/light/hid-sensor-als.c
@@ -25,6 +25,7 @@ struct als_state {
struct hid_sensor_hub_callbacks callbacks;
struct hid_sensor_common common_attributes;
struct hid_sensor_hub_attribute_info als[CHANNEL_SCAN_INDEX_MAX];
+ struct iio_chan_spec channels[CHANNEL_SCAN_INDEX_MAX + 1];
struct {
u32 illum[CHANNEL_SCAN_INDEX_MAX];
u64 timestamp __aligned(8);
@@ -33,7 +34,15 @@ struct als_state {
int scale_post_decml;
int scale_precision;
int value_offset;
+ int num_channels;
s64 timestamp;
+ unsigned long als_scan_mask[2];
+};
+
+/* The order of usage ids must match scan index starting from CHANNEL_SCAN_INDEX_INTENSITY */
+static const u32 als_usage_ids[] = {
+ HID_USAGE_SENSOR_LIGHT_ILLUM,
+ HID_USAGE_SENSOR_LIGHT_ILLUM,
};
static const u32 als_sensitivity_addresses[] = {
@@ -238,27 +247,38 @@ static int als_capture_sample(struct hid_sensor_hub_device *hsdev,
/* Parse report which is specific to an usage id*/
static int als_parse_report(struct platform_device *pdev,
struct hid_sensor_hub_device *hsdev,
- struct iio_chan_spec *channels,
unsigned usage_id,
struct als_state *st)
{
- int ret;
+ struct iio_chan_spec *channels;
+ int ret, index = 0;
int i;
- for (i = 0; i <= CHANNEL_SCAN_INDEX_ILLUM; ++i) {
+ channels = st->channels;
+
+ for (i = 0; i < CHANNEL_SCAN_INDEX_MAX; ++i) {
ret = sensor_hub_input_get_attribute_info(hsdev,
HID_INPUT_REPORT,
usage_id,
- HID_USAGE_SENSOR_LIGHT_ILLUM,
+ als_usage_ids[i],
&st->als[i]);
if (ret < 0)
- return ret;
- als_adjust_channel_bit_mask(channels, i, st->als[i].size);
+ continue;
+
+ channels[index] = als_channels[i];
+ st->als_scan_mask[0] |= BIT(i);
+ als_adjust_channel_bit_mask(channels, index, st->als[i].size);
+ ++index;
dev_dbg(&pdev->dev, "als %x:%x\n", st->als[i].index,
st->als[i].report_id);
}
+ st->num_channels = index;
+ /* Return success even if one usage id is present */
+ if (index)
+ ret = 0;
+
st->scale_precision = hid_sensor_format_scale(usage_id,
&st->als[CHANNEL_SCAN_INDEX_INTENSITY],
&st->scale_pre_decml, &st->scale_post_decml);
@@ -294,15 +314,7 @@ static int hid_als_probe(struct platform_device *pdev)
return ret;
}
- indio_dev->channels = devm_kmemdup(&pdev->dev, als_channels,
- sizeof(als_channels), GFP_KERNEL);
- if (!indio_dev->channels) {
- dev_err(&pdev->dev, "failed to duplicate channels\n");
- return -ENOMEM;
- }
-
ret = als_parse_report(pdev, hsdev,
- (struct iio_chan_spec *)indio_dev->channels,
hsdev->usage,
als_state);
if (ret) {
@@ -310,8 +322,15 @@ static int hid_als_probe(struct platform_device *pdev)
return ret;
}
- indio_dev->num_channels =
- ARRAY_SIZE(als_channels);
+ /* Add timestamp channel */
+ als_state->channels[als_state->num_channels] = als_channels[CHANNEL_SCAN_INDEX_TIMESTAMP];
+
+ /* +1 for adding timestamp channel */
+ indio_dev->num_channels = als_state->num_channels + 1;
+
+ indio_dev->channels = als_state->channels;
+ indio_dev->available_scan_masks = als_state->als_scan_mask;
+
indio_dev->info = &als_info;
indio_dev->name = name;
indio_dev->modes = INDIO_DIRECT_MODE;
--
2.43.0
Remove hardcoding of values for enum CHANNEL_SCAN_INDEX_INTENSITY and
CHANNEL_SCAN_INDEX_ILLUM.
Signed-off-by: Srinivas Pandruvada <[email protected]>
---
v5:
No change
v4:
NO change
v3:
New patch. Added as the next patch removed the hardcoding of enum values
when submitted. To remove unrelated changes, created a patch to just
remove hardcoding of values.
drivers/iio/light/hid-sensor-als.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/iio/light/hid-sensor-als.c b/drivers/iio/light/hid-sensor-als.c
index ed5c42aa7cca..144c02fbbbc0 100644
--- a/drivers/iio/light/hid-sensor-als.c
+++ b/drivers/iio/light/hid-sensor-als.c
@@ -14,8 +14,8 @@
#include "../common/hid-sensors/hid-sensor-trigger.h"
enum {
- CHANNEL_SCAN_INDEX_INTENSITY = 0,
- CHANNEL_SCAN_INDEX_ILLUM = 1,
+ CHANNEL_SCAN_INDEX_INTENSITY,
+ CHANNEL_SCAN_INDEX_ILLUM,
CHANNEL_SCAN_INDEX_MAX
};
--
2.43.0
From: Basavaraj Natikar <[email protected]>
On some platforms, ambient color sensors also support light color
temperature. Add support of light color temperature.
Signed-off-by: Basavaraj Natikar <[email protected]>
Signed-off-by: Srinivas Pandruvada <[email protected]>
---
v5:
No change
v4:
- Index is fixed for each channel instead of packing for absent channels
v3:
Simplilified as no special processing is required in als_parse_report()
v2:
Original patch from Basavaraj Natikar <[email protected]> is
modified to prevent failure when the new usage id is not found in the
descriptor.
drivers/iio/light/hid-sensor-als.c | 21 +++++++++++++++++++++
include/linux/hid-sensor-ids.h | 1 +
2 files changed, 22 insertions(+)
diff --git a/drivers/iio/light/hid-sensor-als.c b/drivers/iio/light/hid-sensor-als.c
index 144c02fbbbc0..c17902823629 100644
--- a/drivers/iio/light/hid-sensor-als.c
+++ b/drivers/iio/light/hid-sensor-als.c
@@ -16,6 +16,7 @@
enum {
CHANNEL_SCAN_INDEX_INTENSITY,
CHANNEL_SCAN_INDEX_ILLUM,
+ CHANNEL_SCAN_INDEX_COLOR_TEMP,
CHANNEL_SCAN_INDEX_MAX
};
@@ -43,6 +44,7 @@ struct als_state {
static const u32 als_usage_ids[] = {
HID_USAGE_SENSOR_LIGHT_ILLUM,
HID_USAGE_SENSOR_LIGHT_ILLUM,
+ HID_USAGE_SENSOR_LIGHT_COLOR_TEMPERATURE,
};
static const u32 als_sensitivity_addresses[] = {
@@ -74,6 +76,16 @@ static const struct iio_chan_spec als_channels[] = {
BIT(IIO_CHAN_INFO_HYSTERESIS_RELATIVE),
.scan_index = CHANNEL_SCAN_INDEX_ILLUM,
},
+ {
+ .type = IIO_COLORTEMP,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
+ BIT(IIO_CHAN_INFO_SCALE) |
+ BIT(IIO_CHAN_INFO_SAMP_FREQ) |
+ BIT(IIO_CHAN_INFO_HYSTERESIS) |
+ BIT(IIO_CHAN_INFO_HYSTERESIS_RELATIVE),
+ .scan_index = CHANNEL_SCAN_INDEX_COLOR_TEMP,
+ },
IIO_CHAN_SOFT_TIMESTAMP(CHANNEL_SCAN_INDEX_TIMESTAMP)
};
@@ -112,6 +124,11 @@ static int als_read_raw(struct iio_dev *indio_dev,
min = als_state->als[chan->scan_index].logical_minimum;
address = HID_USAGE_SENSOR_LIGHT_ILLUM;
break;
+ case CHANNEL_SCAN_INDEX_COLOR_TEMP:
+ report_id = als_state->als[chan->scan_index].report_id;
+ min = als_state->als[chan->scan_index].logical_minimum;
+ address = HID_USAGE_SENSOR_LIGHT_COLOR_TEMPERATURE;
+ break;
default:
report_id = -1;
break;
@@ -232,6 +249,10 @@ static int als_capture_sample(struct hid_sensor_hub_device *hsdev,
als_state->scan.illum[CHANNEL_SCAN_INDEX_ILLUM] = sample_data;
ret = 0;
break;
+ case HID_USAGE_SENSOR_LIGHT_COLOR_TEMPERATURE:
+ als_state->scan.illum[CHANNEL_SCAN_INDEX_COLOR_TEMP] = sample_data;
+ ret = 0;
+ break;
case HID_USAGE_SENSOR_TIME_TIMESTAMP:
als_state->timestamp = hid_sensor_convert_timestamp(&als_state->common_attributes,
*(s64 *)raw_data);
diff --git a/include/linux/hid-sensor-ids.h b/include/linux/hid-sensor-ids.h
index 13b1e65fbdcc..8af4fb3e0254 100644
--- a/include/linux/hid-sensor-ids.h
+++ b/include/linux/hid-sensor-ids.h
@@ -21,6 +21,7 @@
#define HID_USAGE_SENSOR_ALS 0x200041
#define HID_USAGE_SENSOR_DATA_LIGHT 0x2004d0
#define HID_USAGE_SENSOR_LIGHT_ILLUM 0x2004d1
+#define HID_USAGE_SENSOR_LIGHT_COLOR_TEMPERATURE 0x2004d2
/* PROX (200011) */
#define HID_USAGE_SENSOR_PROX 0x200011
--
2.43.0
From: Basavaraj Natikar <[email protected]>
On some platforms, ambient color sensors also support the x and y light
colors, which represent the coordinates on the CIE 1931 chromaticity
diagram. Add light chromaticity x and y.
Signed-off-by: Basavaraj Natikar <[email protected]>
Signed-off-by: Srinivas Pandruvada <[email protected]>
---
v5:
No change
v4:
- Index is fixed for each channel instead of packing for absent channels
v3:
Simplilified as no special processing is required in als_parse_report()
v2:
Original patch from Basavaraj Natikar <[email protected]> is
modified to prevent failure when the new usage id is not found in the
descriptor.
drivers/iio/light/hid-sensor-als.c | 46 ++++++++++++++++++++++++++++++
include/linux/hid-sensor-ids.h | 3 ++
2 files changed, 49 insertions(+)
diff --git a/drivers/iio/light/hid-sensor-als.c b/drivers/iio/light/hid-sensor-als.c
index c17902823629..260281194f61 100644
--- a/drivers/iio/light/hid-sensor-als.c
+++ b/drivers/iio/light/hid-sensor-als.c
@@ -17,6 +17,8 @@ enum {
CHANNEL_SCAN_INDEX_INTENSITY,
CHANNEL_SCAN_INDEX_ILLUM,
CHANNEL_SCAN_INDEX_COLOR_TEMP,
+ CHANNEL_SCAN_INDEX_CHROMATICITY_X,
+ CHANNEL_SCAN_INDEX_CHROMATICITY_Y,
CHANNEL_SCAN_INDEX_MAX
};
@@ -45,6 +47,8 @@ static const u32 als_usage_ids[] = {
HID_USAGE_SENSOR_LIGHT_ILLUM,
HID_USAGE_SENSOR_LIGHT_ILLUM,
HID_USAGE_SENSOR_LIGHT_COLOR_TEMPERATURE,
+ HID_USAGE_SENSOR_LIGHT_CHROMATICITY_X,
+ HID_USAGE_SENSOR_LIGHT_CHROMATICITY_Y,
};
static const u32 als_sensitivity_addresses[] = {
@@ -86,6 +90,30 @@ static const struct iio_chan_spec als_channels[] = {
BIT(IIO_CHAN_INFO_HYSTERESIS_RELATIVE),
.scan_index = CHANNEL_SCAN_INDEX_COLOR_TEMP,
},
+ {
+ .type = IIO_CHROMATICITY,
+ .modified = 1,
+ .channel2 = IIO_MOD_X,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
+ BIT(IIO_CHAN_INFO_SCALE) |
+ BIT(IIO_CHAN_INFO_SAMP_FREQ) |
+ BIT(IIO_CHAN_INFO_HYSTERESIS) |
+ BIT(IIO_CHAN_INFO_HYSTERESIS_RELATIVE),
+ .scan_index = CHANNEL_SCAN_INDEX_CHROMATICITY_X,
+ },
+ {
+ .type = IIO_CHROMATICITY,
+ .modified = 1,
+ .channel2 = IIO_MOD_Y,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
+ BIT(IIO_CHAN_INFO_SCALE) |
+ BIT(IIO_CHAN_INFO_SAMP_FREQ) |
+ BIT(IIO_CHAN_INFO_HYSTERESIS) |
+ BIT(IIO_CHAN_INFO_HYSTERESIS_RELATIVE),
+ .scan_index = CHANNEL_SCAN_INDEX_CHROMATICITY_Y,
+ },
IIO_CHAN_SOFT_TIMESTAMP(CHANNEL_SCAN_INDEX_TIMESTAMP)
};
@@ -129,6 +157,16 @@ static int als_read_raw(struct iio_dev *indio_dev,
min = als_state->als[chan->scan_index].logical_minimum;
address = HID_USAGE_SENSOR_LIGHT_COLOR_TEMPERATURE;
break;
+ case CHANNEL_SCAN_INDEX_CHROMATICITY_X:
+ report_id = als_state->als[chan->scan_index].report_id;
+ min = als_state->als[chan->scan_index].logical_minimum;
+ address = HID_USAGE_SENSOR_LIGHT_CHROMATICITY_X;
+ break;
+ case CHANNEL_SCAN_INDEX_CHROMATICITY_Y:
+ report_id = als_state->als[chan->scan_index].report_id;
+ min = als_state->als[chan->scan_index].logical_minimum;
+ address = HID_USAGE_SENSOR_LIGHT_CHROMATICITY_Y;
+ break;
default:
report_id = -1;
break;
@@ -253,6 +291,14 @@ static int als_capture_sample(struct hid_sensor_hub_device *hsdev,
als_state->scan.illum[CHANNEL_SCAN_INDEX_COLOR_TEMP] = sample_data;
ret = 0;
break;
+ case HID_USAGE_SENSOR_LIGHT_CHROMATICITY_X:
+ als_state->scan.illum[CHANNEL_SCAN_INDEX_CHROMATICITY_X] = sample_data;
+ ret = 0;
+ break;
+ case HID_USAGE_SENSOR_LIGHT_CHROMATICITY_Y:
+ als_state->scan.illum[CHANNEL_SCAN_INDEX_CHROMATICITY_Y] = sample_data;
+ ret = 0;
+ break;
case HID_USAGE_SENSOR_TIME_TIMESTAMP:
als_state->timestamp = hid_sensor_convert_timestamp(&als_state->common_attributes,
*(s64 *)raw_data);
diff --git a/include/linux/hid-sensor-ids.h b/include/linux/hid-sensor-ids.h
index 8af4fb3e0254..6730ee900ee1 100644
--- a/include/linux/hid-sensor-ids.h
+++ b/include/linux/hid-sensor-ids.h
@@ -22,6 +22,9 @@
#define HID_USAGE_SENSOR_DATA_LIGHT 0x2004d0
#define HID_USAGE_SENSOR_LIGHT_ILLUM 0x2004d1
#define HID_USAGE_SENSOR_LIGHT_COLOR_TEMPERATURE 0x2004d2
+#define HID_USAGE_SENSOR_LIGHT_CHROMATICITY 0x2004d3
+#define HID_USAGE_SENSOR_LIGHT_CHROMATICITY_X 0x2004d4
+#define HID_USAGE_SENSOR_LIGHT_CHROMATICITY_Y 0x2004d5
/* PROX (200011) */
#define HID_USAGE_SENSOR_PROX 0x200011
--
2.43.0
On Mon, 5 Feb 2024 10:59:22 -0800
Srinivas Pandruvada <[email protected]> wrote:
> The original series submitted to 6.7 (before revert) is modified to
> solve regression issues on several platforms. There are two changes
> introduced before adding support for new features to allow dynamic
> addition of channels.
Applied and pushed out as testing for all the normal reasons (0-day
gets to play with it!)
Thanks,
Jonathan
>
> v5:
> Change als_scan_mask to per state instead of global
> v4:
> Addressed comments from Jonathan and Basavaraj
> v3:
> Addressed comments for v2, details in each patch.
> v2:
> New change to add channels dynamically
> Modified color temperature and chromaticity to skip in case
> of failures
>
>
> Basavaraj Natikar (2):
> iio: hid-sensor-als: Add light color temperature support
> iio: hid-sensor-als: Add light chromaticity support
>
> Srinivas Pandruvada (2):
> iio: hid-sensor-als: Assign channels dynamically
> iio: hid-sensor-als: Remove hardcoding of values for enums
>
> drivers/iio/light/hid-sensor-als.c | 122 ++++++++++++++++++++++++-----
> include/linux/hid-sensor-ids.h | 4 +
> 2 files changed, 108 insertions(+), 18 deletions(-)
>