Add QCA8075 PHY Package nodes. The PHY nodes that were previously
defined never worked and actually never had a driver to correctly setup
these PHY. Now that we have a correct driver, correctly add the PHY
Package node and set the default value of 300mw for tx driver strength
following specification of ipq4019 SoC.
Signed-off-by: Christian Marangi <[email protected]>
---
arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi | 35 +++++++++++++++---------
1 file changed, 22 insertions(+), 13 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
index f989bd741cd1..6c97d852d342 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
@@ -603,24 +603,33 @@ mdio: mdio@90000 {
reg = <0x90000 0x64>;
status = "disabled";
- ethphy0: ethernet-phy@0 {
+ ethernet-phy-package@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "qcom,qca8075-package";
reg = <0>;
- };
- ethphy1: ethernet-phy@1 {
- reg = <1>;
- };
+ qcom,tx-drive-strength-milliwatt = <300>;
- ethphy2: ethernet-phy@2 {
- reg = <2>;
- };
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
- ethphy3: ethernet-phy@3 {
- reg = <3>;
- };
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ ethphy2: ethernet-phy@2 {
+ reg = <2>;
+ };
+
+ ethphy3: ethernet-phy@3 {
+ reg = <3>;
+ };
- ethphy4: ethernet-phy@4 {
- reg = <4>;
+ ethphy4: ethernet-phy@4 {
+ reg = <4>;
+ };
};
};
--
2.43.0
On 11.02.2024 21:26, Christian Marangi wrote:
> Add QCA8075 PHY Package nodes. The PHY nodes that were previously
> defined never worked and actually never had a driver to correctly setup
> these PHY.
Missing Fixes tag?
Also, could you please give me a link to the series that fixed this
on the kernel side?
Konrad
On 12. 02. 2024. 12:05, Konrad Dybcio wrote:
> On 11.02.2024 21:26, Christian Marangi wrote:
>> Add QCA8075 PHY Package nodes. The PHY nodes that were previously
>> defined never worked and actually never had a driver to correctly setup
>> these PHY.
> Missing Fixes tag?
>
> Also, could you please give me a link to the series that fixed this
> on the kernel side?
Hi Konrad,
Support for this PHY and PHY package concept was added in:
https://patchwork.kernel.org/project/netdevbpf/cover/[email protected]/
Series has been merged couple of days ago so its in linux-next already.
Regards,
Robert
>
> Konrad
On Sun, 11 Feb 2024 21:26:55 +0100, Christian Marangi wrote:
> Add QCA8075 PHY Package nodes. The PHY nodes that were previously
> defined never worked and actually never had a driver to correctly setup
> these PHY. Now that we have a correct driver, correctly add the PHY
> Package node and set the default value of 300mw for tx driver strength
> following specification of ipq4019 SoC.
>
>
> [...]
Applied, thanks!
[1/1] ARM: dts: qcom: ipq4019: add QCA8075 PHY Package nodes
commit: 2338f4315f16b937e924ff679b91bb8c0ab53f25
Best regards,
--
Bjorn Andersson <[email protected]>