2024-02-11 23:31:19

by Adam Ford

[permalink] [raw]
Subject: [PATCH] arm64: dts: imx8mn-beacon: Remove unnecessary clock configuration

Since commit 8208181fe536 ("clk: imx: composite-8m:
Add imx8m_divider_determine_rate") the lcdif controller has
had the ability to set the disp_pixel_clk rate which propagates
up the tree and sets the video_pll rate automatically.

As such, there is no need to define it in the board file.

Signed-off-by: Adam Ford <[email protected]>

diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts
index 35b8d2060cd9..bbd80896db96 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts
@@ -99,8 +99,6 @@ adv7535_out: endpoint {
};

&lcdif {
- assigned-clocks = <&clk IMX8MN_VIDEO_PLL1>;
- assigned-clock-rates = <594000000>;
status = "okay";
};

--
2.43.0



2024-02-25 03:23:59

by Shawn Guo

[permalink] [raw]
Subject: Re: [PATCH] arm64: dts: imx8mn-beacon: Remove unnecessary clock configuration

On Sun, Feb 11, 2024 at 05:18:02PM -0600, Adam Ford wrote:
> Since commit 8208181fe536 ("clk: imx: composite-8m:
> Add imx8m_divider_determine_rate") the lcdif controller has
> had the ability to set the disp_pixel_clk rate which propagates
> up the tree and sets the video_pll rate automatically.
>
> As such, there is no need to define it in the board file.
>
> Signed-off-by: Adam Ford <[email protected]>

Applied, thanks!