Add device tree binding document for Rockchip USBDP Combo PHY
with Samsung IP block.
Co-developed-by: Frank Wang <[email protected]>
Signed-off-by: Frank Wang <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
---
.../bindings/phy/phy-rockchip-usbdp.yaml | 169 ++++++++++++++++++
1 file changed, 169 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml
diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml
new file mode 100644
index 000000000000..4ac1825144d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml
@@ -0,0 +1,169 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/phy-rockchip-usbdp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip USBDP Combo PHY with Samsung IP block
+
+maintainers:
+ - Frank Wang <[email protected]>
+ - Zhang Yubing <[email protected]>
+
+properties:
+ compatible:
+ enum:
+ - rockchip,rk3588-usbdp-phy
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 4
+
+ clock-names:
+ items:
+ - const: refclk
+ - const: immortal
+ - const: pclk
+ - const: utmi
+
+ resets:
+ maxItems: 5
+
+ reset-names:
+ items:
+ - const: init
+ - const: cmn
+ - const: lane
+ - const: pcs_apb
+ - const: pma_apb
+
+ rockchip,dp-lane-mux:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 2
+ maxItems: 4
+ description:
+ An array of physical Type-C lanes indexes. Position of an entry
+ determines the DisplayPort (DP) lane index, while the value of an entry
+ indicates physical Type-C lane. The supported DP lanes number are 2 or 4.
+ e.g. for 2 lanes DP lanes map, we could have "rockchip,dp-lane-mux = <2,
+ 3>;", assuming DP lane0 on Type-C phy lane2, DP lane1 on Type-C phy
+ lane3. For 4 lanes DP lanes map, we could have "rockchip,dp-lane-mux =
+ <0, 1, 2, 3>;", assuming DP lane0 on Type-C phy lane0, DP lane1 on Type-C
+ phy lane1, DP lane2 on Type-C phy lane2, DP lane3 on Type-C phy lane3. If
+ DP lane map by DisplayPort Alt mode, this property is not need.
+
+ rockchip,u2phy-grf:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to the syscon managing the 'usb2 phy general register files'.
+
+ rockchip,usb-grf:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to the syscon managing the 'usb general register files'.
+
+ rockchip,usbdpphy-grf:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to the syscon managing the 'usbdp phy general register files'.
+
+ rockchip,vo-grf:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to the syscon managing the 'video output general register files'.
+ When select the DP lane mapping will request its phandle.
+
+ sbu1-dc-gpios:
+ description:
+ GPIO connected to the SBU1 line of the USB-C connector via a big resistor
+ (~100K) to apply a DC offset for signalling the connector orientation.
+ maxItems: 1
+
+ sbu2-dc-gpios:
+ description:
+ GPIO connected to the SBU2 line of the USB-C connector via a big resistor
+ (~100K) to apply a DC offset for signalling the connector orientation.
+ maxItems: 1
+
+ orientation-switch:
+ description: Flag the port as possible handler of orientation switching
+ type: boolean
+
+ mode-switch:
+ description: Flag the port as possible handler of altmode switching
+ type: boolean
+
+ dp-port:
+ type: object
+ additionalProperties: false
+
+ properties:
+ "#phy-cells":
+ const: 0
+
+ required:
+ - "#phy-cells"
+
+ usb3-port:
+ type: object
+ additionalProperties: false
+
+ properties:
+ "#phy-cells":
+ const: 0
+
+ required:
+ - "#phy-cells"
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ A port node to link the PHY to a TypeC controller for the purpose of
+ handling orientation switching.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - dp-port
+ - usb3-port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/rockchip,rk3588-cru.h>
+ #include <dt-bindings/reset/rockchip,rk3588-cru.h>
+
+ usbdp_phy0: phy@fed80000 {
+ compatible = "rockchip,rk3588-usbdp-phy";
+ reg = <0xfed80000 0x10000>;
+ clocks = <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>,
+ <&cru CLK_USBDP_PHY0_IMMORTAL>,
+ <&cru PCLK_USBDPPHY0>,
+ <&u2phy0>;
+ clock-names = "refclk", "immortal", "pclk", "utmi";
+ resets = <&cru SRST_USBDP_COMBO_PHY0_INIT>,
+ <&cru SRST_USBDP_COMBO_PHY0_CMN>,
+ <&cru SRST_USBDP_COMBO_PHY0_LANE>,
+ <&cru SRST_USBDP_COMBO_PHY0_PCS>,
+ <&cru SRST_P_USBDPPHY0>;
+ reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb";
+ rockchip,u2phy-grf = <&usb2phy0_grf>;
+ rockchip,usb-grf = <&usb_grf>;
+ rockchip,usbdpphy-grf = <&usbdpphy0_grf>;
+ rockchip,vo-grf = <&vo0_grf>;
+
+ usbdp_phy0_dp: dp-port {
+ #phy-cells = <0>;
+ };
+
+ usbdp_phy0_u3: usb3-port {
+ #phy-cells = <0>;
+ };
+ };
--
2.43.0
On Tue, Feb 13, 2024 at 05:32:37PM +0100, Sebastian Reichel wrote:
> + rockchip,dp-lane-mux:
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + minItems: 2
> + maxItems: 4
> + description:
> + An array of physical Type-C lanes indexes. Position of an entry
> + determines the DisplayPort (DP) lane index, while the value of an entry
> + indicates physical Type-C lane. The supported DP lanes number are 2 or 4.
> + e.g. for 2 lanes DP lanes map, we could have "rockchip,dp-lane-mux = <2,
> + 3>;", assuming DP lane0 on Type-C phy lane2, DP lane1 on Type-C phy
> + lane3. For 4 lanes DP lanes map, we could have "rockchip,dp-lane-mux =
> + <0, 1, 2, 3>;", assuming DP lane0 on Type-C phy lane0, DP lane1 on Type-C
> + phy lane1, DP lane2 on Type-C phy lane2, DP lane3 on Type-C phy lane3.
> If
> + DP lane map by DisplayPort Alt mode, this property is not need.
You missed one of the nits I pointed out on the previous version:
"If DP lanes are mapped by" "not needed."
Otherwise, I think this looks okay to me..
Reviewed-by: Conor Dooley <[email protected]>
Cheers,
Conor.
On Tue, Feb 13, 2024 at 05:32:37PM +0100, Sebastian Reichel wrote:
> Add device tree binding document for Rockchip USBDP Combo PHY
> with Samsung IP block.
>
> Co-developed-by: Frank Wang <[email protected]>
> Signed-off-by: Frank Wang <[email protected]>
> Signed-off-by: Sebastian Reichel <[email protected]>
> ---
> .../bindings/phy/phy-rockchip-usbdp.yaml | 169 ++++++++++++++++++
> 1 file changed, 169 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml
>
> diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml
> new file mode 100644
> index 000000000000..4ac1825144d7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml
> @@ -0,0 +1,169 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/phy-rockchip-usbdp.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Rockchip USBDP Combo PHY with Samsung IP block
> +
> +maintainers:
> + - Frank Wang <[email protected]>
> + - Zhang Yubing <[email protected]>
> +
> +properties:
> + compatible:
> + enum:
> + - rockchip,rk3588-usbdp-phy
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 4
> +
> + clock-names:
> + items:
> + - const: refclk
> + - const: immortal
> + - const: pclk
> + - const: utmi
> +
> + resets:
> + maxItems: 5
> +
> + reset-names:
> + items:
> + - const: init
> + - const: cmn
> + - const: lane
> + - const: pcs_apb
> + - const: pma_apb
> +
> + rockchip,dp-lane-mux:
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + minItems: 2
> + maxItems: 4
items:
maximum: 3
> + description:
> + An array of physical Type-C lanes indexes. Position of an entry
> + determines the DisplayPort (DP) lane index, while the value of an entry
> + indicates physical Type-C lane. The supported DP lanes number are 2 or 4.
> + e.g. for 2 lanes DP lanes map, we could have "rockchip,dp-lane-mux = <2,
> + 3>;", assuming DP lane0 on Type-C phy lane2, DP lane1 on Type-C phy
> + lane3. For 4 lanes DP lanes map, we could have "rockchip,dp-lane-mux =
> + <0, 1, 2, 3>;", assuming DP lane0 on Type-C phy lane0, DP lane1 on Type-C
> + phy lane1, DP lane2 on Type-C phy lane2, DP lane3 on Type-C phy lane3. If
> + DP lane map by DisplayPort Alt mode, this property is not need.
> +
> + rockchip,u2phy-grf:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description:
> + Phandle to the syscon managing the 'usb2 phy general register files'.
> +
> + rockchip,usb-grf:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description:
> + Phandle to the syscon managing the 'usb general register files'.
> +
> + rockchip,usbdpphy-grf:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description:
> + Phandle to the syscon managing the 'usbdp phy general register files'.
> +
> + rockchip,vo-grf:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description:
> + Phandle to the syscon managing the 'video output general register files'.
> + When select the DP lane mapping will request its phandle.
> +
> + sbu1-dc-gpios:
> + description:
> + GPIO connected to the SBU1 line of the USB-C connector via a big resistor
> + (~100K) to apply a DC offset for signalling the connector orientation.
> + maxItems: 1
> +
> + sbu2-dc-gpios:
> + description:
> + GPIO connected to the SBU2 line of the USB-C connector via a big resistor
> + (~100K) to apply a DC offset for signalling the connector orientation.
> + maxItems: 1
> +
> + orientation-switch:
> + description: Flag the port as possible handler of orientation switching
> + type: boolean
> +
> + mode-switch:
> + description: Flag the port as possible handler of altmode switching
> + type: boolean
> +
> + dp-port:
> + type: object
> + additionalProperties: false
> +
> + properties:
> + "#phy-cells":
> + const: 0
> +
> + required:
> + - "#phy-cells"
> +
> + usb3-port:
> + type: object
> + additionalProperties: false
> +
> + properties:
> + "#phy-cells":
> + const: 0
> +
> + required:
> + - "#phy-cells"
I don't see why these child nodes are needed. Just use a cell to define
DP and USB3 phys.
> +
> + port:
> + $ref: /schemas/graph.yaml#/properties/port
> + description:
> + A port node to link the PHY to a TypeC controller for the purpose of
> + handling orientation switching.
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> + - resets
> + - reset-names
> + - dp-port
> + - usb3-port
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/rockchip,rk3588-cru.h>
> + #include <dt-bindings/reset/rockchip,rk3588-cru.h>
> +
> + usbdp_phy0: phy@fed80000 {
> + compatible = "rockchip,rk3588-usbdp-phy";
> + reg = <0xfed80000 0x10000>;
> + clocks = <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>,
> + <&cru CLK_USBDP_PHY0_IMMORTAL>,
> + <&cru PCLK_USBDPPHY0>,
> + <&u2phy0>;
> + clock-names = "refclk", "immortal", "pclk", "utmi";
> + resets = <&cru SRST_USBDP_COMBO_PHY0_INIT>,
> + <&cru SRST_USBDP_COMBO_PHY0_CMN>,
> + <&cru SRST_USBDP_COMBO_PHY0_LANE>,
> + <&cru SRST_USBDP_COMBO_PHY0_PCS>,
> + <&cru SRST_P_USBDPPHY0>;
> + reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb";
> + rockchip,u2phy-grf = <&usb2phy0_grf>;
> + rockchip,usb-grf = <&usb_grf>;
> + rockchip,usbdpphy-grf = <&usbdpphy0_grf>;
> + rockchip,vo-grf = <&vo0_grf>;
> +
> + usbdp_phy0_dp: dp-port {
> + #phy-cells = <0>;
> + };
> +
> + usbdp_phy0_u3: usb3-port {
> + #phy-cells = <0>;
> + };
> + };
> --
> 2.43.0
>