This platform uses the same GPIO controller as Nomadik. It however has
its own pinconf & pinmux controller. EyeQ5 is the first platform to use
gpio-nomadik independently from pinctrl-nomadik.
Signed-off-by: Théo Lebrun <[email protected]>
---
arch/mips/boot/dts/mobileye/eyeq5.dtsi | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/arch/mips/boot/dts/mobileye/eyeq5.dtsi b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
index 8d4f65ec912d..0f18ac73620b 100644
--- a/arch/mips/boot/dts/mobileye/eyeq5.dtsi
+++ b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
@@ -158,6 +158,32 @@ timer {
clocks = <&core0_clk>;
};
};
+
+ gpio0: gpio@1400000 {
+ compatible = "mobileye,eyeq5-gpio";
+ reg = <0x0 0x1400000 0x0 0x1000>;
+ gpio-bank = <0>;
+ ngpios = <29>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 14 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio@1500000 {
+ compatible = "mobileye,eyeq5-gpio";
+ reg = <0x0 0x1500000 0x0 0x1000>;
+ gpio-bank = <1>;
+ ngpios = <23>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 14 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
};
};
--
2.43.1