Add a thermal_read_mode_check helper to make the code
simpler during init. This helps particularly when the new
TPACPI_THERMAL_TPEC_12 mode is added in the next patch.
Suggested-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Vishnu Sankar <[email protected]>
---
Changes in v2
-Minor code cleanup/reformat as recommended.
-Added in missing check for Misbehaving EC.
---
drivers/platform/x86/thinkpad_acpi.c | 142 ++++++++++++++-------------
1 file changed, 72 insertions(+), 70 deletions(-)
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index c4895e9bc714..81df8fe59912 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -6147,6 +6147,77 @@ struct ibm_thermal_sensors_struct {
static enum thermal_access_mode thermal_read_mode;
static bool thermal_use_labels;
+/* Function to check thermal read mode */
+static enum thermal_access_mode thermal_read_mode_check(void)
+{
+ u8 t, ta1, ta2, ver = 0;
+ int i;
+ int acpi_tmp7;
+
+ acpi_tmp7 = acpi_evalf(ec_handle, NULL, "TMP7", "qv");
+
+ if (thinkpad_id.ec_model) {
+ /*
+ * Direct EC access mode: sensors at registers
+ * 0x78-0x7F, 0xC0-0xC7. Registers return 0x00 for
+ * non-implemented, thermal sensors return 0x80 when
+ * not available.
+ *
+ * In some special cases (when Power Supply ID is 0xC2) above rule
+ * cause thermal control issues. Offset 0xEF determines EC version.
+ * 0xC0-0xC7 is not thermal registers in Ver 3.
+ */
+ if (!acpi_ec_read(TP_EC_FUNCREV, &ver))
+ pr_warn("Thinkpad ACPI EC unable to access EC version\n");
+
+ ta1 = ta2 = 0;
+ for (i = 0; i < 8; i++) {
+ if (acpi_ec_read(TP_EC_THERMAL_TMP0 + i, &t)) {
+ ta1 |= t;
+ } else {
+ ta1 = 0;
+ break;
+ }
+ if (ver < 3) {
+ if (acpi_ec_read(TP_EC_THERMAL_TMP8 + i, &t)) {
+ ta2 |= t;
+ } else {
+ ta1 = 0;
+ break;
+ }
+ }
+ }
+
+ if (ta1 == 0) {
+ /* This is sheer paranoia, but we handle it anyway */
+ if (acpi_tmp7) {
+ pr_err("ThinkPad ACPI EC access misbehaving, falling back to ACPI TMPx access mode\n");
+ return TPACPI_THERMAL_ACPI_TMP07;
+ }
+ pr_err("ThinkPad ACPI EC access misbehaving, disabling thermal sensors access\n");
+ return TPACPI_THERMAL_NONE;
+ }
+
+ if (ver >= 3) {
+ thermal_use_labels = true;
+ return TPACPI_THERMAL_TPEC_8;
+ }
+
+ return (ta2 != 0) ? TPACPI_THERMAL_TPEC_16 : TPACPI_THERMAL_TPEC_8;
+ }
+
+ if (acpi_tmp7) {
+ if (tpacpi_is_ibm() && acpi_evalf(ec_handle, NULL, "UPDT", "qv"))
+ /* 600e/x, 770e, 770x */
+ return TPACPI_THERMAL_ACPI_UPDT;
+ /* IBM/LENOVO DSDT EC.TMPx access, max 8 sensors */
+ return TPACPI_THERMAL_ACPI_TMP07;
+ }
+
+ /* temperatures not supported on 570, G4x, R30, R31, R32 */
+ return TPACPI_THERMAL_NONE;
+}
+
/* idx is zero-based */
static int thermal_get_sensor(int idx, s32 *value)
{
@@ -6375,78 +6446,9 @@ static const struct attribute_group temp_label_attr_group = {
static int __init thermal_init(struct ibm_init_struct *iibm)
{
- u8 t, ta1, ta2, ver = 0;
- int i;
- int acpi_tmp7;
-
vdbg_printk(TPACPI_DBG_INIT, "initializing thermal subdriver\n");
- acpi_tmp7 = acpi_evalf(ec_handle, NULL, "TMP7", "qv");
-
- if (thinkpad_id.ec_model) {
- /*
- * Direct EC access mode: sensors at registers
- * 0x78-0x7F, 0xC0-0xC7. Registers return 0x00 for
- * non-implemented, thermal sensors return 0x80 when
- * not available
- * The above rule is unfortunately flawed. This has been seen with
- * 0xC2 (power supply ID) causing thermal control problems.
- * The EC version can be determined by offset 0xEF and at least for
- * version 3 the Lenovo firmware team confirmed that registers 0xC0-0xC7
- * are not thermal registers.
- */
- if (!acpi_ec_read(TP_EC_FUNCREV, &ver))
- pr_warn("Thinkpad ACPI EC unable to access EC version\n");
-
- ta1 = ta2 = 0;
- for (i = 0; i < 8; i++) {
- if (acpi_ec_read(TP_EC_THERMAL_TMP0 + i, &t)) {
- ta1 |= t;
- } else {
- ta1 = 0;
- break;
- }
- if (ver < 3) {
- if (acpi_ec_read(TP_EC_THERMAL_TMP8 + i, &t)) {
- ta2 |= t;
- } else {
- ta1 = 0;
- break;
- }
- }
- }
- if (ta1 == 0) {
- /* This is sheer paranoia, but we handle it anyway */
- if (acpi_tmp7) {
- pr_err("ThinkPad ACPI EC access misbehaving, falling back to ACPI TMPx access mode\n");
- thermal_read_mode = TPACPI_THERMAL_ACPI_TMP07;
- } else {
- pr_err("ThinkPad ACPI EC access misbehaving, disabling thermal sensors access\n");
- thermal_read_mode = TPACPI_THERMAL_NONE;
- }
- } else {
- if (ver >= 3) {
- thermal_read_mode = TPACPI_THERMAL_TPEC_8;
- thermal_use_labels = true;
- } else {
- thermal_read_mode =
- (ta2 != 0) ?
- TPACPI_THERMAL_TPEC_16 : TPACPI_THERMAL_TPEC_8;
- }
- }
- } else if (acpi_tmp7) {
- if (tpacpi_is_ibm() &&
- acpi_evalf(ec_handle, NULL, "UPDT", "qv")) {
- /* 600e/x, 770e, 770x */
- thermal_read_mode = TPACPI_THERMAL_ACPI_UPDT;
- } else {
- /* IBM/LENOVO DSDT EC.TMPx access, max 8 sensors */
- thermal_read_mode = TPACPI_THERMAL_ACPI_TMP07;
- }
- } else {
- /* temperatures not supported on 570, G4x, R30, R31, R32 */
- thermal_read_mode = TPACPI_THERMAL_NONE;
- }
+ thermal_read_mode = thermal_read_mode_check();
vdbg_printk(TPACPI_DBG_INIT, "thermal is %s, mode %d\n",
str_supported(thermal_read_mode != TPACPI_THERMAL_NONE),
--
2.34.1