2024-02-16 22:40:55

by Sebastian Reichel

Subject: [PATCH v3 11/16] ARM: dts: nxp: imx6ul: xnur-gpio -> xnur-gpios

Replace all "xnur-gpio" with "xnur-gpios" in the i.MX6UL(L) Touchscreen
node, since the -gpio suffix is deprecated. All known implementations of
this binding can handle -gpio and -gpios since day 1, so this should be
fully backwards compatible.

Signed-off-by: Sebastian Reichel <[email protected]>
---
arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi | 2 +-
arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts | 2 +-
arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi | 2 +-
arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi
index 2ac40d69425b..f10f0525490b 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi
@@ -321,7 +321,7 @@ &snvs_pwrkey {
&tsc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tsc>;
- xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+ xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
measure-delay-time = <0xffff>;
pre-charge-time = <0xfff>;
status = "okay";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts
index 875ae699c5cb..2ca18f3dad0a 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts
@@ -203,7 +203,7 @@ &pwm8 {
&tsc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tsc>;
- xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+ xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
};

&sai2 {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi
index 18cac19aa9b0..af337f18a266 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi
@@ -156,7 +156,7 @@ &snvs_pwrkey {
&tsc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tsc>;
- xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+ xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
measure-delay-time = <0xffff>;
pre-charge-time = <0xffff>;
status = "okay";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi
index 830b5a5064f2..6d2163250b5d 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi
@@ -273,7 +273,7 @@ &tsc {
pinctrl-names = "default";
pre-charge-time = <0xfff>;
touchscreen-average-samples = <32>;
- xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+ xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
};

/* DHCOM UART1 */
--
2.43.0

2024-02-17 08:41:54

by Krzysztof Kozlowski

Subject: Re: [PATCH v3 11/16] ARM: dts: nxp: imx6ul: xnur-gpio -> xnur-gpios

On 16/02/2024 23:34, Sebastian Reichel wrote:
> Replace all "xnur-gpio" with "xnur-gpios" in the i.MX6UL(L) Touchscreen
> node, since the -gpio suffix is deprecated. All known implementations of
> this binding can handle -gpio and -gpios since day 1, so this should be
> fully backwards compatible.
>
> Signed-off-by: Sebastian Reichel <[email protected]>

Reviewed-by: Krzysztof Kozlowski <[email protected]>

Best regards,
Krzysztof