2024-02-17 19:41:48

by Christian Marangi

[permalink] [raw]
Subject: [net-next RFC PATCH 0/3] net: phy: detach PHY driver OPs from phy_driver struct

Posting as RFC due to the massive change to a fundamental struct.

While adding some PHY ID for Aquantia, I notice that there is a
big problem with duplicating OPs with each PHY.

The original idea to prevent this was to use mask on the PHY ID
and identify PHY Family. Problem is that OEM started to use all
kind of PHY ID and this is not doable, hence for PHY that have
the same OPs, we have to duplicate all of them.

This is present in Aquantia PHY, but is much more present in
other PHY, especially in the BCM7XXX where they use a big macro
for common PHYs.

To reduce patch delta, I added the additional variable without
adding tabs as this would have resulted in a massive patch.
Also to have patch bisectable, this change has to be in one go
hence I had to use this trick to reduce patch delta.

Other solution to this problem were to introduce additional
variables to phy_driver struct but that would have resulted
in having 2 different way to do the same thing and that is not O.K.

I took care to compile-test all the PHY, only exception is the unique
RUST driver, where I still have to learn that funny language and
I didn't had time to update it, so that is the only driver that
I think require some fixup.

I posted 2 example that would benefits from this change, but I can
find much more in other PHY driver.

Christian Marangi (3):
net: phy: detach PHY driver OPs from phy_driver struct
net: phy: aquantia: use common OPs for PHYs where possible
net: phy: bcm7xxx: use common OPs for PHYs where possible

drivers/net/phy/adin.c | 4 +
drivers/net/phy/adin1100.c | 2 +
drivers/net/phy/amd.c | 4 +
drivers/net/phy/aquantia/aquantia_main.c | 189 +++++++++--------------
drivers/net/phy/ax88796b.c | 6 +
drivers/net/phy/bcm-cygnus.c | 4 +
drivers/net/phy/bcm54140.c | 2 +
drivers/net/phy/bcm63xx.c | 4 +
drivers/net/phy/bcm7xxx.c | 72 +++++----
drivers/net/phy/bcm84881.c | 2 +
drivers/net/phy/bcm87xx.c | 4 +
drivers/net/phy/broadcom.c | 42 +++++
drivers/net/phy/cicada.c | 4 +
drivers/net/phy/cortina.c | 2 +
drivers/net/phy/davicom.c | 8 +
drivers/net/phy/dp83640.c | 2 +
drivers/net/phy/dp83822.c | 8 +-
drivers/net/phy/dp83848.c | 2 +
drivers/net/phy/dp83867.c | 2 +
drivers/net/phy/dp83869.c | 2 +
drivers/net/phy/dp83tc811.c | 2 +
drivers/net/phy/dp83td510.c | 2 +
drivers/net/phy/dp83tg720.c | 2 +
drivers/net/phy/et1011c.c | 2 +
drivers/net/phy/icplus.c | 8 +
drivers/net/phy/intel-xway.c | 20 +++
drivers/net/phy/lxt.c | 8 +
drivers/net/phy/marvell-88q2xxx.c | 2 +
drivers/net/phy/marvell-88x2222.c | 2 +
drivers/net/phy/marvell.c | 44 +++++-
drivers/net/phy/marvell10g.c | 16 +-
drivers/net/phy/mediatek-ge-soc.c | 4 +
drivers/net/phy/mediatek-ge.c | 4 +
drivers/net/phy/meson-gxl.c | 4 +
drivers/net/phy/micrel.c | 54 ++++++-
drivers/net/phy/microchip.c | 2 +
drivers/net/phy/microchip_t1.c | 4 +
drivers/net/phy/microchip_t1s.c | 4 +
drivers/net/phy/motorcomm.c | 8 +
drivers/net/phy/mscc/mscc_main.c | 30 ++++
drivers/net/phy/mxl-gpy.c | 24 +++
drivers/net/phy/national.c | 2 +
drivers/net/phy/ncn26000.c | 2 +
drivers/net/phy/nxp-c45-tja11xx.c | 8 +-
drivers/net/phy/nxp-cbtx.c | 2 +
drivers/net/phy/nxp-tja11xx.c | 16 +-
drivers/net/phy/phy-c45.c | 2 +
drivers/net/phy/phy-core.c | 18 ++-
drivers/net/phy/phy.c | 85 +++++-----
drivers/net/phy/phy_device.c | 79 +++++-----
drivers/net/phy/qcom/at803x.c | 18 ++-
drivers/net/phy/qcom/qca807x.c | 4 +
drivers/net/phy/qcom/qca808x.c | 2 +
drivers/net/phy/qcom/qca83xx.c | 12 +-
drivers/net/phy/qsemi.c | 2 +
drivers/net/phy/realtek.c | 46 +++++-
drivers/net/phy/rockchip.c | 2 +
drivers/net/phy/smsc.c | 14 ++
drivers/net/phy/ste10Xp.c | 4 +
drivers/net/phy/teranetics.c | 2 +
drivers/net/phy/uPD60620.c | 2 +
drivers/net/phy/vitesse.c | 22 +++
drivers/net/phy/xilinx_gmii2rgmii.c | 16 +-
include/linux/phy.h | 57 ++++---
64 files changed, 737 insertions(+), 291 deletions(-)

--
2.43.0



2024-02-17 19:42:11

by Christian Marangi

[permalink] [raw]
Subject: [net-next RFC PATCH 2/3] net: phy: aquantia: use common OPs for PHYs where possible

Group common OPs for PHY, make them static and reference these
statically link OPs table instead of duplicating them for each PHY.

Signed-off-by: Christian Marangi <[email protected]>
---
drivers/net/phy/aquantia/aquantia_main.c | 207 ++++++++---------------
1 file changed, 69 insertions(+), 138 deletions(-)

diff --git a/drivers/net/phy/aquantia/aquantia_main.c b/drivers/net/phy/aquantia/aquantia_main.c
index 2166370ccc82..5720ceda303f 100644
--- a/drivers/net/phy/aquantia/aquantia_main.c
+++ b/drivers/net/phy/aquantia/aquantia_main.c
@@ -768,53 +768,14 @@ static int aqr111_config_init(struct phy_device *phydev)
return aqr107_config_init(phydev);
}

-static struct phy_driver aqr_driver[] = {
-{
- PHY_ID_MATCH_MODEL(PHY_ID_AQ1202),
- .name = "Aquantia AQ1202",
- .ops = &(const struct phy_driver_ops){
- .config_aneg = aqr_config_aneg,
- .config_intr = aqr_config_intr,
- .handle_interrupt = aqr_handle_interrupt,
- .read_status = aqr_read_status,
- },
-},
-{
- PHY_ID_MATCH_MODEL(PHY_ID_AQ2104),
- .name = "Aquantia AQ2104",
- .ops = &(const struct phy_driver_ops){
- .config_aneg = aqr_config_aneg,
- .config_intr = aqr_config_intr,
- .handle_interrupt = aqr_handle_interrupt,
- .read_status = aqr_read_status,
- },
-},
-{
- PHY_ID_MATCH_MODEL(PHY_ID_AQR105),
- .name = "Aquantia AQR105",
- .ops = &(const struct phy_driver_ops){
- .config_aneg = aqr_config_aneg,
- .config_intr = aqr_config_intr,
- .handle_interrupt = aqr_handle_interrupt,
- .read_status = aqr_read_status,
- .suspend = aqr107_suspend,
- .resume = aqr107_resume,
- },
-},
-{
- PHY_ID_MATCH_MODEL(PHY_ID_AQR106),
- .name = "Aquantia AQR106",
- .ops = &(const struct phy_driver_ops){
+static const struct phy_driver_ops aqr106_ops = {
.config_aneg = aqr_config_aneg,
.config_intr = aqr_config_intr,
.handle_interrupt = aqr_handle_interrupt,
.read_status = aqr_read_status,
- },
-},
-{
- PHY_ID_MATCH_MODEL(PHY_ID_AQR107),
- .name = "Aquantia AQR107",
- .ops = &(const struct phy_driver_ops){
+};
+
+static const struct phy_driver_ops aqr107_ops = {
.probe = aqr107_probe,
.get_rate_matching = aqr107_get_rate_matching,
.config_init = aqr107_config_init,
@@ -830,15 +791,12 @@ static struct phy_driver aqr_driver[] = {
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
.link_change_notify = aqr107_link_change_notify,
- },
-},
-{
- PHY_ID_MATCH_MODEL(PHY_ID_AQCS109),
- .name = "Aquantia AQCS109",
- .ops = &(const struct phy_driver_ops){
+};
+
+static const struct phy_driver_ops aqr111_ops = {
.probe = aqr107_probe,
.get_rate_matching = aqr107_get_rate_matching,
- .config_init = aqcs109_config_init,
+ .config_init = aqr111_config_init,
.config_aneg = aqr_config_aneg,
.config_intr = aqr_config_intr,
.handle_interrupt = aqr_handle_interrupt,
@@ -851,36 +809,66 @@ static struct phy_driver aqr_driver[] = {
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
.link_change_notify = aqr107_link_change_notify,
- },
+};
+
+static const struct phy_driver_ops aqr113_ops = {
+ .probe = aqr107_probe,
+ .get_rate_matching = aqr107_get_rate_matching,
+ .config_init = aqr113c_config_init,
+ .config_aneg = aqr_config_aneg,
+ .config_intr = aqr_config_intr,
+ .handle_interrupt = aqr_handle_interrupt,
+ .read_status = aqr107_read_status,
+ .get_tunable = aqr107_get_tunable,
+ .set_tunable = aqr107_set_tunable,
+ .suspend = aqr107_suspend,
+ .resume = aqr107_resume,
+ .get_sset_count = aqr107_get_sset_count,
+ .get_strings = aqr107_get_strings,
+ .get_stats = aqr107_get_stats,
+ .link_change_notify = aqr107_link_change_notify,
+};
+
+static struct phy_driver aqr_driver[] = {
+{
+ PHY_ID_MATCH_MODEL(PHY_ID_AQ1202),
+ .name = "Aquantia AQ1202",
+ .ops = &aqr106_ops,
},
{
- PHY_ID_MATCH_MODEL(PHY_ID_AQR111),
- .name = "Aquantia AQR111",
+ PHY_ID_MATCH_MODEL(PHY_ID_AQ2104),
+ .name = "Aquantia AQ2104",
+ .ops = &aqr106_ops,
+},
+{
+ PHY_ID_MATCH_MODEL(PHY_ID_AQR105),
+ .name = "Aquantia AQR105",
.ops = &(const struct phy_driver_ops){
- .probe = aqr107_probe,
- .get_rate_matching = aqr107_get_rate_matching,
- .config_init = aqr111_config_init,
.config_aneg = aqr_config_aneg,
.config_intr = aqr_config_intr,
.handle_interrupt = aqr_handle_interrupt,
- .read_status = aqr107_read_status,
- .get_tunable = aqr107_get_tunable,
- .set_tunable = aqr107_set_tunable,
+ .read_status = aqr_read_status,
.suspend = aqr107_suspend,
.resume = aqr107_resume,
- .get_sset_count = aqr107_get_sset_count,
- .get_strings = aqr107_get_strings,
- .get_stats = aqr107_get_stats,
- .link_change_notify = aqr107_link_change_notify,
},
},
{
- PHY_ID_MATCH_MODEL(PHY_ID_AQR111B0),
- .name = "Aquantia AQR111B0",
+ PHY_ID_MATCH_MODEL(PHY_ID_AQR106),
+ .name = "Aquantia AQR106",
+ .ops = &aqr106_ops,
+},
+{
+ PHY_ID_MATCH_MODEL(PHY_ID_AQR107),
+ .name = "Aquantia AQR107",
+ .ops = &aqr107_ops,
+},
+{
+ PHY_ID_MATCH_MODEL(PHY_ID_AQCS109),
+ .name = "Aquantia AQCS109",
.ops = &(const struct phy_driver_ops){
.probe = aqr107_probe,
.get_rate_matching = aqr107_get_rate_matching,
- .config_init = aqr111_config_init,
+ .config_init = aqcs109_config_init,
.config_aneg = aqr_config_aneg,
.config_intr = aqr_config_intr,
.handle_interrupt = aqr_handle_interrupt,
@@ -895,97 +883,40 @@ static struct phy_driver aqr_driver[] = {
.link_change_notify = aqr107_link_change_notify,
},
},
+{
+ PHY_ID_MATCH_MODEL(PHY_ID_AQR111),
+ .name = "Aquantia AQR111",
+ .ops = &aqr111_ops,
+},
+{
+ PHY_ID_MATCH_MODEL(PHY_ID_AQR111B0),
+ .name = "Aquantia AQR111B0",
+ .ops = &aqr111_ops,
+},
{
PHY_ID_MATCH_MODEL(PHY_ID_AQR405),
.name = "Aquantia AQR405",
- .ops = &(const struct phy_driver_ops){
- .config_aneg = aqr_config_aneg,
- .config_intr = aqr_config_intr,
- .handle_interrupt = aqr_handle_interrupt,
- .read_status = aqr_read_status,
- },
+ .ops = &aqr106_ops,
},
{
PHY_ID_MATCH_MODEL(PHY_ID_AQR112),
.name = "Aquantia AQR112",
- .ops = &(const struct phy_driver_ops){
- .probe = aqr107_probe,
- .config_aneg = aqr_config_aneg,
- .config_intr = aqr_config_intr,
- .handle_interrupt = aqr_handle_interrupt,
- .get_tunable = aqr107_get_tunable,
- .set_tunable = aqr107_set_tunable,
- .suspend = aqr107_suspend,
- .resume = aqr107_resume,
- .read_status = aqr107_read_status,
- .get_rate_matching = aqr107_get_rate_matching,
- .get_sset_count = aqr107_get_sset_count,
- .get_strings = aqr107_get_strings,
- .get_stats = aqr107_get_stats,
- .link_change_notify = aqr107_link_change_notify,
- },
+ .ops = &aqr107_ops,
},
{
PHY_ID_MATCH_MODEL(PHY_ID_AQR412),
.name = "Aquantia AQR412",
- .ops = &(const struct phy_driver_ops){
- .probe = aqr107_probe,
- .config_aneg = aqr_config_aneg,
- .config_intr = aqr_config_intr,
- .handle_interrupt = aqr_handle_interrupt,
- .get_tunable = aqr107_get_tunable,
- .set_tunable = aqr107_set_tunable,
- .suspend = aqr107_suspend,
- .resume = aqr107_resume,
- .read_status = aqr107_read_status,
- .get_rate_matching = aqr107_get_rate_matching,
- .get_sset_count = aqr107_get_sset_count,
- .get_strings = aqr107_get_strings,
- .get_stats = aqr107_get_stats,
- .link_change_notify = aqr107_link_change_notify,
- },
+ .ops = &aqr107_ops,
},
{
PHY_ID_MATCH_MODEL(PHY_ID_AQR113),
.name = "Aquantia AQR113",
- .ops = &(const struct phy_driver_ops){
- .probe = aqr107_probe,
- .get_rate_matching = aqr107_get_rate_matching,
- .config_init = aqr113c_config_init,
- .config_aneg = aqr_config_aneg,
- .config_intr = aqr_config_intr,
- .handle_interrupt = aqr_handle_interrupt,
- .read_status = aqr107_read_status,
- .get_tunable = aqr107_get_tunable,
- .set_tunable = aqr107_set_tunable,
- .suspend = aqr107_suspend,
- .resume = aqr107_resume,
- .get_sset_count = aqr107_get_sset_count,
- .get_strings = aqr107_get_strings,
- .get_stats = aqr107_get_stats,
- .link_change_notify = aqr107_link_change_notify,
- },
+ .ops = &aqr113_ops,
},
{
PHY_ID_MATCH_MODEL(PHY_ID_AQR113C),
.name = "Aquantia AQR113C",
- .ops = &(const struct phy_driver_ops){
- .probe = aqr107_probe,
- .get_rate_matching = aqr107_get_rate_matching,
- .config_init = aqr113c_config_init,
- .config_aneg = aqr_config_aneg,
- .config_intr = aqr_config_intr,
- .handle_interrupt = aqr_handle_interrupt,
- .read_status = aqr107_read_status,
- .get_tunable = aqr107_get_tunable,
- .set_tunable = aqr107_set_tunable,
- .suspend = aqr107_suspend,
- .resume = aqr107_resume,
- .get_sset_count = aqr107_get_sset_count,
- .get_strings = aqr107_get_strings,
- .get_stats = aqr107_get_stats,
- .link_change_notify = aqr107_link_change_notify,
- },
+ .ops = &aqr113_ops,
},
};

--
2.43.0


2024-02-17 19:42:33

by Christian Marangi

[permalink] [raw]
Subject: [net-next RFC PATCH 3/3] net: phy: bcm7xxx: use common OPs for PHYs where possible

Group common OPs for PHY, make them static and reference these
statically link OPs table instead of duplicating them for each PHY.

Signed-off-by: Christian Marangi <[email protected]>
---
drivers/net/phy/bcm7xxx.c | 80 +++++++++++++++++++++------------------
1 file changed, 44 insertions(+), 36 deletions(-)

diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
index c820a94b30a4..adfe364846dd 100644
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -840,6 +840,17 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
return ret;
}

+static const struct phy_driver_ops bcm7xxx_28nm_gpy_ops = {
+ .config_init = bcm7xxx_28nm_config_init,
+ .resume = bcm7xxx_28nm_resume,
+ .get_tunable = bcm7xxx_28nm_get_tunable,
+ .set_tunable = bcm7xxx_28nm_set_tunable,
+ .get_sset_count = bcm_phy_get_sset_count,
+ .get_strings = bcm_phy_get_strings,
+ .get_stats = bcm7xxx_28nm_get_phy_stats,
+ .probe = bcm7xxx_28nm_probe,
+};
+
#define BCM7XXX_28NM_GPHY(_oui, _name) \
{ \
.phy_id = (_oui), \
@@ -847,18 +858,20 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
.name = _name, \
/* PHY_GBIT_FEATURES */ \
.flags = PHY_IS_INTERNAL, \
- .ops = &(const struct phy_driver_ops){ \
- .config_init = bcm7xxx_28nm_config_init, \
- .resume = bcm7xxx_28nm_resume, \
- .get_tunable = bcm7xxx_28nm_get_tunable, \
- .set_tunable = bcm7xxx_28nm_set_tunable, \
- .get_sset_count = bcm_phy_get_sset_count, \
- .get_strings = bcm_phy_get_strings, \
- .get_stats = bcm7xxx_28nm_get_phy_stats, \
- .probe = bcm7xxx_28nm_probe, \
- }, \
+ .ops = &bcm7xxx_28nm_gpy_ops, \
}

+static const struct phy_driver_ops bcm7xxx_28nm_ephy_ops = {
+ .config_init = bcm7xxx_28nm_ephy_config_init,
+ .resume = bcm7xxx_28nm_ephy_resume,
+ .get_sset_count = bcm_phy_get_sset_count,
+ .get_strings = bcm_phy_get_strings,
+ .get_stats = bcm7xxx_28nm_get_phy_stats,
+ .probe = bcm7xxx_28nm_probe,
+ .read_mmd = bcm7xxx_28nm_ephy_read_mmd,
+ .write_mmd = bcm7xxx_28nm_ephy_write_mmd,
+};
+
#define BCM7XXX_28NM_EPHY(_oui, _name) \
{ \
.phy_id = (_oui), \
@@ -866,18 +879,16 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
.name = _name, \
/* PHY_BASIC_FEATURES */ \
.flags = PHY_IS_INTERNAL, \
- .ops = &(const struct phy_driver_ops){ \
- .config_init = bcm7xxx_28nm_ephy_config_init, \
- .resume = bcm7xxx_28nm_ephy_resume, \
- .get_sset_count = bcm_phy_get_sset_count, \
- .get_strings = bcm_phy_get_strings, \
- .get_stats = bcm7xxx_28nm_get_phy_stats, \
- .probe = bcm7xxx_28nm_probe, \
- .read_mmd = bcm7xxx_28nm_ephy_read_mmd, \
- .write_mmd = bcm7xxx_28nm_ephy_write_mmd, \
- }, \
+ .ops = &bcm7xxx_28nm_ephy_ops, \
}

+static const struct phy_driver_ops bcm7xxx_40nm_ephy_ops = {
+ .soft_reset = genphy_soft_reset,
+ .config_init = bcm7xxx_config_init,
+ .suspend = bcm7xxx_suspend,
+ .resume = bcm7xxx_config_init,
+};
+
#define BCM7XXX_40NM_EPHY(_oui, _name) \
{ \
.phy_id = (_oui), \
@@ -885,14 +896,20 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
.name = _name, \
/* PHY_BASIC_FEATURES */ \
.flags = PHY_IS_INTERNAL, \
- .ops = &(const struct phy_driver_ops){ \
- .soft_reset = genphy_soft_reset, \
- .config_init = bcm7xxx_config_init, \
- .suspend = bcm7xxx_suspend, \
- .resume = bcm7xxx_config_init, \
- }, \
+ .ops = &bcm7xxx_40nm_ephy_ops, \
}

+static const struct phy_driver_ops bcm7xxx_16nm_ephy_ops = {
+ .get_sset_count = bcm_phy_get_sset_count,
+ .get_strings = bcm_phy_get_strings,
+ .get_stats = bcm7xxx_28nm_get_phy_stats,
+ .probe = bcm7xxx_28nm_probe,
+ .config_init = bcm7xxx_16nm_ephy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .resume = bcm7xxx_16nm_ephy_resume,
+};
+
#define BCM7XXX_16NM_EPHY(_oui, _name) \
{ \
.phy_id = (_oui), \
@@ -900,16 +917,7 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
.name = _name, \
/* PHY_BASIC_FEATURES */ \
.flags = PHY_IS_INTERNAL, \
- .ops = &(const struct phy_driver_ops){ \
- .get_sset_count = bcm_phy_get_sset_count, \
- .get_strings = bcm_phy_get_strings, \
- .get_stats = bcm7xxx_28nm_get_phy_stats, \
- .probe = bcm7xxx_28nm_probe, \
- .config_init = bcm7xxx_16nm_ephy_config_init, \
- .config_aneg = genphy_config_aneg, \
- .read_status = genphy_read_status, \
- .resume = bcm7xxx_16nm_ephy_resume, \
- }, \
+ .ops = &bcm7xxx_16nm_ephy_ops, \
}

static struct phy_driver bcm7xxx_driver[] = {
--
2.43.0


2024-02-17 19:43:03

by Christian Marangi

[permalink] [raw]
Subject: [net-next RFC PATCH 1/3] net: phy: detach PHY driver OPs from phy_driver struct

Detach PHY driver OPs from phy_driver struct. This permits a strict
separation between const OPs and PHY model/family specific values/flags.

Many if not all PHYs driver currently have duplicated OPs for different
PHY model/family where PHY_ID matching/mask can't be used. This
limitation cause the side-effect of having to duplicate the PHY OPs for
each PHY ID causing useless bloat/wasted space.

To solve this problem, deatch PHY driver OPs from phy_driver so they
can be declared statically and just be referenced by pointer.

Each PHY driver is updated to this new phy_driver structure by simply
declaring the OPs in a locally define struct inside phy_driver to reduce
patch delta.

Signed-off-by: Christian Marangi <[email protected]>
---
drivers/net/phy/adin.c | 4 ++
drivers/net/phy/adin1100.c | 2 +
drivers/net/phy/amd.c | 4 ++
drivers/net/phy/aquantia/aquantia_main.c | 26 ++++++++
drivers/net/phy/ax88796b.c | 6 ++
drivers/net/phy/bcm-cygnus.c | 4 ++
drivers/net/phy/bcm54140.c | 2 +
drivers/net/phy/bcm63xx.c | 4 ++
drivers/net/phy/bcm7xxx.c | 8 +++
drivers/net/phy/bcm84881.c | 2 +
drivers/net/phy/bcm87xx.c | 4 ++
drivers/net/phy/broadcom.c | 42 ++++++++++++
drivers/net/phy/cicada.c | 4 ++
drivers/net/phy/cortina.c | 2 +
drivers/net/phy/davicom.c | 8 +++
drivers/net/phy/dp83640.c | 2 +
drivers/net/phy/dp83822.c | 8 ++-
drivers/net/phy/dp83848.c | 2 +
drivers/net/phy/dp83867.c | 2 +
drivers/net/phy/dp83869.c | 2 +
drivers/net/phy/dp83tc811.c | 2 +
drivers/net/phy/dp83td510.c | 2 +
drivers/net/phy/dp83tg720.c | 2 +
drivers/net/phy/et1011c.c | 2 +
drivers/net/phy/icplus.c | 8 +++
drivers/net/phy/intel-xway.c | 20 ++++++
drivers/net/phy/lxt.c | 8 +++
drivers/net/phy/marvell-88q2xxx.c | 2 +
drivers/net/phy/marvell-88x2222.c | 2 +
drivers/net/phy/marvell.c | 44 +++++++++++-
drivers/net/phy/marvell10g.c | 16 +++--
drivers/net/phy/mediatek-ge-soc.c | 4 ++
drivers/net/phy/mediatek-ge.c | 4 ++
drivers/net/phy/meson-gxl.c | 4 ++
drivers/net/phy/micrel.c | 54 ++++++++++++---
drivers/net/phy/microchip.c | 2 +
drivers/net/phy/microchip_t1.c | 4 ++
drivers/net/phy/microchip_t1s.c | 4 ++
drivers/net/phy/motorcomm.c | 8 +++
drivers/net/phy/mscc/mscc_main.c | 30 +++++++++
drivers/net/phy/mxl-gpy.c | 24 +++++++
drivers/net/phy/national.c | 2 +
drivers/net/phy/ncn26000.c | 2 +
drivers/net/phy/nxp-c45-tja11xx.c | 8 ++-
drivers/net/phy/nxp-cbtx.c | 2 +
drivers/net/phy/nxp-tja11xx.c | 16 +++--
drivers/net/phy/phy-c45.c | 2 +
drivers/net/phy/phy-core.c | 18 ++---
drivers/net/phy/phy.c | 85 ++++++++++++------------
drivers/net/phy/phy_device.c | 79 +++++++++++-----------
drivers/net/phy/qcom/at803x.c | 18 ++++-
drivers/net/phy/qcom/qca807x.c | 4 ++
drivers/net/phy/qcom/qca808x.c | 2 +
drivers/net/phy/qcom/qca83xx.c | 12 +++-
drivers/net/phy/qsemi.c | 2 +
drivers/net/phy/realtek.c | 46 ++++++++++++-
drivers/net/phy/rockchip.c | 2 +
drivers/net/phy/smsc.c | 14 ++++
drivers/net/phy/ste10Xp.c | 4 ++
drivers/net/phy/teranetics.c | 2 +
drivers/net/phy/uPD60620.c | 2 +
drivers/net/phy/vitesse.c | 22 ++++++
drivers/net/phy/xilinx_gmii2rgmii.c | 16 +++--
include/linux/phy.h | 57 +++++++++-------
64 files changed, 654 insertions(+), 147 deletions(-)

diff --git a/drivers/net/phy/adin.c b/drivers/net/phy/adin.c
index 2e1a46e121d9..469fba4eb500 100644
--- a/drivers/net/phy/adin.c
+++ b/drivers/net/phy/adin.c
@@ -994,6 +994,7 @@ static struct phy_driver adin_driver[] = {
PHY_ID_MATCH_MODEL(PHY_ID_ADIN1200),
.name = "ADIN1200",
.flags = PHY_POLL_CABLE_TEST,
+ .ops = &(const struct phy_driver_ops){
.probe = adin_probe,
.config_init = adin_config_init,
.soft_reset = adin_soft_reset,
@@ -1012,11 +1013,13 @@ static struct phy_driver adin_driver[] = {
.write_mmd = adin_write_mmd,
.cable_test_start = adin_cable_test_start,
.cable_test_get_status = adin_cable_test_get_status,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_ADIN1300),
.name = "ADIN1300",
.flags = PHY_POLL_CABLE_TEST,
+ .ops = &(const struct phy_driver_ops){
.probe = adin_probe,
.config_init = adin_config_init,
.soft_reset = adin_soft_reset,
@@ -1035,6 +1038,7 @@ static struct phy_driver adin_driver[] = {
.write_mmd = adin_write_mmd,
.cable_test_start = adin_cable_test_start,
.cable_test_get_status = adin_cable_test_get_status,
+ },
},
};

diff --git a/drivers/net/phy/adin1100.c b/drivers/net/phy/adin1100.c
index 85f910e2d4fb..0e85f177d4d8 100644
--- a/drivers/net/phy/adin1100.c
+++ b/drivers/net/phy/adin1100.c
@@ -323,6 +323,7 @@ static struct phy_driver adin_driver[] = {
.phy_id = PHY_ID_ADIN1100,
.phy_id_mask = 0xffffffcf,
.name = "ADIN1100",
+ .ops = &(const struct phy_driver_ops){
.get_features = adin_get_features,
.soft_reset = adin_soft_reset,
.probe = adin_probe,
@@ -335,6 +336,7 @@ static struct phy_driver adin_driver[] = {
.resume = adin_resume,
.get_sqi = adin_get_sqi,
.get_sqi_max = adin_get_sqi_max,
+ },
},
};

diff --git a/drivers/net/phy/amd.c b/drivers/net/phy/amd.c
index 930b15fa6ce9..7bf5031a8021 100644
--- a/drivers/net/phy/amd.c
+++ b/drivers/net/phy/amd.c
@@ -94,18 +94,22 @@ static struct phy_driver am79c_drivers[] = {
.name = "AM79C874",
.phy_id_mask = 0xfffffff0,
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = am79c_config_init,
.config_intr = am79c_config_intr,
.handle_interrupt = am79c_handle_interrupt,
+ },
},
{
.phy_id = PHY_ID_AC101L,
.name = "AC101L",
.phy_id_mask = 0xfffffff0,
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = am79c_config_init,
.config_intr = am79c_config_intr,
.handle_interrupt = am79c_handle_interrupt,
+ },
},
};

diff --git a/drivers/net/phy/aquantia/aquantia_main.c b/drivers/net/phy/aquantia/aquantia_main.c
index a6a7980585f5..2166370ccc82 100644
--- a/drivers/net/phy/aquantia/aquantia_main.c
+++ b/drivers/net/phy/aquantia/aquantia_main.c
@@ -772,40 +772,49 @@ static struct phy_driver aqr_driver[] = {
{
PHY_ID_MATCH_MODEL(PHY_ID_AQ1202),
.name = "Aquantia AQ1202",
+ .ops = &(const struct phy_driver_ops){
.config_aneg = aqr_config_aneg,
.config_intr = aqr_config_intr,
.handle_interrupt = aqr_handle_interrupt,
.read_status = aqr_read_status,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_AQ2104),
.name = "Aquantia AQ2104",
+ .ops = &(const struct phy_driver_ops){
.config_aneg = aqr_config_aneg,
.config_intr = aqr_config_intr,
.handle_interrupt = aqr_handle_interrupt,
.read_status = aqr_read_status,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_AQR105),
.name = "Aquantia AQR105",
+ .ops = &(const struct phy_driver_ops){
.config_aneg = aqr_config_aneg,
.config_intr = aqr_config_intr,
.handle_interrupt = aqr_handle_interrupt,
.read_status = aqr_read_status,
.suspend = aqr107_suspend,
.resume = aqr107_resume,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_AQR106),
.name = "Aquantia AQR106",
+ .ops = &(const struct phy_driver_ops){
.config_aneg = aqr_config_aneg,
.config_intr = aqr_config_intr,
.handle_interrupt = aqr_handle_interrupt,
.read_status = aqr_read_status,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_AQR107),
.name = "Aquantia AQR107",
+ .ops = &(const struct phy_driver_ops){
.probe = aqr107_probe,
.get_rate_matching = aqr107_get_rate_matching,
.config_init = aqr107_config_init,
@@ -821,10 +830,12 @@ static struct phy_driver aqr_driver[] = {
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
.link_change_notify = aqr107_link_change_notify,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_AQCS109),
.name = "Aquantia AQCS109",
+ .ops = &(const struct phy_driver_ops){
.probe = aqr107_probe,
.get_rate_matching = aqr107_get_rate_matching,
.config_init = aqcs109_config_init,
@@ -840,10 +851,12 @@ static struct phy_driver aqr_driver[] = {
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
.link_change_notify = aqr107_link_change_notify,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_AQR111),
.name = "Aquantia AQR111",
+ .ops = &(const struct phy_driver_ops){
.probe = aqr107_probe,
.get_rate_matching = aqr107_get_rate_matching,
.config_init = aqr111_config_init,
@@ -859,10 +872,12 @@ static struct phy_driver aqr_driver[] = {
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
.link_change_notify = aqr107_link_change_notify,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_AQR111B0),
.name = "Aquantia AQR111B0",
+ .ops = &(const struct phy_driver_ops){
.probe = aqr107_probe,
.get_rate_matching = aqr107_get_rate_matching,
.config_init = aqr111_config_init,
@@ -878,18 +893,22 @@ static struct phy_driver aqr_driver[] = {
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
.link_change_notify = aqr107_link_change_notify,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_AQR405),
.name = "Aquantia AQR405",
+ .ops = &(const struct phy_driver_ops){
.config_aneg = aqr_config_aneg,
.config_intr = aqr_config_intr,
.handle_interrupt = aqr_handle_interrupt,
.read_status = aqr_read_status,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_AQR112),
.name = "Aquantia AQR112",
+ .ops = &(const struct phy_driver_ops){
.probe = aqr107_probe,
.config_aneg = aqr_config_aneg,
.config_intr = aqr_config_intr,
@@ -904,10 +923,12 @@ static struct phy_driver aqr_driver[] = {
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
.link_change_notify = aqr107_link_change_notify,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_AQR412),
.name = "Aquantia AQR412",
+ .ops = &(const struct phy_driver_ops){
.probe = aqr107_probe,
.config_aneg = aqr_config_aneg,
.config_intr = aqr_config_intr,
@@ -922,10 +943,12 @@ static struct phy_driver aqr_driver[] = {
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
.link_change_notify = aqr107_link_change_notify,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_AQR113),
.name = "Aquantia AQR113",
+ .ops = &(const struct phy_driver_ops){
.probe = aqr107_probe,
.get_rate_matching = aqr107_get_rate_matching,
.config_init = aqr113c_config_init,
@@ -941,10 +964,12 @@ static struct phy_driver aqr_driver[] = {
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
.link_change_notify = aqr107_link_change_notify,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_AQR113C),
.name = "Aquantia AQR113C",
+ .ops = &(const struct phy_driver_ops){
.probe = aqr107_probe,
.get_rate_matching = aqr107_get_rate_matching,
.config_init = aqr113c_config_init,
@@ -960,6 +985,7 @@ static struct phy_driver aqr_driver[] = {
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
.link_change_notify = aqr107_link_change_notify,
+ },
},
};

diff --git a/drivers/net/phy/ax88796b.c b/drivers/net/phy/ax88796b.c
index eb74a8cf8df1..a89ffa5231c8 100644
--- a/drivers/net/phy/ax88796b.c
+++ b/drivers/net/phy/ax88796b.c
@@ -99,24 +99,30 @@ static struct phy_driver asix_driver[] = {
PHY_ID_MATCH_EXACT(PHY_ID_ASIX_AX88772A),
.name = "Asix Electronics AX88772A",
.flags = PHY_IS_INTERNAL,
+ .ops = &(const struct phy_driver_ops){
.read_status = asix_ax88772a_read_status,
.suspend = genphy_suspend,
.resume = genphy_resume,
.soft_reset = asix_soft_reset,
.link_change_notify = asix_ax88772a_link_change_notify,
+ },
}, {
PHY_ID_MATCH_EXACT(PHY_ID_ASIX_AX88772C),
.name = "Asix Electronics AX88772C",
.flags = PHY_IS_INTERNAL,
+ .ops = &(const struct phy_driver_ops){
.suspend = genphy_suspend,
.resume = genphy_resume,
.soft_reset = asix_soft_reset,
+ },
}, {
.phy_id = PHY_ID_ASIX_AX88796B,
.name = "Asix Electronics AX88796B",
.phy_id_mask = 0xfffffff0,
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.soft_reset = asix_soft_reset,
+ },
} };

module_phy_driver(asix_driver);
diff --git a/drivers/net/phy/bcm-cygnus.c b/drivers/net/phy/bcm-cygnus.c
index da8f7cb41b44..0ba02757e578 100644
--- a/drivers/net/phy/bcm-cygnus.c
+++ b/drivers/net/phy/bcm-cygnus.c
@@ -255,17 +255,20 @@ static struct phy_driver bcm_cygnus_phy_driver[] = {
.phy_id_mask = 0xfffffff0,
.name = "Broadcom Cygnus PHY",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = bcm_cygnus_config_init,
.config_intr = bcm_phy_config_intr,
.handle_interrupt = bcm_phy_handle_interrupt,
.suspend = genphy_suspend,
.resume = bcm_cygnus_resume,
+ },
}, {
.phy_id = PHY_ID_BCM_OMEGA,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom Omega Combo GPHY",
/* PHY_GBIT_FEATURES */
.flags = PHY_IS_INTERNAL,
+ .ops = &(const struct phy_driver_ops){
.config_init = bcm_omega_config_init,
.suspend = genphy_suspend,
.resume = bcm_omega_resume,
@@ -275,6 +278,7 @@ static struct phy_driver bcm_cygnus_phy_driver[] = {
.get_strings = bcm_phy_get_strings,
.get_stats = bcm_omega_get_phy_stats,
.probe = bcm_omega_probe,
+ },
}
};

diff --git a/drivers/net/phy/bcm54140.c b/drivers/net/phy/bcm54140.c
index 2eea3d09b1e6..62961334a4f2 100644
--- a/drivers/net/phy/bcm54140.c
+++ b/drivers/net/phy/bcm54140.c
@@ -868,6 +868,7 @@ static struct phy_driver bcm54140_drivers[] = {
.name = "Broadcom BCM54140",
.flags = PHY_POLL_CABLE_TEST,
.features = PHY_GBIT_FEATURES,
+ .ops = &(const struct phy_driver_ops){
.config_init = bcm54140_config_init,
.handle_interrupt = bcm54140_handle_interrupt,
.config_intr = bcm54140_config_intr,
@@ -879,6 +880,7 @@ static struct phy_driver bcm54140_drivers[] = {
.set_tunable = bcm54140_set_tunable,
.cable_test_start = bcm_phy_cable_test_start_rdb,
.cable_test_get_status = bcm_phy_cable_test_get_status_rdb,
+ },
},
};
module_phy_driver(bcm54140_drivers);
diff --git a/drivers/net/phy/bcm63xx.c b/drivers/net/phy/bcm63xx.c
index 0eb33be824f1..76bcde45c65b 100644
--- a/drivers/net/phy/bcm63xx.c
+++ b/drivers/net/phy/bcm63xx.c
@@ -76,9 +76,11 @@ static struct phy_driver bcm63xx_driver[] = {
.name = "Broadcom BCM63XX (1)",
/* PHY_BASIC_FEATURES */
.flags = PHY_IS_INTERNAL,
+ .ops = &(const struct phy_driver_ops){
.config_init = bcm63xx_config_init,
.config_intr = bcm63xx_config_intr,
.handle_interrupt = bcm_phy_handle_interrupt,
+ },
}, {
/* same phy as above, with just a different OUI */
.phy_id = 0x002bdc00,
@@ -86,9 +88,11 @@ static struct phy_driver bcm63xx_driver[] = {
.name = "Broadcom BCM63XX (2)",
/* PHY_BASIC_FEATURES */
.flags = PHY_IS_INTERNAL,
+ .ops = &(const struct phy_driver_ops){
.config_init = bcm63xx_config_init,
.config_intr = bcm63xx_config_intr,
.handle_interrupt = bcm_phy_handle_interrupt,
+ },
} };

module_phy_driver(bcm63xx_driver);
diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
index 97638ba7ae85..c820a94b30a4 100644
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -847,6 +847,7 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
.name = _name, \
/* PHY_GBIT_FEATURES */ \
.flags = PHY_IS_INTERNAL, \
+ .ops = &(const struct phy_driver_ops){ \
.config_init = bcm7xxx_28nm_config_init, \
.resume = bcm7xxx_28nm_resume, \
.get_tunable = bcm7xxx_28nm_get_tunable, \
@@ -855,6 +856,7 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
.get_strings = bcm_phy_get_strings, \
.get_stats = bcm7xxx_28nm_get_phy_stats, \
.probe = bcm7xxx_28nm_probe, \
+ }, \
}

#define BCM7XXX_28NM_EPHY(_oui, _name) \
@@ -864,6 +866,7 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
.name = _name, \
/* PHY_BASIC_FEATURES */ \
.flags = PHY_IS_INTERNAL, \
+ .ops = &(const struct phy_driver_ops){ \
.config_init = bcm7xxx_28nm_ephy_config_init, \
.resume = bcm7xxx_28nm_ephy_resume, \
.get_sset_count = bcm_phy_get_sset_count, \
@@ -872,6 +875,7 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
.probe = bcm7xxx_28nm_probe, \
.read_mmd = bcm7xxx_28nm_ephy_read_mmd, \
.write_mmd = bcm7xxx_28nm_ephy_write_mmd, \
+ }, \
}

#define BCM7XXX_40NM_EPHY(_oui, _name) \
@@ -881,10 +885,12 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
.name = _name, \
/* PHY_BASIC_FEATURES */ \
.flags = PHY_IS_INTERNAL, \
+ .ops = &(const struct phy_driver_ops){ \
.soft_reset = genphy_soft_reset, \
.config_init = bcm7xxx_config_init, \
.suspend = bcm7xxx_suspend, \
.resume = bcm7xxx_config_init, \
+ }, \
}

#define BCM7XXX_16NM_EPHY(_oui, _name) \
@@ -894,6 +900,7 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
.name = _name, \
/* PHY_BASIC_FEATURES */ \
.flags = PHY_IS_INTERNAL, \
+ .ops = &(const struct phy_driver_ops){ \
.get_sset_count = bcm_phy_get_sset_count, \
.get_strings = bcm_phy_get_strings, \
.get_stats = bcm7xxx_28nm_get_phy_stats, \
@@ -902,6 +909,7 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
.config_aneg = genphy_config_aneg, \
.read_status = genphy_read_status, \
.resume = bcm7xxx_16nm_ephy_resume, \
+ }, \
}

static struct phy_driver bcm7xxx_driver[] = {
diff --git a/drivers/net/phy/bcm84881.c b/drivers/net/phy/bcm84881.c
index f1d47c264058..12ced2b60519 100644
--- a/drivers/net/phy/bcm84881.c
+++ b/drivers/net/phy/bcm84881.c
@@ -240,12 +240,14 @@ static struct phy_driver bcm84881_drivers[] = {
.phy_id = 0xae025150,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM84881",
+ .ops = &(const struct phy_driver_ops){
.config_init = bcm84881_config_init,
.probe = bcm84881_probe,
.get_features = bcm84881_get_features,
.config_aneg = bcm84881_config_aneg,
.aneg_done = bcm84881_aneg_done,
.read_status = bcm84881_read_status,
+ },
},
};

diff --git a/drivers/net/phy/bcm87xx.c b/drivers/net/phy/bcm87xx.c
index e81404bf8994..d2f837c93d79 100644
--- a/drivers/net/phy/bcm87xx.c
+++ b/drivers/net/phy/bcm87xx.c
@@ -200,6 +200,7 @@ static struct phy_driver bcm87xx_driver[] = {
.phy_id = PHY_ID_BCM8706,
.phy_id_mask = 0xffffffff,
.name = "Broadcom BCM8706",
+ .ops = &(const struct phy_driver_ops){
.get_features = bcm87xx_get_features,
.config_init = bcm87xx_config_init,
.config_aneg = bcm87xx_config_aneg,
@@ -207,10 +208,12 @@ static struct phy_driver bcm87xx_driver[] = {
.config_intr = bcm87xx_config_intr,
.handle_interrupt = bcm87xx_handle_interrupt,
.match_phy_device = bcm8706_match_phy_device,
+ },
}, {
.phy_id = PHY_ID_BCM8727,
.phy_id_mask = 0xffffffff,
.name = "Broadcom BCM8727",
+ .ops = &(const struct phy_driver_ops){
.get_features = bcm87xx_get_features,
.config_init = bcm87xx_config_init,
.config_aneg = bcm87xx_config_aneg,
@@ -218,6 +221,7 @@ static struct phy_driver bcm87xx_driver[] = {
.config_intr = bcm87xx_config_intr,
.handle_interrupt = bcm87xx_handle_interrupt,
.match_phy_device = bcm8727_match_phy_device,
+ },
} };

module_phy_driver(bcm87xx_driver);
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index 370e4ed45098..48f4949d7f29 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -1068,6 +1068,7 @@ static struct phy_driver broadcom_drivers[] = {
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM5411",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.get_sset_count = bcm_phy_get_sset_count,
.get_strings = bcm_phy_get_strings,
.get_stats = bcm54xx_get_stats,
@@ -1076,11 +1077,13 @@ static struct phy_driver broadcom_drivers[] = {
.config_intr = bcm_phy_config_intr,
.handle_interrupt = bcm_phy_handle_interrupt,
.link_change_notify = bcm54xx_link_change_notify,
+ },
}, {
.phy_id = PHY_ID_BCM5421,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM5421",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.get_sset_count = bcm_phy_get_sset_count,
.get_strings = bcm_phy_get_strings,
.get_stats = bcm54xx_get_stats,
@@ -1089,12 +1092,14 @@ static struct phy_driver broadcom_drivers[] = {
.config_intr = bcm_phy_config_intr,
.handle_interrupt = bcm_phy_handle_interrupt,
.link_change_notify = bcm54xx_link_change_notify,
+ },
}, {
.phy_id = PHY_ID_BCM54210E,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM54210E",
/* PHY_GBIT_FEATURES */
.flags = PHY_ALWAYS_CALL_SUSPEND,
+ .ops = &(const struct phy_driver_ops){
.get_sset_count = bcm_phy_get_sset_count,
.get_strings = bcm_phy_get_strings,
.get_stats = bcm54xx_get_stats,
@@ -1108,11 +1113,13 @@ static struct phy_driver broadcom_drivers[] = {
.get_wol = bcm54xx_phy_get_wol,
.set_wol = bcm54xx_phy_set_wol,
.led_brightness_set = bcm_phy_led_brightness_set,
+ },
}, {
.phy_id = PHY_ID_BCM5461,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM5461",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.get_sset_count = bcm_phy_get_sset_count,
.get_strings = bcm_phy_get_strings,
.get_stats = bcm54xx_get_stats,
@@ -1122,11 +1129,13 @@ static struct phy_driver broadcom_drivers[] = {
.handle_interrupt = bcm_phy_handle_interrupt,
.link_change_notify = bcm54xx_link_change_notify,
.led_brightness_set = bcm_phy_led_brightness_set,
+ },
}, {
.phy_id = PHY_ID_BCM54612E,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM54612E",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.get_sset_count = bcm_phy_get_sset_count,
.get_strings = bcm_phy_get_strings,
.get_stats = bcm54xx_get_stats,
@@ -1138,11 +1147,13 @@ static struct phy_driver broadcom_drivers[] = {
.led_brightness_set = bcm_phy_led_brightness_set,
.suspend = bcm54xx_suspend,
.resume = bcm54xx_resume,
+ },
}, {
.phy_id = PHY_ID_BCM54616S,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM54616S",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.soft_reset = genphy_soft_reset,
.config_init = bcm54xx_config_init,
.config_aneg = bcm54616s_config_aneg,
@@ -1152,11 +1163,13 @@ static struct phy_driver broadcom_drivers[] = {
.probe = bcm54616s_probe,
.link_change_notify = bcm54xx_link_change_notify,
.led_brightness_set = bcm_phy_led_brightness_set,
+ },
}, {
.phy_id = PHY_ID_BCM5464,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM5464",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.get_sset_count = bcm_phy_get_sset_count,
.get_strings = bcm_phy_get_strings,
.get_stats = bcm54xx_get_stats,
@@ -1168,11 +1181,13 @@ static struct phy_driver broadcom_drivers[] = {
.resume = genphy_resume,
.link_change_notify = bcm54xx_link_change_notify,
.led_brightness_set = bcm_phy_led_brightness_set,
+ },
}, {
.phy_id = PHY_ID_BCM5481,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM5481",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.get_sset_count = bcm_phy_get_sset_count,
.get_strings = bcm_phy_get_strings,
.get_stats = bcm54xx_get_stats,
@@ -1183,11 +1198,13 @@ static struct phy_driver broadcom_drivers[] = {
.handle_interrupt = bcm_phy_handle_interrupt,
.link_change_notify = bcm54xx_link_change_notify,
.led_brightness_set = bcm_phy_led_brightness_set,
+ },
}, {
.phy_id = PHY_ID_BCM54810,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM54810",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.get_sset_count = bcm_phy_get_sset_count,
.get_strings = bcm_phy_get_strings,
.get_stats = bcm54xx_get_stats,
@@ -1202,11 +1219,13 @@ static struct phy_driver broadcom_drivers[] = {
.resume = bcm54xx_resume,
.link_change_notify = bcm54xx_link_change_notify,
.led_brightness_set = bcm_phy_led_brightness_set,
+ },
}, {
.phy_id = PHY_ID_BCM54811,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM54811",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.get_sset_count = bcm_phy_get_sset_count,
.get_strings = bcm_phy_get_strings,
.get_stats = bcm54xx_get_stats,
@@ -1219,11 +1238,13 @@ static struct phy_driver broadcom_drivers[] = {
.resume = bcm54xx_resume,
.link_change_notify = bcm54xx_link_change_notify,
.led_brightness_set = bcm_phy_led_brightness_set,
+ },
}, {
.phy_id = PHY_ID_BCM5482,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM5482",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.get_sset_count = bcm_phy_get_sset_count,
.get_strings = bcm_phy_get_strings,
.get_stats = bcm54xx_get_stats,
@@ -1233,11 +1254,13 @@ static struct phy_driver broadcom_drivers[] = {
.handle_interrupt = bcm_phy_handle_interrupt,
.link_change_notify = bcm54xx_link_change_notify,
.led_brightness_set = bcm_phy_led_brightness_set,
+ },
}, {
.phy_id = PHY_ID_BCM50610,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM50610",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.get_sset_count = bcm_phy_get_sset_count,
.get_strings = bcm_phy_get_strings,
.get_stats = bcm54xx_get_stats,
@@ -1249,11 +1272,13 @@ static struct phy_driver broadcom_drivers[] = {
.suspend = bcm54xx_suspend,
.resume = bcm54xx_resume,
.led_brightness_set = bcm_phy_led_brightness_set,
+ },
}, {
.phy_id = PHY_ID_BCM50610M,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM50610M",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.get_sset_count = bcm_phy_get_sset_count,
.get_strings = bcm_phy_get_strings,
.get_stats = bcm54xx_get_stats,
@@ -1265,11 +1290,13 @@ static struct phy_driver broadcom_drivers[] = {
.suspend = bcm54xx_suspend,
.resume = bcm54xx_resume,
.led_brightness_set = bcm_phy_led_brightness_set,
+ },
}, {
.phy_id = PHY_ID_BCM57780,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM57780",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.get_sset_count = bcm_phy_get_sset_count,
.get_strings = bcm_phy_get_strings,
.get_stats = bcm54xx_get_stats,
@@ -1279,31 +1306,37 @@ static struct phy_driver broadcom_drivers[] = {
.handle_interrupt = bcm_phy_handle_interrupt,
.link_change_notify = bcm54xx_link_change_notify,
.led_brightness_set = bcm_phy_led_brightness_set,
+ },
}, {
.phy_id = PHY_ID_BCMAC131,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCMAC131",
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = brcm_fet_config_init,
.config_intr = brcm_fet_config_intr,
.handle_interrupt = brcm_fet_handle_interrupt,
.suspend = brcm_fet_suspend,
.resume = brcm_fet_config_init,
+ },
}, {
.phy_id = PHY_ID_BCM5241,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM5241",
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = brcm_fet_config_init,
.config_intr = brcm_fet_config_intr,
.handle_interrupt = brcm_fet_handle_interrupt,
.suspend = brcm_fet_suspend,
.resume = brcm_fet_config_init,
+ },
}, {
.phy_id = PHY_ID_BCM5221,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM5221",
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = brcm_fet_config_init,
.config_intr = brcm_fet_config_intr,
.handle_interrupt = brcm_fet_handle_interrupt,
@@ -1311,24 +1344,28 @@ static struct phy_driver broadcom_drivers[] = {
.resume = brcm_fet_config_init,
.config_aneg = bcm5221_config_aneg,
.read_status = bcm5221_read_status,
+ },
}, {
.phy_id = PHY_ID_BCM5395,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM5395",
.flags = PHY_IS_INTERNAL,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.get_sset_count = bcm_phy_get_sset_count,
.get_strings = bcm_phy_get_strings,
.get_stats = bcm54xx_get_stats,
.probe = bcm54xx_phy_probe,
.link_change_notify = bcm54xx_link_change_notify,
.led_brightness_set = bcm_phy_led_brightness_set,
+ },
}, {
.phy_id = PHY_ID_BCM53125,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM53125",
.flags = PHY_IS_INTERNAL,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.get_sset_count = bcm_phy_get_sset_count,
.get_strings = bcm_phy_get_strings,
.get_stats = bcm54xx_get_stats,
@@ -1338,12 +1375,14 @@ static struct phy_driver broadcom_drivers[] = {
.handle_interrupt = bcm_phy_handle_interrupt,
.link_change_notify = bcm54xx_link_change_notify,
.led_brightness_set = bcm_phy_led_brightness_set,
+ },
}, {
.phy_id = PHY_ID_BCM53128,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM53128",
.flags = PHY_IS_INTERNAL,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.get_sset_count = bcm_phy_get_sset_count,
.get_strings = bcm_phy_get_strings,
.get_stats = bcm54xx_get_stats,
@@ -1353,11 +1392,13 @@ static struct phy_driver broadcom_drivers[] = {
.handle_interrupt = bcm_phy_handle_interrupt,
.link_change_notify = bcm54xx_link_change_notify,
.led_brightness_set = bcm_phy_led_brightness_set,
+ },
}, {
.phy_id = PHY_ID_BCM89610,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM89610",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.get_sset_count = bcm_phy_get_sset_count,
.get_strings = bcm_phy_get_strings,
.get_stats = bcm54xx_get_stats,
@@ -1366,6 +1407,7 @@ static struct phy_driver broadcom_drivers[] = {
.config_intr = bcm_phy_config_intr,
.handle_interrupt = bcm_phy_handle_interrupt,
.link_change_notify = bcm54xx_link_change_notify,
+ },
} };

module_phy_driver(broadcom_drivers);
diff --git a/drivers/net/phy/cicada.c b/drivers/net/phy/cicada.c
index ef5f412e101f..77269c11d305 100644
--- a/drivers/net/phy/cicada.c
+++ b/drivers/net/phy/cicada.c
@@ -130,17 +130,21 @@ static struct phy_driver cis820x_driver[] = {
.name = "Cicada Cis8201",
.phy_id_mask = 0x000ffff0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = &cis820x_config_init,
.config_intr = &cis820x_config_intr,
.handle_interrupt = &cis820x_handle_interrupt,
+ },
}, {
.phy_id = 0x000fc440,
.name = "Cicada Cis8204",
.phy_id_mask = 0x000fffc0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = &cis820x_config_init,
.config_intr = &cis820x_config_intr,
.handle_interrupt = &cis820x_handle_interrupt,
+ },
} };

module_phy_driver(cis820x_driver);
diff --git a/drivers/net/phy/cortina.c b/drivers/net/phy/cortina.c
index 40514a94e6ff..8e76865533fa 100644
--- a/drivers/net/phy/cortina.c
+++ b/drivers/net/phy/cortina.c
@@ -79,9 +79,11 @@ static struct phy_driver cortina_driver[] = {
.phy_id_mask = 0xffffffff,
.name = "Cortina CS4340",
.features = PHY_10GBIT_FEATURES,
+ .ops = &(const struct phy_driver_ops){
.config_aneg = gen10g_config_aneg,
.read_status = cortina_read_status,
.probe = cortina_probe,
+ },
},
};

diff --git a/drivers/net/phy/davicom.c b/drivers/net/phy/davicom.c
index 4ac4bce1bf32..874ef7c947e3 100644
--- a/drivers/net/phy/davicom.c
+++ b/drivers/net/phy/davicom.c
@@ -176,35 +176,43 @@ static struct phy_driver dm91xx_driver[] = {
.name = "Davicom DM9161E",
.phy_id_mask = 0x0ffffff0,
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = dm9161_config_init,
.config_aneg = dm9161_config_aneg,
.config_intr = dm9161_config_intr,
.handle_interrupt = dm9161_handle_interrupt,
+ },
}, {
.phy_id = 0x0181b8b0,
.name = "Davicom DM9161B/C",
.phy_id_mask = 0x0ffffff0,
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = dm9161_config_init,
.config_aneg = dm9161_config_aneg,
.config_intr = dm9161_config_intr,
.handle_interrupt = dm9161_handle_interrupt,
+ },
}, {
.phy_id = 0x0181b8a0,
.name = "Davicom DM9161A",
.phy_id_mask = 0x0ffffff0,
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = dm9161_config_init,
.config_aneg = dm9161_config_aneg,
.config_intr = dm9161_config_intr,
.handle_interrupt = dm9161_handle_interrupt,
+ },
}, {
.phy_id = 0x00181b80,
.name = "Davicom DM9131",
.phy_id_mask = 0x0ffffff0,
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_intr = dm9161_config_intr,
.handle_interrupt = dm9161_handle_interrupt,
+ },
} };

module_phy_driver(dm91xx_driver);
diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c
index 5c42c47dc564..3c601608d713 100644
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -1520,12 +1520,14 @@ static struct phy_driver dp83640_driver = {
.phy_id_mask = 0xfffffff0,
.name = "NatSemi DP83640",
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.probe = dp83640_probe,
.remove = dp83640_remove,
.soft_reset = dp83640_soft_reset,
.config_init = dp83640_config_init,
.config_intr = dp83640_config_intr,
.handle_interrupt = dp83640_handle_interrupt,
+ },
};

static int __init dp83640_init(void)
diff --git a/drivers/net/phy/dp83822.c b/drivers/net/phy/dp83822.c
index 30f2616ab1c2..7e12c89586c2 100644
--- a/drivers/net/phy/dp83822.c
+++ b/drivers/net/phy/dp83822.c
@@ -544,7 +544,7 @@ static int dp83822_phy_reset(struct phy_device *phydev)
if (err < 0)
return err;

- return phydev->drv->config_init(phydev);
+ return phydev->drv->ops->config_init(phydev);
}

#ifdef CONFIG_OF_MDIO
@@ -704,6 +704,7 @@ static int dp83822_resume(struct phy_device *phydev)
PHY_ID_MATCH_MODEL(_id), \
.name = (_name), \
/* PHY_BASIC_FEATURES */ \
+ .ops = &(const struct phy_driver_ops){\
.probe = dp83822_probe, \
.soft_reset = dp83822_phy_reset, \
.config_init = dp83822_config_init, \
@@ -714,6 +715,7 @@ static int dp83822_resume(struct phy_device *phydev)
.handle_interrupt = dp83822_handle_interrupt, \
.suspend = dp83822_suspend, \
.resume = dp83822_resume, \
+ }, \
}

#define DP83826_PHY_DRIVER(_id, _name) \
@@ -721,6 +723,7 @@ static int dp83822_resume(struct phy_device *phydev)
PHY_ID_MATCH_MODEL(_id), \
.name = (_name), \
/* PHY_BASIC_FEATURES */ \
+ .ops = &(const struct phy_driver_ops){\
.probe = dp83826_probe, \
.soft_reset = dp83822_phy_reset, \
.config_init = dp83826_config_init, \
@@ -730,6 +733,7 @@ static int dp83822_resume(struct phy_device *phydev)
.handle_interrupt = dp83822_handle_interrupt, \
.suspend = dp83822_suspend, \
.resume = dp83822_resume, \
+ }, \
}

#define DP8382X_PHY_DRIVER(_id, _name) \
@@ -737,6 +741,7 @@ static int dp83822_resume(struct phy_device *phydev)
PHY_ID_MATCH_MODEL(_id), \
.name = (_name), \
/* PHY_BASIC_FEATURES */ \
+ .ops = &(const struct phy_driver_ops){\
.soft_reset = dp83822_phy_reset, \
.config_init = dp8382x_config_init, \
.get_wol = dp83822_get_wol, \
@@ -745,6 +750,7 @@ static int dp83822_resume(struct phy_device *phydev)
.handle_interrupt = dp83822_handle_interrupt, \
.suspend = dp83822_suspend, \
.resume = dp83822_resume, \
+ }, \
}

static struct phy_driver dp83822_driver[] = {
diff --git a/drivers/net/phy/dp83848.c b/drivers/net/phy/dp83848.c
index 937061acfc61..2d21614eab5e 100644
--- a/drivers/net/phy/dp83848.c
+++ b/drivers/net/phy/dp83848.c
@@ -139,6 +139,7 @@ MODULE_DEVICE_TABLE(mdio, dp83848_tbl);
.name = _name, \
/* PHY_BASIC_FEATURES */ \
\
+ .ops = &(const struct phy_driver_ops){\
.soft_reset = genphy_soft_reset, \
.config_init = _config_init, \
.suspend = genphy_suspend, \
@@ -147,6 +148,7 @@ MODULE_DEVICE_TABLE(mdio, dp83848_tbl);
/* IRQ related */ \
.config_intr = dp83848_config_intr, \
.handle_interrupt = dp83848_handle_interrupt, \
+ }, \
}

static struct phy_driver dp83848_driver[] = {
diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
index 4120385c5a79..efd0bf47ee8d 100644
--- a/drivers/net/phy/dp83867.c
+++ b/drivers/net/phy/dp83867.c
@@ -1180,6 +1180,7 @@ static struct phy_driver dp83867_driver[] = {
.name = "TI DP83867",
/* PHY_GBIT_FEATURES */

+ .ops = &(const struct phy_driver_ops){
.probe = dp83867_probe,
.config_init = dp83867_config_init,
.soft_reset = dp83867_phy_reset,
@@ -1206,6 +1207,7 @@ static struct phy_driver dp83867_driver[] = {
.led_hw_control_set = dp83867_led_hw_control_set,
.led_hw_control_get = dp83867_led_hw_control_get,
.led_polarity_set = dp83867_led_polarity_set,
+ },
},
};
module_phy_driver(dp83867_driver);
diff --git a/drivers/net/phy/dp83869.c b/drivers/net/phy/dp83869.c
index fa8c6fdcf301..f9313483333d 100644
--- a/drivers/net/phy/dp83869.c
+++ b/drivers/net/phy/dp83869.c
@@ -893,6 +893,7 @@ static int dp83869_phy_reset(struct phy_device *phydev)
{ \
PHY_ID_MATCH_MODEL(_id), \
.name = (_name), \
+ .ops = &(const struct phy_driver_ops){ \
.probe = dp83869_probe, \
.config_init = dp83869_config_init, \
.soft_reset = dp83869_phy_reset, \
@@ -905,6 +906,7 @@ static int dp83869_phy_reset(struct phy_device *phydev)
.set_wol = dp83869_set_wol, \
.suspend = genphy_suspend, \
.resume = genphy_resume, \
+ }, \
}

static struct phy_driver dp83869_driver[] = {
diff --git a/drivers/net/phy/dp83tc811.c b/drivers/net/phy/dp83tc811.c
index 7ea32fb77190..20ea42f1b753 100644
--- a/drivers/net/phy/dp83tc811.c
+++ b/drivers/net/phy/dp83tc811.c
@@ -390,6 +390,7 @@ static struct phy_driver dp83811_driver[] = {
.phy_id_mask = 0xfffffff0,
.name = "TI DP83TC811",
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = dp83811_config_init,
.config_aneg = dp83811_config_aneg,
.soft_reset = dp83811_phy_reset,
@@ -399,6 +400,7 @@ static struct phy_driver dp83811_driver[] = {
.handle_interrupt = dp83811_handle_interrupt,
.suspend = dp83811_suspend,
.resume = dp83811_resume,
+ },
},
};
module_phy_driver(dp83811_driver);
diff --git a/drivers/net/phy/dp83td510.c b/drivers/net/phy/dp83td510.c
index d7616b13c594..354800718d66 100644
--- a/drivers/net/phy/dp83td510.c
+++ b/drivers/net/phy/dp83td510.c
@@ -221,6 +221,7 @@ static struct phy_driver dp83td510_driver[] = {
PHY_ID_MATCH_MODEL(DP83TD510E_PHY_ID),
.name = "TI DP83TD510E",

+ .ops = &(const struct phy_driver_ops){
.config_aneg = dp83td510_config_aneg,
.read_status = dp83td510_read_status,
.get_features = dp83td510_get_features,
@@ -231,6 +232,7 @@ static struct phy_driver dp83td510_driver[] = {

.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
} };
module_phy_driver(dp83td510_driver);

diff --git a/drivers/net/phy/dp83tg720.c b/drivers/net/phy/dp83tg720.c
index 326c9770a6dc..216db7a8945e 100644
--- a/drivers/net/phy/dp83tg720.c
+++ b/drivers/net/phy/dp83tg720.c
@@ -165,6 +165,7 @@ static struct phy_driver dp83tg720_driver[] = {
PHY_ID_MATCH_MODEL(DP83TG720S_PHY_ID),
.name = "TI DP83TG720S",

+ .ops = &(const struct phy_driver_ops){
.config_aneg = dp83tg720_config_aneg,
.read_status = dp83tg720_read_status,
.get_features = genphy_c45_pma_read_ext_abilities,
@@ -174,6 +175,7 @@ static struct phy_driver dp83tg720_driver[] = {

.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
} };
module_phy_driver(dp83tg720_driver);

diff --git a/drivers/net/phy/et1011c.c b/drivers/net/phy/et1011c.c
index be1b71d7cab7..9b570f6c1f3c 100644
--- a/drivers/net/phy/et1011c.c
+++ b/drivers/net/phy/et1011c.c
@@ -88,8 +88,10 @@ static struct phy_driver et1011c_driver[] = { {
.name = "ET1011C",
.phy_id_mask = 0xfffffff0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_aneg = et1011c_config_aneg,
.read_status = et1011c_read_status,
+ },
} };

module_phy_driver(et1011c_driver);
diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c
index a00a667454a9..37611df4705f 100644
--- a/drivers/net/phy/icplus.c
+++ b/drivers/net/phy/icplus.c
@@ -576,21 +576,26 @@ static struct phy_driver icplus_driver[] = {
PHY_ID_MATCH_MODEL(IP175C_PHY_ID),
.name = "ICPlus IP175C",
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = ip175c_config_init,
.config_aneg = ip175c_config_aneg,
.read_status = ip175c_read_status,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
PHY_ID_MATCH_MODEL(IP1001_PHY_ID),
.name = "ICPlus IP1001",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = ip1001_config_init,
.soft_reset = genphy_soft_reset,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
.name = "ICPlus IP101A",
+ .ops = &(const struct phy_driver_ops){
.match_phy_device = ip101a_match_phy_device,
.probe = ip101a_g_probe,
.read_page = ip101a_read_page,
@@ -603,8 +608,10 @@ static struct phy_driver icplus_driver[] = {
.soft_reset = genphy_soft_reset,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
.name = "ICPlus IP101G",
+ .ops = &(const struct phy_driver_ops){
.match_phy_device = ip101g_match_phy_device,
.probe = ip101a_g_probe,
.read_page = ip101g_read_page,
@@ -620,6 +627,7 @@ static struct phy_driver icplus_driver[] = {
.get_stats = ip101g_get_stats,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
} };

module_phy_driver(icplus_driver);
diff --git a/drivers/net/phy/intel-xway.c b/drivers/net/phy/intel-xway.c
index 3c032868ef04..ce22d89e92ec 100644
--- a/drivers/net/phy/intel-xway.c
+++ b/drivers/net/phy/intel-xway.c
@@ -353,105 +353,125 @@ static struct phy_driver xway_gphy[] = {
.phy_id_mask = 0xffffffff,
.name = "Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.3",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = xway_gphy_config_init,
.config_aneg = xway_gphy14_config_aneg,
.handle_interrupt = xway_gphy_handle_interrupt,
.config_intr = xway_gphy_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
.phy_id = PHY_ID_PHY22F_1_3,
.phy_id_mask = 0xffffffff,
.name = "Intel XWAY PHY22F (PEF 7061) v1.3",
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = xway_gphy_config_init,
.config_aneg = xway_gphy14_config_aneg,
.handle_interrupt = xway_gphy_handle_interrupt,
.config_intr = xway_gphy_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
.phy_id = PHY_ID_PHY11G_1_4,
.phy_id_mask = 0xffffffff,
.name = "Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.4",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = xway_gphy_config_init,
.config_aneg = xway_gphy14_config_aneg,
.handle_interrupt = xway_gphy_handle_interrupt,
.config_intr = xway_gphy_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
.phy_id = PHY_ID_PHY22F_1_4,
.phy_id_mask = 0xffffffff,
.name = "Intel XWAY PHY22F (PEF 7061) v1.4",
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = xway_gphy_config_init,
.config_aneg = xway_gphy14_config_aneg,
.handle_interrupt = xway_gphy_handle_interrupt,
.config_intr = xway_gphy_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
.phy_id = PHY_ID_PHY11G_1_5,
.phy_id_mask = 0xffffffff,
.name = "Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.5 / v1.6",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = xway_gphy_config_init,
.handle_interrupt = xway_gphy_handle_interrupt,
.config_intr = xway_gphy_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
.phy_id = PHY_ID_PHY22F_1_5,
.phy_id_mask = 0xffffffff,
.name = "Intel XWAY PHY22F (PEF 7061) v1.5 / v1.6",
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = xway_gphy_config_init,
.handle_interrupt = xway_gphy_handle_interrupt,
.config_intr = xway_gphy_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
.phy_id = PHY_ID_PHY11G_VR9_1_1,
.phy_id_mask = 0xffffffff,
.name = "Intel XWAY PHY11G (xRX v1.1 integrated)",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = xway_gphy_config_init,
.handle_interrupt = xway_gphy_handle_interrupt,
.config_intr = xway_gphy_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
.phy_id = PHY_ID_PHY22F_VR9_1_1,
.phy_id_mask = 0xffffffff,
.name = "Intel XWAY PHY22F (xRX v1.1 integrated)",
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = xway_gphy_config_init,
.handle_interrupt = xway_gphy_handle_interrupt,
.config_intr = xway_gphy_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
.phy_id = PHY_ID_PHY11G_VR9_1_2,
.phy_id_mask = 0xffffffff,
.name = "Intel XWAY PHY11G (xRX v1.2 integrated)",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = xway_gphy_config_init,
.handle_interrupt = xway_gphy_handle_interrupt,
.config_intr = xway_gphy_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
.phy_id = PHY_ID_PHY22F_VR9_1_2,
.phy_id_mask = 0xffffffff,
.name = "Intel XWAY PHY22F (xRX v1.2 integrated)",
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = xway_gphy_config_init,
.handle_interrupt = xway_gphy_handle_interrupt,
.config_intr = xway_gphy_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
},
};
module_phy_driver(xway_gphy);
diff --git a/drivers/net/phy/lxt.c b/drivers/net/phy/lxt.c
index e3bf827b7959..b0bcb1b1bc4c 100644
--- a/drivers/net/phy/lxt.c
+++ b/drivers/net/phy/lxt.c
@@ -311,39 +311,47 @@ static struct phy_driver lxt97x_driver[] = {
.name = "LXT970",
.phy_id_mask = 0xfffffff0,
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = lxt970_config_init,
.config_intr = lxt970_config_intr,
.handle_interrupt = lxt970_handle_interrupt,
+ },
}, {
.phy_id = 0x001378e0,
.name = "LXT971",
.phy_id_mask = 0xfffffff0,
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_intr = lxt971_config_intr,
.handle_interrupt = lxt971_handle_interrupt,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
.phy_id = 0x00137a10,
.name = "LXT973-A2",
.phy_id_mask = 0xffffffff,
/* PHY_BASIC_FEATURES */
.flags = 0,
+ .ops = &(const struct phy_driver_ops){
.probe = lxt973_probe,
.config_aneg = lxt973_config_aneg,
.read_status = lxt973a2_read_status,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
.phy_id = 0x00137a10,
.name = "LXT973",
.phy_id_mask = 0xfffffff0,
/* PHY_BASIC_FEATURES */
.flags = 0,
+ .ops = &(const struct phy_driver_ops){
.probe = lxt973_probe,
.config_aneg = lxt973_config_aneg,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
} };

module_phy_driver(lxt97x_driver);
diff --git a/drivers/net/phy/marvell-88q2xxx.c b/drivers/net/phy/marvell-88q2xxx.c
index 1c3ff77de56b..6ff13060cd2e 100644
--- a/drivers/net/phy/marvell-88q2xxx.c
+++ b/drivers/net/phy/marvell-88q2xxx.c
@@ -240,6 +240,7 @@ static struct phy_driver mv88q2xxx_driver[] = {
.phy_id = MARVELL_PHY_ID_88Q2110,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "mv88q2110",
+ .ops = &(const struct phy_driver_ops){
.get_features = mv88q2xxx_get_features,
.config_aneg = mv88q2xxx_config_aneg,
.config_init = mv88q2xxx_config_init,
@@ -248,6 +249,7 @@ static struct phy_driver mv88q2xxx_driver[] = {
.set_loopback = genphy_c45_loopback,
.get_sqi = mv88q2xxxx_get_sqi,
.get_sqi_max = mv88q2xxxx_get_sqi_max,
+ },
},
};

diff --git a/drivers/net/phy/marvell-88x2222.c b/drivers/net/phy/marvell-88x2222.c
index e3aa30dad2e6..9de149fca07e 100644
--- a/drivers/net/phy/marvell-88x2222.c
+++ b/drivers/net/phy/marvell-88x2222.c
@@ -600,6 +600,7 @@ static struct phy_driver mv2222_drivers[] = {
.phy_id = MARVELL_PHY_ID_88X2222,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88X2222",
+ .ops = &(const struct phy_driver_ops){
.get_features = mv2222_get_features,
.soft_reset = mv2222_soft_reset,
.config_init = mv2222_config_init,
@@ -609,6 +610,7 @@ static struct phy_driver mv2222_drivers[] = {
.suspend = mv2222_suspend,
.resume = mv2222_resume,
.read_status = mv2222_read_status,
+ },
},
};
module_phy_driver(mv2222_drivers);
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 1faa22f58366..033c10c82c6a 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -3273,6 +3273,7 @@ static struct phy_driver marvell_drivers[] = {
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1101",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.probe = marvell_probe,
.config_init = marvell_config_init,
.config_aneg = m88e1101_config_aneg,
@@ -3285,12 +3286,14 @@ static struct phy_driver marvell_drivers[] = {
.get_sset_count = marvell_get_sset_count,
.get_strings = marvell_get_strings,
.get_stats = marvell_get_stats,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88E1112,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1112",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.probe = marvell_probe,
.config_init = m88e1112_config_init,
.config_aneg = marvell_config_aneg,
@@ -3305,12 +3308,14 @@ static struct phy_driver marvell_drivers[] = {
.get_stats = marvell_get_stats,
.get_tunable = m88e1011_get_tunable,
.set_tunable = m88e1011_set_tunable,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88E1111,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1111",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.probe = marvell_probe,
.config_init = m88e1111gbe_config_init,
.config_aneg = m88e1111_config_aneg,
@@ -3326,12 +3331,14 @@ static struct phy_driver marvell_drivers[] = {
.get_stats = marvell_get_stats,
.get_tunable = m88e1111_get_tunable,
.set_tunable = m88e1111_set_tunable,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88E1111_FINISAR,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1111 (Finisar)",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.probe = marvell_probe,
.config_init = m88e1111gbe_config_init,
.config_aneg = m88e1111_config_aneg,
@@ -3347,12 +3354,14 @@ static struct phy_driver marvell_drivers[] = {
.get_stats = marvell_get_stats,
.get_tunable = m88e1111_get_tunable,
.set_tunable = m88e1111_set_tunable,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88E1118,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1118",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.probe = marvell_probe,
.config_init = m88e1118_config_init,
.config_aneg = m88e1118_config_aneg,
@@ -3365,6 +3374,7 @@ static struct phy_driver marvell_drivers[] = {
.get_sset_count = marvell_get_sset_count,
.get_strings = marvell_get_strings,
.get_stats = marvell_get_stats,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88E1121R,
@@ -3372,6 +3382,7 @@ static struct phy_driver marvell_drivers[] = {
.name = "Marvell 88E1121R",
.driver_data = DEF_MARVELL_HWMON_OPS(m88e1121_hwmon_ops),
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.probe = marvell_probe,
.config_init = marvell_1011gbe_config_init,
.config_aneg = m88e1121_config_aneg,
@@ -3387,12 +3398,14 @@ static struct phy_driver marvell_drivers[] = {
.get_stats = marvell_get_stats,
.get_tunable = m88e1011_get_tunable,
.set_tunable = m88e1011_set_tunable,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88E1318S,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1318S",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.probe = marvell_probe,
.config_init = m88e1318_config_init,
.config_aneg = m88e1318_config_aneg,
@@ -3413,12 +3426,14 @@ static struct phy_driver marvell_drivers[] = {
.led_hw_is_supported = m88e1318_led_hw_is_supported,
.led_hw_control_set = m88e1318_led_hw_control_set,
.led_hw_control_get = m88e1318_led_hw_control_get,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88E1145,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1145",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.probe = marvell_probe,
.config_init = m88e1145_config_init,
.config_aneg = m88e1101_config_aneg,
@@ -3433,12 +3448,14 @@ static struct phy_driver marvell_drivers[] = {
.get_stats = marvell_get_stats,
.get_tunable = m88e1111_get_tunable,
.set_tunable = m88e1111_set_tunable,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88E1149R,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1149R",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.probe = marvell_probe,
.config_init = m88e1149_config_init,
.config_aneg = m88e1118_config_aneg,
@@ -3451,12 +3468,14 @@ static struct phy_driver marvell_drivers[] = {
.get_sset_count = marvell_get_sset_count,
.get_strings = marvell_get_strings,
.get_stats = marvell_get_stats,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88E1240,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1240",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.probe = marvell_probe,
.config_init = m88e1112_config_init,
.config_aneg = marvell_config_aneg,
@@ -3471,12 +3490,14 @@ static struct phy_driver marvell_drivers[] = {
.get_stats = marvell_get_stats,
.get_tunable = m88e1011_get_tunable,
.set_tunable = m88e1011_set_tunable,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88E1116R,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1116R",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.probe = marvell_probe,
.config_init = m88e1116r_config_init,
.config_intr = marvell_config_intr,
@@ -3490,6 +3511,7 @@ static struct phy_driver marvell_drivers[] = {
.get_stats = marvell_get_stats,
.get_tunable = m88e1011_get_tunable,
.set_tunable = m88e1011_set_tunable,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88E1510,
@@ -3498,6 +3520,7 @@ static struct phy_driver marvell_drivers[] = {
.driver_data = DEF_MARVELL_HWMON_OPS(m88e1510_hwmon_ops),
.features = PHY_GBIT_FIBRE_FEATURES,
.flags = PHY_POLL_CABLE_TEST,
+ .ops = &(const struct phy_driver_ops){
.probe = m88e1510_probe,
.config_init = m88e1510_config_init,
.config_aneg = m88e1510_config_aneg,
@@ -3524,6 +3547,7 @@ static struct phy_driver marvell_drivers[] = {
.led_hw_is_supported = m88e1318_led_hw_is_supported,
.led_hw_control_set = m88e1318_led_hw_control_set,
.led_hw_control_get = m88e1318_led_hw_control_get,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88E1540,
@@ -3532,6 +3556,7 @@ static struct phy_driver marvell_drivers[] = {
.driver_data = DEF_MARVELL_HWMON_OPS(m88e1510_hwmon_ops),
/* PHY_GBIT_FEATURES */
.flags = PHY_POLL_CABLE_TEST,
+ .ops = &(const struct phy_driver_ops){
.probe = marvell_probe,
.config_init = marvell_1011gbe_config_init,
.config_aneg = m88e1510_config_aneg,
@@ -3555,15 +3580,17 @@ static struct phy_driver marvell_drivers[] = {
.led_hw_is_supported = m88e1318_led_hw_is_supported,
.led_hw_control_set = m88e1318_led_hw_control_set,
.led_hw_control_get = m88e1318_led_hw_control_get,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88E1545,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1545",
.driver_data = DEF_MARVELL_HWMON_OPS(m88e1510_hwmon_ops),
- .probe = marvell_probe,
/* PHY_GBIT_FEATURES */
.flags = PHY_POLL_CABLE_TEST,
+ .ops = &(const struct phy_driver_ops){
+ .probe = marvell_probe,
.config_init = marvell_1011gbe_config_init,
.config_aneg = m88e1510_config_aneg,
.read_status = marvell_read_status,
@@ -3586,12 +3613,14 @@ static struct phy_driver marvell_drivers[] = {
.led_hw_is_supported = m88e1318_led_hw_is_supported,
.led_hw_control_set = m88e1318_led_hw_control_set,
.led_hw_control_get = m88e1318_led_hw_control_get,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88E3016,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E3016",
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.probe = marvell_probe,
.config_init = m88e3016_config_init,
.aneg_done = marvell_aneg_done,
@@ -3605,6 +3634,7 @@ static struct phy_driver marvell_drivers[] = {
.get_sset_count = marvell_get_sset_count,
.get_strings = marvell_get_strings,
.get_stats = marvell_get_stats,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88E6341_FAMILY,
@@ -3613,6 +3643,7 @@ static struct phy_driver marvell_drivers[] = {
.driver_data = DEF_MARVELL_HWMON_OPS(m88e1510_hwmon_ops),
/* PHY_GBIT_FEATURES */
.flags = PHY_POLL_CABLE_TEST,
+ .ops = &(const struct phy_driver_ops){
.probe = marvell_probe,
.config_init = marvell_1011gbe_config_init,
.config_aneg = m88e6390_config_aneg,
@@ -3631,6 +3662,7 @@ static struct phy_driver marvell_drivers[] = {
.cable_test_start = marvell_vct7_cable_test_start,
.cable_test_tdr_start = marvell_vct5_cable_test_tdr_start,
.cable_test_get_status = marvell_vct7_cable_test_get_status,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88E6390_FAMILY,
@@ -3639,6 +3671,7 @@ static struct phy_driver marvell_drivers[] = {
.driver_data = DEF_MARVELL_HWMON_OPS(m88e6390_hwmon_ops),
/* PHY_GBIT_FEATURES */
.flags = PHY_POLL_CABLE_TEST,
+ .ops = &(const struct phy_driver_ops){
.probe = marvell_probe,
.config_init = marvell_1011gbe_config_init,
.config_aneg = m88e6390_config_aneg,
@@ -3657,6 +3690,7 @@ static struct phy_driver marvell_drivers[] = {
.cable_test_start = marvell_vct7_cable_test_start,
.cable_test_tdr_start = marvell_vct5_cable_test_tdr_start,
.cable_test_get_status = marvell_vct7_cable_test_get_status,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88E6393_FAMILY,
@@ -3665,6 +3699,7 @@ static struct phy_driver marvell_drivers[] = {
.driver_data = DEF_MARVELL_HWMON_OPS(m88e6393_hwmon_ops),
/* PHY_GBIT_FEATURES */
.flags = PHY_POLL_CABLE_TEST,
+ .ops = &(const struct phy_driver_ops){
.probe = marvell_probe,
.config_init = marvell_1011gbe_config_init,
.config_aneg = m88e1510_config_aneg,
@@ -3683,12 +3718,14 @@ static struct phy_driver marvell_drivers[] = {
.cable_test_start = marvell_vct7_cable_test_start,
.cable_test_tdr_start = marvell_vct5_cable_test_tdr_start,
.cable_test_get_status = marvell_vct7_cable_test_get_status,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88E1340S,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1340S",
.driver_data = DEF_MARVELL_HWMON_OPS(m88e1510_hwmon_ops),
+ .ops = &(const struct phy_driver_ops){
.probe = marvell_probe,
/* PHY_GBIT_FEATURES */
.config_init = marvell_1011gbe_config_init,
@@ -3705,14 +3742,16 @@ static struct phy_driver marvell_drivers[] = {
.get_stats = marvell_get_stats,
.get_tunable = m88e1540_get_tunable,
.set_tunable = m88e1540_set_tunable,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88E1548P,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1548P",
.driver_data = DEF_MARVELL_HWMON_OPS(m88e1510_hwmon_ops),
- .probe = marvell_probe,
.features = PHY_GBIT_FIBRE_FEATURES,
+ .ops = &(const struct phy_driver_ops){
+ .probe = marvell_probe,
.config_init = marvell_1011gbe_config_init,
.config_aneg = m88e1510_config_aneg,
.read_status = marvell_read_status,
@@ -3732,6 +3771,7 @@ static struct phy_driver marvell_drivers[] = {
.led_hw_is_supported = m88e1318_led_hw_is_supported,
.led_hw_control_set = m88e1318_led_hw_control_set,
.led_hw_control_get = m88e1318_led_hw_control_get,
+ },
},
};

diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index ad43e280930c..9681c0083ca4 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -1403,9 +1403,10 @@ static struct phy_driver mv3310_drivers[] = {
{
.phy_id = MARVELL_PHY_ID_88X3310,
.phy_id_mask = MARVELL_PHY_ID_MASK,
- .match_phy_device = mv3310_match_phy_device,
.name = "mv88x3310",
.driver_data = &mv3310_type,
+ .ops = &(const struct phy_driver_ops){
+ .match_phy_device = mv3310_match_phy_device,
.get_features = mv3310_get_features,
.config_init = mv3310_config_init,
.probe = mv3310_probe,
@@ -1420,13 +1421,15 @@ static struct phy_driver mv3310_drivers[] = {
.set_loopback = genphy_c45_loopback,
.get_wol = mv3110_get_wol,
.set_wol = mv3110_set_wol,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88X3310,
.phy_id_mask = MARVELL_PHY_ID_MASK,
- .match_phy_device = mv3340_match_phy_device,
.name = "mv88x3340",
.driver_data = &mv3340_type,
+ .ops = &(const struct phy_driver_ops){
+ .match_phy_device = mv3340_match_phy_device,
.get_features = mv3310_get_features,
.config_init = mv3310_config_init,
.probe = mv3310_probe,
@@ -1439,13 +1442,15 @@ static struct phy_driver mv3310_drivers[] = {
.set_tunable = mv3310_set_tunable,
.remove = mv3310_remove,
.set_loopback = genphy_c45_loopback,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88E2110,
.phy_id_mask = MARVELL_PHY_ID_MASK,
- .match_phy_device = mv2110_match_phy_device,
.name = "mv88e2110",
.driver_data = &mv2110_type,
+ .ops = &(const struct phy_driver_ops){
+ .match_phy_device = mv2110_match_phy_device,
.probe = mv3310_probe,
.suspend = mv3310_suspend,
.resume = mv3310_resume,
@@ -1459,13 +1464,15 @@ static struct phy_driver mv3310_drivers[] = {
.set_loopback = genphy_c45_loopback,
.get_wol = mv3110_get_wol,
.set_wol = mv3110_set_wol,
+ },
},
{
.phy_id = MARVELL_PHY_ID_88E2110,
.phy_id_mask = MARVELL_PHY_ID_MASK,
- .match_phy_device = mv2111_match_phy_device,
.name = "mv88e2111",
.driver_data = &mv2111_type,
+ .ops = &(const struct phy_driver_ops){
+ .match_phy_device = mv2111_match_phy_device,
.probe = mv3310_probe,
.suspend = mv3310_suspend,
.resume = mv3310_resume,
@@ -1477,6 +1484,7 @@ static struct phy_driver mv3310_drivers[] = {
.set_tunable = mv3310_set_tunable,
.remove = mv3310_remove,
.set_loopback = genphy_c45_loopback,
+ },
},
};

diff --git a/drivers/net/phy/mediatek-ge-soc.c b/drivers/net/phy/mediatek-ge-soc.c
index 0f3a1538a8b8..f24dc1e37ea1 100644
--- a/drivers/net/phy/mediatek-ge-soc.c
+++ b/drivers/net/phy/mediatek-ge-soc.c
@@ -1497,6 +1497,7 @@ static struct phy_driver mtk_socphy_driver[] = {
{
PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7981),
.name = "MediaTek MT7981 PHY",
+ .ops = &(const struct phy_driver_ops){
.config_init = mt798x_phy_config_init,
.config_intr = genphy_no_config_intr,
.handle_interrupt = genphy_handle_interrupt_no_ack,
@@ -1510,10 +1511,12 @@ static struct phy_driver mtk_socphy_driver[] = {
.led_hw_is_supported = mt798x_phy_led_hw_is_supported,
.led_hw_control_set = mt798x_phy_led_hw_control_set,
.led_hw_control_get = mt798x_phy_led_hw_control_get,
+ },
},
{
PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7988),
.name = "MediaTek MT7988 PHY",
+ .ops = &(const struct phy_driver_ops){
.config_init = mt798x_phy_config_init,
.config_intr = genphy_no_config_intr,
.handle_interrupt = genphy_handle_interrupt_no_ack,
@@ -1527,6 +1530,7 @@ static struct phy_driver mtk_socphy_driver[] = {
.led_hw_is_supported = mt798x_phy_led_hw_is_supported,
.led_hw_control_set = mt798x_phy_led_hw_control_set,
.led_hw_control_get = mt798x_phy_led_hw_control_get,
+ },
},
};

diff --git a/drivers/net/phy/mediatek-ge.c b/drivers/net/phy/mediatek-ge.c
index a493ae01b267..9ac1d02b0b96 100644
--- a/drivers/net/phy/mediatek-ge.c
+++ b/drivers/net/phy/mediatek-ge.c
@@ -72,6 +72,7 @@ static struct phy_driver mtk_gephy_driver[] = {
{
PHY_ID_MATCH_EXACT(0x03a29412),
.name = "MediaTek MT7530 PHY",
+ .ops = &(const struct phy_driver_ops){
.config_init = mt7530_phy_config_init,
/* Interrupts are handled by the switch, not the PHY
* itself.
@@ -82,10 +83,12 @@ static struct phy_driver mtk_gephy_driver[] = {
.resume = genphy_resume,
.read_page = mtk_gephy_read_page,
.write_page = mtk_gephy_write_page,
+ },
},
{
PHY_ID_MATCH_EXACT(0x03a29441),
.name = "MediaTek MT7531 PHY",
+ .ops = &(const struct phy_driver_ops){
.config_init = mt7531_phy_config_init,
/* Interrupts are handled by the switch, not the PHY
* itself.
@@ -96,6 +99,7 @@ static struct phy_driver mtk_gephy_driver[] = {
.resume = genphy_resume,
.read_page = mtk_gephy_read_page,
.write_page = mtk_gephy_write_page,
+ },
},
};

diff --git a/drivers/net/phy/meson-gxl.c b/drivers/net/phy/meson-gxl.c
index bb9b33b6bce2..6e839ea7c74b 100644
--- a/drivers/net/phy/meson-gxl.c
+++ b/drivers/net/phy/meson-gxl.c
@@ -190,6 +190,7 @@ static struct phy_driver meson_gxl_phy[] = {
.name = "Meson GXL Internal PHY",
/* PHY_BASIC_FEATURES */
.flags = PHY_IS_INTERNAL,
+ .ops = &(const struct phy_driver_ops){
.soft_reset = genphy_soft_reset,
.config_init = meson_gxl_config_init,
.read_status = meson_gxl_read_status,
@@ -199,11 +200,13 @@ static struct phy_driver meson_gxl_phy[] = {
.resume = genphy_resume,
.read_mmd = genphy_read_mmd_unsupported,
.write_mmd = genphy_write_mmd_unsupported,
+ },
}, {
PHY_ID_MATCH_EXACT(0x01803301),
.name = "Meson G12A Internal PHY",
/* PHY_BASIC_FEATURES */
.flags = PHY_IS_INTERNAL,
+ .ops = &(const struct phy_driver_ops){
.probe = smsc_phy_probe,
.config_init = smsc_phy_config_init,
.soft_reset = genphy_soft_reset,
@@ -218,6 +221,7 @@ static struct phy_driver meson_gxl_phy[] = {
.resume = genphy_resume,
.read_mmd = genphy_read_mmd_unsupported,
.write_mmd = genphy_write_mmd_unsupported,
+ },
},
};

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 9b6973581989..4ae508e87040 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -1502,8 +1502,8 @@ static int ksz9031_read_status(struct phy_device *phydev)
if ((regval & 0xFF) == 0xFF) {
phy_init_hw(phydev);
phydev->link = 0;
- if (phydev->drv->config_intr && phy_interrupt_is_valid(phydev))
- phydev->drv->config_intr(phydev);
+ if (phydev->drv->ops->config_intr && phy_interrupt_is_valid(phydev))
+ phydev->drv->ops->config_intr(phydev);
return genphy_config_aneg(phydev);
}

@@ -1940,8 +1940,8 @@ static int kszphy_suspend(struct phy_device *phydev)
/* Disable PHY Interrupts */
if (phy_interrupt_is_valid(phydev)) {
phydev->interrupts = PHY_INTERRUPT_DISABLED;
- if (phydev->drv->config_intr)
- phydev->drv->config_intr(phydev);
+ if (phydev->drv->ops->config_intr)
+ phydev->drv->ops->config_intr(phydev);
}

return genphy_suspend(phydev);
@@ -1990,8 +1990,8 @@ static int kszphy_resume(struct phy_device *phydev)
/* Enable PHY Interrupts */
if (phy_interrupt_is_valid(phydev)) {
phydev->interrupts = PHY_INTERRUPT_ENABLED;
- if (phydev->drv->config_intr)
- phydev->drv->config_intr(phydev);
+ if (phydev->drv->ops->config_intr)
+ phydev->drv->ops->config_intr(phydev);
}

return 0;
@@ -4633,18 +4633,21 @@ static struct phy_driver ksphy_driver[] = {
.name = "Micrel KS8737",
/* PHY_BASIC_FEATURES */
.driver_data = &ks8737_type,
+ .ops = &(const struct phy_driver_ops){
.probe = kszphy_probe,
.config_init = kszphy_config_init,
.config_intr = kszphy_config_intr,
.handle_interrupt = kszphy_handle_interrupt,
.suspend = kszphy_suspend,
.resume = kszphy_resume,
+ },
}, {
.phy_id = PHY_ID_KSZ8021,
.phy_id_mask = 0x00ffffff,
.name = "Micrel KSZ8021 or KSZ8031",
/* PHY_BASIC_FEATURES */
.driver_data = &ksz8021_type,
+ .ops = &(const struct phy_driver_ops){
.probe = kszphy_probe,
.config_init = kszphy_config_init,
.config_intr = kszphy_config_intr,
@@ -4654,12 +4657,14 @@ static struct phy_driver ksphy_driver[] = {
.get_stats = kszphy_get_stats,
.suspend = kszphy_suspend,
.resume = kszphy_resume,
+ },
}, {
.phy_id = PHY_ID_KSZ8031,
.phy_id_mask = 0x00ffffff,
.name = "Micrel KSZ8031",
/* PHY_BASIC_FEATURES */
.driver_data = &ksz8021_type,
+ .ops = &(const struct phy_driver_ops){
.probe = kszphy_probe,
.config_init = kszphy_config_init,
.config_intr = kszphy_config_intr,
@@ -4669,12 +4674,14 @@ static struct phy_driver ksphy_driver[] = {
.get_stats = kszphy_get_stats,
.suspend = kszphy_suspend,
.resume = kszphy_resume,
+ },
}, {
.phy_id = PHY_ID_KSZ8041,
.phy_id_mask = MICREL_PHY_ID_MASK,
.name = "Micrel KSZ8041",
/* PHY_BASIC_FEATURES */
.driver_data = &ksz8041_type,
+ .ops = &(const struct phy_driver_ops){
.probe = kszphy_probe,
.config_init = ksz8041_config_init,
.config_aneg = ksz8041_config_aneg,
@@ -4686,12 +4693,14 @@ static struct phy_driver ksphy_driver[] = {
/* No suspend/resume callbacks because of errata DS80000700A,
* receiver error following software power down.
*/
+ },
}, {
.phy_id = PHY_ID_KSZ8041RNLI,
.phy_id_mask = MICREL_PHY_ID_MASK,
.name = "Micrel KSZ8041RNLI",
/* PHY_BASIC_FEATURES */
.driver_data = &ksz8041_type,
+ .ops = &(const struct phy_driver_ops){
.probe = kszphy_probe,
.config_init = kszphy_config_init,
.config_intr = kszphy_config_intr,
@@ -4701,10 +4710,12 @@ static struct phy_driver ksphy_driver[] = {
.get_stats = kszphy_get_stats,
.suspend = kszphy_suspend,
.resume = kszphy_resume,
+ },
}, {
.name = "Micrel KSZ8051",
/* PHY_BASIC_FEATURES */
.driver_data = &ksz8051_type,
+ .ops = &(const struct phy_driver_ops){
.probe = kszphy_probe,
.config_init = kszphy_config_init,
.config_intr = kszphy_config_intr,
@@ -4715,12 +4726,14 @@ static struct phy_driver ksphy_driver[] = {
.match_phy_device = ksz8051_match_phy_device,
.suspend = kszphy_suspend,
.resume = kszphy_resume,
+ },
}, {
.phy_id = PHY_ID_KSZ8001,
.name = "Micrel KSZ8001 or KS8721",
.phy_id_mask = 0x00fffffc,
/* PHY_BASIC_FEATURES */
.driver_data = &ksz8041_type,
+ .ops = &(const struct phy_driver_ops){
.probe = kszphy_probe,
.config_init = kszphy_config_init,
.config_intr = kszphy_config_intr,
@@ -4730,6 +4743,7 @@ static struct phy_driver ksphy_driver[] = {
.get_stats = kszphy_get_stats,
.suspend = kszphy_suspend,
.resume = kszphy_resume,
+ },
}, {
.phy_id = PHY_ID_KSZ8081,
.name = "Micrel KSZ8081 or KSZ8091",
@@ -4737,6 +4751,7 @@ static struct phy_driver ksphy_driver[] = {
.flags = PHY_POLL_CABLE_TEST,
/* PHY_BASIC_FEATURES */
.driver_data = &ksz8081_type,
+ .ops = &(const struct phy_driver_ops){
.probe = kszphy_probe,
.config_init = ksz8081_config_init,
.soft_reset = genphy_soft_reset,
@@ -4751,23 +4766,27 @@ static struct phy_driver ksphy_driver[] = {
.resume = kszphy_resume,
.cable_test_start = ksz886x_cable_test_start,
.cable_test_get_status = ksz886x_cable_test_get_status,
+ },
}, {
.phy_id = PHY_ID_KSZ8061,
.name = "Micrel KSZ8061",
.phy_id_mask = MICREL_PHY_ID_MASK,
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.probe = kszphy_probe,
.config_init = ksz8061_config_init,
.config_intr = kszphy_config_intr,
.handle_interrupt = kszphy_handle_interrupt,
.suspend = kszphy_suspend,
.resume = kszphy_resume,
+ },
}, {
.phy_id = PHY_ID_KSZ9021,
.phy_id_mask = 0x000ffffe,
.name = "Micrel KSZ9021 Gigabit PHY",
/* PHY_GBIT_FEATURES */
.driver_data = &ksz9021_type,
+ .ops = &(const struct phy_driver_ops){
.probe = kszphy_probe,
.get_features = ksz9031_get_features,
.config_init = ksz9021_config_init,
@@ -4780,12 +4799,14 @@ static struct phy_driver ksphy_driver[] = {
.resume = kszphy_resume,
.read_mmd = genphy_read_mmd_unsupported,
.write_mmd = genphy_write_mmd_unsupported,
+ },
}, {
.phy_id = PHY_ID_KSZ9031,
.phy_id_mask = MICREL_PHY_ID_MASK,
.name = "Micrel KSZ9031 Gigabit PHY",
.flags = PHY_POLL_CABLE_TEST,
.driver_data = &ksz9021_type,
+ .ops = &(const struct phy_driver_ops){
.probe = kszphy_probe,
.get_features = ksz9031_get_features,
.config_init = ksz9031_config_init,
@@ -4800,13 +4821,15 @@ static struct phy_driver ksphy_driver[] = {
.resume = kszphy_resume,
.cable_test_start = ksz9x31_cable_test_start,
.cable_test_get_status = ksz9x31_cable_test_get_status,
+ },
}, {
.phy_id = PHY_ID_LAN8814,
.phy_id_mask = MICREL_PHY_ID_MASK,
.name = "Microchip INDY Gigabit Quad PHY",
.flags = PHY_POLL_CABLE_TEST,
- .config_init = lan8814_config_init,
.driver_data = &lan8814_type,
+ .ops = &(const struct phy_driver_ops){
+ .config_init = lan8814_config_init,
.probe = lan8814_probe,
.soft_reset = genphy_soft_reset,
.read_status = ksz9031_read_status,
@@ -4819,12 +4842,14 @@ static struct phy_driver ksphy_driver[] = {
.handle_interrupt = lan8814_handle_interrupt,
.cable_test_start = lan8814_cable_test_start,
.cable_test_get_status = ksz886x_cable_test_get_status,
+ },
}, {
.phy_id = PHY_ID_LAN8804,
.phy_id_mask = MICREL_PHY_ID_MASK,
.name = "Microchip LAN966X Gigabit PHY",
- .config_init = lan8804_config_init,
.driver_data = &ksz9021_type,
+ .ops = &(const struct phy_driver_ops){
+ .config_init = lan8804_config_init,
.probe = kszphy_probe,
.soft_reset = genphy_soft_reset,
.read_status = ksz9031_read_status,
@@ -4835,12 +4860,14 @@ static struct phy_driver ksphy_driver[] = {
.resume = kszphy_resume,
.config_intr = lan8804_config_intr,
.handle_interrupt = lan8804_handle_interrupt,
+ },
}, {
.phy_id = PHY_ID_LAN8841,
.phy_id_mask = MICREL_PHY_ID_MASK,
.name = "Microchip LAN8841 Gigabit PHY",
.flags = PHY_POLL_CABLE_TEST,
.driver_data = &lan8841_type,
+ .ops = &(const struct phy_driver_ops){
.config_init = lan8841_config_init,
.probe = lan8841_probe,
.soft_reset = genphy_soft_reset,
@@ -4853,6 +4880,7 @@ static struct phy_driver ksphy_driver[] = {
.resume = genphy_resume,
.cable_test_start = lan8814_cable_test_start,
.cable_test_get_status = ksz886x_cable_test_get_status,
+ },
}, {
.phy_id = PHY_ID_KSZ9131,
.phy_id_mask = MICREL_PHY_ID_MASK,
@@ -4860,6 +4888,7 @@ static struct phy_driver ksphy_driver[] = {
/* PHY_GBIT_FEATURES */
.flags = PHY_POLL_CABLE_TEST,
.driver_data = &ksz9131_type,
+ .ops = &(const struct phy_driver_ops){
.probe = kszphy_probe,
.soft_reset = genphy_soft_reset,
.config_init = ksz9131_config_init,
@@ -4875,16 +4904,19 @@ static struct phy_driver ksphy_driver[] = {
.cable_test_start = ksz9x31_cable_test_start,
.cable_test_get_status = ksz9x31_cable_test_get_status,
.get_features = ksz9477_get_features,
+ },
}, {
.phy_id = PHY_ID_KSZ8873MLL,
.phy_id_mask = MICREL_PHY_ID_MASK,
.name = "Micrel KSZ8873MLL Switch",
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = kszphy_config_init,
.config_aneg = ksz8873mll_config_aneg,
.read_status = ksz8873mll_read_status,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
.phy_id = PHY_ID_KSZ886X,
.phy_id_mask = MICREL_PHY_ID_MASK,
@@ -4892,6 +4924,7 @@ static struct phy_driver ksphy_driver[] = {
.driver_data = &ksz886x_type,
/* PHY_BASIC_FEATURES */
.flags = PHY_POLL_CABLE_TEST,
+ .ops = &(const struct phy_driver_ops){
.config_init = kszphy_config_init,
.config_aneg = ksz886x_config_aneg,
.read_status = ksz886x_read_status,
@@ -4899,24 +4932,29 @@ static struct phy_driver ksphy_driver[] = {
.resume = genphy_resume,
.cable_test_start = ksz886x_cable_test_start,
.cable_test_get_status = ksz886x_cable_test_get_status,
+ },
}, {
.name = "Micrel KSZ87XX Switch",
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = kszphy_config_init,
.match_phy_device = ksz8795_match_phy_device,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
.phy_id = PHY_ID_KSZ9477,
.phy_id_mask = MICREL_PHY_ID_MASK,
.name = "Microchip KSZ9477",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = ksz9477_config_init,
.config_intr = kszphy_config_intr,
.handle_interrupt = kszphy_handle_interrupt,
.suspend = genphy_suspend,
.resume = genphy_resume,
.get_features = ksz9477_get_features,
+ },
} };

module_phy_driver(ksphy_driver);
diff --git a/drivers/net/phy/microchip.c b/drivers/net/phy/microchip.c
index 0b88635f4fbc..aa0e720cfb6b 100644
--- a/drivers/net/phy/microchip.c
+++ b/drivers/net/phy/microchip.c
@@ -384,6 +384,7 @@ static struct phy_driver microchip_phy_driver[] = {
.name = "Microchip LAN88xx",

/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){

.probe = lan88xx_probe,
.remove = lan88xx_remove,
@@ -400,6 +401,7 @@ static struct phy_driver microchip_phy_driver[] = {
.set_wol = lan88xx_set_wol,
.read_page = lan88xx_read_page,
.write_page = lan88xx_write_page,
+ },
} };

module_phy_driver(microchip_phy_driver);
diff --git a/drivers/net/phy/microchip_t1.c b/drivers/net/phy/microchip_t1.c
index a838b61cd844..df9eb70c998e 100644
--- a/drivers/net/phy/microchip_t1.c
+++ b/drivers/net/phy/microchip_t1.c
@@ -866,6 +866,7 @@ static struct phy_driver microchip_t1_phy_driver[] = {
.name = "Microchip LAN87xx T1",
.flags = PHY_POLL_CABLE_TEST,
.features = PHY_BASIC_T1_FEATURES,
+ .ops = &(const struct phy_driver_ops){
.config_init = lan87xx_config_init,
.config_intr = lan87xx_phy_config_intr,
.handle_interrupt = lan87xx_handle_interrupt,
@@ -877,12 +878,14 @@ static struct phy_driver microchip_t1_phy_driver[] = {
.get_sqi_max = lan87xx_get_sqi_max,
.cable_test_start = lan87xx_cable_test_start,
.cable_test_get_status = lan87xx_cable_test_get_status,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_LAN937X),
.name = "Microchip LAN937x T1",
.flags = PHY_POLL_CABLE_TEST,
.features = PHY_BASIC_T1_FEATURES,
+ .ops = &(const struct phy_driver_ops){
.config_init = lan87xx_config_init,
.config_intr = lan87xx_phy_config_intr,
.handle_interrupt = lan87xx_handle_interrupt,
@@ -894,6 +897,7 @@ static struct phy_driver microchip_t1_phy_driver[] = {
.get_sqi_max = lan87xx_get_sqi_max,
.cable_test_start = lan87xx_cable_test_start,
.cable_test_get_status = lan87xx_cable_test_get_status,
+ },
}
};

diff --git a/drivers/net/phy/microchip_t1s.c b/drivers/net/phy/microchip_t1s.c
index 534ca7d1b061..17b99f1ed090 100644
--- a/drivers/net/phy/microchip_t1s.c
+++ b/drivers/net/phy/microchip_t1s.c
@@ -273,21 +273,25 @@ static struct phy_driver microchip_t1s_driver[] = {
PHY_ID_MATCH_EXACT(PHY_ID_LAN867X_REVB1),
.name = "LAN867X Rev.B1",
.features = PHY_BASIC_T1S_P2MP_FEATURES,
+ .ops = &(const struct phy_driver_ops){
.config_init = lan867x_revb1_config_init,
.read_status = lan86xx_read_status,
.get_plca_cfg = genphy_c45_plca_get_cfg,
.set_plca_cfg = genphy_c45_plca_set_cfg,
.get_plca_status = genphy_c45_plca_get_status,
+ },
},
{
PHY_ID_MATCH_EXACT(PHY_ID_LAN865X_REVB0),
.name = "LAN865X Rev.B0 Internal Phy",
.features = PHY_BASIC_T1S_P2MP_FEATURES,
+ .ops = &(const struct phy_driver_ops){
.config_init = lan865x_revb0_config_init,
.read_status = lan86xx_read_status,
.get_plca_cfg = genphy_c45_plca_get_cfg,
.set_plca_cfg = genphy_c45_plca_set_cfg,
.get_plca_status = genphy_c45_plca_get_status,
+ },
},
};

diff --git a/drivers/net/phy/motorcomm.c b/drivers/net/phy/motorcomm.c
index 7a11fdb687cc..22d6bbc876e7 100644
--- a/drivers/net/phy/motorcomm.c
+++ b/drivers/net/phy/motorcomm.c
@@ -2256,15 +2256,18 @@ static struct phy_driver motorcomm_phy_drvs[] = {
{
PHY_ID_MATCH_EXACT(PHY_ID_YT8511),
.name = "YT8511 Gigabit Ethernet",
+ .ops = &(const struct phy_driver_ops){
.config_init = yt8511_config_init,
.suspend = genphy_suspend,
.resume = genphy_resume,
.read_page = yt8511_read_page,
.write_page = yt8511_write_page,
+ },
},
{
PHY_ID_MATCH_EXACT(PHY_ID_YT8521),
.name = "YT8521 Gigabit Ethernet",
+ .ops = &(const struct phy_driver_ops){
.get_features = yt8521_get_features,
.probe = yt8521_probe,
.read_page = yt8521_read_page,
@@ -2278,10 +2281,12 @@ static struct phy_driver motorcomm_phy_drvs[] = {
.soft_reset = yt8521_soft_reset,
.suspend = yt8521_suspend,
.resume = yt8521_resume,
+ },
},
{
PHY_ID_MATCH_EXACT(PHY_ID_YT8531),
.name = "YT8531 Gigabit Ethernet",
+ .ops = &(const struct phy_driver_ops){
.probe = yt8531_probe,
.config_init = yt8531_config_init,
.suspend = genphy_suspend,
@@ -2289,10 +2294,12 @@ static struct phy_driver motorcomm_phy_drvs[] = {
.get_wol = ytphy_get_wol,
.set_wol = yt8531_set_wol,
.link_change_notify = yt8531_link_change_notify,
+ },
},
{
PHY_ID_MATCH_EXACT(PHY_ID_YT8531S),
.name = "YT8531S Gigabit Ethernet",
+ .ops = &(const struct phy_driver_ops){
.get_features = yt8521_get_features,
.probe = yt8521_probe,
.read_page = yt8521_read_page,
@@ -2306,6 +2313,7 @@ static struct phy_driver motorcomm_phy_drvs[] = {
.soft_reset = yt8521_soft_reset,
.suspend = yt8521_suspend,
.resume = yt8521_resume,
+ },
},
};

diff --git a/drivers/net/phy/mscc/mscc_main.c b/drivers/net/phy/mscc/mscc_main.c
index 6f74ce0ab1aa..923aa45a61f7 100644
--- a/drivers/net/phy/mscc/mscc_main.c
+++ b/drivers/net/phy/mscc/mscc_main.c
@@ -2342,6 +2342,7 @@ static struct phy_driver vsc85xx_driver[] = {
.name = "Microsemi GE VSC8501 SyncE",
.phy_id_mask = 0xfffffff0,
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.soft_reset = &genphy_soft_reset,
.config_init = &vsc85xx_config_init,
.config_aneg = &vsc85xx_config_aneg,
@@ -2360,12 +2361,14 @@ static struct phy_driver vsc85xx_driver[] = {
.get_sset_count = &vsc85xx_get_sset_count,
.get_strings = &vsc85xx_get_strings,
.get_stats = &vsc85xx_get_stats,
+ },
},
{
.phy_id = PHY_ID_VSC8502,
.name = "Microsemi GE VSC8502 SyncE",
.phy_id_mask = 0xfffffff0,
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.soft_reset = &genphy_soft_reset,
.config_init = &vsc85xx_config_init,
.config_aneg = &vsc85xx_config_aneg,
@@ -2384,12 +2387,14 @@ static struct phy_driver vsc85xx_driver[] = {
.get_sset_count = &vsc85xx_get_sset_count,
.get_strings = &vsc85xx_get_strings,
.get_stats = &vsc85xx_get_stats,
+ },
},
{
.phy_id = PHY_ID_VSC8504,
.name = "Microsemi GE VSC8504 SyncE",
.phy_id_mask = 0xfffffff0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.soft_reset = &genphy_soft_reset,
.config_init = &vsc8584_config_init,
.config_aneg = &vsc85xx_config_aneg,
@@ -2409,11 +2414,13 @@ static struct phy_driver vsc85xx_driver[] = {
.get_sset_count = &vsc85xx_get_sset_count,
.get_strings = &vsc85xx_get_strings,
.get_stats = &vsc85xx_get_stats,
+ },
},
{
.phy_id = PHY_ID_VSC8514,
.name = "Microsemi GE VSC8514 SyncE",
.phy_id_mask = 0xfffffff0,
+ .ops = &(const struct phy_driver_ops){
.soft_reset = &genphy_soft_reset,
.config_init = &vsc8514_config_init,
.config_aneg = &vsc85xx_config_aneg,
@@ -2432,12 +2439,14 @@ static struct phy_driver vsc85xx_driver[] = {
.get_sset_count = &vsc85xx_get_sset_count,
.get_strings = &vsc85xx_get_strings,
.get_stats = &vsc85xx_get_stats,
+ },
},
{
.phy_id = PHY_ID_VSC8530,
.name = "Microsemi FE VSC8530",
.phy_id_mask = 0xfffffff0,
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.soft_reset = &genphy_soft_reset,
.config_init = &vsc85xx_config_init,
.config_aneg = &vsc85xx_config_aneg,
@@ -2456,12 +2465,14 @@ static struct phy_driver vsc85xx_driver[] = {
.get_sset_count = &vsc85xx_get_sset_count,
.get_strings = &vsc85xx_get_strings,
.get_stats = &vsc85xx_get_stats,
+ },
},
{
.phy_id = PHY_ID_VSC8531,
.name = "Microsemi VSC8531",
.phy_id_mask = 0xfffffff0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.soft_reset = &genphy_soft_reset,
.config_init = &vsc85xx_config_init,
.config_aneg = &vsc85xx_config_aneg,
@@ -2480,12 +2491,14 @@ static struct phy_driver vsc85xx_driver[] = {
.get_sset_count = &vsc85xx_get_sset_count,
.get_strings = &vsc85xx_get_strings,
.get_stats = &vsc85xx_get_stats,
+ },
},
{
.phy_id = PHY_ID_VSC8540,
.name = "Microsemi FE VSC8540 SyncE",
.phy_id_mask = 0xfffffff0,
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.soft_reset = &genphy_soft_reset,
.config_init = &vsc85xx_config_init,
.config_aneg = &vsc85xx_config_aneg,
@@ -2504,12 +2517,14 @@ static struct phy_driver vsc85xx_driver[] = {
.get_sset_count = &vsc85xx_get_sset_count,
.get_strings = &vsc85xx_get_strings,
.get_stats = &vsc85xx_get_stats,
+ },
},
{
.phy_id = PHY_ID_VSC8541,
.name = "Microsemi VSC8541 SyncE",
.phy_id_mask = 0xfffffff0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.soft_reset = &genphy_soft_reset,
.config_init = &vsc85xx_config_init,
.config_aneg = &vsc85xx_config_aneg,
@@ -2528,12 +2543,14 @@ static struct phy_driver vsc85xx_driver[] = {
.get_sset_count = &vsc85xx_get_sset_count,
.get_strings = &vsc85xx_get_strings,
.get_stats = &vsc85xx_get_stats,
+ },
},
{
.phy_id = PHY_ID_VSC8552,
.name = "Microsemi GE VSC8552 SyncE",
.phy_id_mask = 0xfffffff0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.soft_reset = &genphy_soft_reset,
.config_init = &vsc8584_config_init,
.config_aneg = &vsc85xx_config_aneg,
@@ -2552,12 +2569,14 @@ static struct phy_driver vsc85xx_driver[] = {
.get_sset_count = &vsc85xx_get_sset_count,
.get_strings = &vsc85xx_get_strings,
.get_stats = &vsc85xx_get_stats,
+ },
},
{
.phy_id = PHY_ID_VSC856X,
.name = "Microsemi GE VSC856X SyncE",
.phy_id_mask = 0xfffffff0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.soft_reset = &genphy_soft_reset,
.config_init = &vsc8584_config_init,
.config_aneg = &vsc85xx_config_aneg,
@@ -2574,12 +2593,14 @@ static struct phy_driver vsc85xx_driver[] = {
.get_sset_count = &vsc85xx_get_sset_count,
.get_strings = &vsc85xx_get_strings,
.get_stats = &vsc85xx_get_stats,
+ },
},
{
.phy_id = PHY_ID_VSC8572,
.name = "Microsemi GE VSC8572 SyncE",
.phy_id_mask = 0xfffffff0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.soft_reset = &genphy_soft_reset,
.config_init = &vsc8584_config_init,
.config_aneg = &vsc85xx_config_aneg,
@@ -2599,12 +2620,14 @@ static struct phy_driver vsc85xx_driver[] = {
.get_sset_count = &vsc85xx_get_sset_count,
.get_strings = &vsc85xx_get_strings,
.get_stats = &vsc85xx_get_stats,
+ },
},
{
.phy_id = PHY_ID_VSC8574,
.name = "Microsemi GE VSC8574 SyncE",
.phy_id_mask = 0xfffffff0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.soft_reset = &genphy_soft_reset,
.config_init = &vsc8584_config_init,
.config_aneg = &vsc85xx_config_aneg,
@@ -2624,12 +2647,14 @@ static struct phy_driver vsc85xx_driver[] = {
.get_sset_count = &vsc85xx_get_sset_count,
.get_strings = &vsc85xx_get_strings,
.get_stats = &vsc85xx_get_stats,
+ },
},
{
.phy_id = PHY_ID_VSC8575,
.name = "Microsemi GE VSC8575 SyncE",
.phy_id_mask = 0xfffffff0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.soft_reset = &genphy_soft_reset,
.config_init = &vsc8584_config_init,
.config_aneg = &vsc85xx_config_aneg,
@@ -2647,12 +2672,14 @@ static struct phy_driver vsc85xx_driver[] = {
.get_sset_count = &vsc85xx_get_sset_count,
.get_strings = &vsc85xx_get_strings,
.get_stats = &vsc85xx_get_stats,
+ },
},
{
.phy_id = PHY_ID_VSC8582,
.name = "Microsemi GE VSC8582 SyncE",
.phy_id_mask = 0xfffffff0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.soft_reset = &genphy_soft_reset,
.config_init = &vsc8584_config_init,
.config_aneg = &vsc85xx_config_aneg,
@@ -2670,12 +2697,14 @@ static struct phy_driver vsc85xx_driver[] = {
.get_sset_count = &vsc85xx_get_sset_count,
.get_strings = &vsc85xx_get_strings,
.get_stats = &vsc85xx_get_stats,
+ },
},
{
.phy_id = PHY_ID_VSC8584,
.name = "Microsemi GE VSC8584 SyncE",
.phy_id_mask = 0xfffffff0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.soft_reset = &genphy_soft_reset,
.config_init = &vsc8584_config_init,
.config_aneg = &vsc85xx_config_aneg,
@@ -2694,6 +2723,7 @@ static struct phy_driver vsc85xx_driver[] = {
.get_strings = &vsc85xx_get_strings,
.get_stats = &vsc85xx_get_stats,
.link_change_notify = &vsc85xx_link_change_notify,
+ },
}

};
diff --git a/drivers/net/phy/mxl-gpy.c b/drivers/net/phy/mxl-gpy.c
index ea1073adc5a1..5ac5f03fb7ce 100644
--- a/drivers/net/phy/mxl-gpy.c
+++ b/drivers/net/phy/mxl-gpy.c
@@ -813,6 +813,7 @@ static struct phy_driver gpy_drivers[] = {
{
PHY_ID_MATCH_MODEL(PHY_ID_GPY2xx),
.name = "Maxlinear Ethernet GPY2xx",
+ .ops = &(const struct phy_driver_ops){
.get_features = genphy_c45_pma_read_abilities,
.config_init = gpy_config_init,
.probe = gpy_probe,
@@ -826,11 +827,13 @@ static struct phy_driver gpy_drivers[] = {
.set_wol = gpy_set_wol,
.get_wol = gpy_get_wol,
.set_loopback = gpy_loopback,
+ },
},
{
.phy_id = PHY_ID_GPY115B,
.phy_id_mask = PHY_ID_GPYx15B_MASK,
.name = "Maxlinear Ethernet GPY115B",
+ .ops = &(const struct phy_driver_ops){
.get_features = genphy_c45_pma_read_abilities,
.config_init = gpy_config_init,
.probe = gpy_probe,
@@ -844,10 +847,12 @@ static struct phy_driver gpy_drivers[] = {
.set_wol = gpy_set_wol,
.get_wol = gpy_get_wol,
.set_loopback = gpy115_loopback,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_GPY115C),
.name = "Maxlinear Ethernet GPY115C",
+ .ops = &(const struct phy_driver_ops){
.get_features = genphy_c45_pma_read_abilities,
.config_init = gpy_config_init,
.probe = gpy_probe,
@@ -861,11 +866,13 @@ static struct phy_driver gpy_drivers[] = {
.set_wol = gpy_set_wol,
.get_wol = gpy_get_wol,
.set_loopback = gpy115_loopback,
+ },
},
{
.phy_id = PHY_ID_GPY211B,
.phy_id_mask = PHY_ID_GPY21xB_MASK,
.name = "Maxlinear Ethernet GPY211B",
+ .ops = &(const struct phy_driver_ops){
.get_features = genphy_c45_pma_read_abilities,
.config_init = gpy_config_init,
.probe = gpy_probe,
@@ -879,10 +886,12 @@ static struct phy_driver gpy_drivers[] = {
.set_wol = gpy_set_wol,
.get_wol = gpy_get_wol,
.set_loopback = gpy_loopback,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_GPY211C),
.name = "Maxlinear Ethernet GPY211C",
+ .ops = &(const struct phy_driver_ops){
.get_features = genphy_c45_pma_read_abilities,
.config_init = gpy_config_init,
.probe = gpy_probe,
@@ -896,11 +905,13 @@ static struct phy_driver gpy_drivers[] = {
.set_wol = gpy_set_wol,
.get_wol = gpy_get_wol,
.set_loopback = gpy_loopback,
+ },
},
{
.phy_id = PHY_ID_GPY212B,
.phy_id_mask = PHY_ID_GPY21xB_MASK,
.name = "Maxlinear Ethernet GPY212B",
+ .ops = &(const struct phy_driver_ops){
.get_features = genphy_c45_pma_read_abilities,
.config_init = gpy_config_init,
.probe = gpy_probe,
@@ -914,10 +925,12 @@ static struct phy_driver gpy_drivers[] = {
.set_wol = gpy_set_wol,
.get_wol = gpy_get_wol,
.set_loopback = gpy_loopback,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_GPY212C),
.name = "Maxlinear Ethernet GPY212C",
+ .ops = &(const struct phy_driver_ops){
.get_features = genphy_c45_pma_read_abilities,
.config_init = gpy_config_init,
.probe = gpy_probe,
@@ -931,11 +944,13 @@ static struct phy_driver gpy_drivers[] = {
.set_wol = gpy_set_wol,
.get_wol = gpy_get_wol,
.set_loopback = gpy_loopback,
+ },
},
{
.phy_id = PHY_ID_GPY215B,
.phy_id_mask = PHY_ID_GPYx15B_MASK,
.name = "Maxlinear Ethernet GPY215B",
+ .ops = &(const struct phy_driver_ops){
.get_features = genphy_c45_pma_read_abilities,
.config_init = gpy_config_init,
.probe = gpy_probe,
@@ -949,10 +964,12 @@ static struct phy_driver gpy_drivers[] = {
.set_wol = gpy_set_wol,
.get_wol = gpy_get_wol,
.set_loopback = gpy_loopback,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_GPY215C),
.name = "Maxlinear Ethernet GPY215C",
+ .ops = &(const struct phy_driver_ops){
.get_features = genphy_c45_pma_read_abilities,
.config_init = gpy_config_init,
.probe = gpy_probe,
@@ -966,10 +983,12 @@ static struct phy_driver gpy_drivers[] = {
.set_wol = gpy_set_wol,
.get_wol = gpy_get_wol,
.set_loopback = gpy_loopback,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_GPY241B),
.name = "Maxlinear Ethernet GPY241B",
+ .ops = &(const struct phy_driver_ops){
.get_features = genphy_c45_pma_read_abilities,
.config_init = gpy_config_init,
.probe = gpy_probe,
@@ -983,10 +1002,12 @@ static struct phy_driver gpy_drivers[] = {
.set_wol = gpy_set_wol,
.get_wol = gpy_get_wol,
.set_loopback = gpy_loopback,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_GPY241BM),
.name = "Maxlinear Ethernet GPY241BM",
+ .ops = &(const struct phy_driver_ops){
.get_features = genphy_c45_pma_read_abilities,
.config_init = gpy_config_init,
.probe = gpy_probe,
@@ -1000,10 +1021,12 @@ static struct phy_driver gpy_drivers[] = {
.set_wol = gpy_set_wol,
.get_wol = gpy_get_wol,
.set_loopback = gpy_loopback,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_GPY245B),
.name = "Maxlinear Ethernet GPY245B",
+ .ops = &(const struct phy_driver_ops){
.get_features = genphy_c45_pma_read_abilities,
.config_init = gpy_config_init,
.probe = gpy_probe,
@@ -1017,6 +1040,7 @@ static struct phy_driver gpy_drivers[] = {
.set_wol = gpy_set_wol,
.get_wol = gpy_get_wol,
.set_loopback = gpy_loopback,
+ },
},
};
module_phy_driver(gpy_drivers);
diff --git a/drivers/net/phy/national.c b/drivers/net/phy/national.c
index 9ae9cc6b23c2..acdf6477b304 100644
--- a/drivers/net/phy/national.c
+++ b/drivers/net/phy/national.c
@@ -162,9 +162,11 @@ static struct phy_driver dp83865_driver[] = { {
.phy_id_mask = 0xfffffff0,
.name = "NatSemi DP83865",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = ns_config_init,
.config_intr = ns_config_intr,
.handle_interrupt = ns_handle_interrupt,
+ },
} };

module_phy_driver(dp83865_driver);
diff --git a/drivers/net/phy/ncn26000.c b/drivers/net/phy/ncn26000.c
index 5680584f659e..56fae7e36611 100644
--- a/drivers/net/phy/ncn26000.c
+++ b/drivers/net/phy/ncn26000.c
@@ -145,6 +145,7 @@ static struct phy_driver ncn26000_driver[] = {
PHY_ID_MATCH_MODEL(PHY_ID_NCN26000),
.name = "NCN26000",
.features = PHY_BASIC_T1S_P2MP_FEATURES,
+ .ops = &(const struct phy_driver_ops){
.config_init = ncn26000_config_init,
.config_intr = ncn26000_config_intr,
.config_aneg = ncn26000_config_aneg,
@@ -154,6 +155,7 @@ static struct phy_driver ncn26000_driver[] = {
.set_plca_cfg = genphy_c45_plca_set_cfg,
.get_plca_status = genphy_c45_plca_get_status,
.soft_reset = genphy_soft_reset,
+ },
},
};

diff --git a/drivers/net/phy/nxp-c45-tja11xx.c b/drivers/net/phy/nxp-c45-tja11xx.c
index 3cf614b4cd52..4cd410d56277 100644
--- a/drivers/net/phy/nxp-c45-tja11xx.c
+++ b/drivers/net/phy/nxp-c45-tja11xx.c
@@ -1929,8 +1929,9 @@ static struct phy_driver nxp_c45_driver[] = {
{
PHY_ID_MATCH_MODEL(PHY_ID_TJA_1103),
.name = "NXP C45 TJA1103",
- .get_features = nxp_c45_get_features,
.driver_data = &tja1103_phy_data,
+ .ops = &(const struct phy_driver_ops){
+ .get_features = nxp_c45_get_features,
.probe = nxp_c45_probe,
.soft_reset = nxp_c45_soft_reset,
.config_aneg = genphy_c45_config_aneg,
@@ -1949,12 +1950,14 @@ static struct phy_driver nxp_c45_driver[] = {
.get_sqi = nxp_c45_get_sqi,
.get_sqi_max = nxp_c45_get_sqi_max,
.remove = nxp_c45_remove,
+ },
},
{
PHY_ID_MATCH_MODEL(PHY_ID_TJA_1120),
.name = "NXP C45 TJA1120",
- .get_features = nxp_c45_get_features,
.driver_data = &tja1120_phy_data,
+ .ops = &(const struct phy_driver_ops){
+ .get_features = nxp_c45_get_features,
.probe = nxp_c45_probe,
.soft_reset = nxp_c45_soft_reset,
.config_aneg = genphy_c45_config_aneg,
@@ -1974,6 +1977,7 @@ static struct phy_driver nxp_c45_driver[] = {
.get_sqi = nxp_c45_get_sqi,
.get_sqi_max = nxp_c45_get_sqi_max,
.remove = nxp_c45_remove,
+ },
},
};

diff --git a/drivers/net/phy/nxp-cbtx.c b/drivers/net/phy/nxp-cbtx.c
index 145703f0a406..5f2b6513d2ad 100644
--- a/drivers/net/phy/nxp-cbtx.c
+++ b/drivers/net/phy/nxp-cbtx.c
@@ -199,6 +199,7 @@ static struct phy_driver cbtx_driver[] = {
PHY_ID_MATCH_MODEL(PHY_ID_CBTX_SJA1110),
.name = "NXP CBTX (SJA1110)",
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.soft_reset = cbtx_soft_reset,
.config_init = cbtx_config_init,
.suspend = genphy_suspend,
@@ -210,6 +211,7 @@ static struct phy_driver cbtx_driver[] = {
.get_sset_count = cbtx_get_sset_count,
.get_strings = cbtx_get_strings,
.get_stats = cbtx_get_stats,
+ },
},
};

diff --git a/drivers/net/phy/nxp-tja11xx.c b/drivers/net/phy/nxp-tja11xx.c
index 2c263ae44b4f..66e0f9fca2da 100644
--- a/drivers/net/phy/nxp-tja11xx.c
+++ b/drivers/net/phy/nxp-tja11xx.c
@@ -205,22 +205,22 @@ static int tja11xx_config_aneg_cable_test(struct phy_device *phydev)
if (phydev->link)
return 0;

- if (!phydev->drv->cable_test_start ||
- !phydev->drv->cable_test_get_status)
+ if (!phydev->drv->ops->cable_test_start ||
+ !phydev->drv->ops->cable_test_get_status)
return 0;

ret = ethnl_cable_test_alloc(phydev, ETHTOOL_MSG_CABLE_TEST_NTF);
if (ret)
return ret;

- ret = phydev->drv->cable_test_start(phydev);
+ ret = phydev->drv->ops->cable_test_start(phydev);
if (ret)
return ret;

/* According to the documentation this test takes 100 usec */
usleep_range(100, 200);

- ret = phydev->drv->cable_test_get_status(phydev, &finished);
+ ret = phydev->drv->ops->cable_test_get_status(phydev, &finished);
if (ret)
return ret;

@@ -805,6 +805,7 @@ static struct phy_driver tja11xx_driver[] = {
PHY_ID_MATCH_MODEL(PHY_ID_TJA1100),
.name = "NXP TJA1100",
.features = PHY_BASIC_T1_FEATURES,
+ .ops = &(const struct phy_driver_ops){
.probe = tja11xx_probe,
.soft_reset = tja11xx_soft_reset,
.config_aneg = tja11xx_config_aneg,
@@ -819,10 +820,12 @@ static struct phy_driver tja11xx_driver[] = {
.get_sset_count = tja11xx_get_sset_count,
.get_strings = tja11xx_get_strings,
.get_stats = tja11xx_get_stats,
+ },
}, {
PHY_ID_MATCH_MODEL(PHY_ID_TJA1101),
.name = "NXP TJA1101",
.features = PHY_BASIC_T1_FEATURES,
+ .ops = &(const struct phy_driver_ops){
.probe = tja11xx_probe,
.soft_reset = tja11xx_soft_reset,
.config_aneg = tja11xx_config_aneg,
@@ -837,10 +840,12 @@ static struct phy_driver tja11xx_driver[] = {
.get_sset_count = tja11xx_get_sset_count,
.get_strings = tja11xx_get_strings,
.get_stats = tja11xx_get_stats,
+ },
}, {
.name = "NXP TJA1102 Port 0",
.features = PHY_BASIC_T1_FEATURES,
.flags = PHY_POLL_CABLE_TEST,
+ .ops = &(const struct phy_driver_ops){
.probe = tja1102_p0_probe,
.soft_reset = tja11xx_soft_reset,
.config_aneg = tja11xx_config_aneg,
@@ -860,11 +865,13 @@ static struct phy_driver tja11xx_driver[] = {
.handle_interrupt = tja11xx_handle_interrupt,
.cable_test_start = tja11xx_cable_test_start,
.cable_test_get_status = tja11xx_cable_test_get_status,
+ },
}, {
.name = "NXP TJA1102 Port 1",
.features = PHY_BASIC_T1_FEATURES,
.flags = PHY_POLL_CABLE_TEST,
/* currently no probe for Port 1 is need */
+ .ops = &(const struct phy_driver_ops){
.soft_reset = tja11xx_soft_reset,
.config_aneg = tja11xx_config_aneg,
.config_init = tja11xx_config_init,
@@ -883,6 +890,7 @@ static struct phy_driver tja11xx_driver[] = {
.handle_interrupt = tja11xx_handle_interrupt,
.cable_test_start = tja11xx_cable_test_start,
.cable_test_get_status = tja11xx_cable_test_get_status,
+ },
}
};

diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c
index 46c87a903efd..9e7e72062335 100644
--- a/drivers/net/phy/phy-c45.c
+++ b/drivers/net/phy/phy-c45.c
@@ -1522,5 +1522,7 @@ struct phy_driver genphy_c45_driver = {
.phy_id = 0xffffffff,
.phy_id_mask = 0xffffffff,
.name = "Generic Clause 45 PHY",
+ .ops = &(const struct phy_driver_ops){
.read_status = genphy_c45_read_status,
+ },
};
diff --git a/drivers/net/phy/phy-core.c b/drivers/net/phy/phy-core.c
index 15f349e5995a..0dcd8d5934ef 100644
--- a/drivers/net/phy/phy-core.c
+++ b/drivers/net/phy/phy-core.c
@@ -576,8 +576,8 @@ int __phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum)
if (regnum > (u16)~0 || devad > 32)
return -EINVAL;

- if (phydev->drv && phydev->drv->read_mmd)
- return phydev->drv->read_mmd(phydev, devad, regnum);
+ if (phydev->drv && phydev->drv->ops && phydev->drv->ops->read_mmd)
+ return phydev->drv->ops->read_mmd(phydev, devad, regnum);

return mmd_phy_read(phydev->mdio.bus, phydev->mdio.addr,
phydev->is_c45, devad, regnum);
@@ -620,8 +620,8 @@ int __phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val)
if (regnum > (u16)~0 || devad > 32)
return -EINVAL;

- if (phydev->drv && phydev->drv->write_mmd)
- return phydev->drv->write_mmd(phydev, devad, regnum, val);
+ if (phydev->drv && phydev->drv->ops && phydev->drv->ops->write_mmd)
+ return phydev->drv->ops->write_mmd(phydev, devad, regnum, val);

return mmd_phy_write(phydev->mdio.bus, phydev->mdio.addr,
phydev->is_c45, devad, regnum, val);
@@ -968,18 +968,20 @@ EXPORT_SYMBOL_GPL(phy_modify_mmd);

static int __phy_read_page(struct phy_device *phydev)
{
- if (WARN_ONCE(!phydev->drv->read_page, "read_page callback not available, PHY driver not loaded?\n"))
+ if (WARN_ONCE(!phydev->drv->ops || !phydev->drv->ops->read_page,
+ "read_page callback not available, PHY driver not loaded?\n"))
return -EOPNOTSUPP;

- return phydev->drv->read_page(phydev);
+ return phydev->drv->ops->read_page(phydev);
}

static int __phy_write_page(struct phy_device *phydev, int page)
{
- if (WARN_ONCE(!phydev->drv->write_page, "write_page callback not available, PHY driver not loaded?\n"))
+ if (WARN_ONCE(!phydev->drv->ops || !phydev->drv->ops->write_page,
+ "write_page callback not available, PHY driver not loaded?\n"))
return -EOPNOTSUPP;

- return phydev->drv->write_page(phydev, page);
+ return phydev->drv->ops->write_page(phydev, page);
}

/**
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 14224e06d69f..185a8c60de54 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -65,8 +65,9 @@ static void phy_process_state_change(struct phy_device *phydev,
phydev_dbg(phydev, "PHY state change %s -> %s\n",
phy_state_to_str(old_state),
phy_state_to_str(phydev->state));
- if (phydev->drv && phydev->drv->link_change_notify)
- phydev->drv->link_change_notify(phydev);
+ if (phydev->drv && phydev->drv->ops &&
+ phydev->drv->ops->link_change_notify)
+ phydev->drv->ops->link_change_notify(phydev);
}
}

@@ -145,9 +146,9 @@ int phy_get_rate_matching(struct phy_device *phydev,
{
int ret = RATE_MATCH_NONE;

- if (phydev->drv->get_rate_matching) {
+ if (phydev->drv->ops && phydev->drv->ops->get_rate_matching) {
mutex_lock(&phydev->lock);
- ret = phydev->drv->get_rate_matching(phydev, iface);
+ ret = phydev->drv->ops->get_rate_matching(phydev, iface);
mutex_unlock(&phydev->lock);
}

@@ -165,8 +166,8 @@ EXPORT_SYMBOL_GPL(phy_get_rate_matching);
static int phy_config_interrupt(struct phy_device *phydev, bool interrupts)
{
phydev->interrupts = interrupts ? 1 : 0;
- if (phydev->drv->config_intr)
- return phydev->drv->config_intr(phydev);
+ if (phydev->drv->ops && phydev->drv->ops->config_intr)
+ return phydev->drv->ops->config_intr(phydev);

return 0;
}
@@ -201,8 +202,8 @@ EXPORT_SYMBOL_GPL(phy_restart_aneg);
*/
int phy_aneg_done(struct phy_device *phydev)
{
- if (phydev->drv && phydev->drv->aneg_done)
- return phydev->drv->aneg_done(phydev);
+ if (phydev->drv && phydev->drv->ops && phydev->drv->ops->aneg_done)
+ return phydev->drv->ops->aneg_done(phydev);
else if (phydev->is_c45)
return genphy_c45_aneg_done(phydev);
else
@@ -552,11 +553,11 @@ static void phy_abort_cable_test(struct phy_device *phydev)
*/
int phy_ethtool_get_strings(struct phy_device *phydev, u8 *data)
{
- if (!phydev->drv)
+ if (!phydev->drv || !phydev->drv->ops)
return -EIO;

mutex_lock(&phydev->lock);
- phydev->drv->get_strings(phydev, data);
+ phydev->drv->ops->get_strings(phydev, data);
mutex_unlock(&phydev->lock);

return 0;
@@ -572,14 +573,14 @@ int phy_ethtool_get_sset_count(struct phy_device *phydev)
{
int ret;

- if (!phydev->drv)
+ if (!phydev->drv || !phydev->drv->ops)
return -EIO;

- if (phydev->drv->get_sset_count &&
- phydev->drv->get_strings &&
- phydev->drv->get_stats) {
+ if (phydev->drv->ops->get_sset_count &&
+ phydev->drv->ops->get_strings &&
+ phydev->drv->ops->get_stats) {
mutex_lock(&phydev->lock);
- ret = phydev->drv->get_sset_count(phydev);
+ ret = phydev->drv->ops->get_sset_count(phydev);
mutex_unlock(&phydev->lock);

return ret;
@@ -599,11 +600,11 @@ EXPORT_SYMBOL(phy_ethtool_get_sset_count);
int phy_ethtool_get_stats(struct phy_device *phydev,
struct ethtool_stats *stats, u64 *data)
{
- if (!phydev->drv)
+ if (!phydev->drv || !phydev->drv->ops)
return -EIO;

mutex_lock(&phydev->lock);
- phydev->drv->get_stats(phydev, stats, data);
+ phydev->drv->ops->get_stats(phydev, stats, data);
mutex_unlock(&phydev->lock);

return 0;
@@ -628,13 +629,13 @@ int phy_ethtool_get_plca_cfg(struct phy_device *phydev,
goto out;
}

- if (!phydev->drv->get_plca_cfg) {
+ if (!phydev->drv->ops || phydev->drv->ops->get_plca_cfg) {
ret = -EOPNOTSUPP;
goto out;
}

mutex_lock(&phydev->lock);
- ret = phydev->drv->get_plca_cfg(phydev, plca_cfg);
+ ret = phydev->drv->ops->get_plca_cfg(phydev, plca_cfg);

mutex_unlock(&phydev->lock);
out:
@@ -691,8 +692,9 @@ int phy_ethtool_set_plca_cfg(struct phy_device *phydev,
goto out;
}

- if (!phydev->drv->set_plca_cfg ||
- !phydev->drv->get_plca_cfg) {
+ if (!phydev->drv->ops ||
+ !phydev->drv->ops->set_plca_cfg ||
+ !phydev->drv->ops->get_plca_cfg) {
ret = -EOPNOTSUPP;
goto out;
}
@@ -705,7 +707,7 @@ int phy_ethtool_set_plca_cfg(struct phy_device *phydev,

mutex_lock(&phydev->lock);

- ret = phydev->drv->get_plca_cfg(phydev, curr_plca_cfg);
+ ret = phydev->drv->ops->get_plca_cfg(phydev, curr_plca_cfg);
if (ret)
goto out_drv;

@@ -762,7 +764,7 @@ int phy_ethtool_set_plca_cfg(struct phy_device *phydev,
goto out_drv;
}

- ret = phydev->drv->set_plca_cfg(phydev, plca_cfg);
+ ret = phydev->drv->ops->set_plca_cfg(phydev, plca_cfg);

out_drv:
kfree(curr_plca_cfg);
@@ -789,13 +791,14 @@ int phy_ethtool_get_plca_status(struct phy_device *phydev,
goto out;
}

- if (!phydev->drv->get_plca_status) {
+ if (!phydev->drv->ops ||
+ !phydev->drv->ops->get_plca_status) {
ret = -EOPNOTSUPP;
goto out;
}

mutex_lock(&phydev->lock);
- ret = phydev->drv->get_plca_status(phydev, plca_st);
+ ret = phydev->drv->ops->get_plca_status(phydev, plca_st);

mutex_unlock(&phydev->lock);
out:
@@ -814,9 +817,9 @@ int phy_start_cable_test(struct phy_device *phydev,
struct net_device *dev = phydev->attached_dev;
int err = -ENOMEM;

- if (!(phydev->drv &&
- phydev->drv->cable_test_start &&
- phydev->drv->cable_test_get_status)) {
+ if (!(phydev->drv && phydev->drv->ops &&
+ phydev->drv->ops->cable_test_start &&
+ phydev->drv->ops->cable_test_get_status)) {
NL_SET_ERR_MSG(extack,
"PHY driver does not support cable testing");
return -EOPNOTSUPP;
@@ -846,7 +849,7 @@ int phy_start_cable_test(struct phy_device *phydev,
phy_link_down(phydev);

netif_testing_on(dev);
- err = phydev->drv->cable_test_start(phydev);
+ err = phydev->drv->ops->cable_test_start(phydev);
if (err) {
netif_testing_off(dev);
phy_link_up(phydev);
@@ -885,9 +888,9 @@ int phy_start_cable_test_tdr(struct phy_device *phydev,
struct net_device *dev = phydev->attached_dev;
int err = -ENOMEM;

- if (!(phydev->drv &&
- phydev->drv->cable_test_tdr_start &&
- phydev->drv->cable_test_get_status)) {
+ if (!(phydev->drv && phydev->drv->ops &&
+ phydev->drv->ops->cable_test_tdr_start &&
+ phydev->drv->ops->cable_test_get_status)) {
NL_SET_ERR_MSG(extack,
"PHY driver does not support cable test TDR");
return -EOPNOTSUPP;
@@ -917,7 +920,7 @@ int phy_start_cable_test_tdr(struct phy_device *phydev,
phy_link_down(phydev);

netif_testing_on(dev);
- err = phydev->drv->cable_test_tdr_start(phydev, config);
+ err = phydev->drv->ops->cable_test_tdr_start(phydev, config);
if (err) {
netif_testing_off(dev);
phy_link_up(phydev);
@@ -944,8 +947,8 @@ EXPORT_SYMBOL(phy_start_cable_test_tdr);

int phy_config_aneg(struct phy_device *phydev)
{
- if (phydev->drv->config_aneg)
- return phydev->drv->config_aneg(phydev);
+ if (phydev->drv->ops && phydev->drv->ops->config_aneg)
+ return phydev->drv->ops->config_aneg(phydev);

/* Clause 45 PHYs that don't implement Clause 22 registers are not
* allowed to call genphy_config_aneg()
@@ -1315,7 +1318,7 @@ static irqreturn_t phy_interrupt(int irq, void *phy_dat)
}

mutex_lock(&phydev->lock);
- ret = phydev->drv->handle_interrupt(phydev);
+ ret = phydev->drv->ops->handle_interrupt(phydev);
mutex_unlock(&phydev->lock);

return ret;
@@ -1401,7 +1404,7 @@ static enum phy_state_work _phy_state_machine(struct phy_device *phydev)
func = &phy_check_link_status;
break;
case PHY_CABLETEST:
- err = phydev->drv->cable_test_get_status(phydev, &finished);
+ err = phydev->drv->ops->cable_test_get_status(phydev, &finished);
if (err) {
phy_abort_cable_test(phydev);
netif_testing_off(dev);
@@ -1683,9 +1686,9 @@ int phy_ethtool_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
{
int ret;

- if (phydev->drv && phydev->drv->set_wol) {
+ if (phydev->drv && phydev->drv->ops && phydev->drv->ops->set_wol) {
mutex_lock(&phydev->lock);
- ret = phydev->drv->set_wol(phydev, wol);
+ ret = phydev->drv->ops->set_wol(phydev, wol);
mutex_unlock(&phydev->lock);

return ret;
@@ -1703,9 +1706,9 @@ EXPORT_SYMBOL(phy_ethtool_set_wol);
*/
void phy_ethtool_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
{
- if (phydev->drv && phydev->drv->get_wol) {
+ if (phydev->drv && phydev->drv->ops && phydev->drv->ops->get_wol) {
mutex_lock(&phydev->lock);
- phydev->drv->get_wol(phydev, wol);
+ phydev->drv->ops->get_wol(phydev, wol);
mutex_unlock(&phydev->lock);
}
}
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index d63dca535746..2f4e28416726 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -274,7 +274,7 @@ static bool mdio_bus_phy_may_suspend(struct phy_device *phydev)
struct phy_driver *phydrv = to_phy_driver(drv);
struct net_device *netdev = phydev->attached_dev;

- if (!drv || !phydrv->suspend)
+ if (!drv || !phydrv->ops || !phydrv->ops->suspend)
return false;

/* PHY not attached? May suspend if the PHY has not already been
@@ -532,8 +532,8 @@ static int phy_bus_match(struct device *dev, struct device_driver *drv)
if (!(phydrv->mdiodrv.flags & MDIO_DEVICE_IS_PHY))
return 0;

- if (phydrv->match_phy_device)
- return phydrv->match_phy_device(phydev);
+ if (phydrv->ops && phydrv->ops->match_phy_device)
+ return phydrv->ops->match_phy_device(phydev);

if (phydev->is_c45) {
for (i = 1; i < num_ids; i++) {
@@ -1235,11 +1235,11 @@ int phy_init_hw(struct phy_device *phydev)
/* Deassert the reset signal */
phy_device_reset(phydev, 0);

- if (!phydev->drv)
+ if (!phydev->drv || !phydev->drv->ops)
return 0;

- if (phydev->drv->soft_reset) {
- ret = phydev->drv->soft_reset(phydev);
+ if (phydev->drv->ops->soft_reset) {
+ ret = phydev->drv->ops->soft_reset(phydev);
if (ret < 0)
return ret;

@@ -1253,14 +1253,14 @@ int phy_init_hw(struct phy_device *phydev)

phy_interface_zero(phydev->possible_interfaces);

- if (phydev->drv->config_init) {
- ret = phydev->drv->config_init(phydev);
+ if (phydev->drv->ops->config_init) {
+ ret = phydev->drv->ops->config_init(phydev);
if (ret < 0)
return ret;
}

- if (phydev->drv->config_intr) {
- ret = phydev->drv->config_intr(phydev);
+ if (phydev->drv->ops->config_intr) {
+ ret = phydev->drv->ops->config_intr(phydev);
if (ret < 0)
return ret;
}
@@ -1419,7 +1419,7 @@ EXPORT_SYMBOL(phy_sfp_probe);

static bool phy_drv_supports_irq(const struct phy_driver *phydrv)
{
- return phydrv->config_intr && phydrv->handle_interrupt;
+ return phydrv->ops && phydrv->ops->config_intr && phydrv->ops->handle_interrupt;
}

/**
@@ -1978,10 +1978,10 @@ int phy_suspend(struct phy_device *phydev)
if (phydev->wol_enabled && !(phydrv->flags & PHY_ALWAYS_CALL_SUSPEND))
return -EBUSY;

- if (!phydrv || !phydrv->suspend)
+ if (!phydrv || !phydrv->ops || !phydrv->ops->suspend)
return 0;

- ret = phydrv->suspend(phydev);
+ ret = phydrv->ops->suspend(phydev);
if (!ret)
phydev->suspended = true;

@@ -1996,10 +1996,10 @@ int __phy_resume(struct phy_device *phydev)

lockdep_assert_held(&phydev->lock);

- if (!phydrv || !phydrv->resume)
+ if (!phydrv || !phydrv->ops || !phydrv->ops->resume)
return 0;

- ret = phydrv->resume(phydev);
+ ret = phydrv->ops->resume(phydev);
if (!ret)
phydev->suspended = false;

@@ -2038,8 +2038,8 @@ int phy_loopback(struct phy_device *phydev, bool enable)
goto out;
}

- if (phydev->drv->set_loopback)
- ret = phydev->drv->set_loopback(phydev, enable);
+ if (phydev->drv->ops && phydev->drv->ops->set_loopback)
+ ret = phydev->drv->ops->set_loopback(phydev, enable);
else
ret = genphy_loopback(phydev, enable);

@@ -3130,7 +3130,7 @@ static int phy_led_set_brightness(struct led_classdev *led_cdev,
int err;

mutex_lock(&phydev->lock);
- err = phydev->drv->led_brightness_set(phydev, phyled->index, value);
+ err = phydev->drv->ops->led_brightness_set(phydev, phyled->index, value);
mutex_unlock(&phydev->lock);

return err;
@@ -3145,8 +3145,8 @@ static int phy_led_blink_set(struct led_classdev *led_cdev,
int err;

mutex_lock(&phydev->lock);
- err = phydev->drv->led_blink_set(phydev, phyled->index,
- delay_on, delay_off);
+ err = phydev->drv->ops->led_blink_set(phydev, phyled->index,
+ delay_on, delay_off);
mutex_unlock(&phydev->lock);

return err;
@@ -3172,7 +3172,7 @@ phy_led_hw_control_get(struct led_classdev *led_cdev,
int err;

mutex_lock(&phydev->lock);
- err = phydev->drv->led_hw_control_get(phydev, phyled->index, rules);
+ err = phydev->drv->ops->led_hw_control_get(phydev, phyled->index, rules);
mutex_unlock(&phydev->lock);

return err;
@@ -3187,7 +3187,7 @@ phy_led_hw_control_set(struct led_classdev *led_cdev,
int err;

mutex_lock(&phydev->lock);
- err = phydev->drv->led_hw_control_set(phydev, phyled->index, rules);
+ err = phydev->drv->ops->led_hw_control_set(phydev, phyled->index, rules);
mutex_unlock(&phydev->lock);

return err;
@@ -3201,7 +3201,7 @@ static __maybe_unused int phy_led_hw_is_supported(struct led_classdev *led_cdev,
int err;

mutex_lock(&phydev->lock);
- err = phydev->drv->led_hw_is_supported(phydev, phyled->index, rules);
+ err = phydev->drv->ops->led_hw_is_supported(phydev, phyled->index, rules);
mutex_unlock(&phydev->lock);

return err;
@@ -3247,24 +3247,25 @@ static int of_phy_led(struct phy_device *phydev,

if (modes) {
/* Return error if asked to set polarity modes but not supported */
- if (!phydev->drv->led_polarity_set)
+ if (phydev->drv->ops && !phydev->drv->ops->led_polarity_set)
return -EINVAL;

- err = phydev->drv->led_polarity_set(phydev, index, modes);
+ err = phydev->drv->ops->led_polarity_set(phydev, index, modes);
if (err)
return err;
}

phyled->index = index;
- if (phydev->drv->led_brightness_set)
+ if (phydev->drv->ops && phydev->drv->ops->led_brightness_set)
cdev->brightness_set_blocking = phy_led_set_brightness;
- if (phydev->drv->led_blink_set)
+ if (phydev->drv->ops && phydev->drv->ops->led_blink_set)
cdev->blink_set = phy_led_blink_set;

#ifdef CONFIG_LEDS_TRIGGERS
- if (phydev->drv->led_hw_is_supported &&
- phydev->drv->led_hw_control_set &&
- phydev->drv->led_hw_control_get) {
+ if (phydev->drv->ops &&
+ phydev->drv->ops->led_hw_is_supported &&
+ phydev->drv->ops->led_hw_control_set &&
+ phydev->drv->ops->led_hw_control_get) {
cdev->hw_control_is_supported = phy_led_hw_is_supported;
cdev->hw_control_set = phy_led_hw_control_set;
cdev->hw_control_get = phy_led_hw_control_get;
@@ -3426,8 +3427,8 @@ static int phy_probe(struct device *dev)
/* Deassert the reset signal */
phy_device_reset(phydev, 0);

- if (phydev->drv->probe) {
- err = phydev->drv->probe(phydev);
+ if (phydev->drv->ops && phydev->drv->ops->probe) {
+ err = phydev->drv->ops->probe(phydev);
if (err)
goto out;
}
@@ -3441,9 +3442,8 @@ static int phy_probe(struct device *dev)
if (phydrv->features) {
linkmode_copy(phydev->supported, phydrv->features);
genphy_c45_read_eee_abilities(phydev);
- }
- else if (phydrv->get_features)
- err = phydrv->get_features(phydev);
+ } else if (phydev->drv->ops && phydrv->ops->get_features)
+ err = phydrv->ops->get_features(phydev);
else if (phydev->is_c45)
err = genphy_c45_pma_read_abilities(phydev);
else
@@ -3540,8 +3540,9 @@ static int phy_remove(struct device *dev)
sfp_bus_del_upstream(phydev->sfp_bus);
phydev->sfp_bus = NULL;

- if (phydev->drv && phydev->drv->remove)
- phydev->drv->remove(phydev);
+ if (phydev->drv && phydev->drv->ops &&
+ phydev->drv->ops->remove)
+ phydev->drv->ops->remove(phydev);

/* Assert the reset signal */
phy_device_reset(phydev, 1);
@@ -3563,7 +3564,7 @@ int phy_driver_register(struct phy_driver *new_driver, struct module *owner)
/* Either the features are hard coded, or dynamically
* determined. It cannot be both.
*/
- if (WARN_ON(new_driver->features && new_driver->get_features)) {
+ if (WARN_ON(new_driver->features && new_driver->ops && new_driver->ops->get_features)) {
pr_err("%s: features and get_features must not both be set\n",
new_driver->name);
return -EINVAL;
@@ -3637,10 +3638,12 @@ static struct phy_driver genphy_driver = {
.phy_id = 0xffffffff,
.phy_id_mask = 0xffffffff,
.name = "Generic PHY",
+ .ops = &(const struct phy_driver_ops){
.get_features = genphy_read_abilities,
.suspend = genphy_suspend,
.resume = genphy_resume,
.set_loopback = genphy_loopback,
+ },
};

static const struct ethtool_phy_ops phy_ethtool_phy_ops = {
diff --git a/drivers/net/phy/qcom/at803x.c b/drivers/net/phy/qcom/at803x.c
index 4717c59d51d0..96666c5d58e0 100644
--- a/drivers/net/phy/qcom/at803x.c
+++ b/drivers/net/phy/qcom/at803x.c
@@ -988,6 +988,7 @@ static struct phy_driver at803x_driver[] = {
PHY_ID_MATCH_EXACT(ATH8035_PHY_ID),
.name = "Qualcomm Atheros AR8035",
.flags = PHY_POLL_CABLE_TEST,
+ .ops = &(const struct phy_driver_ops){
.probe = at8035_probe,
.config_aneg = at803x_config_aneg,
.config_init = at803x_config_init,
@@ -1004,11 +1005,13 @@ static struct phy_driver at803x_driver[] = {
.set_tunable = at803x_set_tunable,
.cable_test_start = at8031_cable_test_start,
.cable_test_get_status = at8031_cable_test_get_status,
+ },
}, {
/* Qualcomm Atheros AR8030 */
.phy_id = ATH8030_PHY_ID,
.name = "Qualcomm Atheros AR8030",
.phy_id_mask = AT8030_PHY_ID_MASK,
+ .ops = &(const struct phy_driver_ops){
.probe = at8035_probe,
.config_init = at803x_config_init,
.link_change_notify = at803x_link_change_notify,
@@ -1019,11 +1022,13 @@ static struct phy_driver at803x_driver[] = {
/* PHY_BASIC_FEATURES */
.config_intr = at803x_config_intr,
.handle_interrupt = at803x_handle_interrupt,
+ },
}, {
/* Qualcomm Atheros AR8031/AR8033 */
PHY_ID_MATCH_EXACT(ATH8031_PHY_ID),
.name = "Qualcomm Atheros AR8031/AR8033",
.flags = PHY_POLL_CABLE_TEST,
+ .ops = &(const struct phy_driver_ops){
.probe = at8031_probe,
.config_init = at8031_config_init,
.config_aneg = at803x_config_aneg,
@@ -1042,12 +1047,14 @@ static struct phy_driver at803x_driver[] = {
.set_tunable = at803x_set_tunable,
.cable_test_start = at8031_cable_test_start,
.cable_test_get_status = at8031_cable_test_get_status,
+ },
}, {
/* Qualcomm Atheros AR8032 */
PHY_ID_MATCH_EXACT(ATH8032_PHY_ID),
.name = "Qualcomm Atheros AR8032",
- .probe = at803x_probe,
.flags = PHY_POLL_CABLE_TEST,
+ .ops = &(const struct phy_driver_ops){
+ .probe = at803x_probe,
.config_init = at803x_config_init,
.link_change_notify = at803x_link_change_notify,
.suspend = at803x_suspend,
@@ -1057,14 +1064,16 @@ static struct phy_driver at803x_driver[] = {
.handle_interrupt = at803x_handle_interrupt,
.cable_test_start = at803x_cable_test_start,
.cable_test_get_status = at8032_cable_test_get_status,
+ },
}, {
/* ATHEROS AR9331 */
PHY_ID_MATCH_EXACT(ATH9331_PHY_ID),
.name = "Qualcomm Atheros AR9331 built-in PHY",
+ .flags = PHY_POLL_CABLE_TEST,
+ .ops = &(const struct phy_driver_ops){
.probe = at803x_probe,
.suspend = at803x_suspend,
.resume = at803x_resume,
- .flags = PHY_POLL_CABLE_TEST,
/* PHY_BASIC_FEATURES */
.config_intr = at803x_config_intr,
.handle_interrupt = at803x_handle_interrupt,
@@ -1073,14 +1082,16 @@ static struct phy_driver at803x_driver[] = {
.read_status = at803x_read_status,
.soft_reset = genphy_soft_reset,
.config_aneg = at803x_config_aneg,
+ },
}, {
/* Qualcomm Atheros QCA9561 */
PHY_ID_MATCH_EXACT(QCA9561_PHY_ID),
.name = "Qualcomm Atheros QCA9561 built-in PHY",
+ .flags = PHY_POLL_CABLE_TEST,
+ .ops = &(const struct phy_driver_ops){
.probe = at803x_probe,
.suspend = at803x_suspend,
.resume = at803x_resume,
- .flags = PHY_POLL_CABLE_TEST,
/* PHY_BASIC_FEATURES */
.config_intr = at803x_config_intr,
.handle_interrupt = at803x_handle_interrupt,
@@ -1089,6 +1100,7 @@ static struct phy_driver at803x_driver[] = {
.read_status = at803x_read_status,
.soft_reset = genphy_soft_reset,
.config_aneg = at803x_config_aneg,
+ },
}, };

module_phy_driver(at803x_driver);
diff --git a/drivers/net/phy/qcom/qca807x.c b/drivers/net/phy/qcom/qca807x.c
index 780c28e2e4aa..9ff9a8a062a9 100644
--- a/drivers/net/phy/qcom/qca807x.c
+++ b/drivers/net/phy/qcom/qca807x.c
@@ -797,6 +797,7 @@ static struct phy_driver qca807x_drivers[] = {
.name = "Qualcomm QCA8072",
.flags = PHY_POLL_CABLE_TEST,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.probe = qca807x_probe,
.config_init = qca807x_config_init,
.read_status = qca807x_read_status,
@@ -809,12 +810,14 @@ static struct phy_driver qca807x_drivers[] = {
.suspend = genphy_suspend,
.cable_test_start = qca807x_cable_test_start,
.cable_test_get_status = qca808x_cable_test_get_status,
+ },
},
{
PHY_ID_MATCH_EXACT(PHY_ID_QCA8075),
.name = "Qualcomm QCA8075",
.flags = PHY_POLL_CABLE_TEST,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.probe = qca807x_probe,
.config_init = qca807x_config_init,
.read_status = qca807x_read_status,
@@ -832,6 +835,7 @@ static struct phy_driver qca807x_drivers[] = {
.led_hw_is_supported = qca807x_led_hw_is_supported,
.led_hw_control_set = qca807x_led_hw_control_set,
.led_hw_control_get = qca807x_led_hw_control_get,
+ },
},
};
module_phy_driver(qca807x_drivers);
diff --git a/drivers/net/phy/qcom/qca808x.c b/drivers/net/phy/qcom/qca808x.c
index 2acf852fb4de..5aee2529f329 100644
--- a/drivers/net/phy/qcom/qca808x.c
+++ b/drivers/net/phy/qcom/qca808x.c
@@ -609,6 +609,7 @@ static struct phy_driver qca808x_driver[] = {
PHY_ID_MATCH_EXACT(QCA8081_PHY_ID),
.name = "Qualcomm QCA8081",
.flags = PHY_POLL_CABLE_TEST,
+ .ops = &(const struct phy_driver_ops){
.probe = qca808x_probe,
.config_intr = at803x_config_intr,
.handle_interrupt = at803x_handle_interrupt,
@@ -632,6 +633,7 @@ static struct phy_driver qca808x_driver[] = {
.led_hw_control_set = qca808x_led_hw_control_set,
.led_hw_control_get = qca808x_led_hw_control_get,
.led_polarity_set = qca808x_led_polarity_set,
+ },
}, };

module_phy_driver(qca808x_driver);
diff --git a/drivers/net/phy/qcom/qca83xx.c b/drivers/net/phy/qcom/qca83xx.c
index 5d083ef0250e..6630c0e6de90 100644
--- a/drivers/net/phy/qcom/qca83xx.c
+++ b/drivers/net/phy/qcom/qca83xx.c
@@ -220,8 +220,9 @@ static struct phy_driver qca83xx_driver[] = {
.phy_id_mask = QCA8K_PHY_ID_MASK,
.name = "Qualcomm Atheros 8337 internal PHY",
/* PHY_GBIT_FEATURES */
- .probe = qca83xx_probe,
.flags = PHY_IS_INTERNAL,
+ .ops = &(const struct phy_driver_ops){
+ .probe = qca83xx_probe,
.config_init = qca83xx_config_init,
.soft_reset = genphy_soft_reset,
.get_sset_count = qca83xx_get_sset_count,
@@ -229,15 +230,17 @@ static struct phy_driver qca83xx_driver[] = {
.get_stats = qca83xx_get_stats,
.suspend = qca8337_suspend,
.resume = qca83xx_resume,
+ },
}, {
/* QCA8327-A from switch QCA8327-AL1A */
.phy_id = QCA8327_A_PHY_ID,
.phy_id_mask = QCA8K_PHY_ID_MASK,
.name = "Qualcomm Atheros 8327-A internal PHY",
/* PHY_GBIT_FEATURES */
+ .flags = PHY_IS_INTERNAL,
+ .ops = &(const struct phy_driver_ops){
.link_change_notify = qca83xx_link_change_notify,
.probe = qca83xx_probe,
- .flags = PHY_IS_INTERNAL,
.config_init = qca8327_config_init,
.soft_reset = genphy_soft_reset,
.get_sset_count = qca83xx_get_sset_count,
@@ -245,15 +248,17 @@ static struct phy_driver qca83xx_driver[] = {
.get_stats = qca83xx_get_stats,
.suspend = qca8327_suspend,
.resume = qca83xx_resume,
+ },
}, {
/* QCA8327-B from switch QCA8327-BL1A */
.phy_id = QCA8327_B_PHY_ID,
.phy_id_mask = QCA8K_PHY_ID_MASK,
.name = "Qualcomm Atheros 8327-B internal PHY",
/* PHY_GBIT_FEATURES */
+ .flags = PHY_IS_INTERNAL,
+ .ops = &(const struct phy_driver_ops){
.link_change_notify = qca83xx_link_change_notify,
.probe = qca83xx_probe,
- .flags = PHY_IS_INTERNAL,
.config_init = qca8327_config_init,
.soft_reset = genphy_soft_reset,
.get_sset_count = qca83xx_get_sset_count,
@@ -261,6 +266,7 @@ static struct phy_driver qca83xx_driver[] = {
.get_stats = qca83xx_get_stats,
.suspend = qca8327_suspend,
.resume = qca83xx_resume,
+ },
}, };

module_phy_driver(qca83xx_driver);
diff --git a/drivers/net/phy/qsemi.c b/drivers/net/phy/qsemi.c
index 30d15f7c9b03..a8c5c263669d 100644
--- a/drivers/net/phy/qsemi.c
+++ b/drivers/net/phy/qsemi.c
@@ -148,9 +148,11 @@ static struct phy_driver qs6612_driver[] = { {
.name = "QS6612",
.phy_id_mask = 0xfffffff0,
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = qs6612_config_init,
.config_intr = qs6612_config_intr,
.handle_interrupt = qs6612_handle_interrupt,
+ },
} };

module_phy_driver(qs6612_driver);
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 481c79fbd6eb..b5db40d783d8 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -867,37 +867,46 @@ static struct phy_driver realtek_drvs[] = {
{
PHY_ID_MATCH_EXACT(0x00008201),
.name = "RTL8201CP Ethernet",
+ .ops = &(const struct phy_driver_ops){
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
+ },
}, {
PHY_ID_MATCH_EXACT(0x001cc816),
.name = "RTL8201F Fast Ethernet",
+ .ops = &(const struct phy_driver_ops){
.config_intr = &rtl8201_config_intr,
.handle_interrupt = rtl8201_handle_interrupt,
.suspend = genphy_suspend,
.resume = genphy_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
+ },
}, {
PHY_ID_MATCH_MODEL(0x001cc880),
.name = "RTL8208 Fast Ethernet",
+ .ops = &(const struct phy_driver_ops){
.read_mmd = genphy_read_mmd_unsupported,
.write_mmd = genphy_write_mmd_unsupported,
.suspend = genphy_suspend,
.resume = genphy_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
+ },
}, {
PHY_ID_MATCH_EXACT(0x001cc910),
.name = "RTL8211 Gigabit Ethernet",
+ .ops = &(const struct phy_driver_ops){
.config_aneg = rtl8211_config_aneg,
.read_mmd = &genphy_read_mmd_unsupported,
.write_mmd = &genphy_write_mmd_unsupported,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
+ },
}, {
PHY_ID_MATCH_EXACT(0x001cc912),
.name = "RTL8211B Gigabit Ethernet",
+ .ops = &(const struct phy_driver_ops){
.config_intr = &rtl8211b_config_intr,
.handle_interrupt = rtl821x_handle_interrupt,
.read_mmd = &genphy_read_mmd_unsupported,
@@ -906,26 +915,32 @@ static struct phy_driver realtek_drvs[] = {
.resume = rtl8211b_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
+ },
}, {
PHY_ID_MATCH_EXACT(0x001cc913),
.name = "RTL8211C Gigabit Ethernet",
+ .ops = &(const struct phy_driver_ops){
.config_init = rtl8211c_config_init,
.read_mmd = &genphy_read_mmd_unsupported,
.write_mmd = &genphy_write_mmd_unsupported,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
+ },
}, {
PHY_ID_MATCH_EXACT(0x001cc914),
.name = "RTL8211DN Gigabit Ethernet",
+ .ops = &(const struct phy_driver_ops){
.config_intr = rtl8211e_config_intr,
.handle_interrupt = rtl821x_handle_interrupt,
.suspend = genphy_suspend,
.resume = genphy_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
+ },
}, {
PHY_ID_MATCH_EXACT(0x001cc915),
.name = "RTL8211E Gigabit Ethernet",
+ .ops = &(const struct phy_driver_ops){
.config_init = &rtl8211e_config_init,
.config_intr = &rtl8211e_config_intr,
.handle_interrupt = rtl821x_handle_interrupt,
@@ -933,9 +948,12 @@ static struct phy_driver realtek_drvs[] = {
.resume = genphy_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
+ },
}, {
PHY_ID_MATCH_EXACT(0x001cc916),
.name = "RTL8211F Gigabit Ethernet",
+ .flags = PHY_ALWAYS_CALL_SUSPEND,
+ .ops = &(const struct phy_driver_ops){
.probe = rtl821x_probe,
.config_init = &rtl8211f_config_init,
.read_status = rtlgen_read_status,
@@ -945,10 +963,12 @@ static struct phy_driver realtek_drvs[] = {
.resume = rtl821x_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
- .flags = PHY_ALWAYS_CALL_SUSPEND,
+ },
}, {
PHY_ID_MATCH_EXACT(RTL_8211FVD_PHYID),
.name = "RTL8211F-VD Gigabit Ethernet",
+ .flags = PHY_ALWAYS_CALL_SUSPEND,
+ .ops = &(const struct phy_driver_ops){
.probe = rtl821x_probe,
.config_init = &rtl8211f_config_init,
.read_status = rtlgen_read_status,
@@ -958,9 +978,10 @@ static struct phy_driver realtek_drvs[] = {
.resume = rtl821x_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
- .flags = PHY_ALWAYS_CALL_SUSPEND,
+ },
}, {
.name = "Generic FE-GE Realtek PHY",
+ .ops = &(const struct phy_driver_ops){
.match_phy_device = rtlgen_match_phy_device,
.read_status = rtlgen_read_status,
.suspend = genphy_suspend,
@@ -969,8 +990,10 @@ static struct phy_driver realtek_drvs[] = {
.write_page = rtl821x_write_page,
.read_mmd = rtlgen_read_mmd,
.write_mmd = rtlgen_write_mmd,
+ },
}, {
.name = "RTL8226 2.5Gbps PHY",
+ .ops = &(const struct phy_driver_ops){
.match_phy_device = rtl8226_match_phy_device,
.get_features = rtl822x_get_features,
.config_aneg = rtl822x_config_aneg,
@@ -981,9 +1004,11 @@ static struct phy_driver realtek_drvs[] = {
.write_page = rtl821x_write_page,
.read_mmd = rtl822x_read_mmd,
.write_mmd = rtl822x_write_mmd,
+ },
}, {
PHY_ID_MATCH_EXACT(0x001cc840),
.name = "RTL8226B_RTL8221B 2.5Gbps PHY",
+ .ops = &(const struct phy_driver_ops){
.get_features = rtl822x_get_features,
.config_aneg = rtl822x_config_aneg,
.read_status = rtl822x_read_status,
@@ -993,9 +1018,11 @@ static struct phy_driver realtek_drvs[] = {
.write_page = rtl821x_write_page,
.read_mmd = rtl822x_read_mmd,
.write_mmd = rtl822x_write_mmd,
+ },
}, {
PHY_ID_MATCH_EXACT(0x001cc838),
.name = "RTL8226-CG 2.5Gbps PHY",
+ .ops = &(const struct phy_driver_ops){
.get_features = rtl822x_get_features,
.config_aneg = rtl822x_config_aneg,
.read_status = rtl822x_read_status,
@@ -1003,9 +1030,11 @@ static struct phy_driver realtek_drvs[] = {
.resume = rtlgen_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
+ },
}, {
PHY_ID_MATCH_EXACT(0x001cc848),
.name = "RTL8226B-CG_RTL8221B-CG 2.5Gbps PHY",
+ .ops = &(const struct phy_driver_ops){
.get_features = rtl822x_get_features,
.config_aneg = rtl822x_config_aneg,
.read_status = rtl822x_read_status,
@@ -1013,9 +1042,11 @@ static struct phy_driver realtek_drvs[] = {
.resume = rtlgen_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
+ },
}, {
PHY_ID_MATCH_EXACT(0x001cc849),
.name = "RTL8221B-VB-CG 2.5Gbps PHY",
+ .ops = &(const struct phy_driver_ops){
.get_features = rtl822x_get_features,
.config_aneg = rtl822x_config_aneg,
.read_status = rtl822x_read_status,
@@ -1023,9 +1054,11 @@ static struct phy_driver realtek_drvs[] = {
.resume = rtlgen_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
+ },
}, {
PHY_ID_MATCH_EXACT(0x001cc84a),
.name = "RTL8221B-VM-CG 2.5Gbps PHY",
+ .ops = &(const struct phy_driver_ops){
.get_features = rtl822x_get_features,
.config_aneg = rtl822x_config_aneg,
.read_status = rtl822x_read_status,
@@ -1033,9 +1066,11 @@ static struct phy_driver realtek_drvs[] = {
.resume = rtlgen_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
+ },
}, {
PHY_ID_MATCH_EXACT(0x001cc862),
.name = "RTL8251B 5Gbps PHY",
+ .ops = &(const struct phy_driver_ops){
.get_features = rtl822x_get_features,
.config_aneg = rtl822x_config_aneg,
.read_status = rtl822x_read_status,
@@ -1043,9 +1078,11 @@ static struct phy_driver realtek_drvs[] = {
.resume = rtlgen_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
+ },
}, {
PHY_ID_MATCH_EXACT(0x001cc961),
.name = "RTL8366RB Gigabit Ethernet",
+ .ops = &(const struct phy_driver_ops){
.config_init = &rtl8366rb_config_init,
/* These interrupts are handled by the irq controller
* embedded inside the RTL8366RB, they get unmasked when the
@@ -1056,10 +1093,12 @@ static struct phy_driver realtek_drvs[] = {
.handle_interrupt = genphy_handle_interrupt_no_ack,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
PHY_ID_MATCH_EXACT(0x001ccb00),
.name = "RTL9000AA_RTL9000AN Ethernet",
.features = PHY_BASIC_T1_FEATURES,
+ .ops = &(const struct phy_driver_ops){
.config_init = rtl9000a_config_init,
.config_aneg = rtl9000a_config_aneg,
.read_status = rtl9000a_read_status,
@@ -1069,14 +1108,17 @@ static struct phy_driver realtek_drvs[] = {
.resume = genphy_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
+ },
}, {
PHY_ID_MATCH_EXACT(0x001cc942),
.name = "RTL8365MB-VC Gigabit Ethernet",
+ .ops = &(const struct phy_driver_ops){
/* Interrupt handling analogous to RTL8366RB */
.config_intr = genphy_no_config_intr,
.handle_interrupt = genphy_handle_interrupt_no_ack,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
},
};

diff --git a/drivers/net/phy/rockchip.c b/drivers/net/phy/rockchip.c
index bb13e75183ee..45e18fbec58d 100644
--- a/drivers/net/phy/rockchip.c
+++ b/drivers/net/phy/rockchip.c
@@ -177,12 +177,14 @@ static struct phy_driver rockchip_phy_driver[] = {
.name = "Rockchip integrated EPHY",
/* PHY_BASIC_FEATURES */
.flags = 0,
+ .ops = &(const struct phy_driver_ops){
.link_change_notify = rockchip_link_change_notify,
.soft_reset = genphy_soft_reset,
.config_init = rockchip_integrated_phy_config_init,
.config_aneg = rockchip_config_aneg,
.suspend = genphy_suspend,
.resume = rockchip_phy_resume,
+ },
},
};

diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c
index 150aea7c9c36..0860d30901a2 100644
--- a/drivers/net/phy/smsc.c
+++ b/drivers/net/phy/smsc.c
@@ -643,6 +643,7 @@ static struct phy_driver smsc_phy_driver[] = {
.name = "SMSC LAN83C185",

/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){

.probe = smsc_phy_probe,

@@ -656,12 +657,14 @@ static struct phy_driver smsc_phy_driver[] = {

.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
.phy_id = 0x0007c0b0, /* OUI=0x00800f, Model#=0x0b */
.phy_id_mask = 0xfffffff0,
.name = "SMSC LAN8187",

/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){

.probe = smsc_phy_probe,

@@ -680,6 +683,7 @@ static struct phy_driver smsc_phy_driver[] = {

.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
/* This covers internal PHY (phy_id: 0x0007C0C3) for
* LAN9500 (PID: 0x9500), LAN9514 (PID: 0xec00), LAN9505 (PID: 0x9505)
@@ -689,6 +693,7 @@ static struct phy_driver smsc_phy_driver[] = {
.name = "SMSC LAN8700",

/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){

.probe = smsc_phy_probe,

@@ -712,12 +717,14 @@ static struct phy_driver smsc_phy_driver[] = {

.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
.phy_id = 0x0007c0d0, /* OUI=0x00800f, Model#=0x0d */
.phy_id_mask = 0xfffffff0,
.name = "SMSC LAN911x Internal PHY",

/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){

.probe = smsc_phy_probe,

@@ -727,6 +734,7 @@ static struct phy_driver smsc_phy_driver[] = {

.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
/* This covers internal PHY (phy_id: 0x0007C0F0) for
* LAN9500A (PID: 0x9E00), LAN9505A (PID: 0x9E01)
@@ -736,6 +744,7 @@ static struct phy_driver smsc_phy_driver[] = {
.name = "SMSC LAN8710/LAN8720",

/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){

.probe = smsc_phy_probe,

@@ -759,6 +768,7 @@ static struct phy_driver smsc_phy_driver[] = {

.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
.phy_id = 0x0007c110,
.phy_id_mask = 0xfffffff0,
@@ -766,6 +776,7 @@ static struct phy_driver smsc_phy_driver[] = {

/* PHY_BASIC_FEATURES */
.flags = PHY_RST_AFTER_CLK_EN,
+ .ops = &(const struct phy_driver_ops){

.probe = smsc_phy_probe,

@@ -792,6 +803,7 @@ static struct phy_driver smsc_phy_driver[] = {

.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
.phy_id = 0x0007c130, /* 0x0007c130 and 0x0007c131 */
/* This mask (0xfffffff2) is to differentiate from
@@ -803,6 +815,7 @@ static struct phy_driver smsc_phy_driver[] = {

/* PHY_BASIC_FEATURES */
.flags = PHY_RST_AFTER_CLK_EN,
+ .ops = &(const struct phy_driver_ops){

.probe = smsc_phy_probe,

@@ -829,6 +842,7 @@ static struct phy_driver smsc_phy_driver[] = {

.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
} };

module_phy_driver(smsc_phy_driver);
diff --git a/drivers/net/phy/ste10Xp.c b/drivers/net/phy/ste10Xp.c
index 309e4c3496c4..1af413906823 100644
--- a/drivers/net/phy/ste10Xp.c
+++ b/drivers/net/phy/ste10Xp.c
@@ -105,21 +105,25 @@ static struct phy_driver ste10xp_pdriver[] = {
.phy_id_mask = 0xfffffff0,
.name = "STe101p",
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = ste10Xp_config_init,
.config_intr = ste10Xp_config_intr,
.handle_interrupt = ste10Xp_handle_interrupt,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
}, {
.phy_id = STE100P_PHY_ID,
.phy_id_mask = 0xffffffff,
.name = "STe100p",
/* PHY_BASIC_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = ste10Xp_config_init,
.config_intr = ste10Xp_config_intr,
.handle_interrupt = ste10Xp_handle_interrupt,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ },
} };

module_phy_driver(ste10xp_pdriver);
diff --git a/drivers/net/phy/teranetics.c b/drivers/net/phy/teranetics.c
index 8057ea8dbc21..d1eadd7074a3 100644
--- a/drivers/net/phy/teranetics.c
+++ b/drivers/net/phy/teranetics.c
@@ -78,10 +78,12 @@ static struct phy_driver teranetics_driver[] = {
.phy_id_mask = 0xffffffff,
.name = "Teranetics TN2020",
.features = PHY_10GBIT_FEATURES,
+ .ops = &(const struct phy_driver_ops){
.aneg_done = teranetics_aneg_done,
.config_aneg = gen10g_config_aneg,
.read_status = teranetics_read_status,
.match_phy_device = teranetics_match_phy_device,
+ },
},
};

diff --git a/drivers/net/phy/uPD60620.c b/drivers/net/phy/uPD60620.c
index 38834347a427..865f62844d58 100644
--- a/drivers/net/phy/uPD60620.c
+++ b/drivers/net/phy/uPD60620.c
@@ -84,8 +84,10 @@ static struct phy_driver upd60620_driver[1] = { {
.name = "Renesas uPD60620",
/* PHY_BASIC_FEATURES */
.flags = 0,
+ .ops = &(const struct phy_driver_ops){
.config_init = upd60620_config_init,
.read_status = upd60620_read_status,
+ },
} };

module_phy_driver(upd60620_driver);
diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c
index 897b979ec03c..41fc63ce3b2e 100644
--- a/drivers/net/phy/vitesse.c
+++ b/drivers/net/phy/vitesse.c
@@ -408,99 +408,121 @@ static struct phy_driver vsc82xx_driver[] = {
.name = "Vitesse VSC8234",
.phy_id_mask = 0x000ffff0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = &vsc824x_config_init,
.config_aneg = &vsc82x4_config_aneg,
.config_intr = &vsc82xx_config_intr,
.handle_interrupt = &vsc82xx_handle_interrupt,
+ },
}, {
.phy_id = PHY_ID_VSC8244,
.name = "Vitesse VSC8244",
.phy_id_mask = 0x000fffc0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = &vsc824x_config_init,
.config_aneg = &vsc82x4_config_aneg,
.config_intr = &vsc82xx_config_intr,
.handle_interrupt = &vsc82xx_handle_interrupt,
+ },
}, {
.phy_id = PHY_ID_VSC8572,
.name = "Vitesse VSC8572",
.phy_id_mask = 0x000ffff0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = &vsc824x_config_init,
.config_aneg = &vsc82x4_config_aneg,
.config_intr = &vsc82xx_config_intr,
.handle_interrupt = &vsc82xx_handle_interrupt,
+ },
}, {
.phy_id = PHY_ID_VSC8601,
.name = "Vitesse VSC8601",
.phy_id_mask = 0x000ffff0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = &vsc8601_config_init,
.config_intr = &vsc82xx_config_intr,
.handle_interrupt = &vsc82xx_handle_interrupt,
+ },
}, {
.phy_id = PHY_ID_VSC7385,
.name = "Vitesse VSC7385",
.phy_id_mask = 0x000ffff0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = vsc738x_config_init,
.config_aneg = vsc73xx_config_aneg,
.read_page = vsc73xx_read_page,
.write_page = vsc73xx_write_page,
+ },
}, {
.phy_id = PHY_ID_VSC7388,
.name = "Vitesse VSC7388",
.phy_id_mask = 0x000ffff0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = vsc738x_config_init,
.config_aneg = vsc73xx_config_aneg,
.read_page = vsc73xx_read_page,
.write_page = vsc73xx_write_page,
+ },
}, {
.phy_id = PHY_ID_VSC7395,
.name = "Vitesse VSC7395",
.phy_id_mask = 0x000ffff0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = vsc739x_config_init,
.config_aneg = vsc73xx_config_aneg,
.read_page = vsc73xx_read_page,
.write_page = vsc73xx_write_page,
+ },
}, {
.phy_id = PHY_ID_VSC7398,
.name = "Vitesse VSC7398",
.phy_id_mask = 0x000ffff0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = vsc739x_config_init,
.config_aneg = vsc73xx_config_aneg,
.read_page = vsc73xx_read_page,
.write_page = vsc73xx_write_page,
+ },
}, {
.phy_id = PHY_ID_VSC8662,
.name = "Vitesse VSC8662",
.phy_id_mask = 0x000ffff0,
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = &vsc824x_config_init,
.config_aneg = &vsc82x4_config_aneg,
.config_intr = &vsc82xx_config_intr,
.handle_interrupt = &vsc82xx_handle_interrupt,
+ },
}, {
/* Vitesse 8221 */
.phy_id = PHY_ID_VSC8221,
.phy_id_mask = 0x000ffff0,
.name = "Vitesse VSC8221",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = &vsc8221_config_init,
.config_intr = &vsc82xx_config_intr,
.handle_interrupt = &vsc82xx_handle_interrupt,
+ },
}, {
/* Vitesse 8211 */
.phy_id = PHY_ID_VSC8211,
.phy_id_mask = 0x000ffff0,
.name = "Vitesse VSC8211",
/* PHY_GBIT_FEATURES */
+ .ops = &(const struct phy_driver_ops){
.config_init = &vsc8221_config_init,
.config_intr = &vsc82xx_config_intr,
.handle_interrupt = &vsc82xx_handle_interrupt,
+ },
} };

module_phy_driver(vsc82xx_driver);
diff --git a/drivers/net/phy/xilinx_gmii2rgmii.c b/drivers/net/phy/xilinx_gmii2rgmii.c
index 7b1bc5fcef9b..46f64c1fa143 100644
--- a/drivers/net/phy/xilinx_gmii2rgmii.c
+++ b/drivers/net/phy/xilinx_gmii2rgmii.c
@@ -24,6 +24,7 @@ struct gmii2rgmii {
struct phy_device *phy_dev;
const struct phy_driver *phy_drv;
struct phy_driver conv_phy_drv;
+ struct phy_driver_ops conv_phy_drv_ops;
struct mdio_device *mdio;
};

@@ -51,8 +52,8 @@ static int xgmiitorgmii_read_status(struct phy_device *phydev)
struct gmii2rgmii *priv = mdiodev_get_drvdata(&phydev->mdio);
int err;

- if (priv->phy_drv->read_status)
- err = priv->phy_drv->read_status(phydev);
+ if (priv->phy_drv->ops && priv->phy_drv->ops->read_status)
+ err = priv->phy_drv->ops->read_status(phydev);
else
err = genphy_read_status(phydev);
if (err < 0)
@@ -68,8 +69,8 @@ static int xgmiitorgmii_set_loopback(struct phy_device *phydev, bool enable)
struct gmii2rgmii *priv = mdiodev_get_drvdata(&phydev->mdio);
int err;

- if (priv->phy_drv->set_loopback)
- err = priv->phy_drv->set_loopback(phydev, enable);
+ if (priv->phy_drv->ops && priv->phy_drv->ops->set_loopback)
+ err = priv->phy_drv->ops->set_loopback(phydev, enable);
else
err = genphy_loopback(phydev, enable);
if (err < 0)
@@ -113,8 +114,11 @@ static int xgmiitorgmii_probe(struct mdio_device *mdiodev)
priv->phy_drv = priv->phy_dev->drv;
memcpy(&priv->conv_phy_drv, priv->phy_dev->drv,
sizeof(struct phy_driver));
- priv->conv_phy_drv.read_status = xgmiitorgmii_read_status;
- priv->conv_phy_drv.set_loopback = xgmiitorgmii_set_loopback;
+ memcpy(&priv->conv_phy_drv_ops, priv->phy_dev->drv->ops,
+ sizeof(struct phy_driver_ops));
+ priv->conv_phy_drv_ops.read_status = xgmiitorgmii_read_status;
+ priv->conv_phy_drv_ops.set_loopback = xgmiitorgmii_set_loopback;
+ priv->conv_phy_drv.ops = &priv->conv_phy_drv_ops;
mdiodev_set_drvdata(&priv->phy_dev->mdio, priv);
priv->phy_dev->drv = &priv->conv_phy_drv;

diff --git a/include/linux/phy.h b/include/linux/phy.h
index c2dda21b39e1..bce995067b4c 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -882,19 +882,7 @@ struct phy_led {
#define to_phy_led(d) container_of(d, struct phy_led, led_cdev)

/**
- * struct phy_driver - Driver structure for a particular PHY type
- *
- * @mdiodrv: Data common to all MDIO devices
- * @phy_id: The result of reading the UID registers of this PHY
- * type, and ANDing them with the phy_id_mask. This driver
- * only works for PHYs with IDs which match this field
- * @name: The friendly name of this PHY type
- * @phy_id_mask: Defines the important bits of the phy_id
- * @features: A mandatory list of features (speed, duplex, etc)
- * supported by this PHY
- * @flags: A bitfield defining certain other features this PHY
- * supports (like interrupts)
- * @driver_data: Static driver data
+ * struct phy_driver_ops - Driver structure for all OPs of a particular PHY
*
* All functions are optional. If config_aneg or read_status
* are not implemented, the phy core uses the genphy versions.
@@ -903,16 +891,8 @@ struct phy_led {
* to be able to block when the bus transaction is happening,
* and be freed up by an interrupt (The MPC85xx has this ability,
* though it is not currently supported in the driver).
- */
-struct phy_driver {
- struct mdio_driver_common mdiodrv;
- u32 phy_id;
- char *name;
- u32 phy_id_mask;
- const unsigned long * const features;
- u32 flags;
- const void *driver_data;
-
+*/
+struct phy_driver_ops {
/**
* @soft_reset: Called to issue a PHY software reset
*/
@@ -1171,6 +1151,33 @@ struct phy_driver {
int (*led_polarity_set)(struct phy_device *dev, int index,
unsigned long modes);
};
+
+/**
+ * struct phy_driver - Driver structure for a particular PHY type
+ *
+ * @mdiodrv: Data common to all MDIO devices
+ * @phy_id: The result of reading the UID registers of this PHY
+ * type, and ANDing them with the phy_id_mask. This driver
+ * only works for PHYs with IDs which match this field
+ * @name: The friendly name of this PHY type
+ * @phy_id_mask: Defines the important bits of the phy_id
+ * @features: A mandatory list of features (speed, duplex, etc)
+ * supported by this PHY
+ * @flags: A bitfield defining certain other features this PHY
+ * supports (like interrupts)
+ * @driver_data: Static driver data
+ * @ops: Pointer to PHY driver OPs
+ */
+struct phy_driver {
+ struct mdio_driver_common mdiodrv;
+ u32 phy_id;
+ char *name;
+ u32 phy_id_mask;
+ const unsigned long * const features;
+ u32 flags;
+ const void *driver_data;
+ const struct phy_driver_ops *ops;
+};
#define to_phy_driver(d) container_of(to_mdio_common_driver(d), \
struct phy_driver, mdiodrv)

@@ -1929,8 +1936,8 @@ static inline int phy_read_status(struct phy_device *phydev)
if (!phydev->drv)
return -EIO;

- if (phydev->drv->read_status)
- return phydev->drv->read_status(phydev);
+ if (phydev->drv->ops && phydev->drv->ops->read_status)
+ return phydev->drv->ops->read_status(phydev);
else
return genphy_read_status(phydev);
}
--
2.43.0


2024-02-17 22:22:26

by Andrew Lunn

[permalink] [raw]
Subject: Re: [net-next RFC PATCH 0/3] net: phy: detach PHY driver OPs from phy_driver struct

On Sat, Feb 17, 2024 at 08:41:11PM +0100, Christian Marangi wrote:
> Posting as RFC due to the massive change to a fundamental struct.
>
> While adding some PHY ID for Aquantia, I notice that there is a
> big problem with duplicating OPs with each PHY.
>
> The original idea to prevent this was to use mask on the PHY ID
> and identify PHY Family. Problem is that OEM started to use all
> kind of PHY ID and this is not doable, hence for PHY that have
> the same OPs, we have to duplicate all of them.
>
> This is present in Aquantia PHY, but is much more present in
> other PHY, especially in the BCM7XXX where they use a big macro
> for common PHYs.
>
> To reduce patch delta, I added the additional variable without
> adding tabs as this would have resulted in a massive patch.
> Also to have patch bisectable, this change has to be in one go
> hence I had to use this trick to reduce patch delta.

To me, this makes the code look ugly. I also expect many text editors
which understand indentation will be unhappy, saying the indentation is
wrong.

> 64 files changed, 737 insertions(+), 291 deletions(-)

These statistics are not good. If you had deleted more lines than you
added, then maybe it might be an O.K. idea.

Sometimes KISS is best.

Andrew

2024-02-17 23:23:11

by Christian Marangi

[permalink] [raw]
Subject: Re: [net-next RFC PATCH 0/3] net: phy: detach PHY driver OPs from phy_driver struct

On Sat, Feb 17, 2024 at 07:53:08PM +0000, Russell King (Oracle) wrote:
> On Sat, Feb 17, 2024 at 08:41:11PM +0100, Christian Marangi wrote:
> > Posting as RFC due to the massive change to a fundamental struct.
> >
> > While adding some PHY ID for Aquantia, I notice that there is a
> > big problem with duplicating OPs with each PHY.
> >
> > The original idea to prevent this was to use mask on the PHY ID
> > and identify PHY Family. Problem is that OEM started to use all
> > kind of PHY ID and this is not doable, hence for PHY that have
> > the same OPs, we have to duplicate all of them.
> >
> > This is present in Aquantia PHY, but is much more present in
> > other PHY, especially in the BCM7XXX where they use a big macro
> > for common PHYs.
> >
> > To reduce patch delta, I added the additional variable without
> > adding tabs as this would have resulted in a massive patch.
> > Also to have patch bisectable, this change has to be in one go
> > hence I had to use this trick to reduce patch delta.
> >
> > Other solution to this problem were to introduce additional
> > variables to phy_driver struct but that would have resulted
> > in having 2 different way to do the same thing and that is not O.K.
> >
> > I took care to compile-test all the PHY, only exception is the unique
> > RUST driver, where I still have to learn that funny language and
> > I didn't had time to update it, so that is the only driver that
> > I think require some fixup.
> >
> > I posted 2 example that would benefits from this change, but I can
> > find much more in other PHY driver.
>
> Would it make more sense instead of this big churn, to instead
> introduce into struct phy_driver:
>
> struct mdio_device_id *ids;
>
> which would then allow a phy_driver structure to be matched by
> several device IDs?

Yes that was an alternative idea, but is it good to then have 2 way to
declare PHY ID?

Also the name should be changed... Maybe an array of a struct PHY_ID,
name that ends with a sentinel?

>
> We then would not need to touch any of the existing drivers initially,
> and a later cleanup could be to identify those where all the ops are
> the same for several phy_driver structures, and convert them over.

We have many PHY that already have macro to define the same OPs and
change only name PHY ID and mask.

--
Ansuel

2024-02-17 23:28:16

by Christian Marangi

[permalink] [raw]
Subject: Re: [net-next RFC PATCH 0/3] net: phy: detach PHY driver OPs from phy_driver struct

On Sat, Feb 17, 2024 at 11:21:44PM +0100, Andrew Lunn wrote:
> On Sat, Feb 17, 2024 at 08:41:11PM +0100, Christian Marangi wrote:
> > Posting as RFC due to the massive change to a fundamental struct.
> >
> > While adding some PHY ID for Aquantia, I notice that there is a
> > big problem with duplicating OPs with each PHY.
> >
> > The original idea to prevent this was to use mask on the PHY ID
> > and identify PHY Family. Problem is that OEM started to use all
> > kind of PHY ID and this is not doable, hence for PHY that have
> > the same OPs, we have to duplicate all of them.
> >
> > This is present in Aquantia PHY, but is much more present in
> > other PHY, especially in the BCM7XXX where they use a big macro
> > for common PHYs.
> >
> > To reduce patch delta, I added the additional variable without
> > adding tabs as this would have resulted in a massive patch.
> > Also to have patch bisectable, this change has to be in one go
> > hence I had to use this trick to reduce patch delta.
>
> To me, this makes the code look ugly. I also expect many text editors
> which understand indentation will be unhappy, saying the indentation is
> wrong.
>

Yes, it was done to limit the patch delta, if I had to account for the
tab for each new section we would be in the order of 2000+ changes I
think.

> > 64 files changed, 737 insertions(+), 291 deletions(-)
>
> These statistics are not good. If you had deleted more lines than you
> added, then maybe it might be an O.K. idea.
>
> Sometimes KISS is best.
>

Well IMHO these stats are a bit flawed, the additional code is really
just extra check if ops is defined and the new .ops variable in each
phy_driver.

If you check patch 2 and 3 you can already see some code is removed.
Also while minimal the final .o produced results in bcm7xxx going from
53kb to 45kb and the aquantia driver from 48kb to 45kb.

I understand that this major rework might be too much, so I think the
only way to handle this is with introducing support for declaring
multiple PHY ID for one phy_driver struct.

--
Ansuel

2024-02-17 23:49:09

by Andrew Lunn

[permalink] [raw]
Subject: Re: [net-next RFC PATCH 0/3] net: phy: detach PHY driver OPs from phy_driver struct

> Yes, it was done to limit the patch delta, if I had to account for the
> tab for each new section we would be in the order of 2000+ changes I
> think.
>
> > > 64 files changed, 737 insertions(+), 291 deletions(-)
> >
> > These statistics are not good. If you had deleted more lines than you
> > added, then maybe it might be an O.K. idea.
> >
> > Sometimes KISS is best.
> >
>
> Well IMHO these stats are a bit flawed, the additional code is really
> just extra check if ops is defined and the new .ops variable in each
> phy_driver.
>
> If you check patch 2 and 3 you can already see some code is removed.

Yes, the problem is, it probably needs another 50 patches to remove
all the duplication. I have to question, is that really going to
happen? Are you going to keep working on this until every driver has
its duplicates removed?

It probably needs some tooling to help. Something which can decode the
object file, and tell you which ops structures are identical. That can
then guide you when editing all the PHY drivers.

Andrew