Subject: [PATCH] PCI: dwc: Enable runtime pm of the host bridge

Currently controller driver goes to runtime suspend irrespective
of the child(pci-pci bridge & endpoint driver) runtime state.
This is because the runtime pm is not being enabled for the host
bridge dev which maintains parent child relationship.

So enable pm runtime for the host bridge, so that controller driver
goes to suspend only when all child devices goes to runtime suspend.

Signed-off-by: Krishna chaitanya chundru <[email protected]>
---
drivers/pci/controller/dwc/pcie-designware-host.c | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index d5fc31f8345f..57756a73df30 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -16,6 +16,7 @@
#include <linux/of_pci.h>
#include <linux/pci_regs.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>

#include "../../pci.h"
#include "pcie-designware.h"
@@ -505,6 +506,9 @@ int dw_pcie_host_init(struct dw_pcie_rp *pp)
if (pp->ops->post_init)
pp->ops->post_init(pp);

+ pm_runtime_set_active(&bridge->dev);
+ pm_runtime_enable(&bridge->dev);
+
return 0;

err_stop_link:

---
base-commit: 6613476e225e090cc9aad49be7fa504e290dd33d
change-id: 20240219-runtime_pm_enable-bdc17914bd50

Best regards,
--
Krishna chaitanya chundru <[email protected]>



2024-02-26 15:55:27

by Manivannan Sadhasivam

[permalink] [raw]
Subject: Re: [PATCH] PCI: dwc: Enable runtime pm of the host bridge

On Mon, Feb 19, 2024 at 06:51:10PM +0530, Krishna chaitanya chundru wrote:
> Currently controller driver goes to runtime suspend irrespective
> of the child(pci-pci bridge & endpoint driver) runtime state.
> This is because the runtime pm is not being enabled for the host
> bridge dev which maintains parent child relationship.
>

You should describe the parent-child topology first. Maybe a simple flow like
below will help:

PCIe Controller
|
PCIe Host bridge
|
PCI-PCI bridge
|
PCIe endpoint

Also explain the fact that since runtime PM is disabled for host bridge, the
state of the child devices under the host bridge is not taken into account by
PM framework for the top level parent, PCIe controller. So PM framework, allows
the controller driver to enter runtime PM irrespective of the state of the
devices under the host bridge. And this causes the topology breakage and also
possible PM issues.

- Mani

> So enable pm runtime for the host bridge, so that controller driver
> goes to suspend only when all child devices goes to runtime suspend.
>
> Signed-off-by: Krishna chaitanya chundru <[email protected]>
> ---
> drivers/pci/controller/dwc/pcie-designware-host.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
> index d5fc31f8345f..57756a73df30 100644
> --- a/drivers/pci/controller/dwc/pcie-designware-host.c
> +++ b/drivers/pci/controller/dwc/pcie-designware-host.c
> @@ -16,6 +16,7 @@
> #include <linux/of_pci.h>
> #include <linux/pci_regs.h>
> #include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
>
> #include "../../pci.h"
> #include "pcie-designware.h"
> @@ -505,6 +506,9 @@ int dw_pcie_host_init(struct dw_pcie_rp *pp)
> if (pp->ops->post_init)
> pp->ops->post_init(pp);
>
> + pm_runtime_set_active(&bridge->dev);
> + pm_runtime_enable(&bridge->dev);
> +
> return 0;
>
> err_stop_link:
>
> ---
> base-commit: 6613476e225e090cc9aad49be7fa504e290dd33d
> change-id: 20240219-runtime_pm_enable-bdc17914bd50
>
> Best regards,
> --
> Krishna chaitanya chundru <[email protected]>
>

--
மணிவண்ணன் சதாசிவம்

Subject: Re: [PATCH] PCI: dwc: Enable runtime pm of the host bridge



On 2/26/2024 9:23 PM, Manivannan Sadhasivam wrote:
> On Mon, Feb 19, 2024 at 06:51:10PM +0530, Krishna chaitanya chundru wrote:
>> Currently controller driver goes to runtime suspend irrespective
>> of the child(pci-pci bridge & endpoint driver) runtime state.
>> This is because the runtime pm is not being enabled for the host
>> bridge dev which maintains parent child relationship.
>>
>
> You should describe the parent-child topology first. Maybe a simple flow like
> below will help:
>
> PCIe Controller
> |
> PCIe Host bridge
> |
> PCI-PCI bridge
> |
> PCIe endpoint
>
> Also explain the fact that since runtime PM is disabled for host bridge, the
> state of the child devices under the host bridge is not taken into account by
> PM framework for the top level parent, PCIe controller. So PM framework, allows
> the controller driver to enter runtime PM irrespective of the state of the
> devices under the host bridge. And this causes the topology breakage and also
> possible PM issues.
>
> - Mani
>
ACK.

- Krishna Chaitanya.
>> So enable pm runtime for the host bridge, so that controller driver
>> goes to suspend only when all child devices goes to runtime suspend.
>>
>> Signed-off-by: Krishna chaitanya chundru <[email protected]>
>> ---
>> drivers/pci/controller/dwc/pcie-designware-host.c | 4 ++++
>> 1 file changed, 4 insertions(+)
>>
>> diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
>> index d5fc31f8345f..57756a73df30 100644
>> --- a/drivers/pci/controller/dwc/pcie-designware-host.c
>> +++ b/drivers/pci/controller/dwc/pcie-designware-host.c
>> @@ -16,6 +16,7 @@
>> #include <linux/of_pci.h>
>> #include <linux/pci_regs.h>
>> #include <linux/platform_device.h>
>> +#include <linux/pm_runtime.h>
>>
>> #include "../../pci.h"
>> #include "pcie-designware.h"
>> @@ -505,6 +506,9 @@ int dw_pcie_host_init(struct dw_pcie_rp *pp)
>> if (pp->ops->post_init)
>> pp->ops->post_init(pp);
>>
>> + pm_runtime_set_active(&bridge->dev);
>> + pm_runtime_enable(&bridge->dev);
>> +
>> return 0;
>>
>> err_stop_link:
>>
>> ---
>> base-commit: 6613476e225e090cc9aad49be7fa504e290dd33d
>> change-id: 20240219-runtime_pm_enable-bdc17914bd50
>>
>> Best regards,
>> --
>> Krishna chaitanya chundru <[email protected]>
>>
>