2024-02-19 12:27:00

by Alexander Stein

Subject: [RESEND 1/2] drm: fsl-dcu: Use dev_err_probe

fsl_dcu_drm_modeset_init can return -EPROBE_DEFER, so use dev_err_probe
to remove an invalid error message and add it to deferral description.

Signed-off-by: Alexander Stein <[email protected]>
---
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
index a395f93449f3..90cbd18f096d 100644
--- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
+++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
@@ -103,10 +103,8 @@ static int fsl_dcu_load(struct drm_device *dev, unsigned long flags)
int ret;

ret = fsl_dcu_drm_modeset_init(fsl_dev);
- if (ret < 0) {
- dev_err(dev->dev, "failed to initialize mode setting\n");
- return ret;
- }
+ if (ret < 0)
+ return dev_err_probe(dev->dev, ret, "failed to initialize mode setting\n");

ret = drm_vblank_init(dev, dev->mode_config.num_crtc);
if (ret < 0) {
--
2.34.1

2024-02-19 12:27:05

by Alexander Stein

Subject: [RESEND 2/2] drm: fsl-dcu: enable PIXCLK on LS1021A

From: Matthias Schiffer <[email protected]>

The PIXCLK needs to be enabled in SCFG before accessing certain DCU
registers, or the access will hang.

Signed-off-by: Matthias Schiffer <[email protected]>
Signed-off-by: Alexander Stein <[email protected]>
---
drivers/gpu/drm/fsl-dcu/Kconfig | 1 +
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c | 14 ++++++++++++++
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h | 3 +++
3 files changed, 18 insertions(+)

diff --git a/drivers/gpu/drm/fsl-dcu/Kconfig b/drivers/gpu/drm/fsl-dcu/Kconfig
index 5ca71ef87325..c9ee98693b48 100644
--- a/drivers/gpu/drm/fsl-dcu/Kconfig
+++ b/drivers/gpu/drm/fsl-dcu/Kconfig
@@ -8,6 +8,7 @@ config DRM_FSL_DCU
select DRM_PANEL
select REGMAP_MMIO
select VIDEOMODE_HELPERS
+ select MFD_SYSCON if SOC_LS1021A
help
Choose this option if you have an Freescale DCU chipset.
If M is selected the module will be called fsl-dcu-drm.
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
index 90cbd18f096d..283858350961 100644
--- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
+++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
@@ -100,12 +100,26 @@ static void fsl_dcu_irq_uninstall(struct drm_device *dev)
static int fsl_dcu_load(struct drm_device *dev, unsigned long flags)
{
struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
+ struct regmap *scfg;
int ret;

ret = fsl_dcu_drm_modeset_init(fsl_dev);
if (ret < 0)
return dev_err_probe(dev->dev, ret, "failed to initialize mode setting\n");

+ scfg = syscon_regmap_lookup_by_compatible("fsl,ls1021a-scfg");
+ if (PTR_ERR(scfg) != -ENODEV) {
+ /*
+ * For simplicity, enable the PIXCLK unconditionally. Disabling
+ * the clock in PM or on unload could be implemented as a future
+ * improvement.
+ */
+ ret = regmap_update_bits(scfg, SCFG_PIXCLKCR, SCFG_PIXCLKCR_PXCEN,
+ SCFG_PIXCLKCR_PXCEN);
+ if (ret < 0)
+ return dev_err_probe(dev->dev, ret, "failed to enable pixclk\n");
+ }
+
ret = drm_vblank_init(dev, dev->mode_config.num_crtc);
if (ret < 0) {
dev_err(dev->dev, "failed to initialize vblank\n");
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
index e2049a0e8a92..566396013c04 100644
--- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
+++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
@@ -160,6 +160,9 @@
#define FSL_DCU_ARGB4444 12
#define FSL_DCU_YUV422 14

+#define SCFG_PIXCLKCR 0x28
+#define SCFG_PIXCLKCR_PXCEN BIT(31)
+
#define VF610_LAYER_REG_NUM 9
#define LS1021A_LAYER_REG_NUM 10

--
2.34.1