V6:
- Add of camss.yaml passes on linux-stable/master as at
commit: ff93872a9c61 ("clk: qcom: camcc-sc8280xp: Add sc8280xp CAMCC")
- Fixed IFE/VFE comment discongruity - Konrad
- Per my explaination I don't propose to change IFE/VFE naming since
they are the same thing.
SFE blocks should be named SFE though, not IFE/VFE
- Referring to Konrad's other comments on IFE/VFE naming
https://lore.kernel.org/all/[email protected]/#t
The next two changes I intend not covered in this SoC series
a) Completing the conversion to named power-domains
b) Camera NOC => OPPs for the camera NoC
Not covered in this series though.
Link to v5: https://lore.kernel.org/r/[email protected]
Link to tree: https://git.codelinaro.org/bryan.odonoghue/kernel/-/tree/b4/camss-sc8280xp-v6
Bootable: https://git.codelinaro.org/bryan.odonoghue/kernel/-/tree/sc8280xp-v6.8-rc4-camss?ref_type=heads
V5:
- Fixes the lower case 0x0c to 0x0C not sure how Konrad even saw this.
- Drops frequency table to just individual frequencies not full array of
opps - Konrad
- As explained doesn't change the finding of frequencies.
Current array size will ensure testing if (freq[x]) succeeds though I
do agree this should be changed up.
Plan to restructure struct params for specificity to VFE, CSID and will
incorporate this change then.
Link: https://lore.kernel.org/all/[email protected]
- Reset sequence
Right now the reset works. I agree qcom's downstream has more stuff in
it. I've logged a task to evaluate expansion of the reset and to test
across multiple platforms.
For now not required for this drop.
- _src clocks
One assumes the reason at some stage in time we didn't have SET_PARENT in
our CAMCC which meant setting _src clocks was necessary. In any case it
ought not to be necessary now.
Removing the _src from existing platforms should be trivial however we
might find that as a result some of the CAMCC drivers need to be updated.
That obviously is a separate series.
Link to v4: https://lore.kernel.org/r/[email protected]
Link to tree: https://git.codelinaro.org/bryan.odonoghue/kernel/-/tree/b4/camss-sc8280xp-v5
V4:
- Drops all _src clocks and _SRC indexes in series.
True enough the CAMCC driver has all of the appropriate SET_PARENT flags
so there's no need to represent _src clocks. - Konrad
- I've opted not to split C-PHY and D-PHY init sequences up unless/until
we have a C-PHY init sequence upstream. - bod/Konrad
- b4 trailes --update -> + Konrad's Acks
Link to v3: https://lore.kernel.org/r/[email protected]
Link to tree: https://git.codelinaro.org/bryan.odonoghue/kernel/-/tree/b4/camss-sc8280xp-v4
V3:
- Strip pointer to dependencies from yaml patch
I was hoping the robot would understand the links but it doesn't -
Krzysztof
Link to v2: https://lore.kernel.org/r/[email protected]
b4 base:
https://git.codelinaro.org/bryan.odonoghue/kernel/-/tree/b4/camss-sc8280xp-v3
V2:
- Rebase to capture is_lite flag from named power-domain series
- Amends commit log of final patch to give more detail on rename - Konrad
- Opted not to change switch() statements with returns. - bod/Konrad
Requires CAMCC for sc8280xp which applies to qcom/clk-for-6.7:
https://lore.kernel.org/linux-arm-msm/[email protected]/
b4 shazam [email protected]
Requires the named power-domain patches which apply to media-tree/*:
https://lore.kernel.org/linux-arm-msm/20231103-b4-camss-named-power-domains-v4-0-33a905359dbc@linaro.org/
b4 shazam [email protected]
Link to v1:
https://lore.kernel.org/r/[email protected]
b4 base:
https://git.codelinaro.org/bryan.odonoghue/kernel/-/tree/b4/camss-sc8280xp-v2
V1:
sc8280xp is the SoC found in the Lenovo X13s. This series adds support to
bring up the CSIPHY, CSID, VFE/RDI interfaces.
A number of precursor patches make this series smaller overall than
previous series.
sc8280xp provides
- 4 x VFE, 4 RDI per VFE
- 4 x VFE Lite, 4 RDI per VFE
- 4 x CSID
- 4 x CSID Lite
- 4 x CSI PHY
I've taken the yaml from a dtsi series and included it here since 1) I sent
the yaml to the wrong person and 2) it already has RB from Krzysztof.
Requires CAMCC for sc8280xp which applies to qcom/clk-for-6.7:
https://lore.kernel.org/linux-arm-msm/[email protected]/
b4 shazam [email protected]
Requires the named power-domain patches which apply to media-tree/* :
https://lore.kernel.org/linux-arm-msm/20231101-b4-camss-named-power-domains-v3-5-bbdf5f22462a@linaro.org/
b4 shazam 20231101-b4-camss-named-power-domains-v3-5-bbdf5f22462a@linaro.org
To use the camera on x13s with say Google Hangouts or Microsoft Teams you
will need to
1. Run Firefox
2. Update about:config to enable pipewire
3. Use this WIP version of libcamera
https://gitlab.freedesktop.org/camera/libcamera-softisp
A working bootable tree can be found here:
Link: https://git.codelinaro.org/bryan.odonoghue/kernel/-/tree/lenovo-x13s-linux-6.5.y
b4 base:
https://git.codelinaro.org/bryan.odonoghue/kernel/-/tree/b4/camss-sc8280xp
Signed-off-by: Bryan O'Donoghue <[email protected]>
---
Bryan O'Donoghue (6):
media: dt-bindings: media: camss: Add qcom,sc8280xp-camss binding
media: qcom: camss: csiphy-3ph: Add Gen2 v1.1 two-phase MIPI CSI-2 DPHY init
media: qcom: camss: Add CAMSS_SC8280XP enum
media: qcom: camss: Add sc8280xp resources
media: qcom: camss: Add sc8280xp support
media: qcom: camss: vfe-17x: Rename camss-vfe-170 to camss-vfe-17x
.../bindings/media/qcom,sc8280xp-camss.yaml | 512 +++++++++++++++++++++
drivers/media/platform/qcom/camss/Makefile | 2 +-
.../platform/qcom/camss/camss-csiphy-3ph-1-0.c | 108 ++++-
drivers/media/platform/qcom/camss/camss-csiphy.c | 1 +
.../camss/{camss-vfe-170.c => camss-vfe-17x.c} | 0
drivers/media/platform/qcom/camss/camss-vfe.c | 25 +-
drivers/media/platform/qcom/camss/camss-video.c | 1 +
drivers/media/platform/qcom/camss/camss.c | 307 ++++++++++++
drivers/media/platform/qcom/camss/camss.h | 1 +
9 files changed, 948 insertions(+), 9 deletions(-)
---
base-commit: e31185ce00a96232308300008db193416ceb9769
change-id: 20231101-b4-camss-sc8280xp-0e1b91eb21bf
Best regards,
--
Bryan O'Donoghue <[email protected]>
Add a PHY configuration sequence for the sc8280xp which uses a Qualcomm
Gen 2 version 1.1 CSI-2 PHY.
The PHY can be configured as two phase or three phase in C-PHY or D-PHY
mode. This configuration supports two-phase D-PHY mode.
Reviewed-by: Konrad Dybcio <[email protected]>
Signed-off-by: Bryan O'Donoghue <[email protected]>
---
.../platform/qcom/camss/camss-csiphy-3ph-1-0.c | 85 ++++++++++++++++++++++
1 file changed, 85 insertions(+)
diff --git a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
index f50e2235c37f..66ff48aeab64 100644
--- a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
+++ b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
@@ -148,6 +148,91 @@ csiphy_reg_t lane_regs_sdm845[5][14] = {
},
};
+/* GEN2 1.1 2PH */
+static const struct
+csiphy_reg_t lane_regs_sc8280xp[5][14] = {
+ {
+ {0x0004, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x002C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0034, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x001C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0014, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0028, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+ {0x003C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0000, 0x90, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0008, 0x0E, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+ {0x000C, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+ {0x0010, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0038, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0060, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0064, 0x7F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ },
+ {
+ {0x0704, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x072C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0734, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x071C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0714, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0728, 0x04, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x073C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0700, 0x80, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0708, 0x0E, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+ {0x070C, 0xA5, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0710, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0738, 0x1F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0760, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0764, 0x7F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ },
+ {
+ {0x0204, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x022C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0234, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x021C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0214, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0228, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+ {0x023C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0200, 0x90, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0208, 0x0E, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+ {0x020C, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+ {0x0210, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0238, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0260, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0264, 0x7F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ },
+ {
+ {0x0404, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x042C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0434, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x041C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0414, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0428, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+ {0x043C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0400, 0x90, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0408, 0x0E, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+ {0x040C, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+ {0x0410, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0438, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0460, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0464, 0x7F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ },
+ {
+ {0x0604, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x062C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0634, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x061C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0614, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0628, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+ {0x063C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0600, 0x90, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0608, 0x0E, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+ {0x060C, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+ {0x0610, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0638, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0660, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0664, 0x7F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ },
+};
+
/* GEN2 1.2.1 2PH */
static const struct
csiphy_reg_t lane_regs_sm8250[5][20] = {
--
2.43.0
This commit describes the hardware layout for the sc8280xp for the
following hardware blocks:
- 4 x VFE, 4 RDI per VFE
- 4 x VFE Lite, 4 RDI per VFE
- 4 x CSID
- 4 x CSID Lite
- 4 x CSI PHY
Signed-off-by: Bryan O'Donoghue <[email protected]>
---
Depends on:
Link: https://lore.kernel.org/linux-arm-msm/20240111-linux-next-24-01-02-sc8280xp-camss-core-dtsi-v4-2-cdd5c57ff1dc@linaro.org
---
drivers/media/platform/qcom/camss/camss.c | 307 ++++++++++++++++++++++++++++++
1 file changed, 307 insertions(+)
diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
index 58f4be660290..1923615f0eea 100644
--- a/drivers/media/platform/qcom/camss/camss.c
+++ b/drivers/media/platform/qcom/camss/camss.c
@@ -941,6 +941,298 @@ static const struct resources_icc icc_res_sm8250[] = {
},
};
+static const struct camss_subdev_resources csiphy_res_sc8280xp[] = {
+ /* CSIPHY0 */
+ {
+ .regulators = {},
+ .clock = { "csiphy0", "csiphy0_timer" },
+ .clock_rate = { { 400000000 },
+ { 300000000 } },
+ .reg = { "csiphy0" },
+ .interrupt = { "csiphy0" },
+ .ops = &csiphy_ops_3ph_1_0
+ },
+ /* CSIPHY1 */
+ {
+ .regulators = {},
+ .clock = { "csiphy1", "csiphy1_timer" },
+ .clock_rate = { { 400000000 },
+ { 300000000 } },
+ .reg = { "csiphy1" },
+ .interrupt = { "csiphy1" },
+ .ops = &csiphy_ops_3ph_1_0
+ },
+ /* CSIPHY2 */
+ {
+ .regulators = {},
+ .clock = { "csiphy2", "csiphy2_timer" },
+ .clock_rate = { { 400000000 },
+ { 300000000 } },
+ .reg = { "csiphy2" },
+ .interrupt = { "csiphy2" },
+ .ops = &csiphy_ops_3ph_1_0
+ },
+ /* CSIPHY3 */
+ {
+ .regulators = {},
+ .clock = { "csiphy3", "csiphy3_timer" },
+ .clock_rate = { { 400000000 },
+ { 300000000 } },
+ .reg = { "csiphy3" },
+ .interrupt = { "csiphy3" },
+ .ops = &csiphy_ops_3ph_1_0
+ },
+};
+
+static const struct camss_subdev_resources csid_res_sc8280xp[] = {
+ /* CSID0 */
+ {
+ .regulators = { "vdda-phy", "vdda-pll" },
+ .clock = { "vfe0_csid", "vfe0_cphy_rx", "vfe0", "vfe0_axi" },
+ .clock_rate = { { 400000000, 480000000, 600000000 },
+ { 0 },
+ { 0 },
+ { 0 } },
+ .reg = { "csid0" },
+ .interrupt = { "csid0" },
+ .ops = &csid_ops_gen2
+ },
+ /* CSID1 */
+ {
+ .regulators = { "vdda-phy", "vdda-pll" },
+ .clock = { "vfe1_csid", "vfe1_cphy_rx", "vfe1", "vfe1_axi" },
+ .clock_rate = { { 400000000, 480000000, 600000000 },
+ { 0 },
+ { 0 },
+ { 0 } },
+ .reg = { "csid1" },
+ .interrupt = { "csid1" },
+ .ops = &csid_ops_gen2
+ },
+ /* CSID2 */
+ {
+ .regulators = { "vdda-phy", "vdda-pll" },
+ .clock = { "vfe2_csid", "vfe2_cphy_rx", "vfe2", "vfe2_axi" },
+ .clock_rate = { { 400000000, 480000000, 600000000 },
+ { 0 },
+ { 0 },
+ { 0 } },
+ .reg = { "csid2" },
+ .interrupt = { "csid2" },
+ .ops = &csid_ops_gen2
+ },
+ /* CSID3 */
+ {
+ .regulators = { "vdda-phy", "vdda-pll" },
+ .clock = { "vfe3_csid", "vfe3_cphy_rx", "vfe3", "vfe3_axi" },
+ .clock_rate = { { 400000000, 480000000, 600000000 },
+ { 0 },
+ { 0 },
+ { 0 } },
+ .reg = { "csid3" },
+ .interrupt = { "csid3" },
+ .ops = &csid_ops_gen2
+ },
+ /* CSID_LITE0 */
+ {
+ .regulators = { "vdda-phy", "vdda-pll" },
+ .clock = { "vfe_lite0_csid", "vfe_lite0_cphy_rx", "vfe_lite0" },
+ .clock_rate = { { 400000000, 480000000, 600000000 },
+ { 0 },
+ { 0 }, },
+ .reg = { "csid0_lite" },
+ .interrupt = { "csid0_lite" },
+ .is_lite = true,
+ .ops = &csid_ops_gen2
+ },
+ /* CSID_LITE1 */
+ {
+ .regulators = { "vdda-phy", "vdda-pll" },
+ .clock = { "vfe_lite1_csid", "vfe_lite1_cphy_rx", "vfe_lite1" },
+ .clock_rate = { { 400000000, 480000000, 600000000 },
+ { 0 },
+ { 0 }, },
+ .reg = { "csid1_lite" },
+ .interrupt = { "csid1_lite" },
+ .is_lite = true,
+ .ops = &csid_ops_gen2
+ },
+ /* CSID_LITE2 */
+ {
+ .regulators = { "vdda-phy", "vdda-pll" },
+ .clock = { "vfe_lite2_csid", "vfe_lite2_cphy_rx", "vfe_lite2" },
+ .clock_rate = { { 400000000, 480000000, 600000000 },
+ { 0 },
+ { 0 }, },
+ .reg = { "csid2_lite" },
+ .interrupt = { "csid2_lite" },
+ .is_lite = true,
+ .ops = &csid_ops_gen2
+ },
+ /* CSID_LITE3 */
+ {
+ .regulators = { "vdda-phy", "vdda-pll" },
+ .clock = { "vfe_lite3_csid", "vfe_lite3_cphy_rx", "vfe_lite3" },
+ .clock_rate = { { 400000000, 480000000, 600000000 },
+ { 0 },
+ { 0 }, },
+ .reg = { "csid3_lite" },
+ .interrupt = { "csid3_lite" },
+ .is_lite = true,
+ .ops = &csid_ops_gen2
+ }
+};
+
+static const struct camss_subdev_resources vfe_res_sc8280xp[] = {
+ /* VFE0 */
+ {
+ .regulators = {},
+ .clock = { "gcc_axi_hf", "gcc_axi_sf", "cpas_ahb", "camnoc_axi", "vfe0", "vfe0_axi" },
+ .clock_rate = { { 0 },
+ { 0 },
+ { 19200000, 80000000},
+ { 19200000, 150000000, 266666667, 320000000, 400000000, 480000000 },
+ { 400000000, 558000000, 637000000, 760000000 },
+ { 0 }, },
+ .reg = { "vfe0" },
+ .interrupt = { "vfe0" },
+ .pd_name = "ife0",
+ .line_num = 4,
+ .ops = &vfe_ops_170
+ },
+ /* VFE1 */
+ {
+ .regulators = {},
+ .clock = { "gcc_axi_hf", "gcc_axi_sf", "cpas_ahb", "camnoc_axi", "vfe1", "vfe1_axi" },
+ .clock_rate = { { 0 },
+ { 0 },
+ { 19200000, 80000000},
+ { 19200000, 150000000, 266666667, 320000000, 400000000, 480000000 },
+ { 400000000, 558000000, 637000000, 760000000 },
+ { 0 }, },
+ .reg = { "vfe1" },
+ .interrupt = { "vfe1" },
+ .pd_name = "ife1",
+ .line_num = 4,
+ .ops = &vfe_ops_170
+ },
+ /* VFE2 */
+ {
+ .regulators = {},
+ .clock = { "gcc_axi_hf", "gcc_axi_sf", "cpas_ahb", "camnoc_axi", "vfe2", "vfe2_axi" },
+ .clock_rate = { { 0 },
+ { 0 },
+ { 19200000, 80000000},
+ { 19200000, 150000000, 266666667, 320000000, 400000000, 480000000 },
+ { 400000000, 558000000, 637000000, 760000000 },
+ { 0 }, },
+ .reg = { "vfe2" },
+ .interrupt = { "vfe2" },
+ .pd_name = "ife2",
+ .line_num = 4,
+ .ops = &vfe_ops_170
+ },
+ /* VFE3 */
+ {
+ .regulators = {},
+ .clock = { "gcc_axi_hf", "gcc_axi_sf", "cpas_ahb", "camnoc_axi", "vfe3", "vfe3_axi" },
+ .clock_rate = { { 0 },
+ { 0 },
+ { 19200000, 80000000},
+ { 19200000, 150000000, 266666667, 320000000, 400000000, 480000000 },
+ { 400000000, 558000000, 637000000, 760000000 },
+ { 0 }, },
+ .reg = { "vfe3" },
+ .interrupt = { "vfe3" },
+ .pd_name = "ife3",
+ .line_num = 4,
+ .ops = &vfe_ops_170
+ },
+ /* VFE_LITE_0 */
+ {
+ .regulators = {},
+ .clock = { "gcc_axi_hf", "gcc_axi_sf", "cpas_ahb", "camnoc_axi", "vfe_lite0" },
+ .clock_rate = { { 0 },
+ { 0 },
+ { 19200000, 80000000},
+ { 19200000, 150000000, 266666667, 320000000, 400000000, 480000000 },
+ { 320000000, 400000000, 480000000, 600000000 }, },
+ .reg = { "vfe_lite0" },
+ .interrupt = { "vfe_lite0" },
+ .is_lite = true,
+ .line_num = 4,
+ .ops = &vfe_ops_170
+ },
+ /* VFE_LITE_1 */
+ {
+ .regulators = {},
+ .clock = { "gcc_axi_hf", "gcc_axi_sf", "cpas_ahb", "camnoc_axi", "vfe_lite1" },
+ .clock_rate = { { 0 },
+ { 0 },
+ { 19200000, 80000000},
+ { 19200000, 150000000, 266666667, 320000000, 400000000, 480000000 },
+ { 320000000, 400000000, 480000000, 600000000 }, },
+ .reg = { "vfe_lite1" },
+ .interrupt = { "vfe_lite1" },
+ .is_lite = true,
+ .line_num = 4,
+ .ops = &vfe_ops_170
+ },
+ /* VFE_LITE_2 */
+ {
+ .regulators = {},
+ .clock = { "gcc_axi_hf", "gcc_axi_sf", "cpas_ahb", "camnoc_axi", "vfe_lite2" },
+ .clock_rate = { { 0 },
+ { 0 },
+ { 19200000, 80000000},
+ { 19200000, 150000000, 266666667, 320000000, 400000000, 480000000 },
+ { 320000000, 400000000, 480000000, 600000000, }, },
+ .reg = { "vfe_lite2" },
+ .interrupt = { "vfe_lite2" },
+ .is_lite = true,
+ .line_num = 4,
+ .ops = &vfe_ops_170
+ },
+ /* VFE_LITE_3 */
+ {
+ .regulators = {},
+ .clock = { "gcc_axi_hf", "gcc_axi_sf", "cpas_ahb", "camnoc_axi", "vfe_lite3" },
+ .clock_rate = { { 0 },
+ { 0 },
+ { 19200000, 80000000},
+ { 19200000, 150000000, 266666667, 320000000, 400000000, 480000000 },
+ { 320000000, 400000000, 480000000, 600000000 }, },
+ .reg = { "vfe_lite3" },
+ .interrupt = { "vfe_lite3" },
+ .is_lite = true,
+ .line_num = 4,
+ .ops = &vfe_ops_170
+ },
+};
+
+static const struct resources_icc icc_res_sc8280xp[] = {
+ {
+ .name = "cam_ahb",
+ .icc_bw_tbl.avg = 150000,
+ .icc_bw_tbl.peak = 300000,
+ },
+ {
+ .name = "cam_hf_mnoc",
+ .icc_bw_tbl.avg = 2097152,
+ .icc_bw_tbl.peak = 2097152,
+ },
+ {
+ .name = "cam_sf_mnoc",
+ .icc_bw_tbl.avg = 2097152,
+ .icc_bw_tbl.peak = 2097152,
+ },
+ {
+ .name = "cam_sf_icp_mnoc",
+ .icc_bw_tbl.avg = 2097152,
+ .icc_bw_tbl.peak = 2097152,
+ },
+};
+
/*
* camss_add_clock_margin - Add margin to clock frequency rate
* @rate: Clock frequency rate
@@ -1826,12 +2118,27 @@ static const struct camss_resources sm8250_resources = {
.vfe_num = ARRAY_SIZE(vfe_res_8250),
};
+static const struct camss_resources sc8280xp_resources = {
+ .version = CAMSS_8280XP,
+ .pd_name = "top",
+ .csiphy_res = csiphy_res_sc8280xp,
+ .csid_res = csid_res_sc8280xp,
+ .ispif_res = NULL,
+ .vfe_res = vfe_res_sc8280xp,
+ .icc_res = icc_res_sc8280xp,
+ .icc_path_num = ARRAY_SIZE(icc_res_sc8280xp),
+ .csiphy_num = ARRAY_SIZE(csiphy_res_sc8280xp),
+ .csid_num = ARRAY_SIZE(csid_res_sc8280xp),
+ .vfe_num = ARRAY_SIZE(vfe_res_sc8280xp),
+};
+
static const struct of_device_id camss_dt_match[] = {
{ .compatible = "qcom,msm8916-camss", .data = &msm8916_resources },
{ .compatible = "qcom,msm8996-camss", .data = &msm8996_resources },
{ .compatible = "qcom,sdm660-camss", .data = &sdm660_resources },
{ .compatible = "qcom,sdm845-camss", .data = &sdm845_resources },
{ .compatible = "qcom,sm8250-camss", .data = &sm8250_resources },
+ { .compatible = "qcom,sc8280xp-camss", .data = &sc8280xp_resources },
{ }
};
--
2.43.0
Add in functional logic throughout the code to support the sc8280xp.
Acked-by: Konrad Dybcio <[email protected]>
Signed-off-by: Bryan O'Donoghue <[email protected]>
---
.../platform/qcom/camss/camss-csiphy-3ph-1-0.c | 23 +++++++++++++++++---
drivers/media/platform/qcom/camss/camss-csiphy.c | 1 +
drivers/media/platform/qcom/camss/camss-vfe.c | 25 +++++++++++++++++-----
drivers/media/platform/qcom/camss/camss-video.c | 1 +
4 files changed, 42 insertions(+), 8 deletions(-)
diff --git a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
index 66ff48aeab64..df7e93a5a4f6 100644
--- a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
+++ b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
@@ -513,6 +513,10 @@ static void csiphy_gen2_config_lanes(struct csiphy_device *csiphy,
r = &lane_regs_sm8250[0][0];
array_size = ARRAY_SIZE(lane_regs_sm8250[0]);
break;
+ case CAMSS_8280XP:
+ r = &lane_regs_sc8280xp[0][0];
+ array_size = ARRAY_SIZE(lane_regs_sc8280xp[0]);
+ break;
default:
WARN(1, "unknown cspi version\n");
return;
@@ -548,13 +552,26 @@ static u8 csiphy_get_lane_mask(struct csiphy_lanes_cfg *lane_cfg)
return lane_mask;
}
+static bool csiphy_is_gen2(u32 version)
+{
+ bool ret = false;
+
+ switch (version) {
+ case CAMSS_845:
+ case CAMSS_8250:
+ case CAMSS_8280XP:
+ ret = true;
+ break;
+ }
+
+ return ret;
+}
+
static void csiphy_lanes_enable(struct csiphy_device *csiphy,
struct csiphy_config *cfg,
s64 link_freq, u8 lane_mask)
{
struct csiphy_lanes_cfg *c = &cfg->csi2->lane_cfg;
- bool is_gen2 = (csiphy->camss->res->version == CAMSS_845 ||
- csiphy->camss->res->version == CAMSS_8250);
u8 settle_cnt;
u8 val;
int i;
@@ -576,7 +593,7 @@ static void csiphy_lanes_enable(struct csiphy_device *csiphy,
val = 0x00;
writel_relaxed(val, csiphy->base + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(0));
- if (is_gen2)
+ if (csiphy_is_gen2(csiphy->camss->res->version))
csiphy_gen2_config_lanes(csiphy, settle_cnt);
else
csiphy_gen1_config_lanes(csiphy, cfg, settle_cnt);
diff --git a/drivers/media/platform/qcom/camss/camss-csiphy.c b/drivers/media/platform/qcom/camss/camss-csiphy.c
index 264c99efeae8..45b3a8e5dea4 100644
--- a/drivers/media/platform/qcom/camss/camss-csiphy.c
+++ b/drivers/media/platform/qcom/camss/camss-csiphy.c
@@ -578,6 +578,7 @@ int msm_csiphy_subdev_init(struct camss *camss,
break;
case CAMSS_845:
case CAMSS_8250:
+ case CAMSS_8280XP:
csiphy->formats = csiphy_formats_sdm845;
csiphy->nformats = ARRAY_SIZE(csiphy_formats_sdm845);
break;
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
index 2062be668f49..d875237cf244 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe.c
@@ -225,6 +225,7 @@ static u32 vfe_src_pad_code(struct vfe_line *line, u32 sink_code,
case CAMSS_660:
case CAMSS_845:
case CAMSS_8250:
+ case CAMSS_8280XP:
switch (sink_code) {
case MEDIA_BUS_FMT_YUYV8_1X16:
{
@@ -1518,6 +1519,7 @@ int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe,
break;
case CAMSS_845:
case CAMSS_8250:
+ case CAMSS_8280XP:
l->formats = formats_rdi_845;
l->nformats = ARRAY_SIZE(formats_rdi_845);
break;
@@ -1595,6 +1597,23 @@ static const struct media_entity_operations vfe_media_ops = {
.link_validate = v4l2_subdev_link_validate,
};
+static int vfe_bpl_align(struct vfe_device *vfe)
+{
+ int ret = 8;
+
+ switch (vfe->camss->res->version) {
+ case CAMSS_845:
+ case CAMSS_8250:
+ case CAMSS_8280XP:
+ ret = 16;
+ break;
+ default:
+ break;
+ }
+
+ return ret;
+}
+
/*
* msm_vfe_register_entities - Register subdev node for VFE module
* @vfe: VFE device
@@ -1661,11 +1680,7 @@ int msm_vfe_register_entities(struct vfe_device *vfe,
}
video_out->ops = &vfe->video_ops;
- if (vfe->camss->res->version == CAMSS_845 ||
- vfe->camss->res->version == CAMSS_8250)
- video_out->bpl_alignment = 16;
- else
- video_out->bpl_alignment = 8;
+ video_out->bpl_alignment = vfe_bpl_align(vfe);
video_out->line_based = 0;
if (i == VFE_LINE_PIX) {
video_out->bpl_alignment = 16;
diff --git a/drivers/media/platform/qcom/camss/camss-video.c b/drivers/media/platform/qcom/camss/camss-video.c
index a89da5ef4710..54cd82f74115 100644
--- a/drivers/media/platform/qcom/camss/camss-video.c
+++ b/drivers/media/platform/qcom/camss/camss-video.c
@@ -1028,6 +1028,7 @@ int msm_video_register(struct camss_video *video, struct v4l2_device *v4l2_dev,
break;
case CAMSS_845:
case CAMSS_8250:
+ case CAMSS_8280XP:
video->formats = formats_rdi_845;
video->nformats = ARRAY_SIZE(formats_rdi_845);
break;
--
2.43.0
On 2/22/24 18:17, Bryan O'Donoghue wrote:
> This commit describes the hardware layout for the sc8280xp for the
> following hardware blocks:
>
> - 4 x VFE, 4 RDI per VFE
> - 4 x VFE Lite, 4 RDI per VFE
> - 4 x CSID
> - 4 x CSID Lite
> - 4 x CSI PHY
>
> Signed-off-by: Bryan O'Donoghue <[email protected]>
>
> ---
Acked-by: Konrad Dybcio <[email protected]>
Konrad