As the subject states this series is an attempt to harmonize the xHCI,
EHCI, OHCI and DWC USB3 DT nodes with the DT schema introduced in the
framework of the patchset [1].
Firstly as Krzysztof suggested we've deprecated a support of DWC USB3
controllers with "synopsys,"-vendor prefix compatible string in favor of
the ones with valid "snps,"-prefix. It's done in all the DTS files,
which have been unfortunate to define such nodes.
Secondly we suggest to fix the snps,quirk-frame-length-adjustment property
declaration in the Amlogic meson-g12-common.dtsi DTS file, since it has
been erroneously declared as boolean while having uint32 type. Neil said
it was ok to init that property with 0x20 value.
Thirdly the main part of the patchset concern fixing the xHCI, EHCI/OHCI
and DWC USB3 DT nodes name as in accordance with their DT schema the
corresponding node name is suppose to comply with the Generic USB HCD DT
schema, which requires the USB nodes to have the name acceptable by the
regexp: "^usb(@.*)?". Such requirement had been applicable even before we
introduced the new DT schema in [1], but as we can see it hasn't been
strictly implemented for a lot the DTS files. Since DT schema is now
available the automated DTS validation shall make sure that the rule isn't
violated.
Note most of these patches have been a part of the last three patches of
[1]. But since there is no way to have them merged in in a combined
manner, I had to move them to the dedicated series and split them up so to
be accepted by the corresponding subsystem maintainers one-by-one.
[1] Link: https://lore.kernel.org/linux-usb/[email protected]
Changelog v1:
- As Krzysztof suggested I've created a script which checked whether the
node names had been also updated in all the depended dts files. As a
result I found two more files which should have been also modified:
arch/arc/boot/dts/{axc003.dtsi,axc003_idu.dtsi}
- Correct the USB DWC3 nodes name found in
arch/arm64/boot/dts/apm/{apm-storm.dtsi,apm-shadowcat.dtsi} too.
Link: https://lore.kernel.org/linux-usb/[email protected]
Changelog v2:
- Drop the patch:
[PATCH 01/29] usb: dwc3: Discard synopsys,dwc3 compatibility string
and get back the one which marks the "synopsys,dwc3" compatible string
as deprecated into the DT schema related series.
- Drop the patches:
[PATCH 03/29] arm: dts: am437x: Correct DWC USB3 compatible string
[PATCH 04/29] arm: dts: exynos: Correct DWC USB3 compatible string
[PATCH 07/29] arm: dts: bcm53x: Harmonize EHCI/OHCI DT nodes name
[PATCH 08/29] arm: dts: stm32: Harmonize EHCI/OHCI DT nodes name
[PATCH 16/29] arm: dts: bcm5301x: Harmonize xHCI DT nodes name
[PATCH 19/29] arm: dts: exynos: Harmonize DWC USB3 DT nodes name
[PATCH 21/29] arm: dts: ls1021a: Harmonize DWC USB3 DT nodes name
[PATCH 22/29] arm: dts: omap5: Harmonize DWC USB3 DT nodes name
[PATCH 24/29] arm64: dts: allwinner: h6: Harmonize DWC USB3 DT nodes name
[PATCH 26/29] arm64: dts: exynos: Harmonize DWC USB3 DT nodes name
[PATCH 27/29] arm64: dts: layerscape: Harmonize DWC USB3 DT nodes name
since they have been applied to the corresponding maintainers repos.
- Fix drivers/usb/dwc3/dwc3-qcom.c to be looking for the "usb@"-prefixed
sub-node and falling back to the "dwc3@"-prefixed one on failure.
Link: https://lore.kernel.org/linux-usb/[email protected]
Changelog v3:
- Drop the patches:
[PATCH v2 04/18] arm: dts: hisi-x5hd2: Harmonize EHCI/OHCI DT nodes name
[PATCH v2 06/18] arm64: dts: hisi: Harmonize EHCI/OHCI DT nodes name
[PATCH v2 07/18] mips: dts: jz47x: Harmonize EHCI/OHCI DT nodes name
[PATCH v2 08/18] mips: dts: sead3: Harmonize EHCI/OHCI DT nodes name
[PATCH v2 09/18] mips: dts: ralink: mt7628a: Harmonize EHCI/OHCI DT nodes name
[PATCH v2 11/18] arm64: dts: marvell: cp11x: Harmonize xHCI DT nodes name
[PATCH v2 12/18] arm: dts: marvell: armada-375: Harmonize DWC USB3 DT nodes name
[PATCH v2 16/18] arm64: dts: hi3660: Harmonize DWC USB3 DT nodes name
since they have been applied to the corresponding maintainers repos.
Link: https://lore.kernel.org/linux-usb/[email protected]
Changelog v4:
- Just resend.
Link: https://lore.kernel.org/linux-usb/[email protected]
Changelog v5:
- Drop the patch:
[PATCH v4 02/10] arm64: dts: amlogic: meson-g12: Set FL-adj property value
since it has been applied to the corresponding maintainers repos.
- Get back the patch:
[PATCH 21/29] arm: dts: ls1021a: Harmonize DWC USB3 DT nodes name
as it has been missing in the kernel 5.11-rc7
- Rebase onto the kernel 5.11-rc7.
Link: https://lore.kernel.org/lkml/[email protected]
Changelog v6:
- Just resend and add linux-usb.vger.kernel.org to the list of Ccecipients.
Link: https://lore.kernel.org/linux-usb/[email protected]
Link: https://lore.kernel.org/linux-usb/[email protected]
Changelog v7:
- Replace "of_get_child_by_name(np, "usb") ?: of_get_child_by_name(np, "dwc3");"
pattern with using of_get_compatible_child() method in the Qcom DWC3 driver.
- Drop the patches:
[PATCH v6 01/10] arm: dts: ls1021a: Harmonize DWC USB3 DT nodes name
[PATCH v6 02/10] arm: dts: keystone: Correct DWC USB3 compatible string
[PATCH v6 06/10] arm: dts: keystone: Harmonize DWC USB3 DT nodes name
since they have been applied to the corresponding maintainers repos.
- Cleanup the list of recipients.
- Rebase onto kernel 5.12-rc4.
Link: https://lore.kernel.org/lkml/[email protected]
Changelog v8:
- Just resend.
Link: https://lore.kernel.org/lkml/[email protected]
Changelog v9:
- Drop the patches:
[PATCH RESEND v8 1/8] arm: dts: ls1021a: Harmonize DWC USB3 DT nodes name
[PATCH RESEND v8 7/8] usb: dwc3: qcom: Detect DWC3 DT-nodes using compatible string
since they have been applied to the corresponding maintainers repos.
- Rebase onto the kernel 5.19-rcX.
Link: https://lore.kernel.org/lkml/[email protected]
Changelog v10:
- Just resend.
- Rebase onto the kernel 6.8-rc3.
- Drop the already merged in patches:
[PATCH RESEND v9 1/5] arc: dts: Harmonize EHCI/OHCI DT nodes name
[PATCH RESEND v9 2/5] arm: dts: lpc18xx: Harmonize EHCI/OHCI DT nodes name
[PATCH RESEND v9 4/5] arm: dts: stih407-family: Harmonize DWC USB3 DT nodes name
[PATCH RESEND v9 5/5] arm64: dts: apm: Harmonize DWC USB3 DT nodes name
Cc: Krzysztof Kozlowski <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Serge Semin (1):
powerpc: dts: akebono: Harmonize EHCI/OHCI DT nodes name
arch/powerpc/boot/dts/akebono.dts | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--
2.43.0