Convert the Atmel flexcom device tree bindings to json schema.
Signed-off-by: Kavyasree Kotagiri <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Balakrishnan Sambath <[email protected]>
---
.../bindings/mfd/atmel,sama5d2-flexcom.yaml | 99 ++++++++++++++++++++++
.../devicetree/bindings/mfd/atmel-flexcom.txt | 64 --------------
2 files changed, 99 insertions(+), 64 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml b/Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml
new file mode 100644
index 000000000000..0dc6a40b63f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/atmel,sama5d2-flexcom.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Flexcom (Flexible Serial Communication Unit)
+
+maintainers:
+ - Kavyasree Kotagiri <[email protected]>
+
+description:
+ The Microchip Flexcom is just a wrapper which embeds a SPI controller,
+ an I2C controller and an USART. Only one function can be used at a
+ time and is chosen at boot time according to the device tree.
+
+properties:
+ compatible:
+ oneOf:
+ - const: atmel,sama5d2-flexcom
+ - items:
+ - const: microchip,sam9x7-flexcom
+ - const: atmel,sama5d2-flexcom
+ - items:
+ - const: microchip,sama7g5-flexcom
+ - const: atmel,sama5d2-flexcom
+
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ ranges:
+ description:
+ One range for the full I/O register region. (including USART,
+ TWI and SPI registers).
+ items:
+ maxItems: 3
+
+ atmel,flexcom-mode:
+ description: |
+ Specifies the flexcom mode as follows:
+ 1: USART
+ 2: SPI
+ 3: I2C.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 2, 3]
+
+patternProperties:
+ "^serial@[0-9a-f]+$":
+ type: object
+ description:
+ Child node describing USART. See atmel-usart.txt for details
+ of USART bindings.
+
+ "^spi@[0-9a-f]+$":
+ type: object
+ description:
+ Child node describing SPI. See ../spi/spi_atmel.txt for details
+ of SPI bindings.
+
+ "^i2c@[0-9a-f]+$":
+ $ref: /schemas/i2c/atmel,at91sam-i2c.yaml
+ description:
+ Child node describing I2C.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - "#address-cells"
+ - "#size-cells"
+ - ranges
+ - atmel,flexcom-mode
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ flx0: flexcom@f8034000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xf8034000 0x200>;
+ clocks = <&flx0_clk>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf8034000 0x800>;
+ atmel,flexcom-mode = <2>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
deleted file mode 100644
index af692e8833a5..000000000000
--- a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-* Device tree bindings for Atmel Flexcom (Flexible Serial Communication Unit)
-
-The Atmel Flexcom is just a wrapper which embeds a SPI controller, an I2C
-controller and an USART. Only one function can be used at a time and is chosen
-at boot time according to the device tree.
-
-Required properties:
-- compatible: Should be "atmel,sama5d2-flexcom"
- or "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"
-- reg: Should be the offset/length value for Flexcom dedicated
- I/O registers (without USART, TWI or SPI registers).
-- clocks: Should be the Flexcom peripheral clock from PMC.
-- #address-cells: Should be <1>
-- #size-cells: Should be <1>
-- ranges: Should be one range for the full I/O register region
- (including USART, TWI and SPI registers).
-- atmel,flexcom-mode: Should be one of the following values:
- - <1> for USART
- - <2> for SPI
- - <3> for I2C
-
-Required child:
-A single available child device of type matching the "atmel,flexcom-mode"
-property.
-
-The phandle provided by the clocks property of the child is the same as one for
-the Flexcom parent.
-
-For other properties, please refer to the documentations of the respective
-device:
-- ../serial/atmel-usart.txt
-- ../spi/spi_atmel.txt
-- ../i2c/i2c-at91.txt
-
-Example:
-
-flexcom@f8034000 {
- compatible = "atmel,sama5d2-flexcom";
- reg = <0xf8034000 0x200>;
- clocks = <&flx0_clk>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0xf8034000 0x800>;
- atmel,flexcom-mode = <2>;
-
- spi@400 {
- compatible = "atmel,at91rm9200-spi";
- reg = <0x400 0x200>;
- interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_flx0_default>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&flx0_clk>;
- clock-names = "spi_clk";
- atmel,fifo-size = <32>;
-
- flash@0 {
- compatible = "atmel,at25f512b";
- reg = <0>;
- spi-max-frequency = <20000000>;
- };
- };
-};
--
2.25.1
On Fri, 23 Feb 2024 14:46:23 +0530, Balakrishnan Sambath wrote:
> Convert the Atmel flexcom device tree bindings to json schema.
>
>
Applied, thanks!
[2/2] dt-bindings: mfd: Convert atmel-flexcom to json-schema
commit: fddc5d727e4503481db8dce243ad7355c40f45db
--
Lee Jones [李琼斯]