From: Yicong Yang <[email protected]>
We accidently met the issue that the bash prompt is not shown after the
previous command done and until the next input if there's only one CPU
(In our issue other CPUs are isolated by isolcpus=). Further analysis
shows it's because the port entering runtime suspend even if there's
still pending chars in the buffer and the pending chars will only be
processed in next device resuming. We are using amba-pl011 and the
problematic flow is like below:
Bash kworker
tty_write()
file_tty_write()
n_tty_write()
uart_write()
__uart_start()
pm_runtime_get() // wakeup waker
queue_work()
pm_runtime_work()
rpm_resume()
status = RPM_RESUMING
serial_port_runtime_resume()
port->ops->start_tx()
pl011_tx_chars()
uart_write_wakeup()
[…]
__uart_start()
pm_runtime_get() < 0 // because runtime status = RPM_RESUMING
// later data are not commit to the port driver
status = RPM_ACTIVE
rpm_idle() -> rpm_suspend()
This patch tries to fix this by checking the port busy before entering
runtime suspending. A runtime_suspend callback is added for the port
driver. When entering runtime suspend the callback is invoked, if there's
still pending chars in the buffer then flush the buffer.
Fixes: 84a9582fd203 ("serial: core: Start managing serial controllers to enable runtime PM")
Reviewed-by: Tony Lindgren <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Yicong Yang <[email protected]>
---
Change since v4:
- Address the code style per Andy and add his tag
Thanks.
Link: https://lore.kernel.org/all/[email protected]/
Change since v3:
- Drop non-fix change in __serial_port_busy()
- Use a boolen busy instead of ret per Jiri
Link: https://lore.kernel.org/all/[email protected]/
Change since v2:
- Narrow the spinlock region per Andy
- Make __serial_port_busy() return -EBUSY if port has pending chars per Andy
Thanks.
Link: https://lore.kernel.org/all/[email protected]/
Change since v1:
- Use port lock wrapper per John
- Flush the pending chars and return -EBUSY per Tony.
Thanks.
Link: https://lore.kernel.org/all/[email protected]/
drivers/tty/serial/serial_port.c | 25 ++++++++++++++++++++++++-
1 file changed, 24 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/serial_port.c b/drivers/tty/serial/serial_port.c
index 88975a4df306..72b6f4f326e2 100644
--- a/drivers/tty/serial/serial_port.c
+++ b/drivers/tty/serial/serial_port.c
@@ -46,8 +46,31 @@ static int serial_port_runtime_resume(struct device *dev)
return 0;
}
+static int serial_port_runtime_suspend(struct device *dev)
+{
+ struct serial_port_device *port_dev = to_serial_base_port_device(dev);
+ struct uart_port *port = port_dev->port;
+ unsigned long flags;
+ bool busy;
+
+ if (port->flags & UPF_DEAD)
+ return 0;
+
+ uart_port_lock_irqsave(port, &flags);
+ busy = __serial_port_busy(port);
+ if (busy)
+ port->ops->start_tx(port);
+ uart_port_unlock_irqrestore(port, flags);
+
+ if (busy)
+ pm_runtime_mark_last_busy(dev);
+
+ return busy ? -EBUSY : 0;
+}
+
static DEFINE_RUNTIME_DEV_PM_OPS(serial_port_pm,
- NULL, serial_port_runtime_resume, NULL);
+ serial_port_runtime_suspend,
+ serial_port_runtime_resume, NULL);
static int serial_port_probe(struct device *dev)
{
--
2.24.0