Adam Ford <[email protected]>
Sat, Feb 17, 10:16 PM (9 days ago)
to linux-arm-kernel, linux-phy, aford, me, Vinod, Kishon, Rob, Krzysztof, Conor, Shawn, Sascha, Pengutronix, Fabio, NXP, Catalin, Will, Lucas, devicetree, linux-kernel
The i.MX8M Plus has an HDMI controller, which depends on several
other systems. The Parallel Video Interface (PVI) and the
HDMI-TX are already in the Linux-Next staging area 20240209, but
the HDMI PHY driver and several device trees updates are still needed.
This series is adapted from multiple series from Lucas Stach with
edits and suggestions from feedback from various attemps, but it
since it's difficult to use and test them independently,
I merged them into on unified series. The version history is a
bit ambiguous since different components were submitted at different
times and had different amount of attempts.
The previous attempt I did used the wrong starting point for the PHY,
so this update includes a newer starting point with tags from that version
and fixes from various people's feedback. I hope I caught them all, but
I apologize if I missed something. Any tags from the previous attempt I
made were intentionally dropped, because of the significant change,
but I kept tags from the newer version I grabbed from patchwork.
Because several items from the last attempt were merged, this
series is only focussed on adding the HDMI PHY driver, and enabling
the power domain, irqsteer interrupt controller, and HDMI pipeline
in the device tree. The version numbers are a bit strange since
these all got pulled from various attempts with different versions,
but I wanted to push them together as a series to complete the pending
work.
This series restarted at V4 based on the version of the PHY driver and
the other drivers and power-domain changes have been applied already.
V6: Make the PHY driver depend on COMMON_CLK to fix build errors
Make LCDIF3 disabled by default since it depends on hardware.
V5 primarily updates feedback from the PHY driver itself, but a small
adjustment was made to the register size in the device tree.
Adam Ford (1):
arm64: defconfig: Enable DRM_IMX8MP_DW_HDMI_BRIDGE as module
Adam Ford (1):
arm64: defconfig: Enable DRM_IMX8MP_DW_HDMI_BRIDGE as module
Lucas Stach (5):
dt-bindings: phy: add binding for the i.MX8MP HDMI PHY
phy: freescale: add Samsung HDMI PHY
arm64: dts: imx8mp: add HDMI power-domains
arm64: dts: imx8mp: add HDMI irqsteer
arm64: dts: imx8mp: add HDMI display pipeline
.../bindings/phy/fsl,imx8mp-hdmi-phy.yaml | 62 ++
arch/arm64/boot/dts/freescale/imx8mp.dtsi | 146 ++++
arch/arm64/configs/defconfig | 1 +
drivers/phy/freescale/Kconfig | 6 +
drivers/phy/freescale/Makefile | 1 +
drivers/phy/freescale/phy-fsl-samsung-hdmi.c | 720 ++++++++++++++++++
6 files changed, 936 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/fsl,imx8mp-hdmi-phy.yaml
create mode 100644 drivers/phy/freescale/phy-fsl-samsung-hdmi.c
--
2.43.0
From: Lucas Stach <[email protected]>
This adds the driver for the Samsung HDMI PHY found on the
i.MX8MP SoC. Based on downstream implementation from
Sandor Yu <[email protected]>. According to the TRM, the PHY
receives parallel data from the link and serializes it. It
also sets the PLL clock needed for the TX serializer.
Tested-by: Luca Ceresoli <[email protected]> (v2)
Tested-by: Richard Leitner <[email protected]> (v2)
Co-developed-by: Marco Felsch <[email protected]>
Signed-off-by: Marco Felsch <[email protected]>
Signed-off-by: Lucas Stach <[email protected]>
Tested-by: Alexander Stein <[email protected]>
Tested-by: Frieder Schrempf <[email protected]> # Kontron BL
Signed-off-by: Adam Ford <[email protected]>
Tested-by: Marek Vasut <[email protected]>
Tested-by: Luca Ceresoli <[email protected]>
---
V6: Set Kconfig dependency to include COMMON_CLK due to build
errors
V5: Remove an unnecessary include
Migrate from of_clk_add_provider to of_clk_add_hw_provider
Make const structures static
Fix uninitialized variables and prevent div by 0
Mark PM functions as __maybe_unused
V4:
- I (Adam) added a comment in the code for clarifcation
based on questions from Luca concerning a difference
between the code and the ref manual.
- Fixed the GENMASK on REG14
- Expanded the commit message briefly describing
a bit more of what this driver does.
- Removed some unnecessary include files.
v3:
- use GENMASK/FIELD_PREP
- lowercase hex values
- correct coding style
v2:
- use DEFINE_RUNTIME_DEV_PM_OPS
---
drivers/phy/freescale/Kconfig | 6 +
drivers/phy/freescale/Makefile | 1 +
drivers/phy/freescale/phy-fsl-samsung-hdmi.c | 720 +++++++++++++++++++
3 files changed, 727 insertions(+)
create mode 100644 drivers/phy/freescale/phy-fsl-samsung-hdmi.c
diff --git a/drivers/phy/freescale/Kconfig b/drivers/phy/freescale/Kconfig
index 853958fb2c06..45aaaea14fb4 100644
--- a/drivers/phy/freescale/Kconfig
+++ b/drivers/phy/freescale/Kconfig
@@ -35,6 +35,12 @@ config PHY_FSL_IMX8M_PCIE
Enable this to add support for the PCIE PHY as found on
i.MX8M family of SOCs.
+config PHY_FSL_SAMSUNG_HDMI_PHY
+ tristate "Samsung HDMI PHY support"
+ depends on OF && HAS_IOMEM && COMMON_CLK
+ help
+ Enable this to add support for the Samsung HDMI PHY in i.MX8MP.
+
endif
config PHY_FSL_LYNX_28G
diff --git a/drivers/phy/freescale/Makefile b/drivers/phy/freescale/Makefile
index cedb328bc4d2..c4386bfdb853 100644
--- a/drivers/phy/freescale/Makefile
+++ b/drivers/phy/freescale/Makefile
@@ -4,3 +4,4 @@ obj-$(CONFIG_PHY_MIXEL_LVDS_PHY) += phy-fsl-imx8qm-lvds-phy.o
obj-$(CONFIG_PHY_MIXEL_MIPI_DPHY) += phy-fsl-imx8-mipi-dphy.o
obj-$(CONFIG_PHY_FSL_IMX8M_PCIE) += phy-fsl-imx8m-pcie.o
obj-$(CONFIG_PHY_FSL_LYNX_28G) += phy-fsl-lynx-28g.o
+obj-$(CONFIG_PHY_FSL_SAMSUNG_HDMI_PHY) += phy-fsl-samsung-hdmi.o
diff --git a/drivers/phy/freescale/phy-fsl-samsung-hdmi.c b/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
new file mode 100644
index 000000000000..89e2c01f2ccf
--- /dev/null
+++ b/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
@@ -0,0 +1,720 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 NXP
+ * Copyright 2022 Pengutronix, Lucas Stach <[email protected]>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+#define PHY_REG_00 0x00
+#define PHY_REG_01 0x04
+#define PHY_REG_02 0x08
+#define PHY_REG_08 0x20
+#define PHY_REG_09 0x24
+#define PHY_REG_10 0x28
+#define PHY_REG_11 0x2c
+
+#define PHY_REG_12 0x30
+#define REG12_CK_DIV_MASK GENMASK(5, 4)
+
+#define PHY_REG_13 0x34
+#define REG13_TG_CODE_LOW_MASK GENMASK(7, 0)
+
+#define PHY_REG_14 0x38
+#define REG14_TOL_MASK GENMASK(7, 4)
+#define REG14_RP_CODE_MASK GENMASK(3, 1)
+#define REG14_TG_CODE_HIGH_MASK GENMASK(0, 0)
+
+#define PHY_REG_15 0x3c
+#define PHY_REG_16 0x40
+#define PHY_REG_17 0x44
+#define PHY_REG_18 0x48
+#define PHY_REG_19 0x4c
+#define PHY_REG_20 0x50
+
+#define PHY_REG_21 0x54
+#define REG21_SEL_TX_CK_INV BIT(7)
+#define REG21_PMS_S_MASK GENMASK(3, 0)
+
+#define PHY_REG_22 0x58
+#define PHY_REG_23 0x5c
+#define PHY_REG_24 0x60
+#define PHY_REG_25 0x64
+#define PHY_REG_26 0x68
+#define PHY_REG_27 0x6c
+#define PHY_REG_28 0x70
+#define PHY_REG_29 0x74
+#define PHY_REG_30 0x78
+#define PHY_REG_31 0x7c
+#define PHY_REG_32 0x80
+
+/*
+ * REG33 does not match the ref manual. According to Sandor Yu from NXP,
+ * "There is a doc issue on the i.MX8MP latest RM"
+ * REG33 is being used per guidance from Sandor
+ */
+
+#define PHY_REG_33 0x84
+#define REG33_MODE_SET_DONE BIT(7)
+#define REG33_FIX_DA BIT(1)
+
+#define PHY_REG_34 0x88
+#define REG34_PHY_READY BIT(7)
+#define REG34_PLL_LOCK BIT(6)
+#define REG34_PHY_CLK_READY BIT(5)
+
+#define PHY_REG_35 0x8c
+#define PHY_REG_36 0x90
+#define PHY_REG_37 0x94
+#define PHY_REG_38 0x98
+#define PHY_REG_39 0x9c
+#define PHY_REG_40 0xa0
+#define PHY_REG_41 0xa4
+#define PHY_REG_42 0xa8
+#define PHY_REG_43 0xac
+#define PHY_REG_44 0xb0
+#define PHY_REG_45 0xb4
+#define PHY_REG_46 0xb8
+#define PHY_REG_47 0xbc
+
+#define PHY_PLL_DIV_REGS_NUM 6
+
+struct phy_config {
+ u32 pixclk;
+ u8 pll_div_regs[PHY_PLL_DIV_REGS_NUM];
+};
+
+static const struct phy_config phy_pll_cfg[] = {
+ {
+ .pixclk = 22250000,
+ .pll_div_regs = { 0x4b, 0xf1, 0x89, 0x88, 0x80, 0x40 },
+ }, {
+ .pixclk = 23750000,
+ .pll_div_regs = { 0x50, 0xf1, 0x86, 0x85, 0x80, 0x40 },
+ }, {
+ .pixclk = 24000000,
+ .pll_div_regs = { 0x50, 0xf0, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 24024000,
+ .pll_div_regs = { 0x50, 0xf1, 0x99, 0x02, 0x80, 0x40 },
+ }, {
+ .pixclk = 25175000,
+ .pll_div_regs = { 0x54, 0xfc, 0xcc, 0x91, 0x80, 0x40 },
+ }, {
+ .pixclk = 25200000,
+ .pll_div_regs = { 0x54, 0xf0, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 26750000,
+ .pll_div_regs = { 0x5a, 0xf2, 0x89, 0x88, 0x80, 0x40 },
+ }, {
+ .pixclk = 27000000,
+ .pll_div_regs = { 0x5a, 0xf0, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 27027000,
+ .pll_div_regs = { 0x5a, 0xf2, 0xfd, 0x0c, 0x80, 0x40 },
+ }, {
+ .pixclk = 29500000,
+ .pll_div_regs = { 0x62, 0xf4, 0x95, 0x08, 0x80, 0x40 },
+ }, {
+ .pixclk = 30750000,
+ .pll_div_regs = { 0x66, 0xf4, 0x82, 0x01, 0x88, 0x45 },
+ }, {
+ .pixclk = 30888000,
+ .pll_div_regs = { 0x66, 0xf4, 0x99, 0x18, 0x88, 0x45 },
+ }, {
+ .pixclk = 33750000,
+ .pll_div_regs = { 0x70, 0xf4, 0x82, 0x01, 0x80, 0x40 },
+ }, {
+ .pixclk = 35000000,
+ .pll_div_regs = { 0x58, 0xb8, 0x8b, 0x88, 0x80, 0x40 },
+ }, {
+ .pixclk = 36000000,
+ .pll_div_regs = { 0x5a, 0xb0, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 36036000,
+ .pll_div_regs = { 0x5a, 0xb2, 0xfd, 0x0c, 0x80, 0x40 },
+ }, {
+ .pixclk = 40000000,
+ .pll_div_regs = { 0x64, 0xb0, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 43200000,
+ .pll_div_regs = { 0x5a, 0x90, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 43243200,
+ .pll_div_regs = { 0x5a, 0x92, 0xfd, 0x0c, 0x80, 0x40 },
+ }, {
+ .pixclk = 44500000,
+ .pll_div_regs = { 0x5c, 0x92, 0x98, 0x11, 0x84, 0x41 },
+ }, {
+ .pixclk = 47000000,
+ .pll_div_regs = { 0x62, 0x94, 0x95, 0x82, 0x80, 0x40 },
+ }, {
+ .pixclk = 47500000,
+ .pll_div_regs = { 0x63, 0x96, 0xa1, 0x82, 0x80, 0x40 },
+ }, {
+ .pixclk = 50349650,
+ .pll_div_regs = { 0x54, 0x7c, 0xc3, 0x8f, 0x80, 0x40 },
+ }, {
+ .pixclk = 50400000,
+ .pll_div_regs = { 0x54, 0x70, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 53250000,
+ .pll_div_regs = { 0x58, 0x72, 0x84, 0x03, 0x82, 0x41 },
+ }, {
+ .pixclk = 53500000,
+ .pll_div_regs = { 0x5a, 0x72, 0x89, 0x88, 0x80, 0x40 },
+ }, {
+ .pixclk = 54000000,
+ .pll_div_regs = { 0x5a, 0x70, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 54054000,
+ .pll_div_regs = { 0x5a, 0x72, 0xfd, 0x0c, 0x80, 0x40 },
+ }, {
+ .pixclk = 59000000,
+ .pll_div_regs = { 0x62, 0x74, 0x95, 0x08, 0x80, 0x40 },
+ }, {
+ .pixclk = 59340659,
+ .pll_div_regs = { 0x62, 0x74, 0xdb, 0x52, 0x88, 0x47 },
+ }, {
+ .pixclk = 59400000,
+ .pll_div_regs = { 0x63, 0x70, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 61500000,
+ .pll_div_regs = { 0x66, 0x74, 0x82, 0x01, 0x88, 0x45 },
+ }, {
+ .pixclk = 63500000,
+ .pll_div_regs = { 0x69, 0x74, 0x89, 0x08, 0x80, 0x40 },
+ }, {
+ .pixclk = 67500000,
+ .pll_div_regs = { 0x54, 0x52, 0x87, 0x03, 0x80, 0x40 },
+ }, {
+ .pixclk = 70000000,
+ .pll_div_regs = { 0x58, 0x58, 0x8b, 0x88, 0x80, 0x40 },
+ }, {
+ .pixclk = 72000000,
+ .pll_div_regs = { 0x5a, 0x50, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 72072000,
+ .pll_div_regs = { 0x5a, 0x52, 0xfd, 0x0c, 0x80, 0x40 },
+ }, {
+ .pixclk = 74176000,
+ .pll_div_regs = { 0x5d, 0x58, 0xdb, 0xA2, 0x88, 0x41 },
+ }, {
+ .pixclk = 74250000,
+ .pll_div_regs = { 0x5c, 0x52, 0x90, 0x0d, 0x84, 0x41 },
+ }, {
+ .pixclk = 78500000,
+ .pll_div_regs = { 0x62, 0x54, 0x87, 0x01, 0x80, 0x40 },
+ }, {
+ .pixclk = 80000000,
+ .pll_div_regs = { 0x64, 0x50, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 82000000,
+ .pll_div_regs = { 0x66, 0x54, 0x82, 0x01, 0x88, 0x45 },
+ }, {
+ .pixclk = 82500000,
+ .pll_div_regs = { 0x67, 0x54, 0x88, 0x01, 0x90, 0x49 },
+ }, {
+ .pixclk = 89000000,
+ .pll_div_regs = { 0x70, 0x54, 0x84, 0x83, 0x80, 0x40 },
+ }, {
+ .pixclk = 90000000,
+ .pll_div_regs = { 0x70, 0x54, 0x82, 0x01, 0x80, 0x40 },
+ }, {
+ .pixclk = 94000000,
+ .pll_div_regs = { 0x4e, 0x32, 0xa7, 0x10, 0x80, 0x40 },
+ }, {
+ .pixclk = 95000000,
+ .pll_div_regs = { 0x50, 0x31, 0x86, 0x85, 0x80, 0x40 },
+ }, {
+ .pixclk = 98901099,
+ .pll_div_regs = { 0x52, 0x3a, 0xdb, 0x4c, 0x88, 0x47 },
+ }, {
+ .pixclk = 99000000,
+ .pll_div_regs = { 0x52, 0x32, 0x82, 0x01, 0x88, 0x47 },
+ }, {
+ .pixclk = 100699300,
+ .pll_div_regs = { 0x54, 0x3c, 0xc3, 0x8f, 0x80, 0x40 },
+ }, {
+ .pixclk = 100800000,
+ .pll_div_regs = { 0x54, 0x30, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 102500000,
+ .pll_div_regs = { 0x55, 0x32, 0x8c, 0x05, 0x90, 0x4b },
+ }, {
+ .pixclk = 104750000,
+ .pll_div_regs = { 0x57, 0x32, 0x98, 0x07, 0x90, 0x49 },
+ }, {
+ .pixclk = 106500000,
+ .pll_div_regs = { 0x58, 0x32, 0x84, 0x03, 0x82, 0x41 },
+ }, {
+ .pixclk = 107000000,
+ .pll_div_regs = { 0x5a, 0x32, 0x89, 0x88, 0x80, 0x40 },
+ }, {
+ .pixclk = 108000000,
+ .pll_div_regs = { 0x5a, 0x30, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 108108000,
+ .pll_div_regs = { 0x5a, 0x32, 0xfd, 0x0c, 0x80, 0x40 },
+ }, {
+ .pixclk = 118000000,
+ .pll_div_regs = { 0x62, 0x34, 0x95, 0x08, 0x80, 0x40 },
+ }, {
+ .pixclk = 118800000,
+ .pll_div_regs = { 0x63, 0x30, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 123000000,
+ .pll_div_regs = { 0x66, 0x34, 0x82, 0x01, 0x88, 0x45 },
+ }, {
+ .pixclk = 127000000,
+ .pll_div_regs = { 0x69, 0x34, 0x89, 0x08, 0x80, 0x40 },
+ }, {
+ .pixclk = 135000000,
+ .pll_div_regs = { 0x70, 0x34, 0x82, 0x01, 0x80, 0x40 },
+ }, {
+ .pixclk = 135580000,
+ .pll_div_regs = { 0x71, 0x39, 0xe9, 0x82, 0x9c, 0x5b },
+ }, {
+ .pixclk = 137520000,
+ .pll_div_regs = { 0x72, 0x38, 0x99, 0x10, 0x85, 0x41 },
+ }, {
+ .pixclk = 138750000,
+ .pll_div_regs = { 0x73, 0x35, 0x88, 0x05, 0x90, 0x4d },
+ }, {
+ .pixclk = 140000000,
+ .pll_div_regs = { 0x75, 0x36, 0xa7, 0x90, 0x80, 0x40 },
+ }, {
+ .pixclk = 144000000,
+ .pll_div_regs = { 0x78, 0x30, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 148352000,
+ .pll_div_regs = { 0x7b, 0x35, 0xdb, 0x39, 0x90, 0x45 },
+ }, {
+ .pixclk = 148500000,
+ .pll_div_regs = { 0x7b, 0x35, 0x84, 0x03, 0x90, 0x45 },
+ }, {
+ .pixclk = 154000000,
+ .pll_div_regs = { 0x40, 0x18, 0x83, 0x01, 0x00, 0x40 },
+ }, {
+ .pixclk = 157000000,
+ .pll_div_regs = { 0x41, 0x11, 0xa7, 0x14, 0x80, 0x40 },
+ }, {
+ .pixclk = 160000000,
+ .pll_div_regs = { 0x42, 0x12, 0xa1, 0x20, 0x80, 0x40 },
+ }, {
+ .pixclk = 162000000,
+ .pll_div_regs = { 0x43, 0x18, 0x8b, 0x08, 0x96, 0x55 },
+ }, {
+ .pixclk = 164000000,
+ .pll_div_regs = { 0x45, 0x11, 0x83, 0x82, 0x90, 0x4b },
+ }, {
+ .pixclk = 165000000,
+ .pll_div_regs = { 0x45, 0x11, 0x84, 0x81, 0x90, 0x4b },
+ }, {
+ .pixclk = 180000000,
+ .pll_div_regs = { 0x4b, 0x10, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 185625000,
+ .pll_div_regs = { 0x4e, 0x12, 0x9a, 0x95, 0x80, 0x40 },
+ }, {
+ .pixclk = 188000000,
+ .pll_div_regs = { 0x4e, 0x12, 0xa7, 0x10, 0x80, 0x40 },
+ }, {
+ .pixclk = 198000000,
+ .pll_div_regs = { 0x52, 0x12, 0x82, 0x01, 0x88, 0x47 },
+ }, {
+ .pixclk = 205000000,
+ .pll_div_regs = { 0x55, 0x12, 0x8c, 0x05, 0x90, 0x4b },
+ }, {
+ .pixclk = 209500000,
+ .pll_div_regs = { 0x57, 0x12, 0x98, 0x07, 0x90, 0x49 },
+ }, {
+ .pixclk = 213000000,
+ .pll_div_regs = { 0x58, 0x12, 0x84, 0x03, 0x82, 0x41 },
+ }, {
+ .pixclk = 216000000,
+ .pll_div_regs = { 0x5a, 0x10, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 216216000,
+ .pll_div_regs = { 0x5a, 0x12, 0xfd, 0x0c, 0x80, 0x40 },
+ }, {
+ .pixclk = 237600000,
+ .pll_div_regs = { 0x63, 0x10, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 254000000,
+ .pll_div_regs = { 0x69, 0x14, 0x89, 0x08, 0x80, 0x40 },
+ }, {
+ .pixclk = 277500000,
+ .pll_div_regs = { 0x73, 0x15, 0x88, 0x05, 0x90, 0x4d },
+ }, {
+ .pixclk = 288000000,
+ .pll_div_regs = { 0x78, 0x10, 0x00, 0x00, 0x80, 0x00 },
+ }, {
+ .pixclk = 297000000,
+ .pll_div_regs = { 0x7b, 0x15, 0x84, 0x03, 0x90, 0x45 },
+ },
+};
+
+struct reg_settings {
+ u8 reg;
+ u8 val;
+};
+
+static const struct reg_settings common_phy_cfg[] = {
+ { PHY_REG_00, 0x00 }, { PHY_REG_01, 0xd1 },
+ { PHY_REG_08, 0x4f }, { PHY_REG_09, 0x30 },
+ { PHY_REG_10, 0x33 }, { PHY_REG_11, 0x65 },
+ /* REG12 pixclk specific */
+ /* REG13 pixclk specific */
+ /* REG14 pixclk specific */
+ { PHY_REG_15, 0x80 }, { PHY_REG_16, 0x6c },
+ { PHY_REG_17, 0xf2 }, { PHY_REG_18, 0x67 },
+ { PHY_REG_19, 0x00 }, { PHY_REG_20, 0x10 },
+ /* REG21 pixclk specific */
+ { PHY_REG_22, 0x30 }, { PHY_REG_23, 0x32 },
+ { PHY_REG_24, 0x60 }, { PHY_REG_25, 0x8f },
+ { PHY_REG_26, 0x00 }, { PHY_REG_27, 0x00 },
+ { PHY_REG_28, 0x08 }, { PHY_REG_29, 0x00 },
+ { PHY_REG_30, 0x00 }, { PHY_REG_31, 0x00 },
+ { PHY_REG_32, 0x00 }, { PHY_REG_33, 0x80 },
+ { PHY_REG_34, 0x00 }, { PHY_REG_35, 0x00 },
+ { PHY_REG_36, 0x00 }, { PHY_REG_37, 0x00 },
+ { PHY_REG_38, 0x00 }, { PHY_REG_39, 0x00 },
+ { PHY_REG_40, 0x00 }, { PHY_REG_41, 0xe0 },
+ { PHY_REG_42, 0x83 }, { PHY_REG_43, 0x0f },
+ { PHY_REG_44, 0x3E }, { PHY_REG_45, 0xf8 },
+ { PHY_REG_46, 0x00 }, { PHY_REG_47, 0x00 }
+};
+
+struct fsl_samsung_hdmi_phy {
+ struct device *dev;
+ void __iomem *regs;
+ struct clk *apbclk;
+ struct clk *refclk;
+
+ /* clk provider */
+ struct clk_hw hw;
+ const struct phy_config *cur_cfg;
+};
+
+static inline struct fsl_samsung_hdmi_phy *
+to_fsl_samsung_hdmi_phy(struct clk_hw *hw)
+{
+ return container_of(hw, struct fsl_samsung_hdmi_phy, hw);
+}
+
+static void
+fsl_samsung_hdmi_phy_configure_pixclk(struct fsl_samsung_hdmi_phy *phy,
+ const struct phy_config *cfg)
+{
+ u8 div = 0x1;
+
+ switch (cfg->pixclk) {
+ case 22250000 ... 33750000:
+ div = 0xf;
+ break;
+ case 35000000 ... 40000000:
+ div = 0xb;
+ break;
+ case 43200000 ... 47500000:
+ div = 0x9;
+ break;
+ case 50349650 ... 63500000:
+ div = 0x7;
+ break;
+ case 67500000 ... 90000000:
+ div = 0x5;
+ break;
+ case 94000000 ... 148500000:
+ div = 0x3;
+ break;
+ case 154000000 ... 297000000:
+ div = 0x1;
+ break;
+ }
+
+ writeb(REG21_SEL_TX_CK_INV | FIELD_PREP(REG21_PMS_S_MASK, div),
+ phy->regs + PHY_REG_21);
+}
+
+static void
+fsl_samsung_hdmi_phy_configure_pll_lock_det(struct fsl_samsung_hdmi_phy *phy,
+ const struct phy_config *cfg)
+{
+ u32 pclk = cfg->pixclk;
+ u32 fld_tg_code;
+ u32 pclk_khz;
+ u8 div = 1;
+
+ switch (cfg->pixclk) {
+ case 22250000 ... 47500000:
+ div = 1;
+ break;
+ case 50349650 ... 99000000:
+ div = 2;
+ break;
+ case 100699300 ... 198000000:
+ div = 4;
+ break;
+ case 205000000 ... 297000000:
+ div = 8;
+ break;
+ }
+
+ writeb(FIELD_PREP(REG12_CK_DIV_MASK, ilog2(div)), phy->regs + PHY_REG_12);
+
+ /*
+ * Calculation for the frequency lock detector target code (fld_tg_code)
+ * is based on reference manual register description of PHY_REG13
+ * (13.10.3.1.14.2):
+ * 1st) Calculate int_pllclk which is determinded by FLD_CK_DIV
+ * 2nd) Increase resolution to avoid rounding issues
+ * 3th) Do the div (256 / Freq. of int_pllclk) * 24
+ * 4th) Reduce the resolution and always round up since the NXP
+ * settings rounding up always too. TODO: Check if that is
+ * correct.
+ */
+ pclk /= div;
+ pclk_khz = pclk / 1000;
+ fld_tg_code = 256 * 1000 * 1000 / pclk_khz * 24;
+ fld_tg_code = DIV_ROUND_UP(fld_tg_code, 1000);
+
+ /* FLD_TOL and FLD_RP_CODE taken from downstream driver */
+ writeb(FIELD_PREP(REG13_TG_CODE_LOW_MASK, fld_tg_code),
+ phy->regs + PHY_REG_13);
+ writeb(FIELD_PREP(REG14_TOL_MASK, 2) |
+ FIELD_PREP(REG14_RP_CODE_MASK, 2) |
+ FIELD_PREP(REG14_TG_CODE_HIGH_MASK, fld_tg_code >> 8),
+ phy->regs + PHY_REG_14);
+}
+
+static int fsl_samsung_hdmi_phy_configure(struct fsl_samsung_hdmi_phy *phy,
+ const struct phy_config *cfg)
+{
+ int i, ret;
+ u8 val;
+
+ /* HDMI PHY init */
+ writeb(REG33_FIX_DA, phy->regs + PHY_REG_33);
+
+ /* common PHY registers */
+ for (i = 0; i < ARRAY_SIZE(common_phy_cfg); i++)
+ writeb(common_phy_cfg[i].val, phy->regs + common_phy_cfg[i].reg);
+
+ /* set individual PLL registers PHY_REG2 ... PHY_REG7 */
+ for (i = 0; i < PHY_PLL_DIV_REGS_NUM; i++)
+ writeb(cfg->pll_div_regs[i], phy->regs + PHY_REG_02 + i * 4);
+
+ fsl_samsung_hdmi_phy_configure_pixclk(phy, cfg);
+ fsl_samsung_hdmi_phy_configure_pll_lock_det(phy, cfg);
+
+ writeb(REG33_FIX_DA | REG33_MODE_SET_DONE, phy->regs + PHY_REG_33);
+
+ ret = readb_poll_timeout(phy->regs + PHY_REG_34, val,
+ val & REG34_PLL_LOCK, 50, 20000);
+ if (ret)
+ dev_err(phy->dev, "PLL failed to lock\n");
+
+ return ret;
+}
+
+static unsigned long phy_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct fsl_samsung_hdmi_phy *phy = to_fsl_samsung_hdmi_phy(hw);
+
+ if (!phy->cur_cfg)
+ return 74250000;
+
+ return phy->cur_cfg->pixclk;
+}
+
+static long phy_clk_round_rate(struct clk_hw *hw,
+ unsigned long rate, unsigned long *parent_rate)
+{
+ int i;
+
+ for (i = ARRAY_SIZE(phy_pll_cfg) - 1; i >= 0; i--)
+ if (phy_pll_cfg[i].pixclk <= rate)
+ return phy_pll_cfg[i].pixclk;
+
+ return -EINVAL;
+}
+
+static int phy_clk_set_rate(struct clk_hw *hw,
+ unsigned long rate, unsigned long parent_rate)
+{
+ struct fsl_samsung_hdmi_phy *phy = to_fsl_samsung_hdmi_phy(hw);
+ int i;
+
+ for (i = ARRAY_SIZE(phy_pll_cfg) - 1; i >= 0; i--)
+ if (phy_pll_cfg[i].pixclk <= rate)
+ break;
+
+ if (i < 0)
+ return -EINVAL;
+
+ phy->cur_cfg = &phy_pll_cfg[i];
+
+ return fsl_samsung_hdmi_phy_configure(phy, phy->cur_cfg);
+}
+
+static const struct clk_ops phy_clk_ops = {
+ .recalc_rate = phy_clk_recalc_rate,
+ .round_rate = phy_clk_round_rate,
+ .set_rate = phy_clk_set_rate,
+};
+
+static int phy_clk_register(struct fsl_samsung_hdmi_phy *phy)
+{
+ struct device *dev = phy->dev;
+ struct device_node *np = dev->of_node;
+ struct clk_init_data init;
+ const char *parent_name;
+ struct clk *phyclk;
+ int ret;
+
+ parent_name = __clk_get_name(phy->refclk);
+
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+ init.flags = 0;
+ init.name = "hdmi_pclk";
+ init.ops = &phy_clk_ops;
+
+ phy->hw.init = &init;
+
+ phyclk = devm_clk_register(dev, &phy->hw);
+ if (IS_ERR(phyclk))
+ return dev_err_probe(dev, PTR_ERR(phyclk),
+ "failed to register clock\n");
+
+ ret = of_clk_add_hw_provider(np, of_clk_hw_simple_get, phyclk);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "failed to register clock provider\n");
+
+ return 0;
+}
+
+static int fsl_samsung_hdmi_phy_probe(struct platform_device *pdev)
+{
+ struct fsl_samsung_hdmi_phy *phy;
+ int ret;
+
+ phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
+ if (!phy)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, phy);
+ phy->dev = &pdev->dev;
+
+ phy->regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(phy->regs))
+ return PTR_ERR(phy->regs);
+
+ phy->apbclk = devm_clk_get(phy->dev, "apb");
+ if (IS_ERR(phy->apbclk))
+ return dev_err_probe(phy->dev, PTR_ERR(phy->apbclk),
+ "failed to get apb clk\n");
+
+ phy->refclk = devm_clk_get(phy->dev, "ref");
+ if (IS_ERR(phy->refclk))
+ return dev_err_probe(phy->dev, PTR_ERR(phy->refclk),
+ "failed to get ref clk\n");
+
+ ret = clk_prepare_enable(phy->apbclk);
+ if (ret) {
+ dev_err(phy->dev, "failed to enable apbclk\n");
+ return ret;
+ }
+
+ pm_runtime_get_noresume(phy->dev);
+ pm_runtime_set_active(phy->dev);
+ pm_runtime_enable(phy->dev);
+
+ ret = phy_clk_register(phy);
+ if (ret) {
+ dev_err(&pdev->dev, "register clk failed\n");
+ goto register_clk_failed;
+ }
+
+ pm_runtime_put(phy->dev);
+
+ return 0;
+
+register_clk_failed:
+ clk_disable_unprepare(phy->apbclk);
+
+ return ret;
+}
+
+static int fsl_samsung_hdmi_phy_remove(struct platform_device *pdev)
+{
+ of_clk_del_provider(pdev->dev.of_node);
+
+ return 0;
+}
+
+static int __maybe_unused fsl_samsung_hdmi_phy_suspend(struct device *dev)
+{
+ struct fsl_samsung_hdmi_phy *phy = dev_get_drvdata(dev);
+
+ clk_disable_unprepare(phy->apbclk);
+
+ return 0;
+}
+
+static int __maybe_unused fsl_samsung_hdmi_phy_resume(struct device *dev)
+{
+ struct fsl_samsung_hdmi_phy *phy = dev_get_drvdata(dev);
+ int ret = 0;
+
+ ret = clk_prepare_enable(phy->apbclk);
+ if (ret) {
+ dev_err(phy->dev, "failed to enable apbclk\n");
+ return ret;
+ }
+
+ if (phy->cur_cfg)
+ ret = fsl_samsung_hdmi_phy_configure(phy, phy->cur_cfg);
+
+ return ret;
+
+}
+
+static DEFINE_RUNTIME_DEV_PM_OPS(fsl_samsung_hdmi_phy_pm_ops,
+ fsl_samsung_hdmi_phy_suspend,
+ fsl_samsung_hdmi_phy_resume, NULL);
+
+static const struct of_device_id fsl_samsung_hdmi_phy_of_match[] = {
+ {
+ .compatible = "fsl,imx8mp-hdmi-phy",
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(of, fsl_samsung_hdmi_phy_of_match);
+
+static struct platform_driver fsl_samsung_hdmi_phy_driver = {
+ .probe = fsl_samsung_hdmi_phy_probe,
+ .remove = fsl_samsung_hdmi_phy_remove,
+ .driver = {
+ .name = "fsl-samsung-hdmi-phy",
+ .of_match_table = fsl_samsung_hdmi_phy_of_match,
+ .pm = pm_ptr(&fsl_samsung_hdmi_phy_pm_ops),
+ },
+};
+module_platform_driver(fsl_samsung_hdmi_phy_driver);
+
+MODULE_AUTHOR("Sandor Yu <[email protected]>");
+MODULE_DESCRIPTION("SAMSUNG HDMI 2.0 Transmitter PHY Driver");
+MODULE_LICENSE("GPL");
--
2.43.0
The i.MX8M Plus has support for an HDMI transmitter. The
video is genereated by lcdif3, routed to the hdmi parallel
video interface, then fed to a DW HDMI bridge to support
up to 4K video output.
Signed-off-by: Adam Ford <[email protected]>
Reviewed-by: Luca Ceresoli <[email protected]>
Tested-by: Luca Ceresoli <[email protected]>
---
V6: No Change
V5: Added Review and tested-by from Luca
No functional change since V1
---
arch/arm64/configs/defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 34681284043f..ee644d27652b 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -887,6 +887,7 @@ CONFIG_DRM_ANALOGIX_ANX7625=m
CONFIG_DRM_I2C_ADV7511=m
CONFIG_DRM_I2C_ADV7511_AUDIO=y
CONFIG_DRM_CDNS_MHDP8546=m
+CONFIG_DRM_IMX8MP_DW_HDMI_BRIDGE=m
CONFIG_DRM_DW_HDMI_AHB_AUDIO=m
CONFIG_DRM_DW_HDMI_CEC=m
CONFIG_DRM_IMX_DCSS=m
--
2.43.0