From: ZhangPeng <[email protected]>
The major fault occurred when using mlockall(MCL_CURRENT | MCL_FUTURE)
in application, which leading to an unexpected issue[1].
This caused by temporarily cleared PTE during a read+clear/modify/write
update of the PTE, eg, do_numa_page()/change_pte_range().
For the data segment of the user-mode program, the global variable area
is a private mapping. After the pagecache is loaded, the private anonymous
page is generated after the COW is triggered. Mlockall can lock COW pages
(anonymous pages), but the original file pages cannot be locked and may
be reclaimed. If the global variable (private anon page) is accessed when
vmf->pte is zeroed in numa fault, a file page fault will be triggered.
At this time, the original private file page may have been reclaimed.
If the page cache is not available at this time, a major fault will be
triggered and the file will be read, causing additional overhead.
This issue affects our traffic analysis service. The inbound traffic is
heavy. If a major fault occurs, the I/O schedule is triggered and the
original I/O is suspended. Generally, the I/O schedule is 0.7 ms. If
other applications are operating disks, the system needs to wait for
more than 10 ms. However, the inbound traffic is heavy and the NIC buffer
is small. As a result, packet loss occurs. But the traffic analysis service
can't tolerate packet loss.
Fix this by holding PTL and rechecking the PTE in filemap_fault() before
triggering a major fault. We do this check only if vma is VM_LOCKED. In
our service test environment, the baseline is 7 major faults / 12 hours.
After the patch is applied, no major fault will be triggered.
Testing file anonymous page read and write page fault performance in
ext4, tmpfs and ramdisk using will-it-scale[2] on a x86 physical machine.
The data is the average change compared with the mainline after the patch
is applied. The test results are indicates some performance regressions.
We do this check only if vma is VM_LOCKED, therefore, no performance
regressions is caused for most common cases.
The test results are as follows:
processes processes_idle threads threads_idle
ext4 private file write: -0.51% 0.08% -0.03% -0.04%
ext4 shared file write: 0.135% -0.531% 2.883% -0.772%
ramdisk private file write: -0.48% 0.23% -1.08% 0.27%
ramdisk private file read: 0.07% -6.90% -5.85% -0.70%
tmpfs private file write: -0.344% -0.110% 0.200% 0.145%
tmpfs shared file write: 0.958% 0.101% 2.781% -0.337%
tmpfs private file read: -0.16% 0.00% -0.12% 0.41%
[1] https://lore.kernel.org/linux-mm/[email protected]/
[2] https://github.com/antonblanchard/will-it-scale/
Suggested-by: "Huang, Ying" <[email protected]>
Suggested-by: David Hildenbrand <[email protected]>
Signed-off-by: ZhangPeng <[email protected]>
Signed-off-by: Kefeng Wang <[email protected]>
---
v2->v3:
- Do this check only if vma is VM_LOCKED per David Hildenbrand
- Hold PTL and recheck the PTE
- Place the recheck code in a new function filemap_fault_recheck_pte()
v1->v2:
- Add more test results per Huang, Ying
- Add more comments before check PTE per Huang, Ying, David Hildenbrand
and Yin Fengwei
- Change pte_offset_map_nolock to pte_offset_map as the PTL won't
be used
RFC->v1:
- Add error handling when ptep == NULL per Huang, Ying and Matthew
Wilcox
- Check the PTE without acquiring PTL in filemap_fault(), suggested by
Huang, Ying and Yin Fengwei
- Add pmd_none() check before PTE map
- Update commit message and add performance test information
mm/filemap.c | 40 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/mm/filemap.c b/mm/filemap.c
index b4858d89f1b1..2668bac68df7 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -3181,6 +3181,42 @@ static struct file *do_async_mmap_readahead(struct vm_fault *vmf,
return fpin;
}
+/*
+ * filemap_fault_recheck_pte - hold PTL and recheck whether pte is none.
+ * @vmf - the vm_fault for this fault.
+ *
+ * Recheck PTE as the PTE can be cleared temporarily during a read+clear/modify
+ * /write update of the PTE, eg, do_numa_page()/change_pte_range(). This will
+ * trigger an unexpected major fault, even if we use mlockall(), which may
+ * increase IO and thus cause other unexpected behavior.
+ *
+ * Return VM_FAULT_NOPAGE if the PTE is not none or pte_offset_map_lock()
+ * fails. In other cases, 0 is returned.
+ */
+static vm_fault_t filemap_fault_recheck_pte(struct vm_fault *vmf)
+{
+ struct vm_area_struct *vma = vmf->vma;
+ vm_fault_t ret = 0;
+ pte_t *ptep;
+
+ if (!(vma->vm_flags & VM_LOCKED))
+ return ret;
+
+ if (pmd_none(*vmf->pmd))
+ return ret;
+
+ ptep = pte_offset_map_lock(vma->vm_mm, vmf->pmd, vmf->address,
+ &vmf->ptl);
+ if (unlikely(!ptep))
+ return VM_FAULT_NOPAGE;
+
+ if (unlikely(!pte_none(ptep_get(ptep))))
+ ret = VM_FAULT_NOPAGE;
+
+ pte_unmap_unlock(ptep, vmf->ptl);
+ return ret;
+}
+
/**
* filemap_fault - read in file data for page fault handling
* @vmf: struct vm_fault containing details of the fault
@@ -3236,6 +3272,10 @@ vm_fault_t filemap_fault(struct vm_fault *vmf)
mapping_locked = true;
}
} else {
+ ret = filemap_fault_recheck_pte(vmf);
+ if (unlikely(ret))
+ return ret;
+
/* No page in the page cache at all */
count_vm_event(PGMAJFAULT);
count_memcg_event_mm(vmf->vma->vm_mm, PGMAJFAULT);
--
2.25.1