2024-02-29 23:27:42

by Jameson Thies

[permalink] [raw]
Subject: [PATCH v3 0/4] usb: typec: ucsi: Expand SOP/SOP' Discovery

Hi Heikki,

This patch series expands support for partner and cable discover in the
UCSI driver. There are a few pieces here.

1. Some cleanup of the GET_CABLE_PROP definitions in ucsi.h.
2. Cable discovery and registration with the USB Type-C connector class.
3. Partner/Cable identity registration with the USB Type-C connector
class.
4. SOP' alternate mode registration with the USB-C connector class using
a cable plug.

These have been tested on a the usb-testing branch merged with a
chromeOS 6.8-rc2 kernel. Let me know if you have any questions.

Thanks,
Jameson

Changes in v3:
- Fixed CC stable and email threading issue.

Changes in v2:
- Re-ordered memset call and null assignment when unregistering partners
and cables.
- Supports registering partner and cable identity with UCSI versions
before v2.0.
- Shortened lines to within 80 characters with the exception of two
error log lines with three indentations.
- Tested on usb-testing branch merged with chromeOS 6.8-rc2 kernel.

Jameson Thies (4):
usb: typec: ucsi: Clean up UCSI_CABLE_PROP macros
usb: typec: ucsi: Register cables based on GET_CABLE_PROPERTY
usb: typec: ucsi: Register SOP/SOP' Discover Identity Responses
usb: typec: ucsi: Register SOP' alternate modes with cable plug

drivers/usb/typec/ucsi/ucsi.c | 258 ++++++++++++++++++++++++++++++++++
drivers/usb/typec/ucsi/ucsi.h | 40 +++++-
2 files changed, 296 insertions(+), 2 deletions(-)


base-commit: a560a5672826fc1e057068bda93b3d4c98d037a2
--
2.44.0.rc1.240.g4c46232300-goog



2024-02-29 23:28:22

by Jameson Thies

[permalink] [raw]
Subject: [PATCH v3 1/4] usb: typec: ucsi: Clean up UCSI_CABLE_PROP macros

Clean up UCSI_CABLE_PROP macros by fixing a bitmask shifting error for
plug type and updating the modal support macro for consistent naming.

Fixes: 3cf657f07918 ("usb: typec: ucsi: Remove all bit-fields")
Cc: [email protected]
Reviewed-by: Benson Leung <[email protected]>
Reviewed-by: Prashant Malani <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Jameson Thies <[email protected]>
---
Changes in v3:
- Fixed CC stable.

Changes in v2:
- Tested on usb-testing branch merged with chromeOS 6.8-rc2 kernel.

drivers/usb/typec/ucsi/ucsi.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h
index 7e35ffbe0a6f2..469a2baf472e4 100644
--- a/drivers/usb/typec/ucsi/ucsi.h
+++ b/drivers/usb/typec/ucsi/ucsi.h
@@ -259,12 +259,12 @@ struct ucsi_cable_property {
#define UCSI_CABLE_PROP_FLAG_VBUS_IN_CABLE BIT(0)
#define UCSI_CABLE_PROP_FLAG_ACTIVE_CABLE BIT(1)
#define UCSI_CABLE_PROP_FLAG_DIRECTIONALITY BIT(2)
-#define UCSI_CABLE_PROP_FLAG_PLUG_TYPE(_f_) ((_f_) & GENMASK(3, 0))
+#define UCSI_CABLE_PROP_FLAG_PLUG_TYPE(_f_) (((_f_) & GENMASK(4, 3)) >> 3)
#define UCSI_CABLE_PROPERTY_PLUG_TYPE_A 0
#define UCSI_CABLE_PROPERTY_PLUG_TYPE_B 1
#define UCSI_CABLE_PROPERTY_PLUG_TYPE_C 2
#define UCSI_CABLE_PROPERTY_PLUG_OTHER 3
-#define UCSI_CABLE_PROP_MODE_SUPPORT BIT(5)
+#define UCSI_CABLE_PROP_FLAG_MODE_SUPPORT BIT(5)
u8 latency;
} __packed;

--
2.44.0.rc1.240.g4c46232300-goog


2024-02-29 23:28:39

by Jameson Thies

[permalink] [raw]
Subject: [PATCH v3 3/4] usb: typec: ucsi: Register SOP/SOP' Discover Identity Responses

Register SOP and SOP' Discover Identity responses with the USB Type-C
Connector Class as partner and cable identities, respectively. Discover
Identity responses are requested from the PPM using the GET_PD_MESSAGE
UCSI command.

Signed-off-by: Jameson Thies <[email protected]>
---
GET_PD_MESSAGE responses from the PPM populate partner and cable
identity in sysfs:
nospike-rev4 /sys/class/typec # ls port0-partner/identity/
cert_stat id_header product product_type_vdo1 product_type_vdo2
product_type_vdo3
nospike-rev4 /sys/class/typec # ls port0-cable/identity/
cert_stat id_header product product_type_vdo1 product_type_vdo2
product_type_vdo3

Changes in v3:
- None.

Changes in v2:
- Re-ordered memset call and null assignment when unregistering partners
and cables.
- Supports registering partner and cable identity with UCSI versions
before v2.0.
- Shortened lines to within 80 characters with the exception of two
error log lines with three indentations.
- Tested on usb-testing branch merged with chromeOS 6.8-rc2 kernel.

drivers/usb/typec/ucsi/ucsi.c | 125 ++++++++++++++++++++++++++++++++++
drivers/usb/typec/ucsi/ucsi.h | 29 ++++++++
2 files changed, 154 insertions(+)

diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index 7c84687b5d1a3..4088422b33c74 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -646,6 +646,121 @@ static int ucsi_get_src_pdos(struct ucsi_connector *con)
return ret;
}

+static int ucsi_read_identity(struct ucsi_connector *con, u8 recipient,
+ struct usb_pd_identity *id)
+{
+ struct ucsi *ucsi = con->ucsi;
+ struct ucsi_pd_message_disc_id resp = {};
+ u64 command;
+ int ret;
+
+ if (ucsi->version < UCSI_VERSION_2_0) {
+ /*
+ * Before UCSI v2.0, MESSAGE_IN is 16 bytes which cannot fit
+ * the 28 byte identity response including the VDM header.
+ * First request the VDM header, ID Header VDO, Cert Stat VDO
+ * and Product VDO.
+ */
+ command = UCSI_COMMAND(UCSI_GET_PD_MESSAGE) |
+ UCSI_CONNECTOR_NUMBER(con->num);
+ command |= UCSI_GET_PD_MESSAGE_RECIPIENT(recipient);
+ command |= UCSI_GET_PD_MESSAGE_OFFSET(0);
+ command |= UCSI_GET_PD_MESSAGE_BYTES(0x10);
+ command |= UCSI_GET_PD_MESSAGE_TYPE(
+ UCSI_GET_PD_MESSAGE_TYPE_IDENTITY);
+
+ ret = ucsi_send_command(ucsi, command, &resp, 0x10);
+ if (ret < 0) {
+ dev_err(ucsi->dev,
+ "UCSI_GET_PD_MESSAGE v1.2 failed first request (%d)\n",
+ ret);
+ return ret;
+ }
+
+ /* Then request Product Type VDO1 through Product Type VDO3. */
+ command = UCSI_COMMAND(UCSI_GET_PD_MESSAGE) |
+ UCSI_CONNECTOR_NUMBER(con->num);
+ command |= UCSI_GET_PD_MESSAGE_RECIPIENT(recipient);
+ command |= UCSI_GET_PD_MESSAGE_OFFSET(0x10);
+ command |= UCSI_GET_PD_MESSAGE_BYTES(0xc);
+ command |= UCSI_GET_PD_MESSAGE_TYPE(
+ UCSI_GET_PD_MESSAGE_TYPE_IDENTITY);
+
+ ret = ucsi_send_command(ucsi, command, &resp.vdo[0], 0xc);
+ if (ret < 0) {
+ dev_err(ucsi->dev,
+ "UCSI_GET_PD_MESSAGE v1.2 failed second request (%d)\n",
+ ret);
+ return ret;
+ }
+ } else {
+ /*
+ * In UCSI v2.0 and after, MESSAGE_IN is large enough to request
+ * the large enough to request the full Discover Identity
+ * response at once.
+ */
+ command = UCSI_COMMAND(UCSI_GET_PD_MESSAGE) |
+ UCSI_CONNECTOR_NUMBER(con->num);
+ command |= UCSI_GET_PD_MESSAGE_RECIPIENT(recipient);
+ /* VDM Header + 6 VDOs (0x1c bytes) without an offset */
+ command |= UCSI_GET_PD_MESSAGE_OFFSET(0);
+ command |= UCSI_GET_PD_MESSAGE_BYTES(0x1c);
+ command |= UCSI_GET_PD_MESSAGE_TYPE(
+ UCSI_GET_PD_MESSAGE_TYPE_IDENTITY);
+
+ ret = ucsi_send_command(ucsi, command, &resp, sizeof(resp));
+ if (ret < 0) {
+ dev_err(ucsi->dev, "UCSI_GET_PD_MESSAGE failed (%d)\n",
+ ret);
+ return ret;
+ }
+ }
+
+ id->id_header = resp.id_header;
+ id->cert_stat = resp.cert_stat;
+ id->product = resp.product;
+ id->vdo[0] = resp.vdo[0];
+ id->vdo[1] = resp.vdo[1];
+ id->vdo[2] = resp.vdo[2];
+ return 0;
+}
+
+static int ucsi_get_partner_identity(struct ucsi_connector *con)
+{
+ int ret;
+
+ ret = ucsi_read_identity(con, UCSI_RECIPIENT_SOP,
+ &con->partner_identity);
+ if (ret < 0)
+ return ret;
+
+ ret = typec_partner_set_identity(con->partner);
+ if (ret < 0) {
+ dev_err(con->ucsi->dev, "Failed to set partner identity (%d)\n",
+ ret);
+ }
+
+ return ret;
+}
+
+static int ucsi_get_cable_identity(struct ucsi_connector *con)
+{
+ int ret;
+
+ ret = ucsi_read_identity(con, UCSI_RECIPIENT_SOP_P,
+ &con->cable_identity);
+ if (ret < 0)
+ return ret;
+
+ ret = typec_cable_set_identity(con->cable);
+ if (ret < 0) {
+ dev_err(con->ucsi->dev, "Failed to set cable identity (%d)\n",
+ ret);
+ }
+
+ return ret;
+}
+
static int ucsi_check_altmodes(struct ucsi_connector *con)
{
int ret, num_partner_am;
@@ -754,6 +869,7 @@ static int ucsi_register_cable(struct ucsi_connector *con)
break;
}

+ desc.identity = &con->cable_identity;
desc.active = !!(UCSI_CABLE_PROP_FLAG_ACTIVE_CABLE &
con->cable_prop.flags);
desc.pd_revision = UCSI_CABLE_PROP_FLAG_PD_MAJOR_REV_AS_BCD(
@@ -777,6 +893,7 @@ static void ucsi_unregister_cable(struct ucsi_connector *con)
return;

typec_unregister_cable(con->cable);
+ memset(&con->cable_identity, 0, sizeof(con->cable_identity));
con->cable = NULL;
}

@@ -827,6 +944,7 @@ static int ucsi_register_partner(struct ucsi_connector *con)
break;
}

+ desc.identity = &con->partner_identity;
desc.usb_pd = pwr_opmode == UCSI_CONSTAT_PWR_OPMODE_PD;
desc.pd_revision = UCSI_CONCAP_FLAG_PARTNER_PD_MAJOR_REV_AS_BCD(con->cap.flags);

@@ -855,6 +973,7 @@ static void ucsi_unregister_partner(struct ucsi_connector *con)
ucsi_unregister_altmodes(con, UCSI_RECIPIENT_SOP);
ucsi_unregister_cable(con);
typec_unregister_partner(con->partner);
+ memset(&con->partner_identity, 0, sizeof(con->partner_identity));
con->partner = NULL;
}

@@ -975,6 +1094,10 @@ static int ucsi_check_cable(struct ucsi_connector *con)
if (ret < 0)
return ret;

+ ret = ucsi_get_cable_identity(con);
+ if (ret < 0)
+ return ret;
+
return 0;
}

@@ -1019,6 +1142,7 @@ static void ucsi_handle_connector_change(struct work_struct *work)
ucsi_register_partner(con);
ucsi_partner_task(con, ucsi_check_connection, 1, HZ);
ucsi_partner_task(con, ucsi_check_connector_capability, 1, HZ);
+ ucsi_partner_task(con, ucsi_get_partner_identity, 1, HZ);
ucsi_partner_task(con, ucsi_check_cable, 1, HZ);

if (UCSI_CONSTAT_PWR_OPMODE(con->status.flags) ==
@@ -1418,6 +1542,7 @@ static int ucsi_register_port(struct ucsi *ucsi, struct ucsi_connector *con)
ucsi_register_partner(con);
ucsi_pwr_opmode_change(con);
ucsi_port_psy_changed(con);
+ ucsi_get_partner_identity(con);
ucsi_check_cable(con);
}

diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h
index f0aabef0b7c64..b89fae82e8ce7 100644
--- a/drivers/usb/typec/ucsi/ucsi.h
+++ b/drivers/usb/typec/ucsi/ucsi.h
@@ -106,6 +106,7 @@ void ucsi_connector_change(struct ucsi *ucsi, u8 num);
#define UCSI_GET_CABLE_PROPERTY 0x11
#define UCSI_GET_CONNECTOR_STATUS 0x12
#define UCSI_GET_ERROR_STATUS 0x13
+#define UCSI_GET_PD_MESSAGE 0x15

#define UCSI_CONNECTOR_NUMBER(_num_) ((u64)(_num_) << 16)
#define UCSI_COMMAND(_cmd_) ((_cmd_) & 0xff)
@@ -159,6 +160,18 @@ void ucsi_connector_change(struct ucsi *ucsi, u8 num);
#define UCSI_MAX_PDOS (4)
#define UCSI_GET_PDOS_SRC_PDOS ((u64)1 << 34)

+/* GET_PD_MESSAGE command bits */
+#define UCSI_GET_PD_MESSAGE_RECIPIENT(_r_) ((u64)(_r_) << 23)
+#define UCSI_GET_PD_MESSAGE_OFFSET(_r_) ((u64)(_r_) << 26)
+#define UCSI_GET_PD_MESSAGE_BYTES(_r_) ((u64)(_r_) << 34)
+#define UCSI_GET_PD_MESSAGE_TYPE(_r_) ((u64)(_r_) << 42)
+#define UCSI_GET_PD_MESSAGE_TYPE_SNK_CAP_EXT 0
+#define UCSI_GET_PD_MESSAGE_TYPE_SRC_CAP_EXT 1
+#define UCSI_GET_PD_MESSAGE_TYPE_BAT_CAP 2
+#define UCSI_GET_PD_MESSAGE_TYPE_BAT_STAT 3
+#define UCSI_GET_PD_MESSAGE_TYPE_IDENTITY 4
+#define UCSI_GET_PD_MESSAGE_TYPE_REVISION 5
+
/* -------------------------------------------------------------------------- */

/* Error information returned by PPM in response to GET_ERROR_STATUS command. */
@@ -338,6 +351,18 @@ struct ucsi_connector_status {
((get_unaligned_le32(&(_p_)[5]) & GENMASK(16, 1)) >> 1)
} __packed;

+/*
+ * Data structure filled by PPM in response to GET_PD_MESSAGE command with the
+ * Response Message Type set to Discover Identity Response.
+ */
+struct ucsi_pd_message_disc_id {
+ u32 vdm_header;
+ u32 id_header;
+ u32 cert_stat;
+ u32 product;
+ u32 vdo[3];
+} __packed;
+
/* -------------------------------------------------------------------------- */

struct ucsi_debugfs_entry {
@@ -428,6 +453,10 @@ struct ucsi_connector {
struct usb_power_delivery_capabilities *partner_sink_caps;

struct usb_role_switch *usb_role_sw;
+
+ /* USB PD identity */
+ struct usb_pd_identity partner_identity;
+ struct usb_pd_identity cable_identity;
};

int ucsi_send_command(struct ucsi *ucsi, u64 command,
--
2.44.0.rc1.240.g4c46232300-goog


2024-02-29 23:28:45

by Jameson Thies

[permalink] [raw]
Subject: [PATCH v3 2/4] usb: typec: ucsi: Register cables based on GET_CABLE_PROPERTY

Register cables with the Type-C Connector Class in the UCSI driver based
on the PPM response to GET_CABLE_PROPERTY. Registered cable properties
include plug type, cable type and major revision.

Reviewed-by: Benson Leung <[email protected]>
Reviewed-by: Prashant Malani <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
Signed-off-by: Jameson Thies <[email protected]>
---
Expected cable properties populate the USB Type-C connector class sysfs
paths:
nospike-rev4 /sys/class/typec # ls port0-cable
device identity plug_type port0-plug0 power subsystem type uevent
usb_power_delivery_revision

Changes in v3:
- None.

Changes in v2:
- Shortened lines to within 80 characters.
- Tested on usb-testing branch merged with chromeOS 6.8-rc2 kernel.

drivers/usb/typec/ucsi/ucsi.c | 73 +++++++++++++++++++++++++++++++++++
drivers/usb/typec/ucsi/ucsi.h | 5 +++
2 files changed, 78 insertions(+)

diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index ae105383e69e7..7c84687b5d1a3 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -734,6 +734,52 @@ static void ucsi_unregister_partner_pdos(struct ucsi_connector *con)
con->partner_pd = NULL;
}

+static int ucsi_register_cable(struct ucsi_connector *con)
+{
+ struct typec_cable *cable;
+ struct typec_cable_desc desc = {};
+
+ switch (UCSI_CABLE_PROP_FLAG_PLUG_TYPE(con->cable_prop.flags)) {
+ case UCSI_CABLE_PROPERTY_PLUG_TYPE_A:
+ desc.type = USB_PLUG_TYPE_A;
+ break;
+ case UCSI_CABLE_PROPERTY_PLUG_TYPE_B:
+ desc.type = USB_PLUG_TYPE_B;
+ break;
+ case UCSI_CABLE_PROPERTY_PLUG_TYPE_C:
+ desc.type = USB_PLUG_TYPE_C;
+ break;
+ default:
+ desc.type = USB_PLUG_NONE;
+ break;
+ }
+
+ desc.active = !!(UCSI_CABLE_PROP_FLAG_ACTIVE_CABLE &
+ con->cable_prop.flags);
+ desc.pd_revision = UCSI_CABLE_PROP_FLAG_PD_MAJOR_REV_AS_BCD(
+ con->cable_prop.flags);
+
+ cable = typec_register_cable(con->port, &desc);
+ if (IS_ERR(cable)) {
+ dev_err(con->ucsi->dev,
+ "con%d: failed to register cable (%ld)\n", con->num,
+ PTR_ERR(cable));
+ return PTR_ERR(cable);
+ }
+
+ con->cable = cable;
+ return 0;
+}
+
+static void ucsi_unregister_cable(struct ucsi_connector *con)
+{
+ if (!con->cable)
+ return;
+
+ typec_unregister_cable(con->cable);
+ con->cable = NULL;
+}
+
static void ucsi_pwr_opmode_change(struct ucsi_connector *con)
{
switch (UCSI_CONSTAT_PWR_OPMODE(con->status.flags)) {
@@ -807,6 +853,7 @@ static void ucsi_unregister_partner(struct ucsi_connector *con)
typec_partner_set_usb_power_delivery(con->partner, NULL);
ucsi_unregister_partner_pdos(con);
ucsi_unregister_altmodes(con, UCSI_RECIPIENT_SOP);
+ ucsi_unregister_cable(con);
typec_unregister_partner(con->partner);
con->partner = NULL;
}
@@ -907,6 +954,30 @@ static int ucsi_check_connection(struct ucsi_connector *con)
return 0;
}

+static int ucsi_check_cable(struct ucsi_connector *con)
+{
+ u64 command;
+ int ret;
+
+ if (con->cable)
+ return 0;
+
+ command = UCSI_GET_CABLE_PROPERTY | UCSI_CONNECTOR_NUMBER(con->num);
+ ret = ucsi_send_command(con->ucsi, command, &con->cable_prop,
+ sizeof(con->cable_prop));
+ if (ret < 0) {
+ dev_err(con->ucsi->dev, "GET_CABLE_PROPERTY failed (%d)\n",
+ ret);
+ return ret;
+ }
+
+ ret = ucsi_register_cable(con);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
static void ucsi_handle_connector_change(struct work_struct *work)
{
struct ucsi_connector *con = container_of(work, struct ucsi_connector,
@@ -948,6 +1019,7 @@ static void ucsi_handle_connector_change(struct work_struct *work)
ucsi_register_partner(con);
ucsi_partner_task(con, ucsi_check_connection, 1, HZ);
ucsi_partner_task(con, ucsi_check_connector_capability, 1, HZ);
+ ucsi_partner_task(con, ucsi_check_cable, 1, HZ);

if (UCSI_CONSTAT_PWR_OPMODE(con->status.flags) ==
UCSI_CONSTAT_PWR_OPMODE_PD)
@@ -1346,6 +1418,7 @@ static int ucsi_register_port(struct ucsi *ucsi, struct ucsi_connector *con)
ucsi_register_partner(con);
ucsi_pwr_opmode_change(con);
ucsi_port_psy_changed(con);
+ ucsi_check_cable(con);
}

/* Only notify USB controller if partner supports USB data */
diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h
index 469a2baf472e4..f0aabef0b7c64 100644
--- a/drivers/usb/typec/ucsi/ucsi.h
+++ b/drivers/usb/typec/ucsi/ucsi.h
@@ -265,6 +265,9 @@ struct ucsi_cable_property {
#define UCSI_CABLE_PROPERTY_PLUG_TYPE_C 2
#define UCSI_CABLE_PROPERTY_PLUG_OTHER 3
#define UCSI_CABLE_PROP_FLAG_MODE_SUPPORT BIT(5)
+#define UCSI_CABLE_PROP_FLAG_PD_MAJOR_REV(_f_) (((_f_) & GENMASK(7, 6)) >> 6)
+#define UCSI_CABLE_PROP_FLAG_PD_MAJOR_REV_AS_BCD(_f_) \
+ UCSI_SPEC_REVISION_TO_BCD(UCSI_CABLE_PROP_FLAG_PD_MAJOR_REV(_f_))
u8 latency;
} __packed;

@@ -400,6 +403,7 @@ struct ucsi_connector {

struct typec_port *port;
struct typec_partner *partner;
+ struct typec_cable *cable;

struct typec_altmode *port_altmode[UCSI_MAX_ALTMODES];
struct typec_altmode *partner_altmode[UCSI_MAX_ALTMODES];
@@ -408,6 +412,7 @@ struct ucsi_connector {

struct ucsi_connector_status status;
struct ucsi_connector_capability cap;
+ struct ucsi_cable_property cable_prop;
struct power_supply *psy;
struct power_supply_desc psy_desc;
u32 rdo;
--
2.44.0.rc1.240.g4c46232300-goog


2024-02-29 23:29:01

by Jameson Thies

[permalink] [raw]
Subject: [PATCH v3 4/4] usb: typec: ucsi: Register SOP' alternate modes with cable plug

Register SOP' alternate modes with a Type-C Connector Class cable plug.
Alternate modes are queried from the PPM using the GET_ALTERNATE_MODES
command with recipient set to SOP'.

Reviewed-by: Benson Leung <[email protected]>
Reviewed-by: Prashant Malani <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
Signed-off-by: Jameson Thies <[email protected]>
---
SOP' GET_ALTERNATE_MODE responses from the PPM are correctly registered
to the cable plug.
nospike-rev4 /sys/class/typec # ls port0-cable/port0-plug0/
device port0-plug0.0 port0-plug0.1 power subsystem uevent

Changes in v3:
- None.

Changes in v2:
- Shortened lines to within 80 characters.
- Tested on usb-testing branch merged with chromeOS 6.8-rc2 kernel.

drivers/usb/typec/ucsi/ucsi.c | 60 +++++++++++++++++++++++++++++++++++
drivers/usb/typec/ucsi/ucsi.h | 2 ++
2 files changed, 62 insertions(+)

diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index 4088422b33c74..281954fe9d855 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -399,6 +399,27 @@ static int ucsi_register_altmode(struct ucsi_connector *con,

con->partner_altmode[i] = alt;
break;
+ case UCSI_RECIPIENT_SOP_P:
+ i = ucsi_next_altmode(con->plug_altmode);
+ if (i < 0) {
+ ret = i;
+ goto err;
+ }
+
+ ret = ucsi_altmode_next_mode(con->plug_altmode, desc->svid);
+ if (ret < 0)
+ return ret;
+
+ desc->mode = ret;
+
+ alt = typec_plug_register_altmode(con->plug, desc);
+ if (IS_ERR(alt)) {
+ ret = PTR_ERR(alt);
+ goto err;
+ }
+
+ con->plug_altmode[i] = alt;
+ break;
default:
return -EINVAL;
}
@@ -566,6 +587,9 @@ static void ucsi_unregister_altmodes(struct ucsi_connector *con, u8 recipient)
case UCSI_RECIPIENT_SOP:
adev = con->partner_altmode;
break;
+ case UCSI_RECIPIENT_SOP_P:
+ adev = con->plug_altmode;
+ break;
default:
return;
}
@@ -849,6 +873,33 @@ static void ucsi_unregister_partner_pdos(struct ucsi_connector *con)
con->partner_pd = NULL;
}

+static int ucsi_register_plug(struct ucsi_connector *con)
+{
+ struct typec_plug *plug;
+ struct typec_plug_desc desc = {.index = TYPEC_PLUG_SOP_P};
+
+ plug = typec_register_plug(con->cable, &desc);
+ if (IS_ERR(plug)) {
+ dev_err(con->ucsi->dev,
+ "con%d: failed to register plug (%ld)\n", con->num,
+ PTR_ERR(plug));
+ return PTR_ERR(plug);
+ }
+
+ con->plug = plug;
+ return 0;
+}
+
+static void ucsi_unregister_plug(struct ucsi_connector *con)
+{
+ if (!con->plug)
+ return;
+
+ ucsi_unregister_altmodes(con, UCSI_RECIPIENT_SOP_P);
+ typec_unregister_plug(con->plug);
+ con->plug = NULL;
+}
+
static int ucsi_register_cable(struct ucsi_connector *con)
{
struct typec_cable *cable;
@@ -892,6 +943,7 @@ static void ucsi_unregister_cable(struct ucsi_connector *con)
if (!con->cable)
return;

+ ucsi_unregister_plug(con);
typec_unregister_cable(con->cable);
memset(&con->cable_identity, 0, sizeof(con->cable_identity));
con->cable = NULL;
@@ -1098,6 +1150,14 @@ static int ucsi_check_cable(struct ucsi_connector *con)
if (ret < 0)
return ret;

+ ret = ucsi_register_plug(con);
+ if (ret < 0)
+ return ret;
+
+ ret = ucsi_register_altmodes(con, UCSI_RECIPIENT_SOP_P);
+ if (ret < 0)
+ return ret;
+
return 0;
}

diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h
index b89fae82e8ce7..32daf5f586505 100644
--- a/drivers/usb/typec/ucsi/ucsi.h
+++ b/drivers/usb/typec/ucsi/ucsi.h
@@ -429,9 +429,11 @@ struct ucsi_connector {
struct typec_port *port;
struct typec_partner *partner;
struct typec_cable *cable;
+ struct typec_plug *plug;

struct typec_altmode *port_altmode[UCSI_MAX_ALTMODES];
struct typec_altmode *partner_altmode[UCSI_MAX_ALTMODES];
+ struct typec_altmode *plug_altmode[UCSI_MAX_ALTMODES];

struct typec_capability typec_cap;

--
2.44.0.rc1.240.g4c46232300-goog


2024-03-01 01:19:54

by Benson Leung

[permalink] [raw]
Subject: Re: [PATCH v3 3/4] usb: typec: ucsi: Register SOP/SOP' Discover Identity Responses

Hi Jameson,

On Thu, Feb 29, 2024 at 11:26:24PM +0000, Jameson Thies wrote:
> Register SOP and SOP' Discover Identity responses with the USB Type-C
> Connector Class as partner and cable identities, respectively. Discover
> Identity responses are requested from the PPM using the GET_PD_MESSAGE
> UCSI command.
>
> Signed-off-by: Jameson Thies <[email protected]>

Reviewed-by: Benson Leung <[email protected]>

> ---
> GET_PD_MESSAGE responses from the PPM populate partner and cable
> identity in sysfs:
> nospike-rev4 /sys/class/typec # ls port0-partner/identity/
> cert_stat id_header product product_type_vdo1 product_type_vdo2
> product_type_vdo3
> nospike-rev4 /sys/class/typec # ls port0-cable/identity/
> cert_stat id_header product product_type_vdo1 product_type_vdo2
> product_type_vdo3
>
> Changes in v3:
> - None.
>
> Changes in v2:
> - Re-ordered memset call and null assignment when unregistering partners
> and cables.
> - Supports registering partner and cable identity with UCSI versions
> before v2.0.
> - Shortened lines to within 80 characters with the exception of two
> error log lines with three indentations.
> - Tested on usb-testing branch merged with chromeOS 6.8-rc2 kernel.
>
> drivers/usb/typec/ucsi/ucsi.c | 125 ++++++++++++++++++++++++++++++++++
> drivers/usb/typec/ucsi/ucsi.h | 29 ++++++++
> 2 files changed, 154 insertions(+)
>
> diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
> index 7c84687b5d1a3..4088422b33c74 100644
> --- a/drivers/usb/typec/ucsi/ucsi.c
> +++ b/drivers/usb/typec/ucsi/ucsi.c
> @@ -646,6 +646,121 @@ static int ucsi_get_src_pdos(struct ucsi_connector *con)
> return ret;
> }
>
> +static int ucsi_read_identity(struct ucsi_connector *con, u8 recipient,
> + struct usb_pd_identity *id)
> +{
> + struct ucsi *ucsi = con->ucsi;
> + struct ucsi_pd_message_disc_id resp = {};
> + u64 command;
> + int ret;
> +
> + if (ucsi->version < UCSI_VERSION_2_0) {
> + /*
> + * Before UCSI v2.0, MESSAGE_IN is 16 bytes which cannot fit
> + * the 28 byte identity response including the VDM header.
> + * First request the VDM header, ID Header VDO, Cert Stat VDO
> + * and Product VDO.
> + */
> + command = UCSI_COMMAND(UCSI_GET_PD_MESSAGE) |
> + UCSI_CONNECTOR_NUMBER(con->num);
> + command |= UCSI_GET_PD_MESSAGE_RECIPIENT(recipient);
> + command |= UCSI_GET_PD_MESSAGE_OFFSET(0);
> + command |= UCSI_GET_PD_MESSAGE_BYTES(0x10);
> + command |= UCSI_GET_PD_MESSAGE_TYPE(
> + UCSI_GET_PD_MESSAGE_TYPE_IDENTITY);
> +
> + ret = ucsi_send_command(ucsi, command, &resp, 0x10);
> + if (ret < 0) {
> + dev_err(ucsi->dev,
> + "UCSI_GET_PD_MESSAGE v1.2 failed first request (%d)\n",
> + ret);
> + return ret;
> + }
> +
> + /* Then request Product Type VDO1 through Product Type VDO3. */
> + command = UCSI_COMMAND(UCSI_GET_PD_MESSAGE) |
> + UCSI_CONNECTOR_NUMBER(con->num);
> + command |= UCSI_GET_PD_MESSAGE_RECIPIENT(recipient);
> + command |= UCSI_GET_PD_MESSAGE_OFFSET(0x10);
> + command |= UCSI_GET_PD_MESSAGE_BYTES(0xc);
> + command |= UCSI_GET_PD_MESSAGE_TYPE(
> + UCSI_GET_PD_MESSAGE_TYPE_IDENTITY);
> +
> + ret = ucsi_send_command(ucsi, command, &resp.vdo[0], 0xc);
> + if (ret < 0) {
> + dev_err(ucsi->dev,
> + "UCSI_GET_PD_MESSAGE v1.2 failed second request (%d)\n",
> + ret);
> + return ret;
> + }
> + } else {
> + /*
> + * In UCSI v2.0 and after, MESSAGE_IN is large enough to request
> + * the large enough to request the full Discover Identity
> + * response at once.
> + */
> + command = UCSI_COMMAND(UCSI_GET_PD_MESSAGE) |
> + UCSI_CONNECTOR_NUMBER(con->num);
> + command |= UCSI_GET_PD_MESSAGE_RECIPIENT(recipient);
> + /* VDM Header + 6 VDOs (0x1c bytes) without an offset */
> + command |= UCSI_GET_PD_MESSAGE_OFFSET(0);
> + command |= UCSI_GET_PD_MESSAGE_BYTES(0x1c);
> + command |= UCSI_GET_PD_MESSAGE_TYPE(
> + UCSI_GET_PD_MESSAGE_TYPE_IDENTITY);
> +
> + ret = ucsi_send_command(ucsi, command, &resp, sizeof(resp));
> + if (ret < 0) {
> + dev_err(ucsi->dev, "UCSI_GET_PD_MESSAGE failed (%d)\n",
> + ret);
> + return ret;
> + }
> + }
> +
> + id->id_header = resp.id_header;
> + id->cert_stat = resp.cert_stat;
> + id->product = resp.product;
> + id->vdo[0] = resp.vdo[0];
> + id->vdo[1] = resp.vdo[1];
> + id->vdo[2] = resp.vdo[2];
> + return 0;
> +}
> +
> +static int ucsi_get_partner_identity(struct ucsi_connector *con)
> +{
> + int ret;
> +
> + ret = ucsi_read_identity(con, UCSI_RECIPIENT_SOP,
> + &con->partner_identity);
> + if (ret < 0)
> + return ret;
> +
> + ret = typec_partner_set_identity(con->partner);
> + if (ret < 0) {
> + dev_err(con->ucsi->dev, "Failed to set partner identity (%d)\n",
> + ret);
> + }
> +
> + return ret;
> +}
> +
> +static int ucsi_get_cable_identity(struct ucsi_connector *con)
> +{
> + int ret;
> +
> + ret = ucsi_read_identity(con, UCSI_RECIPIENT_SOP_P,
> + &con->cable_identity);
> + if (ret < 0)
> + return ret;
> +
> + ret = typec_cable_set_identity(con->cable);
> + if (ret < 0) {
> + dev_err(con->ucsi->dev, "Failed to set cable identity (%d)\n",
> + ret);
> + }
> +
> + return ret;
> +}
> +
> static int ucsi_check_altmodes(struct ucsi_connector *con)
> {
> int ret, num_partner_am;
> @@ -754,6 +869,7 @@ static int ucsi_register_cable(struct ucsi_connector *con)
> break;
> }
>
> + desc.identity = &con->cable_identity;
> desc.active = !!(UCSI_CABLE_PROP_FLAG_ACTIVE_CABLE &
> con->cable_prop.flags);
> desc.pd_revision = UCSI_CABLE_PROP_FLAG_PD_MAJOR_REV_AS_BCD(
> @@ -777,6 +893,7 @@ static void ucsi_unregister_cable(struct ucsi_connector *con)
> return;
>
> typec_unregister_cable(con->cable);
> + memset(&con->cable_identity, 0, sizeof(con->cable_identity));
> con->cable = NULL;
> }
>
> @@ -827,6 +944,7 @@ static int ucsi_register_partner(struct ucsi_connector *con)
> break;
> }
>
> + desc.identity = &con->partner_identity;
> desc.usb_pd = pwr_opmode == UCSI_CONSTAT_PWR_OPMODE_PD;
> desc.pd_revision = UCSI_CONCAP_FLAG_PARTNER_PD_MAJOR_REV_AS_BCD(con->cap.flags);
>
> @@ -855,6 +973,7 @@ static void ucsi_unregister_partner(struct ucsi_connector *con)
> ucsi_unregister_altmodes(con, UCSI_RECIPIENT_SOP);
> ucsi_unregister_cable(con);
> typec_unregister_partner(con->partner);
> + memset(&con->partner_identity, 0, sizeof(con->partner_identity));
> con->partner = NULL;
> }
>
> @@ -975,6 +1094,10 @@ static int ucsi_check_cable(struct ucsi_connector *con)
> if (ret < 0)
> return ret;
>
> + ret = ucsi_get_cable_identity(con);
> + if (ret < 0)
> + return ret;
> +
> return 0;
> }
>
> @@ -1019,6 +1142,7 @@ static void ucsi_handle_connector_change(struct work_struct *work)
> ucsi_register_partner(con);
> ucsi_partner_task(con, ucsi_check_connection, 1, HZ);
> ucsi_partner_task(con, ucsi_check_connector_capability, 1, HZ);
> + ucsi_partner_task(con, ucsi_get_partner_identity, 1, HZ);
> ucsi_partner_task(con, ucsi_check_cable, 1, HZ);
>
> if (UCSI_CONSTAT_PWR_OPMODE(con->status.flags) ==
> @@ -1418,6 +1542,7 @@ static int ucsi_register_port(struct ucsi *ucsi, struct ucsi_connector *con)
> ucsi_register_partner(con);
> ucsi_pwr_opmode_change(con);
> ucsi_port_psy_changed(con);
> + ucsi_get_partner_identity(con);
> ucsi_check_cable(con);
> }
>
> diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h
> index f0aabef0b7c64..b89fae82e8ce7 100644
> --- a/drivers/usb/typec/ucsi/ucsi.h
> +++ b/drivers/usb/typec/ucsi/ucsi.h
> @@ -106,6 +106,7 @@ void ucsi_connector_change(struct ucsi *ucsi, u8 num);
> #define UCSI_GET_CABLE_PROPERTY 0x11
> #define UCSI_GET_CONNECTOR_STATUS 0x12
> #define UCSI_GET_ERROR_STATUS 0x13
> +#define UCSI_GET_PD_MESSAGE 0x15
>
> #define UCSI_CONNECTOR_NUMBER(_num_) ((u64)(_num_) << 16)
> #define UCSI_COMMAND(_cmd_) ((_cmd_) & 0xff)
> @@ -159,6 +160,18 @@ void ucsi_connector_change(struct ucsi *ucsi, u8 num);
> #define UCSI_MAX_PDOS (4)
> #define UCSI_GET_PDOS_SRC_PDOS ((u64)1 << 34)
>
> +/* GET_PD_MESSAGE command bits */
> +#define UCSI_GET_PD_MESSAGE_RECIPIENT(_r_) ((u64)(_r_) << 23)
> +#define UCSI_GET_PD_MESSAGE_OFFSET(_r_) ((u64)(_r_) << 26)
> +#define UCSI_GET_PD_MESSAGE_BYTES(_r_) ((u64)(_r_) << 34)
> +#define UCSI_GET_PD_MESSAGE_TYPE(_r_) ((u64)(_r_) << 42)
> +#define UCSI_GET_PD_MESSAGE_TYPE_SNK_CAP_EXT 0
> +#define UCSI_GET_PD_MESSAGE_TYPE_SRC_CAP_EXT 1
> +#define UCSI_GET_PD_MESSAGE_TYPE_BAT_CAP 2
> +#define UCSI_GET_PD_MESSAGE_TYPE_BAT_STAT 3
> +#define UCSI_GET_PD_MESSAGE_TYPE_IDENTITY 4
> +#define UCSI_GET_PD_MESSAGE_TYPE_REVISION 5
> +
> /* -------------------------------------------------------------------------- */
>
> /* Error information returned by PPM in response to GET_ERROR_STATUS command. */
> @@ -338,6 +351,18 @@ struct ucsi_connector_status {
> ((get_unaligned_le32(&(_p_)[5]) & GENMASK(16, 1)) >> 1)
> } __packed;
>
> +/*
> + * Data structure filled by PPM in response to GET_PD_MESSAGE command with the
> + * Response Message Type set to Discover Identity Response.
> + */
> +struct ucsi_pd_message_disc_id {
> + u32 vdm_header;
> + u32 id_header;
> + u32 cert_stat;
> + u32 product;
> + u32 vdo[3];
> +} __packed;
> +
> /* -------------------------------------------------------------------------- */
>
> struct ucsi_debugfs_entry {
> @@ -428,6 +453,10 @@ struct ucsi_connector {
> struct usb_power_delivery_capabilities *partner_sink_caps;
>
> struct usb_role_switch *usb_role_sw;
> +
> + /* USB PD identity */
> + struct usb_pd_identity partner_identity;
> + struct usb_pd_identity cable_identity;
> };
>
> int ucsi_send_command(struct ucsi *ucsi, u64 command,
> --
> 2.44.0.rc1.240.g4c46232300-goog
>


Attachments:
(No filename) (9.82 kB)
signature.asc (235.00 B)
Download all attachments

2024-03-01 19:38:16

by Prashant Malani

[permalink] [raw]
Subject: Re: [PATCH v3 3/4] usb: typec: ucsi: Register SOP/SOP' Discover Identity Responses

On Thu, Feb 29, 2024 at 3:28 PM Jameson Thies <[email protected]> wrote:
> diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
> index 7c84687b5d1a3..4088422b33c74 100644
> --- a/drivers/usb/typec/ucsi/ucsi.c
> +++ b/drivers/usb/typec/ucsi/ucsi.c
> @@ -646,6 +646,121 @@ static int ucsi_get_src_pdos(struct ucsi_connector *con)
> return ret;
> }
>
> +static int ucsi_read_identity(struct ucsi_connector *con, u8 recipient,
> + struct usb_pd_identity *id)
> +{
> + struct ucsi *ucsi = con->ucsi;
> + struct ucsi_pd_message_disc_id resp = {};
> + u64 command;
> + int ret;
> +
> + if (ucsi->version < UCSI_VERSION_2_0) {
> + /*
> + * Before UCSI v2.0, MESSAGE_IN is 16 bytes which cannot fit
> + * the 28 byte identity response including the VDM header.
> + * First request the VDM header, ID Header VDO, Cert Stat VDO
> + * and Product VDO.
> + */
> + command = UCSI_COMMAND(UCSI_GET_PD_MESSAGE) |
> + UCSI_CONNECTOR_NUMBER(con->num);
> + command |= UCSI_GET_PD_MESSAGE_RECIPIENT(recipient);
> + command |= UCSI_GET_PD_MESSAGE_OFFSET(0);
> + command |= UCSI_GET_PD_MESSAGE_BYTES(0x10);
> + command |= UCSI_GET_PD_MESSAGE_TYPE(
> + UCSI_GET_PD_MESSAGE_TYPE_IDENTITY);
> +
> + ret = ucsi_send_command(ucsi, command, &resp, 0x10);
> + if (ret < 0) {
> + dev_err(ucsi->dev,
> + "UCSI_GET_PD_MESSAGE v1.2 failed first request (%d)\n",
> + ret);
> + return ret;
> + }
> +
> + /* Then request Product Type VDO1 through Product Type VDO3. */
> + command = UCSI_COMMAND(UCSI_GET_PD_MESSAGE) |
> + UCSI_CONNECTOR_NUMBER(con->num);
> + command |= UCSI_GET_PD_MESSAGE_RECIPIENT(recipient);
> + command |= UCSI_GET_PD_MESSAGE_OFFSET(0x10);
> + command |= UCSI_GET_PD_MESSAGE_BYTES(0xc);
> + command |= UCSI_GET_PD_MESSAGE_TYPE(
> + UCSI_GET_PD_MESSAGE_TYPE_IDENTITY);
> +
> + ret = ucsi_send_command(ucsi, command, &resp.vdo[0], 0xc);
> + if (ret < 0) {
> + dev_err(ucsi->dev,
> + "UCSI_GET_PD_MESSAGE v1.2 failed second request (%d)\n",
> + ret);
> + return ret;
> + }
> + } else {
> + /*
> + * In UCSI v2.0 and after, MESSAGE_IN is large enough to request
> + * the large enough to request the full Discover Identity
> + * response at once.
> + */
> + command = UCSI_COMMAND(UCSI_GET_PD_MESSAGE) |
> + UCSI_CONNECTOR_NUMBER(con->num);
> + command |= UCSI_GET_PD_MESSAGE_RECIPIENT(recipient);
> + /* VDM Header + 6 VDOs (0x1c bytes) without an offset */
> + command |= UCSI_GET_PD_MESSAGE_OFFSET(0);
> + command |= UCSI_GET_PD_MESSAGE_BYTES(0x1c);
> + command |= UCSI_GET_PD_MESSAGE_TYPE(
> + UCSI_GET_PD_MESSAGE_TYPE_IDENTITY);
> +
> + ret = ucsi_send_command(ucsi, command, &resp, sizeof(resp));
> + if (ret < 0) {
> + dev_err(ucsi->dev, "UCSI_GET_PD_MESSAGE failed (%d)\n",
> + ret);
> + return ret;
> + }
> + }
> +
> + id->id_header = resp.id_header;
> + id->cert_stat = resp.cert_stat;
> + id->product = resp.product;
> + id->vdo[0] = resp.vdo[0];
> + id->vdo[1] = resp.vdo[1];
> + id->vdo[2] = resp.vdo[2];
> + return 0;
> +}

There is some repetition here, both with the "if" block and the
UCSI command itself. You can factor out the command setup code into a separate
function (it can take offset and size as arguments). Then, factor out
common parts in the "if" block. For example:

int ucsi_pd_message_get_identity(struct *ucsi, u8 offset, u8 size, u8 recipient,
void *data) {
u64 command = UCSI_COMMAND(UCSI_GET_PD_MESSAGE) |
UCSI_CONNECTOR_NUMBER(ucsi->con->num) |
UCSI_GET_PD_MESSAGE_RECIPIENT(recipient) |
UCSI_GET_PD_MESSAGE_OFFSET(offset) |
UCSI_GET_PD_MESSAGE_BYTES(size) |

UCSI_GET_PD_MESSAGE_TYPE(UCSI_GET_PD_MESSAGE_TYPE_IDENTITY);

return ucsi_send_command(ucsi, command, data, size);
}

Then in the ucsi_read_identity() :
u8 offset = 0;
u8 size;

/*
* In UCSI v2.0 and after, MESSAGE_IN is large enough to request
* the large enough to request the full Discover Identity
* response at once.
*/
if (ucsi->version >= UCSI_VERSION_2_0) {
size = 0x1c;
else
size = 0x10;

ret = ucsi_pd_message_get_identity(ucsi, offset, size, &resp);
if (ret < 0) {
/* Handle error */
}

/* Request Product Type VDO1 through Product Type VDO3. */
if (ucsi->version < UCSI_VERSION_2_0) {
offset = 0x10;
size = 0xC;
ret = ucsi_pd_message_get_identity(ucsi, offset, size,
&resp.vdo[0]);
if (ret < 0) {
/* Handle error */
}
}

BR,

-Prashant

2024-03-05 02:59:17

by Jameson Thies

[permalink] [raw]
Subject: Re: [PATCH v3 3/4] usb: typec: ucsi: Register SOP/SOP' Discover Identity Responses

> There is some repetition here, both with the "if" block and the
> UCSI command itself. You can factor out the command setup code into a separate
> function (it can take offset and size as arguments). Then, factor out
> common parts in the "if" block. For example:

Hi Prashant,
thank you for the feedback. I'll upload a v4 series to resolve this redundancy.