2024-03-01 11:14:28

by Dimitri Fedrau

[permalink] [raw]
Subject: [PATCH v2 1/3] dt-bindings: pwm: add support for MC33XS2410

Adding documentation for NXPs MC33XS2410 high side switch.

Signed-off-by: Dimitri Fedrau <[email protected]>
---
.../bindings/pwm/nxp,mc33xs2410.yaml | 118 ++++++++++++++++++
1 file changed, 118 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pwm/nxp,mc33xs2410.yaml

diff --git a/Documentation/devicetree/bindings/pwm/nxp,mc33xs2410.yaml b/Documentation/devicetree/bindings/pwm/nxp,mc33xs2410.yaml
new file mode 100644
index 000000000000..1729fe5c3dfb
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/nxp,mc33xs2410.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/nxp,mc33xs2410.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: High-side switch MC33XS2410
+
+maintainers:
+ - Dimitri Fedrau <[email protected]>
+
+allOf:
+ - $ref: pwm.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ const: nxp,mc33xs2410
+
+ reg:
+ maxItems: 1
+
+ spi-max-frequency:
+ maximum: 10000000
+
+ spi-cpha: true
+
+ spi-cs-setup-delay-ns:
+ minimum: 100
+ default: 100
+
+ spi-cs-hold-delay-ns:
+ minimum: 10
+ default: 10
+
+ spi-cs-inactive-delay-ns:
+ minimum: 300
+ default: 300
+
+ reset-gpios:
+ description:
+ GPIO connected to the active low reset pin.
+ maxItems: 1
+
+ "#pwm-cells":
+ const: 3
+
+ pwm-names:
+ items:
+ - const: di0
+ - const: di1
+ - const: di2
+ - const: di3
+
+ pwms:
+ description:
+ Direct inputs(di0-3) are used to directly turn-on or turn-off the
+ outputs.
+ maxItems: 4
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ description:
+ The external clock can be used if the internal clock doesn't meet
+ timing requirements over temperature and voltage operating range.
+ maxItems: 1
+
+ vdd-supply:
+ description:
+ Logic supply voltage
+
+ vspi-supply:
+ description:
+ Supply voltage for SPI
+
+ vpwr-supply:
+ description:
+ Power switch supply
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pwm@0 {
+ compatible = "nxp,mc33xs2410";
+ reg = <0x0>;
+ spi-max-frequency = <4000000>;
+ spi-cpha;
+ spi-cs-setup-delay-ns = <100>;
+ spi-cs-hold-delay-ns = <10>;
+ spi-cs-inactive-delay-ns = <300>;
+ reset-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+ #pwm-cells = <3>;
+ pwm-names = "di0", "di1", "di2", "di3";
+ pwms = <&pwm0 0 1000000>,
+ <&pwm1 0 1000000>,
+ <&pwm2 0 1000000>,
+ <&pwm3 0 1000000>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk_ext_fixed>;
+ vdd-supply = <&reg_3v3>;
+ vspi-supply = <&reg_3v3>;
+ vpwr-supply = <&reg_24v0>;
+ };
+ };
--
2.39.2



2024-03-01 12:30:31

by Krzysztof Kozlowski

[permalink] [raw]
Subject: Re: [PATCH v2 1/3] dt-bindings: pwm: add support for MC33XS2410

On 01/03/2024 12:11, Dimitri Fedrau wrote:
> Adding documentation for NXPs MC33XS2410 high side switch.
>
> Signed-off-by: Dimitri Fedrau <[email protected]>
> ---
> .../bindings/pwm/nxp,mc33xs2410.yaml | 118 ++++++++++++++++++
> 1 file changed, 118 insertions(+)


Reviewed-by: Krzysztof Kozlowski <[email protected]>


---

This is an automated instruction, just in case, because many review tags
are being ignored. If you know the process, you can skip it (please do
not feel offended by me posting it here - no bad intentions intended).
If you do not know the process, here is a short explanation:

Please add Acked-by/Reviewed-by/Tested-by tags when posting new
versions, under or above your Signed-off-by tag. Tag is "received", when
provided in a message replied to you on the mailing list. Tools like b4
can help here. However, there's no need to repost patches *only* to add
the tags. The upstream maintainer will do that for tags received on the
version they apply.

https://elixir.bootlin.com/linux/v6.5-rc3/source/Documentation/process/submitting-patches.rst#L577

Best regards,
Krzysztof