2024-03-04 09:48:00

by Siddharth Vadapalli

[permalink] [raw]
Subject: [PATCH] arm64: dts: ti: k3-j7200-evm: Add overlay for PCIE1 Endpoint Mode

Add overlay to enable the PCIE1 instance of PCIe on J7200-EVM in
Endpoint mode of operation.

Signed-off-by: Siddharth Vadapalli <[email protected]>
---

Hello,

This patch is based on linux-next tagged next-20240304.

Regards,
Siddharth.

arch/arm64/boot/dts/ti/Makefile | 5 ++
.../boot/dts/ti/k3-j7200-evm-pcie1-ep.dtso | 53 +++++++++++++++++++
2 files changed, 58 insertions(+)
create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-evm-pcie1-ep.dtso

diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 9a722c2473fb..0c04db76fd05 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -76,6 +76,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am654-pcie-usb3.dtbo
# Boards with J7200 SoC
k3-j7200-evm-dtbs := k3-j7200-common-proc-board.dtb k3-j7200-evm-quad-port-eth-exp.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-j7200-evm.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-j7200-evm-pcie1-ep.dtbo

# Boards with J721e SoC
k3-j721e-evm-dtbs := k3-j721e-common-proc-board.dtb k3-j721e-evm-quad-port-eth-exp.dtbo
@@ -139,6 +140,8 @@ k3-am68-sk-base-board-csi2-dual-imx219-dtbs := k3-am68-sk-base-board.dtb \
k3-j721e-sk-csi2-dual-imx219.dtbo
k3-am69-sk-csi2-dual-imx219-dtbs := k3-am69-sk.dtb \
k3-j721e-sk-csi2-dual-imx219.dtbo
+k3-j7200-evm-pcie1-ep-dtbs := k3-j7200-common-proc-board.dtb \
+ k3-j7200-evm-pcie1-ep.dtbo
k3-j721e-evm-pcie0-ep-dtbs := k3-j721e-common-proc-board.dtb \
k3-j721e-evm-pcie0-ep.dtbo
k3-j721e-sk-csi2-dual-imx219-dtbs := k3-j721e-sk.dtb \
@@ -163,6 +166,7 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
k3-am642-tqma64xxl-mbax4xxl-wlan.dtb \
k3-am68-sk-base-board-csi2-dual-imx219-dtbs \
k3-am69-sk-csi2-dual-imx219-dtbs \
+ k3-j7200-evm-pcie1-ep.dtbo \
k3-j721e-evm-pcie0-ep.dtb \
k3-j721e-sk-csi2-dual-imx219-dtbs \
k3-j721s2-evm-pcie1-ep.dtb
@@ -178,6 +182,7 @@ DTC_FLAGS_k3-am642-tqma64xxl-mbax4xxl += -@
DTC_FLAGS_k3-am6548-iot2050-advanced-m2 += -@
DTC_FLAGS_k3-am68-sk-base-board += -@
DTC_FLAGS_k3-am69-sk += -@
+DTC_FLAGS_k3-j7200-common-proc-board += -@
DTC_FLAGS_k3-j721e-common-proc-board += -@
DTC_FLAGS_k3-j721e-sk += -@
DTC_FLAGS_k3-j721s2-common-proc-board += -@
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-evm-pcie1-ep.dtso b/arch/arm64/boot/dts/ti/k3-j7200-evm-pcie1-ep.dtso
new file mode 100644
index 000000000000..ee30b10d1a75
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j7200-evm-pcie1-ep.dtso
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * DT Overlay for enabling PCIE1 instance in Endpoint Configuration with the
+ * J7 common processor board.
+ *
+ * J7 Common Processor Board Product Link: https://www.ti.com/tool/J721EXCPXEVM
+ *
+ * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+#include "k3-pinctrl.h"
+
+/*
+ * Since Root Complex and Endpoint modes are mutually exclusive
+ * disable Root Complex mode.
+ */
+&pcie1_rc {
+ status = "disabled";
+};
+
+&cbass_main {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&gic500>;
+
+ pcie1_ep: pcie-ep@2910000 {
+ compatible = "ti,j7200-pcie-ep", "ti,j721e-pcie-ep";
+ reg = <0x00 0x02910000 0x00 0x1000>,
+ <0x00 0x02917000 0x00 0x400>,
+ <0x00 0x0d800000 0x00 0x00800000>,
+ <0x00 0x18000000 0x00 0x08000000>;
+ reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+ interrupt-names = "link_state";
+ interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+ ti,syscon-pcie-ctrl = <&scm_conf 0x4074>;
+ max-link-speed = <3>;
+ num-lanes = <2>;
+ power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 240 6>;
+ clock-names = "fck";
+ max-functions = /bits/ 8 <6>;
+ max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
+ dma-coherent;
+ phys = <&serdes0_pcie_link>;
+ phy-names = "pcie-phy";
+ };
+};
--
2.34.1