2024-03-06 10:34:47

by Manivannan Sadhasivam

[permalink] [raw]
Subject: [PATCH v4 0/5] PCI: dwc: Add support for integrating HDMA with DWC EP driver

Hello,

This series adds support for integrating HDMA with the DWC EP driver.

Hyper DMA (HDMA) is already supported by the dw-edma dmaengine driver.
Unlike it's predecessor Embedded DMA (eDMA), HDMA supports only unroll
mapping format and doesn't support auto detecting the read/write channels.

Hence, this series modifies the existing eDMA code to work with HDMA by
honoring the platform supplied mapping format and read/write channels
count.

The platform drivers making use of HDMA should pass the EDMA_MF_HDMA_NATIVE
flag and provide channels count. In this series, HDMA support is added for
the Qcom SA8775P SoC and the DMA support in enabled in MHI EPF driver as
well.

Testing
-------

Tested on Qualcomm SA8775P Ride board.

Dependency
----------

Depends on:
https://lore.kernel.org/dmaengine/[email protected]/
https://lore.kernel.org/all/[email protected]/

NOTE: I've taken over this series from Mrinmay who posted v1:
https://lore.kernel.org/linux-pci/[email protected]/

- Mani

Changes in v4:

- Rolled back the code refactoring done in v2 for patch 1 (Sergey)
- Reworked the channels count auto detection (Sergey)
- Collected tags
- Link to v3: https://lore.kernel.org/r/[email protected]

Changes in v3:

- Collected review tags
- Minor code refactoring (Siddharth)
- Link to v2: https://lore.kernel.org/r/[email protected]

Changes in v2:

- Dropped dmaengine patches (Sergey)
- Reworked dw_pcie_edma_find_chip() to support both eDMA and HDMA (Sergey)
- Skipped MF and channel detection if glue drivers have provided them (Sergey)
- Addressed review comments in pcie-qcom-ep and pci-epf-mhi drivers (Mani)

Signed-off-by: Manivannan Sadhasivam <[email protected]>
---
Manivannan Sadhasivam (3):
PCI: dwc: Refactor dw_pcie_edma_find_chip() API
PCI: dwc: Skip finding eDMA channels count for HDMA platforms
PCI: dwc: Pass the eDMA mapping format flag directly from glue drivers

Mrinmay Sarkar (2):
PCI: qcom-ep: Add HDMA support for SA8775P SoC
PCI: epf-mhi: Enable HDMA for SA8775P SoC

drivers/pci/controller/dwc/pcie-designware.c | 65 +++++++++++++++++++++-------
drivers/pci/controller/dwc/pcie-designware.h | 5 +--
drivers/pci/controller/dwc/pcie-qcom-ep.c | 23 +++++++++-
drivers/pci/controller/dwc/pcie-rcar-gen4.c | 2 +-
drivers/pci/endpoint/functions/pci-epf-mhi.c | 1 +
5 files changed, 75 insertions(+), 21 deletions(-)
---
base-commit: fdd10aee7740a53c370a867b8743a8c8945d1db1
change-id: 20240216-dw-hdma-64ddc09fb30b

Best regards,
--
Manivannan Sadhasivam <[email protected]>



2024-03-06 10:55:18

by Manivannan Sadhasivam

[permalink] [raw]
Subject: [PATCH v4 5/5] PCI: epf-mhi: Enable HDMA for SA8775P SoC

From: Mrinmay Sarkar <[email protected]>

SA8775P SoC supports Hyper DMA (HDMA) DMA Engine present in the DWC IP. So,
let's enable it in the EPF driver so that the DMA Engine APIs can be used
for data transfer.

Signed-off-by: Mrinmay Sarkar <[email protected]>
[mani: reworded commit message]
Reviewed-by: Siddharth Vadapalli <[email protected]>
Reviewed-by: Frank Li <[email protected]>
Signed-off-by: Manivannan Sadhasivam <[email protected]>
---
drivers/pci/endpoint/functions/pci-epf-mhi.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/pci/endpoint/functions/pci-epf-mhi.c b/drivers/pci/endpoint/functions/pci-epf-mhi.c
index 2c54d80107cf..570c1d1fb12e 100644
--- a/drivers/pci/endpoint/functions/pci-epf-mhi.c
+++ b/drivers/pci/endpoint/functions/pci-epf-mhi.c
@@ -137,6 +137,7 @@ static const struct pci_epf_mhi_ep_info sa8775p_info = {
.epf_flags = PCI_BASE_ADDRESS_MEM_TYPE_32,
.msi_count = 32,
.mru = 0x8000,
+ .flags = MHI_EPF_USE_DMA,
};

struct pci_epf_mhi {

--
2.25.1


2024-03-06 10:59:32

by Manivannan Sadhasivam

[permalink] [raw]
Subject: [PATCH v4 4/5] PCI: qcom-ep: Add HDMA support for SA8775P SoC

From: Mrinmay Sarkar <[email protected]>

SA8775P SoC supports the new Hyper DMA (HDMA) DMA Engine inside the DWC IP.
Let's add support for it by passing the mapping format and the number of
read/write channels count.

The PCIe EP controller used on this SoC is of version 1.34.0, so a separate
config struct is introduced for the sake of enabling HDMA conditionally.

It should be noted that for the eDMA support (predecessor of HDMA), there
are no mapping format and channels count specified. That is because eDMA
supports auto detection of both parameters, whereas HDMA doesn't.

Signed-off-by: Mrinmay Sarkar <[email protected]>
[mani: Reworded commit message, added kdoc, and minor cleanups]
Reviewed-by: Siddharth Vadapalli <[email protected]>
Reviewed-by: Frank Li <[email protected]>
Signed-off-by: Manivannan Sadhasivam <[email protected]>
---
drivers/pci/controller/dwc/pcie-qcom-ep.c | 23 ++++++++++++++++++++++-
1 file changed, 22 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom-ep.c b/drivers/pci/controller/dwc/pcie-qcom-ep.c
index 45008e054e31..89d06a3e6e06 100644
--- a/drivers/pci/controller/dwc/pcie-qcom-ep.c
+++ b/drivers/pci/controller/dwc/pcie-qcom-ep.c
@@ -149,6 +149,14 @@ enum qcom_pcie_ep_link_status {
QCOM_PCIE_EP_LINK_DOWN,
};

+/**
+ * struct qcom_pcie_ep_cfg - Per SoC config struct
+ * @hdma_support: HDMA support on this SoC
+ */
+struct qcom_pcie_ep_cfg {
+ bool hdma_support;
+};
+
/**
* struct qcom_pcie_ep - Qualcomm PCIe Endpoint Controller
* @pci: Designware PCIe controller struct
@@ -803,6 +811,7 @@ static const struct dw_pcie_ep_ops pci_ep_ops = {

static int qcom_pcie_ep_probe(struct platform_device *pdev)
{
+ const struct qcom_pcie_ep_cfg *cfg;
struct device *dev = &pdev->dev;
struct qcom_pcie_ep *pcie_ep;
char *name;
@@ -816,6 +825,14 @@ static int qcom_pcie_ep_probe(struct platform_device *pdev)
pcie_ep->pci.ops = &pci_ops;
pcie_ep->pci.ep.ops = &pci_ep_ops;
pcie_ep->pci.edma.nr_irqs = 1;
+
+ cfg = of_device_get_match_data(dev);
+ if (cfg && cfg->hdma_support) {
+ pcie_ep->pci.edma.ll_wr_cnt = 8;
+ pcie_ep->pci.edma.ll_rd_cnt = 8;
+ pcie_ep->pci.edma.mf = EDMA_MF_HDMA_NATIVE;
+ }
+
platform_set_drvdata(pdev, pcie_ep);

ret = qcom_pcie_ep_get_resources(pdev, pcie_ep);
@@ -874,8 +891,12 @@ static void qcom_pcie_ep_remove(struct platform_device *pdev)
qcom_pcie_disable_resources(pcie_ep);
}

+static const struct qcom_pcie_ep_cfg cfg_1_34_0 = {
+ .hdma_support = true,
+};
+
static const struct of_device_id qcom_pcie_ep_match[] = {
- { .compatible = "qcom,sa8775p-pcie-ep", },
+ { .compatible = "qcom,sa8775p-pcie-ep", .data = &cfg_1_34_0},
{ .compatible = "qcom,sdx55-pcie-ep", },
{ .compatible = "qcom,sm8450-pcie-ep", },
{ }

--
2.25.1