There are some bugfix for the HNS3 ethernet driver
Hao Lan (2):
net: hns3: add new 200G link modes for hisilicon device
net: hns3: Disable SerDes serial loopback for HiLink H60
Jian Shen (1):
net: hns3: add checking for vf id of mailbox
Jie Wang (1):
net: hns3: fix port duplex configure error in IMP reset
Jijie Shao (2):
net: hns3: fix wrong judgment condition issue
net: hns3: fix delete tc fail issue
Peiyang Wang (1):
net: hns3: fix reset timeout under full functions and queues
Yonglong Liu (1):
net: hns3: fix kernel crash when 1588 is received on HIP08 devices
drivers/net/ethernet/hisilicon/hns3/hnae3.h | 2 +
.../hns3/hns3_common/hclge_comm_cmd.c | 2 +-
.../hns3/hns3_common/hclge_comm_cmd.h | 2 +-
.../net/ethernet/hisilicon/hns3/hns3_dcbnl.c | 2 +-
.../ethernet/hisilicon/hns3/hns3_debugfs.c | 2 +
.../hisilicon/hns3/hns3pf/hclge_cmd.h | 3 +-
.../hisilicon/hns3/hns3pf/hclge_dcb.c | 2 +
.../hisilicon/hns3/hns3pf/hclge_main.c | 44 +++++++++++++------
.../hisilicon/hns3/hns3pf/hclge_main.h | 11 ++++-
.../hisilicon/hns3/hns3pf/hclge_mbx.c | 7 +--
.../hisilicon/hns3/hns3pf/hclge_ptp.c | 2 +-
.../ethernet/hisilicon/hns3/hns3pf/hclge_tm.c | 16 +++++++
.../ethernet/hisilicon/hns3/hns3pf/hclge_tm.h | 1 +
13 files changed, 74 insertions(+), 22 deletions(-)
--
2.30.0
From: Hao Lan <[email protected]>
When the hilink version is H60, the serdes serial loopback test is not
supported. This patch add hilink version detection. When the version
is H60, the serdes serial loopback test will be disable.
Signed-off-by: Hao Lan <[email protected]>
Signed-off-by: Jijie Shao <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hnae3.h | 1 +
drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c | 2 ++
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 3 ++-
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 9 +++++++--
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 6 ++++++
5 files changed, 18 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
index d7e175a9cb49..a72caaf05475 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
@@ -388,6 +388,7 @@ struct hnae3_dev_specs {
u16 mc_mac_size;
u32 mac_stats_num;
u8 tnl_num;
+ u8 hilink_version;
};
struct hnae3_client_ops {
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c b/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c
index c083d1d10767..807eb3bbb11c 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c
@@ -1097,6 +1097,8 @@ hns3_dbg_dev_specs(struct hnae3_handle *h, char *buf, int len, int *pos)
*pos += scnprintf(buf + *pos, len - *pos,
"TX timeout threshold: %d seconds\n",
dev->watchdog_timeo / HZ);
+ *pos += scnprintf(buf + *pos, len - *pos, "Hilink Version: %u\n",
+ dev_specs->hilink_version);
}
static int hns3_dbg_dev_info(struct hnae3_handle *h, char *buf, int len)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
index 4d15eb73b972..9bb708fa42f2 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
@@ -828,7 +828,8 @@ struct hclge_dev_specs_1_cmd {
__le16 mc_mac_size;
u8 rsv1[6];
u8 tnl_num;
- u8 rsv2[5];
+ u8 hilink_version;
+ u8 rsv2[4];
};
/* mac speed type defined in firmware command */
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 21f3e2bf5ef8..16860eea9800 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -645,8 +645,12 @@ static int hclge_get_sset_count(struct hnae3_handle *handle, int stringset)
handle->flags |= HNAE3_SUPPORT_APP_LOOPBACK;
}
- count += 1;
- handle->flags |= HNAE3_SUPPORT_SERDES_SERIAL_LOOPBACK;
+ if (hdev->ae_dev->dev_specs.hilink_version !=
+ HCLGE_HILINK_H60) {
+ count += 1;
+ handle->flags |= HNAE3_SUPPORT_SERDES_SERIAL_LOOPBACK;
+ }
+
count += 1;
handle->flags |= HNAE3_SUPPORT_SERDES_PARALLEL_LOOPBACK;
count += 1;
@@ -1358,6 +1362,7 @@ static void hclge_parse_dev_specs(struct hclge_dev *hdev,
ae_dev->dev_specs.umv_size = le16_to_cpu(req1->umv_size);
ae_dev->dev_specs.mc_mac_size = le16_to_cpu(req1->mc_mac_size);
ae_dev->dev_specs.tnl_num = req1->tnl_num;
+ ae_dev->dev_specs.hilink_version = req1->hilink_version;
}
static void hclge_check_dev_specs(struct hclge_dev *hdev)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
index a2877b64e085..e821dd2f1528 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
@@ -256,6 +256,12 @@ enum HCLGE_MAC_DUPLEX {
HCLGE_MAC_FULL
};
+/* hilink version */
+enum hclge_hilink_version {
+ HCLGE_HILINK_H32 = 0,
+ HCLGE_HILINK_H60 = 1,
+};
+
#define QUERY_SFP_SPEED 0
#define QUERY_ACTIVE_SPEED 1
--
2.30.0
From: Hao Lan <[email protected]>
The hisilicon device now supports a new 200G link interface,
which query from firmware in a new bit. Therefore,
the HCLGE_SUPPORT_200G_R4_BIT capability bit has been added.
The HCLGE_SUPPORT_200G_BIT has been renamed as
HCLGE_SUPPORT_200G_R4_EXT_BIT, and the firmware has
extended support for this mode.
Fixes: ae6f010cb1a7 ("net: hns3: add support for 200G device")
Signed-off-by: Hao Lan <[email protected]>
Signed-off-by: Jijie Shao <[email protected]>
---
.../hisilicon/hns3/hns3pf/hclge_main.c | 28 ++++++++++++-------
.../hisilicon/hns3/hns3pf/hclge_main.h | 5 +++-
2 files changed, 22 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 5ea9e59569ef..21f3e2bf5ef8 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -884,7 +884,7 @@ static const struct hclge_speed_bit_map speed_bit_map[] = {
{HCLGE_MAC_SPEED_40G, HCLGE_SUPPORT_40G_BIT},
{HCLGE_MAC_SPEED_50G, HCLGE_SUPPORT_50G_BITS},
{HCLGE_MAC_SPEED_100G, HCLGE_SUPPORT_100G_BITS},
- {HCLGE_MAC_SPEED_200G, HCLGE_SUPPORT_200G_BIT},
+ {HCLGE_MAC_SPEED_200G, HCLGE_SUPPORT_200G_BITS},
};
static int hclge_get_speed_bit(u32 speed, u32 *speed_bit)
@@ -940,7 +940,7 @@ static void hclge_update_fec_support(struct hclge_mac *mac)
mac->supported);
}
-static const struct hclge_link_mode_bmap hclge_sr_link_mode_bmap[8] = {
+static const struct hclge_link_mode_bmap hclge_sr_link_mode_bmap[] = {
{HCLGE_SUPPORT_10G_BIT, ETHTOOL_LINK_MODE_10000baseSR_Full_BIT},
{HCLGE_SUPPORT_25G_BIT, ETHTOOL_LINK_MODE_25000baseSR_Full_BIT},
{HCLGE_SUPPORT_40G_BIT, ETHTOOL_LINK_MODE_40000baseSR4_Full_BIT},
@@ -948,10 +948,12 @@ static const struct hclge_link_mode_bmap hclge_sr_link_mode_bmap[8] = {
{HCLGE_SUPPORT_50G_R1_BIT, ETHTOOL_LINK_MODE_50000baseSR_Full_BIT},
{HCLGE_SUPPORT_100G_R4_BIT, ETHTOOL_LINK_MODE_100000baseSR4_Full_BIT},
{HCLGE_SUPPORT_100G_R2_BIT, ETHTOOL_LINK_MODE_100000baseSR2_Full_BIT},
- {HCLGE_SUPPORT_200G_BIT, ETHTOOL_LINK_MODE_200000baseSR4_Full_BIT},
+ {HCLGE_SUPPORT_200G_R4_EXT_BIT,
+ ETHTOOL_LINK_MODE_200000baseSR4_Full_BIT},
+ {HCLGE_SUPPORT_200G_R4_BIT, ETHTOOL_LINK_MODE_200000baseSR4_Full_BIT},
};
-static const struct hclge_link_mode_bmap hclge_lr_link_mode_bmap[6] = {
+static const struct hclge_link_mode_bmap hclge_lr_link_mode_bmap[] = {
{HCLGE_SUPPORT_10G_BIT, ETHTOOL_LINK_MODE_10000baseLR_Full_BIT},
{HCLGE_SUPPORT_40G_BIT, ETHTOOL_LINK_MODE_40000baseLR4_Full_BIT},
{HCLGE_SUPPORT_50G_R1_BIT, ETHTOOL_LINK_MODE_50000baseLR_ER_FR_Full_BIT},
@@ -959,11 +961,13 @@ static const struct hclge_link_mode_bmap hclge_lr_link_mode_bmap[6] = {
ETHTOOL_LINK_MODE_100000baseLR4_ER4_Full_BIT},
{HCLGE_SUPPORT_100G_R2_BIT,
ETHTOOL_LINK_MODE_100000baseLR2_ER2_FR2_Full_BIT},
- {HCLGE_SUPPORT_200G_BIT,
+ {HCLGE_SUPPORT_200G_R4_EXT_BIT,
+ ETHTOOL_LINK_MODE_200000baseLR4_ER4_FR4_Full_BIT},
+ {HCLGE_SUPPORT_200G_R4_BIT,
ETHTOOL_LINK_MODE_200000baseLR4_ER4_FR4_Full_BIT},
};
-static const struct hclge_link_mode_bmap hclge_cr_link_mode_bmap[8] = {
+static const struct hclge_link_mode_bmap hclge_cr_link_mode_bmap[] = {
{HCLGE_SUPPORT_10G_BIT, ETHTOOL_LINK_MODE_10000baseCR_Full_BIT},
{HCLGE_SUPPORT_25G_BIT, ETHTOOL_LINK_MODE_25000baseCR_Full_BIT},
{HCLGE_SUPPORT_40G_BIT, ETHTOOL_LINK_MODE_40000baseCR4_Full_BIT},
@@ -971,10 +975,12 @@ static const struct hclge_link_mode_bmap hclge_cr_link_mode_bmap[8] = {
{HCLGE_SUPPORT_50G_R1_BIT, ETHTOOL_LINK_MODE_50000baseCR_Full_BIT},
{HCLGE_SUPPORT_100G_R4_BIT, ETHTOOL_LINK_MODE_100000baseCR4_Full_BIT},
{HCLGE_SUPPORT_100G_R2_BIT, ETHTOOL_LINK_MODE_100000baseCR2_Full_BIT},
- {HCLGE_SUPPORT_200G_BIT, ETHTOOL_LINK_MODE_200000baseCR4_Full_BIT},
+ {HCLGE_SUPPORT_200G_R4_EXT_BIT,
+ ETHTOOL_LINK_MODE_200000baseCR4_Full_BIT},
+ {HCLGE_SUPPORT_200G_R4_BIT, ETHTOOL_LINK_MODE_200000baseCR4_Full_BIT},
};
-static const struct hclge_link_mode_bmap hclge_kr_link_mode_bmap[9] = {
+static const struct hclge_link_mode_bmap hclge_kr_link_mode_bmap[] = {
{HCLGE_SUPPORT_1G_BIT, ETHTOOL_LINK_MODE_1000baseKX_Full_BIT},
{HCLGE_SUPPORT_10G_BIT, ETHTOOL_LINK_MODE_10000baseKR_Full_BIT},
{HCLGE_SUPPORT_25G_BIT, ETHTOOL_LINK_MODE_25000baseKR_Full_BIT},
@@ -983,7 +989,9 @@ static const struct hclge_link_mode_bmap hclge_kr_link_mode_bmap[9] = {
{HCLGE_SUPPORT_50G_R1_BIT, ETHTOOL_LINK_MODE_50000baseKR_Full_BIT},
{HCLGE_SUPPORT_100G_R4_BIT, ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT},
{HCLGE_SUPPORT_100G_R2_BIT, ETHTOOL_LINK_MODE_100000baseKR2_Full_BIT},
- {HCLGE_SUPPORT_200G_BIT, ETHTOOL_LINK_MODE_200000baseKR4_Full_BIT},
+ {HCLGE_SUPPORT_200G_R4_EXT_BIT,
+ ETHTOOL_LINK_MODE_200000baseKR4_Full_BIT},
+ {HCLGE_SUPPORT_200G_R4_BIT, ETHTOOL_LINK_MODE_200000baseKR4_Full_BIT},
};
static void hclge_convert_setting_sr(u16 speed_ability,
@@ -1154,7 +1162,7 @@ static void hclge_parse_link_mode(struct hclge_dev *hdev, u16 speed_ability)
static u32 hclge_get_max_speed(u16 speed_ability)
{
- if (speed_ability & HCLGE_SUPPORT_200G_BIT)
+ if (speed_ability & HCLGE_SUPPORT_200G_BITS)
return HCLGE_MAC_SPEED_200G;
if (speed_ability & HCLGE_SUPPORT_100G_BITS)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
index 51979cf71262..a2877b64e085 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
@@ -191,9 +191,10 @@ enum HLCGE_PORT_TYPE {
#define HCLGE_SUPPORT_40G_BIT BIT(5)
#define HCLGE_SUPPORT_100M_BIT BIT(6)
#define HCLGE_SUPPORT_10M_BIT BIT(7)
-#define HCLGE_SUPPORT_200G_BIT BIT(8)
+#define HCLGE_SUPPORT_200G_R4_EXT_BIT BIT(8)
#define HCLGE_SUPPORT_50G_R1_BIT BIT(9)
#define HCLGE_SUPPORT_100G_R2_BIT BIT(10)
+#define HCLGE_SUPPORT_200G_R4_BIT BIT(11)
#define HCLGE_SUPPORT_GE \
(HCLGE_SUPPORT_1G_BIT | HCLGE_SUPPORT_100M_BIT | HCLGE_SUPPORT_10M_BIT)
@@ -201,6 +202,8 @@ enum HLCGE_PORT_TYPE {
(HCLGE_SUPPORT_50G_R2_BIT | HCLGE_SUPPORT_50G_R1_BIT)
#define HCLGE_SUPPORT_100G_BITS \
(HCLGE_SUPPORT_100G_R4_BIT | HCLGE_SUPPORT_100G_R2_BIT)
+#define HCLGE_SUPPORT_200G_BITS \
+ (HCLGE_SUPPORT_200G_R4_EXT_BIT | HCLGE_SUPPORT_200G_R4_BIT)
enum HCLGE_DEV_STATE {
HCLGE_STATE_REINITING,
--
2.30.0
From: Jie Wang <[email protected]>
Currently, the mac port is fixed to configured as full dplex mode in
hclge_mac_init() when driver initialization or reset restore. Users may
change the mode to half duplex with ethtool, so it may cause the user
configuration dropped after reset.
To fix it, don't change the duplex mode when resetting.
Fixes: 2d03eacc0b7e ("net: hns3: Only update mac configuation when necessary")
Signed-off-by: Jie Wang <[email protected]>
Signed-off-by: Jijie Shao <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 349e4a1946ab..b4afb66efe5c 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -2903,7 +2903,10 @@ static int hclge_mac_init(struct hclge_dev *hdev)
int ret;
hdev->support_sfp_query = true;
- hdev->hw.mac.duplex = HCLGE_MAC_FULL;
+
+ if (!test_bit(HCLGE_STATE_RST_HANDLING, &hdev->state))
+ hdev->hw.mac.duplex = HCLGE_MAC_FULL;
+
ret = hclge_cfg_mac_speed_dup_hw(hdev, hdev->hw.mac.speed,
hdev->hw.mac.duplex, hdev->hw.mac.lane_num);
if (ret)
--
2.30.0
When the tc is removed during reset, hns3 driver will return a errcode.
But kernel ignores this errcode, As a result,
the driver status is inconsistent with the kernel status.
This patch retains the deletion status when the deletion fails
and continues to delete after the reset to ensure that
the status of the driver is consistent with that of kernel.
Signed-off-by: Jijie Shao <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hnae3.h | 1 +
.../ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c | 2 ++
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 2 ++
.../ethernet/hisilicon/hns3/hns3pf/hclge_tm.c | 16 ++++++++++++++++
.../ethernet/hisilicon/hns3/hns3pf/hclge_tm.h | 1 +
5 files changed, 22 insertions(+)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
index a72caaf05475..f19f1e1d1f9f 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
@@ -820,6 +820,7 @@ struct hnae3_tc_info {
u8 max_tc; /* Total number of TCs */
u8 num_tc; /* Total number of enabled TCs */
bool mqprio_active;
+ bool mqprio_destroy;
bool dcb_ets_active;
};
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c
index b98301e205f7..eabbacb1c714 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c
@@ -619,6 +619,8 @@ static int hclge_setup_tc(struct hnae3_handle *h,
return ret;
}
+ kinfo->tc_info.mqprio_destroy = !tc;
+
ret = hclge_notify_down_uinit(hdev);
if (ret)
return ret;
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 16860eea9800..349e4a1946ab 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -12105,6 +12105,8 @@ static int hclge_reset_ae_dev(struct hnae3_ae_dev *ae_dev)
return ret;
}
+ hclge_reset_tc_config(hdev);
+
ret = hclge_tm_init_hw(hdev, true);
if (ret) {
dev_err(&pdev->dev, "tm init hw fail, ret =%d\n", ret);
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
index c58c31221762..00c3f2548bf6 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
@@ -2143,3 +2143,19 @@ int hclge_tm_flush_cfg(struct hclge_dev *hdev, bool enable)
return ret;
}
+
+void hclge_reset_tc_config(struct hclge_dev *hdev)
+{
+ struct hclge_vport *vport = &hdev->vport[0];
+ struct hnae3_knic_private_info *kinfo;
+
+ kinfo = &vport->nic.kinfo;
+
+ if (!kinfo->tc_info.mqprio_destroy)
+ return;
+
+ /* clear tc info, including mqprio_destroy and mqprio_active */
+ memset(&kinfo->tc_info, 0, sizeof(kinfo->tc_info));
+ hclge_tm_schd_info_update(hdev, 0);
+ hclge_comm_rss_indir_init_cfg(hdev->ae_dev, &hdev->rss_cfg);
+}
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h
index 53eec6df5194..0985916629d3 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h
@@ -277,4 +277,5 @@ int hclge_tm_get_port_shaper(struct hclge_dev *hdev,
int hclge_up_to_tc_map(struct hclge_dev *hdev);
int hclge_dscp_to_tc_map(struct hclge_dev *hdev);
int hclge_tm_flush_cfg(struct hclge_dev *hdev, bool enable);
+void hclge_reset_tc_config(struct hclge_dev *hdev);
#endif
--
2.30.0
Hello:
This series was applied to netdev/net-next.git (main)
by David S. Miller <[email protected]>:
On Thu, 7 Mar 2024 09:01:07 +0800 you wrote:
> There are some bugfix for the HNS3 ethernet driver
>
> Hao Lan (2):
> net: hns3: add new 200G link modes for hisilicon device
> net: hns3: Disable SerDes serial loopback for HiLink H60
>
> Jian Shen (1):
> net: hns3: add checking for vf id of mailbox
>
> [...]
Here is the summary with links:
- [net,1/8] net: hns3: fix wrong judgment condition issue
https://git.kernel.org/netdev/net-next/c/07a1d6dc90ba
- [net,2/8] net: hns3: add new 200G link modes for hisilicon device
https://git.kernel.org/netdev/net-next/c/dd1f65f0db27
- [net,3/8] net: hns3: Disable SerDes serial loopback for HiLink H60
https://git.kernel.org/netdev/net-next/c/0448825b8992
- [net,4/8] net: hns3: fix kernel crash when 1588 is received on HIP08 devices
https://git.kernel.org/netdev/net-next/c/0fbcf2366ba9
- [net,5/8] net: hns3: fix delete tc fail issue
https://git.kernel.org/netdev/net-next/c/03f92287b251
- [net,6/8] net: hns3: fix reset timeout under full functions and queues
https://git.kernel.org/netdev/net-next/c/216bc415d663
- [net,7/8] net: hns3: fix port duplex configure error in IMP reset
https://git.kernel.org/netdev/net-next/c/11d80f79dd9f
- [net,8/8] net: hns3: add checking for vf id of mailbox
https://git.kernel.org/netdev/net-next/c/4e2969a0d6a7
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html