Drop the Quadrature convention in the signal name. On stm32-timer:
- Quadrature A signal corresponds to timer input ch1, hence "Channel 1"
- Quadrature B signal corresponds to timer input ch2, hence "Channel 2".
So name these signals after their channel. I suspect it referred to the
(unique) quadrature counter support earlier, but the physical input
really is CH1/CH2. This will be easier to support other counter modes.
Reviewed-by: William Breathitt Gray <[email protected]>
Signed-off-by: Fabrice Gasnier <[email protected]>
---
Changes in v4:
- Add William's Reviewed-by tag
Changes in v2:
- Drop the "Quadrature" convention from the signal name, as suggested by
William
---
drivers/counter/stm32-timer-cnt.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/counter/stm32-timer-cnt.c b/drivers/counter/stm32-timer-cnt.c
index 6206d2dc3d47..36d812ddf162 100644
--- a/drivers/counter/stm32-timer-cnt.c
+++ b/drivers/counter/stm32-timer-cnt.c
@@ -279,11 +279,11 @@ static const struct counter_ops stm32_timer_cnt_ops = {
static struct counter_signal stm32_signals[] = {
{
.id = 0,
- .name = "Channel 1 Quadrature A"
+ .name = "Channel 1"
},
{
.id = 1,
- .name = "Channel 1 Quadrature B"
+ .name = "Channel 2"
}
};
--
2.25.1