The pinctrl nodes are coming from the shared gs101-pinctrl.dtsi,
thus the pinctrl-0/names shall stay in dtsi. Move them.
Signed-off-by: Tudor Ambarus <[email protected]>
---
arch/arm64/boot/dts/exynos/google/gs101-oriole.dts | 2 --
arch/arm64/boot/dts/exynos/google/gs101.dtsi | 2 ++
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
index 6ccade2c8cb4..9dc0f47ef646 100644
--- a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
+++ b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
@@ -103,8 +103,6 @@ key_power: key-power-pins {
};
&serial_0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_bus>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
index 55e6bcb3689e..ee65ed9d2cfc 100644
--- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi
+++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
@@ -421,6 +421,8 @@ serial_0: serial@10a00000 {
reg = <0x10a00000 0xc0>;
interrupts = <GIC_SPI 634
IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_bus>;
clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_0>,
<&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_0>;
clock-names = "uart", "clk_uart_baud0";
--
2.44.0.278.ge034bb2e1d-goog