The TCUs (Translation Control Units) and TBUs (Translation Buffer
Units) are key components of the MMU-500. Multiple TBUs are connected
to a single TCU over an interconnect. Each TBU contains a TLB that
caches page tables. The MMU-500 implements a TBU for each connected
master, and the TBU is designed, so that it is local to the master.
A common TBU DT schema is added to describe the TBUs.
The Qualcomm SDM845 and SC7280 platforms have an implementation of the
SMMU-500, that has multiple TBUs. A vendor-specific DT schema is added
to describe the resources for each TBU (register space, power-domains,
interconnects and clocks).
The TBU driver will manage the resources and allow the system to
operate the TBUs during a context fault to obtain details by doing
s1 inv, software + hardware page table walks etc. This is implemented
with ATOS/eCATs as the ATS feature is not supported. Being able to
query the TBUs is useful for debugging various hardware/software
issues on these platforms.
v6:
- Use SoC-specific compatibles (Krzysztof)
- Use additionalProperties: false (Krzysztof)
- Wrap description text to 80 cols (Krzysztof)
v5: https://lore.kernel.org/r/[email protected]
- Drop the common TBU bindings and child nodes. These TBU functionalities
are only Qualcomm specific and not generic. In the unmodified ARM MMU-500
implementation there are no TBU-specific resources, so just make them
standalone DT nodes. (Robin)
- The "qcom,stream-id-range" DT property now takes a phandle to the smmu
and a stream ID range.
v4: https://lore.kernel.org/r/[email protected]/
- Create a common TBU schema. Move the vendor-specific properties into
a separate schema that references the common one. (Rob)
- Drop unused DT labels in example, fix regex. (Rob)
- Properly rebase on latest code.
v3: https://lore.kernel.org/r/[email protected]
- Having a TBU is not Qualcomm specific, so allow having TBU child
nodes with no specific constraints on properties. For some of the
vendor compatibles however, add a schema to describe specific
properties and allow validation. (Rob)
- Drop the useless reg-names DT property on TBUs. (Rob)
- Make the stream-id-range DT property a common one. (Rob)
- Fix the DT example. (Rob)
- Minor fixes on the TBU driver.
- Add support for SC7280 platforms.
v2: https://lore.kernel.org/r/[email protected]
- Improve DT binding description, add full example. (Konrad)
- Drop Qcom specific stuff from the generic binding. (Rob)
- Unconditionally try to populate subnodes. (Konrad)
- Improve TBU driver commit text, remove memory barriers. (Bjorn)
- Move TBU stuff into separate file. Make the driver builtin.
- TODO: Evaluate whether to keep TBU support as a separate driver
or just instantiate things from qcom_smmu_impl_init()
v1: https://lore.kernel.org/r/[email protected]
Georgi Djakov (7):
dt-bindings: iommu: Add Qualcomm TBU
iommu/arm-smmu-qcom-tbu: Add Qualcomm TBU driver
iommu/arm-smmu: Allow using a threaded handler for context interrupts
iommu/arm-smmu-qcom: Use a custom context fault handler for sdm845
arm64: dts: qcom: sdm845: Add DT nodes for the TBUs
iommu/arm-smmu-qcom: Use the custom fault handler on more platforms
arm64: dts: qcom: sc7280: Add DT nodes for the TBUs
.../devicetree/bindings/iommu/qcom,tbu.yaml | 69 +++
arch/arm64/boot/dts/qcom/sc7280.dtsi | 89 ++++
arch/arm64/boot/dts/qcom/sdm845.dtsi | 70 +++
drivers/iommu/Kconfig | 9 +
drivers/iommu/arm/arm-smmu/Makefile | 1 +
.../iommu/arm/arm-smmu/arm-smmu-qcom-tbu.c | 496 ++++++++++++++++++
drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 8 +
drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h | 2 +
drivers/iommu/arm/arm-smmu/arm-smmu.c | 12 +-
drivers/iommu/arm/arm-smmu/arm-smmu.h | 3 +
10 files changed, 757 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/iommu/qcom,tbu.yaml
create mode 100644 drivers/iommu/arm/arm-smmu/arm-smmu-qcom-tbu.c
The "apps_smmu" on the Qualcomm sdm845 platform is an implementation
of the SMMU-500, that consists of a single TCU (Translation Control
Unit) and multiple TBUs (Translation Buffer Units). These TBUs have
hardware debugging features that are specific and only present on
Qualcomm hardware. Represent them as independent DT nodes. List all
the resources that are needed to operate them (such as registers,
clocks, power domains and interconnects).
Signed-off-by: Georgi Djakov <[email protected]>
---
.../devicetree/bindings/iommu/qcom,tbu.yaml | 69 +++++++++++++++++++
1 file changed, 69 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iommu/qcom,tbu.yaml
diff --git a/Documentation/devicetree/bindings/iommu/qcom,tbu.yaml b/Documentation/devicetree/bindings/iommu/qcom,tbu.yaml
new file mode 100644
index 000000000000..82dfe935573e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/qcom,tbu.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/qcom,tbu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm TBU (Translation Buffer Unit)
+
+maintainers:
+ - Georgi Djakov <[email protected]>
+
+description:
+ The Qualcomm SMMU500 implementation consists of TCU and TBU. The TBU contains
+ a Translation Lookaside Buffer (TLB) that caches page tables. TBUs provides
+ debug features to trace and trigger debug transactions. There are multiple TBU
+ instances with each client core.
+
+properties:
+ compatible:
+ enum:
+ - qcom,sc7280-tbu
+ - qcom,sdm845-tbu
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ interconnects:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ qcom,stream-id-range:
+ description: |
+ Phandle of a SMMU device and Stream ID range (address and size) that
+ is assigned by the TBU
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - items:
+ - description: phandle of a smmu node
+ - description: stream id base address
+ - description: stream id size
+
+required:
+ - compatible
+ - reg
+ - qcom,stream-id-range
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+ #include <dt-bindings/interconnect/qcom,icc.h>
+ #include <dt-bindings/interconnect/qcom,sdm845.h>
+
+ tbu@150e1000 {
+ compatible = "qcom,sdm845-tbu";
+ reg = <0x150e1000 0x1000>;
+ clocks = <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+ interconnects = <&system_noc MASTER_GNOC_SNOC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_IMEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+ power-domains = <&gcc HLOS1_VOTE_AGGRE_NOC_MMU_PCIE_TBU_GDSC>;
+ qcom,stream-id-range = <&apps_smmu 0x1c00 0x400>;
+ };
+...
Threaded IRQ handlers run in a less critical context compared to normal
IRQs, so they can perform more complex and time-consuming operations
without causing significant delays in other parts of the kernel.
During a context fault, it might be needed to do more processing and
gather debug information from TBUs in the handler. These operations may
sleep, so add an option to use a threaded IRQ handler in these cases.
Signed-off-by: Georgi Djakov <[email protected]>
---
drivers/iommu/arm/arm-smmu/arm-smmu.c | 12 ++++++++++--
drivers/iommu/arm/arm-smmu/arm-smmu.h | 1 +
2 files changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu.c b/drivers/iommu/arm/arm-smmu/arm-smmu.c
index c572d877b0e1..dcf0479363c3 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu.c
@@ -806,8 +806,16 @@ static int arm_smmu_init_domain_context(struct arm_smmu_domain *smmu_domain,
else
context_fault = arm_smmu_context_fault;
- ret = devm_request_irq(smmu->dev, irq, context_fault, IRQF_SHARED,
- "arm-smmu-context-fault", smmu_domain);
+ if (smmu->impl && smmu->impl->context_fault_needs_threaded_irq)
+ ret = devm_request_threaded_irq(smmu->dev, irq, NULL,
+ context_fault,
+ IRQF_ONESHOT | IRQF_SHARED,
+ "arm-smmu-context-fault",
+ smmu_domain);
+ else
+ ret = devm_request_irq(smmu->dev, irq, context_fault, IRQF_SHARED,
+ "arm-smmu-context-fault", smmu_domain);
+
if (ret < 0) {
dev_err(smmu->dev, "failed to request context IRQ %d (%u)\n",
cfg->irptndx, irq);
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu.h b/drivers/iommu/arm/arm-smmu/arm-smmu.h
index 1670e95c4637..4765c6945c34 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu.h
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu.h
@@ -438,6 +438,7 @@ struct arm_smmu_impl {
int (*def_domain_type)(struct device *dev);
irqreturn_t (*global_fault)(int irq, void *dev);
irqreturn_t (*context_fault)(int irq, void *dev);
+ bool context_fault_needs_threaded_irq;
int (*alloc_context_bank)(struct arm_smmu_domain *smmu_domain,
struct arm_smmu_device *smmu,
struct device *dev, int start);
The sdm845 platform now supports TBUs, so let's get additional debug
info from the TBUs when a context fault occurs. Implement a custom
context fault handler that does both software + hardware page table
walks and TLB Invalidate All.
Signed-off-by: Georgi Djakov <[email protected]>
---
.../iommu/arm/arm-smmu/arm-smmu-qcom-tbu.c | 130 ++++++++++++++++++
drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 4 +
2 files changed, 134 insertions(+)
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-tbu.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-tbu.c
index 2a7c8a9cc9e6..fe0ed4822227 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-tbu.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-tbu.c
@@ -306,6 +306,136 @@ static phys_addr_t qcom_iova_to_phys(struct arm_smmu_domain *smmu_domain,
return phys;
}
+static phys_addr_t qcom_smmu_iova_to_phys_hard(struct arm_smmu_domain *smmu_domain, dma_addr_t iova)
+{
+ struct arm_smmu_device *smmu = smmu_domain->smmu;
+ int idx = smmu_domain->cfg.cbndx;
+ u32 frsynra;
+ u16 sid;
+
+ frsynra = arm_smmu_gr1_read(smmu, ARM_SMMU_GR1_CBFRSYNRA(idx));
+ sid = FIELD_GET(ARM_SMMU_CBFRSYNRA_SID, frsynra);
+
+ return qcom_iova_to_phys(smmu_domain, iova, sid);
+}
+
+static phys_addr_t qcom_smmu_verify_fault(struct arm_smmu_domain *smmu_domain, dma_addr_t iova, u32 fsr)
+{
+ struct io_pgtable *iop = io_pgtable_ops_to_pgtable(smmu_domain->pgtbl_ops);
+ struct arm_smmu_device *smmu = smmu_domain->smmu;
+ phys_addr_t phys_post_tlbiall;
+ phys_addr_t phys;
+
+ phys = qcom_smmu_iova_to_phys_hard(smmu_domain, iova);
+ io_pgtable_tlb_flush_all(iop);
+ phys_post_tlbiall = qcom_smmu_iova_to_phys_hard(smmu_domain, iova);
+
+ if (phys != phys_post_tlbiall) {
+ dev_err(smmu->dev,
+ "ATOS results differed across TLBIALL... (before: %pa after: %pa)\n",
+ &phys, &phys_post_tlbiall);
+ }
+
+ return (phys == 0 ? phys_post_tlbiall : phys);
+}
+
+irqreturn_t qcom_smmu_context_fault(int irq, void *dev)
+{
+ struct arm_smmu_domain *smmu_domain = dev;
+ struct io_pgtable_ops *ops = smmu_domain->pgtbl_ops;
+ struct arm_smmu_device *smmu = smmu_domain->smmu;
+ u32 fsr, fsynr, cbfrsynra, resume = 0;
+ int idx = smmu_domain->cfg.cbndx;
+ phys_addr_t phys_soft;
+ unsigned long iova;
+ int ret, tmp;
+
+ static DEFINE_RATELIMIT_STATE(_rs,
+ DEFAULT_RATELIMIT_INTERVAL,
+ DEFAULT_RATELIMIT_BURST);
+
+ fsr = arm_smmu_cb_read(smmu, idx, ARM_SMMU_CB_FSR);
+ if (!(fsr & ARM_SMMU_FSR_FAULT))
+ return IRQ_NONE;
+
+ fsynr = arm_smmu_cb_read(smmu, idx, ARM_SMMU_CB_FSYNR0);
+ iova = arm_smmu_cb_readq(smmu, idx, ARM_SMMU_CB_FAR);
+ cbfrsynra = arm_smmu_gr1_read(smmu, ARM_SMMU_GR1_CBFRSYNRA(idx));
+
+ phys_soft = ops->iova_to_phys(ops, iova);
+
+ tmp = report_iommu_fault(&smmu_domain->domain, NULL, iova,
+ fsynr & ARM_SMMU_FSYNR0_WNR ? IOMMU_FAULT_WRITE : IOMMU_FAULT_READ);
+ if (!tmp || tmp == -EBUSY) {
+ dev_dbg(smmu->dev,
+ "Context fault handled by client: iova=0x%08lx, fsr=0x%x, fsynr=0x%x, cb=%d\n",
+ iova, fsr, fsynr, idx);
+ dev_dbg(smmu->dev, "soft iova-to-phys=%pa\n", &phys_soft);
+ ret = IRQ_HANDLED;
+ resume = ARM_SMMU_RESUME_TERMINATE;
+ } else {
+ phys_addr_t phys_atos = qcom_smmu_verify_fault(smmu_domain, iova, fsr);
+
+ if (__ratelimit(&_rs)) {
+ dev_err(smmu->dev,
+ "Unhandled context fault: fsr=0x%x, iova=0x%08lx, fsynr=0x%x, cbfrsynra=0x%x, cb=%d\n",
+ fsr, iova, fsynr, cbfrsynra, idx);
+ dev_err(smmu->dev,
+ "FSR = %08x [%s%s%s%s%s%s%s%s%s], SID=0x%x\n",
+ fsr,
+ (fsr & 0x02) ? "TF " : "",
+ (fsr & 0x04) ? "AFF " : "",
+ (fsr & 0x08) ? "PF " : "",
+ (fsr & 0x10) ? "EF " : "",
+ (fsr & 0x20) ? "TLBMCF " : "",
+ (fsr & 0x40) ? "TLBLKF " : "",
+ (fsr & 0x80) ? "MHF " : "",
+ (fsr & 0x40000000) ? "SS " : "",
+ (fsr & 0x80000000) ? "MULTI " : "",
+ cbfrsynra);
+
+ dev_err(smmu->dev,
+ "soft iova-to-phys=%pa\n", &phys_soft);
+ if (!phys_soft)
+ dev_err(smmu->dev,
+ "SOFTWARE TABLE WALK FAILED! Looks like %s accessed an unmapped address!\n",
+ dev_name(smmu->dev));
+ if (phys_atos)
+ dev_err(smmu->dev, "hard iova-to-phys (ATOS)=%pa\n",
+ &phys_atos);
+ else
+ dev_err(smmu->dev, "hard iova-to-phys (ATOS) failed\n");
+ }
+ ret = IRQ_NONE;
+ resume = ARM_SMMU_RESUME_TERMINATE;
+ }
+
+ /*
+ * If the client returns -EBUSY, do not clear FSR and do not RESUME
+ * if stalled. This is required to keep the IOMMU client stalled on
+ * the outstanding fault. This gives the client a chance to take any
+ * debug action and then terminate the stalled transaction.
+ * So, the sequence in case of stall on fault should be:
+ * 1) Do not clear FSR or write to RESUME here
+ * 2) Client takes any debug action
+ * 3) Client terminates the stalled transaction and resumes the IOMMU
+ * 4) Client clears FSR. The FSR should only be cleared after 3) and
+ * not before so that the fault remains outstanding. This ensures
+ * SCTLR.HUPCF has the desired effect if subsequent transactions also
+ * need to be terminated.
+ */
+ if (tmp != -EBUSY) {
+ /* Clear the faulting FSR */
+ arm_smmu_cb_write(smmu, idx, ARM_SMMU_CB_FSR, fsr);
+
+ /* Retry or terminate any stalled transactions */
+ if (fsr & ARM_SMMU_FSR_SS)
+ arm_smmu_cb_write(smmu, idx, ARM_SMMU_CB_RESUME, resume);
+ }
+
+ return ret;
+}
+
static int qcom_tbu_probe(struct platform_device *pdev)
{
struct of_phandle_args args = { .args_count = 2 };
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
index 5c7cfc51b57c..7a58b1b96bca 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
@@ -422,6 +422,10 @@ static const struct arm_smmu_impl sdm845_smmu_500_impl = {
.reset = qcom_sdm845_smmu500_reset,
.write_s2cr = qcom_smmu_write_s2cr,
.tlb_sync = qcom_smmu_tlb_sync,
+#ifdef CONFIG_ARM_SMMU_QCOM_TBU
+ .context_fault = qcom_smmu_context_fault,
+ .context_fault_needs_threaded_irq = true,
+#endif
};
static const struct arm_smmu_impl qcom_adreno_smmu_v2_impl = {
Operating the TBUs (Translation Buffer Units) from Linux on Qualcomm
platforms can help with debugging context faults. To help with that,
the TBUs can run ATOS (Address Translation Operations) to manually
trigger address translation of IOVA to physical address in hardware
and provide more details when a context fault happens.
The driver will control the resources needed by the TBU to allow
running the debug operations such as ATOS, check for outstanding
transactions, do snapshot capture etc.
Signed-off-by: Georgi Djakov <[email protected]>
---
drivers/iommu/Kconfig | 9 +
drivers/iommu/arm/arm-smmu/Makefile | 1 +
.../iommu/arm/arm-smmu/arm-smmu-qcom-tbu.c | 366 ++++++++++++++++++
drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h | 2 +
drivers/iommu/arm/arm-smmu/arm-smmu.h | 2 +
5 files changed, 380 insertions(+)
create mode 100644 drivers/iommu/arm/arm-smmu/arm-smmu-qcom-tbu.c
diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index e0796fa84227..989e481e3151 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -374,6 +374,15 @@ config ARM_SMMU_QCOM
When running on a Qualcomm platform that has the custom variant
of the ARM SMMU, this needs to be built into the SMMU driver.
+config ARM_SMMU_QCOM_TBU
+ bool "Qualcomm TBU driver"
+ depends on ARM_SMMU_QCOM
+ help
+ The SMMUs on Qualcomm platforms may include Translation Buffer
+ Units (TBUs) for each master. Enabling support for these units
+ allows to operate the TBUs and obtain additional information
+ when debugging memory management issues like context faults.
+
config ARM_SMMU_QCOM_DEBUG
bool "ARM SMMU QCOM implementation defined debug support"
depends on ARM_SMMU_QCOM
diff --git a/drivers/iommu/arm/arm-smmu/Makefile b/drivers/iommu/arm/arm-smmu/Makefile
index 2a5a95e8e3f9..c35ff78fcfd5 100644
--- a/drivers/iommu/arm/arm-smmu/Makefile
+++ b/drivers/iommu/arm/arm-smmu/Makefile
@@ -3,4 +3,5 @@ obj-$(CONFIG_QCOM_IOMMU) += qcom_iommu.o
obj-$(CONFIG_ARM_SMMU) += arm_smmu.o
arm_smmu-objs += arm-smmu.o arm-smmu-impl.o arm-smmu-nvidia.o
arm_smmu-$(CONFIG_ARM_SMMU_QCOM) += arm-smmu-qcom.o
+arm_smmu-$(CONFIG_ARM_SMMU_QCOM_TBU) += arm-smmu-qcom-tbu.o
arm_smmu-$(CONFIG_ARM_SMMU_QCOM_DEBUG) += arm-smmu-qcom-debug.o
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-tbu.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-tbu.c
new file mode 100644
index 000000000000..2a7c8a9cc9e6
--- /dev/null
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-tbu.c
@@ -0,0 +1,366 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved
+ */
+
+#include <linux/interconnect.h>
+#include <linux/iopoll.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+#include "arm-smmu.h"
+#include "arm-smmu-qcom.h"
+
+#define TBU_DBG_TIMEOUT_US 100
+#define DEBUG_AXUSER_REG 0x30
+#define DEBUG_AXUSER_CDMID GENMASK_ULL(43, 36)
+#define DEBUG_AXUSER_CDMID_VAL 0xff
+#define DEBUG_PAR_REG 0x28
+#define DEBUG_PAR_FAULT_VAL BIT(0)
+#define DEBUG_PAR_PA GENMASK_ULL(47, 12)
+#define DEBUG_SID_HALT_REG 0x0
+#define DEBUG_SID_HALT_VAL BIT(16)
+#define DEBUG_SID_HALT_SID GENMASK(9, 0)
+#define DEBUG_SR_HALT_ACK_REG 0x20
+#define DEBUG_SR_HALT_ACK_VAL BIT(1)
+#define DEBUG_SR_ECATS_RUNNING_VAL BIT(0)
+#define DEBUG_TXN_AXCACHE GENMASK(5, 2)
+#define DEBUG_TXN_AXPROT GENMASK(8, 6)
+#define DEBUG_TXN_AXPROT_PRIV 0x1
+#define DEBUG_TXN_AXPROT_NSEC 0x2
+#define DEBUG_TXN_TRIGG_REG 0x18
+#define DEBUG_TXN_TRIGGER BIT(0)
+#define DEBUG_VA_ADDR_REG 0x8
+
+static LIST_HEAD(tbu_list);
+static DEFINE_MUTEX(tbu_list_lock);
+static DEFINE_SPINLOCK(atos_lock);
+
+struct qcom_tbu {
+ struct device *dev;
+ struct device_node *smmu_np;
+ u32 sid_range[2];
+ struct list_head list;
+ struct clk *clk;
+ struct icc_path *path;
+ void __iomem *base;
+ spinlock_t halt_lock; /* multiple halt or resume can't execute concurrently */
+ int halt_count;
+};
+
+static struct qcom_smmu *to_qcom_smmu(struct arm_smmu_device *smmu)
+{
+ return container_of(smmu, struct qcom_smmu, smmu);
+}
+
+static struct qcom_tbu *qcom_find_tbu(struct qcom_smmu *qsmmu, u32 sid)
+{
+ struct qcom_tbu *tbu;
+ u32 start, end;
+
+ mutex_lock(&tbu_list_lock);
+
+ list_for_each_entry(tbu, &tbu_list, list) {
+ start = tbu->sid_range[0];
+ end = start + tbu->sid_range[1];
+
+ if (qsmmu->smmu.dev->of_node == tbu->smmu_np &&
+ start <= sid && sid < end) {
+ mutex_unlock(&tbu_list_lock);
+ return tbu;
+ }
+ }
+
+ mutex_unlock(&tbu_list_lock);
+ dev_err(qsmmu->smmu.dev, "Unable to find TBU for sid 0x%x\n", sid);
+ return NULL;
+}
+
+static int qcom_tbu_halt(struct qcom_tbu *tbu, struct arm_smmu_domain *smmu_domain)
+{
+ struct arm_smmu_device *smmu = smmu_domain->smmu;
+ int ret = 0, idx = smmu_domain->cfg.cbndx;
+ unsigned long flags;
+ u32 val, fsr, status;
+
+ spin_lock_irqsave(&tbu->halt_lock, flags);
+ if (tbu->halt_count) {
+ tbu->halt_count++;
+ goto out;
+ }
+
+ val = readl_relaxed(tbu->base + DEBUG_SID_HALT_REG);
+ val |= DEBUG_SID_HALT_VAL;
+ writel_relaxed(val, tbu->base + DEBUG_SID_HALT_REG);
+
+ fsr = arm_smmu_cb_read(smmu, idx, ARM_SMMU_CB_FSR);
+ if ((fsr & ARM_SMMU_FSR_FAULT) && (fsr & ARM_SMMU_FSR_SS)) {
+ u32 sctlr_orig, sctlr;
+
+ /*
+ * We are in a fault. Our request to halt the bus will not
+ * complete until transactions in front of us (such as the fault
+ * itself) have completed. Disable iommu faults and terminate
+ * any existing transactions.
+ */
+ sctlr_orig = arm_smmu_cb_read(smmu, idx, ARM_SMMU_CB_SCTLR);
+ sctlr = sctlr_orig & ~(ARM_SMMU_SCTLR_CFCFG | ARM_SMMU_SCTLR_CFIE);
+ arm_smmu_cb_write(smmu, idx, ARM_SMMU_CB_SCTLR, sctlr);
+ arm_smmu_cb_write(smmu, idx, ARM_SMMU_CB_FSR, fsr);
+ arm_smmu_cb_write(smmu, idx, ARM_SMMU_CB_RESUME, ARM_SMMU_RESUME_TERMINATE);
+ arm_smmu_cb_write(smmu, idx, ARM_SMMU_CB_SCTLR, sctlr_orig);
+ }
+
+ if (readl_poll_timeout_atomic(tbu->base + DEBUG_SR_HALT_ACK_REG, status,
+ (status & DEBUG_SR_HALT_ACK_VAL),
+ 0, TBU_DBG_TIMEOUT_US)) {
+ dev_err(tbu->dev, "Timeout while trying to halt TBU!\n");
+ ret = -ETIMEDOUT;
+
+ val = readl_relaxed(tbu->base + DEBUG_SID_HALT_REG);
+ val &= ~DEBUG_SID_HALT_VAL;
+ writel_relaxed(val, tbu->base + DEBUG_SID_HALT_REG);
+
+ goto out;
+ }
+
+ tbu->halt_count = 1;
+
+out:
+ spin_unlock_irqrestore(&tbu->halt_lock, flags);
+ return ret;
+}
+
+static void qcom_tbu_resume(struct qcom_tbu *tbu)
+{
+ unsigned long flags;
+ u32 val;
+
+ spin_lock_irqsave(&tbu->halt_lock, flags);
+ if (!tbu->halt_count) {
+ WARN(1, "%s: halt_count is 0", dev_name(tbu->dev));
+ goto out;
+ }
+
+ if (tbu->halt_count > 1) {
+ tbu->halt_count--;
+ goto out;
+ }
+
+ val = readl_relaxed(tbu->base + DEBUG_SID_HALT_REG);
+ val &= ~DEBUG_SID_HALT_VAL;
+ writel_relaxed(val, tbu->base + DEBUG_SID_HALT_REG);
+
+ tbu->halt_count = 0;
+out:
+ spin_unlock_irqrestore(&tbu->halt_lock, flags);
+}
+
+static phys_addr_t qcom_tbu_trigger_atos(struct arm_smmu_domain *smmu_domain,
+ struct qcom_tbu *tbu, dma_addr_t iova, u32 sid)
+{
+ bool atos_timedout = false;
+ phys_addr_t phys = 0;
+ ktime_t timeout;
+ u64 val;
+
+ /* Set address and stream-id */
+ val = readq_relaxed(tbu->base + DEBUG_SID_HALT_REG);
+ val &= ~DEBUG_SID_HALT_SID;
+ val |= FIELD_PREP(DEBUG_SID_HALT_SID, sid);
+ writeq_relaxed(val, tbu->base + DEBUG_SID_HALT_REG);
+ writeq_relaxed(iova, tbu->base + DEBUG_VA_ADDR_REG);
+ val = FIELD_PREP(DEBUG_AXUSER_CDMID, DEBUG_AXUSER_CDMID_VAL);
+ writeq_relaxed(val, tbu->base + DEBUG_AXUSER_REG);
+
+ /* Write-back read and write-allocate */
+ val = FIELD_PREP(DEBUG_TXN_AXCACHE, 0xf);
+
+ /* Non-secure access */
+ val |= FIELD_PREP(DEBUG_TXN_AXPROT, DEBUG_TXN_AXPROT_NSEC);
+
+ /* Privileged access */
+ val |= FIELD_PREP(DEBUG_TXN_AXPROT, DEBUG_TXN_AXPROT_PRIV);
+
+ val |= DEBUG_TXN_TRIGGER;
+ writeq_relaxed(val, tbu->base + DEBUG_TXN_TRIGG_REG);
+
+ timeout = ktime_add_us(ktime_get(), TBU_DBG_TIMEOUT_US);
+ for (;;) {
+ val = readl_relaxed(tbu->base + DEBUG_SR_HALT_ACK_REG);
+ if (!(val & DEBUG_SR_ECATS_RUNNING_VAL))
+ break;
+ val = readl_relaxed(tbu->base + DEBUG_PAR_REG);
+ if (val & DEBUG_PAR_FAULT_VAL)
+ break;
+ if (ktime_compare(ktime_get(), timeout) > 0) {
+ atos_timedout = true;
+ break;
+ }
+ }
+
+ val = readq_relaxed(tbu->base + DEBUG_PAR_REG);
+ if (val & DEBUG_PAR_FAULT_VAL)
+ dev_err(tbu->dev, "ATOS generated a fault interrupt! PAR = %llx, SID=0x%x\n",
+ val, sid);
+ else if (atos_timedout)
+ dev_err_ratelimited(tbu->dev, "ATOS translation timed out!\n");
+ else
+ phys = FIELD_GET(DEBUG_PAR_PA, val);
+
+ /* Reset hardware */
+ writeq_relaxed(0, tbu->base + DEBUG_TXN_TRIGG_REG);
+ writeq_relaxed(0, tbu->base + DEBUG_VA_ADDR_REG);
+ val = readl_relaxed(tbu->base + DEBUG_SID_HALT_REG);
+ val &= ~DEBUG_SID_HALT_SID;
+ writel_relaxed(val, tbu->base + DEBUG_SID_HALT_REG);
+
+ return phys;
+}
+
+static phys_addr_t qcom_iova_to_phys(struct arm_smmu_domain *smmu_domain,
+ dma_addr_t iova, u32 sid)
+{
+ struct arm_smmu_device *smmu = smmu_domain->smmu;
+ struct qcom_smmu *qsmmu = to_qcom_smmu(smmu);
+ int idx = smmu_domain->cfg.cbndx;
+ struct qcom_tbu *tbu;
+ u32 sctlr_orig, sctlr;
+ phys_addr_t phys = 0;
+ unsigned long flags;
+ int attempt = 0;
+ int ret;
+ u64 fsr;
+
+ tbu = qcom_find_tbu(qsmmu, sid);
+ if (!tbu)
+ return 0;
+
+ ret = icc_set_bw(tbu->path, 0, UINT_MAX);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(tbu->clk);
+ if (ret)
+ goto disable_icc;
+
+ ret = qcom_tbu_halt(tbu, smmu_domain);
+ if (ret)
+ goto disable_clk;
+
+ /*
+ * ATOS/ECATS can trigger the fault interrupt, so disable it temporarily
+ * and check for an interrupt manually.
+ */
+ sctlr_orig = arm_smmu_cb_read(smmu, idx, ARM_SMMU_CB_SCTLR);
+ sctlr = sctlr_orig & ~(ARM_SMMU_SCTLR_CFCFG | ARM_SMMU_SCTLR_CFIE);
+ arm_smmu_cb_write(smmu, idx, ARM_SMMU_CB_SCTLR, sctlr);
+
+ fsr = arm_smmu_cb_read(smmu, idx, ARM_SMMU_CB_FSR);
+ if (fsr & ARM_SMMU_FSR_FAULT) {
+ /* Clear pending interrupts */
+ arm_smmu_cb_write(smmu, idx, ARM_SMMU_CB_FSR, fsr);
+
+ /*
+ * TBU halt takes care of resuming any stalled transcation.
+ * Kept it here for completeness sake.
+ */
+ if (fsr & ARM_SMMU_FSR_SS)
+ arm_smmu_cb_write(smmu, idx, ARM_SMMU_CB_RESUME,
+ ARM_SMMU_RESUME_TERMINATE);
+ }
+
+ /* Only one concurrent atos operation */
+ spin_lock_irqsave(&atos_lock, flags);
+
+ /*
+ * If the translation fails, attempt the lookup more time."
+ */
+ do {
+ phys = qcom_tbu_trigger_atos(smmu_domain, tbu, iova, sid);
+
+ fsr = arm_smmu_cb_read(smmu, idx, ARM_SMMU_CB_FSR);
+ if (fsr & ARM_SMMU_FSR_FAULT) {
+ /* Clear pending interrupts */
+ arm_smmu_cb_write(smmu, idx, ARM_SMMU_CB_FSR, fsr);
+
+ if (fsr & ARM_SMMU_FSR_SS)
+ arm_smmu_cb_write(smmu, idx, ARM_SMMU_CB_RESUME,
+ ARM_SMMU_RESUME_TERMINATE);
+ }
+ } while (!phys && attempt++ < 2);
+
+ arm_smmu_cb_write(smmu, idx, ARM_SMMU_CB_SCTLR, sctlr_orig);
+ spin_unlock_irqrestore(&atos_lock, flags);
+ qcom_tbu_resume(tbu);
+
+ /* Read to complete prior write transcations */
+ readl_relaxed(tbu->base + DEBUG_SR_HALT_ACK_REG);
+
+disable_clk:
+ clk_disable_unprepare(tbu->clk);
+disable_icc:
+ icc_set_bw(tbu->path, 0, 0);
+
+ return phys;
+}
+
+static int qcom_tbu_probe(struct platform_device *pdev)
+{
+ struct of_phandle_args args = { .args_count = 2 };
+ struct device_node *np = pdev->dev.of_node;
+ struct device *dev = &pdev->dev;
+ struct qcom_tbu *tbu;
+
+ tbu = devm_kzalloc(dev, sizeof(*tbu), GFP_KERNEL);
+ if (!tbu)
+ return -ENOMEM;
+
+ tbu->dev = dev;
+ INIT_LIST_HEAD(&tbu->list);
+ spin_lock_init(&tbu->halt_lock);
+
+ if (of_parse_phandle_with_args(np, "qcom,stream-id-range", "#iommu-cells", 0, &args)) {
+ dev_err(dev, "Cannot parse the 'qcom,stream-id-range' DT property\n");
+ return -EINVAL;
+ }
+
+ tbu->smmu_np = args.np;
+ tbu->sid_range[0] = args.args[0];
+ tbu->sid_range[1] = args.args[1];
+ of_node_put(args.np);
+
+ tbu->base = devm_of_iomap(dev, np, 0, NULL);
+ if (IS_ERR(tbu->base))
+ return PTR_ERR(tbu->base);
+
+ tbu->clk = devm_clk_get_optional(dev, NULL);
+ if (IS_ERR(tbu->clk))
+ return PTR_ERR(tbu->clk);
+
+ tbu->path = devm_of_icc_get(dev, NULL);
+ if (IS_ERR(tbu->path))
+ return PTR_ERR(tbu->path);
+
+ mutex_lock(&tbu_list_lock);
+ list_add_tail(&tbu->list, &tbu_list);
+ mutex_unlock(&tbu_list_lock);
+
+ return 0;
+}
+
+static const struct of_device_id qcom_tbu_of_match[] = {
+ { .compatible = "qcom,sc7280-tbu" },
+ { .compatible = "qcom,sdm845-tbu" },
+ { }
+};
+
+static struct platform_driver qcom_tbu_driver = {
+ .driver = {
+ .name = "qcom_tbu",
+ .of_match_table = qcom_tbu_of_match,
+ },
+ .probe = qcom_tbu_probe,
+};
+builtin_platform_driver(qcom_tbu_driver);
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h
index 593910567b88..9bb3ae7d62da 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h
@@ -30,6 +30,8 @@ struct qcom_smmu_match_data {
const struct arm_smmu_impl *adreno_impl;
};
+irqreturn_t qcom_smmu_context_fault(int irq, void *dev);
+
#ifdef CONFIG_ARM_SMMU_QCOM_DEBUG
void qcom_smmu_tlb_sync_debug(struct arm_smmu_device *smmu);
#else
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu.h b/drivers/iommu/arm/arm-smmu/arm-smmu.h
index 836ed6799a80..1670e95c4637 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu.h
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu.h
@@ -136,6 +136,7 @@ enum arm_smmu_cbar_type {
#define ARM_SMMU_CBAR_VMID GENMASK(7, 0)
#define ARM_SMMU_GR1_CBFRSYNRA(n) (0x400 + ((n) << 2))
+#define ARM_SMMU_CBFRSYNRA_SID GENMASK(15, 0)
#define ARM_SMMU_GR1_CBA2R(n) (0x800 + ((n) << 2))
#define ARM_SMMU_CBA2R_VMID16 GENMASK(31, 16)
@@ -238,6 +239,7 @@ enum arm_smmu_cbar_type {
#define ARM_SMMU_CB_ATSR 0x8f0
#define ARM_SMMU_ATSR_ACTIVE BIT(0)
+#define ARM_SMMU_RESUME_TERMINATE BIT(0)
/* Maximum number of context banks per SMMU */
#define ARM_SMMU_MAX_CBS 128
Add the device-tree nodes for the TBUs (translation buffer units) that
are present on the sdm845 platforms. The TBUs can be used debug the
kernel and provide additional information when a context faults occur.
Describe the all registers, clocks, interconnects and power-domain
resources that are needed for each of the TBUs.
Signed-off-by: Georgi Djakov <[email protected]>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 70 ++++++++++++++++++++++++++++
1 file changed, 70 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 2f20be99ee7e..381537f03fae 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -15,6 +15,7 @@
#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/firmware/qcom,scm.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/interconnect/qcom,sdm845.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -5085,6 +5086,75 @@ apps_smmu: iommu@15000000 {
<GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
};
+ anoc_1_tbu: tbu@150c5000 {
+ compatible = "qcom,sdm845-tbu";
+ reg = <0x0 0x150c5000 0x0 0x1000>;
+ interconnects = <&system_noc MASTER_GNOC_SNOC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_IMEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+ power-domains = <&gcc HLOS1_VOTE_AGGRE_NOC_MMU_TBU1_GDSC>;
+ qcom,stream-id-range = <&apps_smmu 0x0 0x400>;
+ };
+
+ anoc_2_tbu: tbu@150c9000 {
+ compatible = "qcom,sdm845-tbu";
+ reg = <0x0 0x150c9000 0x0 0x1000>;
+ interconnects = <&system_noc MASTER_GNOC_SNOC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_IMEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+ power-domains = <&gcc HLOS1_VOTE_AGGRE_NOC_MMU_TBU2_GDSC>;
+ qcom,stream-id-range = <&apps_smmu 0x400 0x400>;
+ };
+
+ mnoc_hf_0_tbu: tbu@150cd000 {
+ compatible = "qcom,sdm845-tbu";
+ reg = <0x0 0x150cd000 0x0 0x1000>;
+ interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ACTIVE_ONLY
+ &mmss_noc SLAVE_MNOC_HF_MEM_NOC QCOM_ICC_TAG_ACTIVE_ONLY>;
+ qcom,stream-id-range = <&apps_smmu 0x800 0x400>;
+ };
+
+ mnoc_hf_1_tbu: tbu@150d1000 {
+ compatible = "qcom,sdm845-tbu";
+ reg = <0x0 0x150d1000 0x0 0x1000>;
+ interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ACTIVE_ONLY
+ &mmss_noc SLAVE_MNOC_HF_MEM_NOC QCOM_ICC_TAG_ACTIVE_ONLY>;
+ qcom,stream-id-range = <&apps_smmu 0xc00 0x400>;
+ };
+
+ mnoc_sf_0_tbu: tbu@150d5000 {
+ compatible = "qcom,sdm845-tbu";
+ reg = <0x0 0x150d5000 0x0 0x1000>;
+ interconnects = <&mmss_noc MASTER_CAMNOC_SF QCOM_ICC_TAG_ACTIVE_ONLY
+ &mmss_noc SLAVE_MNOC_SF_MEM_NOC QCOM_ICC_TAG_ACTIVE_ONLY>;
+ qcom,stream-id-range = <&apps_smmu 0x1000 0x400>;
+ };
+
+ compute_dsp_tbu: tbu@150d9000 {
+ compatible = "qcom,sdm845-tbu";
+ reg = <0x0 0x150d9000 0x0 0x1000>;
+ interconnects = <&system_noc MASTER_GNOC_SNOC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_IMEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+ qcom,stream-id-range = <&apps_smmu 0x1400 0x400>;
+ };
+
+ adsp_tbu: tbu@150dd000 {
+ compatible = "qcom,sdm845-tbu";
+ reg = <0x0 0x150dd000 0x0 0x1000>;
+ interconnects = <&system_noc MASTER_GNOC_SNOC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_IMEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+ power-domains = <&gcc HLOS1_VOTE_AGGRE_NOC_MMU_AUDIO_TBU_GDSC>;
+ qcom,stream-id-range = <&apps_smmu 0x1800 0x400>;
+ };
+
+ anoc_1_pcie_tbu: tbu@150e1000 {
+ compatible = "qcom,sdm845-tbu";
+ reg = <0x0 0x150e1000 0x0 0x1000>;
+ clocks = <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+ interconnects = <&system_noc MASTER_GNOC_SNOC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_IMEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+ power-domains = <&gcc HLOS1_VOTE_AGGRE_NOC_MMU_PCIE_TBU_GDSC>;
+ qcom,stream-id-range = <&apps_smmu 0x1c00 0x400>;
+ };
+
lpasscc: clock-controller@17014000 {
compatible = "qcom,sdm845-lpasscc";
reg = <0 0x17014000 0 0x1f004>, <0 0x17300000 0 0x200>;
Add the device-tree nodes for the TBUs (translation buffer units) that
are present on the sc7280 platforms. The TBUs can be used debug the
kernel and provide additional information when a context faults occur.
Describe the all registers, clocks, interconnects and power-domain
resources that are needed for each of the TBUs.
Signed-off-by: Georgi Djakov <[email protected]>
---
arch/arm64/boot/dts/qcom/sc7280.dtsi | 89 ++++++++++++++++++++++++++++
1 file changed, 89 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 7e7f0f0fb41b..5d8aa182e3a9 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -2970,6 +2970,18 @@ adreno_smmu: iommu@3da0000 {
dma-coherent;
};
+ gfx_0_tbu: tbu@3dd9000 {
+ compatible = "qcom,sc7280-tbu";
+ reg = <0x0 0x3dd9000 0x0 0x1000>;
+ qcom,stream-id-range = <&adreno_smmu 0x0 0x400>;
+ };
+
+ gfx_1_tbu: tbu@3ddd000 {
+ compatible = "qcom,sc7280-tbu";
+ reg = <0x0 0x3ddd000 0x0 0x1000>;
+ qcom,stream-id-range = <&adreno_smmu 0x400 0x400>;
+ };
+
remoteproc_mpss: remoteproc@4080000 {
compatible = "qcom,sc7280-mpss-pas";
reg = <0 0x04080000 0 0x10000>;
@@ -5778,6 +5790,83 @@ apps_smmu: iommu@15000000 {
<GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
};
+ anoc_1_tbu: tbu@151dd000 {
+ compatible = "qcom,sc7280-tbu";
+ reg = <0x0 0x151dd000 0x0 0x1000>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &cnoc3 SLAVE_TCU QCOM_ICC_TAG_ACTIVE_ONLY>;
+ qcom,stream-id-range = <&apps_smmu 0x0 0x400>;
+ };
+
+ anoc_2_tbu: tbu@151e1000 {
+ compatible = "qcom,sc7280-tbu";
+ reg = <0x0 0x151e1000 0x0 0x1000>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &cnoc3 SLAVE_TCU QCOM_ICC_TAG_ACTIVE_ONLY>;
+ qcom,stream-id-range = <&apps_smmu 0x400 0x400>;
+ };
+
+ mnoc_hf_0_tbu: tbu@151e5000 {
+ compatible = "qcom,sc7280-tbu";
+ reg = <0x0 0x151e5000 0x0 0x1000>;
+ interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ACTIVE_ONLY
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+ power-domains = <&gcc HLOS1_VOTE_MMNOC_MMU_TBU_HF0_GDSC>;
+ qcom,stream-id-range = <&apps_smmu 0x800 0x400>;
+ };
+
+ mnoc_hf_1_tbu: tbu@151e9000 {
+ compatible = "qcom,sc7280-tbu";
+ reg = <0x0 0x151e9000 0x0 0x1000>;
+ interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ACTIVE_ONLY
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+ power-domains = <&gcc HLOS1_VOTE_MMNOC_MMU_TBU_HF1_GDSC>;
+ qcom,stream-id-range = <&apps_smmu 0xc00 0x400>;
+ };
+
+ compute_dsp_0_tbu: tbu@151ed000 {
+ compatible = "qcom,sc7280-tbu";
+ reg = <0x0 0x151ed000 0x0 0x1000>;
+ interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+ power-domains = <&gcc HLOS1_VOTE_TURING_MMU_TBU1_GDSC>;
+ qcom,stream-id-range = <&apps_smmu 0x1000 0x400>;
+ };
+
+ compute_dsp_1_tbu: tbu@151f1000 {
+ compatible = "qcom,sc7280-tbu";
+ reg = <0x0 0x151f1000 0x0 0x1000>;
+ interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+ power-domains = <&gcc HLOS1_VOTE_TURING_MMU_TBU0_GDSC>;
+ qcom,stream-id-range = <&apps_smmu 0x1400 0x400>;
+ };
+
+ adsp_tbu: tbu@151f5000 {
+ compatible = "qcom,sc7280-tbu";
+ reg = <0x0 0x151f5000 0x0 0x1000>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &lpass_ag_noc SLAVE_LPASS_CORE_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+ qcom,stream-id-range = <&apps_smmu 0x1800 0x400>;
+ };
+
+ anoc_1_pcie_tbu: tbu@151f9000 {
+ compatible = "qcom,sc7280-tbu";
+ reg = <0x0 0x151f9000 0x0 0x1000>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &cnoc3 SLAVE_TCU QCOM_ICC_TAG_ACTIVE_ONLY>;
+ qcom,stream-id-range = <&apps_smmu 0x1c00 0x400>;
+ };
+
+ mnoc_sf_0_tbu: tbu@151fd000 {
+ compatible = "qcom,sc7280-tbu";
+ reg = <0x0 0x151fd000 0x0 0x1000>;
+ interconnects = <&mmss_noc MASTER_CAMNOC_SF QCOM_ICC_TAG_ACTIVE_ONLY
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+ power-domains = <&gcc HLOS1_VOTE_MMNOC_MMU_TBU_SF0_GDSC>;
+ qcom,stream-id-range = <&apps_smmu 0x2000 0x400>;
+ };
+
intc: interrupt-controller@17a00000 {
compatible = "arm,gic-v3";
reg = <0 0x17a00000 0 0x10000>, /* GICD */
The TBU support is now available, so let's allow it to be used on other
platforms that have the Qualcomm SMMU-500 implementation with TBUs. This
will allow the context fault handler to query the TBUs when a context
fault occurs.
Signed-off-by: Georgi Djakov <[email protected]>
---
drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
index 7a58b1b96bca..08e0ad325bab 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
@@ -413,6 +413,10 @@ static const struct arm_smmu_impl qcom_smmu_500_impl = {
.reset = arm_mmu500_reset,
.write_s2cr = qcom_smmu_write_s2cr,
.tlb_sync = qcom_smmu_tlb_sync,
+#ifdef CONFIG_ARM_SMMU_QCOM_TBU
+ .context_fault = qcom_smmu_context_fault,
+ .context_fault_needs_threaded_irq = true,
+#endif
};
static const struct arm_smmu_impl sdm845_smmu_500_impl = {
On Thu, 07 Mar 2024 11:05:19 -0800, Georgi Djakov wrote:
> The "apps_smmu" on the Qualcomm sdm845 platform is an implementation
> of the SMMU-500, that consists of a single TCU (Translation Control
> Unit) and multiple TBUs (Translation Buffer Units). These TBUs have
> hardware debugging features that are specific and only present on
> Qualcomm hardware. Represent them as independent DT nodes. List all
> the resources that are needed to operate them (such as registers,
> clocks, power domains and interconnects).
>
> Signed-off-by: Georgi Djakov <[email protected]>
> ---
> .../devicetree/bindings/iommu/qcom,tbu.yaml | 69 +++++++++++++++++++
> 1 file changed, 69 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iommu/qcom,tbu.yaml
>
Reviewed-by: Rob Herring <[email protected]>
On 3/7/24 20:05, Georgi Djakov wrote:
> The sdm845 platform now supports TBUs, so let's get additional debug
> info from the TBUs when a context fault occurs. Implement a custom
> context fault handler that does both software + hardware page table
> walks and TLB Invalidate All.
>
> Signed-off-by: Georgi Djakov <[email protected]>
> ---
[...]
> diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> index 5c7cfc51b57c..7a58b1b96bca 100644
> --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> @@ -422,6 +422,10 @@ static const struct arm_smmu_impl sdm845_smmu_500_impl = {
> .reset = qcom_sdm845_smmu500_reset,
> .write_s2cr = qcom_smmu_write_s2cr,
> .tlb_sync = qcom_smmu_tlb_sync,
> +#ifdef CONFIG_ARM_SMMU_QCOM_TBU
> + .context_fault = qcom_smmu_context_fault,
> + .context_fault_needs_threaded_irq = true,
> +#endif
Is this enough for cases where CONFIG_ARM_SMMU_QCOM_TBU=y but the
dts changes aren't there? IIUC this will spam the error message in
qcom_find_tbu()
Konrad