Use standard template for scsi_host_template structure to reduce
duplication.
Signed-off-by: John Garry <[email protected]>
---
drivers/scsi/mvsas/mv_init.c | 19 +------------------
1 file changed, 1 insertion(+), 18 deletions(-)
diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c
index 43ebb331e216..fb81d267c9cc 100644
--- a/drivers/scsi/mvsas/mv_init.c
+++ b/drivers/scsi/mvsas/mv_init.c
@@ -30,28 +30,11 @@ static const struct attribute_group *mvst_host_groups[];
#define SOC_SAS_NUM 2
static const struct scsi_host_template mvs_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .queuecommand = sas_queuecommand,
- .dma_need_drain = ata_scsi_dma_need_drain,
- .target_alloc = sas_target_alloc,
- .slave_configure = sas_slave_configure,
+ LIBSAS_SHT_BASE
.scan_finished = mvs_scan_finished,
.scan_start = mvs_scan_start,
- .change_queue_depth = sas_change_queue_depth,
- .bios_param = sas_bios_param,
.can_queue = 1,
- .this_id = -1,
.sg_tablesize = SG_ALL,
- .max_sectors = SCSI_DEFAULT_MAX_SECTORS,
- .eh_device_reset_handler = sas_eh_device_reset_handler,
- .eh_target_reset_handler = sas_eh_target_reset_handler,
- .slave_alloc = sas_slave_alloc,
- .target_destroy = sas_target_destroy,
- .ioctl = sas_ioctl,
-#ifdef CONFIG_COMPAT
- .compat_ioctl = sas_ioctl,
-#endif
.shost_groups = mvst_host_groups,
.track_queue_depth = 1,
};
--
2.31.1
On Fri, Mar 08, 2024 at 11:43:38AM +0000, John Garry wrote:
> Use standard template for scsi_host_template structure to reduce
> duplication.
>
> Signed-off-by: John Garry <[email protected]>
> ---
> drivers/scsi/mvsas/mv_init.c | 19 +------------------
> 1 file changed, 1 insertion(+), 18 deletions(-)
Reviewed-by: Igor Pylypiv <[email protected]>
Thanks,
Igor
>
> diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c
> index 43ebb331e216..fb81d267c9cc 100644
> --- a/drivers/scsi/mvsas/mv_init.c
> +++ b/drivers/scsi/mvsas/mv_init.c
> @@ -30,28 +30,11 @@ static const struct attribute_group *mvst_host_groups[];
> #define SOC_SAS_NUM 2
>
> static const struct scsi_host_template mvs_sht = {
> - .module = THIS_MODULE,
> - .name = DRV_NAME,
> - .queuecommand = sas_queuecommand,
> - .dma_need_drain = ata_scsi_dma_need_drain,
> - .target_alloc = sas_target_alloc,
> - .slave_configure = sas_slave_configure,
> + LIBSAS_SHT_BASE
> .scan_finished = mvs_scan_finished,
> .scan_start = mvs_scan_start,
> - .change_queue_depth = sas_change_queue_depth,
> - .bios_param = sas_bios_param,
> .can_queue = 1,
> - .this_id = -1,
> .sg_tablesize = SG_ALL,
> - .max_sectors = SCSI_DEFAULT_MAX_SECTORS,
> - .eh_device_reset_handler = sas_eh_device_reset_handler,
> - .eh_target_reset_handler = sas_eh_target_reset_handler,
> - .slave_alloc = sas_slave_alloc,
> - .target_destroy = sas_target_destroy,
> - .ioctl = sas_ioctl,
> -#ifdef CONFIG_COMPAT
> - .compat_ioctl = sas_ioctl,
> -#endif
> .shost_groups = mvst_host_groups,
> .track_queue_depth = 1,
> };
> --
> 2.31.1
>
On 2024/3/8 19:43, John Garry wrote:
> Use standard template for scsi_host_template structure to reduce
> duplication.
>
> Signed-off-by: John Garry<[email protected]>
> ---
> drivers/scsi/mvsas/mv_init.c | 19 +------------------
> 1 file changed, 1 insertion(+), 18 deletions(-)
Reviewed-by: Jason Yan <[email protected]>