Add the dts for "hlte" which is a phablet from 2013.
Signed-off-by: Luca Weiss <[email protected]>
---
Adam Honse (1):
ARM: dts: qcom: msm8974: Add Samsung Galaxy Note 3
Luca Weiss (1):
dt-bindings: arm: qcom: Add Samsung Galaxy Note 3
Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
arch/arm/boot/dts/qcom/Makefile | 1 +
.../boot/dts/qcom/qcom-msm8974-samsung-hlte.dts | 403 +++++++++++++++++++++
3 files changed, 405 insertions(+)
---
base-commit: 90d35da658da8cff0d4ecbb5113f5fac9d00eb72
change-id: 20240310-samsung-hlte-78d1a287b0a8
Best regards,
--
Luca Weiss <[email protected]>
From: Adam Honse <[email protected]>
Add the devicetree for this "phablet" using the Snapdragon 800 SoC.
Signed-off-by: Adam Honse <[email protected]>
[[email protected]: clean up, prepare for upstream]
Signed-off-by: Luca Weiss <[email protected]>
---
arch/arm/boot/dts/qcom/Makefile | 1 +
.../boot/dts/qcom/qcom-msm8974-samsung-hlte.dts | 403 +++++++++++++++++++++
2 files changed, 404 insertions(+)
diff --git a/arch/arm/boot/dts/qcom/Makefile b/arch/arm/boot/dts/qcom/Makefile
index 9cc1e14e6cd0..845af12d15a2 100644
--- a/arch/arm/boot/dts/qcom/Makefile
+++ b/arch/arm/boot/dts/qcom/Makefile
@@ -39,6 +39,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-msm8960-cdp.dtb \
qcom-msm8960-samsung-expressatt.dtb \
qcom-msm8974-lge-nexus5-hammerhead.dtb \
+ qcom-msm8974-samsung-hlte.dtb \
qcom-msm8974-sony-xperia-rhine-amami.dtb \
qcom-msm8974-sony-xperia-rhine-honami.dtb \
qcom-msm8974pro-fairphone-fp2.dtb \
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts
new file mode 100644
index 000000000000..e03227a49b67
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts
@@ -0,0 +1,403 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+ model = "Samsung Galaxy Note 3";
+ compatible = "samsung,hlte", "qcom,msm8974";
+ chassis-type = "handset";
+
+ aliases {
+ mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+ mmc1 = &sdhc_3; /* SDC3 SD card slot */
+ serial0 = &blsp1_uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_pin_a>;
+
+ key-home {
+ label = "home_key";
+ gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_HOMEPAGE>;
+ wakeup-source;
+ debounce-interval = <15>;
+ };
+
+ key-volume-down {
+ label = "volume_down";
+ gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ debounce-interval = <15>;
+ };
+
+ key-volume-up {
+ label = "volume_up";
+ gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ debounce-interval = <15>;
+ };
+ };
+
+ touch_ldo: regulator-touch {
+ compatible = "regulator-fixed";
+ regulator-name = "touch-ldo";
+
+ gpio = <&pm8941_gpios 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&touch_ldo_pin>;
+ };
+};
+
+&blsp1_i2c2 {
+ status = "okay";
+
+ touchscreen@20 {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x20>;
+
+ interrupt-parent = <&pm8941_gpios>;
+ interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
+
+ vdd-supply = <&pm8941_l10>;
+ vio-supply = <&touch_ldo>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&touch_pin>;
+
+ syna,startup-delay-ms = <100>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rmi4-f01@1 {
+ reg = <0x1>;
+ syna,nosleep-mode = <1>;
+ };
+
+ rmi4-f12@12 {
+ reg = <0x12>;
+ syna,sensor-type = <1>;
+ };
+ };
+};
+
+&blsp2_i2c6 {
+ status = "okay";
+
+ fuelgauge@36 {
+ compatible = "maxim,max17048";
+ reg = <0x36>;
+
+ maxim,double-soc;
+ maxim,rcomp = /bits/ 8 <0x56>;
+
+ interrupt-parent = <&pm8941_gpios>;
+ interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&fuelgauge_pin>;
+ };
+};
+
+&blsp1_uart2 {
+ status = "okay";
+};
+
+&pm8941_gpios {
+ gpio_keys_pin_a: gpio-keys-active-state {
+ pins = "gpio2", "gpio3", "gpio5";
+ function = "normal";
+ bias-pull-up;
+ power-source = <PM8941_GPIO_S3>;
+ };
+
+ fuelgauge_pin: fuelgauge-int-state {
+ pins = "gpio26";
+ function = "normal";
+ bias-disable;
+ input-enable;
+ power-source = <PM8941_GPIO_S3>;
+ };
+
+ touch_pin: touchscreen-int-state {
+ pins = "gpio30";
+ function = "normal";
+ bias-disable;
+ input-enable;
+ power-source = <PM8941_GPIO_S3>;
+ };
+
+ touch_ldo_pin: touchscreen-ldo-state {
+ pins = "gpio9";
+ function = "normal";
+ output-high;
+ power-source = <PM8941_GPIO_S3>;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+ };
+};
+
+&remoteproc_adsp {
+ cx-supply = <&pm8841_s2>;
+ status = "okay";
+};
+
+&remoteproc_mss {
+ cx-supply = <&pm8841_s2>;
+ mss-supply = <&pm8841_s3>;
+ mx-supply = <&pm8841_s1>;
+ pll-supply = <&pm8941_l12>;
+ status = "okay";
+};
+
+&rpm_requests {
+ regulators-0 {
+ compatible = "qcom,rpm-pm8841-regulators";
+
+ pm8841_s1: s1 {
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ pm8841_s2: s2 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ pm8841_s3: s3 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ pm8841_s4: s4 {
+ regulator-min-microvolt = <815000>;
+ regulator-max-microvolt = <900000>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,rpm-pm8941-regulators";
+
+ pm8941_s1: s1 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ };
+
+ pm8941_s2: s2 {
+ regulator-min-microvolt = <2150000>;
+ regulator-max-microvolt = <2150000>;
+ };
+
+ pm8941_s3: s3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8941_l1: l1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8941_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8941_l3: l3 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pm8941_l4: l4 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pm8941_l5: l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8941_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8941_l7: l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8941_l8: l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8941_l9: l9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8941_l10: l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8941_l11: l11 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1350000>;
+ };
+
+ pm8941_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ pm8941_l13: l13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pm8941_l14: l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8941_l15: l15 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8941_l16: l16 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ pm8941_l17: l17 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ pm8941_l18: l18 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ pm8941_l19: l19 {
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <3350000>;
+ };
+
+ pm8941_l20: l20 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+
+ regulator-allow-set-load;
+ regulator-system-load = <200000>;
+ };
+
+ pm8941_l21: l21 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+
+ regulator-allow-set-load;
+ regulator-system-load = <200000>;
+ };
+
+ pm8941_l22: l22 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ pm8941_l23: l23 {
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pm8941_l24: l24 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ };
+ };
+};
+
+&sdhc_1 {
+ vmmc-supply = <&pm8941_l20>;
+ vqmmc-supply = <&pm8941_s3>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhc1_pin_a>;
+
+ status = "okay";
+};
+
+&sdhc_3 {
+ max-frequency = <100000000>;
+
+ vmmc-supply = <&pm8941_l21>;
+ vqmmc-supply = <&pm8941_l21>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhc3_pin_a>;
+
+ status = "okay";
+};
+
+&tlmm {
+ sdhc1_pin_a: sdhc1-pin-active-state {
+ clk-pins {
+ pins = "sdc1_clk";
+ drive-strength = <4>;
+ bias-disable;
+ };
+
+ cmd-data-pins {
+ pins = "sdc1_cmd", "sdc1_data";
+ drive-strength = <4>;
+ bias-pull-up;
+ };
+ };
+
+ sdhc3_pin_a: sdhc3-pin-active-state {
+ pins = "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
+ function = "sdc3";
+ drive-strength = <8>;
+ bias-disable;
+ };
+};
+
+&usb {
+ phys = <&usb_hs1_phy>;
+ phy-select = <&tcsr 0xb000 0>;
+
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+
+ status = "okay";
+};
+
+&usb_hs1_phy {
+ v1p8-supply = <&pm8941_l6>;
+ v3p3-supply = <&pm8941_l24>;
+
+ qcom,init-seq = /bits/ 8 <0x1 0x64>;
+
+ status = "okay";
+};
--
2.44.0
Add the compatible for this Samsung smartphone ("phablet" as it was
named in that era).
Signed-off-by: Luca Weiss <[email protected]>
---
Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 1a5fb889a444..57182bfa27ee 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -214,6 +214,7 @@ properties:
- items:
- enum:
- lge,hammerhead
+ - samsung,hlte
- sony,xperia-amami
- sony,xperia-honami
- const: qcom,msm8974
--
2.44.0
On Sun, 10 Mar 2024 15:13:35 +0100, Luca Weiss wrote:
> Add the dts for "hlte" which is a phablet from 2013.
>
> Signed-off-by: Luca Weiss <[email protected]>
> ---
> Adam Honse (1):
> ARM: dts: qcom: msm8974: Add Samsung Galaxy Note 3
>
> Luca Weiss (1):
> dt-bindings: arm: qcom: Add Samsung Galaxy Note 3
>
> Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
> arch/arm/boot/dts/qcom/Makefile | 1 +
> .../boot/dts/qcom/qcom-msm8974-samsung-hlte.dts | 403 +++++++++++++++++++++
> 3 files changed, 405 insertions(+)
> ---
> base-commit: 90d35da658da8cff0d4ecbb5113f5fac9d00eb72
> change-id: 20240310-samsung-hlte-78d1a287b0a8
>
> Best regards,
> --
> Luca Weiss <[email protected]>
>
>
>
My bot found new DTB warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
New warnings running 'make CHECK_DTBS=y qcom/qcom-msm8974-samsung-hlte.dtb' for [email protected]:
arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dtb: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 0]]}
from schema $id: http://devicetree.org/schemas/root-node.yaml#
arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dtb: l2-cache: Unevaluated properties are not allowed ('qcom,saw' was unexpected)
from schema $id: http://devicetree.org/schemas/cache.yaml#
arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dtb: idle-states: 'spc' does not match any of the regexes: '^(cpu|cluster)-', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/cpu/idle-states.yaml#
arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dtb: syscon@f9011000: compatible: 'anyOf' conditional failed, one must be fixed:
['syscon'] is too short
'syscon' is not one of ['allwinner,sun8i-a83t-system-controller', 'allwinner,sun8i-h3-system-controller', 'allwinner,sun8i-v3s-system-controller', 'allwinner,sun50i-a64-system-controller', 'amd,pensando-elba-syscon', 'brcm,cru-clkset', 'freecom,fsg-cs2-system-controller', 'fsl,imx93-aonmix-ns-syscfg', 'fsl,imx93-wakeupmix-syscfg', 'hisilicon,dsa-subctrl', 'hisilicon,hi6220-sramctrl', 'hisilicon,pcie-sas-subctrl', 'hisilicon,peri-subctrl', 'hpe,gxp-sysreg', 'intel,lgm-syscon', 'loongson,ls1b-syscon', 'loongson,ls1c-syscon', 'marvell,armada-3700-usb2-host-misc', 'mediatek,mt8135-pctl-a-syscfg', 'mediatek,mt8135-pctl-b-syscfg', 'mediatek,mt8365-syscfg', 'microchip,lan966x-cpu-syscon', 'microchip,sparx5-cpu-syscon', 'mstar,msc313-pmsleep', 'nuvoton,ma35d1-sys', 'nuvoton,wpcm450-shm', 'rockchip,px30-qos', 'rockchip,rk3036-qos', 'rockchip,rk3066-qos', 'rockchip,rk3128-qos', 'rockchip,rk3228-qos', 'rockchip,rk3288-qos', 'rockchip,rk3368-qos', 'rockchip,rk3399-qos', 'rockchip,rk3568-qos', '
rockchip,rk3588-qos', 'rockchip,rv1126-qos', 'starfive,jh7100-sysmain', 'ti,am62-usb-phy-ctrl', 'ti,am654-dss-oldi-io-ctrl', 'ti,am654-serdes-ctrl', 'ti,j784s4-pcie-ctrl']
from schema $id: http://devicetree.org/schemas/mfd/syscon.yaml#
On Montag, 11. März 2024 15:23:30 CET Rob Herring wrote:
>
> On Sun, 10 Mar 2024 15:13:35 +0100, Luca Weiss wrote:
> > Add the dts for "hlte" which is a phablet from 2013.
> >
> > Signed-off-by: Luca Weiss <[email protected]>
> > ---
> > Adam Honse (1):
> > ARM: dts: qcom: msm8974: Add Samsung Galaxy Note 3
> >
> > Luca Weiss (1):
> > dt-bindings: arm: qcom: Add Samsung Galaxy Note 3
> >
> > Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
> > arch/arm/boot/dts/qcom/Makefile | 1 +
> > .../boot/dts/qcom/qcom-msm8974-samsung-hlte.dts | 403 +++++++++++++++++++++
> > 3 files changed, 405 insertions(+)
> > ---
> > base-commit: 90d35da658da8cff0d4ecbb5113f5fac9d00eb72
> > change-id: 20240310-samsung-hlte-78d1a287b0a8
> >
> > Best regards,
> > --
> > Luca Weiss <[email protected]>
> >
> >
> >
>
>
> My bot found new DTB warnings on the .dts files added or changed in this
> series.
>
> Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
> are fixed by another series. Ultimately, it is up to the platform
> maintainer whether these warnings are acceptable or not. No need to reply
> unless the platform maintainer has comments.
>
> If you already ran DT checks and didn't see these error(s), then
> make sure dt-schema is up to date:
>
> pip3 install dtschema --upgrade
>
>
> New warnings running 'make CHECK_DTBS=y qcom/qcom-msm8974-samsung-hlte.dtb' for [email protected]:
>
> arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dtb: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 0]]}
> from schema $id: http://devicetree.org/schemas/root-node.yaml#
> arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dtb: l2-cache: Unevaluated properties are not allowed ('qcom,saw' was unexpected)
> from schema $id: http://devicetree.org/schemas/cache.yaml#
> arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dtb: idle-states: 'spc' does not match any of the regexes: '^(cpu|cluster)-', 'pinctrl-[0-9]+'
> from schema $id: http://devicetree.org/schemas/cpu/idle-states.yaml#
> arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dtb: syscon@f9011000: compatible: 'anyOf' conditional failed, one must be fixed:
> ['syscon'] is too short
> 'syscon' is not one of ['allwinner,sun8i-a83t-system-controller', 'allwinner,sun8i-h3-system-controller', 'allwinner,sun8i-v3s-system-controller', 'allwinner,sun50i-a64-system-controller', 'amd,pensando-elba-syscon', 'brcm,cru-clkset', 'freecom,fsg-cs2-system-controller', 'fsl,imx93-aonmix-ns-syscfg', 'fsl,imx93-wakeupmix-syscfg', 'hisilicon,dsa-subctrl', 'hisilicon,hi6220-sramctrl', 'hisilicon,pcie-sas-subctrl', 'hisilicon,peri-subctrl', 'hpe,gxp-sysreg', 'intel,lgm-syscon', 'loongson,ls1b-syscon', 'loongson,ls1c-syscon', 'marvell,armada-3700-usb2-host-misc', 'mediatek,mt8135-pctl-a-syscfg', 'mediatek,mt8135-pctl-b-syscfg', 'mediatek,mt8365-syscfg', 'microchip,lan966x-cpu-syscon', 'microchip,sparx5-cpu-syscon', 'mstar,msc313-pmsleep', 'nuvoton,ma35d1-sys', 'nuvoton,wpcm450-shm', 'rockchip,px30-qos', 'rockchip,rk3036-qos', 'rockchip,rk3066-qos', 'rockchip,rk3128-qos', 'rockchip,rk3228-qos', 'rockchip,rk3288-qos', 'rockchip,rk3368-qos', 'rockchip,rk3399-qos', 'rockchip,rk3568-qos', '
> rockchip,rk3588-qos', 'rockchip,rv1126-qos', 'starfive,jh7100-sysmain', 'ti,am62-usb-phy-ctrl', 'ti,am654-dss-oldi-io-ctrl', 'ti,am654-serdes-ctrl', 'ti,j784s4-pcie-ctrl']
> from schema $id: http://devicetree.org/schemas/mfd/syscon.yaml#
Unfortunately all existing warnings from the .dtsi.
Regards
Luca
On 3/10/24 15:13, Luca Weiss wrote:
> From: Adam Honse <[email protected]>
>
> Add the devicetree for this "phablet" using the Snapdragon 800 SoC.
>
> Signed-off-by: Adam Honse <[email protected]>
> [[email protected]: clean up, prepare for upstream]
> Signed-off-by: Luca Weiss <[email protected]>
> ---
> arch/arm/boot/dts/qcom/Makefile | 1 +
> .../boot/dts/qcom/qcom-msm8974-samsung-hlte.dts | 403 +++++++++++++++++++++
> 2 files changed, 404 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom/Makefile b/arch/arm/boot/dts/qcom/Makefile
> index 9cc1e14e6cd0..845af12d15a2 100644
> --- a/arch/arm/boot/dts/qcom/Makefile
> +++ b/arch/arm/boot/dts/qcom/Makefile
> @@ -39,6 +39,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
> qcom-msm8960-cdp.dtb \
> qcom-msm8960-samsung-expressatt.dtb \
> qcom-msm8974-lge-nexus5-hammerhead.dtb \
> + qcom-msm8974-samsung-hlte.dtb \
> qcom-msm8974-sony-xperia-rhine-amami.dtb \
> qcom-msm8974-sony-xperia-rhine-honami.dtb \
> qcom-msm8974pro-fairphone-fp2.dtb \
> diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts
> new file mode 100644
> index 000000000000..e03227a49b67
> --- /dev/null
> +++ b/arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts
> @@ -0,0 +1,403 @@
> +// SPDX-License-Identifier: GPL-2.0
> +#include "qcom-msm8974.dtsi"
> +#include "pm8841.dtsi"
> +#include "pm8941.dtsi"
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/leds/common.h>
> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
> +
> +/ {
> + model = "Samsung Galaxy Note 3";
> + compatible = "samsung,hlte", "qcom,msm8974";
> + chassis-type = "handset";
> +
> + aliases {
> + mmc0 = &sdhc_1; /* SDC1 eMMC slot */
> + mmc1 = &sdhc_3; /* SDC3 SD card slot */
> + serial0 = &blsp1_uart1;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&gpio_keys_pin_a>;
property-n
property-names
> +
> + key-home {
> + label = "home_key";
"Home Key" etc.
> +
> + pm8941_l20: l20 {
> + regulator-min-microvolt = <2950000>;
> + regulator-max-microvolt = <2950000>;
> +
> + regulator-allow-set-load;
> + regulator-system-load = <200000>;
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
regulator-system-load = <200000>;
regulator-allow-set-load;
[...]
Konrad