This series adds support for the clock and reset controller in the Nuvoton
WPCM450 SoC. This means that the clock rates for peripherals will be calculated
automatically based on the clock tree as it was preconfigured by the bootloader.
The 24 MHz dummy clock, that is currently in the devicetree, is no longer needed.
Somewhat unfortunately, this also means that there is a breaking change once
the devicetree starts relying on the clock driver, but I find it acceptable in
this case, because WPCM450 is still at a somewhat early stage.
v10:
- A small tweak (using selected instead of extending an already-long
default line) in Kconfig, for better robustness
v9:
- Various improvements to the driver
- No longer use global clock names (and the clock-output-names property)
to refer to the reference clock, but instead rely on a phandle reference
v8:
- https://lore.kernel.org/lkml/[email protected]/
- Use %pe throughout the driver
v7:
- Simplified the error handling, by largely removing resource
deallocation, which:
- was already incomplete
- would only happen in a case when the system is in pretty bad state
because the clock driver didn't initialize correctly (in other
words, the clock driver isn't optional enough that complex error
handling really pays off)
v6:
- Dropped all patches except the clock binding and the clock driver, because
they have mostly been merged
- Minor correction to how RESET_SIMPLE is selected
v5:
- Dropped patch 2 (watchdog: npcm: Enable clock if provided), which
was since merged upstream
- Added patch 2 (clocksource: timer-npcm7xx: Enable timer 1 clock before use) again,
because I wasn't able to find it in linux-next
- Switched the driver to using struct clk_parent_data
- Rebased on 6.1-rc3
v4:
- Leave WDT clock running during after restart handler
- Fix reset controller initialization
- Dropped patch 2/7 (clocksource: timer-npcm7xx: Enable timer 1 clock before use),
as it was applied by Daniel Lezcano
v3:
- https://lore.kernel.org/lkml/[email protected]/
- Changed "refclk" string to "ref"
- Fixed some dead code in the driver
- Added clk_prepare_enable call to the watchdog restart handler
- Added a few review tags
v2:
- https://lore.kernel.org/lkml/[email protected]/
- various small improvements
v1:
- https://lore.kernel.org/lkml/[email protected]/
Jonathan Neuschäfer (4):
dt-bindings: clock: Add Nuvoton WPCM450 clock/reset controller
ARM: dts: wpcm450: Remove clock-output-names from reference clock node
clk: wpcm450: Add Nuvoton WPCM450 clock/reset controller driver
ARM: dts: wpcm450: Switch clocks to clock controller
.../bindings/clock/nuvoton,wpcm450-clk.yaml | 65 +++
.../arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi | 23 +-
drivers/clk/Makefile | 2 +-
drivers/clk/nuvoton/Kconfig | 10 +-
drivers/clk/nuvoton/Makefile | 1 +
drivers/clk/nuvoton/clk-wpcm450.c | 372 ++++++++++++++++++
.../dt-bindings/clock/nuvoton,wpcm450-clk.h | 67 ++++
7 files changed, 525 insertions(+), 15 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/nuvoton,wpcm450-clk.yaml
create mode 100644 drivers/clk/nuvoton/clk-wpcm450.c
create mode 100644 include/dt-bindings/clock/nuvoton,wpcm450-clk.h
--
2.43.0
The Nuvoton WPCM450 SoC has a combined clock and reset controller.
Add a devicetree binding for it, as well as definitions for the bit
numbers used by it.
Signed-off-by: Jonathan Neuschäfer <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
---
v10:
- no changes
v9:
- Remove clock-output-names in example, because it's now unnecessary due
to driver improvements
v5-v8:
- no changes
v4:
- https://lore.kernel.org/lkml/[email protected]/
- Add R-b tag
v3:
- Change clock-output-names and clock-names from "refclk" to "ref", suggested
by Krzysztof Kozlowski
v2:
- https://lore.kernel.org/lkml/[email protected]/
- Various improvements, suggested by Krzysztof Kozlowski
v1:
- https://lore.kernel.org/lkml/[email protected]/
---
.../bindings/clock/nuvoton,wpcm450-clk.yaml | 65 ++++++++++++++++++
.../dt-bindings/clock/nuvoton,wpcm450-clk.h | 67 +++++++++++++++++++
2 files changed, 132 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/nuvoton,wpcm450-clk.yaml
create mode 100644 include/dt-bindings/clock/nuvoton,wpcm450-clk.h
diff --git a/Documentation/devicetree/bindings/clock/nuvoton,wpcm450-clk.yaml b/Documentation/devicetree/bindings/clock/nuvoton,wpcm450-clk.yaml
new file mode 100644
index 00000000000000..93521cf68a040f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nuvoton,wpcm450-clk.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nuvoton,wpcm450-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton WPCM450 clock controller
+
+maintainers:
+ - Jonathan Neuschäfer <[email protected]>
+
+description:
+ The clock controller of the Nuvoton WPCM450 SoC supplies clocks and resets to
+ the rest of the chip.
+
+properties:
+ compatible:
+ const: nuvoton,wpcm450-clk
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Reference clock oscillator (should be 48 MHz)
+
+ clock-names:
+ items:
+ - const: ref
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#clock-cells'
+
+examples:
+ - |
+ #include <dt-bindings/clock/nuvoton,wpcm450-clk.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ refclk: clock-48mhz {
+ /* 48 MHz reference oscillator */
+ compatible = "fixed-clock";
+ clock-frequency = <48000000>;
+ #clock-cells = <0>;
+ };
+
+ clk: clock-controller@b0000200 {
+ reg = <0xb0000200 0x100>;
+ compatible = "nuvoton,wpcm450-clk";
+ clocks = <&refclk>;
+ clock-names = "ref";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
diff --git a/include/dt-bindings/clock/nuvoton,wpcm450-clk.h b/include/dt-bindings/clock/nuvoton,wpcm450-clk.h
new file mode 100644
index 00000000000000..86e1c895921b71
--- /dev/null
+++ b/include/dt-bindings/clock/nuvoton,wpcm450-clk.h
@@ -0,0 +1,67 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+
+#ifndef _DT_BINDINGS_CLOCK_NUVOTON_WPCM450_CLK_H
+#define _DT_BINDINGS_CLOCK_NUVOTON_WPCM450_CLK_H
+
+/* Clocks based on CLKEN bits */
+#define WPCM450_CLK_FIU 0
+#define WPCM450_CLK_XBUS 1
+#define WPCM450_CLK_KCS 2
+#define WPCM450_CLK_SHM 4
+#define WPCM450_CLK_USB1 5
+#define WPCM450_CLK_EMC0 6
+#define WPCM450_CLK_EMC1 7
+#define WPCM450_CLK_USB0 8
+#define WPCM450_CLK_PECI 9
+#define WPCM450_CLK_AES 10
+#define WPCM450_CLK_UART0 11
+#define WPCM450_CLK_UART1 12
+#define WPCM450_CLK_SMB2 13
+#define WPCM450_CLK_SMB3 14
+#define WPCM450_CLK_SMB4 15
+#define WPCM450_CLK_SMB5 16
+#define WPCM450_CLK_HUART 17
+#define WPCM450_CLK_PWM 18
+#define WPCM450_CLK_TIMER0 19
+#define WPCM450_CLK_TIMER1 20
+#define WPCM450_CLK_TIMER2 21
+#define WPCM450_CLK_TIMER3 22
+#define WPCM450_CLK_TIMER4 23
+#define WPCM450_CLK_MFT0 24
+#define WPCM450_CLK_MFT1 25
+#define WPCM450_CLK_WDT 26
+#define WPCM450_CLK_ADC 27
+#define WPCM450_CLK_SDIO 28
+#define WPCM450_CLK_SSPI 29
+#define WPCM450_CLK_SMB0 30
+#define WPCM450_CLK_SMB1 31
+
+/* Other clocks */
+#define WPCM450_CLK_USBPHY 32
+
+#define WPCM450_NUM_CLKS 33
+
+/* Resets based on IPSRST bits */
+#define WPCM450_RESET_FIU 0
+#define WPCM450_RESET_EMC0 6
+#define WPCM450_RESET_EMC1 7
+#define WPCM450_RESET_USB0 8
+#define WPCM450_RESET_USB1 9
+#define WPCM450_RESET_AES_PECI 10
+#define WPCM450_RESET_UART 11
+#define WPCM450_RESET_MC 12
+#define WPCM450_RESET_SMB2 13
+#define WPCM450_RESET_SMB3 14
+#define WPCM450_RESET_SMB4 15
+#define WPCM450_RESET_SMB5 16
+#define WPCM450_RESET_PWM 18
+#define WPCM450_RESET_TIMER 19
+#define WPCM450_RESET_ADC 27
+#define WPCM450_RESET_SDIO 28
+#define WPCM450_RESET_SSPI 29
+#define WPCM450_RESET_SMB0 30
+#define WPCM450_RESET_SMB1 31
+
+#define WPCM450_NUM_RESETS 32
+
+#endif /* _DT_BINDINGS_CLOCK_NUVOTON_WPCM450_CLK_H */
--
2.43.0
This is not necessary anymore, because the clk-wpcm450 driver doesn't
rely on global clock names anymore.
Signed-off-by: Jonathan Neuschäfer <[email protected]>
---
v10:
- no changes
v9:
- New patch
---
arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
index 6e1f0f164cb4f5..9dfdd8f67319d3 100644
--- a/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
@@ -40,7 +40,6 @@ clk24m: clock-24mhz {
refclk: clock-48mhz {
/* 48 MHz reference oscillator */
compatible = "fixed-clock";
- clock-output-names = "ref";
clock-frequency = <48000000>;
#clock-cells = <0>;
};
--
2.43.0
On 10/03/2024 20:21, Jonathan Neuschäfer wrote:
> This is not necessary anymore, because the clk-wpcm450 driver doesn't
> rely on global clock names anymore.
>
Your commit msg should say: since which commit.
Best regards,
Krzysztof
On Mon, Mar 11, 2024 at 07:50:22AM +0100, Krzysztof Kozlowski wrote:
> On 10/03/2024 20:21, Jonathan Neuschäfer wrote:
> > This is not necessary anymore, because the clk-wpcm450 driver doesn't
> > rely on global clock names anymore.
> >
>
> Your commit msg should say: since which commit.
Good point, I'll do that in the next iteration
This driver implements the following features w.r.t. the clock and reset
controller in the WPCM450 SoC:
- It calculates the rates for all clocks managed by the clock controller
- It leaves the clock tree mostly unchanged, except that it enables/
disables clock gates based on usage.
- It exposes the reset lines managed by the controller using the
Generic Reset Controller subsystem
NOTE: If the driver and the corresponding devicetree node are present,
the driver will disable "unused" clocks. This is problem until
the clock relations are properly declared in the devicetree (in a
later patch). Until then, the clk_ignore_unused kernel parameter
can be used as a workaround.
Signed-off-by: Jonathan Neuschäfer <[email protected]>
Reviewed-by: Joel Stanley <[email protected]>
---
I have considered converting this driver to a platform driver instead of
using CLK_OF_DECLARE, because platform drivers are generally the way
forward. However, the timer-npcm7xx driver used on the same platform
requires is initialized with TIMER_OF_DECLARE and thus requires the
clocks to be available earlier than a platform driver can provide them.
v10:
- select RESET_{CONTROLLER,SIMPLE} from CLK_WPCM450 instead of messing with the 'default' statement
v9:
- Apply comments made by Stephen Boyd
- Move to drivers/clk/nuvoton/ directory
- Update SPDX license identifier from GPL-2.0 to GPL-2.0-only
- Rename clk_np variable to np
- Use of_clk_hw_register
- Refer to clock parents by .fw_name
v8:
- https://lore.kernel.org/lkml/[email protected]/
- Use %pe format specifier throughout the driver, as suggested by Philipp Zabel
- Add Joel's R-b
v7:
- https://lore.kernel.org/lkml/[email protected]/
- Simplify error handling by not deallocating resources
v6:
- Enable RESET_SIMPLE based on ARCH_WPCM450, not ARCH_NPCM, as suggested by Tomer Maimon
v5:
- https://lore.kernel.org/lkml/[email protected]/
- Switch to using clk_parent_data
v4:
- Fix reset controller initialization
v3:
- Change reference clock name from "refclk" to "ref"
- Remove unused variable in return path of wpcm450_clk_register_pll
- Remove unused divisor tables
v2:
- no changes
---
drivers/clk/Makefile | 2 +-
drivers/clk/nuvoton/Kconfig | 10 +-
drivers/clk/nuvoton/Makefile | 1 +
drivers/clk/nuvoton/clk-wpcm450.c | 372 ++++++++++++++++++++++++++++++
4 files changed, 383 insertions(+), 2 deletions(-)
create mode 100644 drivers/clk/nuvoton/clk-wpcm450.c
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 14fa8d4ecc1fbe..cdeb2ecf3a8e99 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -107,7 +107,7 @@ endif
obj-y += mstar/
obj-y += mvebu/
obj-$(CONFIG_ARCH_MXS) += mxs/
-obj-$(CONFIG_ARCH_MA35) += nuvoton/
+obj-y += nuvoton/
obj-$(CONFIG_COMMON_CLK_NXP) += nxp/
obj-$(CONFIG_COMMON_CLK_PISTACHIO) += pistachio/
obj-$(CONFIG_COMMON_CLK_PXA) += pxa/
diff --git a/drivers/clk/nuvoton/Kconfig b/drivers/clk/nuvoton/Kconfig
index fe4b7f62f46704..908881654b2e91 100644
--- a/drivers/clk/nuvoton/Kconfig
+++ b/drivers/clk/nuvoton/Kconfig
@@ -3,7 +3,7 @@
config COMMON_CLK_NUVOTON
bool "Nuvoton clock controller common support"
- depends on ARCH_MA35 || COMPILE_TEST
+ depends on ARCH_MA35 || ARCH_NPCM || COMPILE_TEST
default y
help
Say y here to enable common clock controller for Nuvoton platforms.
@@ -16,4 +16,12 @@ config CLK_MA35D1
help
Build the clock controller driver for MA35D1 SoC.
+config CLK_WPCM450
+ bool "Nuvoton WPCM450 clock/reset controller support"
+ default y
+ select RESET_CONTROLLER
+ select RESET_SIMPLE
+ help
+ Build the clock and reset controller driver for the WPCM450 SoC.
+
endif
diff --git a/drivers/clk/nuvoton/Makefile b/drivers/clk/nuvoton/Makefile
index c3c59dd9f2aaab..b130f0d3889ca0 100644
--- a/drivers/clk/nuvoton/Makefile
+++ b/drivers/clk/nuvoton/Makefile
@@ -2,3 +2,4 @@
obj-$(CONFIG_CLK_MA35D1) += clk-ma35d1.o
obj-$(CONFIG_CLK_MA35D1) += clk-ma35d1-divider.o
obj-$(CONFIG_CLK_MA35D1) += clk-ma35d1-pll.o
+obj-$(CONFIG_CLK_WPCM450) += clk-wpcm450.o
diff --git a/drivers/clk/nuvoton/clk-wpcm450.c b/drivers/clk/nuvoton/clk-wpcm450.c
new file mode 100644
index 00000000000000..9100c4b8a56483
--- /dev/null
+++ b/drivers/clk/nuvoton/clk-wpcm450.c
@@ -0,0 +1,372 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Nuvoton WPCM450 clock and reset controller driver.
+ *
+ * Copyright (C) 2022 Jonathan Neuschäfer <[email protected]>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/bitfield.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/reset-controller.h>
+#include <linux/reset/reset-simple.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/clock/nuvoton,wpcm450-clk.h>
+
+struct wpcm450_clk_pll {
+ struct clk_hw hw;
+ void __iomem *pllcon;
+ u8 flags;
+};
+
+#define to_wpcm450_clk_pll(_hw) container_of(_hw, struct wpcm450_clk_pll, hw)
+
+#define PLLCON_FBDV GENMASK(24, 16)
+#define PLLCON_PRST BIT(13)
+#define PLLCON_PWDEN BIT(12)
+#define PLLCON_OTDV GENMASK(10, 8)
+#define PLLCON_INDV GENMASK(5, 0)
+
+static unsigned long wpcm450_clk_pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct wpcm450_clk_pll *pll = to_wpcm450_clk_pll(hw);
+ unsigned long fbdv, indv, otdv;
+ u64 rate;
+ u32 pllcon;
+
+ if (parent_rate == 0)
+ return 0;
+
+ pllcon = readl_relaxed(pll->pllcon);
+
+ indv = FIELD_GET(PLLCON_INDV, pllcon) + 1;
+ fbdv = FIELD_GET(PLLCON_FBDV, pllcon) + 1;
+ otdv = FIELD_GET(PLLCON_OTDV, pllcon) + 1;
+
+ rate = (u64)parent_rate * fbdv;
+ do_div(rate, indv * otdv);
+
+ return rate;
+}
+
+static int wpcm450_clk_pll_is_enabled(struct clk_hw *hw)
+{
+ struct wpcm450_clk_pll *pll = to_wpcm450_clk_pll(hw);
+ u32 pllcon;
+
+ pllcon = readl_relaxed(pll->pllcon);
+
+ return !(pllcon & PLLCON_PRST);
+}
+
+static void wpcm450_clk_pll_disable(struct clk_hw *hw)
+{
+ struct wpcm450_clk_pll *pll = to_wpcm450_clk_pll(hw);
+ u32 pllcon;
+
+ pllcon = readl_relaxed(pll->pllcon);
+ pllcon |= PLLCON_PRST | PLLCON_PWDEN;
+ writel(pllcon, pll->pllcon);
+}
+
+static const struct clk_ops wpcm450_clk_pll_ops = {
+ .recalc_rate = wpcm450_clk_pll_recalc_rate,
+ .is_enabled = wpcm450_clk_pll_is_enabled,
+ .disable = wpcm450_clk_pll_disable
+};
+
+static struct clk_hw *
+wpcm450_clk_register_pll(struct device_node *np, void __iomem *pllcon, const char *name,
+ const struct clk_parent_data *parent, unsigned long flags)
+{
+ struct wpcm450_clk_pll *pll;
+ struct clk_init_data init = {};
+ int ret;
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &wpcm450_clk_pll_ops;
+ init.parent_data = parent;
+ init.num_parents = 1;
+ init.flags = flags;
+
+ pll->pllcon = pllcon;
+ pll->hw.init = &init;
+
+ ret = of_clk_hw_register(np, &pll->hw);
+ if (ret) {
+ kfree(pll);
+ return ERR_PTR(ret);
+ }
+
+ return &pll->hw;
+}
+
+#define REG_CLKEN 0x00
+#define REG_CLKSEL 0x04
+#define REG_CLKDIV 0x08
+#define REG_PLLCON0 0x0c
+#define REG_PLLCON1 0x10
+#define REG_PMCON 0x14
+#define REG_IRQWAKECON 0x18
+#define REG_IRQWAKEFLAG 0x1c
+#define REG_IPSRST 0x20
+
+struct wpcm450_pll_data {
+ const char *name;
+ struct clk_parent_data parent;
+ unsigned int reg;
+ unsigned long flags;
+};
+
+static const struct wpcm450_pll_data pll_data[] = {
+ { "pll0", { .fw_name = "ref" }, REG_PLLCON0, 0 },
+ { "pll1", { .fw_name = "ref" }, REG_PLLCON1, 0 },
+};
+
+struct wpcm450_clksel_data {
+ const char *name;
+ const struct clk_parent_data *parents;
+ unsigned int num_parents;
+ const u32 *table;
+ int shift;
+ int width;
+ int index;
+ unsigned long flags;
+};
+
+static const u32 parent_table[] = { 0, 1, 2 };
+
+static const struct clk_parent_data default_parents[] = {
+ { .name = "pll0" },
+ { .name = "pll1" },
+ { .name = "ref" },
+};
+
+static const struct clk_parent_data huart_parents[] = {
+ { .fw_name = "ref" },
+ { .name = "refdiv2" },
+};
+
+static const struct wpcm450_clksel_data clksel_data[] = {
+ { "cpusel", default_parents, ARRAY_SIZE(default_parents),
+ parent_table, 0, 2, -1, CLK_IS_CRITICAL },
+ { "clkout", default_parents, ARRAY_SIZE(default_parents),
+ parent_table, 2, 2, -1, 0 },
+ { "usbphy", default_parents, ARRAY_SIZE(default_parents),
+ parent_table, 6, 2, -1, 0 },
+ { "uartsel", default_parents, ARRAY_SIZE(default_parents),
+ parent_table, 8, 2, WPCM450_CLK_USBPHY, 0 },
+ { "huartsel", huart_parents, ARRAY_SIZE(huart_parents),
+ parent_table, 10, 1, -1, 0 },
+};
+
+static const struct clk_div_table div_fixed2[] = {
+ { .val = 0, .div = 2 },
+ { }
+};
+
+struct wpcm450_clkdiv_data {
+ const char *name;
+ struct clk_parent_data parent;
+ int div_flags;
+ const struct clk_div_table *table;
+ int shift;
+ int width;
+ unsigned long flags;
+};
+
+static struct wpcm450_clkdiv_data clkdiv_data_early[] = {
+ { "refdiv2", { .name = "ref" }, 0, div_fixed2, 0, 0 },
+};
+
+static const struct wpcm450_clkdiv_data clkdiv_data[] = {
+ { "cpu", { .name = "cpusel" }, 0, div_fixed2, 0, 0, CLK_IS_CRITICAL },
+ { "adcdiv", { .name = "ref" }, CLK_DIVIDER_POWER_OF_TWO, NULL, 28, 2, 0 },
+ { "apb", { .name = "ahb" }, CLK_DIVIDER_POWER_OF_TWO, NULL, 26, 2, 0 },
+ { "ahb", { .name = "cpu" }, CLK_DIVIDER_POWER_OF_TWO, NULL, 24, 2, 0 },
+ { "uart", { .name = "uartsel" }, 0, NULL, 16, 4, 0 },
+ { "ahb3", { .name = "ahb" }, CLK_DIVIDER_POWER_OF_TWO, NULL, 8, 2, 0 },
+};
+
+struct wpcm450_clken_data {
+ const char *name;
+ struct clk_parent_data parent;
+ int bitnum;
+ unsigned long flags;
+};
+
+static const struct wpcm450_clken_data clken_data[] = {
+ { "fiu", { .name = "ahb3" }, WPCM450_CLK_FIU, 0 },
+ { "xbus", { .name = "ahb3" }, WPCM450_CLK_XBUS, 0 },
+ { "kcs", { .name = "apb" }, WPCM450_CLK_KCS, 0 },
+ { "shm", { .name = "ahb3" }, WPCM450_CLK_SHM, 0 },
+ { "usb1", { .name = "ahb" }, WPCM450_CLK_USB1, 0 },
+ { "emc0", { .name = "ahb" }, WPCM450_CLK_EMC0, 0 },
+ { "emc1", { .name = "ahb" }, WPCM450_CLK_EMC1, 0 },
+ { "usb0", { .name = "ahb" }, WPCM450_CLK_USB0, 0 },
+ { "peci", { .name = "apb" }, WPCM450_CLK_PECI, 0 },
+ { "aes", { .name = "apb" }, WPCM450_CLK_AES, 0 },
+ { "uart0", { .name = "uart" }, WPCM450_CLK_UART0, 0 },
+ { "uart1", { .name = "uart" }, WPCM450_CLK_UART1, 0 },
+ { "smb2", { .name = "apb" }, WPCM450_CLK_SMB2, 0 },
+ { "smb3", { .name = "apb" }, WPCM450_CLK_SMB3, 0 },
+ { "smb4", { .name = "apb" }, WPCM450_CLK_SMB4, 0 },
+ { "smb5", { .name = "apb" }, WPCM450_CLK_SMB5, 0 },
+ { "huart", { .name = "huartsel" }, WPCM450_CLK_HUART, 0 },
+ { "pwm", { .name = "apb" }, WPCM450_CLK_PWM, 0 },
+ { "timer0", { .name = "refdiv2" }, WPCM450_CLK_TIMER0, 0 },
+ { "timer1", { .name = "refdiv2" }, WPCM450_CLK_TIMER1, 0 },
+ { "timer2", { .name = "refdiv2" }, WPCM450_CLK_TIMER2, 0 },
+ { "timer3", { .name = "refdiv2" }, WPCM450_CLK_TIMER3, 0 },
+ { "timer4", { .name = "refdiv2" }, WPCM450_CLK_TIMER4, 0 },
+ { "mft0", { .name = "apb" }, WPCM450_CLK_MFT0, 0 },
+ { "mft1", { .name = "apb" }, WPCM450_CLK_MFT1, 0 },
+ { "wdt", { .name = "refdiv2" }, WPCM450_CLK_WDT, 0 },
+ { "adc", { .name = "adcdiv" }, WPCM450_CLK_ADC, 0 },
+ { "sdio", { .name = "ahb" }, WPCM450_CLK_SDIO, 0 },
+ { "sspi", { .name = "apb" }, WPCM450_CLK_SSPI, 0 },
+ { "smb0", { .name = "apb" }, WPCM450_CLK_SMB0, 0 },
+ { "smb1", { .name = "apb" }, WPCM450_CLK_SMB1, 0 },
+};
+
+static DEFINE_SPINLOCK(wpcm450_clk_lock);
+
+/*
+ * NOTE: Error handling is very rudimentary here. If the clock driver initial-
+ * ization fails, the system is probably in bigger trouble than what is caused
+ * by a few leaked resources.
+ */
+
+static void __init wpcm450_clk_init(struct device_node *np)
+{
+ struct clk_hw_onecell_data *clk_data;
+ static struct clk_hw **hws;
+ static struct clk_hw *hw;
+ void __iomem *clk_base;
+ int i, ret;
+ struct reset_simple_data *reset;
+
+ clk_base = of_iomap(np, 0);
+ if (!clk_base) {
+ pr_err("%pOFP: failed to map registers\n", np);
+ of_node_put(np);
+ return;
+ }
+ of_node_put(np);
+
+ clk_data = kzalloc(struct_size(clk_data, hws, WPCM450_NUM_CLKS), GFP_KERNEL);
+ if (!clk_data)
+ return;
+
+ clk_data->num = WPCM450_NUM_CLKS;
+ hws = clk_data->hws;
+
+ for (i = 0; i < WPCM450_NUM_CLKS; i++)
+ hws[i] = ERR_PTR(-ENOENT);
+
+ /* PLLs */
+ for (i = 0; i < ARRAY_SIZE(pll_data); i++) {
+ const struct wpcm450_pll_data *data = &pll_data[i];
+
+ hw = wpcm450_clk_register_pll(np, clk_base + data->reg, data->name,
+ &data->parent, data->flags);
+ if (IS_ERR(hw)) {
+ pr_info("Failed to register PLL: %pe\n", hw);
+ return;
+ }
+ }
+
+ /* Early divisors (REF/2) */
+ for (i = 0; i < ARRAY_SIZE(clkdiv_data_early); i++) {
+ const struct wpcm450_clkdiv_data *data = &clkdiv_data_early[i];
+
+ hw = clk_hw_register_divider_table_parent_data(NULL, data->name, &data->parent,
+ data->flags, clk_base + REG_CLKDIV,
+ data->shift, data->width,
+ data->div_flags, data->table,
+ &wpcm450_clk_lock);
+ if (IS_ERR(hw)) {
+ pr_err("Failed to register div table: %pe\n", hw);
+ return;
+ }
+ }
+
+ /* Selects/muxes */
+ for (i = 0; i < ARRAY_SIZE(clksel_data); i++) {
+ const struct wpcm450_clksel_data *data = &clksel_data[i];
+
+ hw = clk_hw_register_mux_parent_data(NULL, data->name, data->parents,
+ data->num_parents, data->flags,
+ clk_base + REG_CLKSEL, data->shift,
+ data->width, 0,
+ &wpcm450_clk_lock);
+ if (IS_ERR(hw)) {
+ pr_err("Failed to register mux: %pe\n", hw);
+ return;
+ }
+ if (data->index >= 0)
+ clk_data->hws[data->index] = hw;
+ }
+
+ /* Divisors */
+ for (i = 0; i < ARRAY_SIZE(clkdiv_data); i++) {
+ const struct wpcm450_clkdiv_data *data = &clkdiv_data[i];
+
+ hw = clk_hw_register_divider_table_parent_data(NULL, data->name, &data->parent,
+ data->flags, clk_base + REG_CLKDIV,
+ data->shift, data->width,
+ data->div_flags, data->table,
+ &wpcm450_clk_lock);
+ if (IS_ERR(hw)) {
+ pr_err("Failed to register divider: %pe\n", hw);
+ return;
+ }
+ }
+
+ /* Enables/gates */
+ for (i = 0; i < ARRAY_SIZE(clken_data); i++) {
+ const struct wpcm450_clken_data *data = &clken_data[i];
+
+ hw = clk_hw_register_gate_parent_data(NULL, data->name, &data->parent, data->flags,
+ clk_base + REG_CLKEN, data->bitnum,
+ data->flags, &wpcm450_clk_lock);
+ if (IS_ERR(hw)) {
+ pr_err("Failed to register gate: %pe\n", hw);
+ return;
+ }
+ clk_data->hws[data->bitnum] = hw;
+ }
+
+ ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_data);
+ if (ret)
+ pr_err("Failed to add DT provider: %pe\n", ERR_PTR(ret));
+
+ /* Reset controller */
+ reset = kzalloc(sizeof(*reset), GFP_KERNEL);
+ if (!reset)
+ return;
+ reset->rcdev.owner = THIS_MODULE;
+ reset->rcdev.nr_resets = WPCM450_NUM_RESETS;
+ reset->rcdev.ops = &reset_simple_ops;
+ reset->rcdev.of_node = np;
+ reset->membase = clk_base + REG_IPSRST;
+ ret = reset_controller_register(&reset->rcdev);
+ if (ret)
+ pr_err("Failed to register reset controller: %pe\n", ERR_PTR(ret));
+
+ of_node_put(np);
+}
+
+CLK_OF_DECLARE(wpcm450_clk_init, "nuvoton,wpcm450-clk", wpcm450_clk_init);
--
2.43.0
This change is incompatible with older kernels because it requires the
clock controller driver, but I think that's acceptable because WPCM450
support is generally still in an early phase.
Signed-off-by: Jonathan Neuschäfer <[email protected]>
---
It's probably best to delay merging of this patch until after the driver
is merged; I'm including it here for review, and in case someone want's
to set up a shared branch between the clock and devicetree parts.
v10:
- Reintroducing this patch as part of the clock/reset controller series
---
.../arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi | 22 +++++++++----------
1 file changed, 10 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
index 9dfdd8f67319d3..7e3ea8b31151b3 100644
--- a/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
@@ -2,6 +2,7 @@
// Copyright 2021 Jonathan Neuschäfer
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/nuvoton,wpcm450-clk.h>
/ {
compatible = "nuvoton,wpcm450";
@@ -30,13 +31,6 @@ cpu@0 {
};
};
- clk24m: clock-24mhz {
- /* 24 MHz dummy clock */
- compatible = "fixed-clock";
- clock-frequency = <24000000>;
- #clock-cells = <0>;
- };
-
refclk: clock-48mhz {
/* 48 MHz reference oscillator */
compatible = "fixed-clock";
@@ -70,7 +64,7 @@ serial0: serial@b8000000 {
reg = <0xb8000000 0x20>;
reg-shift = <2>;
interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk24m>;
+ clocks = <&clk WPCM450_CLK_UART0>;
pinctrl-names = "default";
pinctrl-0 = <&bsp_pins>;
status = "disabled";
@@ -81,7 +75,7 @@ serial1: serial@b8000100 {
reg = <0xb8000100 0x20>;
reg-shift = <2>;
interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk24m>;
+ clocks = <&clk WPCM450_CLK_UART1>;
status = "disabled";
};
@@ -89,14 +83,18 @@ timer0: timer@b8001000 {
compatible = "nuvoton,wpcm450-timer";
interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xb8001000 0x1c>;
- clocks = <&clk24m>;
+ clocks = <&clk WPCM450_CLK_TIMER0>,
+ <&clk WPCM450_CLK_TIMER1>,
+ <&clk WPCM450_CLK_TIMER2>,
+ <&clk WPCM450_CLK_TIMER3>,
+ <&clk WPCM450_CLK_TIMER4>;
};
watchdog0: watchdog@b800101c {
compatible = "nuvoton,wpcm450-wdt";
interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xb800101c 0x4>;
- clocks = <&clk24m>;
+ clocks = <&clk WPCM450_CLK_WDT>;
};
aic: interrupt-controller@b8002000 {
@@ -480,7 +478,7 @@ fiu: spi-controller@c8000000 {
#size-cells = <0>;
reg = <0xc8000000 0x1000>, <0xc0000000 0x4000000>;
reg-names = "control", "memory";
- clocks = <&clk 0>;
+ clocks = <&clk WPCM450_CLK_FIU>;
nuvoton,shm = <&shm>;
status = "disabled";
};
--
2.43.0