Changelog:
- v6
- Revise i2c duty-cycle for meeting 400khz spec
- v5
- Support medusa board adc sensors
- support NIC eeprom
- v4
- Re-format gpio linename
- Revise i2c device node names
- Split patches by logic changes
- v3
- Correct patch for revising gpio name
- v2
- Revise mx31790 fan tach config
- Add mctp config for NIC
- Support mux to cpld
- Revise gpio name
- v1
- Add gpio and eeprom behind i2c-mux
- Remove redundant idle-state setting for i2c-mux
- Enable adc 15, wdt2,spi gpio for yosemite4 use
- Revise quad mode to dual mode to avoid WP pin influnece the SPI
- Revise power sensor adm1281 for yosemite4 schematic change
- Add gpio pca9506 I/O expander for yosemite4 use
- remove space for adm1272 compatible
- enable interrupt setting for pca9555
- add eeprom for yosemite4 medusa board/BSM use
- remove temperature sensor for yosemite4 schematic change
- add power sensor for power module reading
- Revise adc128d818 adc mode for yosemite4 schematic change
- Revise ina233 for yosemite4 schematic change
- Remove idle state setting for yosemite4 NIC connection
- Initialize bmc gpio state
- Revise mx31790 fan tach config
- Add mctp config for NIC
- Support mux to cpld
- Revise gpio name
Delphine CC Chiu (22):
ARM: dts: aspeed: yosemite4: Revise i2c-mux devices
ARM: dts: aspeed: yosemite4: Enable adc15
ARM: dts: aspeed: yosemite4: Enable spi-gpio setting
ARM: dts: aspeed: yosemite4: Enable watchdog2
ARM: dts: aspeed: yosemite4: Revise quad mode to dual mode
ARM: dts: aspeed: yosemite4: Revise power sensor adm1281 for schematic
change
ARM: dts: aspeed: yosemite4: Add gpio pca9506
ARM: dts: aspeed: yosemite4: Remove space for adm1272 compatible
ARM: dts: aspeed: yosemite4: Enable interrupt setting for pca9555
ARM: dts: aspeed: yosemite4: Add power sensor for power module reading
ARM: dts: aspeed: yosemite4: Add eeprom for yosemite4 use
ARM: dts: aspeed: yosemite4: Remove temperature sensor for yosemite4
schematic change
ARM: dts: aspeed: yosemite4: Revise adc128d818 adc mode for yosemite4
schematic change
ARM: dts: aspeed: yosemite4: Revise ina233 config for yosemite4
schematic change
ARM: dts: aspeed: yosemite4: Remove idle state setting for yosemite4
NIC connection
ARM: dts: aspeed: yosemite4: Initialize bmc gpio state
ARM: dts: aspeed: yosemite4: Revise mx31790 fan tach config
ARM: dts: aspeed: yosemite4: add mctp config for NIC
ARM: dts: aspeed: yosemite4: support mux to cpld
ARM: dts: aspeed: yosemite4: support medusa board adc sensors
ARM: dts: aspeed: yosemite4: support NIC eeprom
ARM: dts: aspeed: yosemite4: Revise i2c duty-cycle
.../aspeed/aspeed-bmc-facebook-yosemite4.dts | 1258 +++++++++++++++--
1 file changed, 1151 insertions(+), 107 deletions(-)
--
2.25.1
Enable Yosemite 4 adc15 config
Signed-off-by: Delphine CC Chiu <[email protected]>
---
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index dac58d3ea63c..6846aab893ad 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -51,7 +51,7 @@ iio-hwmon {
compatible = "iio-hwmon";
io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
- <&adc1 0>, <&adc1 1>;
+ <&adc1 0>, <&adc1 1>, <&adc1 7>;
};
};
@@ -920,10 +920,10 @@ &pinctrl_adc4_default &pinctrl_adc5_default
&adc1 {
ref_voltage = <2500>;
status = "okay";
- pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default>;
+ pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+ &pinctrl_adc15_default>;
};
-
&ehci0 {
status = "okay";
};
--
2.25.1
enable spi-gpio setting for spi flash
Signed-off-by: Delphine CC Chiu <[email protected]>
---
.../aspeed/aspeed-bmc-facebook-yosemite4.dts | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index 6846aab893ad..ea8fd3ec0982 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -53,6 +53,24 @@ iio-hwmon {
<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
<&adc1 0>, <&adc1 1>, <&adc1 7>;
};
+
+ spi_gpio: spi-gpio {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-sck = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
+ gpio-mosi = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
+ gpio-miso = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
+ num-chipselects = <1>;
+ cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
+
+ tpmdev@0 {
+ compatible = "tcg,tpm_tis-spi";
+ spi-max-frequency = <33000000>;
+ reg = <0>;
+ };
+ };
};
&uart1 {
--
2.25.1
enable watchdog2 setting
Signed-off-by: Delphine CC Chiu <[email protected]>
---
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index ea8fd3ec0982..f8bfdefbefc6 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -120,6 +120,13 @@ &wdt1 {
aspeed,ext-pulse-duration = <256>;
};
+&wdt2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdtrst2_default>;
+ aspeed,reset-type = "system";
+};
+
&mac2 {
status = "okay";
pinctrl-names = "default";
--
2.25.1
Revise quad mode to dual mode to avoid WP pin influnece the SPI
Signed-off-by: Delphine CC Chiu <[email protected]>
---
.../arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index f8bfdefbefc6..23006dca5f26 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -149,15 +149,17 @@ flash@0 {
status = "okay";
m25p,fast-read;
label = "bmc";
- spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <2>;
+ spi-rx-bus-width = <2>;
spi-max-frequency = <50000000>;
-#include "openbmc-flash-layout-64.dtsi"
+#include "openbmc-flash-layout-128.dtsi"
};
flash@1 {
status = "okay";
m25p,fast-read;
label = "bmc2";
- spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <2>;
+ spi-rx-bus-width = <2>;
spi-max-frequency = <50000000>;
};
};
--
2.25.1
Revise power sensor adm1281 for yosemite4 schematic change
Signed-off-by: Delphine CC Chiu <[email protected]>
---
.../aspeed/aspeed-bmc-facebook-yosemite4.dts | 24 ++++++++++++-------
1 file changed, 16 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index 23006dca5f26..af9f7067c57c 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -176,8 +176,9 @@ mctp@10 {
};
power-sensor@40 {
- compatible = "adi,adm1278";
+ compatible = "adi,adm1281";
reg = <0x40>;
+ shunt-resistor-micro-ohms = <500>;
};
};
@@ -193,8 +194,9 @@ mctp@10 {
};
power-sensor@40 {
- compatible = "adi,adm1278";
+ compatible = "adi,adm1281";
reg = <0x40>;
+ shunt-resistor-micro-ohms = <500>;
};
};
@@ -210,8 +212,9 @@ mctp@10 {
};
power-sensor@40 {
- compatible = "adi,adm1278";
+ compatible = "adi,adm1281";
reg = <0x40>;
+ shunt-resistor-micro-ohms = <500>;
};
};
@@ -227,8 +230,9 @@ mctp@10 {
};
power-sensor@40 {
- compatible = "adi,adm1278";
+ compatible = "adi,adm1281";
reg = <0x40>;
+ shunt-resistor-micro-ohms = <500>;
};
};
@@ -244,8 +248,9 @@ mctp@10 {
};
power-sensor@40 {
- compatible = "adi,adm1278";
+ compatible = "adi,adm1281";
reg = <0x40>;
+ shunt-resistor-micro-ohms = <500>;
};
};
@@ -261,8 +266,9 @@ mctp@10 {
};
power-sensor@40 {
- compatible = "adi,adm1278";
+ compatible = "adi,adm1281";
reg = <0x40>;
+ shunt-resistor-micro-ohms = <500>;
};
};
@@ -278,8 +284,9 @@ mctp@10 {
};
power-sensor@40 {
- compatible = "adi,adm1278";
+ compatible = "adi,adm1281";
reg = <0x40>;
+ shunt-resistor-micro-ohms = <500>;
};
};
@@ -295,8 +302,9 @@ mctp@10 {
};
power-sensor@40 {
- compatible = "adi,adm1278";
+ compatible = "adi,adm1281";
reg = <0x40>;
+ shunt-resistor-micro-ohms = <500>;
};
};
--
2.25.1
Add gpio pca9506 I/O expander for yv4 use
Signed-off-by: Delphine CC Chiu <[email protected]>
---
.../aspeed/aspeed-bmc-facebook-yosemite4.dts | 251 ++++++++++++++++++
1 file changed, 251 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index af9f7067c57c..b1775b5a6782 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -175,6 +175,34 @@ mctp@10 {
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
};
+ gpio@20 {
+ compatible = "nxp,pca9506";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@21 {
+ compatible = "nxp,pca9506";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@22 {
+ compatible = "nxp,pca9506";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@23 {
+ compatible = "nxp,pca9506";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
power-sensor@40 {
compatible = "adi,adm1281";
reg = <0x40>;
@@ -193,6 +221,34 @@ mctp@10 {
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
};
+ gpio@20 {
+ compatible = "nxp,pca9506";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@21 {
+ compatible = "nxp,pca9506";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@22 {
+ compatible = "nxp,pca9506";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@23 {
+ compatible = "nxp,pca9506";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
power-sensor@40 {
compatible = "adi,adm1281";
reg = <0x40>;
@@ -211,6 +267,34 @@ mctp@10 {
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
};
+ gpio@20 {
+ compatible = "nxp,pca9506";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@21 {
+ compatible = "nxp,pca9506";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@22 {
+ compatible = "nxp,pca9506";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@23 {
+ compatible = "nxp,pca9506";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
power-sensor@40 {
compatible = "adi,adm1281";
reg = <0x40>;
@@ -229,6 +313,34 @@ mctp@10 {
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
};
+ gpio@20 {
+ compatible = "nxp,pca9506";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@21 {
+ compatible = "nxp,pca9506";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@22 {
+ compatible = "nxp,pca9506";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@23 {
+ compatible = "nxp,pca9506";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
power-sensor@40 {
compatible = "adi,adm1281";
reg = <0x40>;
@@ -247,6 +359,34 @@ mctp@10 {
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
};
+ gpio@20 {
+ compatible = "nxp,pca9506";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@21 {
+ compatible = "nxp,pca9506";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@22 {
+ compatible = "nxp,pca9506";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@23 {
+ compatible = "nxp,pca9506";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
power-sensor@40 {
compatible = "adi,adm1281";
reg = <0x40>;
@@ -265,6 +405,34 @@ mctp@10 {
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
};
+ gpio@20 {
+ compatible = "nxp,pca9506";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@21 {
+ compatible = "nxp,pca9506";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@22 {
+ compatible = "nxp,pca9506";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@23 {
+ compatible = "nxp,pca9506";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
power-sensor@40 {
compatible = "adi,adm1281";
reg = <0x40>;
@@ -283,6 +451,34 @@ mctp@10 {
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
};
+ gpio@20 {
+ compatible = "nxp,pca9506";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@21 {
+ compatible = "nxp,pca9506";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@22 {
+ compatible = "nxp,pca9506";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@23 {
+ compatible = "nxp,pca9506";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
power-sensor@40 {
compatible = "adi,adm1281";
reg = <0x40>;
@@ -301,6 +497,34 @@ mctp@10 {
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
};
+ gpio@20 {
+ compatible = "nxp,pca9506";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@21 {
+ compatible = "nxp,pca9506";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@22 {
+ compatible = "nxp,pca9506";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@23 {
+ compatible = "nxp,pca9506";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
power-sensor@40 {
compatible = "adi,adm1281";
reg = <0x40>;
@@ -683,6 +907,33 @@ rtc@6f {
&i2c13 {
status = "okay";
bus-frequency = <400000>;
+ gpio@20 {
+ compatible = "nxp,pca9506";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@21 {
+ compatible = "nxp,pca9506";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@22 {
+ compatible = "nxp,pca9506";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@23 {
+ compatible = "nxp,pca9506";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
&i2c14 {
--
2.25.1
Remove space for adm1272 compatible
Signed-off-by: Delphine CC Chiu <[email protected]>
---
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index b1775b5a6782..cbf385e72e57 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -821,12 +821,12 @@ imux29: i2c@1 {
&i2c11 {
status = "okay";
power-sensor@10 {
- compatible = "adi, adm1272";
+ compatible = "adi,adm1272";
reg = <0x10>;
};
power-sensor@12 {
- compatible = "adi, adm1272";
+ compatible = "adi,adm1272";
reg = <0x12>;
};
--
2.25.1
Enable interrupt setting for pca9555
Signed-off-by: Delphine CC Chiu <[email protected]>
---
Changelog:
- v4
- Revise device node name
- v1
- enable interrupt setting for pca9555
---
.../aspeed/aspeed-bmc-facebook-yosemite4.dts | 56 +++++++++++++++++--
1 file changed, 52 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index cbf385e72e57..4b23e467690f 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -832,30 +832,78 @@ power-sensor@12 {
gpio@20 {
compatible = "nxp,pca9555";
- reg = <0x20>;
+ pinctrl-names = "default";
gpio-controller;
#gpio-cells = <2>;
+ reg = <0x20>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
+ gpio-line-names =
+ "P48V-OCP-GPIO1","P48V-OCP-GPIO2",
+ "P48V-OCP-GPIO3","FAN-BOARD-0-REVISION-0-R",
+ "FAN-BOARD-0-REVISION-1-R","FAN-BOARD-1-REVISION-0-R",
+ "FAN-BOARD-1-REVISION-1-R","RST-MUX-R-N",
+ "RST-LED-CONTROL-FAN-BOARD-0-N","RST-LED-CONTROL-FAN-BOARD-1-N",
+ "RST-IOEXP-FAN-BOARD-0-N","RST-IOEXP-FAN-BOARD-1-N",
+ "PWRGD-LOAD-SWITCH-FAN-BOARD-0-R","PWRGD-LOAD-SWITCH-FAN-BOARD-1-R",
+ "","";
};
gpio@21 {
compatible = "nxp,pca9555";
- reg = <0x21>;
+ pinctrl-names = "default";
gpio-controller;
#gpio-cells = <2>;
+ reg = <0x21>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
+ gpio-line-names =
+ "HSC-OCP-SLOT-ODD-GPIO1","HSC-OCP-SLOT-ODD-GPIO2",
+ "HSC-OCP-SLOT-ODD-GPIO3","HSC-OCP-SLOT-EVEN-GPIO1",
+ "HSC-OCP-SLOT-EVEN-GPIO2","HSC-OCP-SLOT-EVEN-GPIO3",
+ "ADC-TYPE-0-R","ADC-TYPE-1-R",
+ "MEDUSA-BOARD-REV-0","MEDUSA-BOARD-REV-1",
+ "MEDUSA-BOARD-REV-2","MEDUSA-BOARD-TYPE",
+ "DELTA-MODULE-TYPE","P12V-HSC-TYPE",
+ "","";
};
gpio@22 {
compatible = "nxp,pca9555";
- reg = <0x22>;
+ pinctrl-names = "default";
gpio-controller;
#gpio-cells = <2>;
+ reg = <0x22>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
+ gpio-line-names =
+ "CARD-TYPE-SLOT1","CARD-TYPE-SLOT2",
+ "CARD-TYPE-SLOT3","CARD-TYPE-SLOT4",
+ "CARD-TYPE-SLOT5","CARD-TYPE-SLOT6",
+ "CARD-TYPE-SLOT7","CARD-TYPE-SLOT8",
+ "OC-P48V-HSC-0-N","FLT-P48V-HSC-0-N",
+ "OC-P48V-HSC-1-N","FLT-P48V-HSC-1-N",
+ "EN-P48V-AUX-0","EN-P48V-AUX-1",
+ "PWRGD-P12V-AUX-0","PWRGD-P12V-AUX-1";
};
gpio@23 {
compatible = "nxp,pca9555";
- reg = <0x23>;
+ pinctrl-names = "default";
gpio-controller;
#gpio-cells = <2>;
+ reg = <0x23>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
+ gpio-line-names =
+ "HSC1-ALERT1-R-N","HSC2-ALERT1-R-N",
+ "HSC3-ALERT1-R-N","HSC4-ALERT1-R-N",
+ "HSC5-ALERT1-R-N","HSC6-ALERT1-R-N",
+ "HSC7-ALERT1-R-N","HSC8-ALERT1-R-N",
+ "HSC1-ALERT2-R-N","HSC2-ALERT2-R-N",
+ "HSC3-ALERT2-R-N","HSC4-ALERT2-R-N",
+ "HSC5-ALERT2-R-N","HSC6-ALERT2-R-N",
+ "HSC7-ALERT2-R-N","HSC8-ALERT2-R-N";
};
temperature-sensor@48 {
--
2.25.1
Add power sensor for power module reading
Signed-off-by: Delphine CC Chiu <[email protected]>
---
.../aspeed/aspeed-bmc-facebook-yosemite4.dts | 25 +++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index 4b23e467690f..e8d7eb7ff568 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -906,6 +906,11 @@ gpio@23 {
"HSC7-ALERT2-R-N","HSC8-ALERT2-R-N";
};
+ power-sensor@40 {
+ compatible = "mps,mp5023";
+ reg = <0x40>;
+ };
+
temperature-sensor@48 {
compatible = "ti,tmp75";
reg = <0x48>;
@@ -930,6 +935,26 @@ eeprom@54 {
compatible = "atmel,24c256";
reg = <0x54>;
};
+
+ power-sensor@62 {
+ compatible = "pmbus";
+ reg = <0x62>;
+ };
+
+ power-sensor@64 {
+ compatible = "pmbus";
+ reg = <0x64>;
+ };
+
+ power-sensor@65 {
+ compatible = "pmbus";
+ reg = <0x65>;
+ };
+
+ power-sensor@68 {
+ compatible = "pmbus";
+ reg = <0x68>;
+ };
};
&i2c12 {
--
2.25.1
Add eeprom for yosemite4 use
Signed-off-by: Delphine CC Chiu <[email protected]>
---
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index e8d7eb7ff568..f00df378a371 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -932,7 +932,7 @@ temperature-sensor@4b {
};
eeprom@54 {
- compatible = "atmel,24c256";
+ compatible = "atmel,24c128";
reg = <0x54>;
};
@@ -971,6 +971,11 @@ eeprom@50 {
reg = <0x50>;
};
+ eeprom@54 {
+ compatible = "atmel,24c64";
+ reg = <0x54>;
+ };
+
rtc@6f {
compatible = "nuvoton,nct3018y";
reg = <0x6f>;
--
2.25.1
Remove temperature sensor for yosemite4 schematic change
Signed-off-by: Delphine CC Chiu <[email protected]>
---
.../boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts | 10 ----------
1 file changed, 10 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index f00df378a371..bb4cba8f057e 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -921,16 +921,6 @@ temperature-sensor@49 {
reg = <0x49>;
};
- temperature-sensor@4a {
- compatible = "ti,tmp75";
- reg = <0x4a>;
- };
-
- temperature-sensor@4b {
- compatible = "ti,tmp75";
- reg = <0x4b>;
- };
-
eeprom@54 {
compatible = "atmel,24c128";
reg = <0x54>;
--
2.25.1
Revise ina233 config for yosemite4 schematic change
Signed-off-by: Delphine CC Chiu <[email protected]>
---
.../aspeed/aspeed-bmc-facebook-yosemite4.dts | 20 ++++++++++++++-----
1 file changed, 15 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index 4cf4b0ca1024..f0e93c74003a 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -1026,28 +1026,38 @@ adc@37 {
};
power-sensor@40 {
- compatible = "ti,ina230";
+ compatible = "ti,ina233";
reg = <0x40>;
+ resistor-calibration = /bits/ 16 <0x0a00>;
+ current-lsb= /bits/ 16 <0x0001>;
};
power-sensor@41 {
- compatible = "ti,ina230";
+ compatible = "ti,ina233";
reg = <0x41>;
+ resistor-calibration = /bits/ 16 <0x0a00>;
+ current-lsb= /bits/ 16 <0x0001>;
};
power-sensor@42 {
- compatible = "ti,ina230";
+ compatible = "ti,ina233";
reg = <0x42>;
+ resistor-calibration = /bits/ 16 <0x0a00>;
+ current-lsb= /bits/ 16 <0x0001>;
};
power-sensor@43 {
- compatible = "ti,ina230";
+ compatible = "ti,ina233";
reg = <0x43>;
+ resistor-calibration = /bits/ 16 <0x0a00>;
+ current-lsb= /bits/ 16 <0x0001>;
};
power-sensor@44 {
- compatible = "ti,ina230";
+ compatible = "ti,ina233";
reg = <0x44>;
+ resistor-calibration = /bits/ 16 <0x0a00>;
+ current-lsb= /bits/ 16 <0x0001>;
};
temperature-sensor@4e {
--
2.25.1
Revise adc128d818 adc mode for yosemite4 schematic change
Signed-off-by: Delphine CC Chiu <[email protected]>
---
.../boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index bb4cba8f057e..4cf4b0ca1024 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -1010,19 +1010,19 @@ &i2c14 {
adc@1d {
compatible = "ti,adc128d818";
reg = <0x1d>;
- ti,mode = /bits/ 8 <2>;
+ ti,mode = /bits/ 8 <1>;
};
- adc@35 {
+ adc@36 {
compatible = "ti,adc128d818";
- reg = <0x35>;
- ti,mode = /bits/ 8 <2>;
+ reg = <0x36>;
+ ti,mode = /bits/ 8 <1>;
};
adc@37 {
compatible = "ti,adc128d818";
reg = <0x37>;
- ti,mode = /bits/ 8 <2>;
+ ti,mode = /bits/ 8 <1>;
};
power-sensor@40 {
--
2.25.1
Initialize bmc gpio state
Signed-off-by: Delphine CC Chiu <[email protected]>
---
Changelog:
- v4
- Rename gpio-line-names
- v3
- Add patch for revising gpio name
---
.../aspeed/aspeed-bmc-facebook-yosemite4.dts | 235 ++++++++++++++++++
1 file changed, 235 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index 6d5710e5753c..1b91821b019d 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -1271,6 +1271,7 @@ temperature-sensor@1f {
};
};
+
&adc0 {
ref_voltage = <2500>;
status = "okay";
@@ -1298,3 +1299,237 @@ &ehci1 {
&uhci {
status = "okay";
};
+
+&sgpiom0 {
+ status = "okay";
+ ngpios = <128>;
+ bus-frequency = <48000>;
+};
+
+&pinctrl {
+ pinctrl_gpio0_unbiased: gpio0_unbiased {
+ /* GPIOB0, GPIOB1 */
+ pins = "J26", "K23";
+ bias-disable;
+ };
+ pinctrl_gpio2_unbiased: gpio2_unbiased {
+ /* GPIOI5, GPIOI6, GPIOI7,
+ GPIOL6 */
+ pins = "E16", "B16", "A15", "B14";
+ bias-disable;
+ };
+ pinctrl_gpio3_unbiased: gpio3_unbiased {
+ /* GPIOM2, GPIOM3, GPIOM4, GPIOM5,
+ GPION0, GPION1, GPION2, GPION3, GPION5,
+ GPIOO0, GPIOO1, GPIOO2, GPIOO3,
+ GPIOP0, GPIOP1, GPIOP2, GPIOP3, GPIOP4, GPIOP5, GPIOP6 */
+ pins = "A12", "E14", "B12", "C12", "P25", "N23", "N25", "N24", "M23", "AD26", "AD22", "AD23", "AD24", "AB22", "W24", "AA23", "AA24", "W23", "AB23", "AB24";
+ bias-disable;
+ };
+ pinctrl_gpio4_unbiased: gpio4_unbiased {
+ /* GPIOR0, GPIOR1, GPIOR2, GPIOR3, GPIOR4, GPIOR5, GPIOR6, GPIOR7
+ GPIOS0, GPIOS1, GPIOS2, GPIOS3, GPIOS5, GPIOS6, GPIOS7 */
+ pins = "V25", "U24", "V24", "V26", "U25", "T23", "W26", "U26", "R23", "T25", "T26", "R24", "P24", "P23", "T24";
+ bias-disable;
+ };
+ pinctrl_gpio5_unbiased: gpio5_unbiased {
+ /* GPIOV0, GPIOV1, GPIOV2, GPIOV3, GPIOV4, GPIOV5, GPIOV6, GPIOV7
+ GPIOX1, GPIOX2 */
+ pins = "AB15", "AF14", "AD14", "AC15", "AE15", "AE14", "AD15", "AF15", "AA9", "AC9";
+ bias-disable;
+ };
+ pinctrl_gpio6_unbiased: gpio6_unbiased {
+ /* GPIOY2, GPIOY5, GPIOY6
+ GPIOZ0, GPIOZ1, GPIOZ3, GPIOZ4 */
+ pins = "AE11", "AF12", "AC12", "AC10", "AD10", "AB11", "AC11";
+ bias-disable;
+ };
+};
+
+&gpio0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpiu2_default &pinctrl_gpiu3_default
+ &pinctrl_gpiu4_default &pinctrl_gpiu6_default
+ &pinctrl_gpio0_unbiased &pinctrl_gpio2_unbiased
+ &pinctrl_gpio3_unbiased &pinctrl_gpio4_unbiased
+ &pinctrl_gpio5_unbiased &pinctrl_gpio6_unbiased>;
+ gpio-line-names =
+ /*A0-A7*/ "","","","","","","","",
+ /*B0-B7*/ "FLT-HSC-SERVER-SLOT8-N","AC-ON-OFF-BTN-CPLD-SLOT5-N",
+ "PWRGD-SLOT1-STBY","PWRGD-SLOT2-STBY",
+ "PWRGD-SLOT3-STBY","PWRGD-SLOT4-STBY","","",
+ /*C0-C7*/ "","","","","FM-NIC0-WAKE-N",
+ "FM-NIC1-WAKE-N","","RST-PCIE-SLOT2-N",
+ /*D0-D7*/ "","","","","","","","",
+ /*E0-E7*/ "PRSNT-NIC1-N","PRSNT-NIC2-N","","RST-PCIE-SLOT1-N",
+ "","","","",
+ /*F0-F7*/ "FM-RESBTN-SLOT1-BMC-N","FM-RESBTN-SLOT2-BMC-N",
+ "FM-RESBTN-SLOT3-BMC-N","FM-RESBTN-SLOT4-BMC-N",
+ "PRSNT-SB-SLOT1-N","PRSNT-SB-SLOT2-N",
+ "PRSNT-SB-SLOT3-N","PRSNT-SB-SLOT4-N",
+ /*G0-G7*/ "","","","","","","","",
+ /*H0-H7*/ "","","","","","","","",
+ /*I0-I7*/ "","","","","","ALT-MEDUSA-ADC-N",
+ "ALT-SMB-BMC-CPLD2-N",
+ "INT-SPIDER-ADC-R-N",
+ /*J0-J7*/ "","","","","","","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","","","","ALT-MEDUSA-P12V-EFUSE-N","",
+ /*M0-M7*/ "EN-NIC0-POWER-BMC-R","EN-NIC1-POWER-BMC-R",
+ "INT-MEDUSA-IOEXP-TEMP-N","PRSNT-NIC3-N",
+ "INT-SMB-BMC-SLOT1-4-BMC-N",
+ "AC-ON-OFF-BTN-CPLD-SLOT6-N","","",
+ /*N0-N7*/ "FLT-HSC-SERVER-SLOT1-N","FLT-HSC-SERVER-SLOT2-N",
+ "FLT-HSC-SERVER-SLOT3-N","FLT-HSC-SERVER-SLOT4-N",
+ "FM-BMC-READY-R2","RST-SMB-NIC0-R-N","","",
+ /*O0-O7*/ "AC-ON-OFF-BTN-CPLD-SLOT8-N","RST-SMB-NIC1-R-N",
+ "RST-SMB-NIC2-R-N","RST-SMB-NIC3-R-N",
+ "","","","",
+ /*P0-P7*/ "ALT-SMB-BMC-CPLD1-N","'BTN-BMC-R2-N",
+ "EN-P3V-BAT-SCALED-R","PWRGD-P5V-USB-BMC",
+ "FM-BMC-RTCRST-R","RST-USB-HUB-R-N",
+ "FLAG-P5V-USB-BMC-N","",
+ /*Q0-Q7*/ "AC-ON-OFF-BTN-CPLD-SLOT1-N","AC-ON-OFF-BTN-CPLD-SLOT2-N",
+ "AC-ON-OFF-BTN-CPLD-SLOT3-N","AC-ON-OFF-BTN-CPLD-SLOT4-N",
+ "PRSNT-SB-SLOT5-N","PRSNT-SB-SLOT6-N",
+ "PRSNT-SB-SLOT7-N","PRSNT-SB-SLOT8-N",
+ /*R0-R7*/ "AC-ON-OFF-BTN-CPLD-SLOT7-N","INT-SMB-BMC-SLOT5-8-BMC-N",
+ "FM-PWRBRK-NIC-BMC-R2","RST-PCIE-SLOT4-N",
+ "RST-PCIE-SLOT5-N","RST-PCIE-SLOT6-N",
+ "RST-PCIE-SLOT7-N","RST-PCIE-SLOT8-N",
+ /*S0-S7*/ "FM-NIC2-WAKE-N","FM-NIC3-WAKE-N",
+ "EN-NIC3-POWER-BMC-R","SEL-BMC-JTAG-MUX-R",
+ "","ALT-P12V-AUX-N","FAST-PROCHOT-N",
+ "SPI-WP-DISABLE-STATUS-R-N",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "","","RST-PCIE-SLOT3-N","",
+ "","PRSNT-NIC0-N","","",
+ /*V0-V7*/ "FM-RESBTN-SLOT5-BMC-N","FM-RESBTN-SLOT6-BMC-N",
+ "FM-RESBTN-SLOT7-BMC-N","FM-RESBTN-SLOT8-BMC-N",
+ "","","","",
+ /*W0-W7*/ "PRSNT-TPM-BMC-N","PRSNT-OCP-DEBUG-BMC-N","ALT-TEMP-BMC-N","ALT-RTC-BMC-N",
+ "","","","",
+ /*X0-X7*/ "","LT-HSC-SERVER-SLOT6-N","FLT-HSC-SERVER-SLOT7-N","","","",
+ "PWRGD-SLOT5-STBY","PWRGD-SLOT6-STBY",
+ /*Y0-Y7*/ "","","SPI-LOCK-REQ-BMC-N","PWRGD-SLOT7-STBY",
+ "","","EN-NIC2-POWER-BMC-R","",
+ /*Z0-Z7*/ "EN-P5V-USB-CPLD-R","'FLT-HSC-SERVER-SLOT5-N",
+ "PWRGD-SLOT8-STBY","","","","","";
+
+ pin_gpio_b4 {
+ gpios = <ASPEED_GPIO(B, 4) GPIO_ACTIVE_HIGH>;
+ input;
+ };
+ pin_gpio_b5 {
+ gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+ input;
+ };
+ pin_gpio_f0 {
+ gpios = <ASPEED_GPIO(F, 0) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_f1 {
+ gpios = <ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_f2 {
+ gpios = <ASPEED_GPIO(F, 2) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_f3 {
+ gpios = <ASPEED_GPIO(F, 3) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_f4 {
+ gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_f5 {
+ gpios = <ASPEED_GPIO(F, 5) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_f6 {
+ gpios = <ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_f7 {
+ gpios = <ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_l6 {
+ gpios = <ASPEED_GPIO(L, 6) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_l7 {
+ gpios = <ASPEED_GPIO(L, 7) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_s0 {
+ gpios = <ASPEED_GPIO(S, 0) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_s1 {
+ gpios = <ASPEED_GPIO(S, 1) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_v0 {
+ gpios = <ASPEED_GPIO(V, 0) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_v1 {
+ gpios = <ASPEED_GPIO(V, 1) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_v2 {
+ gpios = <ASPEED_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_v3 {
+ gpios = <ASPEED_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_w0 {
+ gpios = <ASPEED_GPIO(W, 0) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_w1 {
+ gpios = <ASPEED_GPIO(W, 1) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_w2 {
+ gpios = <ASPEED_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_w3 {
+ gpios = <ASPEED_GPIO(W, 3) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_w4 {
+ gpios = <ASPEED_GPIO(W, 4) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_w5 {
+ gpios = <ASPEED_GPIO(W, 5) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_w6 {
+ gpios = <ASPEED_GPIO(W, 6) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_w7 {
+ gpios = <ASPEED_GPIO(W, 7) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_z3 {
+ gpios = <ASPEED_GPIO(Z, 3) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_z4 {
+ gpios = <ASPEED_GPIO(Z, 4) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_z5 {
+ gpios = <ASPEED_GPIO(Z, 5) GPIO_ACTIVE_LOW>;
+ input;
+ };
+};
--
2.25.1
Revise fan tach config for max31790 driver change
Signed-off-by: Delphine CC Chiu <[email protected]>
---
.../aspeed/aspeed-bmc-facebook-yosemite4.dts | 48 +++++++++++++++++--
1 file changed, 44 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index 1b91821b019d..ba7db2693277 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -1095,8 +1095,18 @@ adc@1f {
pwm@20{
compatible = "maxim,max31790";
- pwm-as-tach = <4 5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0x20>;
+ channel@4 {
+ reg = <4>;
+ sensor-type = "TACH";
+ };
+
+ channel@5 {
+ reg = <5>;
+ sensor-type = "TACH";
+ };
};
gpio@22{
@@ -1108,8 +1118,18 @@ gpio@22{
pwm@2f{
compatible = "maxim,max31790";
- pwm-as-tach = <4 5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0x2f>;
+ channel@4 {
+ reg = <4>;
+ sensor-type = "TACH";
+ };
+
+ channel@5 {
+ reg = <5>;
+ sensor-type = "TACH";
+ };
};
adc@33 {
@@ -1145,8 +1165,18 @@ adc@1f {
pwm@20{
compatible = "maxim,max31790";
- pwm-as-tach = <4 5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0x20>;
+ channel@4 {
+ reg = <4>;
+ sensor-type = "TACH";
+ };
+
+ channel@5 {
+ reg = <5>;
+ sensor-type = "TACH";
+ };
};
gpio@22{
@@ -1158,8 +1188,18 @@ gpio@22{
pwm@2f{
compatible = "maxim,max31790";
- pwm-as-tach = <4 5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0x2f>;
+ channel@4 {
+ reg = <4>;
+ sensor-type = "TACH";
+ };
+
+ channel@5 {
+ reg = <5>;
+ sensor-type = "TACH";
+ };
};
adc@33 {
--
2.25.1
add mctp config for NIC
Signed-off-by: Delphine CC Chiu <[email protected]>
---
Changelog:
- v4
- Revise device node name
- v2
- Add patch for NIC mctp config
---
.../aspeed/aspeed-bmc-facebook-yosemite4.dts | 24 +++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index ba7db2693277..06f22562b381 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -1273,40 +1273,64 @@ imux24: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
+ mctp-controller;
temperature-sensor@1f {
compatible = "ti,tmp421";
reg = <0x1f>;
};
+
+ temperature-sensor@3c {
+ compatible = "smsc,emc1403";
+ reg = <0x3c>;
+ };
};
imux25: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
+ mctp-controller;
temperature-sensor@1f {
compatible = "ti,tmp421";
reg = <0x1f>;
};
+
+ temperature-sensor@3c {
+ compatible = "smsc,emc1403";
+ reg = <0x3c>;
+ };
};
imux26: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
+ mctp-controller;
temperature-sensor@1f {
compatible = "ti,tmp421";
reg = <0x1f>;
};
+
+ temperature-sensor@3c {
+ compatible = "smsc,emc1403";
+ reg = <0x3c>;
+ };
};
imux27: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
+ mctp-controller;
temperature-sensor@1f {
compatible = "ti,tmp421";
reg = <0x1f>;
};
+
+ temperature-sensor@3c {
+ compatible = "smsc,emc1403";
+ reg = <0x3c>;
+ };
};
};
};
--
2.25.1
Add NIC eeprom devicetree config
Signed-off-by: Delphine CC Chiu <[email protected]>
---
.../aspeed/aspeed-bmc-facebook-yosemite4.dts | 20 +++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index db195213a848..c2d184b21567 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -1330,6 +1330,11 @@ temperature-sensor@3c {
compatible = "smsc,emc1403";
reg = <0x3c>;
};
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
};
imux25: i2c@1 {
@@ -1346,6 +1351,11 @@ temperature-sensor@3c {
compatible = "smsc,emc1403";
reg = <0x3c>;
};
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
};
imux26: i2c@2 {
@@ -1362,6 +1372,11 @@ temperature-sensor@3c {
compatible = "smsc,emc1403";
reg = <0x3c>;
};
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
};
imux27: i2c@3 {
@@ -1378,6 +1393,11 @@ temperature-sensor@3c {
compatible = "smsc,emc1403";
reg = <0x3c>;
};
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
};
};
};
--
2.25.1
Remove idle state setting for yosemite4 NIC connection
Signed-off-by: Delphine CC Chiu <[email protected]>
---
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index f0e93c74003a..6d5710e5753c 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -1227,7 +1227,6 @@ mctp@10 {
i2c-mux@72 {
compatible = "nxp,pca9544";
- i2c-mux-idle-disconnect;
reg = <0x72>;
imux24: i2c@0 {
--
2.25.1
Mux pca9544 to cpld was added on EVT HW schematic design,
so add dts setting for devices behind mux pca9544 to cpld
Signed-off-by: Delphine CC Chiu <[email protected]>
---
.../aspeed/aspeed-bmc-facebook-yosemite4.dts | 64 ++++++++++++++-----
1 file changed, 49 insertions(+), 15 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index 06f22562b381..d85c29cbb286 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -36,6 +36,10 @@ aliases {
i2c31 = &imux31;
i2c32 = &imux32;
i2c33 = &imux33;
+ i2c34 = &imux34;
+ i2c35 = &imux35;
+ i2c36 = &imux36;
+ i2c37 = &imux37;
};
chosen {
@@ -951,24 +955,54 @@ &i2c12 {
status = "okay";
bus-frequency = <400000>;
- temperature-sensor@48 {
- compatible = "ti,tmp75";
- reg = <0x48>;
- };
+ i2c-mux@70 {
+ compatible = "nxp,pca9544";
+ i2c-mux-idle-disconnect;
+ reg = <0x70>;
- eeprom@50 {
- compatible = "atmel,24c128";
- reg = <0x50>;
- };
+ imux34: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
- eeprom@54 {
- compatible = "atmel,24c64";
- reg = <0x54>;
- };
+ temperature-sensor@48 {
+ compatible = "ti,tmp75";
+ reg = <0x48>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
- rtc@6f {
- compatible = "nuvoton,nct3018y";
- reg = <0x6f>;
+ eeprom@54 {
+ compatible = "atmel,24c64";
+ reg = <0x54>;
+ };
+
+ rtc@6f {
+ compatible = "nuvoton,nct3018y";
+ reg = <0x6f>;
+ };
+ };
+
+ imux35: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux36: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux37: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
};
};
--
2.25.1
Revise duty cycle SMB11 and SMB16 to high: 40%, low: 60%,
to meet 400kHz-i2c clock low time spec (> 1.3 us) from EE request
Signed-off-by: Delphine CC Chiu <[email protected]>
---
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index c2d184b21567..c86e4a5397c4 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -761,6 +761,7 @@ eeprom@54 {
&i2c10 {
status = "okay";
bus-frequency = <400000>;
+ i2c-clk-high-min-percent = <40>;
i2c-mux@74 {
compatible = "nxp,pca9544";
i2c-mux-idle-disconnect;
@@ -1306,6 +1307,7 @@ &i2c15 {
mctp-controller;
multi-master;
bus-frequency = <400000>;
+ i2c-clk-high-min-percent = <40>;
mctp@10 {
compatible = "mctp-i2c-controller";
--
2.25.1
Add ina233/ina28 support for medusa board adc sensors
Signed-off-by: Delphine CC Chiu <[email protected]>
---
.../dts/aspeed/aspeed-bmc-facebook-yosemite4.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index d85c29cbb286..db195213a848 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -915,6 +915,19 @@ power-sensor@40 {
reg = <0x40>;
};
+ power-sensor@41 {
+ compatible = "ti,ina233";
+ resistor-calibration = /bits/ 16 <0x0a00>;
+ current-lsb= /bits/ 16 <0x0001>;
+ reg = <0x41>;
+ };
+
+ power-sensor@44 {
+ compatible = "ti,ina238";
+ shunt-resistor = <1000>;
+ reg = <0x44>;
+ };
+
temperature-sensor@48 {
compatible = "ti,tmp75";
reg = <0x48>;
--
2.25.1
On Tue, 12 Mar 2024 14:15:32 +0800, Delphine CC Chiu wrote:
> Changelog:
> - v6
> - Revise i2c duty-cycle for meeting 400khz spec
> - v5
> - Support medusa board adc sensors
> - support NIC eeprom
> - v4
> - Re-format gpio linename
> - Revise i2c device node names
> - Split patches by logic changes
> - v3
> - Correct patch for revising gpio name
> - v2
> - Revise mx31790 fan tach config
> - Add mctp config for NIC
> - Support mux to cpld
> - Revise gpio name
> - v1
> - Add gpio and eeprom behind i2c-mux
> - Remove redundant idle-state setting for i2c-mux
> - Enable adc 15, wdt2,spi gpio for yosemite4 use
> - Revise quad mode to dual mode to avoid WP pin influnece the SPI
> - Revise power sensor adm1281 for yosemite4 schematic change
> - Add gpio pca9506 I/O expander for yosemite4 use
> - remove space for adm1272 compatible
> - enable interrupt setting for pca9555
> - add eeprom for yosemite4 medusa board/BSM use
> - remove temperature sensor for yosemite4 schematic change
> - add power sensor for power module reading
> - Revise adc128d818 adc mode for yosemite4 schematic change
> - Revise ina233 for yosemite4 schematic change
> - Remove idle state setting for yosemite4 NIC connection
> - Initialize bmc gpio state
> - Revise mx31790 fan tach config
> - Add mctp config for NIC
> - Support mux to cpld
> - Revise gpio name
>
> Delphine CC Chiu (22):
> ARM: dts: aspeed: yosemite4: Revise i2c-mux devices
> ARM: dts: aspeed: yosemite4: Enable adc15
> ARM: dts: aspeed: yosemite4: Enable spi-gpio setting
> ARM: dts: aspeed: yosemite4: Enable watchdog2
> ARM: dts: aspeed: yosemite4: Revise quad mode to dual mode
> ARM: dts: aspeed: yosemite4: Revise power sensor adm1281 for schematic
> change
> ARM: dts: aspeed: yosemite4: Add gpio pca9506
> ARM: dts: aspeed: yosemite4: Remove space for adm1272 compatible
> ARM: dts: aspeed: yosemite4: Enable interrupt setting for pca9555
> ARM: dts: aspeed: yosemite4: Add power sensor for power module reading
> ARM: dts: aspeed: yosemite4: Add eeprom for yosemite4 use
> ARM: dts: aspeed: yosemite4: Remove temperature sensor for yosemite4
> schematic change
> ARM: dts: aspeed: yosemite4: Revise adc128d818 adc mode for yosemite4
> schematic change
> ARM: dts: aspeed: yosemite4: Revise ina233 config for yosemite4
> schematic change
> ARM: dts: aspeed: yosemite4: Remove idle state setting for yosemite4
> NIC connection
> ARM: dts: aspeed: yosemite4: Initialize bmc gpio state
> ARM: dts: aspeed: yosemite4: Revise mx31790 fan tach config
> ARM: dts: aspeed: yosemite4: add mctp config for NIC
> ARM: dts: aspeed: yosemite4: support mux to cpld
> ARM: dts: aspeed: yosemite4: support medusa board adc sensors
> ARM: dts: aspeed: yosemite4: support NIC eeprom
> ARM: dts: aspeed: yosemite4: Revise i2c duty-cycle
>
> .../aspeed/aspeed-bmc-facebook-yosemite4.dts | 1258 +++++++++++++++--
> 1 file changed, 1151 insertions(+), 107 deletions(-)
>
> --
> 2.25.1
>
>
>
My bot found new DTB warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
New warnings running 'make CHECK_DTBS=y aspeed/aspeed-bmc-facebook-yosemite4.dtb' for [email protected]:
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:550.4-14: Warning (reg_format): /ahb/apb/bus@1e78a000/i2c-bus@480/i2c-mux@70/i2c@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:576.4-14: Warning (reg_format): /ahb/apb/bus@1e78a000/i2c-bus@480/i2c-mux@70/i2c@1:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:601.4-14: Warning (reg_format): /ahb/apb/bus@1e78a000/i2c-bus@480/i2c-mux@70/i2c@2:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:626.4-14: Warning (reg_format): /ahb/apb/bus@1e78a000/i2c-bus@480/i2c-mux@70/i2c@3:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:661.4-14: Warning (reg_format): /ahb/apb/bus@1e78a000/i2c-bus@500/i2c-mux@71/i2c@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:686.4-14: Warning (reg_format): /ahb/apb/bus@1e78a000/i2c-bus@500/i2c-mux@71/i2c@1:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:711.4-14: Warning (reg_format): /ahb/apb/bus@1e78a000/i2c-bus@500/i2c-mux@71/i2c@2:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:736.4-14: Warning (reg_format): /ahb/apb/bus@1e78a000/i2c-bus@500/i2c-mux@71/i2c@3:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:773.4-14: Warning (reg_format): /ahb/apb/bus@1e78a000/i2c-bus@580/i2c-mux@74/i2c@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:821.4-14: Warning (reg_format): /ahb/apb/bus@1e78a000/i2c-bus@580/i2c-mux@74/i2c@1:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:980.4-14: Warning (reg_format): /ahb/apb/bus@1e78a000/i2c-bus@680/i2c-mux@70/i2c@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1006.4-14: Warning (reg_format): /ahb/apb/bus@1e78a000/i2c-bus@680/i2c-mux@70/i2c@1:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1012.4-14: Warning (reg_format): /ahb/apb/bus@1e78a000/i2c-bus@680/i2c-mux@70/i2c@2:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1018.4-14: Warning (reg_format): /ahb/apb/bus@1e78a000/i2c-bus@680/i2c-mux@70/i2c@3:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1324.4-14: Warning (reg_format): /ahb/apb/bus@1e78a000/i2c-bus@800/i2c-mux@72/i2c@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1345.4-14: Warning (reg_format): /ahb/apb/bus@1e78a000/i2c-bus@800/i2c-mux@72/i2c@1:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1366.4-14: Warning (reg_format): /ahb/apb/bus@1e78a000/i2c-bus@800/i2c-mux@72/i2c@2:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1387.4-14: Warning (reg_format): /ahb/apb/bus@1e78a000/i2c-bus@800/i2c-mux@72/i2c@3:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format'
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:547.17-571.5: Warning (avoid_default_addr_size): /ahb/apb/bus@1e78a000/i2c-bus@480/i2c-mux@70/i2c@0: Relying on default #address-cells value
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:547.17-571.5: Warning (avoid_default_addr_size): /ahb/apb/bus@1e78a000/i2c-bus@480/i2c-mux@70/i2c@0: Relying on default #size-cells value
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:573.17-596.5: Warning (avoid_default_addr_size): /ahb/apb/bus@1e78a000/i2c-bus@480/i2c-mux@70/i2c@1: Relying on default #address-cells value
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:573.17-596.5: Warning (avoid_default_addr_size): /ahb/apb/bus@1e78a000/i2c-bus@480/i2c-mux@70/i2c@1: Relying on default #size-cells value
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:598.17-621.5: Warning (avoid_default_addr_size): /ahb/apb/bus@1e78a000/i2c-bus@480/i2c-mux@70/i2c@2: Relying on default #address-cells value
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:598.17-621.5: Warning (avoid_default_addr_size): /ahb/apb/bus@1e78a000/i2c-bus@480/i2c-mux@70/i2c@2: Relying on default #size-cells value
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:623.17-646.5: Warning (avoid_default_addr_size): /ahb/apb/bus@1e78a000/i2c-bus@480/i2c-mux@70/i2c@3: Relying on default #address-cells value
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:623.17-646.5: Warning (avoid_default_addr_size): /ahb/apb/bus@1e78a000/i2c-bus@480/i2c-mux@70/i2c@3: Relying on default #size-cells value
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:658.17-681.5: Warning (avoid_default_addr_size): /ahb/apb/bus@1e78a000/i2c-bus@500/i2c-mux@71/i2c@0: Relying on default #address-cells value
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:658.17-681.5: Warning (avoid_default_addr_size): /ahb/apb/bus@1e78a000/i2c-bus@500/i2c-mux@71/i2c@0: Relying on default #size-cells value
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:683.17-706.5: Warning (avoid_default_addr_size): /ahb/apb/bus@1e78a000/i2c-bus@500/i2c-mux@71/i2c@1: Relying on default #address-cells value
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:683.17-706.5: Warning (avoid_default_addr_size): /ahb/apb/bus@1e78a000/i2c-bus@500/i2c-mux@71/i2c@1: Relying on default #size-cells value
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:708.17-731.5: Warning (avoid_default_addr_size): /ahb/apb/bus@1e78a000/i2c-bus@500/i2c-mux@71/i2c@2: Relying on default #address-cells value
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:708.17-731.5: Warning (avoid_default_addr_size): /ahb/apb/bus@1e78a000/i2c-bus@500/i2c-mux@71/i2c@2: Relying on default #size-cells value
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:733.17-757.5: Warning (avoid_default_addr_size): /ahb/apb/bus@1e78a000/i2c-bus@500/i2c-mux@71/i2c@3: Relying on default #address-cells value
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:733.17-757.5: Warning (avoid_default_addr_size): /ahb/apb/bus@1e78a000/i2c-bus@500/i2c-mux@71/i2c@3: Relying on default #size-cells value
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:770.17-816.5: Warning (avoid_default_addr_size): /ahb/apb/bus@1e78a000/i2c-bus@580/i2c-mux@74/i2c@0: Relying on default #address-cells value
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:770.17-816.5: Warning (avoid_default_addr_size): /ahb/apb/bus@1e78a000/i2c-bus@580/i2c-mux@74/i2c@0: Relying on default #size-cells value
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:818.17-822.5: Warning (avoid_default_addr_size): /ahb/apb/bus@1e78a000/i2c-bus@580/i2c-mux@74/i2c@1: Relying on default #address-cells value
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:818.17-822.5: Warning (avoid_default_addr_size): /ahb/apb/bus@1e78a000/i2c-bus@580/i2c-mux@74/i2c@1: Relying on default #size-cells value
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:977.17-1001.5: Warning (avoid_default_addr_size): /ahb/apb/bus@1e78a000/i2c-bus@680/i2c-mux@70/i2c@0: Relying on default #address-cells value
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:977.17-1001.5: Warning (avoid_default_addr_size): /ahb/apb/bus@1e78a000/i2c-bus@680/i2c-mux@70/i2c@0: Relying on default #size-cells value
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1003.17-1007.5: Warning (avoid_default_addr_size): /ahb/apb/bus@1e78a000/i2c-bus@680/i2c-mux@70/i2c@1: Relying on default #address-cells value
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1003.17-1007.5: Warning (avoid_default_addr_size): /ahb/apb/bus@1e78a000/i2c-bus@680/i2c-mux@70/i2c@1: Relying on default #size-cells value
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1009.17-1013.5: Warning (avoid_default_addr_size): /ahb/apb/bus@1e78a000/i2c-bus@680/i2c-mux@70/i2c@2: Relying on default #address-cells value
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1009.17-1013.5: Warning (avoid_default_addr_size): /ahb/apb/bus@1e78a000/i2c-bus@680/i2c-mux@70/i2c@2: Relying on default #size-cells value
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1015.17-1019.5: Warning (avoid_default_addr_size): /ahb/apb/bus@1e78a000/i2c-bus@680/i2c-mux@70/i2c@3: Relying on default #address-cells value
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1015.17-1019.5: Warning (avoid_default_addr_size): /ahb/apb/bus@1e78a000/i2c-bus@680/i2c-mux@70/i2c@3: Relying on default #size-cells value
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1321.17-1340.5: Warning (avoid_default_addr_size): /ahb/apb/bus@1e78a000/i2c-bus@800/i2c-mux@72/i2c@0: Relying on default #address-cells value
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1321.17-1340.5: Warning (avoid_default_addr_size): /ahb/apb/bus@1e78a000/i2c-bus@800/i2c-mux@72/i2c@0: Relying on default #size-cells value
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1342.17-1361.5: Warning (avoid_default_addr_size): /ahb/apb/bus@1e78a000/i2c-bus@800/i2c-mux@72/i2c@1: Relying on default #address-cells value
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1342.17-1361.5: Warning (avoid_default_addr_size): /ahb/apb/bus@1e78a000/i2c-bus@800/i2c-mux@72/i2c@1: Relying on default #size-cells value
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1363.17-1382.5: Warning (avoid_default_addr_size): /ahb/apb/bus@1e78a000/i2c-bus@800/i2c-mux@72/i2c@2: Relying on default #address-cells value
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1363.17-1382.5: Warning (avoid_default_addr_size): /ahb/apb/bus@1e78a000/i2c-bus@800/i2c-mux@72/i2c@2: Relying on default #size-cells value
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1384.17-1403.5: Warning (avoid_default_addr_size): /ahb/apb/bus@1e78a000/i2c-bus@800/i2c-mux@72/i2c@3: Relying on default #address-cells value
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1384.17-1403.5: Warning (avoid_default_addr_size): /ahb/apb/bus@1e78a000/i2c-bus@800/i2c-mux@72/i2c@3: Relying on default #size-cells value
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1553.3-29: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_b4:gpios: cell 0 is not a phandle reference
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1552.14-1555.4: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_b4: Missing property '#gpio-cells' in node /ahb/apb/syscon@1e6e2000/pinctrl/usb2bd_default or bad phandle (referred from gpios[0])
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1557.3-29: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_b5:gpios: cell 0 is not a phandle reference
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1556.14-1559.4: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_b5: Missing property '#gpio-cells' in node /ahb/apb/syscon@1e6e2000/interrupt-controller@560 or bad phandle (referred from gpios[0])
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1561.3-29: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_f0:gpios: cell 0 is not a phandle reference
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1560.14-1563.4: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_f0: Missing property '#gpio-cells' in node /ahb/apb/syscon@1e6e2000/pinctrl/txd1_default or bad phandle (referred from gpios[0])
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1565.3-29: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_f1:gpios: cell 0 is not a phandle reference
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1564.14-1567.4: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_f1: Missing property '#gpio-cells' in node /ahb/apb/syscon@1e6e2000/pinctrl/rxd1_default or bad phandle (referred from gpios[0])
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1569.3-29: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_f2:gpios: cell 0 is not a phandle reference
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1568.14-1571.5: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_f2: Missing property '#gpio-cells' in node /ahb/apb/syscon@1e6e2000/pinctrl/wdtrst1_default or bad phandle (referred from gpios[0])
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1573.3-29: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_f3:gpios: cell 0 is not a phandle reference
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1572.14-1575.4: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_f3: Missing property '#gpio-cells' in node /ahb/apb/syscon@1e6e2000/pinctrl/wdtrst2_default or bad phandle (referred from gpios[0])
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1577.3-29: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_f4:gpios: cell 0 is not a phandle reference
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1576.14-1579.4: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_f4: Missing property '#gpio-cells' in node /ahb/apb/syscon@1e6e2000/pinctrl/emmc_default or bad phandle (referred from gpios[0])
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1581.3-29: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_f5:gpios: cell 0 is not a phandle reference
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1580.14-1583.4: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_f5: Missing property '#gpio-cells' in node /ahb/apb/syscon@1e6e2000/pinctrl/txd2_default or bad phandle (referred from gpios[0])
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1585.3-29: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_f6:gpios: cell 0 is not a phandle reference
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1584.14-1587.4: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_f6: Missing property '#gpio-cells' in node /ahb/apb/syscon@1e6e2000/pinctrl/rxd2_default or bad phandle (referred from gpios[0])
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1589.3-29: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_f7:gpios: cell 0 is not a phandle reference
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1588.14-1591.4: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_f7: Missing property '#gpio-cells' in node /ahb/apb/syscon@1e6e2000/pinctrl/txd3_default or bad phandle (referred from gpios[0])
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1593.3-30: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_l6:gpios: cell 0 is not a phandle reference
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1593.3-30: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_l6:gpios: Could not get phandle node for (cell 0)
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1597.3-30: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_l7:gpios: cell 0 is not a phandle reference
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1597.3-30: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_l7:gpios: Could not get phandle node for (cell 0)
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1601.3-30: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_s0:gpios: cell 0 is not a phandle reference
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1601.3-30: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_s0:gpios: Could not get phandle node for (cell 0)
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1605.3-30: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_s1:gpios: cell 0 is not a phandle reference
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1605.3-30: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_s1:gpios: Could not get phandle node for (cell 0)
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1609.3-30: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_v0:gpios: cell 0 is not a phandle reference
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1609.3-30: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_v0:gpios: Could not get phandle node for (cell 0)
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1613.3-30: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_v1:gpios: cell 0 is not a phandle reference
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1613.3-30: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_v1:gpios: Could not get phandle node for (cell 0)
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1617.3-30: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_v2:gpios: cell 0 is not a phandle reference
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1617.3-30: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_v2:gpios: Could not get phandle node for (cell 0)
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1621.3-30: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_v3:gpios: cell 0 is not a phandle reference
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1621.3-30: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_v3:gpios: Could not get phandle node for (cell 0)
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1625.3-30: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_w0:gpios: cell 0 is not a phandle reference
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1625.3-30: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_w0:gpios: Could not get phandle node for (cell 0)
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1629.3-30: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_w1:gpios: cell 0 is not a phandle reference
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1629.3-30: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_w1:gpios: Could not get phandle node for (cell 0)
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1633.3-30: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_w2:gpios: cell 0 is not a phandle reference
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1633.3-30: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_w2:gpios: Could not get phandle node for (cell 0)
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1637.3-30: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_w3:gpios: cell 0 is not a phandle reference
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1637.3-30: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_w3:gpios: Could not get phandle node for (cell 0)
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1641.3-30: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_w4:gpios: cell 0 is not a phandle reference
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1641.3-30: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_w4:gpios: Could not get phandle node for (cell 0)
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1645.3-30: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_w5:gpios: cell 0 is not a phandle reference
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1645.3-30: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_w5:gpios: Could not get phandle node for (cell 0)
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1649.3-30: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_w6:gpios: cell 0 is not a phandle reference
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1649.3-30: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_w6:gpios: Could not get phandle node for (cell 0)
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1653.3-30: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_w7:gpios: cell 0 is not a phandle reference
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1653.3-30: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_w7:gpios: Could not get phandle node for (cell 0)
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1657.3-30: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_z3:gpios: cell 0 is not a phandle reference
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1657.3-30: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_z3:gpios: Could not get phandle node for (cell 0)
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1661.3-30: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_z4:gpios: cell 0 is not a phandle reference
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1661.3-30: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_z4:gpios: Could not get phandle node for (cell 0)
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1665.3-30: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_z5:gpios: cell 0 is not a phandle reference
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:1665.3-30: Warning (gpios_property): /ahb/apb/gpio@1e780000/pin_gpio_z5:gpios: Could not get phandle node for (cell 0)
Traceback (most recent call last):
File "/home/rob/.local/bin/dt-validate", line 8, in <module>
sys.exit(main())
^^^^^^
File "/home/rob/proj/dt-schema/dtschema/dtb_validate.py", line 144, in main
sg.check_dtb(filename)
File "/home/rob/proj/dt-schema/dtschema/dtb_validate.py", line 87, in check_dtb
dt = self.validator.decode_dtb(f.read())
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/rob/proj/dt-schema/dtschema/validator.py", line 518, in decode_dtb
return [dtschema.dtb.fdt_unflatten(self, dtb)]
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/rob/proj/dt-schema/dtschema/dtb.py", line 492, in fdt_unflatten
fixup_gpios(dt)
File "/home/rob/proj/dt-schema/dtschema/dtb.py", line 381, in fixup_gpios
fixup_gpios(v)
File "/home/rob/proj/dt-schema/dtschema/dtb.py", line 381, in fixup_gpios
fixup_gpios(v)
File "/home/rob/proj/dt-schema/dtschema/dtb.py", line 381, in fixup_gpios
fixup_gpios(v)
[Previous line repeated 1 more time]
File "/home/rob/proj/dt-schema/dtschema/dtb.py", line 402, in fixup_gpios
node = phandles[phandle]
~~~~~~~~^^^^^^^^^
KeyError: 94
Hello,
On Tue, 2024-03-12 at 14:15 +0800, Delphine CC Chiu wrote:
> Changelog:
> - v6
> - Revise i2c duty-cycle for meeting 400khz spec
A quick spot-check suggests that my comments on v5 haven't been
addressed. I didn't receive any replies to those comments either.
Can you please either discuss or implement the suggestions before
sending the series again?
Andrew
> - v5
> - Support medusa board adc sensors
> - support NIC eeprom