2024-03-18 11:35:10

by Radu Sabau

[permalink] [raw]
Subject: [PATCH 2/2] hwmon: pmbus: adp1050 : Add driver support

Add support for ADP1050 Digital Controller for Isolated Power Supplies
with PMBus interface Voltage, Current and Temperature Monitor.

The ADP1050 implements several features to enable a robust
system of parallel and redundant operation for customers who
require high availability. The device can measure voltage,
current and temperature that can be used in different
techniques to identify and safely shut down an erroneous
power supply in parallel operation mode.

Signed-off-by: Radu Sabau <[email protected]>
---
Documentation/hwmon/adp1050.rst | 69 ++++++++++++++++++++
Documentation/hwmon/index.rst | 1 +
drivers/hwmon/pmbus/Kconfig | 10 +++
drivers/hwmon/pmbus/Makefile | 1 +
drivers/hwmon/pmbus/adp1050.c | 111 ++++++++++++++++++++++++++++++++
5 files changed, 192 insertions(+)
create mode 100644 Documentation/hwmon/adp1050.rst
create mode 100644 drivers/hwmon/pmbus/adp1050.c

diff --git a/Documentation/hwmon/adp1050.rst b/Documentation/hwmon/adp1050.rst
new file mode 100644
index 000000000000..e3e5bb650a51
--- /dev/null
+++ b/Documentation/hwmon/adp1050.rst
@@ -0,0 +1,69 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver adp1050
+=====================
+
+Supported chips:
+
+ * Analog Devices ADP1050
+
+ Prefix: 'adp1050'
+
+ Addresses scanned: I2C 0x70 - 0x77
+
+ Datasheet: https://www.analog.com/media/en/technical-documentation/data-
+sheets/ADP1050.pdf
+
+Authors:
+
+ - Radu Sabau <[email protected]>
+
+
+Description
+-----------
+
+This driver supprts hardware monitoring for Analog Devices ADP1050 Digital
+Controller for Isolated Power Supply with PMBus interface.
+
+The ADP1050 is an advanced digital controller with a PMBus™
+interface targeting high density, high efficiency dc-to-dc power
+conversion used to monitor system temperatures, voltages and currents.
+Through the PMBus interface, the device can monitor input/output voltages,
+input current and temperature.
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate
+the devices explicitly.
+Please see Documentation/i2c/instantiating-devices.rst for details.
+
+The vin scale monitor value and iin scale monitor value can be
+configured by a device tree property;see
+Documentation/devicetree/bindings/hwmon/pmbus/adi,adp1050.yaml for details
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
+
+Sysfs Attributes
+----------------
+
+================= ========================================
+in1_label "vin"
+in1_input Measured input voltage
+in1_alarm Input voltage alarm
+in2_label "vout1"
+in2_input Measured output voltage
+in2_crit Critical maximum output voltage
+in2_crit_alarm Output voltage high alarm
+in2_lcrit Critical minimum output voltage
+in2_lcrit_alarm Output voltage critical low alarm
+curr1_label "iin"
+curr1_input Measured input current.
+curr1_alarm Input current alarm
+temp1_input Measured temperature
+temp1_crit Critical high temperature
+temp1_crit_alarm Chip temperature critical high alarm
+================= ========================================
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index 1ca7a4fe1f8f..9a4fd576e6f6 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -33,6 +33,7 @@ Hardware Monitoring Kernel Drivers
adm1266
adm1275
adm9240
+ adp1050
ads7828
adt7410
adt7411
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index 557ae0c414b0..38e794d83cc3 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -57,6 +57,16 @@ config SENSORS_ADM1275
This driver can also be built as a module. If so, the module will
be called adm1275.

+config SENSORS_ADP1050
+ tristate "Analog Devices ADP1050 digital controller for Power Supplies"
+ help
+ If you say yes here you get hardware monitoring support for Analog
+ Devices ADP1050 digital controller for isolated power supply with
+ PMBus interface.
+
+ This driver can also be built as a module. If so, the module will
+ be called adp1050.
+
config SENSORS_BEL_PFE
tristate "Bel PFE Compatible Power Supplies"
help
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
index f14ecf03ad77..95a8dea5e5ed 100644
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_SENSORS_PMBUS) += pmbus.o
obj-$(CONFIG_SENSORS_ACBEL_FSG032) += acbel-fsg032.o
obj-$(CONFIG_SENSORS_ADM1266) += adm1266.o
obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o
+obj-$(CONFIG_SENSORS_ADP1050) += adp1050.o
obj-$(CONFIG_SENSORS_BEL_PFE) += bel-pfe.o
obj-$(CONFIG_SENSORS_BPA_RS600) += bpa-rs600.o
obj-$(CONFIG_SENSORS_DELTA_AHE50DC_FAN) += delta-ahe50dc-fan.o
diff --git a/drivers/hwmon/pmbus/adp1050.c b/drivers/hwmon/pmbus/adp1050.c
new file mode 100644
index 000000000000..53198d858156
--- /dev/null
+++ b/drivers/hwmon/pmbus/adp1050.c
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Hardware monitoring driver for Analog Devices ADP1050
+ *
+ * Copyright (C) 2024 Analog Devices, Inc.
+ */
+#include <linux/bits.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include "pmbus.h"
+
+#define ADP1050_CHIP_PASSWORD 0xD7
+
+#define ADP1050_VIN_SCALE_MONITOR 0xD8
+#define ADP1050_IIN_SCALE_MONITOR 0xD9
+
+static struct pmbus_driver_info adp1050_info = {
+ .pages = 1,
+ .format[PSC_VOLTAGE_IN] = linear,
+ .format[PSC_VOLTAGE_OUT] = linear,
+ .format[PSC_CURRENT_IN] = linear,
+ .format[PSC_TEMPERATURE] = linear,
+ .func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
+ | PMBUS_HAVE_IIN | PMBUS_HAVE_TEMP
+ | PMBUS_HAVE_STATUS_TEMP,
+};
+
+static int adp1050_probe(struct i2c_client *client)
+{
+ u32 vin_scale_monitor, iin_scale_monitor;
+ int ret;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_WRITE_WORD_DATA))
+ return -ENODEV;
+
+ /* Unlock CHIP's password in order to be able to read/write to it's
+ * VIN_SCALE and IIN_SCALE registers.
+ */
+ ret = i2c_smbus_write_word_data(client, ADP1050_CHIP_PASSWORD, 0xFFFF);
+ if (ret < 0) {
+ dev_err_probe(&client->dev, "Device can't be unlocked.\n");
+ return ret;
+ }
+
+ ret = i2c_smbus_write_word_data(client, ADP1050_CHIP_PASSWORD, 0xFFFF);
+ if (ret < 0) {
+ dev_err_probe(&client->dev, "Device couldn't be unlocked.\n");
+ return ret;
+ }
+
+ /* If adi,vin-scale-monitor isn't set or is set to 0 means that the
+ * VIN monitor isn't used, therefore 0 is used as scale in order
+ * for the readings to return 0.
+ */
+ if (device_property_read_u32(&client->dev, "adi,vin-scale-monitor",
+ &vin_scale_monitor))
+ vin_scale_monitor = 0;
+
+ /* If adi,iin-scale-monitor isn't set or is set to 0 means that the
+ * IIN monitor isn't used, therefore 0 is used as scale in order
+ * for the readings to return 0.
+ */
+ if (device_property_read_u32(&client->dev, "adi,iin-scale-monitor",
+ &iin_scale_monitor))
+ iin_scale_monitor = 0;
+
+ ret = i2c_smbus_write_word_data(client, ADP1050_VIN_SCALE_MONITOR,
+ vin_scale_monitor);
+ if (ret < 0)
+ return ret;
+
+ ret = i2c_smbus_write_word_data(client, ADP1050_IIN_SCALE_MONITOR,
+ iin_scale_monitor);
+ if (ret < 0)
+ return ret;
+
+ return pmbus_do_probe(client, &adp1050_info);
+}
+
+static const struct i2c_device_id adp1050_id[] = {
+ {"adp1050", 0},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, adp1050_id);
+
+static const struct of_device_id adp1050_of_match[] = {
+ { .compatible = "adi,adp1050"},
+ {}
+};
+MODULE_DEVICE_TABLE(of, adp1050_of_match);
+
+static struct i2c_driver adp1050_driver = {
+ .driver = {
+ .name = "adp1050",
+ .of_match_table = of_match_ptr(adp1050_of_match),
+ },
+ .probe = adp1050_probe,
+ .id_table = adp1050_id,
+};
+module_i2c_driver(adp1050_driver);
+
+MODULE_AUTHOR("Radu Sabau <[email protected]>");
+MODULE_DESCRIPTION("Analog Devices ADP1050 HWMON PMBus Driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
--
2.34.1



2024-03-18 15:07:28

by Guenter Roeck

[permalink] [raw]
Subject: Re: [PATCH 2/2] hwmon: pmbus: adp1050 : Add driver support

On 3/18/24 04:21, Radu Sabau wrote:
> Add support for ADP1050 Digital Controller for Isolated Power Supplies
> with PMBus interface Voltage, Current and Temperature Monitor.
>
> The ADP1050 implements several features to enable a robust
> system of parallel and redundant operation for customers who
> require high availability. The device can measure voltage,
> current and temperature that can be used in different
> techniques to identify and safely shut down an erroneous
> power supply in parallel operation mode.
>
> Signed-off-by: Radu Sabau <[email protected]>
> ---
> Documentation/hwmon/adp1050.rst | 69 ++++++++++++++++++++
> Documentation/hwmon/index.rst | 1 +
> drivers/hwmon/pmbus/Kconfig | 10 +++
> drivers/hwmon/pmbus/Makefile | 1 +
> drivers/hwmon/pmbus/adp1050.c | 111 ++++++++++++++++++++++++++++++++
> 5 files changed, 192 insertions(+)
> create mode 100644 Documentation/hwmon/adp1050.rst
> create mode 100644 drivers/hwmon/pmbus/adp1050.c
>
> diff --git a/Documentation/hwmon/adp1050.rst b/Documentation/hwmon/adp1050.rst
> new file mode 100644
> index 000000000000..e3e5bb650a51
> --- /dev/null
> +++ b/Documentation/hwmon/adp1050.rst
> @@ -0,0 +1,69 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +Kernel driver adp1050
> +=====================
> +
> +Supported chips:
> +
> + * Analog Devices ADP1050
> +
> + Prefix: 'adp1050'
> +
> + Addresses scanned: I2C 0x70 - 0x77
> +
> + Datasheet: https://www.analog.com/media/en/technical-documentation/data-
> +sheets/ADP1050.pdf
> +
> +Authors:
> +
> + - Radu Sabau <[email protected]>
> +
> +
> +Description
> +-----------
> +
> +This driver supprts hardware monitoring for Analog Devices ADP1050 Digital
> +Controller for Isolated Power Supply with PMBus interface.
> +
> +The ADP1050 is an advanced digital controller with a PMBus™
> +interface targeting high density, high efficiency dc-to-dc power
> +conversion used to monitor system temperatures, voltages and currents.
> +Through the PMBus interface, the device can monitor input/output voltages,
> +input current and temperature.
> +
> +Usage Notes
> +-----------
> +
> +This driver does not auto-detect devices. You will have to instantiate
> +the devices explicitly.
> +Please see Documentation/i2c/instantiating-devices.rst for details.
> +
> +The vin scale monitor value and iin scale monitor value can be
> +configured by a device tree property;see
> +Documentation/devicetree/bindings/hwmon/pmbus/adi,adp1050.yaml for details
> +
> +Platform data support
> +---------------------
> +
> +The driver supports standard PMBus driver platform data.
> +
> +Sysfs Attributes
> +----------------
> +
> +================= ========================================
> +in1_label "vin"
> +in1_input Measured input voltage
> +in1_alarm Input voltage alarm
> +in2_label "vout1"
> +in2_input Measured output voltage
> +in2_crit Critical maximum output voltage
> +in2_crit_alarm Output voltage high alarm
> +in2_lcrit Critical minimum output voltage
> +in2_lcrit_alarm Output voltage critical low alarm
> +curr1_label "iin"
> +curr1_input Measured input current.
> +curr1_alarm Input current alarm
> +temp1_input Measured temperature
> +temp1_crit Critical high temperature
> +temp1_crit_alarm Chip temperature critical high alarm
> +================= ========================================
> diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
> index 1ca7a4fe1f8f..9a4fd576e6f6 100644
> --- a/Documentation/hwmon/index.rst
> +++ b/Documentation/hwmon/index.rst
> @@ -33,6 +33,7 @@ Hardware Monitoring Kernel Drivers
> adm1266
> adm1275
> adm9240
> + adp1050
> ads7828
> adt7410
> adt7411
> diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
> index 557ae0c414b0..38e794d83cc3 100644
> --- a/drivers/hwmon/pmbus/Kconfig
> +++ b/drivers/hwmon/pmbus/Kconfig
> @@ -57,6 +57,16 @@ config SENSORS_ADM1275
> This driver can also be built as a module. If so, the module will
> be called adm1275.
>
> +config SENSORS_ADP1050
> + tristate "Analog Devices ADP1050 digital controller for Power Supplies"
> + help
> + If you say yes here you get hardware monitoring support for Analog
> + Devices ADP1050 digital controller for isolated power supply with
> + PMBus interface.
> +
> + This driver can also be built as a module. If so, the module will
> + be called adp1050.
> +
> config SENSORS_BEL_PFE
> tristate "Bel PFE Compatible Power Supplies"
> help
> diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
> index f14ecf03ad77..95a8dea5e5ed 100644
> --- a/drivers/hwmon/pmbus/Makefile
> +++ b/drivers/hwmon/pmbus/Makefile
> @@ -8,6 +8,7 @@ obj-$(CONFIG_SENSORS_PMBUS) += pmbus.o
> obj-$(CONFIG_SENSORS_ACBEL_FSG032) += acbel-fsg032.o
> obj-$(CONFIG_SENSORS_ADM1266) += adm1266.o
> obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o
> +obj-$(CONFIG_SENSORS_ADP1050) += adp1050.o
> obj-$(CONFIG_SENSORS_BEL_PFE) += bel-pfe.o
> obj-$(CONFIG_SENSORS_BPA_RS600) += bpa-rs600.o
> obj-$(CONFIG_SENSORS_DELTA_AHE50DC_FAN) += delta-ahe50dc-fan.o
> diff --git a/drivers/hwmon/pmbus/adp1050.c b/drivers/hwmon/pmbus/adp1050.c
> new file mode 100644
> index 000000000000..53198d858156
> --- /dev/null
> +++ b/drivers/hwmon/pmbus/adp1050.c
> @@ -0,0 +1,111 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Hardware monitoring driver for Analog Devices ADP1050
> + *
> + * Copyright (C) 2024 Analog Devices, Inc.
> + */
> +#include <linux/bits.h>
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include "pmbus.h"
> +
> +#define ADP1050_CHIP_PASSWORD 0xD7
> +
> +#define ADP1050_VIN_SCALE_MONITOR 0xD8
> +#define ADP1050_IIN_SCALE_MONITOR 0xD9
> +
> +static struct pmbus_driver_info adp1050_info = {
> + .pages = 1,
> + .format[PSC_VOLTAGE_IN] = linear,
> + .format[PSC_VOLTAGE_OUT] = linear,
> + .format[PSC_CURRENT_IN] = linear,
> + .format[PSC_TEMPERATURE] = linear,
> + .func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
> + | PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
> + | PMBUS_HAVE_IIN | PMBUS_HAVE_TEMP
> + | PMBUS_HAVE_STATUS_TEMP,
> +};
> +
> +static int adp1050_probe(struct i2c_client *client)
> +{
> + u32 vin_scale_monitor, iin_scale_monitor;
> + int ret;
> +
> + if (!i2c_check_functionality(client->adapter,
> + I2C_FUNC_SMBUS_WRITE_WORD_DATA))
> + return -ENODEV;
> +
> + /* Unlock CHIP's password in order to be able to read/write to it's
> + * VIN_SCALE and IIN_SCALE registers.
> + */
> + ret = i2c_smbus_write_word_data(client, ADP1050_CHIP_PASSWORD, 0xFFFF);
> + if (ret < 0) {
> + dev_err_probe(&client->dev, "Device can't be unlocked.\n");
> + return ret;
> + }
> +

> + ret = i2c_smbus_write_word_data(client, ADP1050_CHIP_PASSWORD, 0xFFFF);
> + if (ret < 0) {
> + dev_err_probe(&client->dev, "Device couldn't be unlocked.\n");
> + return ret;
> + }
> +

The datasheet says that the factory default password is 0xffff. What if it isn't ?
Refusing to instantiate the chip because it can't be unlocked seems a bit extreme.
After all, the password _can_ be changed.

> + /* If adi,vin-scale-monitor isn't set or is set to 0 means that the
> + * VIN monitor isn't used, therefore 0 is used as scale in order
> + * for the readings to return 0.
> + */
> + if (device_property_read_u32(&client->dev, "adi,vin-scale-monitor",
> + &vin_scale_monitor))
> + vin_scale_monitor = 0;
> +
> + /* If adi,iin-scale-monitor isn't set or is set to 0 means that the
> + * IIN monitor isn't used, therefore 0 is used as scale in order
> + * for the readings to return 0.
> + */
> + if (device_property_read_u32(&client->dev, "adi,iin-scale-monitor",
> + &iin_scale_monitor))
> + iin_scale_monitor = 0;
> +

I don't think the "-monitor" extensions in those property names
add any value.

> + ret = i2c_smbus_write_word_data(client, ADP1050_VIN_SCALE_MONITOR,
> + vin_scale_monitor);
> + if (ret < 0)
> + return ret;
> +
> + ret = i2c_smbus_write_word_data(client, ADP1050_IIN_SCALE_MONITOR,
> + iin_scale_monitor);
> + if (ret < 0)
> + return ret;
> +

If vin and iin monitoring is disabled on purpose, why still set
PMBUS_HAVE_VIN and PMBUS_HAVE_IIN above ? Reporting input values as 0
if the values are explicitly not monitored does not make sense to me.

I am puzzled about this to start with. Unless I am missing something,
the data sheet has no indication that VIN monitoring and/or IIN monitoring
is actually turned off if iin_scale/vin_scale are set to 0. Why support
the option to disable them ? That doesn't make sense to me. Please explain
how/when this makes sense. Please also explain why chip support is made
to depend on devicetree support. Register values may have been be set by
rommon/bios or (much more likely) by manufacturing, or users could just
want to keep the chip default. Why force-override it or even force-disable
it ?

Thanks,
Guenter


2024-03-18 16:12:52

by Krzysztof Kozlowski

[permalink] [raw]
Subject: Re: [PATCH 2/2] hwmon: pmbus: adp1050 : Add driver support

On 18/03/2024 12:21, Radu Sabau wrote:
> Add support for ADP1050 Digital Controller for Isolated Power Supplies
> with PMBus interface Voltage, Current and Temperature Monitor.
>

..

> +static int adp1050_probe(struct i2c_client *client)
> +{
> + u32 vin_scale_monitor, iin_scale_monitor;
> + int ret;
> +
> + if (!i2c_check_functionality(client->adapter,
> + I2C_FUNC_SMBUS_WRITE_WORD_DATA))
> + return -ENODEV;
> +
> + /* Unlock CHIP's password in order to be able to read/write to it's
> + * VIN_SCALE and IIN_SCALE registers.
> + */
> + ret = i2c_smbus_write_word_data(client, ADP1050_CHIP_PASSWORD, 0xFFFF);
> + if (ret < 0) {
> + dev_err_probe(&client->dev, "Device can't be unlocked.\n");

Syntax is: return dev_err_probe(). Same in other places.

> + return ret;
> + }
> +
> + ret = i2c_smbus_write_word_data(client, ADP1050_CHIP_PASSWORD, 0xFFFF);
> + if (ret < 0) {
> + dev_err_probe(&client->dev, "Device couldn't be unlocked.\n");
> + return ret;
> + }
> +
> + /* If adi,vin-scale-monitor isn't set or is set to 0 means that the
> + * VIN monitor isn't used, therefore 0 is used as scale in order
> + * for the readings to return 0.
> + */

Please use Linux coding style comments. /* and aligned */.


> + if (device_property_read_u32(&client->dev, "adi,vin-scale-monitor",
> + &vin_scale_monitor))
> + vin_scale_monitor = 0;
> +
> + /* If adi,iin-scale-monitor isn't set or is set to 0 means that the
> + * IIN monitor isn't used, therefore 0 is used as scale in order
> + * for the readings to return 0.
> + */
> + if (device_property_read_u32(&client->dev, "adi,iin-scale-monitor",
> + &iin_scale_monitor))
> + iin_scale_monitor = 0;
> +
> + ret = i2c_smbus_write_word_data(client, ADP1050_VIN_SCALE_MONITOR,
> + vin_scale_monitor);
> + if (ret < 0)
> + return ret;
> +
> + ret = i2c_smbus_write_word_data(client, ADP1050_IIN_SCALE_MONITOR,
> + iin_scale_monitor);
> + if (ret < 0)
> + return ret;
> +
> + return pmbus_do_probe(client, &adp1050_info);
> +}
> +
> +static const struct i2c_device_id adp1050_id[] = {
> + {"adp1050", 0},
> + {}
> +};
> +MODULE_DEVICE_TABLE(i2c, adp1050_id);
> +
> +static const struct of_device_id adp1050_of_match[] = {
> + { .compatible = "adi,adp1050"},
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, adp1050_of_match);
> +
> +static struct i2c_driver adp1050_driver = {
> + .driver = {
> + .name = "adp1050",
> + .of_match_table = of_match_ptr(adp1050_of_match),

Drop of_match_ptr, you will have here warnings.

> + },
> + .probe = adp1050_probe,
> + .id_table = adp1050_id,
> +};
> +module_i2c_driver(adp1050_driver);
> +
> +MODULE_AUTHOR("Radu Sabau <[email protected]>");
> +MODULE_DESCRIPTION("Analog Devices ADP1050 HWMON PMBus Driver");
> +MODULE_LICENSE("GPL");
> +MODULE_IMPORT_NS(PMBUS);

Best regards,
Krzysztof


2024-03-18 16:50:54

by Guenter Roeck

[permalink] [raw]
Subject: Re: [PATCH 2/2] hwmon: pmbus: adp1050 : Add driver support

On 3/18/24 09:12, Krzysztof Kozlowski wrote:
> On 18/03/2024 12:21, Radu Sabau wrote:
>> Add support for ADP1050 Digital Controller for Isolated Power Supplies
>> with PMBus interface Voltage, Current and Temperature Monitor.
>>
>
> ...
>
>> +static int adp1050_probe(struct i2c_client *client)
>> +{
>> + u32 vin_scale_monitor, iin_scale_monitor;
>> + int ret;
>> +
>> + if (!i2c_check_functionality(client->adapter,
>> + I2C_FUNC_SMBUS_WRITE_WORD_DATA))
>> + return -ENODEV;
>> +
>> + /* Unlock CHIP's password in order to be able to read/write to it's
>> + * VIN_SCALE and IIN_SCALE registers.
>> + */
>> + ret = i2c_smbus_write_word_data(client, ADP1050_CHIP_PASSWORD, 0xFFFF);
>> + if (ret < 0) {
>> + dev_err_probe(&client->dev, "Device can't be unlocked.\n");
>
> Syntax is: return dev_err_probe(). Same in other places.
>

dev_err_probe() expects the error number as second parameter, so I don't
really understand how the above even compiles.

Guenter


2024-03-18 18:01:30

by Krzysztof Kozlowski

[permalink] [raw]
Subject: Re: [PATCH 2/2] hwmon: pmbus: adp1050 : Add driver support

On 18/03/2024 17:48, Guenter Roeck wrote:
> On 3/18/24 09:12, Krzysztof Kozlowski wrote:
>> On 18/03/2024 12:21, Radu Sabau wrote:
>>> Add support for ADP1050 Digital Controller for Isolated Power Supplies
>>> with PMBus interface Voltage, Current and Temperature Monitor.
>>>
>>
>> ...
>>
>>> +static int adp1050_probe(struct i2c_client *client)
>>> +{
>>> + u32 vin_scale_monitor, iin_scale_monitor;
>>> + int ret;
>>> +
>>> + if (!i2c_check_functionality(client->adapter,
>>> + I2C_FUNC_SMBUS_WRITE_WORD_DATA))
>>> + return -ENODEV;
>>> +
>>> + /* Unlock CHIP's password in order to be able to read/write to it's
>>> + * VIN_SCALE and IIN_SCALE registers.
>>> + */
>>> + ret = i2c_smbus_write_word_data(client, ADP1050_CHIP_PASSWORD, 0xFFFF);
>>> + if (ret < 0) {
>>> + dev_err_probe(&client->dev, "Device can't be unlocked.\n");
>>
>> Syntax is: return dev_err_probe(). Same in other places.
>>
>
> dev_err_probe() expects the error number as second parameter, so I don't
> really understand how the above even compiles.

I did not explain the arguments, because they are obvious... but if you
need so:

return dev_err_probe(&client->dev, ret, "Device can't be unlocked.\n");

Best regards,
Krzysztof


2024-03-18 21:29:32

by kernel test robot

[permalink] [raw]
Subject: Re: [PATCH 2/2] hwmon: pmbus: adp1050 : Add driver support

Hi Radu,

kernel test robot noticed the following build errors:

[auto build test ERROR on groeck-staging/hwmon-next]
[also build test ERROR on robh/for-next linus/master v6.8 next-20240318]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url: https://github.com/intel-lab-lkp/linux/commits/Radu-Sabau/dt-bindings-hwmon-pmbus-adp1050-add-bindings/20240318-202619
base: https://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git hwmon-next
patch link: https://lore.kernel.org/r/20240318112140.385244-3-radu.sabau%40analog.com
patch subject: [PATCH 2/2] hwmon: pmbus: adp1050 : Add driver support
config: m68k-allmodconfig (https://download.01.org/0day-ci/archive/20240319/[email protected]/config)
compiler: m68k-linux-gcc (GCC) 13.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240319/[email protected]/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/

All error/warnings (new ones prefixed by >>):

drivers/hwmon/pmbus/adp1050.c: In function 'adp1050_probe':
>> drivers/hwmon/pmbus/adp1050.c:47:45: warning: passing argument 2 of 'dev_err_probe' makes integer from pointer without a cast [-Wint-conversion]
47 | dev_err_probe(&client->dev, "Device can't be unlocked.\n");
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| |
| char *
In file included from include/linux/device.h:15,
from include/linux/acpi.h:14,
from include/linux/i2c.h:13,
from drivers/hwmon/pmbus/adp1050.c:9:
include/linux/dev_printk.h:277:64: note: expected 'int' but argument is of type 'char *'
277 | __printf(3, 4) int dev_err_probe(const struct device *dev, int err, const char *fmt, ...);
| ~~~~^~~
>> drivers/hwmon/pmbus/adp1050.c:47:17: error: too few arguments to function 'dev_err_probe'
47 | dev_err_probe(&client->dev, "Device can't be unlocked.\n");
| ^~~~~~~~~~~~~
include/linux/dev_printk.h:277:20: note: declared here
277 | __printf(3, 4) int dev_err_probe(const struct device *dev, int err, const char *fmt, ...);
| ^~~~~~~~~~~~~
drivers/hwmon/pmbus/adp1050.c:53:45: warning: passing argument 2 of 'dev_err_probe' makes integer from pointer without a cast [-Wint-conversion]
53 | dev_err_probe(&client->dev, "Device couldn't be unlocked.\n");
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| |
| char *
include/linux/dev_printk.h:277:64: note: expected 'int' but argument is of type 'char *'
277 | __printf(3, 4) int dev_err_probe(const struct device *dev, int err, const char *fmt, ...);
| ~~~~^~~
drivers/hwmon/pmbus/adp1050.c:53:17: error: too few arguments to function 'dev_err_probe'
53 | dev_err_probe(&client->dev, "Device couldn't be unlocked.\n");
| ^~~~~~~~~~~~~
include/linux/dev_printk.h:277:20: note: declared here
277 | __printf(3, 4) int dev_err_probe(const struct device *dev, int err, const char *fmt, ...);
| ^~~~~~~~~~~~~


vim +/dev_err_probe +47 drivers/hwmon/pmbus/adp1050.c

> 9 #include <linux/i2c.h>
10 #include <linux/init.h>
11 #include <linux/kernel.h>
12 #include <linux/module.h>
13 #include <linux/of.h>
14 #include "pmbus.h"
15
16 #define ADP1050_CHIP_PASSWORD 0xD7
17
18 #define ADP1050_VIN_SCALE_MONITOR 0xD8
19 #define ADP1050_IIN_SCALE_MONITOR 0xD9
20
21 static struct pmbus_driver_info adp1050_info = {
22 .pages = 1,
23 .format[PSC_VOLTAGE_IN] = linear,
24 .format[PSC_VOLTAGE_OUT] = linear,
25 .format[PSC_CURRENT_IN] = linear,
26 .format[PSC_TEMPERATURE] = linear,
27 .func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
28 | PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
29 | PMBUS_HAVE_IIN | PMBUS_HAVE_TEMP
30 | PMBUS_HAVE_STATUS_TEMP,
31 };
32
33 static int adp1050_probe(struct i2c_client *client)
34 {
35 u32 vin_scale_monitor, iin_scale_monitor;
36 int ret;
37
38 if (!i2c_check_functionality(client->adapter,
39 I2C_FUNC_SMBUS_WRITE_WORD_DATA))
40 return -ENODEV;
41
42 /* Unlock CHIP's password in order to be able to read/write to it's
43 * VIN_SCALE and IIN_SCALE registers.
44 */
45 ret = i2c_smbus_write_word_data(client, ADP1050_CHIP_PASSWORD, 0xFFFF);
46 if (ret < 0) {
> 47 dev_err_probe(&client->dev, "Device can't be unlocked.\n");
48 return ret;
49 }
50
51 ret = i2c_smbus_write_word_data(client, ADP1050_CHIP_PASSWORD, 0xFFFF);
52 if (ret < 0) {
53 dev_err_probe(&client->dev, "Device couldn't be unlocked.\n");
54 return ret;
55 }
56
57 /* If adi,vin-scale-monitor isn't set or is set to 0 means that the
58 * VIN monitor isn't used, therefore 0 is used as scale in order
59 * for the readings to return 0.
60 */
61 if (device_property_read_u32(&client->dev, "adi,vin-scale-monitor",
62 &vin_scale_monitor))
63 vin_scale_monitor = 0;
64
65 /* If adi,iin-scale-monitor isn't set or is set to 0 means that the
66 * IIN monitor isn't used, therefore 0 is used as scale in order
67 * for the readings to return 0.
68 */
69 if (device_property_read_u32(&client->dev, "adi,iin-scale-monitor",
70 &iin_scale_monitor))
71 iin_scale_monitor = 0;
72
73 ret = i2c_smbus_write_word_data(client, ADP1050_VIN_SCALE_MONITOR,
74 vin_scale_monitor);
75 if (ret < 0)
76 return ret;
77
78 ret = i2c_smbus_write_word_data(client, ADP1050_IIN_SCALE_MONITOR,
79 iin_scale_monitor);
80 if (ret < 0)
81 return ret;
82
83 return pmbus_do_probe(client, &adp1050_info);
84 }
85

--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki

2024-03-19 00:26:34

by kernel test robot

[permalink] [raw]
Subject: Re: [PATCH 2/2] hwmon: pmbus: adp1050 : Add driver support

Hi Radu,

kernel test robot noticed the following build errors:

[auto build test ERROR on groeck-staging/hwmon-next]
[also build test ERROR on robh/for-next linus/master v6.8 next-20240318]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url: https://github.com/intel-lab-lkp/linux/commits/Radu-Sabau/dt-bindings-hwmon-pmbus-adp1050-add-bindings/20240318-202619
base: https://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git hwmon-next
patch link: https://lore.kernel.org/r/20240318112140.385244-3-radu.sabau%40analog.com
patch subject: [PATCH 2/2] hwmon: pmbus: adp1050 : Add driver support
config: hexagon-allmodconfig (https://download.01.org/0day-ci/archive/20240319/[email protected]/config)
compiler: clang version 19.0.0git (https://github.com/llvm/llvm-project 8f68022f8e6e54d1aeae4ed301f5a015963089b7)
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240319/[email protected]/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/

All errors (new ones prefixed by >>):

In file included from drivers/hwmon/pmbus/adp1050.c:9:
In file included from include/linux/i2c.h:19:
In file included from include/linux/regulator/consumer.h:35:
In file included from include/linux/suspend.h:5:
In file included from include/linux/swap.h:9:
In file included from include/linux/memcontrol.h:13:
In file included from include/linux/cgroup.h:26:
In file included from include/linux/kernel_stat.h:9:
In file included from include/linux/interrupt.h:11:
In file included from include/linux/hardirq.h:11:
In file included from ./arch/hexagon/include/generated/asm/hardirq.h:1:
In file included from include/asm-generic/hardirq.h:17:
In file included from include/linux/irq.h:20:
In file included from include/linux/io.h:13:
In file included from arch/hexagon/include/asm/io.h:328:
include/asm-generic/io.h:547:31: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
547 | val = __raw_readb(PCI_IOBASE + addr);
| ~~~~~~~~~~ ^
include/asm-generic/io.h:560:61: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
560 | val = __le16_to_cpu((__le16 __force)__raw_readw(PCI_IOBASE + addr));
| ~~~~~~~~~~ ^
include/uapi/linux/byteorder/little_endian.h:37:51: note: expanded from macro '__le16_to_cpu'
37 | #define __le16_to_cpu(x) ((__force __u16)(__le16)(x))
| ^
In file included from drivers/hwmon/pmbus/adp1050.c:9:
In file included from include/linux/i2c.h:19:
In file included from include/linux/regulator/consumer.h:35:
In file included from include/linux/suspend.h:5:
In file included from include/linux/swap.h:9:
In file included from include/linux/memcontrol.h:13:
In file included from include/linux/cgroup.h:26:
In file included from include/linux/kernel_stat.h:9:
In file included from include/linux/interrupt.h:11:
In file included from include/linux/hardirq.h:11:
In file included from ./arch/hexagon/include/generated/asm/hardirq.h:1:
In file included from include/asm-generic/hardirq.h:17:
In file included from include/linux/irq.h:20:
In file included from include/linux/io.h:13:
In file included from arch/hexagon/include/asm/io.h:328:
include/asm-generic/io.h:573:61: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
573 | val = __le32_to_cpu((__le32 __force)__raw_readl(PCI_IOBASE + addr));
| ~~~~~~~~~~ ^
include/uapi/linux/byteorder/little_endian.h:35:51: note: expanded from macro '__le32_to_cpu'
35 | #define __le32_to_cpu(x) ((__force __u32)(__le32)(x))
| ^
In file included from drivers/hwmon/pmbus/adp1050.c:9:
In file included from include/linux/i2c.h:19:
In file included from include/linux/regulator/consumer.h:35:
In file included from include/linux/suspend.h:5:
In file included from include/linux/swap.h:9:
In file included from include/linux/memcontrol.h:13:
In file included from include/linux/cgroup.h:26:
In file included from include/linux/kernel_stat.h:9:
In file included from include/linux/interrupt.h:11:
In file included from include/linux/hardirq.h:11:
In file included from ./arch/hexagon/include/generated/asm/hardirq.h:1:
In file included from include/asm-generic/hardirq.h:17:
In file included from include/linux/irq.h:20:
In file included from include/linux/io.h:13:
In file included from arch/hexagon/include/asm/io.h:328:
include/asm-generic/io.h:584:33: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
584 | __raw_writeb(value, PCI_IOBASE + addr);
| ~~~~~~~~~~ ^
include/asm-generic/io.h:594:59: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
594 | __raw_writew((u16 __force)cpu_to_le16(value), PCI_IOBASE + addr);
| ~~~~~~~~~~ ^
include/asm-generic/io.h:604:59: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
604 | __raw_writel((u32 __force)cpu_to_le32(value), PCI_IOBASE + addr);
| ~~~~~~~~~~ ^
In file included from drivers/hwmon/pmbus/adp1050.c:9:
In file included from include/linux/i2c.h:19:
In file included from include/linux/regulator/consumer.h:35:
In file included from include/linux/suspend.h:5:
In file included from include/linux/swap.h:9:
In file included from include/linux/memcontrol.h:20:
In file included from include/linux/mm.h:2188:
include/linux/vmstat.h:522:36: warning: arithmetic between different enumeration types ('enum node_stat_item' and 'enum lru_list') [-Wenum-enum-conversion]
522 | return node_stat_name(NR_LRU_BASE + lru) + 3; // skip "nr_"
| ~~~~~~~~~~~ ^ ~~~
>> drivers/hwmon/pmbus/adp1050.c:47:60: error: too few arguments to function call, expected at least 3, have 2
47 | dev_err_probe(&client->dev, "Device can't be unlocked.\n");
| ~~~~~~~~~~~~~ ^
include/linux/dev_printk.h:277:20: note: 'dev_err_probe' declared here
277 | __printf(3, 4) int dev_err_probe(const struct device *dev, int err, const char *fmt, ...);
| ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/hwmon/pmbus/adp1050.c:53:63: error: too few arguments to function call, expected at least 3, have 2
53 | dev_err_probe(&client->dev, "Device couldn't be unlocked.\n");
| ~~~~~~~~~~~~~ ^
include/linux/dev_printk.h:277:20: note: 'dev_err_probe' declared here
277 | __printf(3, 4) int dev_err_probe(const struct device *dev, int err, const char *fmt, ...);
| ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
7 warnings and 2 errors generated.


vim +47 drivers/hwmon/pmbus/adp1050.c

32
33 static int adp1050_probe(struct i2c_client *client)
34 {
35 u32 vin_scale_monitor, iin_scale_monitor;
36 int ret;
37
38 if (!i2c_check_functionality(client->adapter,
39 I2C_FUNC_SMBUS_WRITE_WORD_DATA))
40 return -ENODEV;
41
42 /* Unlock CHIP's password in order to be able to read/write to it's
43 * VIN_SCALE and IIN_SCALE registers.
44 */
45 ret = i2c_smbus_write_word_data(client, ADP1050_CHIP_PASSWORD, 0xFFFF);
46 if (ret < 0) {
> 47 dev_err_probe(&client->dev, "Device can't be unlocked.\n");
48 return ret;
49 }
50
51 ret = i2c_smbus_write_word_data(client, ADP1050_CHIP_PASSWORD, 0xFFFF);
52 if (ret < 0) {
53 dev_err_probe(&client->dev, "Device couldn't be unlocked.\n");
54 return ret;
55 }
56
57 /* If adi,vin-scale-monitor isn't set or is set to 0 means that the
58 * VIN monitor isn't used, therefore 0 is used as scale in order
59 * for the readings to return 0.
60 */
61 if (device_property_read_u32(&client->dev, "adi,vin-scale-monitor",
62 &vin_scale_monitor))
63 vin_scale_monitor = 0;
64
65 /* If adi,iin-scale-monitor isn't set or is set to 0 means that the
66 * IIN monitor isn't used, therefore 0 is used as scale in order
67 * for the readings to return 0.
68 */
69 if (device_property_read_u32(&client->dev, "adi,iin-scale-monitor",
70 &iin_scale_monitor))
71 iin_scale_monitor = 0;
72
73 ret = i2c_smbus_write_word_data(client, ADP1050_VIN_SCALE_MONITOR,
74 vin_scale_monitor);
75 if (ret < 0)
76 return ret;
77
78 ret = i2c_smbus_write_word_data(client, ADP1050_IIN_SCALE_MONITOR,
79 iin_scale_monitor);
80 if (ret < 0)
81 return ret;
82
83 return pmbus_do_probe(client, &adp1050_info);
84 }
85

--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki

2024-03-19 10:47:51

by Radu Sabau

[permalink] [raw]
Subject: RE: [PATCH 2/2] hwmon: pmbus: adp1050 : Add driver support



-----Original Message-----
From: Guenter Roeck <[email protected]> On Behalf Of Guenter Roeck
Sent: Monday, March 18, 2024 5:07 PM
To: Sabau, Radu bogdan <[email protected]>; Jean Delvare <[email protected]>; Rob Herring <[email protected]>; Krzysztof Kozlowski <[email protected]>; Conor Dooley <[email protected]>; Jonathan Corbet <[email protected]>; Delphine CC Chiu <[email protected]>; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]
Subject: Re: [PATCH 2/2] hwmon: pmbus: adp1050 : Add driver support

[External]

On 3/18/24 04:21, Radu Sabau wrote:
> Add support for ADP1050 Digital Controller for Isolated Power Supplies
> with PMBus interface Voltage, Current and Temperature Monitor.
>
> The ADP1050 implements several features to enable a robust
> system of parallel and redundant operation for customers who
> require high availability. The device can measure voltage,
> current and temperature that can be used in different
> techniques to identify and safely shut down an erroneous
> power supply in parallel operation mode.
>
> Signed-off-by: Radu Sabau <[email protected]>
> ---
> Documentation/hwmon/adp1050.rst | 69 ++++++++++++++++++++
> Documentation/hwmon/index.rst | 1 +
> drivers/hwmon/pmbus/Kconfig | 10 +++
> drivers/hwmon/pmbus/Makefile | 1 +
> drivers/hwmon/pmbus/adp1050.c | 111 ++++++++++++++++++++++++++++++++
> 5 files changed, 192 insertions(+)
> create mode 100644 Documentation/hwmon/adp1050.rst
> create mode 100644 drivers/hwmon/pmbus/adp1050.c
>
> diff --git a/Documentation/hwmon/adp1050.rst b/Documentation/hwmon/adp1050.rst
> new file mode 100644
> index 000000000000..e3e5bb650a51
> --- /dev/null
> +++ b/Documentation/hwmon/adp1050.rst
> @@ -0,0 +1,69 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +Kernel driver adp1050
> +=====================
> +
> +Supported chips:
> +
> + * Analog Devices ADP1050
> +
> + Prefix: 'adp1050'
> +
> + Addresses scanned: I2C 0x70 - 0x77
> +
> + Datasheet: https://www.analog.com/media/en/technical-documentation/data-
> +sheets/ADP1050.pdf
> +
> +Authors:
> +
> + - Radu Sabau <[email protected]>
> +
> +
> +Description
> +-----------
> +
> +This driver supprts hardware monitoring for Analog Devices ADP1050 Digital
> +Controller for Isolated Power Supply with PMBus interface.
> +
> +The ADP1050 is an advanced digital controller with a PMBus™
> +interface targeting high density, high efficiency dc-to-dc power
> +conversion used to monitor system temperatures, voltages and currents.
> +Through the PMBus interface, the device can monitor input/output voltages,
> +input current and temperature.
> +
> +Usage Notes
> +-----------
> +
> +This driver does not auto-detect devices. You will have to instantiate
> +the devices explicitly.
> +Please see Documentation/i2c/instantiating-devices.rst for details.
> +
> +The vin scale monitor value and iin scale monitor value can be
> +configured by a device tree property;see
> +Documentation/devicetree/bindings/hwmon/pmbus/adi,adp1050.yaml for details
> +
> +Platform data support
> +---------------------
> +
> +The driver supports standard PMBus driver platform data.
> +
> +Sysfs Attributes
> +----------------
> +
> +================= ========================================
> +in1_label "vin"
> +in1_input Measured input voltage
> +in1_alarm Input voltage alarm
> +in2_label "vout1"
> +in2_input Measured output voltage
> +in2_crit Critical maximum output voltage
> +in2_crit_alarm Output voltage high alarm
> +in2_lcrit Critical minimum output voltage
> +in2_lcrit_alarm Output voltage critical low alarm
> +curr1_label "iin"
> +curr1_input Measured input current.
> +curr1_alarm Input current alarm
> +temp1_input Measured temperature
> +temp1_crit Critical high temperature
> +temp1_crit_alarm Chip temperature critical high alarm
> +================= ========================================
> diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
> index 1ca7a4fe1f8f..9a4fd576e6f6 100644
> --- a/Documentation/hwmon/index.rst
> +++ b/Documentation/hwmon/index.rst
> @@ -33,6 +33,7 @@ Hardware Monitoring Kernel Drivers
> adm1266
> adm1275
> adm9240
> + adp1050
> ads7828
> adt7410
> adt7411
> diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
> index 557ae0c414b0..38e794d83cc3 100644
> --- a/drivers/hwmon/pmbus/Kconfig
> +++ b/drivers/hwmon/pmbus/Kconfig
> @@ -57,6 +57,16 @@ config SENSORS_ADM1275
> This driver can also be built as a module. If so, the module will
> be called adm1275.
>
> +config SENSORS_ADP1050
> + tristate "Analog Devices ADP1050 digital controller for Power Supplies"
> + help
> + If you say yes here you get hardware monitoring support for Analog
> + Devices ADP1050 digital controller for isolated power supply with
> + PMBus interface.
> +
> + This driver can also be built as a module. If so, the module will
> + be called adp1050.
> +
> config SENSORS_BEL_PFE
> tristate "Bel PFE Compatible Power Supplies"
> help
> diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
> index f14ecf03ad77..95a8dea5e5ed 100644
> --- a/drivers/hwmon/pmbus/Makefile
> +++ b/drivers/hwmon/pmbus/Makefile
> @@ -8,6 +8,7 @@ obj-$(CONFIG_SENSORS_PMBUS) += pmbus.o
> obj-$(CONFIG_SENSORS_ACBEL_FSG032) += acbel-fsg032.o
> obj-$(CONFIG_SENSORS_ADM1266) += adm1266.o
> obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o
> +obj-$(CONFIG_SENSORS_ADP1050) += adp1050.o
> obj-$(CONFIG_SENSORS_BEL_PFE) += bel-pfe.o
> obj-$(CONFIG_SENSORS_BPA_RS600) += bpa-rs600.o
> obj-$(CONFIG_SENSORS_DELTA_AHE50DC_FAN) += delta-ahe50dc-fan.o
> diff --git a/drivers/hwmon/pmbus/adp1050.c b/drivers/hwmon/pmbus/adp1050.c
> new file mode 100644
> index 000000000000..53198d858156
> --- /dev/null
> +++ b/drivers/hwmon/pmbus/adp1050.c
> @@ -0,0 +1,111 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Hardware monitoring driver for Analog Devices ADP1050
> + *
> + * Copyright (C) 2024 Analog Devices, Inc.
> + */
> +#include <linux/bits.h>
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include "pmbus.h"
> +
> +#define ADP1050_CHIP_PASSWORD 0xD7
> +
> +#define ADP1050_VIN_SCALE_MONITOR 0xD8
> +#define ADP1050_IIN_SCALE_MONITOR 0xD9
> +
> +static struct pmbus_driver_info adp1050_info = {
> + .pages = 1,
> + .format[PSC_VOLTAGE_IN] = linear,
> + .format[PSC_VOLTAGE_OUT] = linear,
> + .format[PSC_CURRENT_IN] = linear,
> + .format[PSC_TEMPERATURE] = linear,
> + .func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
> + | PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
> + | PMBUS_HAVE_IIN | PMBUS_HAVE_TEMP
> + | PMBUS_HAVE_STATUS_TEMP,
> +};
> +
> +static int adp1050_probe(struct i2c_client *client)
> +{
> + u32 vin_scale_monitor, iin_scale_monitor;
> + int ret;
> +
> + if (!i2c_check_functionality(client->adapter,
> + I2C_FUNC_SMBUS_WRITE_WORD_DATA))
> + return -ENODEV;
> +
> + /* Unlock CHIP's password in order to be able to read/write to it's
> + * VIN_SCALE and IIN_SCALE registers.
> + */
> + ret = i2c_smbus_write_word_data(client, ADP1050_CHIP_PASSWORD, 0xFFFF);
> + if (ret < 0) {
> + dev_err_probe(&client->dev, "Device can't be unlocked.\n");
> + return ret;
> + }
> +

> + ret = i2c_smbus_write_word_data(client, ADP1050_CHIP_PASSWORD, 0xFFFF);
> + if (ret < 0) {
> + dev_err_probe(&client->dev, "Device couldn't be unlocked.\n");
> + return ret;
> + }
> +

The datasheet says that the factory default password is 0xffff. What if it isn't ?
Refusing to instantiate the chip because it can't be unlocked seems a bit extreme.
After all, the password _can_ be changed.

This is indeed a bit extreme, will remove it.

> + /* If adi,vin-scale-monitor isn't set or is set to 0 means that the
> + * VIN monitor isn't used, therefore 0 is used as scale in order
> + * for the readings to return 0.
> + */
> + if (device_property_read_u32(&client->dev, "adi,vin-scale-monitor",
> + &vin_scale_monitor))
> + vin_scale_monitor = 0;
> +
> + /* If adi,iin-scale-monitor isn't set or is set to 0 means that the
> + * IIN monitor isn't used, therefore 0 is used as scale in order
> + * for the readings to return 0.
> + */
> + if (device_property_read_u32(&client->dev, "adi,iin-scale-monitor",
> + &iin_scale_monitor))
> + iin_scale_monitor = 0;
> +

I don't think the "-monitor" extensions in those property names
add any value.

> + ret = i2c_smbus_write_word_data(client, ADP1050_VIN_SCALE_MONITOR,
> + vin_scale_monitor);
> + if (ret < 0)
> + return ret;
> +
> + ret = i2c_smbus_write_word_data(client, ADP1050_IIN_SCALE_MONITOR,
> + iin_scale_monitor);
> + if (ret < 0)
> + return ret;
> +

If vin and iin monitoring is disabled on purpose, why still set
PMBUS_HAVE_VIN and PMBUS_HAVE_IIN above ? Reporting input values as 0
if the values are explicitly not monitored does not make sense to me.

I am puzzled about this to start with. Unless I am missing something,
the data sheet has no indication that VIN monitoring and/or IIN monitoring
is actually turned off if iin_scale/vin_scale are set to 0. Why support
the option to disable them ? That doesn't make sense to me. Please explain
how/when this makes sense. Please also explain why chip support is made
to depend on devicetree support. Register values may have been be set by
rommon/bios or (much more likely) by manufacturing, or users could just
want to keep the chip default. Why force-override it or even force-disable
it ?

At first I made the chip support depend on devicetree support because iin_scale
and vin_scale are values that should be calculated depending on external
hardware components. I tested with with ADP1050DC1-EVALZ board and there is
a resistor divider on the VF (VIN) pin. Although now that you said it, chip support
shouldn't depend on devicetree support, I tested the driver in this way and works the
same, in my case I have a resistor divider and have to modify the scale accordingly
in order for correct readings, and from a user point of view I actually found this way
more suitable.

Thanks,
Guenter

Thanks,
Radu