Convert existing bindings to dtschema to support validation.
This is a straightforward conversion with no new properties.
Signed-off-by: Javier Carrasco <[email protected]>
---
Documentation/devicetree/bindings/hwmon/lm87.txt | 30 ----------
.../devicetree/bindings/hwmon/ti,lm87.yaml | 69 ++++++++++++++++++++++
2 files changed, 69 insertions(+), 30 deletions(-)
diff --git a/Documentation/devicetree/bindings/hwmon/lm87.txt b/Documentation/devicetree/bindings/hwmon/lm87.txt
deleted file mode 100644
index 758ff398b67b..000000000000
--- a/Documentation/devicetree/bindings/hwmon/lm87.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-*LM87 hwmon sensor.
-
-Required properties:
-- compatible: Should be
- "ti,lm87"
-
-- reg: I2C address
-
-optional properties:
-- has-temp3: This configures pins 18 and 19 to be used as a second
- remote temperature sensing channel. By default the pins
- are configured as voltage input pins in0 and in5.
-
-- has-in6: When set, pin 5 is configured to be used as voltage input
- in6. Otherwise the pin is set as FAN1 input.
-
-- has-in7: When set, pin 6 is configured to be used as voltage input
- in7. Otherwise the pin is set as FAN2 input.
-
-- vcc-supply: a Phandle for the regulator supplying power, can be
- configured to measure 5.0V power supply. Default is 3.3V.
-
-Example:
-
-lm87@2e {
- compatible = "ti,lm87";
- reg = <0x2e>;
- has-temp3;
- vcc-supply = <®_5v0>;
-};
diff --git a/Documentation/devicetree/bindings/hwmon/ti,lm87.yaml b/Documentation/devicetree/bindings/hwmon/ti,lm87.yaml
new file mode 100644
index 000000000000..f553235a7321
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ti,lm87.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/ti,lm87.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments LM87 Hardware Monitor
+
+maintainers:
+ - Javier Carrasco <[email protected]>
+
+description: |
+ The LM87 is a serial interface system hardware monitor
+ with remote diode temperature sensing.
+
+ Datasheets:
+ https://www.ti.com/product/LM87
+
+properties:
+ compatible:
+ const: ti,lm87
+
+ reg:
+ maxItems: 1
+
+ has-temp3:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ This configures pins 18 and 19 to be used as a second
+ remote temperature sensing channel. By default the pins
+ are configured as voltage input pins in0 and in5.
+
+ has-in6:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ When set, pin 5 is configured to be used as voltage input
+ in6. Otherwise the pin is set as FAN1 input.
+
+ has-in7:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ When set, pin 6 is configured to be used as voltage input
+ in7. Otherwise the pin is set as FAN2 input.
+
+ vcc-supply:
+ description:
+ Regulator supplying power, can be configured to measure
+ 5.0V power supply. Default is 3.3V.
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hwmon@2e {
+ compatible = "ti,lm87";
+ reg = <0x2e>;
+ has-temp3;
+ vcc-supply = <®_5v0>;
+ };
+ };
--
2.40.1
On 21/03/2024 17:33, Javier Carrasco wrote:
> Convert existing bindings to dtschema to support validation.
>
> This is a straightforward conversion with no new properties.
>
> Signed-off-by: Javier Carrasco <[email protected]>
> ---
Please keep original Co-developed-by with SoB.
Best regards,
Krzysztof
On 21/03/2024 18:46, Krzysztof Kozlowski wrote:
> On 21/03/2024 17:33, Javier Carrasco wrote:
>> Convert existing bindings to dtschema to support validation.
>>
>> This is a straightforward conversion with no new properties.
>>
>> Signed-off-by: Javier Carrasco <[email protected]>
>> ---
>
> Please keep original Co-developed-by with SoB.
Ah, sorry, I missed remark in cover letter. Ignore my comment.
Best regards,
Krzysztof