2024-03-21 02:12:40

by xu.xin16

[permalink] [raw]
Subject:  [PATCH v3] net/ipv4: add tracepoint for icmp_send

From: he peilin <[email protected]>

Introduce a tracepoint for icmp_send, which can help users to get more
detail information conveniently when icmp abnormal events happen.

1. Giving an usecase example:
=============================
When an application experiences packet loss due to an unreachable UDP
destination port, the kernel will send an exception message through the
icmp_send function. By adding a trace point for icmp_send, developers or
system administrators can obtain detailed information about the UDP
packet loss, including the type, code, source address, destination address,
source port, and destination port. This facilitates the trouble-shooting
of UDP packet loss issues especially for those network-service
applications.

2. Operation Instructions:
==========================
Switch to the tracing directory.
cd /sys/kernel/tracing
Filter for destination port unreachable.
echo "type==3 && code==3" > events/icmp/icmp_send/filter
Enable trace event.
echo 1 > events/icmp/icmp_send/enable

3. Result View:
================
udp_client_erro-11370 [002] ...s.12 124.728002:
icmp_send: icmp_send: type=3, code=3.
From 127.0.0.1:41895 to 127.0.0.1:6666 ulen=23
skbaddr=00000000589b167a

Changelog
---------
v2->v3:
Some fixes according to
https://lore.kernel.org/all/[email protected]/
1. Change the tracking directory to/sys/kernel/tracking.
2. Adjust the layout of the TP-STRUCT_entry parameter structure.

v1->v2:
Some fixes according to
https://lore.kernel.org/all/CANn89iL-y9e_VFpdw=sZtRnKRu_tnUwqHuFQTJvJsv-nz1xPDw@mail.gmail.com/
1. adjust the trace_icmp_send() to more protocols than UDP.
2. move the calling of trace_icmp_send after sanity checks
in __icmp_send().

Signed-off-by: Peilin He<[email protected]>
Reviewed-by: xu xin <[email protected]>
Reviewed-by: Yunkai Zhang <[email protected]>
Cc: Yang Yang <[email protected]>
Cc: Liu Chun <[email protected]>
Cc: Xuexin Jiang <[email protected]>
---
include/trace/events/icmp.h | 64 +++++++++++++++++++++++++++++++++++++
net/ipv4/icmp.c | 4 +++
2 files changed, 68 insertions(+)
create mode 100644 include/trace/events/icmp.h

diff --git a/include/trace/events/icmp.h b/include/trace/events/icmp.h
new file mode 100644
index 000000000000..2098d4b1b12e
--- /dev/null
+++ b/include/trace/events/icmp.h
@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM icmp
+
+#if !defined(_TRACE_ICMP_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_ICMP_H
+
+#include <linux/icmp.h>
+#include <linux/tracepoint.h>
+
+TRACE_EVENT(icmp_send,
+
+ TP_PROTO(const struct sk_buff *skb, int type, int code),
+
+ TP_ARGS(skb, type, code),
+
+ TP_STRUCT__entry(
+ __field(const void *, skbaddr)
+ __field(int, type)
+ __field(int, code)
+ __array(__u8, saddr, 4)
+ __array(__u8, daddr, 4)
+ __field(__u16, sport)
+ __field(__u16, dport)
+ __field(unsigned short, ulen)
+ ),
+
+ TP_fast_assign(
+ struct iphdr *iph = ip_hdr(skb);
+ int proto_4 = iph->protocol;
+ __be32 *p32;
+
+ __entry->skbaddr = skb;
+ __entry->type = type;
+ __entry->code = code;
+
+ if (proto_4 == IPPROTO_UDP) {
+ struct udphdr *uh = udp_hdr(skb);
+ __entry->sport = ntohs(uh->source);
+ __entry->dport = ntohs(uh->dest);
+ __entry->ulen = ntohs(uh->len);
+ } else {
+ __entry->sport = 0;
+ __entry->dport = 0;
+ __entry->ulen = 0;
+ }
+
+ p32 = (__be32 *) __entry->saddr;
+ *p32 = iph->saddr;
+
+ p32 = (__be32 *) __entry->daddr;
+ *p32 = iph->daddr;
+ ),
+
+ TP_printk("icmp_send: type=%d, code=%d. From %pI4:%u to %pI4:%u ulen=%d skbaddr=%p",
+ __entry->type, __entry->code,
+ __entry->saddr, __entry->sport, __entry->daddr,
+ __entry->dport, __entry->ulen, __entry->skbaddr)
+);
+
+#endif /* _TRACE_ICMP_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
\ No newline at end of file
diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index e63a3bf99617..21fb41257fe9 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -92,6 +92,8 @@
#include <net/inet_common.h>
#include <net/ip_fib.h>
#include <net/l3mdev.h>
+#define CREATE_TRACE_POINTS
+#include <trace/events/icmp.h>

/*
* Build xmit assembly blocks
@@ -672,6 +674,8 @@ void __icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info,
}
}

+ trace_icmp_send(skb_in, type, code);
+
/* Needed by both icmp_global_allow and icmp_xmit_lock */
local_bh_disable();

--
2.44.0


2024-03-21 02:51:55

by Jason Xing

[permalink] [raw]
Subject: Re: [PATCH v3] net/ipv4: add tracepoint for icmp_send

On Thu, Mar 21, 2024 at 10:12 AM <[email protected]> wrote:
>
> From: he peilin <[email protected]>
>
>
> Introduce a tracepoint for icmp_send, which can help users to get more
>
> detail information conveniently when icmp abnormal events happen.
>
>
> 1. Giving an usecase example:
>
> =============================
>
> When an application experiences packet loss due to an unreachable UDP
>
> destination port, the kernel will send an exception message through the
>
> icmp_send function. By adding a trace point for icmp_send, developers or
>
> system administrators can obtain detailed information about the UDP
>
> packet loss, including the type, code, source address, destination address,
>
> source port, and destination port. This facilitates the trouble-shooting
>
> of UDP packet loss issues especially for those network-service
>
> applications.
>
>
> 2. Operation Instructions:
>
> ==========================
>
> Switch to the tracing directory.
>
> cd /sys/kernel/tracing
>
> Filter for destination port unreachable.
>
> echo "type==3 && code==3" > events/icmp/icmp_send/filter
>
> Enable trace event.
>
> echo 1 > events/icmp/icmp_send/enable
>
>
> 3. Result View:
>
> ================
>
> udp_client_erro-11370 [002] ...s.12 124.728002:
>
> icmp_send: icmp_send: type=3, code=3.
>
> From 127.0.0.1:41895 to 127.0.0.1:6666 ulen=23
>
> skbaddr=00000000589b167a
>
>
> Changelog
>
> ---------
>
> v2->v3:
>
> Some fixes according to
>
> https://lore.kernel.org/all/[email protected]/
>
> 1. Change the tracking directory to/sys/kernel/tracking.
>
> 2. Adjust the layout of the TP-STRUCT_entry parameter structure.
>
>
> v1->v2:
>
> Some fixes according to
>
> https://lore.kernel.org/all/CANn89iL-y9e_VFpdw=sZtRnKRu_tnUwqHuFQTJvJsv-nz1xPDw@mail.gmail.com/
>
> 1. adjust the trace_icmp_send() to more protocols than UDP.
>
> 2. move the calling of trace_icmp_send after sanity checks
>
> in __icmp_send().
>
>
> Signed-off-by: Peilin He<[email protected]>
>
> Reviewed-by: xu xin <[email protected]>
>
> Reviewed-by: Yunkai Zhang <[email protected]>
>
> Cc: Yang Yang <[email protected]>
>
> Cc: Liu Chun <[email protected]>
>
> Cc: Xuexin Jiang <[email protected]>

The format of the whole patch looks strange... Did you send this patch
by using 'git send-email' instead of pasting the text and sending?

>
> ---
>
> include/trace/events/icmp.h | 64 +++++++++++++++++++++++++++++++++++++
>
> net/ipv4/icmp.c | 4 +++
>
> 2 files changed, 68 insertions(+)
>
> create mode 100644 include/trace/events/icmp.h
>
>
> diff --git a/include/trace/events/icmp.h b/include/trace/events/icmp.h
>
> new file mode 100644
>
> index 000000000000..2098d4b1b12e
>
> --- /dev/null
>
> +++ b/include/trace/events/icmp.h
>
> @@ -0,0 +1,64 @@
>
> +/* SPDX-License-Identifier: GPL-2.0 */
>
> +#undef TRACE_SYSTEM
>
> +#define TRACE_SYSTEM icmp
>
> +
>
> +#if !defined(_TRACE_ICMP_H) || defined(TRACE_HEADER_MULTI_READ)
>
> +#define _TRACE_ICMP_H
>
> +
>
> +#include <linux/icmp.h>
>
> +#include <linux/tracepoint.h>
>
> +
>
> +TRACE_EVENT(icmp_send,
>
> +
>
> + TP_PROTO(const struct sk_buff *skb, int type, int code),
>
> +
>
> + TP_ARGS(skb, type, code),
>
> +
>
> + TP_STRUCT__entry(
>
> + __field(const void *, skbaddr)
>
> + __field(int, type)
>
> + __field(int, code)
>
> + __array(__u8, saddr, 4)
>
> + __array(__u8, daddr, 4)
>
> + __field(__u16, sport)
>
> + __field(__u16, dport)
>
> + __field(unsigned short, ulen)
>
> + ),
>
> +
>
> + TP_fast_assign(
>
> + struct iphdr *iph = ip_hdr(skb);
>
> + int proto_4 = iph->protocol;
>
> + __be32 *p32;
>
> +
>
> + __entry->skbaddr = skb;
>
> + __entry->type = type;
>
> + __entry->code = code;
>
> +
>
> + if (proto_4 == IPPROTO_UDP) {
>
> + struct udphdr *uh = udp_hdr(skb);
>
> + __entry->sport = ntohs(uh->source);
>
> + __entry->dport = ntohs(uh->dest);
>
> + __entry->ulen = ntohs(uh->len);
>
> + } else {
>
> + __entry->sport = 0;
>
> + __entry->dport = 0;
>
> + __entry->ulen = 0;
>
> + }
>
> +
>
> + p32 = (__be32 *) __entry->saddr;
>
> + *p32 = iph->saddr;
>
> +
>
> + p32 = (__be32 *) __entry->daddr;
>
> + *p32 = iph->daddr;
>
> + ),
>
> +
>
> + TP_printk("icmp_send: type=%d, code=%d. From %pI4:%u to %pI4:%u ulen=%d skbaddr=%p",
>
> + __entry->type, __entry->code,
>
> + __entry->saddr, __entry->sport, __entry->daddr,
>
> + __entry->dport, __entry->ulen, __entry->skbaddr)
>
> +);
>
> +
>
> +#endif /* _TRACE_ICMP_H */
>
> +
>
> +/* This part must be outside protection */
>
> +#include <trace/define_trace.h>
>
> \ No newline at end of file
>
> diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
>
> index e63a3bf99617..21fb41257fe9 100644
>
> --- a/net/ipv4/icmp.c
>
> +++ b/net/ipv4/icmp.c
>
> @@ -92,6 +92,8 @@
>
> #include <net/inet_common.h>
>
> #include <net/ip_fib.h>
>
> #include <net/l3mdev.h>
>
> +#define CREATE_TRACE_POINTS
>
> +#include <trace/events/icmp.h>
>
>
>
> /*
>
> * Build xmit assembly blocks
>
> @@ -672,6 +674,8 @@ void __icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info,
>
> }
>
> }
>
>
>
> + trace_icmp_send(skb_in, type, code);
>
> +
>
> /* Needed by both icmp_global_allow and icmp_xmit_lock */
>
> local_bh_disable();
>
>
>
> --
>
> 2.44.0
>
>
>
>
>

2024-03-21 13:36:49

by Steven Rostedt

[permalink] [raw]
Subject: Re: [PATCH v3] net/ipv4: add tracepoint for icmp_send

On Thu, 21 Mar 2024 10:45:00 +0800
Jason Xing <[email protected]> wrote:

> The format of the whole patch looks strange... Did you send this patch
> by using 'git send-email' instead of pasting the text and sending?

Yeah, it's uuencoded.

Subject: =?UTF-8?B?wqBbUEFUQ0ggdjNdIG5ldC9pcHY0OiBhZGQgdHJhY2Vwb2ludCBmb3IgaWNtcF9zZW5k?=
Content-Type: multipart/mixed;
boundary="=====_001_next====="
X-MAIL:mse-fl2.zte.com.cn 42L2Ahm2097008
X-Fangmail-Gw-Spam-Type: 0
X-Fangmail-Anti-Spam-Filtered: true
X-Fangmail-MID-QID: 65FB975E.000/4V0TV60kJlz8XrRb



--=====_001_next=====
Content-Type: multipart/related;
boundary="=====_002_next====="


--=====_002_next=====
Content-Type: multipart/alternative;
boundary="=====_003_next====="


--=====_003_next=====
Content-Type: text/plain;
charset="UTF-8"
Content-Transfer-Encoding: base64

-- Steve

2024-03-22 07:42:09

by Denis Kirjanov

[permalink] [raw]
Subject: Re: [PATCH v3] net/ipv4: add tracepoint for icmp_send



On 3/21/24 05:10, [email protected] wrote:
> From: he peilin <[email protected]>
>
> Introduce a tracepoint for icmp_send, which can help users to get more
> detail information conveniently when icmp abnormal events happen.
>
> 1. Giving an usecase example:
> =============================
> When an application experiences packet loss due to an unreachable UDP
> destination port, the kernel will send an exception message through the
> icmp_send function. By adding a trace point for icmp_send, developers or
> system administrators can obtain detailed information about the UDP
> packet loss, including the type, code, source address, destination address,
> source port, and destination port. This facilitates the trouble-shooting
> of UDP packet loss issues especially for those network-service
> applications.
>
> 2. Operation Instructions:
> ==========================
> Switch to the tracing directory.
> cd /sys/kernel/tracing
> Filter for destination port unreachable.
> echo "type==3 && code==3" > events/icmp/icmp_send/filter
> Enable trace event.
> echo 1 > events/icmp/icmp_send/enable
>
> 3. Result View:
> ================
> udp_client_erro-11370 [002] ...s.12 124.728002:
> icmp_send: icmp_send: type=3, code=3.
> From 127.0.0.1:41895 to 127.0.0.1:6666 ulen=23
> skbaddr=00000000589b167a
>
> Changelog
> ---------
> v2->v3:
> Some fixes according to
> https://lore.kernel.org/all/[email protected]/
> 1. Change the tracking directory to/sys/kernel/tracking.
> 2. Adjust the layout of the TP-STRUCT_entry parameter structure.
>
> v1->v2:
> Some fixes according to
> https://lore.kernel.org/all/CANn89iL-y9e_VFpdw=sZtRnKRu_tnUwqHuFQTJvJsv-nz1xPDw@mail.gmail.com/
> 1. adjust the trace_icmp_send() to more protocols than UDP.
> 2. move the calling of trace_icmp_send after sanity checks
> in __icmp_send().

You should target it for net-next

>
> Signed-off-by: Peilin He<[email protected]>
> Reviewed-by: xu xin <[email protected]>
> Reviewed-by: Yunkai Zhang <[email protected]>
> Cc: Yang Yang <[email protected]>
> Cc: Liu Chun <[email protected]>
> Cc: Xuexin Jiang <[email protected]>
> ---
> include/trace/events/icmp.h | 64 +++++++++++++++++++++++++++++++++++++
> net/ipv4/icmp.c | 4 +++
> 2 files changed, 68 insertions(+)
> create mode 100644 include/trace/events/icmp.h
>
> diff --git a/include/trace/events/icmp.h b/include/trace/events/icmp.h
> new file mode 100644
> index 000000000000..2098d4b1b12e
> --- /dev/null
> +++ b/include/trace/events/icmp.h
> @@ -0,0 +1,64 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +#undef TRACE_SYSTEM
> +#define TRACE_SYSTEM icmp
> +
> +#if !defined(_TRACE_ICMP_H) || defined(TRACE_HEADER_MULTI_READ)
> +#define _TRACE_ICMP_H
> +
> +#include <linux/icmp.h>
> +#include <linux/tracepoint.h>
> +
> +TRACE_EVENT(icmp_send,
> +
> + TP_PROTO(const struct sk_buff *skb, int type, int code),
> +
> + TP_ARGS(skb, type, code),
> +
> + TP_STRUCT__entry(
> + __field(const void *, skbaddr)
> + __field(int, type)
> + __field(int, code)
> + __array(__u8, saddr, 4)
> + __array(__u8, daddr, 4)
> + __field(__u16, sport)
> + __field(__u16, dport)
> + __field(unsigned short, ulen)
> + ),
> +
> + TP_fast_assign(
> + struct iphdr *iph = ip_hdr(skb);
> + int proto_4 = iph->protocol;
> + __be32 *p32;
> +
> + __entry->skbaddr = skb;
> + __entry->type = type;
> + __entry->code = code;
> +
> + if (proto_4 == IPPROTO_UDP) {
> + struct udphdr *uh = udp_hdr(skb);
> + __entry->sport = ntohs(uh->source);
> + __entry->dport = ntohs(uh->dest);
> + __entry->ulen = ntohs(uh->len);
> + } else {
> + __entry->sport = 0;
> + __entry->dport = 0;
> + __entry->ulen = 0;
> + }
> +
> + p32 = (__be32 *) __entry->saddr;
> + *p32 = iph->saddr;
> +
> + p32 = (__be32 *) __entry->daddr;
> + *p32 = iph->daddr;
> + ),
> +
> + TP_printk("icmp_send: type=%d, code=%d. From %pI4:%u to %pI4:%u ulen=%d skbaddr=%p",
> + __entry->type, __entry->code,
> + __entry->saddr, __entry->sport, __entry->daddr,
> + __entry->dport, __entry->ulen, __entry->skbaddr)
> +);
> +
> +#endif /* _TRACE_ICMP_H */
> +
> +/* This part must be outside protection */
> +#include <trace/define_trace.h>
> \ No newline at end of file
> diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
> index e63a3bf99617..21fb41257fe9 100644
> --- a/net/ipv4/icmp.c
> +++ b/net/ipv4/icmp.c
> @@ -92,6 +92,8 @@
> #include <net/inet_common.h>
> #include <net/ip_fib.h>
> #include <net/l3mdev.h>
> +#define CREATE_TRACE_POINTS
> +#include <trace/events/icmp.h>
>
> /*
> * Build xmit assembly blocks
> @@ -672,6 +674,8 @@ void __icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info,
> }
> }
>
> + trace_icmp_send(skb_in, type, code);
> +
> /* Needed by both icmp_global_allow and icmp_xmit_lock */
> local_bh_disable();
>