2024-03-22 11:53:13

by Dmitry Baryshkov

Subject: [PATCH 2/2] dt-bindings: usb: qcom,pmic-typec: update example to follow connector schema

Update Qualcomm PMIC Type-C examples to follow the USB-C connector
schema. The USB-C connector should have three ports (USB HS @0,
SSTX/RX @1 and SBU @2 lanes). Reorder ports accordingly and add SBU port
connected to the SBU mux (e.g. FSA4480).

Fixes: 00bb478b829e ("dt-bindings: usb: Add Qualcomm PMIC Type-C")
Reported-by: Luca Weiss <[email protected]>
Signed-off-by: Dmitry Baryshkov <[email protected]>
---
.../devicetree/bindings/usb/qcom,pmic-typec.yaml | 34 +++++++++++++++++-----
1 file changed, 26 insertions(+), 8 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
index 63020a88a355..beecbda40e3c 100644
--- a/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
@@ -187,15 +187,22 @@ examples:

port@0 {
reg = <0>;
- pmic_typec_mux_out: endpoint {
- remote-endpoint = <&usb_phy_typec_mux_in>;
+ pmic_typec_hs_in: endpoint {
+ remote-endpoint = <&usb_hs_out>;
};
};

port@1 {
reg = <1>;
- pmic_typec_role_switch_out: endpoint {
- remote-endpoint = <&usb_role_switch_in>;
+ pmic_typec_ss_in: endpoint {
+ remote-endpoint = <&usb_phy_typec_ss_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ pmic_typec_sbu: endpoint {
+ remote-endpoint = <&usb_mux_sbu>;
};
};
};
@@ -207,8 +214,8 @@ examples:
dr_mode = "otg";
usb-role-switch;
port {
- usb_role_switch_in: endpoint {
- remote-endpoint = <&pmic_typec_role_switch_out>;
+ usb_hs_out: endpoint {
+ remote-endpoint = <&pmic_typec_hs_in>;
};
};
};
@@ -216,8 +223,19 @@ examples:
usb-phy {
orientation-switch;
port {
- usb_phy_typec_mux_in: endpoint {
- remote-endpoint = <&pmic_typec_mux_out>;
+ usb_phy_typec_ss_out: endpoint {
+ remote-endpoint = <&pmic_typec_ss_in>;
+ };
+ };
+ };
+
+ usb-mux {
+ orientation-switch;
+ mode-switch;
+
+ port {
+ usb_mux_sbu: endpoint {
+ remote-endpoint = <&pmic_typec_sbu>;
};
};
};

--
2.39.2

2024-03-22 18:35:04

by Konrad Dybcio

Subject: Re: [PATCH 2/2] dt-bindings: usb: qcom,pmic-typec: update example to follow connector schema

On 22.03.2024 12:52, Dmitry Baryshkov wrote:
> Update Qualcomm PMIC Type-C examples to follow the USB-C connector
> schema. The USB-C connector should have three ports (USB HS @0,
> SSTX/RX @1 and SBU @2 lanes). Reorder ports accordingly and add SBU port
> connected to the SBU mux (e.g. FSA4480).
>
> Fixes: 00bb478b829e ("dt-bindings: usb: Add Qualcomm PMIC Type-C")
> Reported-by: Luca Weiss <[email protected]>
> Signed-off-by: Dmitry Baryshkov <[email protected]>
> ---

Acked-by: Konrad Dybcio <[email protected]>

Konrad