2024-03-26 07:56:16

by Patrice CHOTARD

Subject: [PATCH v2] ARM: dts: stm32: add heartbeat led for stm32mp157c-ed1

From: Patrice Chotard <[email protected]>

Add heartbeat led for stm32mp157c-ed1.

Signed-off-by: Patrice Chotard <[email protected]>
---

V2 changes :
_ add color and function properties.

arch/arm/boot/dts/st/stm32mp157c-ed1.dts | 12 ++++++++++++
1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/st/stm32mp157c-ed1.dts b/arch/arm/boot/dts/st/stm32mp157c-ed1.dts
index 66ed5f9921ba..525d9ca7d576 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-ed1.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-ed1.dts
@@ -10,6 +10,7 @@
#include "stm32mp15-pinctrl.dtsi"
#include "stm32mp15xxaa-pinctrl.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/mfd/st,stpmic1.h>

/ {
@@ -24,6 +25,17 @@ chosen {
stdout-path = "serial0:115200n8";
};

+ led {
+ compatible = "gpio-leds";
+ led-blue {
+ gpios = <&gpiod 9 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ function = LED_FUNCTION_HEARTBEAT;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ };
+
memory@c0000000 {
device_type = "memory";
reg = <0xC0000000 0x40000000>;
--
2.25.1

2024-04-08 08:58:54

by Alexandre TORGUE

Subject: Re: [PATCH v2] ARM: dts: stm32: add heartbeat led for stm32mp157c-ed1

Hi Patrice

On 3/26/24 08:54, [email protected] wrote:
> From: Patrice Chotard <[email protected]>
>
> Add heartbeat led for stm32mp157c-ed1.
>
> Signed-off-by: Patrice Chotard <[email protected]>
> ---
>
> V2 changes :
> _ add color and function properties.
>
> arch/arm/boot/dts/st/stm32mp157c-ed1.dts | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm/boot/dts/st/stm32mp157c-ed1.dts b/arch/arm/boot/dts/st/stm32mp157c-ed1.dts
> index 66ed5f9921ba..525d9ca7d576 100644
> --- a/arch/arm/boot/dts/st/stm32mp157c-ed1.dts
> +++ b/arch/arm/boot/dts/st/stm32mp157c-ed1.dts
> @@ -10,6 +10,7 @@
> #include "stm32mp15-pinctrl.dtsi"
> #include "stm32mp15xxaa-pinctrl.dtsi"
> #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/leds/common.h>
> #include <dt-bindings/mfd/st,stpmic1.h>
>
> / {
> @@ -24,6 +25,17 @@ chosen {
> stdout-path = "serial0:115200n8";
> };
>
> + led {
> + compatible = "gpio-leds";
> + led-blue {
> + gpios = <&gpiod 9 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "heartbeat";
> + default-state = "off";
> + function = LED_FUNCTION_HEARTBEAT;
> + color = <LED_COLOR_ID_BLUE>;
> + };
> + };
> +
> memory@c0000000 {
> device_type = "memory";
> reg = <0xC0000000 0x40000000>;

Applied on stm32-next.

thanks
Alex