Update binding doc to avoid warning.
Change from v1 to v2
- Fixed dts DTB_CHECK warning
Signed-off-by: Frank Li <[email protected]>
---
Changes in v8:
binding:
- Add rob's review tag
dts:
- Add fixed patch to fix sai0 lpcg index
- Update other node lpcg index
- Remove extra space after =
- Link to v7: https://lore.kernel.org/r/[email protected]
Changes in v7:
- Using rob method for dma-names
- Drop conor acked tag form dma-names and interrupt patches
- Fixed warning for interrupts
- Pass dt_bindng check
make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- -j8 dt_binding_check DT_SCHEMA_FILES=fsl,sai.yaml
LINT Documentation/devicetree/bindings
DTEX Documentation/devicetree/bindings/sound/fsl,sai.example.dts
CHKDT Documentation/devicetree/bindings/processed-schema.json
SCHEMA Documentation/devicetree/bindings/processed-schema.json
DTC_CHK Documentation/devicetree/bindings/sound/fsl,sai.example.dtb
make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- -j8 dt_binding_check DT_SCHEMA_FILES=fsl,spdif.yaml
LINT Documentation/devicetree/bindings
DTEX Documentation/devicetree/bindings/sound/fsl,spdif.example.dts
CHKDT Documentation/devicetree/bindings/processed-schema.json
SCHEMA Documentation/devicetree/bindings/processed-schema.json
DTC_CHK Documentation/devicetree/bindings/sound/fsl,spdif.example.dtb
make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- -j8 dt_binding_check DT_SCHEMA_FILES=fsl,imx-asrc.yaml
LINT Documentation/devicetree/bindings
DTEX Documentation/devicetree/bindings/sound/fsl,imx-asrc.example.dts
CHKDT Documentation/devicetree/bindings/processed-schema.json
SCHEMA Documentation/devicetree/bindings/processed-schema.json
DTC_CHK Documentation/devicetree/bindings/sound/fsl,imx-asrc.example.dtb
- Pass DTB_CHECK, below warning exist because binding doc still be txt.
from schema $id: http://devicetree.org/schemas/dma/fsl,edma.yaml#
arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: /bus@59000000/amix@59840000: failed to match any schema with compatible: ['fsl,imx8qm-audmix']
- Link to v6: https://lore.kernel.org/r/[email protected]
Changes in v6:
- Add interrupt description in binding doc according to rob suggestion
- Link to v5: https://lore.kernel.org/r/[email protected]
Changes in v5:
- using rob's suggest logic after fix maxItems.
- sort dts nodes.
- remove spdif1. Add later when do 8qm upstream
- Link to v4: https://lore.kernel.org/r/[email protected]
Changes in v4:
Combine comments' from v2 and v3. I hope I address everythings.
- Krzysztof's comments
- add reson about why change
- rob's comments
using rob's suggest logic to restrict interrupt number
but for dma-names, still need use oneOf to cover 3 case
- [rx, tx]
- [rx]
- [tx]
oneOf
- items:
- tx
- rx
- enums: [rx, tx]
- Conor's comments
- add power-domains required for imx8qxp and imx8qm
- remove dmas descript, not allow use index to get dma-channel. Current
no user using this method.
- Link to v3: https://lore.kernel.org/r/[email protected]
Changes in v3:
- Fixed dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/fsl,spdif.example.dtb: spdif@2004000: interrupts: [[0, 52, 4]] is too short
from schema $id: http://devicetree.org/schemas/sound/fsl,spdif.yaml#
- Link to v2: https://lore.kernel.org/r/[email protected]
---
Frank Li (5):
ASoC: dt-bindings: fsl,imx-asrc/spdif: Add power-domains property
ASoC: dt-bindings: fsl,imx-asrc: update max interrupt numbers
ASoC: dt-bindings: fsl-sai: allow only one dma-names
arm64: dts: imx8: fix audio lpcg index
arm64: dts: imx8qxp: add asrc[0,1], esai0, spdif0 and sai[4,5]
.../devicetree/bindings/sound/fsl,imx-asrc.yaml | 14 +
.../devicetree/bindings/sound/fsl,sai.yaml | 6 +-
.../devicetree/bindings/sound/fsl,spdif.yaml | 35 ++-
arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi | 285 ++++++++++++++++++++-
4 files changed, 327 insertions(+), 13 deletions(-)
---
base-commit: 8552c902efe7ef670b6961fb8885b67961aeb629
change-id: 20240227-asrc_8qxp-25aa6783840f
Best regards,
---
Frank Li <[email protected]>
lpcg cell0 should be clock's 'indices' instead of 'index'.
imx_lpcg_of_clk_src_get(struct of_phandle_args *clkspec, void *data)
{
struct clk_hw_onecell_data *hw_data = data;
unsigned int idx = clkspec->args[0] / 4;
....
}
<@sai0_lpcg 1> will be the same as <@sai_lpcg 0>.
Replace 0 with IMX_LPCG_CLK_0 and replace 1 with IMX_LPCG_CLK_4.
It can work at iMX8QXP because IMX_LPCG_CLK_4 is ipg clock, which already
enabled. But for iMX8QM IMX_LPCG_CLK_4 is mclk, which trigger issue.
Fixes: 0a9279e9ae88 ("arm64: dts: imx8qxp: Add audio SAI nodes")
Signed-off-by: Frank Li <[email protected]>
---
arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
index 07afeb78ed564..d8bbe53320bce 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
@@ -123,9 +123,9 @@ sai0: sai@59040000 {
compatible = "fsl,imx8qm-sai";
reg = <0x59040000 0x10000>;
interrupts = <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&sai0_lpcg 1>,
+ clocks = <&sai0_lpcg IMX_LPCG_CLK_4>,
<&clk_dummy>,
- <&sai0_lpcg 0>,
+ <&sai0_lpcg IMX_LPCG_CLK_0>,
<&clk_dummy>,
<&clk_dummy>;
clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
@@ -139,9 +139,9 @@ sai1: sai@59050000 {
compatible = "fsl,imx8qm-sai";
reg = <0x59050000 0x10000>;
interrupts = <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&sai1_lpcg 1>,
+ clocks = <&sai1_lpcg IMX_LPCG_CLK_4>,
<&clk_dummy>,
- <&sai1_lpcg 0>,
+ <&sai1_lpcg IMX_LPCG_CLK_0>,
<&clk_dummy>,
<&clk_dummy>;
clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
@@ -155,9 +155,9 @@ sai2: sai@59060000 {
compatible = "fsl,imx8qm-sai";
reg = <0x59060000 0x10000>;
interrupts = <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&sai2_lpcg 1>,
+ clocks = <&sai2_lpcg IMX_LPCG_CLK_4>,
<&clk_dummy>,
- <&sai2_lpcg 0>,
+ <&sai2_lpcg IMX_LPCG_CLK_0>,
<&clk_dummy>,
<&clk_dummy>;
clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
@@ -171,9 +171,9 @@ sai3: sai@59070000 {
compatible = "fsl,imx8qm-sai";
reg = <0x59070000 0x10000>;
interrupts = <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&sai3_lpcg 1>,
+ clocks = <&sai3_lpcg IMX_LPCG_CLK_4>,
<&clk_dummy>,
- <&sai3_lpcg 0>,
+ <&sai3_lpcg IMX_LPCG_CLK_0>,
<&clk_dummy>,
<&clk_dummy>;
clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
--
2.34.1
Add asrc[0,1], esai0, spdif0, sai[4,5] and related lpcg node for
imx8 audio subsystem.
Signed-off-by: Frank Li <[email protected]>
---
arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi | 269 +++++++++++++++++++++++
1 file changed, 269 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
index d8bbe53320bce..897cbb7b67422 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
@@ -6,6 +6,7 @@
#include <dt-bindings/clock/imx8-clock.h>
#include <dt-bindings/clock/imx8-lpcg.h>
+#include <dt-bindings/dma/fsl-edma.h>
#include <dt-bindings/firmware/imx/rsrc.h>
audio_ipg_clk: clock-audio-ipg {
@@ -119,6 +120,89 @@ audio_subsys: bus@59000000 {
#size-cells = <1>;
ranges = <0x59000000 0x0 0x59000000 0x1000000>;
+ asrc0: asrc@59000000 {
+ compatible = "fsl,imx8qm-asrc";
+ reg = <0x59000000 0x10000>;
+ interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&asrc0_lpcg IMX_LPCG_CLK_0>,
+ <&asrc0_lpcg IMX_LPCG_CLK_0>,
+ <&aud_pll_div0_lpcg IMX_LPCG_CLK_4>,
+ <&aud_pll_div1_lpcg IMX_LPCG_CLK_4>,
+ <&acm IMX_ADMA_ACM_AUD_CLK0_SEL>,
+ <&acm IMX_ADMA_ACM_AUD_CLK1_SEL>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>;
+ clock-names = "mem", "ipg",
+ "asrck_0", "asrck_1", "asrck_2", "asrck_3",
+ "asrck_4", "asrck_5", "asrck_6", "asrck_7",
+ "asrck_8", "asrck_9", "asrck_a", "asrck_b",
+ "asrck_c", "asrck_d", "asrck_e", "asrck_f",
+ "spba";
+ dmas = <&edma0 0 0 0>,
+ <&edma0 1 0 0>,
+ <&edma0 2 0 0>,
+ <&edma0 3 0 FSL_EDMA_RX>,
+ <&edma0 4 0 FSL_EDMA_RX>,
+ <&edma0 5 0 FSL_EDMA_RX>;
+ /* tx* is output channel of asrc, it is rx channel for eDMA */
+ dma-names = "rxa", "rxb", "rxc", "txa", "txb", "txc";
+ fsl,asrc-rate = <8000>;
+ fsl,asrc-width = <16>;
+ fsl,asrc-clk-map = <0>;
+ power-domains = <&pd IMX_SC_R_ASRC_0>;
+ status = "disabled";
+ };
+
+ esai0: esai@59010000 {
+ compatible = "fsl,imx8qm-esai";
+ reg = <0x59010000 0x10000>;
+ interrupts = <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&esai0_lpcg IMX_LPCG_CLK_4>,
+ <&esai0_lpcg IMX_LPCG_CLK_0>,
+ <&esai0_lpcg IMX_LPCG_CLK_4>,
+ <&clk_dummy>;
+ clock-names = "core", "extal", "fsys", "spba";
+ dmas = <&edma0 6 0 FSL_EDMA_RX>, <&edma0 7 0 0>;
+ dma-names = "rx", "tx";
+ power-domains = <&pd IMX_SC_R_ESAI_0>;
+ status = "disabled";
+ };
+
+ spdif0: spdif@59020000 {
+ compatible = "fsl,imx8qm-spdif";
+ reg = <0x59020000 0x10000>;
+ interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>, /* rx */
+ <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>; /* tx */
+ clocks = <&spdif0_lpcg IMX_LPCG_CLK_4>, /* core */
+ <&clk_dummy>, /* rxtx0 */
+ <&spdif0_lpcg IMX_LPCG_CLK_0>, /* rxtx1 */
+ <&clk_dummy>, /* rxtx2 */
+ <&clk_dummy>, /* rxtx3 */
+ <&clk_dummy>, /* rxtx4 */
+ <&audio_ipg_clk>, /* rxtx5 */
+ <&clk_dummy>, /* rxtx6 */
+ <&clk_dummy>, /* rxtx7 */
+ <&clk_dummy>; /* spba */
+ clock-names = "core", "rxtx0", "rxtx1", "rxtx2", "rxtx3", "rxtx4",
+ "rxtx5", "rxtx6", "rxtx7", "spba";
+ dmas = <&edma0 8 0 (FSL_EDMA_MULTI_FIFO | FSL_EDMA_RX)>,
+ <&edma0 9 0 FSL_EDMA_MULTI_FIFO>;
+ dma-names = "rx", "tx";
+ power-domains = <&pd IMX_SC_R_SPDIF_0>;
+ status = "disabled";
+ };
+
sai0: sai@59040000 {
compatible = "fsl,imx8qm-sai";
reg = <0x59040000 0x10000>;
@@ -239,6 +323,40 @@ edma0: dma-controller@591f0000 {
<&pd IMX_SC_R_DMA_0_CH23>;
};
+ asrc0_lpcg: clock-controller@59400000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x59400000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&audio_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_4>;
+ clock-output-names = "asrc0_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_ASRC_0>;
+ };
+
+ esai0_lpcg: clock-controller@59410000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x59410000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&acm IMX_ADMA_ACM_ESAI0_MCLK_SEL>,
+ <&audio_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "esai0_lpcg_extal_clk",
+ "esai0_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_ESAI_0>;
+ };
+
+ spdif0_lpcg: clock-controller@59420000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x59420000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&acm IMX_ADMA_ACM_SPDIF0_TX_CLK_SEL>,
+ <&audio_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "spdif0_lpcg_tx_clk",
+ "spdif0_lpcg_gclkw";
+ power-domains = <&pd IMX_SC_R_SPDIF_0>;
+ };
+
sai0_lpcg: clock-controller@59440000 {
compatible = "fsl,imx8qxp-lpcg";
reg = <0x59440000 0x10000>;
@@ -333,6 +451,101 @@ dsp: dsp@596e8000 {
status = "disabled";
};
+ asrc1: asrc@59800000 {
+ compatible = "fsl,imx8qm-asrc";
+ reg = <0x59800000 0x10000>;
+ interrupts = <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&asrc1_lpcg IMX_LPCG_CLK_4>,
+ <&asrc1_lpcg IMX_LPCG_CLK_4>,
+ <&aud_pll_div0_lpcg IMX_LPCG_CLK_0>,
+ <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>,
+ <&acm IMX_ADMA_ACM_AUD_CLK0_SEL>,
+ <&acm IMX_ADMA_ACM_AUD_CLK1_SEL>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>;
+ clock-names = "mem", "ipg",
+ "asrck_0", "asrck_1", "asrck_2", "asrck_3",
+ "asrck_4", "asrck_5", "asrck_6", "asrck_7",
+ "asrck_8", "asrck_9", "asrck_a", "asrck_b",
+ "asrck_c", "asrck_d", "asrck_e", "asrck_f",
+ "spba";
+ dmas = <&edma1 0 0 0>,
+ <&edma1 1 0 0>,
+ <&edma1 2 0 0>,
+ <&edma1 3 0 FSL_EDMA_RX>,
+ <&edma1 4 0 FSL_EDMA_RX>,
+ <&edma1 5 0 FSL_EDMA_RX>;
+ /* tx* is output channel of asrc, it is rx channel for eDMA */
+ dma-names = "rxa", "rxb", "rxc", "txa", "txb", "txc";
+ fsl,asrc-rate = <8000>;
+ fsl,asrc-width = <16>;
+ fsl,asrc-clk-map = <1>;
+ power-domains = <&pd IMX_SC_R_ASRC_1>;
+ status = "disabled";
+ };
+
+ sai4: sai@59820000 {
+ compatible = "fsl,imx8qm-sai";
+ reg = <0x59820000 0x10000>;
+ interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sai4_lpcg IMX_LPCG_CLK_4>,
+ <&clk_dummy>,
+ <&sai4_lpcg IMX_LPCG_CLK_0>,
+ <&clk_dummy>,
+ <&clk_dummy>;
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+ dmas = <&edma1 8 0 FSL_EDMA_RX>, <&edma1 9 0 0>;
+ dma-names = "rx", "tx";
+ power-domains = <&pd IMX_SC_R_SAI_4>;
+ status = "disabled";
+ };
+
+ sai5: sai@59830000 {
+ compatible = "fsl,imx8qm-sai";
+ reg = <0x59830000 0x10000>;
+ interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sai5_lpcg IMX_LPCG_CLK_4>,
+ <&clk_dummy>,
+ <&sai5_lpcg IMX_LPCG_CLK_0>,
+ <&clk_dummy>,
+ <&clk_dummy>;
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+ dmas = <&edma1 10 0 0>;
+ dma-names = "tx";
+ power-domains = <&pd IMX_SC_R_SAI_5>;
+ status = "disabled";
+ };
+
+ amix: amix@59840000 {
+ compatible = "fsl,imx8qm-audmix";
+ reg = <0x59840000 0x10000>;
+ clocks = <&amix_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "ipg";
+ power-domains = <&pd IMX_SC_R_AMIX>;
+ dais = <&sai4>, <&sai5>;
+ status = "disabled";
+ };
+
+ mqs: mqs@59850000 {
+ compatible = "fsl,imx8qm-mqs";
+ reg = <0x59850000 0x10000>;
+ clocks = <&mqs0_lpcg IMX_LPCG_CLK_4>, <&mqs0_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "mclk", "core";
+ power-domains = <&pd IMX_SC_R_MQS_0>;
+ status = "disabled";
+ };
+
edma1: dma-controller@599f0000 {
compatible = "fsl,imx8qm-edma";
reg = <0x599f0000 0xc0000>;
@@ -481,4 +694,60 @@ acm: acm@59e00000 {
"sai3_rx_bclk",
"sai4_rx_bclk";
};
+
+ asrc1_lpcg: clock-controller@59c00000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x59c00000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&audio_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_4>;
+ clock-output-names = "asrc1_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_ASRC_1>;
+ };
+
+ sai4_lpcg: clock-controller@59c20000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x59c20000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&acm IMX_ADMA_ACM_SAI4_MCLK_SEL>,
+ <&audio_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "sai4_lpcg_mclk",
+ "sai4_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_SAI_4>;
+ };
+
+ sai5_lpcg: clock-controller@59c30000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x59c30000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&acm IMX_ADMA_ACM_SAI5_MCLK_SEL>,
+ <&audio_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "sai5_lpcg_mclk",
+ "sai5_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_SAI_5>;
+ };
+
+ amix_lpcg: clock-controller@59c40000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x59c40000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&audio_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "amix_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_AMIX>;
+ };
+
+ mqs0_lpcg: clock-controller@59c50000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x59c50000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&acm IMX_ADMA_ACM_MQS_TX_CLK_SEL>,
+ <&audio_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "mqs0_lpcg_mclk",
+ "mqs0_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_MQS_0>;
+ };
};
--
2.34.1
On Thu, 28 Mar 2024 10:51:32 -0400, Frank Li wrote:
> Update binding doc to avoid warning.
> Change from v1 to v2
> - Fixed dts DTB_CHECK warning
>
>
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/5] ASoC: dt-bindings: fsl,imx-asrc/spdif: Add power-domains property
commit: 9b21531866fced634bcc7fca33667c7ef258433f
[2/5] ASoC: dt-bindings: fsl,imx-asrc: update max interrupt numbers
commit: 82330327ce03889f20072cef5167499d51cdf260
[3/5] ASoC: dt-bindings: fsl-sai: allow only one dma-names
commit: 7b5f2072657a9041cbaf4ba139f672be11694ca3
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
On Thu, Mar 28, 2024 at 10:51:36AM -0400, Frank Li wrote:
> lpcg cell0 should be clock's 'indices' instead of 'index'.
>
> imx_lpcg_of_clk_src_get(struct of_phandle_args *clkspec, void *data)
> {
> struct clk_hw_onecell_data *hw_data = data;
> unsigned int idx = clkspec->args[0] / 4;
>
> ....
> }
>
> <@sai0_lpcg 1> will be the same as <@sai_lpcg 0>.
>
> Replace 0 with IMX_LPCG_CLK_0 and replace 1 with IMX_LPCG_CLK_4.
>
> It can work at iMX8QXP because IMX_LPCG_CLK_4 is ipg clock, which already
> enabled. But for iMX8QM IMX_LPCG_CLK_4 is mclk, which trigger issue.
>
> Fixes: 0a9279e9ae88 ("arm64: dts: imx8qxp: Add audio SAI nodes")
> Signed-off-by: Frank Li <[email protected]>
Applied, thanks!
On Thu, Mar 28, 2024 at 10:51:37AM -0400, Frank Li wrote:
> Add asrc[0,1], esai0, spdif0, sai[4,5] and related lpcg node for
> imx8 audio subsystem.
>
> Signed-off-by: Frank Li <[email protected]>
Applied, thanks!