Add WDIOF_EXTERN1 and WDIOF_CARDRESET bootstatus in ast2500/ast2600
Regarding the AST2600 specification, the WDTn Timeout Status Register
(WDT10) has bit 1 reserved. Bit 1 of the status register indicates
on ast2500 if the boot was from the second boot source.
It does not indicate that the most recent reset was triggered by
the watchdog. The code should just be changed to set WDIOF_CARDRESET
if bit 0 of the status register is set.
Include SCU register to veriy WDIOF_EXTERN1 in ast2600 SCU74 or
ast2500 SCU3C when bit1 is set.
v4 -> v5
- Revert indentation.
v3 -> v4
- Add error handling for syscon_regmap_lookup_by_phandle and
regmap_read.
v2 -> v3
- Fixed WDIOF_CARDRESET status bit check and added support
for WDIOF_EXTERN1 on ast2500 and ast2600.
v1 -> v2
- Add comment and support WDIOF_CARDRESET in ast2600
v1
- Patch 0001 - Add WDIOF_EXTERN1 bootstatus
---
Peter Yin (4):
ARM: dts: aspeed: Add the AST2500 WDT with SCU register
ARM: dts: aspeed: Add the AST2600 WDT with SCU register
dt-bindings: watchdog: aspeed-wdt: Add aspeed,scu
drivers: watchdog: ast2500 and ast2600 support bootstatus
.../bindings/watchdog/aspeed-wdt.txt | 4 +++
arch/arm/boot/dts/aspeed/aspeed-g5.dtsi | 3 ++
arch/arm/boot/dts/aspeed/aspeed-g6.dtsi | 4 +++
drivers/watchdog/aspeed_wdt.c | 34 ++++++++++++++++---
4 files changed, 41 insertions(+), 4 deletions(-)
--
2.25.1
The AST2500 WDT references the System Control Unit
register for its operation.
Signed-off-by: Peter Yin <[email protected]>
---
arch/arm/boot/dts/aspeed/aspeed-g5.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
index 04f98d1dbb97..5fd12c057c31 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
@@ -410,12 +410,14 @@ wdt1: watchdog@1e785000 {
compatible = "aspeed,ast2500-wdt";
reg = <0x1e785000 0x20>;
clocks = <&syscon ASPEED_CLK_APB>;
+ aspeed,scu = <&syscon>;
};
wdt2: watchdog@1e785020 {
compatible = "aspeed,ast2500-wdt";
reg = <0x1e785020 0x20>;
clocks = <&syscon ASPEED_CLK_APB>;
+ aspeed,scu = <&syscon>;
};
wdt3: watchdog@1e785040 {
@@ -423,6 +425,7 @@ wdt3: watchdog@1e785040 {
reg = <0x1e785040 0x20>;
clocks = <&syscon ASPEED_CLK_APB>;
status = "disabled";
+ aspeed,scu = <&syscon>;
};
pwm_tacho: pwm-tacho-controller@1e786000 {
--
2.25.1
The AST2600 Watchdog Timer (WDT) references
the System Control Unit (SCU) register for its operation.
Signed-off-by: Peter Yin <[email protected]>
---
arch/arm/boot/dts/aspeed/aspeed-g6.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
index ead835fca657..b47850f0dca0 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
@@ -557,23 +557,27 @@ uart5: serial@1e784000 {
wdt1: watchdog@1e785000 {
compatible = "aspeed,ast2600-wdt";
reg = <0x1e785000 0x40>;
+ aspeed,scu = <&syscon>;
};
wdt2: watchdog@1e785040 {
compatible = "aspeed,ast2600-wdt";
reg = <0x1e785040 0x40>;
+ aspeed,scu = <&syscon>;
status = "disabled";
};
wdt3: watchdog@1e785080 {
compatible = "aspeed,ast2600-wdt";
reg = <0x1e785080 0x40>;
+ aspeed,scu = <&syscon>;
status = "disabled";
};
wdt4: watchdog@1e7850c0 {
compatible = "aspeed,ast2600-wdt";
reg = <0x1e7850C0 0x40>;
+ aspeed,scu = <&syscon>;
status = "disabled";
};
--
2.25.1
Add WDIOF_EXTERN1 and WDIOF_CARDRESET bootstatus in ast2600
Regarding the AST2600 specification, the WDTn Timeout Status Register
(WDT10) has bit 1 reserved. Bit 1 of the status register indicates
on ast2500 if the boot was from the second boot source.
It does not indicate that the most recent reset was triggered by
the watchdog. The code should just be changed to set WDIOF_CARDRESET
if bit 0 of the status register is set.
Include SCU register to veriy WDIOF_EXTERN1 in ast2600 SCU74 or
ast2500 SCU3C when bit1 is set.
Signed-off-by: Peter Yin <[email protected]>
---
drivers/watchdog/aspeed_wdt.c | 34 ++++++++++++++++++++++++++++++----
1 file changed, 30 insertions(+), 4 deletions(-)
diff --git a/drivers/watchdog/aspeed_wdt.c b/drivers/watchdog/aspeed_wdt.c
index b4773a6aaf8c..c3c8098c035d 100644
--- a/drivers/watchdog/aspeed_wdt.c
+++ b/drivers/watchdog/aspeed_wdt.c
@@ -11,10 +11,12 @@
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/kstrtox.h>
+#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/platform_device.h>
+#include <linux/regmap.h>
#include <linux/watchdog.h>
static bool nowayout = WATCHDOG_NOWAYOUT;
@@ -82,6 +84,13 @@ MODULE_DEVICE_TABLE(of, aspeed_wdt_of_table);
#define WDT_RESET_MASK1 0x1c
#define WDT_RESET_MASK2 0x20
+/*
+ * Ast2600 SCU74 bit1 is External reset flag
+ * Ast2500 SCU3C bit1 is External reset flag
+ */
+#define AST2500_SYSTEM_RESET_EVENT 0x3C
+#define AST2600_SYSTEM_RESET_EVENT 0x74
+#define EXTERN_RESET_FLAG BIT(1)
/*
* WDT_RESET_WIDTH controls the characteristics of the external pulse (if
* enabled), specifically:
@@ -330,6 +339,11 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
if (IS_ERR(wdt->base))
return PTR_ERR(wdt->base);
+ struct regmap *scu_base = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "aspeed,scu");
+ if (IS_ERR(scu_base))
+ return PTR_ERR(scu_base);
+
wdt->wdd.info = &aspeed_wdt_info;
if (wdt->cfg->irq_mask) {
@@ -459,14 +473,26 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
}
status = readl(wdt->base + WDT_TIMEOUT_STATUS);
- if (status & WDT_TIMEOUT_STATUS_BOOT_SECONDARY) {
+ if (status & WDT_TIMEOUT_STATUS_EVENT)
wdt->wdd.bootstatus = WDIOF_CARDRESET;
- if (of_device_is_compatible(np, "aspeed,ast2400-wdt") ||
- of_device_is_compatible(np, "aspeed,ast2500-wdt"))
- wdt->wdd.groups = bswitch_groups;
+ if (of_device_is_compatible(np, "aspeed,ast2600-wdt")) {
+ ret = regmap_read(scu_base,
+ AST2600_SYSTEM_RESET_EVENT,
+ &status);
+ } else {
+ ret = regmap_read(scu_base,
+ AST2500_SYSTEM_RESET_EVENT,
+ &status);
+ wdt->wdd.groups = bswitch_groups;
}
+ /*
+ * Reset cause by Extern Reset
+ */
+ if (status & EXTERN_RESET_FLAG && !ret)
+ wdt->wdd.bootstatus |= WDIOF_EXTERN1;
+
dev_set_drvdata(dev, wdt);
return devm_watchdog_register_device(dev, &wdt->wdd);
--
2.25.1
To use the SCU register to obtain reset flags for supporting
bootstatus.
Signed-off-by: Peter Yin <[email protected]>
---
Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt b/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
index 3208adb3e52e..80a1f58b5a2e 100644
--- a/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
@@ -8,6 +8,8 @@ Required properties:
- reg: physical base address of the controller and length of memory mapped
region
+ - aspeed,scu: a reference to the System Control Unit node of the Aspeed
+ SOC.
Optional properties:
@@ -62,6 +64,7 @@ Examples:
reg = <0x1e785000 0x1c>;
aspeed,reset-type = "system";
aspeed,external-signal;
+ aspeed,scu = <&syscon>;
};
#include <dt-bindings/watchdog/aspeed-wdt.h>
@@ -70,4 +73,5 @@ Examples:
reg = <0x1e785040 0x40>;
aspeed,reset-mask = <AST2600_WDT_RESET1_DEFAULT
(AST2600_WDT_RESET2_DEFAULT & ~AST2600_WDT_RESET2_LPC)>;
+ aspeed,scu = <&syscon>;
};
--
2.25.1
Peter Yin 於 3/28/24 09:33 寫道:
> Add WDIOF_EXTERN1 and WDIOF_CARDRESET bootstatus in ast2600
>
> Regarding the AST2600 specification, the WDTn Timeout Status Register
> (WDT10) has bit 1 reserved. Bit 1 of the status register indicates
> on ast2500 if the boot was from the second boot source.
> It does not indicate that the most recent reset was triggered by
> the watchdog. The code should just be changed to set WDIOF_CARDRESET
> if bit 0 of the status register is set.
>
> Include SCU register to veriy WDIOF_EXTERN1 in ast2600 SCU74 or
> ast2500 SCU3C when bit1 is set.
>
> Signed-off-by: Peter Yin <[email protected]>
> ---
> drivers/watchdog/aspeed_wdt.c | 34 ++++++++++++++++++++++++++++++----
> 1 file changed, 30 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/watchdog/aspeed_wdt.c b/drivers/watchdog/aspeed_wdt.c
> index b4773a6aaf8c..c3c8098c035d 100644
> --- a/drivers/watchdog/aspeed_wdt.c
> +++ b/drivers/watchdog/aspeed_wdt.c
> @@ -11,10 +11,12 @@
> #include <linux/io.h>
> #include <linux/kernel.h>
> #include <linux/kstrtox.h>
> +#include <linux/mfd/syscon.h>
> #include <linux/module.h>
> #include <linux/of.h>
> #include <linux/of_irq.h>
> #include <linux/platform_device.h>
> +#include <linux/regmap.h>
> #include <linux/watchdog.h>
>
> static bool nowayout = WATCHDOG_NOWAYOUT;
> @@ -82,6 +84,13 @@ MODULE_DEVICE_TABLE(of, aspeed_wdt_of_table);
> #define WDT_RESET_MASK1 0x1c
> #define WDT_RESET_MASK2 0x20
>
> +/*
> + * Ast2600 SCU74 bit1 is External reset flag
> + * Ast2500 SCU3C bit1 is External reset flag
> + */
> +#define AST2500_SYSTEM_RESET_EVENT 0x3C
> +#define AST2600_SYSTEM_RESET_EVENT 0x74
> +#define EXTERN_RESET_FLAG BIT(1)
> /*
> * WDT_RESET_WIDTH controls the characteristics of the external pulse (if
> * enabled), specifically:
> @@ -330,6 +339,11 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
> if (IS_ERR(wdt->base))
> return PTR_ERR(wdt->base);
>
> + struct regmap *scu_base = syscon_regmap_lookup_by_phandle(dev->of_node,
> + "aspeed,scu");
> + if (IS_ERR(scu_base))
> + return PTR_ERR(scu_base);
> +
> wdt->wdd.info = &aspeed_wdt_info;
>
> if (wdt->cfg->irq_mask) {
> @@ -459,14 +473,26 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
> }
>
> status = readl(wdt->base + WDT_TIMEOUT_STATUS);
> - if (status & WDT_TIMEOUT_STATUS_BOOT_SECONDARY) {
> + if (status & WDT_TIMEOUT_STATUS_EVENT)
> wdt->wdd.bootstatus = WDIOF_CARDRESET;
>
> - if (of_device_is_compatible(np, "aspeed,ast2400-wdt") ||
> - of_device_is_compatible(np, "aspeed,ast2500-wdt"))
> - wdt->wdd.groups = bswitch_groups;
> + if (of_device_is_compatible(np, "aspeed,ast2600-wdt")) {
> + ret = regmap_read(scu_base,
> + AST2600_SYSTEM_RESET_EVENT,
> + &status);
> + } else {
> + ret = regmap_read(scu_base,
> + AST2500_SYSTEM_RESET_EVENT,
> + &status);
> + wdt->wdd.groups = bswitch_groups;
> }
>
> + /*
> + * Reset cause by Extern Reset
> + */
> + if (status & EXTERN_RESET_FLAG && !ret)
> + wdt->wdd.bootstatus |= WDIOF_EXTERN1;
> +
> dev_set_drvdata(dev, wdt);
>
> return devm_watchdog_register_device(dev, &wdt->wdd);
Please ignore this version, as I lost the definition for
WDT_TIMEOUT_STATUS_EVENT.
Thanks.