This patchset final purpose is add PCIe driver for StarFive JH7110 SoC.
JH7110 using PLDA XpressRICH PCIe IP. Microchip PolarFire Using the
same IP and have commit their codes, which are mixed with PLDA
controller codes and Microchip platform codes.
For re-use the PLDA controller codes, I request refactoring microchip
codes, move PLDA common codes to PLDA files.
Desigware and Cadence is good example for refactoring codes.
----------------------------------------------------------
The refactoring patches total number is 16,(patch 1-16)
which do NOT contain changing logic of codes.
These patches just contain three type basic operations.
(rename, modify codes to support starfive platform, and moving to common file)
If these patched are all be reviewed. They can be accepted first.
Refactoring patches can be devided to different groups
1. (patch 1- 3 is the prepare work of refactoring)
patch1 is move PLDA XpressRICH PCIe host common properties dt-binding
docs from microchip,pcie-host.yaml
patch2 is move PolarFire codes to PLDA directory.
patch3 is move PLDA IP register macros to plda-pcie.h
2. (patch4 - 6 is processing and re-use PCIe host instance)
patch4 is add bridge_addr field to PCIe host instance.
patch5 is rename data structure in microchip codes.
patch6 is moving two data structures to head file
3. (patch 7 - 9 are for re-use two PCIe setup function)
patch7 is rename two setup functions in microchip codes, prepare to move
to common file.
patch8 is change the arguments of plda_pcie_setup_iomems()
patch9 is move the two setup functions to common file pcie-plda-host.c
4.(patch 10 - 16 are for re-use interupt processing codes)
patch10 is rename the IRQ related functions, prepare to move to
pcie-plda-host.c
patch 11 - 15 is modify the interrupt event codes, preparing for support starfive
and microchip two platforms.
patch16 is move IRQ related functions to pcie-plda-host.c
------------------------------------------------------------
The remainder patches (patch 17 -22) are not refactoring patch.
They are for adding StarFive codes and dont modify the microchip's
codes.
patch17 is Add event bitmap for mask unused/unimpementes interrupts
patch18 is Add host init/deinit functions.
patch19 is add StarFive JH7110 PCIe dt-binding doc.
patch20 is Add a PCIe delay time macro
patch21 is add StarFive JH7110 Soc PCIe driver code.
qurik).
patch22 is Starfive dts config
This patchset is base on v6.9-rc1
previous version:
v10:https://patchwork.kernel.org/project/linux-pci/cover/[email protected]/
v11:https://patchwork.kernel.org/project/linux-pci/cover/[email protected]/
v12:https://patchwork.kernel.org/project/linux-pci/cover/[email protected]/
v13:https://patchwork.kernel.org/project/linux-pci/cover/[email protected]/
v14:https://patchwork.kernel.org/project/linux-pci/cover/[email protected]/
v15:https://patchwork.kernel.org/project/linux-pci/cover/[email protected]/
change:
v16:
modify the patch 3 - 9 commit message. (follow Lorrenzo's review comments)
Update the MAINTAINER in correct patch.
Add more comments in Starfive pcie driver to explain the pcie setting.(patch 21)
Remove v15 patch 22. We will get the delay time errdata or find a correct fix method.
v15:
resend: rebase on v6.8-rc6
Add new patch 22.(A workaround to JH7110 PCIe quirk).
v14:
resend: correct some commit messages. base on v6.8-rc1
Add a new patch 17. Add interrupt eventmap to mask non-implemented or unused interrupt.
patch3: rename the PLDA interrupts macro name.
patch9: remove the redundant head file.
patch10,11: modify the commit message suggested by Lorrenzo.
patch12: modify the commit message.
patch14, 15: PLDA codes will handle DMA interrupts. Modify the commit message.
patch18 remove plda default events. This is implemented by vendor.
patch21 Add plda_event instance stf_pcie_event.
v13:
patch14: 1. Add plda_get_event() function. This can be compare with mc_get_event() easily and
track the codes changes in case in the future..
2. The host event_ops is directly set to plda host port.
3. Setting default host event_ops instead of checking event ops.
patch15:1. Add PLDA event irq_chip instead of event_domain_ops, The
event_domain_ops can be re-used.
2. The host event irq_chip is directly set to plda host port.
3. Add PLDA event irqchip ops codes.
4. Remove Conor's review tag due to whole patch have been changed.
patch16: Also move the new added PLDA event codes.
patch18: Add plda host init and deinit function only.
v12:
patch18: modify the commit message and add starfive review tag.
Add PCIE_RESET_CONFIG_DEVICE_WAIT_MS to patch 19.
patch21: Add disable runtime pm function in starfive_pcie_remove()
Add "depens on ARCH_STARFIVE || COMPILE_TEST" in Starfive PCie Kconfig
v11:
check and modify some commit messages again.
All the codes are the same with v10.
v10:
All the commit message set to fit in 75 columns.
All the codes fit in less than 80 colunms.
patch 14:
Commit message changes suggested by Conor.
patch 21:
Add 100 ms delay macro to pci.h
generic phy pointer related codes moving to pcie-starfive.c
This patch Change pcie-starfive only, bus_ops move to patch 16.
Some Codes changes suggested by Bjorn.
Kevin Xie (1):
PCI: Add PCIE_RESET_CONFIG_DEVICE_WAIT_MS waiting time value
Minda Chen (21):
dt-bindings: PCI: Add PLDA XpressRICH PCIe host common properties
PCI: microchip: Move pcie-microchip-host.c to plda directory
PCI: microchip: Move PLDA IP register macros to pcie-plda.h
PCI: microchip: Add bridge_addr field to struct mc_pcie
PCI: microchip: Rename two PCIe data structures
PCI: microchip: Move PCIe host data structures to plda-pcie.h
PCI: microchip: Rename two setup functions
PCI: microchip: Change the argument of plda_pcie_setup_iomems()
PCI: microchip: Move setup functions to pcie-plda-host.c
PCI: microchip: Rename interrupt related functions
PCI: microchip: Add num_events field to struct plda_pcie_rp
PCI: microchip: Add request_event_irq() callback function
PCI: microchip: Add INTx and MSI event num to struct plda_event
PCI: microchip: Add get_events() callback and add PLDA get_event()
PCI: microchip: Add event irqchip field to host port and add PLDA
irqchip
PCI: microchip: Move IRQ functions to pcie-plda-host.c
PCI: plda: Add event bitmap field to struct plda_pcie_rp
PCI: plda: Add host init/deinit and map bus functions
dt-bindings: PCI: Add StarFive JH7110 PCIe controller
PCI: starfive: Add JH7110 PCIe controller
riscv: dts: starfive: add PCIe dts configuration for JH7110
.../bindings/pci/microchip,pcie-host.yaml | 55 +-
.../pci/plda,xpressrich3-axi-common.yaml | 75 ++
.../bindings/pci/starfive,jh7110-pcie.yaml | 120 ++++
MAINTAINERS | 19 +-
.../jh7110-starfive-visionfive-2.dtsi | 64 ++
arch/riscv/boot/dts/starfive/jh7110.dtsi | 86 +++
drivers/pci/controller/Kconfig | 9 +-
drivers/pci/controller/Makefile | 2 +-
drivers/pci/controller/plda/Kconfig | 30 +
drivers/pci/controller/plda/Makefile | 4 +
.../{ => plda}/pcie-microchip-host.c | 615 ++---------------
drivers/pci/controller/plda/pcie-plda-host.c | 651 ++++++++++++++++++
drivers/pci/controller/plda/pcie-plda.h | 273 ++++++++
drivers/pci/controller/plda/pcie-starfive.c | 488 +++++++++++++
drivers/pci/pci.h | 16 +
15 files changed, 1891 insertions(+), 616 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml
create mode 100644 Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
create mode 100644 drivers/pci/controller/plda/Kconfig
create mode 100644 drivers/pci/controller/plda/Makefile
rename drivers/pci/controller/{ => plda}/pcie-microchip-host.c (54%)
create mode 100644 drivers/pci/controller/plda/pcie-plda-host.c
create mode 100644 drivers/pci/controller/plda/pcie-plda.h
create mode 100644 drivers/pci/controller/plda/pcie-starfive.c
base-commit: 4cece764965020c22cff7665b18a012006359095
--
2.17.1
Move setup functions to common pcie-plda-host.c. So these two functions
can be re-used.
Signed-off-by: Minda Chen <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
---
MAINTAINERS | 1 +
drivers/pci/controller/plda/Kconfig | 4 +
drivers/pci/controller/plda/Makefile | 1 +
.../pci/controller/plda/pcie-microchip-host.c | 59 ---------------
drivers/pci/controller/plda/pcie-plda-host.c | 73 +++++++++++++++++++
drivers/pci/controller/plda/pcie-plda.h | 5 ++
6 files changed, 84 insertions(+), 59 deletions(-)
create mode 100644 drivers/pci/controller/plda/pcie-plda-host.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 1fa4d61291f9..d85d9db38efa 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16951,6 +16951,7 @@ M: Daire McNamara <[email protected]>
L: [email protected]
S: Maintained
F: Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml
+F: drivers/pci/controller/plda/pcie-plda-host.c
F: drivers/pci/controller/plda/pcie-plda.h
PCI DRIVER FOR RENESAS R-CAR
diff --git a/drivers/pci/controller/plda/Kconfig b/drivers/pci/controller/plda/Kconfig
index 5cb3be4fc98c..e54a82ee94f5 100644
--- a/drivers/pci/controller/plda/Kconfig
+++ b/drivers/pci/controller/plda/Kconfig
@@ -3,10 +3,14 @@
menu "PLDA-based PCIe controllers"
depends on PCI
+config PCIE_PLDA_HOST
+ bool
+
config PCIE_MICROCHIP_HOST
tristate "Microchip AXI PCIe controller"
depends on PCI_MSI && OF
select PCI_HOST_COMMON
+ select PCIE_PLDA_HOST
help
Say Y here if you want kernel to support the Microchip AXI PCIe
Host Bridge driver.
diff --git a/drivers/pci/controller/plda/Makefile b/drivers/pci/controller/plda/Makefile
index e1a265cbf91c..4340ab007f44 100644
--- a/drivers/pci/controller/plda/Makefile
+++ b/drivers/pci/controller/plda/Makefile
@@ -1,2 +1,3 @@
# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_PCIE_PLDA_HOST) += pcie-plda-host.o
obj-$(CONFIG_PCIE_MICROCHIP_HOST) += pcie-microchip-host.o
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index 805870aed61d..573ad31c578a 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -838,65 +838,6 @@ static int mc_pcie_init_irq_domains(struct plda_pcie_rp *port)
return mc_allocate_msi_domains(port);
}
-static void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
- phys_addr_t axi_addr, phys_addr_t pci_addr,
- size_t size)
-{
- u32 atr_sz = ilog2(size) - 1;
- u32 val;
-
- if (index == 0)
- val = PCIE_CONFIG_INTERFACE;
- else
- val = PCIE_TX_RX_INTERFACE;
-
- writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
- ATR0_AXI4_SLV0_TRSL_PARAM);
-
- val = lower_32_bits(axi_addr) | (atr_sz << ATR_SIZE_SHIFT) |
- ATR_IMPL_ENABLE;
- writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
- ATR0_AXI4_SLV0_SRCADDR_PARAM);
-
- val = upper_32_bits(axi_addr);
- writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
- ATR0_AXI4_SLV0_SRC_ADDR);
-
- val = lower_32_bits(pci_addr);
- writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
- ATR0_AXI4_SLV0_TRSL_ADDR_LSB);
-
- val = upper_32_bits(pci_addr);
- writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
- ATR0_AXI4_SLV0_TRSL_ADDR_UDW);
-
- val = readl(bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
- val |= (ATR0_PCIE_ATR_SIZE << ATR0_PCIE_ATR_SIZE_SHIFT);
- writel(val, bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
- writel(0, bridge_base_addr + ATR0_PCIE_WIN0_SRC_ADDR);
-}
-
-static int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
- struct plda_pcie_rp *port)
-{
- void __iomem *bridge_base_addr = port->bridge_addr;
- struct resource_entry *entry;
- u64 pci_addr;
- u32 index = 1;
-
- resource_list_for_each_entry(entry, &bridge->windows) {
- if (resource_type(entry->res) == IORESOURCE_MEM) {
- pci_addr = entry->res->start - entry->offset;
- plda_pcie_setup_window(bridge_base_addr, index,
- entry->res->start, pci_addr,
- resource_size(entry->res));
- index++;
- }
- }
-
- return 0;
-}
-
static inline void mc_clear_secs(struct mc_pcie *port)
{
void __iomem *ctrl_base_addr = port->axi_base_addr + MC_PCIE_CTRL_ADDR;
diff --git a/drivers/pci/controller/plda/pcie-plda-host.c b/drivers/pci/controller/plda/pcie-plda-host.c
new file mode 100644
index 000000000000..05ea68baebfb
--- /dev/null
+++ b/drivers/pci/controller/plda/pcie-plda-host.c
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PLDA PCIe XpressRich host controller driver
+ *
+ * Copyright (C) 2023 Microchip Co. Ltd
+ *
+ * Author: Daire McNamara <[email protected]>
+ */
+
+#include <linux/pci-ecam.h>
+
+#include "pcie-plda.h"
+
+void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
+ phys_addr_t axi_addr, phys_addr_t pci_addr,
+ size_t size)
+{
+ u32 atr_sz = ilog2(size) - 1;
+ u32 val;
+
+ if (index == 0)
+ val = PCIE_CONFIG_INTERFACE;
+ else
+ val = PCIE_TX_RX_INTERFACE;
+
+ writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
+ ATR0_AXI4_SLV0_TRSL_PARAM);
+
+ val = lower_32_bits(axi_addr) | (atr_sz << ATR_SIZE_SHIFT) |
+ ATR_IMPL_ENABLE;
+ writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
+ ATR0_AXI4_SLV0_SRCADDR_PARAM);
+
+ val = upper_32_bits(axi_addr);
+ writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
+ ATR0_AXI4_SLV0_SRC_ADDR);
+
+ val = lower_32_bits(pci_addr);
+ writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
+ ATR0_AXI4_SLV0_TRSL_ADDR_LSB);
+
+ val = upper_32_bits(pci_addr);
+ writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
+ ATR0_AXI4_SLV0_TRSL_ADDR_UDW);
+
+ val = readl(bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
+ val |= (ATR0_PCIE_ATR_SIZE << ATR0_PCIE_ATR_SIZE_SHIFT);
+ writel(val, bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
+ writel(0, bridge_base_addr + ATR0_PCIE_WIN0_SRC_ADDR);
+}
+EXPORT_SYMBOL_GPL(plda_pcie_setup_window);
+
+int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
+ struct plda_pcie_rp *port)
+{
+ void __iomem *bridge_base_addr = port->bridge_addr;
+ struct resource_entry *entry;
+ u64 pci_addr;
+ u32 index = 1;
+
+ resource_list_for_each_entry(entry, &bridge->windows) {
+ if (resource_type(entry->res) == IORESOURCE_MEM) {
+ pci_addr = entry->res->start - entry->offset;
+ plda_pcie_setup_window(bridge_base_addr, index,
+ entry->res->start, pci_addr,
+ resource_size(entry->res));
+ index++;
+ }
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(plda_pcie_setup_iomems);
diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
index 9ca66916c609..e277a5452b5d 100644
--- a/drivers/pci/controller/plda/pcie-plda.h
+++ b/drivers/pci/controller/plda/pcie-plda.h
@@ -126,4 +126,9 @@ struct plda_pcie_rp {
void __iomem *bridge_addr;
};
+void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
+ phys_addr_t axi_addr, phys_addr_t pci_addr,
+ size_t size);
+int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
+ struct plda_pcie_rp *port);
#endif
--
2.17.1
Add PLDA XpressRICH PCIe host common properties dt-binding doc.
PolarFire PCIe host using PLDA IP. Move common properties from Microchip
PolarFire PCIe host to PLDA files.
Signed-off-by: Minda Chen <[email protected]>
Reviewed-by: Hal Feng <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Tested-by: John Clark <[email protected]>
---
.../bindings/pci/microchip,pcie-host.yaml | 55 +-------------
.../pci/plda,xpressrich3-axi-common.yaml | 75 +++++++++++++++++++
MAINTAINERS | 6 ++
3 files changed, 82 insertions(+), 54 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml
diff --git a/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml
index f7a3c2636355..7c2d51221f65 100644
--- a/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml
+++ b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml
@@ -10,21 +10,13 @@ maintainers:
- Daire McNamara <[email protected]>
allOf:
- - $ref: /schemas/pci/pci-bus.yaml#
+ - $ref: plda,xpressrich3-axi-common.yaml#
- $ref: /schemas/interrupt-controller/msi-controller.yaml#
properties:
compatible:
const: microchip,pcie-host-1.0 # PolarFire
- reg:
- maxItems: 2
-
- reg-names:
- items:
- - const: cfg
- - const: apb
-
clocks:
description:
Fabric Interface Controllers, FICs, are the interface between the FPGA
@@ -52,18 +44,6 @@ properties:
items:
pattern: '^fic[0-3]$'
- interrupts:
- minItems: 1
- items:
- - description: PCIe host controller
- - description: builtin MSI controller
-
- interrupt-names:
- minItems: 1
- items:
- - const: pcie
- - const: msi
-
ranges:
maxItems: 1
@@ -71,39 +51,6 @@ properties:
minItems: 1
maxItems: 6
- msi-controller:
- description: Identifies the node as an MSI controller.
-
- msi-parent:
- description: MSI controller the device is capable of using.
-
- interrupt-controller:
- type: object
- properties:
- '#address-cells':
- const: 0
-
- '#interrupt-cells':
- const: 1
-
- interrupt-controller: true
-
- required:
- - '#address-cells'
- - '#interrupt-cells'
- - interrupt-controller
-
- additionalProperties: false
-
-required:
- - reg
- - reg-names
- - "#interrupt-cells"
- - interrupts
- - interrupt-map-mask
- - interrupt-map
- - msi-controller
-
unevaluatedProperties: false
examples:
diff --git a/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml b/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml
new file mode 100644
index 000000000000..31bb17b11e58
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/plda,xpressrich3-axi-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PLDA XpressRICH PCIe host common properties
+
+maintainers:
+ - Daire McNamara <[email protected]>
+ - Kevin Xie <[email protected]>
+
+description:
+ Generic PLDA XpressRICH PCIe host common properties.
+
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+ reg:
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: cfg
+ - const: apb
+
+ interrupts:
+ minItems: 1
+ items:
+ - description: PCIe host controller
+ - description: builtin MSI controller
+
+ interrupt-names:
+ minItems: 1
+ items:
+ - const: pcie
+ - const: msi
+
+ msi-controller:
+ description: Identifies the node as an MSI controller.
+
+ msi-parent:
+ description: MSI controller the device is capable of using.
+
+ interrupt-controller:
+ type: object
+ properties:
+ '#address-cells':
+ const: 0
+
+ '#interrupt-cells':
+ const: 1
+
+ interrupt-controller: true
+
+ required:
+ - '#address-cells'
+ - '#interrupt-cells'
+ - interrupt-controller
+
+ additionalProperties: false
+
+required:
+ - reg
+ - reg-names
+ - interrupts
+ - msi-controller
+ - "#interrupt-cells"
+ - interrupt-map-mask
+ - interrupt-map
+
+additionalProperties: true
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index aa3b947fb080..06278f1db13f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16946,6 +16946,12 @@ S: Maintained
F: Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt
F: drivers/pci/controller/mobiveil/pcie-layerscape-gen4.c
+PCI DRIVER FOR PLDA PCIE IP
+M: Daire McNamara <[email protected]>
+L: [email protected]
+S: Maintained
+F: Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml
+
PCI DRIVER FOR RENESAS R-CAR
M: Marek Vasut <[email protected]>
M: Yoshihiro Shimoda <[email protected]>
--
2.17.1
If other vendor do not select PCI_HOST_COMMON, the driver data is not
struct pci_host_bridge.
Move calling platform_get_drvdata() to mc_platform_init().
Signed-off-by: Minda Chen <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
---
drivers/pci/controller/plda/pcie-microchip-host.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index 9b367927cd32..805870aed61d 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -876,11 +876,10 @@ static void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
writel(0, bridge_base_addr + ATR0_PCIE_WIN0_SRC_ADDR);
}
-static int plda_pcie_setup_iomems(struct platform_device *pdev,
+static int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
struct plda_pcie_rp *port)
{
void __iomem *bridge_base_addr = port->bridge_addr;
- struct pci_host_bridge *bridge = platform_get_drvdata(pdev);
struct resource_entry *entry;
u64 pci_addr;
u32 index = 1;
@@ -1018,6 +1017,7 @@ static int mc_platform_init(struct pci_config_window *cfg)
{
struct device *dev = cfg->parent;
struct platform_device *pdev = to_platform_device(dev);
+ struct pci_host_bridge *bridge = platform_get_drvdata(pdev);
void __iomem *bridge_base_addr =
port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
int ret;
@@ -1031,7 +1031,7 @@ static int mc_platform_init(struct pci_config_window *cfg)
mc_pcie_enable_msi(port, cfg->win);
/* Configure non-config space outbound ranges */
- ret = plda_pcie_setup_iomems(pdev, &port->plda);
+ ret = plda_pcie_setup_iomems(bridge, &port->plda);
if (ret)
return ret;
--
2.17.1
Move PLDA PCIe host controller IP registers macros to pcie-plda.h,
including bridge registers and PLDA IRQ event number.
Signed-off-by: Minda Chen <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
---
MAINTAINERS | 1 +
.../pci/controller/plda/pcie-microchip-host.c | 108 +++---------------
drivers/pci/controller/plda/pcie-plda.h | 108 ++++++++++++++++++
3 files changed, 125 insertions(+), 92 deletions(-)
create mode 100644 drivers/pci/controller/plda/pcie-plda.h
diff --git a/MAINTAINERS b/MAINTAINERS
index dd158cc7b009..1fa4d61291f9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16951,6 +16951,7 @@ M: Daire McNamara <[email protected]>
L: [email protected]
S: Maintained
F: Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml
+F: drivers/pci/controller/plda/pcie-plda.h
PCI DRIVER FOR RENESAS R-CAR
M: Marek Vasut <[email protected]>
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index cb09a8137e25..d9030d550482 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -19,6 +19,7 @@
#include <linux/platform_device.h>
#include "../../pci.h"
+#include "pcie-plda.h"
/* Number of MSI IRQs */
#define MC_MAX_NUM_MSI_IRQS 32
@@ -30,84 +31,6 @@
#define MC_PCIE_BRIDGE_ADDR (MC_PCIE1_BRIDGE_ADDR)
#define MC_PCIE_CTRL_ADDR (MC_PCIE1_CTRL_ADDR)
-/* PCIe Bridge Phy Regs */
-#define PCIE_PCI_IRQ_DW0 0xa8
-#define MSIX_CAP_MASK BIT(31)
-#define NUM_MSI_MSGS_MASK GENMASK(6, 4)
-#define NUM_MSI_MSGS_SHIFT 4
-
-#define IMASK_LOCAL 0x180
-#define DMA_END_ENGINE_0_MASK 0x00000000u
-#define DMA_END_ENGINE_0_SHIFT 0
-#define DMA_END_ENGINE_1_MASK 0x00000000u
-#define DMA_END_ENGINE_1_SHIFT 1
-#define DMA_ERROR_ENGINE_0_MASK 0x00000100u
-#define DMA_ERROR_ENGINE_0_SHIFT 8
-#define DMA_ERROR_ENGINE_1_MASK 0x00000200u
-#define DMA_ERROR_ENGINE_1_SHIFT 9
-#define A_ATR_EVT_POST_ERR_MASK 0x00010000u
-#define A_ATR_EVT_POST_ERR_SHIFT 16
-#define A_ATR_EVT_FETCH_ERR_MASK 0x00020000u
-#define A_ATR_EVT_FETCH_ERR_SHIFT 17
-#define A_ATR_EVT_DISCARD_ERR_MASK 0x00040000u
-#define A_ATR_EVT_DISCARD_ERR_SHIFT 18
-#define A_ATR_EVT_DOORBELL_MASK 0x00000000u
-#define A_ATR_EVT_DOORBELL_SHIFT 19
-#define P_ATR_EVT_POST_ERR_MASK 0x00100000u
-#define P_ATR_EVT_POST_ERR_SHIFT 20
-#define P_ATR_EVT_FETCH_ERR_MASK 0x00200000u
-#define P_ATR_EVT_FETCH_ERR_SHIFT 21
-#define P_ATR_EVT_DISCARD_ERR_MASK 0x00400000u
-#define P_ATR_EVT_DISCARD_ERR_SHIFT 22
-#define P_ATR_EVT_DOORBELL_MASK 0x00000000u
-#define P_ATR_EVT_DOORBELL_SHIFT 23
-#define PM_MSI_INT_INTA_MASK 0x01000000u
-#define PM_MSI_INT_INTA_SHIFT 24
-#define PM_MSI_INT_INTB_MASK 0x02000000u
-#define PM_MSI_INT_INTB_SHIFT 25
-#define PM_MSI_INT_INTC_MASK 0x04000000u
-#define PM_MSI_INT_INTC_SHIFT 26
-#define PM_MSI_INT_INTD_MASK 0x08000000u
-#define PM_MSI_INT_INTD_SHIFT 27
-#define PM_MSI_INT_INTX_MASK 0x0f000000u
-#define PM_MSI_INT_INTX_SHIFT 24
-#define PM_MSI_INT_MSI_MASK 0x10000000u
-#define PM_MSI_INT_MSI_SHIFT 28
-#define PM_MSI_INT_AER_EVT_MASK 0x20000000u
-#define PM_MSI_INT_AER_EVT_SHIFT 29
-#define PM_MSI_INT_EVENTS_MASK 0x40000000u
-#define PM_MSI_INT_EVENTS_SHIFT 30
-#define PM_MSI_INT_SYS_ERR_MASK 0x80000000u
-#define PM_MSI_INT_SYS_ERR_SHIFT 31
-#define NUM_LOCAL_EVENTS 15
-#define ISTATUS_LOCAL 0x184
-#define IMASK_HOST 0x188
-#define ISTATUS_HOST 0x18c
-#define IMSI_ADDR 0x190
-#define ISTATUS_MSI 0x194
-
-/* PCIe Master table init defines */
-#define ATR0_PCIE_WIN0_SRCADDR_PARAM 0x600u
-#define ATR0_PCIE_ATR_SIZE 0x25
-#define ATR0_PCIE_ATR_SIZE_SHIFT 1
-#define ATR0_PCIE_WIN0_SRC_ADDR 0x604u
-#define ATR0_PCIE_WIN0_TRSL_ADDR_LSB 0x608u
-#define ATR0_PCIE_WIN0_TRSL_ADDR_UDW 0x60cu
-#define ATR0_PCIE_WIN0_TRSL_PARAM 0x610u
-
-/* PCIe AXI slave table init defines */
-#define ATR0_AXI4_SLV0_SRCADDR_PARAM 0x800u
-#define ATR_SIZE_SHIFT 1
-#define ATR_IMPL_ENABLE 1
-#define ATR0_AXI4_SLV0_SRC_ADDR 0x804u
-#define ATR0_AXI4_SLV0_TRSL_ADDR_LSB 0x808u
-#define ATR0_AXI4_SLV0_TRSL_ADDR_UDW 0x80cu
-#define ATR0_AXI4_SLV0_TRSL_PARAM 0x810u
-#define PCIE_TX_RX_INTERFACE 0x00000000u
-#define PCIE_CONFIG_INTERFACE 0x00000001u
-
-#define ATR_ENTRY_SIZE 32
-
/* PCIe Controller Phy Regs */
#define SEC_ERROR_EVENT_CNT 0x20
#define DED_ERROR_EVENT_CNT 0x24
@@ -179,20 +102,21 @@
#define EVENT_LOCAL_DMA_END_ENGINE_1 12
#define EVENT_LOCAL_DMA_ERROR_ENGINE_0 13
#define EVENT_LOCAL_DMA_ERROR_ENGINE_1 14
-#define EVENT_LOCAL_A_ATR_EVT_POST_ERR 15
-#define EVENT_LOCAL_A_ATR_EVT_FETCH_ERR 16
-#define EVENT_LOCAL_A_ATR_EVT_DISCARD_ERR 17
-#define EVENT_LOCAL_A_ATR_EVT_DOORBELL 18
-#define EVENT_LOCAL_P_ATR_EVT_POST_ERR 19
-#define EVENT_LOCAL_P_ATR_EVT_FETCH_ERR 20
-#define EVENT_LOCAL_P_ATR_EVT_DISCARD_ERR 21
-#define EVENT_LOCAL_P_ATR_EVT_DOORBELL 22
-#define EVENT_LOCAL_PM_MSI_INT_INTX 23
-#define EVENT_LOCAL_PM_MSI_INT_MSI 24
-#define EVENT_LOCAL_PM_MSI_INT_AER_EVT 25
-#define EVENT_LOCAL_PM_MSI_INT_EVENTS 26
-#define EVENT_LOCAL_PM_MSI_INT_SYS_ERR 27
-#define NUM_EVENTS 28
+#define NUM_MC_EVENTS 15
+#define EVENT_LOCAL_A_ATR_EVT_POST_ERR (NUM_MC_EVENTS + PLDA_AXI_POST_ERR)
+#define EVENT_LOCAL_A_ATR_EVT_FETCH_ERR (NUM_MC_EVENTS + PLDA_AXI_FETCH_ERR)
+#define EVENT_LOCAL_A_ATR_EVT_DISCARD_ERR (NUM_MC_EVENTS + PLDA_AXI_DISCARD_ERR)
+#define EVENT_LOCAL_A_ATR_EVT_DOORBELL (NUM_MC_EVENTS + PLDA_AXI_DOORBELL)
+#define EVENT_LOCAL_P_ATR_EVT_POST_ERR (NUM_MC_EVENTS + PLDA_PCIE_POST_ERR)
+#define EVENT_LOCAL_P_ATR_EVT_FETCH_ERR (NUM_MC_EVENTS + PLDA_PCIE_FETCH_ERR)
+#define EVENT_LOCAL_P_ATR_EVT_DISCARD_ERR (NUM_MC_EVENTS + PLDA_PCIE_DISCARD_ERR)
+#define EVENT_LOCAL_P_ATR_EVT_DOORBELL (NUM_MC_EVENTS + PLDA_PCIE_DOORBELL)
+#define EVENT_LOCAL_PM_MSI_INT_INTX (NUM_MC_EVENTS + PLDA_INTX)
+#define EVENT_LOCAL_PM_MSI_INT_MSI (NUM_MC_EVENTS + PLDA_MSI)
+#define EVENT_LOCAL_PM_MSI_INT_AER_EVT (NUM_MC_EVENTS + PLDA_AER_EVENT)
+#define EVENT_LOCAL_PM_MSI_INT_EVENTS (NUM_MC_EVENTS + PLDA_MISC_EVENTS)
+#define EVENT_LOCAL_PM_MSI_INT_SYS_ERR (NUM_MC_EVENTS + PLDA_SYS_ERR)
+#define NUM_EVENTS (NUM_MC_EVENTS + PLDA_INT_EVENT_NUM)
#define PCIE_EVENT_CAUSE(x, s) \
[EVENT_PCIE_ ## x] = { __stringify(x), s }
diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
new file mode 100644
index 000000000000..65e0f3b72184
--- /dev/null
+++ b/drivers/pci/controller/plda/pcie-plda.h
@@ -0,0 +1,108 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * PLDA PCIe host controller driver
+ */
+
+#ifndef _PCIE_PLDA_H
+#define _PCIE_PLDA_H
+
+/* PCIe Bridge Phy Regs */
+#define PCIE_PCI_IRQ_DW0 0xa8
+#define MSIX_CAP_MASK BIT(31)
+#define NUM_MSI_MSGS_MASK GENMASK(6, 4)
+#define NUM_MSI_MSGS_SHIFT 4
+
+#define IMASK_LOCAL 0x180
+#define DMA_END_ENGINE_0_MASK 0x00000000u
+#define DMA_END_ENGINE_0_SHIFT 0
+#define DMA_END_ENGINE_1_MASK 0x00000000u
+#define DMA_END_ENGINE_1_SHIFT 1
+#define DMA_ERROR_ENGINE_0_MASK 0x00000100u
+#define DMA_ERROR_ENGINE_0_SHIFT 8
+#define DMA_ERROR_ENGINE_1_MASK 0x00000200u
+#define DMA_ERROR_ENGINE_1_SHIFT 9
+#define A_ATR_EVT_POST_ERR_MASK 0x00010000u
+#define A_ATR_EVT_POST_ERR_SHIFT 16
+#define A_ATR_EVT_FETCH_ERR_MASK 0x00020000u
+#define A_ATR_EVT_FETCH_ERR_SHIFT 17
+#define A_ATR_EVT_DISCARD_ERR_MASK 0x00040000u
+#define A_ATR_EVT_DISCARD_ERR_SHIFT 18
+#define A_ATR_EVT_DOORBELL_MASK 0x00000000u
+#define A_ATR_EVT_DOORBELL_SHIFT 19
+#define P_ATR_EVT_POST_ERR_MASK 0x00100000u
+#define P_ATR_EVT_POST_ERR_SHIFT 20
+#define P_ATR_EVT_FETCH_ERR_MASK 0x00200000u
+#define P_ATR_EVT_FETCH_ERR_SHIFT 21
+#define P_ATR_EVT_DISCARD_ERR_MASK 0x00400000u
+#define P_ATR_EVT_DISCARD_ERR_SHIFT 22
+#define P_ATR_EVT_DOORBELL_MASK 0x00000000u
+#define P_ATR_EVT_DOORBELL_SHIFT 23
+#define PM_MSI_INT_INTA_MASK 0x01000000u
+#define PM_MSI_INT_INTA_SHIFT 24
+#define PM_MSI_INT_INTB_MASK 0x02000000u
+#define PM_MSI_INT_INTB_SHIFT 25
+#define PM_MSI_INT_INTC_MASK 0x04000000u
+#define PM_MSI_INT_INTC_SHIFT 26
+#define PM_MSI_INT_INTD_MASK 0x08000000u
+#define PM_MSI_INT_INTD_SHIFT 27
+#define PM_MSI_INT_INTX_MASK 0x0f000000u
+#define PM_MSI_INT_INTX_SHIFT 24
+#define PM_MSI_INT_MSI_MASK 0x10000000u
+#define PM_MSI_INT_MSI_SHIFT 28
+#define PM_MSI_INT_AER_EVT_MASK 0x20000000u
+#define PM_MSI_INT_AER_EVT_SHIFT 29
+#define PM_MSI_INT_EVENTS_MASK 0x40000000u
+#define PM_MSI_INT_EVENTS_SHIFT 30
+#define PM_MSI_INT_SYS_ERR_MASK 0x80000000u
+#define PM_MSI_INT_SYS_ERR_SHIFT 31
+#define NUM_LOCAL_EVENTS 15
+#define ISTATUS_LOCAL 0x184
+#define IMASK_HOST 0x188
+#define ISTATUS_HOST 0x18c
+#define IMSI_ADDR 0x190
+#define ISTATUS_MSI 0x194
+
+/* PCIe Master table init defines */
+#define ATR0_PCIE_WIN0_SRCADDR_PARAM 0x600u
+#define ATR0_PCIE_ATR_SIZE 0x25
+#define ATR0_PCIE_ATR_SIZE_SHIFT 1
+#define ATR0_PCIE_WIN0_SRC_ADDR 0x604u
+#define ATR0_PCIE_WIN0_TRSL_ADDR_LSB 0x608u
+#define ATR0_PCIE_WIN0_TRSL_ADDR_UDW 0x60cu
+#define ATR0_PCIE_WIN0_TRSL_PARAM 0x610u
+
+/* PCIe AXI slave table init defines */
+#define ATR0_AXI4_SLV0_SRCADDR_PARAM 0x800u
+#define ATR_SIZE_SHIFT 1
+#define ATR_IMPL_ENABLE 1
+#define ATR0_AXI4_SLV0_SRC_ADDR 0x804u
+#define ATR0_AXI4_SLV0_TRSL_ADDR_LSB 0x808u
+#define ATR0_AXI4_SLV0_TRSL_ADDR_UDW 0x80cu
+#define ATR0_AXI4_SLV0_TRSL_PARAM 0x810u
+#define PCIE_TX_RX_INTERFACE 0x00000000u
+#define PCIE_CONFIG_INTERFACE 0x00000001u
+
+#define ATR_ENTRY_SIZE 32
+
+enum plda_int_event {
+ PLDA_AXI_POST_ERR,
+ PLDA_AXI_FETCH_ERR,
+ PLDA_AXI_DISCARD_ERR,
+ PLDA_AXI_DOORBELL,
+ PLDA_PCIE_POST_ERR,
+ PLDA_PCIE_FETCH_ERR,
+ PLDA_PCIE_DISCARD_ERR,
+ PLDA_PCIE_DOORBELL,
+ PLDA_INTX,
+ PLDA_MSI,
+ PLDA_AER_EVENT,
+ PLDA_MISC_EVENTS,
+ PLDA_SYS_ERR,
+ PLDA_INT_EVENT_NUM
+};
+
+#define PLDA_NUM_DMA_EVENTS 16
+
+#define PLDA_MAX_EVENT_NUM (PLDA_NUM_DMA_EVENTS + PLDA_INT_EVENT_NUM)
+
+#endif
--
2.17.1
The number of events is different across platforms. In order to share
interrupt processing code, add a variable that defines the number of
events so that it can be set per-platform instead of hardcoding it.
Signed-off-by: Minda Chen <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
---
drivers/pci/controller/plda/pcie-microchip-host.c | 8 +++++---
drivers/pci/controller/plda/pcie-plda.h | 1 +
2 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index 18bc352db389..0a5cd8b214cd 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -653,7 +653,7 @@ static void plda_handle_event(struct irq_desc *desc)
events = mc_get_events(port);
- for_each_set_bit(bit, &events, NUM_EVENTS)
+ for_each_set_bit(bit, &events, port->num_events)
generic_handle_domain_irq(port->event_domain, bit);
chained_irq_exit(chip, desc);
@@ -816,7 +816,8 @@ static int plda_pcie_init_irq_domains(struct plda_pcie_rp *port)
return -EINVAL;
}
- port->event_domain = irq_domain_add_linear(pcie_intc_node, NUM_EVENTS,
+ port->event_domain = irq_domain_add_linear(pcie_intc_node,
+ port->num_events,
&plda_event_domain_ops,
port);
if (!port->event_domain) {
@@ -920,7 +921,7 @@ static int plda_init_interrupts(struct platform_device *pdev, struct plda_pcie_r
if (irq < 0)
return -ENODEV;
- for (i = 0; i < NUM_EVENTS; i++) {
+ for (i = 0; i < port->num_events; i++) {
event_irq = irq_create_mapping(port->event_domain, i);
if (!event_irq) {
dev_err(dev, "failed to map hwirq %d\n", i);
@@ -1012,6 +1013,7 @@ static int mc_host_probe(struct platform_device *pdev)
bridge_base_addr = port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
plda->bridge_addr = bridge_base_addr;
+ plda->num_events = NUM_EVENTS;
/* Allow enabling MSI by disabling MSI-X */
val = readl(bridge_base_addr + PCIE_PCI_IRQ_DW0);
diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
index e277a5452b5d..f7e900b395f8 100644
--- a/drivers/pci/controller/plda/pcie-plda.h
+++ b/drivers/pci/controller/plda/pcie-plda.h
@@ -124,6 +124,7 @@ struct plda_pcie_rp {
raw_spinlock_t lock;
struct plda_msi msi;
void __iomem *bridge_addr;
+ int num_events;
};
void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
--
2.17.1
Rename two setup functions to plda prefix. Prepare to re-use these two
setup functions.
Since two setup functions names are similar, rename mc_pcie_setup_windows()
to plda_pcie_setup_iomems().
Signed-off-by: Minda Chen <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
---
.../pci/controller/plda/pcie-microchip-host.c | 24 +++++++++----------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index a554a56cc0e8..9b367927cd32 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -838,9 +838,9 @@ static int mc_pcie_init_irq_domains(struct plda_pcie_rp *port)
return mc_allocate_msi_domains(port);
}
-static void mc_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
- phys_addr_t axi_addr, phys_addr_t pci_addr,
- size_t size)
+static void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
+ phys_addr_t axi_addr, phys_addr_t pci_addr,
+ size_t size)
{
u32 atr_sz = ilog2(size) - 1;
u32 val;
@@ -876,8 +876,8 @@ static void mc_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
writel(0, bridge_base_addr + ATR0_PCIE_WIN0_SRC_ADDR);
}
-static int mc_pcie_setup_windows(struct platform_device *pdev,
- struct plda_pcie_rp *port)
+static int plda_pcie_setup_iomems(struct platform_device *pdev,
+ struct plda_pcie_rp *port)
{
void __iomem *bridge_base_addr = port->bridge_addr;
struct pci_host_bridge *bridge = platform_get_drvdata(pdev);
@@ -888,9 +888,9 @@ static int mc_pcie_setup_windows(struct platform_device *pdev,
resource_list_for_each_entry(entry, &bridge->windows) {
if (resource_type(entry->res) == IORESOURCE_MEM) {
pci_addr = entry->res->start - entry->offset;
- mc_pcie_setup_window(bridge_base_addr, index,
- entry->res->start, pci_addr,
- resource_size(entry->res));
+ plda_pcie_setup_window(bridge_base_addr, index,
+ entry->res->start, pci_addr,
+ resource_size(entry->res));
index++;
}
}
@@ -1023,15 +1023,15 @@ static int mc_platform_init(struct pci_config_window *cfg)
int ret;
/* Configure address translation table 0 for PCIe config space */
- mc_pcie_setup_window(bridge_base_addr, 0, cfg->res.start,
- cfg->res.start,
- resource_size(&cfg->res));
+ plda_pcie_setup_window(bridge_base_addr, 0, cfg->res.start,
+ cfg->res.start,
+ resource_size(&cfg->res));
/* Need some fixups in config space */
mc_pcie_enable_msi(port, cfg->win);
/* Configure non-config space outbound ranges */
- ret = mc_pcie_setup_windows(pdev, &port->plda);
+ ret = plda_pcie_setup_iomems(pdev, &port->plda);
if (ret)
return ret;
--
2.17.1
As PLDA dts binding doc(Documentation/devicetree/bindings/pci/
plda,xpressrich3-axi-common.yaml) showed, PLDA PCIe contains an interrupt
controller. Microchip Polarfire PCIe add some PCIe interrupts base on
PLDA interrupt controller.
Microchip Polarfire PCIe additional intrerrupts:
(defined in drivers/pci/controller/plda/pcie-microchip-host.c)
EVENT_PCIE_L2_EXIT
EVENT_PCIE_HOTRST_EXIT
EVENT_PCIE_DLUP_EXIT
EVENT_SEC_TX_RAM_SEC_ERR
EVENT_SEC_RX_RAM_SEC_ERR
...
Both code of request interrupts and mc_event_handler() contain
additional interrupts symbol names, these can not be re-used. So add a
new plda_event_handler() functions, which implements PLDA interrupt
defalt handler, add request_event_irq() callback function to compat
Microchip Polorfire PCIe additional interrupts.
Signed-off-by: Minda Chen <[email protected]>
Acked-by: Conor Dooley <[email protected]>
---
.../pci/controller/plda/pcie-microchip-host.c | 31 ++++++++++++++++---
drivers/pci/controller/plda/pcie-plda.h | 5 +++
2 files changed, 32 insertions(+), 4 deletions(-)
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index 0a5cd8b214cd..bf5ce33ee275 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -642,6 +642,11 @@ static irqreturn_t mc_event_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
+static irqreturn_t plda_event_handler(int irq, void *dev_id)
+{
+ return IRQ_HANDLED;
+}
+
static void plda_handle_event(struct irq_desc *desc)
{
struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
@@ -803,6 +808,17 @@ static int mc_pcie_init_clks(struct device *dev)
return 0;
}
+static int mc_request_event_irq(struct plda_pcie_rp *plda, int event_irq,
+ int event)
+{
+ return devm_request_irq(plda->dev, event_irq, mc_event_handler,
+ 0, event_cause[event].sym, plda);
+}
+
+static const struct plda_event mc_event = {
+ .request_event_irq = mc_request_event_irq,
+};
+
static int plda_pcie_init_irq_domains(struct plda_pcie_rp *port)
{
struct device *dev = port->dev;
@@ -904,7 +920,9 @@ static void mc_disable_interrupts(struct mc_pcie *port)
writel_relaxed(GENMASK(31, 0), bridge_base_addr + ISTATUS_HOST);
}
-static int plda_init_interrupts(struct platform_device *pdev, struct plda_pcie_rp *port)
+static int plda_init_interrupts(struct platform_device *pdev,
+ struct plda_pcie_rp *port,
+ const struct plda_event *event)
{
struct device *dev = &pdev->dev;
int irq;
@@ -928,8 +946,13 @@ static int plda_init_interrupts(struct platform_device *pdev, struct plda_pcie_r
return -ENXIO;
}
- ret = devm_request_irq(dev, event_irq, mc_event_handler,
- 0, event_cause[i].sym, port);
+ if (event->request_event_irq)
+ ret = event->request_event_irq(port, event_irq, i);
+ else
+ ret = devm_request_irq(dev, event_irq,
+ plda_event_handler,
+ 0, NULL, port);
+
if (ret) {
dev_err(dev, "failed to request IRQ %d\n", event_irq);
return ret;
@@ -983,7 +1006,7 @@ static int mc_platform_init(struct pci_config_window *cfg)
return ret;
/* Address translation is up; safe to enable interrupts */
- ret = plda_init_interrupts(pdev, &port->plda);
+ ret = plda_init_interrupts(pdev, &port->plda, &mc_event);
if (ret)
return ret;
diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
index f7e900b395f8..935686bba837 100644
--- a/drivers/pci/controller/plda/pcie-plda.h
+++ b/drivers/pci/controller/plda/pcie-plda.h
@@ -127,6 +127,11 @@ struct plda_pcie_rp {
int num_events;
};
+struct plda_event {
+ int (*request_event_irq)(struct plda_pcie_rp *pcie,
+ int event_irq, int event);
+};
+
void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
phys_addr_t axi_addr, phys_addr_t pci_addr,
size_t size);
--
2.17.1
Move the common data structures definition to head file becauce these two
data structures can be re-used.
Signed-off-by: Minda Chen <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
---
.../pci/controller/plda/pcie-microchip-host.c | 20 ------------------
drivers/pci/controller/plda/pcie-plda.h | 21 +++++++++++++++++++
2 files changed, 21 insertions(+), 20 deletions(-)
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index df0736f688ce..a554a56cc0e8 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -21,9 +21,6 @@
#include "../../pci.h"
#include "pcie-plda.h"
-/* Number of MSI IRQs */
-#define PLDA_MAX_NUM_MSI_IRQS 32
-
/* PCIe Bridge Phy and Controller Phy offsets */
#define MC_PCIE1_BRIDGE_ADDR 0x00008000u
#define MC_PCIE1_CTRL_ADDR 0x0000a000u
@@ -179,23 +176,6 @@ struct event_map {
u32 event_bit;
};
-struct plda_msi {
- struct mutex lock; /* Protect used bitmap */
- struct irq_domain *msi_domain;
- struct irq_domain *dev_domain;
- u32 num_vectors;
- u64 vector_phy;
- DECLARE_BITMAP(used, PLDA_MAX_NUM_MSI_IRQS);
-};
-
-struct plda_pcie_rp {
- struct device *dev;
- struct irq_domain *intx_domain;
- struct irq_domain *event_domain;
- raw_spinlock_t lock;
- struct plda_msi msi;
- void __iomem *bridge_addr;
-};
struct mc_pcie {
struct plda_pcie_rp plda;
diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
index 65e0f3b72184..9ca66916c609 100644
--- a/drivers/pci/controller/plda/pcie-plda.h
+++ b/drivers/pci/controller/plda/pcie-plda.h
@@ -6,6 +6,9 @@
#ifndef _PCIE_PLDA_H
#define _PCIE_PLDA_H
+/* Number of MSI IRQs */
+#define PLDA_MAX_NUM_MSI_IRQS 32
+
/* PCIe Bridge Phy Regs */
#define PCIE_PCI_IRQ_DW0 0xa8
#define MSIX_CAP_MASK BIT(31)
@@ -105,4 +108,22 @@ enum plda_int_event {
#define PLDA_MAX_EVENT_NUM (PLDA_NUM_DMA_EVENTS + PLDA_INT_EVENT_NUM)
+struct plda_msi {
+ struct mutex lock; /* Protect used bitmap */
+ struct irq_domain *msi_domain;
+ struct irq_domain *dev_domain;
+ u32 num_vectors;
+ u64 vector_phy;
+ DECLARE_BITMAP(used, PLDA_MAX_NUM_MSI_IRQS);
+};
+
+struct plda_pcie_rp {
+ struct device *dev;
+ struct irq_domain *intx_domain;
+ struct irq_domain *event_domain;
+ raw_spinlock_t lock;
+ struct plda_msi msi;
+ void __iomem *bridge_addr;
+};
+
#endif
--
2.17.1
The INTx and MSI interrupt event num is different across platforms, so
add two event num fields in struct plda_event.
Signed-off-by: Minda Chen <[email protected]>
Acked-by: Conor Dooley <[email protected]>
---
drivers/pci/controller/plda/pcie-microchip-host.c | 6 ++++--
drivers/pci/controller/plda/pcie-plda.h | 2 ++
2 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index bf5ce33ee275..8a51d3aa7e88 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -817,6 +817,8 @@ static int mc_request_event_irq(struct plda_pcie_rp *plda, int event_irq,
static const struct plda_event mc_event = {
.request_event_irq = mc_request_event_irq,
+ .intx_event = EVENT_LOCAL_PM_MSI_INT_INTX,
+ .msi_event = EVENT_LOCAL_PM_MSI_INT_MSI,
};
static int plda_pcie_init_irq_domains(struct plda_pcie_rp *port)
@@ -960,7 +962,7 @@ static int plda_init_interrupts(struct platform_device *pdev,
}
intx_irq = irq_create_mapping(port->event_domain,
- EVENT_LOCAL_PM_MSI_INT_INTX);
+ event->intx_event);
if (!intx_irq) {
dev_err(dev, "failed to map INTx interrupt\n");
return -ENXIO;
@@ -970,7 +972,7 @@ static int plda_init_interrupts(struct platform_device *pdev,
irq_set_chained_handler_and_data(intx_irq, plda_handle_intx, port);
msi_irq = irq_create_mapping(port->event_domain,
- EVENT_LOCAL_PM_MSI_INT_MSI);
+ event->msi_event);
if (!msi_irq)
return -ENXIO;
diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
index 935686bba837..89172ce18237 100644
--- a/drivers/pci/controller/plda/pcie-plda.h
+++ b/drivers/pci/controller/plda/pcie-plda.h
@@ -130,6 +130,8 @@ struct plda_pcie_rp {
struct plda_event {
int (*request_event_irq)(struct plda_pcie_rp *pcie,
int event_irq, int event);
+ int intx_event;
+ int msi_event;
};
void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
--
2.17.1
As PLDA dts binding doc(Documentation/devicetree/bindings/pci/
plda,xpressrich3-axi-common.yaml) showed, PLDA PCIe contains an interrupt
controller.
PolarFire implements its own PCIe interrupts, additional to the regular
PCIe interrupts, due to lack of an MSI controller, so the interrupt to
event number mapping is different to the PLDA regular interrupts,
necessitating a custom get_events() implementation.
Microchip Polarfire PCIe additional intrerrupts:
(defined in drivers/pci/controller/plda/pcie-microchip-host.c)
EVENT_PCIE_L2_EXIT
EVENT_PCIE_HOTRST_EXIT
EVENT_PCIE_DLUP_EXIT
EVENT_SEC_TX_RAM_SEC_ERR
EVENT_SEC_RX_RAM_SEC_ERR
...
plda_get_events() adds interrupt register to PLDA event num mapping codes.
All The PLDA interrupts can be seen in new added graph.
Signed-off-by: Minda Chen <[email protected]>
Acked-by: Conor Dooley <[email protected]>
---
.../pci/controller/plda/pcie-microchip-host.c | 35 ++++++++++++++++++-
drivers/pci/controller/plda/pcie-plda.h | 32 +++++++++++++++++
2 files changed, 66 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index 8a51d3aa7e88..b3df373a2141 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -626,6 +626,26 @@ static u32 mc_get_events(struct plda_pcie_rp *port)
return events;
}
+static u32 plda_get_events(struct plda_pcie_rp *port)
+{
+ u32 events, val, origin;
+
+ origin = readl_relaxed(port->bridge_addr + ISTATUS_LOCAL);
+
+ /* MSI event and sys events */
+ val = (origin & SYS_AND_MSI_MASK) >> PM_MSI_INT_MSI_SHIFT;
+ events = val << (PM_MSI_INT_MSI_SHIFT - PCI_NUM_INTX + 1);
+
+ /* INTx events */
+ if (origin & PM_MSI_INT_INTX_MASK)
+ events |= BIT(PM_MSI_INT_INTX_SHIFT);
+
+ /* remains are same with register */
+ events |= origin & GENMASK(P_ATR_EVT_DOORBELL_SHIFT, 0);
+
+ return events;
+}
+
static irqreturn_t mc_event_handler(int irq, void *dev_id)
{
struct plda_pcie_rp *port = dev_id;
@@ -656,7 +676,7 @@ static void plda_handle_event(struct irq_desc *desc)
chained_irq_enter(chip, desc);
- events = mc_get_events(port);
+ events = port->event_ops->get_events(port);
for_each_set_bit(bit, &events, port->num_events)
generic_handle_domain_irq(port->event_domain, bit);
@@ -750,6 +770,10 @@ static struct irq_chip mc_event_irq_chip = {
.irq_unmask = mc_unmask_event_irq,
};
+static const struct plda_event_ops plda_event_ops = {
+ .get_events = plda_get_events,
+};
+
static int plda_pcie_event_map(struct irq_domain *domain, unsigned int irq,
irq_hw_number_t hwirq)
{
@@ -815,6 +839,10 @@ static int mc_request_event_irq(struct plda_pcie_rp *plda, int event_irq,
0, event_cause[event].sym, plda);
}
+static const struct plda_event_ops mc_event_ops = {
+ .get_events = mc_get_events,
+};
+
static const struct plda_event mc_event = {
.request_event_irq = mc_request_event_irq,
.intx_event = EVENT_LOCAL_PM_MSI_INT_INTX,
@@ -931,6 +959,9 @@ static int plda_init_interrupts(struct platform_device *pdev,
int i, intx_irq, msi_irq, event_irq;
int ret;
+ if (!port->event_ops)
+ port->event_ops = &plda_event_ops;
+
ret = plda_pcie_init_irq_domains(port);
if (ret) {
dev_err(dev, "failed creating IRQ domains\n");
@@ -1007,6 +1038,8 @@ static int mc_platform_init(struct pci_config_window *cfg)
if (ret)
return ret;
+ port->plda.event_ops = &mc_event_ops;
+
/* Address translation is up; safe to enable interrupts */
ret = plda_init_interrupts(pdev, &port->plda, &mc_event);
if (ret)
diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
index 89172ce18237..e0e5e7cc8434 100644
--- a/drivers/pci/controller/plda/pcie-plda.h
+++ b/drivers/pci/controller/plda/pcie-plda.h
@@ -58,6 +58,7 @@
#define PM_MSI_INT_EVENTS_SHIFT 30
#define PM_MSI_INT_SYS_ERR_MASK 0x80000000u
#define PM_MSI_INT_SYS_ERR_SHIFT 31
+#define SYS_AND_MSI_MASK GENMASK(31, 28)
#define NUM_LOCAL_EVENTS 15
#define ISTATUS_LOCAL 0x184
#define IMASK_HOST 0x188
@@ -108,6 +109,36 @@ enum plda_int_event {
#define PLDA_MAX_EVENT_NUM (PLDA_NUM_DMA_EVENTS + PLDA_INT_EVENT_NUM)
+/*
+ * PLDA interrupt register
+ *
+ * 31 27 23 15 7 0
+ * +--+--+--+-+------+-+-+-+-+-+-+-+-+-----------+-----------+
+ * |12|11|10|9| intx |7|6|5|4|3|2|1|0| DMA error | DMA end |
+ * +--+--+--+-+------+-+-+-+-+-+-+-+-+-----------+-----------+
+ * bit 0-7 DMA interrupt end : reserved for vendor implement
+ * bit 8-15 DMA error : reserved for vendor implement
+ * 0: AXI post error (PLDA_AXI_POST_ERR)
+ * 1: AXI fetch error (PLDA_AXI_FETCH_ERR)
+ * 2: AXI discard error (PLDA_AXI_DISCARD_ERR)
+ * 3: AXI doorbell (PLDA_PCIE_DOORBELL)
+ * 4: PCIe post error (PLDA_PCIE_POST_ERR)
+ * 5: PCIe fetch error (PLDA_PCIE_FETCH_ERR)
+ * 6: PCIe discard error (PLDA_PCIE_DISCARD_ERR)
+ * 7: PCIe doorbell (PLDA_PCIE_DOORBELL)
+ * 8: 4 INTx interruts (PLDA_INTX)
+ * 9: MSI interrupt (PLDA_MSI)
+ * 10: AER event (PLDA_AER_EVENT)
+ * 11: PM/LTR/Hotplug (PLDA_MISC_EVENTS)
+ * 12: System error (PLDA_SYS_ERR)
+ */
+
+struct plda_pcie_rp;
+
+struct plda_event_ops {
+ u32 (*get_events)(struct plda_pcie_rp *pcie);
+};
+
struct plda_msi {
struct mutex lock; /* Protect used bitmap */
struct irq_domain *msi_domain;
@@ -123,6 +154,7 @@ struct plda_pcie_rp {
struct irq_domain *event_domain;
raw_spinlock_t lock;
struct plda_msi msi;
+ const struct plda_event_ops *event_ops;
void __iomem *bridge_addr;
int num_events;
};
--
2.17.1
As PLDA dts binding doc(Documentation/devicetree/bindings/pci/
plda,xpressrich3-axi-common.yaml) showed, PLDA PCIe contains an interrupt
controller.
Microchip PolarFire PCIE event IRQs includes PLDA interrupts and
Polarfire additional interrupts. The interrupt irqchip ops includes
ack/mask/unmask interrupt ops, which will write correct registers.
Microchip Polarfire PCIe additional interrupts require to write Polarfire
SoC self-defined registers. So Microchip PCIe event irqchip ops can not
be re-used.
Microchip Polarfire PCIe additional intrerrupts:
(defined in drivers/pci/controller/plda/pcie-microchip-host.c)
EVENT_PCIE_L2_EXIT
EVENT_PCIE_HOTRST_EXIT
EVENT_PCIE_DLUP_EXIT
EVENT_SEC_TX_RAM_SEC_ERR
EVENT_SEC_RX_RAM_SEC_ERR
...
To support PLDA its own event IRQ process, implements PLDA irqchip ops and
add event irqchip field to struct pcie_plda_rp.
Signed-off-by: Minda Chen <[email protected]>
Acked-by: Conor Dooley <[email protected]>
---
.../pci/controller/plda/pcie-microchip-host.c | 66 ++++++++++++++++++-
drivers/pci/controller/plda/pcie-plda.h | 34 +++++-----
2 files changed, 84 insertions(+), 16 deletions(-)
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index b3df373a2141..beaf5c27da84 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -770,6 +770,64 @@ static struct irq_chip mc_event_irq_chip = {
.irq_unmask = mc_unmask_event_irq,
};
+static u32 plda_hwirq_to_mask(int hwirq)
+{
+ u32 mask;
+
+ /* hwirq 23 - 0 are the same with register */
+ if (hwirq < EVENT_PM_MSI_INT_INTX)
+ mask = BIT(hwirq);
+ else if (hwirq == EVENT_PM_MSI_INT_INTX)
+ mask = PM_MSI_INT_INTX_MASK;
+ else
+ mask = BIT(hwirq + PCI_NUM_INTX - 1);
+
+ return mask;
+}
+
+static void plda_ack_event_irq(struct irq_data *data)
+{
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
+
+ writel_relaxed(plda_hwirq_to_mask(data->hwirq),
+ port->bridge_addr + ISTATUS_LOCAL);
+}
+
+static void plda_mask_event_irq(struct irq_data *data)
+{
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
+ u32 mask, val;
+
+ mask = plda_hwirq_to_mask(data->hwirq);
+
+ raw_spin_lock(&port->lock);
+ val = readl_relaxed(port->bridge_addr + IMASK_LOCAL);
+ val &= ~mask;
+ writel_relaxed(val, port->bridge_addr + IMASK_LOCAL);
+ raw_spin_unlock(&port->lock);
+}
+
+static void plda_unmask_event_irq(struct irq_data *data)
+{
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
+ u32 mask, val;
+
+ mask = plda_hwirq_to_mask(data->hwirq);
+
+ raw_spin_lock(&port->lock);
+ val = readl_relaxed(port->bridge_addr + IMASK_LOCAL);
+ val |= mask;
+ writel_relaxed(val, port->bridge_addr + IMASK_LOCAL);
+ raw_spin_unlock(&port->lock);
+}
+
+static struct irq_chip plda_event_irq_chip = {
+ .name = "PLDA PCIe EVENT",
+ .irq_ack = plda_ack_event_irq,
+ .irq_mask = plda_mask_event_irq,
+ .irq_unmask = plda_unmask_event_irq,
+};
+
static const struct plda_event_ops plda_event_ops = {
.get_events = plda_get_events,
};
@@ -777,7 +835,9 @@ static const struct plda_event_ops plda_event_ops = {
static int plda_pcie_event_map(struct irq_domain *domain, unsigned int irq,
irq_hw_number_t hwirq)
{
- irq_set_chip_and_handler(irq, &mc_event_irq_chip, handle_level_irq);
+ struct plda_pcie_rp *port = (void *)domain->host_data;
+
+ irq_set_chip_and_handler(irq, port->event_irq_chip, handle_level_irq);
irq_set_chip_data(irq, domain->host_data);
return 0;
@@ -962,6 +1022,9 @@ static int plda_init_interrupts(struct platform_device *pdev,
if (!port->event_ops)
port->event_ops = &plda_event_ops;
+ if (!port->event_irq_chip)
+ port->event_irq_chip = &plda_event_irq_chip;
+
ret = plda_pcie_init_irq_domains(port);
if (ret) {
dev_err(dev, "failed creating IRQ domains\n");
@@ -1039,6 +1102,7 @@ static int mc_platform_init(struct pci_config_window *cfg)
return ret;
port->plda.event_ops = &mc_event_ops;
+ port->plda.event_irq_chip = &mc_event_irq_chip;
/* Address translation is up; safe to enable interrupts */
ret = plda_init_interrupts(pdev, &port->plda, &mc_event);
diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
index e0e5e7cc8434..0e5157eb3a32 100644
--- a/drivers/pci/controller/plda/pcie-plda.h
+++ b/drivers/pci/controller/plda/pcie-plda.h
@@ -107,6 +107,8 @@ enum plda_int_event {
#define PLDA_NUM_DMA_EVENTS 16
+#define EVENT_PM_MSI_INT_INTX (PLDA_NUM_DMA_EVENTS + PLDA_INTX)
+#define EVENT_PM_MSI_INT_MSI (PLDA_NUM_DMA_EVENTS + PLDA_MSI)
#define PLDA_MAX_EVENT_NUM (PLDA_NUM_DMA_EVENTS + PLDA_INT_EVENT_NUM)
/*
@@ -116,21 +118,22 @@ enum plda_int_event {
* +--+--+--+-+------+-+-+-+-+-+-+-+-+-----------+-----------+
* |12|11|10|9| intx |7|6|5|4|3|2|1|0| DMA error | DMA end |
* +--+--+--+-+------+-+-+-+-+-+-+-+-+-----------+-----------+
- * bit 0-7 DMA interrupt end : reserved for vendor implement
- * bit 8-15 DMA error : reserved for vendor implement
- * 0: AXI post error (PLDA_AXI_POST_ERR)
- * 1: AXI fetch error (PLDA_AXI_FETCH_ERR)
- * 2: AXI discard error (PLDA_AXI_DISCARD_ERR)
- * 3: AXI doorbell (PLDA_PCIE_DOORBELL)
- * 4: PCIe post error (PLDA_PCIE_POST_ERR)
- * 5: PCIe fetch error (PLDA_PCIE_FETCH_ERR)
- * 6: PCIe discard error (PLDA_PCIE_DISCARD_ERR)
- * 7: PCIe doorbell (PLDA_PCIE_DOORBELL)
- * 8: 4 INTx interruts (PLDA_INTX)
- * 9: MSI interrupt (PLDA_MSI)
- * 10: AER event (PLDA_AER_EVENT)
- * 11: PM/LTR/Hotplug (PLDA_MISC_EVENTS)
- * 12: System error (PLDA_SYS_ERR)
+ * event bit
+ * 0-7 (0-7) DMA interrupt end : reserved for vendor implement
+ * 8-15 (8-15) DMA error : reserved for vendor implement
+ * 16 (16) AXI post error (PLDA_AXI_POST_ERR)
+ * 17 (17) AXI fetch error (PLDA_AXI_FETCH_ERR)
+ * 18 (18) AXI discard error (PLDA_AXI_DISCARD_ERR)
+ * 19 (19) AXI doorbell (PLDA_PCIE_DOORBELL)
+ * 20 (20) PCIe post error (PLDA_PCIE_POST_ERR)
+ * 21 (21) PCIe fetch error (PLDA_PCIE_FETCH_ERR)
+ * 22 (22) PCIe discard error (PLDA_PCIE_DISCARD_ERR)
+ * 23 (23) PCIe doorbell (PLDA_PCIE_DOORBELL)
+ * 24 (27-24) INTx interruts (PLDA_INTX)
+ * 25 (28): MSI interrupt (PLDA_MSI)
+ * 26 (29): AER event (PLDA_AER_EVENT)
+ * 27 (30): PM/LTR/Hotplug (PLDA_MISC_EVENTS)
+ * 28 (31): System error (PLDA_SYS_ERR)
*/
struct plda_pcie_rp;
@@ -155,6 +158,7 @@ struct plda_pcie_rp {
raw_spinlock_t lock;
struct plda_msi msi;
const struct plda_event_ops *event_ops;
+ const struct irq_chip *event_irq_chip;
void __iomem *bridge_addr;
int num_events;
};
--
2.17.1
PLDA DMA interrupts are not all implemented, The non-implemented
interrupts should be masked. So add a bitmap field to mask the non-
implemented interrupts.
Signed-off-by: Minda Chen <[email protected]>
---
drivers/pci/controller/plda/pcie-microchip-host.c | 1 +
drivers/pci/controller/plda/pcie-plda-host.c | 6 ++++--
drivers/pci/controller/plda/pcie-plda.h | 1 +
3 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index 105964306b71..48f60a04b740 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -636,6 +636,7 @@ static int mc_platform_init(struct pci_config_window *cfg)
port->plda.event_ops = &mc_event_ops;
port->plda.event_irq_chip = &mc_event_irq_chip;
+ port->plda.events_bitmap = GENMASK(NUM_EVENTS - 1, 0);
/* Address translation is up; safe to enable interrupts */
ret = plda_init_interrupts(pdev, &port->plda, &mc_event);
diff --git a/drivers/pci/controller/plda/pcie-plda-host.c b/drivers/pci/controller/plda/pcie-plda-host.c
index 98c51e594efe..a040e7e5492f 100644
--- a/drivers/pci/controller/plda/pcie-plda-host.c
+++ b/drivers/pci/controller/plda/pcie-plda-host.c
@@ -290,6 +290,7 @@ static void plda_handle_event(struct irq_desc *desc)
events = port->event_ops->get_events(port);
+ events &= port->events_bitmap;
for_each_set_bit(bit, &events, port->num_events)
generic_handle_domain_irq(port->event_domain, bit);
@@ -420,8 +421,9 @@ int plda_init_interrupts(struct platform_device *pdev,
{
struct device *dev = &pdev->dev;
int irq;
- int i, intx_irq, msi_irq, event_irq;
+ int intx_irq, msi_irq, event_irq;
int ret;
+ u32 i;
if (!port->event_ops)
port->event_ops = &plda_event_ops;
@@ -439,7 +441,7 @@ int plda_init_interrupts(struct platform_device *pdev,
if (irq < 0)
return -ENODEV;
- for (i = 0; i < port->num_events; i++) {
+ for_each_set_bit(i, &port->events_bitmap, port->num_events) {
event_irq = irq_create_mapping(port->event_domain, i);
if (!event_irq) {
dev_err(dev, "failed to map hwirq %d\n", i);
diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
index eb9e6f304985..c3d8c141e44d 100644
--- a/drivers/pci/controller/plda/pcie-plda.h
+++ b/drivers/pci/controller/plda/pcie-plda.h
@@ -160,6 +160,7 @@ struct plda_pcie_rp {
const struct plda_event_ops *event_ops;
const struct irq_chip *event_irq_chip;
void __iomem *bridge_addr;
+ unsigned long events_bitmap;
int num_events;
};
--
2.17.1
Move IRQ related functions to common file pcie-plda-host.c
The re-use code including MSI, INTx, event interrupts and IRQ init
functions.
Signed-off-by: Minda Chen <[email protected]>
Acked-by: Conor Dooley <[email protected]>
---
.../pci/controller/plda/pcie-microchip-host.c | 467 -----------------
drivers/pci/controller/plda/pcie-plda-host.c | 473 ++++++++++++++++++
drivers/pci/controller/plda/pcie-plda.h | 3 +
3 files changed, 476 insertions(+), 467 deletions(-)
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index beaf5c27da84..105964306b71 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -318,244 +318,6 @@ static void mc_pcie_enable_msi(struct mc_pcie *port, void __iomem *ecam)
ecam + MC_MSI_CAP_CTRL_OFFSET + PCI_MSI_ADDRESS_HI);
}
-static void plda_handle_msi(struct irq_desc *desc)
-{
- struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
- struct irq_chip *chip = irq_desc_get_chip(desc);
- struct device *dev = port->dev;
- struct plda_msi *msi = &port->msi;
- void __iomem *bridge_base_addr = port->bridge_addr;
- unsigned long status;
- u32 bit;
- int ret;
-
- chained_irq_enter(chip, desc);
-
- status = readl_relaxed(bridge_base_addr + ISTATUS_LOCAL);
- if (status & PM_MSI_INT_MSI_MASK) {
- writel_relaxed(status & PM_MSI_INT_MSI_MASK, bridge_base_addr + ISTATUS_LOCAL);
- status = readl_relaxed(bridge_base_addr + ISTATUS_MSI);
- for_each_set_bit(bit, &status, msi->num_vectors) {
- ret = generic_handle_domain_irq(msi->dev_domain, bit);
- if (ret)
- dev_err_ratelimited(dev, "bad MSI IRQ %d\n",
- bit);
- }
- }
-
- chained_irq_exit(chip, desc);
-}
-
-static void plda_msi_bottom_irq_ack(struct irq_data *data)
-{
- struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
- void __iomem *bridge_base_addr = port->bridge_addr;
- u32 bitpos = data->hwirq;
-
- writel_relaxed(BIT(bitpos), bridge_base_addr + ISTATUS_MSI);
-}
-
-static void plda_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
-{
- struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
- phys_addr_t addr = port->msi.vector_phy;
-
- msg->address_lo = lower_32_bits(addr);
- msg->address_hi = upper_32_bits(addr);
- msg->data = data->hwirq;
-
- dev_dbg(port->dev, "msi#%x address_hi %#x address_lo %#x\n",
- (int)data->hwirq, msg->address_hi, msg->address_lo);
-}
-
-static int plda_msi_set_affinity(struct irq_data *irq_data,
- const struct cpumask *mask, bool force)
-{
- return -EINVAL;
-}
-
-static struct irq_chip plda_msi_bottom_irq_chip = {
- .name = "PLDA MSI",
- .irq_ack = plda_msi_bottom_irq_ack,
- .irq_compose_msi_msg = plda_compose_msi_msg,
- .irq_set_affinity = plda_msi_set_affinity,
-};
-
-static int plda_irq_msi_domain_alloc(struct irq_domain *domain,
- unsigned int virq,
- unsigned int nr_irqs,
- void *args)
-{
- struct plda_pcie_rp *port = domain->host_data;
- struct plda_msi *msi = &port->msi;
- unsigned long bit;
-
- mutex_lock(&msi->lock);
- bit = find_first_zero_bit(msi->used, msi->num_vectors);
- if (bit >= msi->num_vectors) {
- mutex_unlock(&msi->lock);
- return -ENOSPC;
- }
-
- set_bit(bit, msi->used);
-
- irq_domain_set_info(domain, virq, bit, &plda_msi_bottom_irq_chip,
- domain->host_data, handle_edge_irq, NULL, NULL);
-
- mutex_unlock(&msi->lock);
-
- return 0;
-}
-
-static void plda_irq_msi_domain_free(struct irq_domain *domain,
- unsigned int virq,
- unsigned int nr_irqs)
-{
- struct irq_data *d = irq_domain_get_irq_data(domain, virq);
- struct plda_pcie_rp *port = irq_data_get_irq_chip_data(d);
- struct plda_msi *msi = &port->msi;
-
- mutex_lock(&msi->lock);
-
- if (test_bit(d->hwirq, msi->used))
- __clear_bit(d->hwirq, msi->used);
- else
- dev_err(port->dev, "trying to free unused MSI%lu\n", d->hwirq);
-
- mutex_unlock(&msi->lock);
-}
-
-static const struct irq_domain_ops msi_domain_ops = {
- .alloc = plda_irq_msi_domain_alloc,
- .free = plda_irq_msi_domain_free,
-};
-
-static struct irq_chip plda_msi_irq_chip = {
- .name = "PLDA PCIe MSI",
- .irq_ack = irq_chip_ack_parent,
- .irq_mask = pci_msi_mask_irq,
- .irq_unmask = pci_msi_unmask_irq,
-};
-
-static struct msi_domain_info plda_msi_domain_info = {
- .flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
- MSI_FLAG_PCI_MSIX),
- .chip = &plda_msi_irq_chip,
-};
-
-static int plda_allocate_msi_domains(struct plda_pcie_rp *port)
-{
- struct device *dev = port->dev;
- struct fwnode_handle *fwnode = of_node_to_fwnode(dev->of_node);
- struct plda_msi *msi = &port->msi;
-
- mutex_init(&port->msi.lock);
-
- msi->dev_domain = irq_domain_add_linear(NULL, msi->num_vectors,
- &msi_domain_ops, port);
- if (!msi->dev_domain) {
- dev_err(dev, "failed to create IRQ domain\n");
- return -ENOMEM;
- }
-
- msi->msi_domain = pci_msi_create_irq_domain(fwnode,
- &plda_msi_domain_info,
- msi->dev_domain);
- if (!msi->msi_domain) {
- dev_err(dev, "failed to create MSI domain\n");
- irq_domain_remove(msi->dev_domain);
- return -ENOMEM;
- }
-
- return 0;
-}
-
-static void plda_handle_intx(struct irq_desc *desc)
-{
- struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
- struct irq_chip *chip = irq_desc_get_chip(desc);
- struct device *dev = port->dev;
- void __iomem *bridge_base_addr = port->bridge_addr;
- unsigned long status;
- u32 bit;
- int ret;
-
- chained_irq_enter(chip, desc);
-
- status = readl_relaxed(bridge_base_addr + ISTATUS_LOCAL);
- if (status & PM_MSI_INT_INTX_MASK) {
- status &= PM_MSI_INT_INTX_MASK;
- status >>= PM_MSI_INT_INTX_SHIFT;
- for_each_set_bit(bit, &status, PCI_NUM_INTX) {
- ret = generic_handle_domain_irq(port->intx_domain, bit);
- if (ret)
- dev_err_ratelimited(dev, "bad INTx IRQ %d\n",
- bit);
- }
- }
-
- chained_irq_exit(chip, desc);
-}
-
-static void plda_ack_intx_irq(struct irq_data *data)
-{
- struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
- void __iomem *bridge_base_addr = port->bridge_addr;
- u32 mask = BIT(data->hwirq + PM_MSI_INT_INTX_SHIFT);
-
- writel_relaxed(mask, bridge_base_addr + ISTATUS_LOCAL);
-}
-
-static void plda_mask_intx_irq(struct irq_data *data)
-{
- struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
- void __iomem *bridge_base_addr = port->bridge_addr;
- unsigned long flags;
- u32 mask = BIT(data->hwirq + PM_MSI_INT_INTX_SHIFT);
- u32 val;
-
- raw_spin_lock_irqsave(&port->lock, flags);
- val = readl_relaxed(bridge_base_addr + IMASK_LOCAL);
- val &= ~mask;
- writel_relaxed(val, bridge_base_addr + IMASK_LOCAL);
- raw_spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static void plda_unmask_intx_irq(struct irq_data *data)
-{
- struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
- void __iomem *bridge_base_addr = port->bridge_addr;
- unsigned long flags;
- u32 mask = BIT(data->hwirq + PM_MSI_INT_INTX_SHIFT);
- u32 val;
-
- raw_spin_lock_irqsave(&port->lock, flags);
- val = readl_relaxed(bridge_base_addr + IMASK_LOCAL);
- val |= mask;
- writel_relaxed(val, bridge_base_addr + IMASK_LOCAL);
- raw_spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static struct irq_chip plda_intx_irq_chip = {
- .name = "PLDA PCIe INTx",
- .irq_ack = plda_ack_intx_irq,
- .irq_mask = plda_mask_intx_irq,
- .irq_unmask = plda_unmask_intx_irq,
-};
-
-static int plda_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
- irq_hw_number_t hwirq)
-{
- irq_set_chip_and_handler(irq, &plda_intx_irq_chip, handle_level_irq);
- irq_set_chip_data(irq, domain->host_data);
-
- return 0;
-}
-
-static const struct irq_domain_ops intx_domain_ops = {
- .map = plda_pcie_intx_map,
-};
-
static inline u32 reg_to_event(u32 reg, struct event_map field)
{
return (reg & field.reg_mask) ? BIT(field.event_bit) : 0;
@@ -626,26 +388,6 @@ static u32 mc_get_events(struct plda_pcie_rp *port)
return events;
}
-static u32 plda_get_events(struct plda_pcie_rp *port)
-{
- u32 events, val, origin;
-
- origin = readl_relaxed(port->bridge_addr + ISTATUS_LOCAL);
-
- /* MSI event and sys events */
- val = (origin & SYS_AND_MSI_MASK) >> PM_MSI_INT_MSI_SHIFT;
- events = val << (PM_MSI_INT_MSI_SHIFT - PCI_NUM_INTX + 1);
-
- /* INTx events */
- if (origin & PM_MSI_INT_INTX_MASK)
- events |= BIT(PM_MSI_INT_INTX_SHIFT);
-
- /* remains are same with register */
- events |= origin & GENMASK(P_ATR_EVT_DOORBELL_SHIFT, 0);
-
- return events;
-}
-
static irqreturn_t mc_event_handler(int irq, void *dev_id)
{
struct plda_pcie_rp *port = dev_id;
@@ -662,28 +404,6 @@ static irqreturn_t mc_event_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static irqreturn_t plda_event_handler(int irq, void *dev_id)
-{
- return IRQ_HANDLED;
-}
-
-static void plda_handle_event(struct irq_desc *desc)
-{
- struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
- unsigned long events;
- u32 bit;
- struct irq_chip *chip = irq_desc_get_chip(desc);
-
- chained_irq_enter(chip, desc);
-
- events = port->event_ops->get_events(port);
-
- for_each_set_bit(bit, &events, port->num_events)
- generic_handle_domain_irq(port->event_domain, bit);
-
- chained_irq_exit(chip, desc);
-}
-
static void mc_ack_event_irq(struct irq_data *data)
{
struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
@@ -770,83 +490,6 @@ static struct irq_chip mc_event_irq_chip = {
.irq_unmask = mc_unmask_event_irq,
};
-static u32 plda_hwirq_to_mask(int hwirq)
-{
- u32 mask;
-
- /* hwirq 23 - 0 are the same with register */
- if (hwirq < EVENT_PM_MSI_INT_INTX)
- mask = BIT(hwirq);
- else if (hwirq == EVENT_PM_MSI_INT_INTX)
- mask = PM_MSI_INT_INTX_MASK;
- else
- mask = BIT(hwirq + PCI_NUM_INTX - 1);
-
- return mask;
-}
-
-static void plda_ack_event_irq(struct irq_data *data)
-{
- struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
-
- writel_relaxed(plda_hwirq_to_mask(data->hwirq),
- port->bridge_addr + ISTATUS_LOCAL);
-}
-
-static void plda_mask_event_irq(struct irq_data *data)
-{
- struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
- u32 mask, val;
-
- mask = plda_hwirq_to_mask(data->hwirq);
-
- raw_spin_lock(&port->lock);
- val = readl_relaxed(port->bridge_addr + IMASK_LOCAL);
- val &= ~mask;
- writel_relaxed(val, port->bridge_addr + IMASK_LOCAL);
- raw_spin_unlock(&port->lock);
-}
-
-static void plda_unmask_event_irq(struct irq_data *data)
-{
- struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
- u32 mask, val;
-
- mask = plda_hwirq_to_mask(data->hwirq);
-
- raw_spin_lock(&port->lock);
- val = readl_relaxed(port->bridge_addr + IMASK_LOCAL);
- val |= mask;
- writel_relaxed(val, port->bridge_addr + IMASK_LOCAL);
- raw_spin_unlock(&port->lock);
-}
-
-static struct irq_chip plda_event_irq_chip = {
- .name = "PLDA PCIe EVENT",
- .irq_ack = plda_ack_event_irq,
- .irq_mask = plda_mask_event_irq,
- .irq_unmask = plda_unmask_event_irq,
-};
-
-static const struct plda_event_ops plda_event_ops = {
- .get_events = plda_get_events,
-};
-
-static int plda_pcie_event_map(struct irq_domain *domain, unsigned int irq,
- irq_hw_number_t hwirq)
-{
- struct plda_pcie_rp *port = (void *)domain->host_data;
-
- irq_set_chip_and_handler(irq, port->event_irq_chip, handle_level_irq);
- irq_set_chip_data(irq, domain->host_data);
-
- return 0;
-}
-
-static const struct irq_domain_ops plda_event_domain_ops = {
- .map = plda_pcie_event_map,
-};
-
static inline void mc_pcie_deinit_clk(void *data)
{
struct clk *clk = data;
@@ -909,47 +552,6 @@ static const struct plda_event mc_event = {
.msi_event = EVENT_LOCAL_PM_MSI_INT_MSI,
};
-static int plda_pcie_init_irq_domains(struct plda_pcie_rp *port)
-{
- struct device *dev = port->dev;
- struct device_node *node = dev->of_node;
- struct device_node *pcie_intc_node;
-
- /* Setup INTx */
- pcie_intc_node = of_get_next_child(node, NULL);
- if (!pcie_intc_node) {
- dev_err(dev, "failed to find PCIe Intc node\n");
- return -EINVAL;
- }
-
- port->event_domain = irq_domain_add_linear(pcie_intc_node,
- port->num_events,
- &plda_event_domain_ops,
- port);
- if (!port->event_domain) {
- dev_err(dev, "failed to get event domain\n");
- of_node_put(pcie_intc_node);
- return -ENOMEM;
- }
-
- irq_domain_update_bus_token(port->event_domain, DOMAIN_BUS_NEXUS);
-
- port->intx_domain = irq_domain_add_linear(pcie_intc_node, PCI_NUM_INTX,
- &intx_domain_ops, port);
- if (!port->intx_domain) {
- dev_err(dev, "failed to get an INTx IRQ domain\n");
- of_node_put(pcie_intc_node);
- return -ENOMEM;
- }
-
- irq_domain_update_bus_token(port->intx_domain, DOMAIN_BUS_WIRED);
-
- of_node_put(pcie_intc_node);
- raw_spin_lock_init(&port->lock);
-
- return plda_allocate_msi_domains(port);
-}
-
static inline void mc_clear_secs(struct mc_pcie *port)
{
void __iomem *ctrl_base_addr = port->axi_base_addr + MC_PCIE_CTRL_ADDR;
@@ -1010,75 +612,6 @@ static void mc_disable_interrupts(struct mc_pcie *port)
writel_relaxed(GENMASK(31, 0), bridge_base_addr + ISTATUS_HOST);
}
-static int plda_init_interrupts(struct platform_device *pdev,
- struct plda_pcie_rp *port,
- const struct plda_event *event)
-{
- struct device *dev = &pdev->dev;
- int irq;
- int i, intx_irq, msi_irq, event_irq;
- int ret;
-
- if (!port->event_ops)
- port->event_ops = &plda_event_ops;
-
- if (!port->event_irq_chip)
- port->event_irq_chip = &plda_event_irq_chip;
-
- ret = plda_pcie_init_irq_domains(port);
- if (ret) {
- dev_err(dev, "failed creating IRQ domains\n");
- return ret;
- }
-
- irq = platform_get_irq(pdev, 0);
- if (irq < 0)
- return -ENODEV;
-
- for (i = 0; i < port->num_events; i++) {
- event_irq = irq_create_mapping(port->event_domain, i);
- if (!event_irq) {
- dev_err(dev, "failed to map hwirq %d\n", i);
- return -ENXIO;
- }
-
- if (event->request_event_irq)
- ret = event->request_event_irq(port, event_irq, i);
- else
- ret = devm_request_irq(dev, event_irq,
- plda_event_handler,
- 0, NULL, port);
-
- if (ret) {
- dev_err(dev, "failed to request IRQ %d\n", event_irq);
- return ret;
- }
- }
-
- intx_irq = irq_create_mapping(port->event_domain,
- event->intx_event);
- if (!intx_irq) {
- dev_err(dev, "failed to map INTx interrupt\n");
- return -ENXIO;
- }
-
- /* Plug the INTx chained handler */
- irq_set_chained_handler_and_data(intx_irq, plda_handle_intx, port);
-
- msi_irq = irq_create_mapping(port->event_domain,
- event->msi_event);
- if (!msi_irq)
- return -ENXIO;
-
- /* Plug the MSI chained handler */
- irq_set_chained_handler_and_data(msi_irq, plda_handle_msi, port);
-
- /* Plug the main event chained handler */
- irq_set_chained_handler_and_data(irq, plda_handle_event, port);
-
- return 0;
-}
-
static int mc_platform_init(struct pci_config_window *cfg)
{
struct device *dev = cfg->parent;
diff --git a/drivers/pci/controller/plda/pcie-plda-host.c b/drivers/pci/controller/plda/pcie-plda-host.c
index 05ea68baebfb..98c51e594efe 100644
--- a/drivers/pci/controller/plda/pcie-plda-host.c
+++ b/drivers/pci/controller/plda/pcie-plda-host.c
@@ -7,10 +7,483 @@
* Author: Daire McNamara <[email protected]>
*/
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/msi.h>
+#include <linux/pci_regs.h>
#include <linux/pci-ecam.h>
#include "pcie-plda.h"
+static void plda_handle_msi(struct irq_desc *desc)
+{
+ struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ struct device *dev = port->dev;
+ struct plda_msi *msi = &port->msi;
+ void __iomem *bridge_base_addr = port->bridge_addr;
+ unsigned long status;
+ u32 bit;
+ int ret;
+
+ chained_irq_enter(chip, desc);
+
+ status = readl_relaxed(bridge_base_addr + ISTATUS_LOCAL);
+ if (status & PM_MSI_INT_MSI_MASK) {
+ writel_relaxed(status & PM_MSI_INT_MSI_MASK,
+ bridge_base_addr + ISTATUS_LOCAL);
+ status = readl_relaxed(bridge_base_addr + ISTATUS_MSI);
+ for_each_set_bit(bit, &status, msi->num_vectors) {
+ ret = generic_handle_domain_irq(msi->dev_domain, bit);
+ if (ret)
+ dev_err_ratelimited(dev, "bad MSI IRQ %d\n",
+ bit);
+ }
+ }
+
+ chained_irq_exit(chip, desc);
+}
+
+static void plda_msi_bottom_irq_ack(struct irq_data *data)
+{
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
+ void __iomem *bridge_base_addr = port->bridge_addr;
+ u32 bitpos = data->hwirq;
+
+ writel_relaxed(BIT(bitpos), bridge_base_addr + ISTATUS_MSI);
+}
+
+static void plda_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
+{
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
+ phys_addr_t addr = port->msi.vector_phy;
+
+ msg->address_lo = lower_32_bits(addr);
+ msg->address_hi = upper_32_bits(addr);
+ msg->data = data->hwirq;
+
+ dev_dbg(port->dev, "msi#%x address_hi %#x address_lo %#x\n",
+ (int)data->hwirq, msg->address_hi, msg->address_lo);
+}
+
+static int plda_msi_set_affinity(struct irq_data *irq_data,
+ const struct cpumask *mask, bool force)
+{
+ return -EINVAL;
+}
+
+static struct irq_chip plda_msi_bottom_irq_chip = {
+ .name = "PLDA MSI",
+ .irq_ack = plda_msi_bottom_irq_ack,
+ .irq_compose_msi_msg = plda_compose_msi_msg,
+ .irq_set_affinity = plda_msi_set_affinity,
+};
+
+static int plda_irq_msi_domain_alloc(struct irq_domain *domain,
+ unsigned int virq,
+ unsigned int nr_irqs,
+ void *args)
+{
+ struct plda_pcie_rp *port = domain->host_data;
+ struct plda_msi *msi = &port->msi;
+ unsigned long bit;
+
+ mutex_lock(&msi->lock);
+ bit = find_first_zero_bit(msi->used, msi->num_vectors);
+ if (bit >= msi->num_vectors) {
+ mutex_unlock(&msi->lock);
+ return -ENOSPC;
+ }
+
+ set_bit(bit, msi->used);
+
+ irq_domain_set_info(domain, virq, bit, &plda_msi_bottom_irq_chip,
+ domain->host_data, handle_edge_irq, NULL, NULL);
+
+ mutex_unlock(&msi->lock);
+
+ return 0;
+}
+
+static void plda_irq_msi_domain_free(struct irq_domain *domain,
+ unsigned int virq,
+ unsigned int nr_irqs)
+{
+ struct irq_data *d = irq_domain_get_irq_data(domain, virq);
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(d);
+ struct plda_msi *msi = &port->msi;
+
+ mutex_lock(&msi->lock);
+
+ if (test_bit(d->hwirq, msi->used))
+ __clear_bit(d->hwirq, msi->used);
+ else
+ dev_err(port->dev, "trying to free unused MSI%lu\n", d->hwirq);
+
+ mutex_unlock(&msi->lock);
+}
+
+static const struct irq_domain_ops msi_domain_ops = {
+ .alloc = plda_irq_msi_domain_alloc,
+ .free = plda_irq_msi_domain_free,
+};
+
+static struct irq_chip plda_msi_irq_chip = {
+ .name = "PLDA PCIe MSI",
+ .irq_ack = irq_chip_ack_parent,
+ .irq_mask = pci_msi_mask_irq,
+ .irq_unmask = pci_msi_unmask_irq,
+};
+
+static struct msi_domain_info plda_msi_domain_info = {
+ .flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
+ MSI_FLAG_PCI_MSIX),
+ .chip = &plda_msi_irq_chip,
+};
+
+static int plda_allocate_msi_domains(struct plda_pcie_rp *port)
+{
+ struct device *dev = port->dev;
+ struct fwnode_handle *fwnode = of_node_to_fwnode(dev->of_node);
+ struct plda_msi *msi = &port->msi;
+
+ mutex_init(&port->msi.lock);
+
+ msi->dev_domain = irq_domain_add_linear(NULL, msi->num_vectors,
+ &msi_domain_ops, port);
+ if (!msi->dev_domain) {
+ dev_err(dev, "failed to create IRQ domain\n");
+ return -ENOMEM;
+ }
+
+ msi->msi_domain = pci_msi_create_irq_domain(fwnode,
+ &plda_msi_domain_info,
+ msi->dev_domain);
+ if (!msi->msi_domain) {
+ dev_err(dev, "failed to create MSI domain\n");
+ irq_domain_remove(msi->dev_domain);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static void plda_handle_intx(struct irq_desc *desc)
+{
+ struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ struct device *dev = port->dev;
+ void __iomem *bridge_base_addr = port->bridge_addr;
+ unsigned long status;
+ u32 bit;
+ int ret;
+
+ chained_irq_enter(chip, desc);
+
+ status = readl_relaxed(bridge_base_addr + ISTATUS_LOCAL);
+ if (status & PM_MSI_INT_INTX_MASK) {
+ status &= PM_MSI_INT_INTX_MASK;
+ status >>= PM_MSI_INT_INTX_SHIFT;
+ for_each_set_bit(bit, &status, PCI_NUM_INTX) {
+ ret = generic_handle_domain_irq(port->intx_domain, bit);
+ if (ret)
+ dev_err_ratelimited(dev, "bad INTx IRQ %d\n",
+ bit);
+ }
+ }
+
+ chained_irq_exit(chip, desc);
+}
+
+static void plda_ack_intx_irq(struct irq_data *data)
+{
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
+ void __iomem *bridge_base_addr = port->bridge_addr;
+ u32 mask = BIT(data->hwirq + PM_MSI_INT_INTX_SHIFT);
+
+ writel_relaxed(mask, bridge_base_addr + ISTATUS_LOCAL);
+}
+
+static void plda_mask_intx_irq(struct irq_data *data)
+{
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
+ void __iomem *bridge_base_addr = port->bridge_addr;
+ unsigned long flags;
+ u32 mask = BIT(data->hwirq + PM_MSI_INT_INTX_SHIFT);
+ u32 val;
+
+ raw_spin_lock_irqsave(&port->lock, flags);
+ val = readl_relaxed(bridge_base_addr + IMASK_LOCAL);
+ val &= ~mask;
+ writel_relaxed(val, bridge_base_addr + IMASK_LOCAL);
+ raw_spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void plda_unmask_intx_irq(struct irq_data *data)
+{
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
+ void __iomem *bridge_base_addr = port->bridge_addr;
+ unsigned long flags;
+ u32 mask = BIT(data->hwirq + PM_MSI_INT_INTX_SHIFT);
+ u32 val;
+
+ raw_spin_lock_irqsave(&port->lock, flags);
+ val = readl_relaxed(bridge_base_addr + IMASK_LOCAL);
+ val |= mask;
+ writel_relaxed(val, bridge_base_addr + IMASK_LOCAL);
+ raw_spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static struct irq_chip plda_intx_irq_chip = {
+ .name = "PLDA PCIe INTx",
+ .irq_ack = plda_ack_intx_irq,
+ .irq_mask = plda_mask_intx_irq,
+ .irq_unmask = plda_unmask_intx_irq,
+};
+
+static int plda_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
+ irq_hw_number_t hwirq)
+{
+ irq_set_chip_and_handler(irq, &plda_intx_irq_chip, handle_level_irq);
+ irq_set_chip_data(irq, domain->host_data);
+
+ return 0;
+}
+
+static const struct irq_domain_ops intx_domain_ops = {
+ .map = plda_pcie_intx_map,
+};
+
+static u32 plda_get_events(struct plda_pcie_rp *port)
+{
+ u32 events, val, origin;
+
+ origin = readl_relaxed(port->bridge_addr + ISTATUS_LOCAL);
+
+ /* MSI event and sys events */
+ val = (origin & SYS_AND_MSI_MASK) >> PM_MSI_INT_MSI_SHIFT;
+ events = val << (PM_MSI_INT_MSI_SHIFT - PCI_NUM_INTX + 1);
+
+ /* INTx events */
+ if (origin & PM_MSI_INT_INTX_MASK)
+ events |= BIT(PM_MSI_INT_INTX_SHIFT);
+
+ /* remains are same with register */
+ events |= origin & GENMASK(P_ATR_EVT_DOORBELL_SHIFT, 0);
+
+ return events;
+}
+
+static irqreturn_t plda_event_handler(int irq, void *dev_id)
+{
+ return IRQ_HANDLED;
+}
+
+static void plda_handle_event(struct irq_desc *desc)
+{
+ struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
+ unsigned long events;
+ u32 bit;
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+
+ chained_irq_enter(chip, desc);
+
+ events = port->event_ops->get_events(port);
+
+ for_each_set_bit(bit, &events, port->num_events)
+ generic_handle_domain_irq(port->event_domain, bit);
+
+ chained_irq_exit(chip, desc);
+}
+
+static u32 plda_hwirq_to_mask(int hwirq)
+{
+ u32 mask;
+
+ /* hwirq 23 - 0 are the same with register */
+ if (hwirq < EVENT_PM_MSI_INT_INTX)
+ mask = BIT(hwirq);
+ else if (hwirq == EVENT_PM_MSI_INT_INTX)
+ mask = PM_MSI_INT_INTX_MASK;
+ else
+ mask = BIT(hwirq + PCI_NUM_INTX - 1);
+
+ return mask;
+}
+
+static void plda_ack_event_irq(struct irq_data *data)
+{
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
+
+ writel_relaxed(plda_hwirq_to_mask(data->hwirq),
+ port->bridge_addr + ISTATUS_LOCAL);
+}
+
+static void plda_mask_event_irq(struct irq_data *data)
+{
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
+ u32 mask, val;
+
+ mask = plda_hwirq_to_mask(data->hwirq);
+
+ raw_spin_lock(&port->lock);
+ val = readl_relaxed(port->bridge_addr + IMASK_LOCAL);
+ val &= ~mask;
+ writel_relaxed(val, port->bridge_addr + IMASK_LOCAL);
+ raw_spin_unlock(&port->lock);
+}
+
+static void plda_unmask_event_irq(struct irq_data *data)
+{
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
+ u32 mask, val;
+
+ mask = plda_hwirq_to_mask(data->hwirq);
+
+ raw_spin_lock(&port->lock);
+ val = readl_relaxed(port->bridge_addr + IMASK_LOCAL);
+ val |= mask;
+ writel_relaxed(val, port->bridge_addr + IMASK_LOCAL);
+ raw_spin_unlock(&port->lock);
+}
+
+static struct irq_chip plda_event_irq_chip = {
+ .name = "PLDA PCIe EVENT",
+ .irq_ack = plda_ack_event_irq,
+ .irq_mask = plda_mask_event_irq,
+ .irq_unmask = plda_unmask_event_irq,
+};
+
+static const struct plda_event_ops plda_event_ops = {
+ .get_events = plda_get_events,
+};
+
+static int plda_pcie_event_map(struct irq_domain *domain, unsigned int irq,
+ irq_hw_number_t hwirq)
+{
+ struct plda_pcie_rp *port = (void *)domain->host_data;
+
+ irq_set_chip_and_handler(irq, port->event_irq_chip, handle_level_irq);
+ irq_set_chip_data(irq, domain->host_data);
+
+ return 0;
+}
+
+static const struct irq_domain_ops plda_event_domain_ops = {
+ .map = plda_pcie_event_map,
+};
+
+static int plda_pcie_init_irq_domains(struct plda_pcie_rp *port)
+{
+ struct device *dev = port->dev;
+ struct device_node *node = dev->of_node;
+ struct device_node *pcie_intc_node;
+
+ /* Setup INTx */
+ pcie_intc_node = of_get_next_child(node, NULL);
+ if (!pcie_intc_node) {
+ dev_err(dev, "failed to find PCIe Intc node\n");
+ return -EINVAL;
+ }
+
+ port->event_domain = irq_domain_add_linear(pcie_intc_node,
+ port->num_events,
+ &plda_event_domain_ops,
+ port);
+ if (!port->event_domain) {
+ dev_err(dev, "failed to get event domain\n");
+ of_node_put(pcie_intc_node);
+ return -ENOMEM;
+ }
+
+ irq_domain_update_bus_token(port->event_domain, DOMAIN_BUS_NEXUS);
+
+ port->intx_domain = irq_domain_add_linear(pcie_intc_node, PCI_NUM_INTX,
+ &intx_domain_ops, port);
+ if (!port->intx_domain) {
+ dev_err(dev, "failed to get an INTx IRQ domain\n");
+ of_node_put(pcie_intc_node);
+ return -ENOMEM;
+ }
+
+ irq_domain_update_bus_token(port->intx_domain, DOMAIN_BUS_WIRED);
+
+ of_node_put(pcie_intc_node);
+ raw_spin_lock_init(&port->lock);
+
+ return plda_allocate_msi_domains(port);
+}
+
+int plda_init_interrupts(struct platform_device *pdev,
+ struct plda_pcie_rp *port,
+ const struct plda_event *event)
+{
+ struct device *dev = &pdev->dev;
+ int irq;
+ int i, intx_irq, msi_irq, event_irq;
+ int ret;
+
+ if (!port->event_ops)
+ port->event_ops = &plda_event_ops;
+
+ if (!port->event_irq_chip)
+ port->event_irq_chip = &plda_event_irq_chip;
+
+ ret = plda_pcie_init_irq_domains(port);
+ if (ret) {
+ dev_err(dev, "failed creating IRQ domains\n");
+ return ret;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return -ENODEV;
+
+ for (i = 0; i < port->num_events; i++) {
+ event_irq = irq_create_mapping(port->event_domain, i);
+ if (!event_irq) {
+ dev_err(dev, "failed to map hwirq %d\n", i);
+ return -ENXIO;
+ }
+
+ if (event->request_event_irq)
+ ret = event->request_event_irq(port, event_irq, i);
+ else
+ ret = devm_request_irq(dev, event_irq,
+ plda_event_handler,
+ 0, NULL, port);
+
+ if (ret) {
+ dev_err(dev, "failed to request IRQ %d\n", event_irq);
+ return ret;
+ }
+ }
+
+ intx_irq = irq_create_mapping(port->event_domain,
+ event->intx_event);
+ if (!intx_irq) {
+ dev_err(dev, "failed to map INTx interrupt\n");
+ return -ENXIO;
+ }
+
+ /* Plug the INTx chained handler */
+ irq_set_chained_handler_and_data(intx_irq, plda_handle_intx, port);
+
+ msi_irq = irq_create_mapping(port->event_domain,
+ event->msi_event);
+ if (!msi_irq)
+ return -ENXIO;
+
+ /* Plug the MSI chained handler */
+ irq_set_chained_handler_and_data(msi_irq, plda_handle_msi, port);
+
+ /* Plug the main event chained handler */
+ irq_set_chained_handler_and_data(irq, plda_handle_event, port);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(plda_init_interrupts);
+
void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
phys_addr_t axi_addr, phys_addr_t pci_addr,
size_t size)
diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
index 0e5157eb3a32..eb9e6f304985 100644
--- a/drivers/pci/controller/plda/pcie-plda.h
+++ b/drivers/pci/controller/plda/pcie-plda.h
@@ -170,6 +170,9 @@ struct plda_event {
int msi_event;
};
+int plda_init_interrupts(struct platform_device *pdev,
+ struct plda_pcie_rp *port,
+ const struct plda_event *event);
void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
phys_addr_t axi_addr, phys_addr_t pci_addr,
size_t size);
--
2.17.1
Add PLDA host plda_pcie_host_init()/plda_pcie_host_deinit() and map bus
function. So vendor can use it to init PLDA PCIe host core.
Signed-off-by: Minda Chen <[email protected]>
Reviewed-by: Mason Huo <[email protected]>
---
drivers/pci/controller/plda/pcie-plda-host.c | 131 +++++++++++++++++--
drivers/pci/controller/plda/pcie-plda.h | 22 ++++
2 files changed, 139 insertions(+), 14 deletions(-)
diff --git a/drivers/pci/controller/plda/pcie-plda-host.c b/drivers/pci/controller/plda/pcie-plda-host.c
index a040e7e5492f..a18923d7cea6 100644
--- a/drivers/pci/controller/plda/pcie-plda-host.c
+++ b/drivers/pci/controller/plda/pcie-plda-host.c
@@ -3,6 +3,7 @@
* PLDA PCIe XpressRich host controller driver
*
* Copyright (C) 2023 Microchip Co. Ltd
+ * StarFive Co. Ltd
*
* Author: Daire McNamara <[email protected]>
*/
@@ -15,6 +16,15 @@
#include "pcie-plda.h"
+void __iomem *plda_pcie_map_bus(struct pci_bus *bus, unsigned int devfn,
+ int where)
+{
+ struct plda_pcie_rp *pcie = bus->sysdata;
+
+ return pcie->config_base + PCIE_ECAM_OFFSET(bus->number, devfn, where);
+}
+EXPORT_SYMBOL_GPL(plda_pcie_map_bus);
+
static void plda_handle_msi(struct irq_desc *desc)
{
struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
@@ -420,9 +430,7 @@ int plda_init_interrupts(struct platform_device *pdev,
const struct plda_event *event)
{
struct device *dev = &pdev->dev;
- int irq;
- int intx_irq, msi_irq, event_irq;
- int ret;
+ int event_irq, ret;
u32 i;
if (!port->event_ops)
@@ -437,8 +445,8 @@ int plda_init_interrupts(struct platform_device *pdev,
return ret;
}
- irq = platform_get_irq(pdev, 0);
- if (irq < 0)
+ port->irq = platform_get_irq(pdev, 0);
+ if (port->irq < 0)
return -ENODEV;
for_each_set_bit(i, &port->events_bitmap, port->num_events) {
@@ -461,26 +469,26 @@ int plda_init_interrupts(struct platform_device *pdev,
}
}
- intx_irq = irq_create_mapping(port->event_domain,
- event->intx_event);
- if (!intx_irq) {
+ port->intx_irq = irq_create_mapping(port->event_domain,
+ event->intx_event);
+ if (!port->intx_irq) {
dev_err(dev, "failed to map INTx interrupt\n");
return -ENXIO;
}
/* Plug the INTx chained handler */
- irq_set_chained_handler_and_data(intx_irq, plda_handle_intx, port);
+ irq_set_chained_handler_and_data(port->intx_irq, plda_handle_intx, port);
- msi_irq = irq_create_mapping(port->event_domain,
- event->msi_event);
- if (!msi_irq)
+ port->msi_irq = irq_create_mapping(port->event_domain,
+ event->msi_event);
+ if (!port->msi_irq)
return -ENXIO;
/* Plug the MSI chained handler */
- irq_set_chained_handler_and_data(msi_irq, plda_handle_msi, port);
+ irq_set_chained_handler_and_data(port->msi_irq, plda_handle_msi, port);
/* Plug the main event chained handler */
- irq_set_chained_handler_and_data(irq, plda_handle_event, port);
+ irq_set_chained_handler_and_data(port->irq, plda_handle_event, port);
return 0;
}
@@ -546,3 +554,98 @@ int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
return 0;
}
EXPORT_SYMBOL_GPL(plda_pcie_setup_iomems);
+
+static void plda_pcie_irq_domain_deinit(struct plda_pcie_rp *pcie)
+{
+ irq_set_chained_handler_and_data(pcie->irq, NULL, NULL);
+ irq_set_chained_handler_and_data(pcie->msi_irq, NULL, NULL);
+ irq_set_chained_handler_and_data(pcie->intx_irq, NULL, NULL);
+
+ irq_domain_remove(pcie->msi.msi_domain);
+ irq_domain_remove(pcie->msi.dev_domain);
+
+ irq_domain_remove(pcie->intx_domain);
+ irq_domain_remove(pcie->event_domain);
+}
+
+int plda_pcie_host_init(struct plda_pcie_rp *port, struct pci_ops *ops,
+ const struct plda_event *plda_event)
+{
+ struct device *dev = port->dev;
+ struct pci_host_bridge *bridge;
+ struct platform_device *pdev = to_platform_device(dev);
+ struct resource *cfg_res;
+ int ret;
+
+ pdev = to_platform_device(dev);
+
+ port->bridge_addr =
+ devm_platform_ioremap_resource_byname(pdev, "apb");
+
+ if (IS_ERR(port->bridge_addr))
+ return dev_err_probe(dev, PTR_ERR(port->bridge_addr),
+ "failed to map reg memory\n");
+
+ cfg_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg");
+ if (!cfg_res)
+ return dev_err_probe(dev, -ENODEV,
+ "failed to get config memory\n");
+
+ port->config_base = devm_ioremap_resource(dev, cfg_res);
+ if (IS_ERR(port->config_base))
+ return dev_err_probe(dev, PTR_ERR(port->config_base),
+ "failed to map config memory\n");
+
+ bridge = devm_pci_alloc_host_bridge(dev, 0);
+ if (!bridge)
+ return dev_err_probe(dev, -ENOMEM,
+ "failed to alloc bridge\n");
+
+ if (port->host_ops && port->host_ops->host_init) {
+ ret = port->host_ops->host_init(port);
+ if (ret)
+ return ret;
+ }
+
+ port->bridge = bridge;
+ plda_pcie_setup_window(port->bridge_addr, 0, cfg_res->start, 0,
+ resource_size(cfg_res));
+ plda_pcie_setup_iomems(bridge, port);
+ plda_set_default_msi(&port->msi);
+ ret = plda_init_interrupts(pdev, port, plda_event);
+ if (ret)
+ goto err_host;
+
+ /* Set default bus ops */
+ bridge->ops = ops;
+ bridge->sysdata = port;
+
+ ret = pci_host_probe(bridge);
+ if (ret < 0) {
+ dev_err_probe(dev, ret, "failed to probe pci host\n");
+ goto err_probe;
+ }
+
+ return ret;
+
+err_probe:
+ plda_pcie_irq_domain_deinit(port);
+err_host:
+ if (port->host_ops && port->host_ops->host_deinit)
+ port->host_ops->host_deinit(port);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(plda_pcie_host_init);
+
+void plda_pcie_host_deinit(struct plda_pcie_rp *port)
+{
+ pci_stop_root_bus(port->bridge->bus);
+ pci_remove_root_bus(port->bridge->bus);
+
+ plda_pcie_irq_domain_deinit(port);
+
+ if (port->host_ops && port->host_ops->host_deinit)
+ port->host_ops->host_deinit(port);
+}
+EXPORT_SYMBOL_GPL(plda_pcie_host_deinit);
diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
index c3d8c141e44d..52f4cacf7917 100644
--- a/drivers/pci/controller/plda/pcie-plda.h
+++ b/drivers/pci/controller/plda/pcie-plda.h
@@ -142,6 +142,11 @@ struct plda_event_ops {
u32 (*get_events)(struct plda_pcie_rp *pcie);
};
+struct plda_pcie_host_ops {
+ int (*host_init)(struct plda_pcie_rp *pcie);
+ void (*host_deinit)(struct plda_pcie_rp *pcie);
+};
+
struct plda_msi {
struct mutex lock; /* Protect used bitmap */
struct irq_domain *msi_domain;
@@ -153,14 +158,20 @@ struct plda_msi {
struct plda_pcie_rp {
struct device *dev;
+ struct pci_host_bridge *bridge;
struct irq_domain *intx_domain;
struct irq_domain *event_domain;
raw_spinlock_t lock;
struct plda_msi msi;
const struct plda_event_ops *event_ops;
const struct irq_chip *event_irq_chip;
+ const struct plda_pcie_host_ops *host_ops;
void __iomem *bridge_addr;
+ void __iomem *config_base;
unsigned long events_bitmap;
+ int irq;
+ int msi_irq;
+ int intx_irq;
int num_events;
};
@@ -171,6 +182,8 @@ struct plda_event {
int msi_event;
};
+void __iomem *plda_pcie_map_bus(struct pci_bus *bus, unsigned int devfn,
+ int where);
int plda_init_interrupts(struct platform_device *pdev,
struct plda_pcie_rp *port,
const struct plda_event *event);
@@ -179,4 +192,13 @@ void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
size_t size);
int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
struct plda_pcie_rp *port);
+int plda_pcie_host_init(struct plda_pcie_rp *port, struct pci_ops *ops,
+ const struct plda_event *plda_event);
+void plda_pcie_host_deinit(struct plda_pcie_rp *pcie);
+
+static inline void plda_set_default_msi(struct plda_msi *msi)
+{
+ msi->vector_phy = IMSI_ADDR;
+ msi->num_vectors = PLDA_MAX_NUM_MSI_IRQS;
+}
#endif
--
2.17.1
Add StarFive JH7110 SoC PCIe controller platform driver code, JH7110
with PLDA host PCIe core.
Signed-off-by: Minda Chen <[email protected]>
Co-developed-by: Kevin Xie <[email protected]>
Reviewed-by: Mason Huo <[email protected]>
---
MAINTAINERS | 1 +
drivers/pci/controller/plda/Kconfig | 12 +
drivers/pci/controller/plda/Makefile | 1 +
drivers/pci/controller/plda/pcie-plda.h | 71 ++-
drivers/pci/controller/plda/pcie-starfive.c | 488 ++++++++++++++++++++
5 files changed, 572 insertions(+), 1 deletion(-)
create mode 100644 drivers/pci/controller/plda/pcie-starfive.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 3772f6893818..de85d6d1b92c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -17220,6 +17220,7 @@ M: Kevin Xie <[email protected]>
L: [email protected]
S: Maintained
F: Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
+F: drivers/pci/controller/plda/pcie-starfive.c
PCIE ENDPOINT DRIVER FOR QUALCOMM
M: Manivannan Sadhasivam <[email protected]>
diff --git a/drivers/pci/controller/plda/Kconfig b/drivers/pci/controller/plda/Kconfig
index e54a82ee94f5..c0e14146d7e4 100644
--- a/drivers/pci/controller/plda/Kconfig
+++ b/drivers/pci/controller/plda/Kconfig
@@ -15,4 +15,16 @@ config PCIE_MICROCHIP_HOST
Say Y here if you want kernel to support the Microchip AXI PCIe
Host Bridge driver.
+config PCIE_STARFIVE_HOST
+ tristate "StarFive PCIe host controller"
+ depends on PCI_MSI && OF
+ depends on ARCH_STARFIVE || COMPILE_TEST
+ select PCIE_PLDA_HOST
+ help
+ Say Y here if you want to support the StarFive PCIe controller in
+ host mode. StarFive PCIe controller uses PLDA PCIe core.
+
+ If you choose to build this driver as module it will be dynamically
+ linked and module will be called pcie-starfive.ko.
+
endmenu
diff --git a/drivers/pci/controller/plda/Makefile b/drivers/pci/controller/plda/Makefile
index 4340ab007f44..0ac6851bed48 100644
--- a/drivers/pci/controller/plda/Makefile
+++ b/drivers/pci/controller/plda/Makefile
@@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_PCIE_PLDA_HOST) += pcie-plda-host.o
obj-$(CONFIG_PCIE_MICROCHIP_HOST) += pcie-microchip-host.o
+obj-$(CONFIG_PCIE_STARFIVE_HOST) += pcie-starfive.o
diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
index 52f4cacf7917..0e7dc0d8e5ba 100644
--- a/drivers/pci/controller/plda/pcie-plda.h
+++ b/drivers/pci/controller/plda/pcie-plda.h
@@ -10,10 +10,20 @@
#define PLDA_MAX_NUM_MSI_IRQS 32
/* PCIe Bridge Phy Regs */
+#define GEN_SETTINGS 0x80
+#define RP_ENABLE 1
+#define PCIE_PCI_IDS_DW1 0x9c
+#define IDS_CLASS_CODE_SHIFT 16
+#define REVISION_ID_MASK GENMASK(7, 0)
+#define CLASS_CODE_ID_MASK GENMASK(31, 8)
#define PCIE_PCI_IRQ_DW0 0xa8
#define MSIX_CAP_MASK BIT(31)
#define NUM_MSI_MSGS_MASK GENMASK(6, 4)
#define NUM_MSI_MSGS_SHIFT 4
+#define PCI_MISC 0xb4
+#define PHY_FUNCTION_DIS BIT(15)
+#define PCIE_WINROM 0xfc
+#define PREF_MEM_WIN_64_SUPPORT BIT(3)
#define IMASK_LOCAL 0x180
#define DMA_END_ENGINE_0_MASK 0x00000000u
@@ -65,6 +75,8 @@
#define ISTATUS_HOST 0x18c
#define IMSI_ADDR 0x190
#define ISTATUS_MSI 0x194
+#define PMSG_SUPPORT_RX 0x3f0
+#define PMSG_LTR_SUPPORT BIT(2)
/* PCIe Master table init defines */
#define ATR0_PCIE_WIN0_SRCADDR_PARAM 0x600u
@@ -86,6 +98,8 @@
#define PCIE_TX_RX_INTERFACE 0x00000000u
#define PCIE_CONFIG_INTERFACE 0x00000001u
+#define CONFIG_SPACE_ADDR_OFFSET 0x1000u
+
#define ATR_ENTRY_SIZE 32
enum plda_int_event {
@@ -201,4 +215,59 @@ static inline void plda_set_default_msi(struct plda_msi *msi)
msi->vector_phy = IMSI_ADDR;
msi->num_vectors = PLDA_MAX_NUM_MSI_IRQS;
}
-#endif
+
+static inline void plda_pcie_enable_root_port(struct plda_pcie_rp *plda)
+{
+ u32 value;
+
+ value = readl_relaxed(plda->bridge_addr + GEN_SETTINGS);
+ value |= RP_ENABLE;
+ writel_relaxed(value, plda->bridge_addr + GEN_SETTINGS);
+}
+
+static inline void plda_pcie_set_standard_class(struct plda_pcie_rp *plda)
+{
+ u32 value;
+
+ /* set class code and reserve revision id */
+ value = readl_relaxed(plda->bridge_addr + PCIE_PCI_IDS_DW1);
+ value &= REVISION_ID_MASK;
+ value |= (PCI_CLASS_BRIDGE_PCI << IDS_CLASS_CODE_SHIFT);
+ writel_relaxed(value, plda->bridge_addr + PCIE_PCI_IDS_DW1);
+}
+
+static inline void plda_pcie_set_pref_win_64bit(struct plda_pcie_rp *plda)
+{
+ u32 value;
+
+ value = readl_relaxed(plda->bridge_addr + PCIE_WINROM);
+ value |= PREF_MEM_WIN_64_SUPPORT;
+ writel_relaxed(value, plda->bridge_addr + PCIE_WINROM);
+}
+
+static inline void plda_pcie_disable_ltr(struct plda_pcie_rp *plda)
+{
+ u32 value;
+
+ value = readl_relaxed(plda->bridge_addr + PMSG_SUPPORT_RX);
+ value &= ~PMSG_LTR_SUPPORT;
+ writel_relaxed(value, plda->bridge_addr + PMSG_SUPPORT_RX);
+}
+
+static inline void plda_pcie_disable_func(struct plda_pcie_rp *plda)
+{
+ u32 value;
+
+ value = readl_relaxed(plda->bridge_addr + PCI_MISC);
+ value |= PHY_FUNCTION_DIS;
+ writel_relaxed(value, plda->bridge_addr + PCI_MISC);
+}
+
+static inline void plda_pcie_write_rc_bar(struct plda_pcie_rp *plda, u64 val)
+{
+ void __iomem *addr = plda->bridge_addr + CONFIG_SPACE_ADDR_OFFSET;
+
+ writel_relaxed(lower_32_bits(val), addr + PCI_BASE_ADDRESS_0);
+ writel_relaxed(upper_32_bits(val), addr + PCI_BASE_ADDRESS_1);
+}
+#endif /* _PCIE_PLDA_H */
diff --git a/drivers/pci/controller/plda/pcie-starfive.c b/drivers/pci/controller/plda/pcie-starfive.c
new file mode 100644
index 000000000000..c9933ecf6833
--- /dev/null
+++ b/drivers/pci/controller/plda/pcie-starfive.c
@@ -0,0 +1,488 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * PCIe host controller driver for StarFive JH7110 Soc.
+ *
+ * Copyright (C) 2023 StarFive Technology Co., Ltd.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_pci.h>
+#include <linux/pci.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include "../../pci.h"
+
+#include "pcie-plda.h"
+
+#define PCIE_FUNC_NUM 4
+
+/* system control */
+#define STG_SYSCON_PCIE0_BASE 0x48
+#define STG_SYSCON_PCIE1_BASE 0x1f8
+
+#define STG_SYSCON_AR_OFFSET 0x78
+#define STG_SYSCON_AXI4_SLVL_AR_MASK GENMASK(22, 8)
+#define STG_SYSCON_AXI4_SLVL_PHY_AR(x) FIELD_PREP(GENMASK(20, 17), x)
+#define STG_SYSCON_AW_OFFSET 0x7c
+#define STG_SYSCON_AXI4_SLVL_AW_MASK GENMASK(14, 0)
+#define STG_SYSCON_AXI4_SLVL_PHY_AW(x) FIELD_PREP(GENMASK(12, 9), x)
+#define STG_SYSCON_CLKREQ BIT(22)
+#define STG_SYSCON_CKREF_SRC_MASK GENMASK(19, 18)
+#define STG_SYSCON_RP_NEP_OFFSET 0xe8
+#define STG_SYSCON_K_RP_NEP BIT(8)
+#define STG_SYSCON_LNKSTA_OFFSET 0x170
+#define DATA_LINK_ACTIVE BIT(5)
+
+/* Parameters for the waiting for link up routine */
+#define LINK_WAIT_MAX_RETRIES 10
+#define LINK_WAIT_USLEEP_MIN 90000
+#define LINK_WAIT_USLEEP_MAX 100000
+
+struct starfive_jh7110_pcie {
+ struct plda_pcie_rp plda;
+ struct reset_control *resets;
+ struct clk_bulk_data *clks;
+ struct regmap *reg_syscon;
+ struct gpio_desc *power_gpio;
+ struct gpio_desc *reset_gpio;
+ struct phy *phy;
+
+ unsigned int stg_pcie_base;
+ int num_clks;
+};
+
+/*
+ * JH7110 PCIe port BAR0/1 can be configured as 64-bit prefetchable memory
+ * space. PCIe read and write requests targeting BAR0/1 are routed to so called
+ * 'Bridge Configuration space' in PLDA IP datasheet, which contains the bridge
+ * internal registers, such as interrupt, DMA and ATU registers...
+ * JH7110 can access the Bridge Configuration space by local bus, and don`t
+ * want the bridge internal registers accessed by the DMA from EP devices.
+ * Thus, they are unimplemented and should be hidden here.
+ */
+static bool starfive_pcie_hide_rc_bar(struct pci_bus *bus, unsigned int devfn,
+ int offset)
+{
+ if (pci_is_root_bus(bus) && !devfn &&
+ (offset == PCI_BASE_ADDRESS_0 || offset == PCI_BASE_ADDRESS_1))
+ return true;
+
+ return false;
+}
+
+static int starfive_pcie_config_write(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 value)
+{
+ if (starfive_pcie_hide_rc_bar(bus, devfn, where))
+ return PCIBIOS_SUCCESSFUL;
+
+ return pci_generic_config_write(bus, devfn, where, size, value);
+}
+
+static int starfive_pcie_config_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *value)
+{
+ if (starfive_pcie_hide_rc_bar(bus, devfn, where)) {
+ *value = 0;
+ return PCIBIOS_SUCCESSFUL;
+ }
+
+ return pci_generic_config_read(bus, devfn, where, size, value);
+}
+
+static int starfive_pcie_parse_dt(struct starfive_jh7110_pcie *pcie,
+ struct device *dev)
+{
+ int domain_nr;
+
+ pcie->num_clks = devm_clk_bulk_get_all(dev, &pcie->clks);
+ if (pcie->num_clks < 0)
+ return dev_err_probe(dev, pcie->num_clks,
+ "failed to get pcie clocks\n");
+
+ pcie->resets = devm_reset_control_array_get_exclusive(dev);
+ if (IS_ERR(pcie->resets))
+ return dev_err_probe(dev, PTR_ERR(pcie->resets),
+ "failed to get pcie resets");
+
+ pcie->reg_syscon =
+ syscon_regmap_lookup_by_phandle(dev->of_node,
+ "starfive,stg-syscon");
+
+ if (IS_ERR(pcie->reg_syscon))
+ return dev_err_probe(dev, PTR_ERR(pcie->reg_syscon),
+ "failed to parse starfive,stg-syscon\n");
+
+ pcie->phy = devm_phy_optional_get(dev, NULL);
+ if (IS_ERR(pcie->phy))
+ return dev_err_probe(dev, PTR_ERR(pcie->phy),
+ "failed to get pcie phy\n");
+
+ /*
+ * The PCIe domain numbers are set to be static in JH7110 DTS.
+ * As the STG system controller defines different bases in PCIe RP0 &
+ * RP1, we use them to identify which controller is doing the hardware
+ * initialization.
+ */
+ domain_nr = of_get_pci_domain_nr(dev->of_node);
+
+ if (domain_nr < 0 || domain_nr > 1)
+ return dev_err_probe(dev, -ENODEV,
+ "failed to get valid pcie domain\n");
+
+ if (domain_nr == 0)
+ pcie->stg_pcie_base = STG_SYSCON_PCIE0_BASE;
+ else
+ pcie->stg_pcie_base = STG_SYSCON_PCIE1_BASE;
+
+ pcie->reset_gpio = devm_gpiod_get_optional(dev, "perst",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(pcie->reset_gpio))
+ return dev_err_probe(dev, PTR_ERR(pcie->reset_gpio),
+ "failed to get perst-gpio\n");
+
+ pcie->power_gpio = devm_gpiod_get_optional(dev, "enable",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(pcie->power_gpio))
+ return dev_err_probe(dev, PTR_ERR(pcie->power_gpio),
+ "failed to get power-gpio\n");
+
+ return 0;
+}
+
+static struct pci_ops starfive_pcie_ops = {
+ .map_bus = plda_pcie_map_bus,
+ .read = starfive_pcie_config_read,
+ .write = starfive_pcie_config_write,
+};
+
+static int starfive_pcie_clk_rst_init(struct starfive_jh7110_pcie *pcie)
+{
+ struct device *dev = pcie->plda.dev;
+ int ret;
+
+ ret = clk_bulk_prepare_enable(pcie->num_clks, pcie->clks);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to enable clocks\n");
+
+ ret = reset_control_deassert(pcie->resets);
+ if (ret) {
+ clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
+ dev_err_probe(dev, ret, "failed to deassert resets\n");
+ }
+
+ return ret;
+}
+
+static void starfive_pcie_clk_rst_deinit(struct starfive_jh7110_pcie *pcie)
+{
+ reset_control_assert(pcie->resets);
+ clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
+}
+
+static bool starfive_pcie_link_up(struct plda_pcie_rp *plda)
+{
+ struct starfive_jh7110_pcie *pcie =
+ container_of(plda, struct starfive_jh7110_pcie, plda);
+ int ret;
+ u32 stg_reg_val;
+
+ ret = regmap_read(pcie->reg_syscon,
+ pcie->stg_pcie_base + STG_SYSCON_LNKSTA_OFFSET,
+ &stg_reg_val);
+ if (ret) {
+ dev_err(pcie->plda.dev, "failed to read link status\n");
+ return false;
+ }
+
+ return !!(stg_reg_val & DATA_LINK_ACTIVE);
+}
+
+static int starfive_pcie_host_wait_for_link(struct starfive_jh7110_pcie *pcie)
+{
+ int retries;
+
+ /* Check if the link is up or not */
+ for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
+ if (starfive_pcie_link_up(&pcie->plda)) {
+ dev_info(pcie->plda.dev, "port link up\n");
+ return 0;
+ }
+ usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
+ }
+
+ return -ETIMEDOUT;
+}
+
+static int starfive_pcie_enable_phy(struct device *dev,
+ struct starfive_jh7110_pcie *pcie)
+{
+ int ret;
+
+ if (!pcie->phy)
+ return 0;
+
+ ret = phy_init(pcie->phy);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "failed to initialize pcie phy\n");
+
+ ret = phy_set_mode(pcie->phy, PHY_MODE_PCIE);
+ if (ret) {
+ dev_err_probe(dev, ret, "failed to set pcie mode\n");
+ goto err_phy_on;
+ }
+
+ ret = phy_power_on(pcie->phy);
+ if (ret) {
+ dev_err_probe(dev, ret, "failed to power on pcie phy\n");
+ goto err_phy_on;
+ }
+
+ return 0;
+
+err_phy_on:
+ phy_exit(pcie->phy);
+ return ret;
+}
+
+static void starfive_pcie_disable_phy(struct starfive_jh7110_pcie *pcie)
+{
+ phy_power_off(pcie->phy);
+ phy_exit(pcie->phy);
+}
+
+static void starfive_pcie_host_deinit(struct plda_pcie_rp *plda)
+{
+ struct starfive_jh7110_pcie *pcie =
+ container_of(plda, struct starfive_jh7110_pcie, plda);
+
+ starfive_pcie_clk_rst_deinit(pcie);
+ if (pcie->power_gpio)
+ gpiod_set_value_cansleep(pcie->power_gpio, 0);
+ starfive_pcie_disable_phy(pcie);
+}
+
+static int starfive_pcie_host_init(struct plda_pcie_rp *plda)
+{
+ struct starfive_jh7110_pcie *pcie =
+ container_of(plda, struct starfive_jh7110_pcie, plda);
+ struct device *dev = plda->dev;
+ int ret;
+ int i;
+
+ ret = starfive_pcie_enable_phy(dev, pcie);
+ if (ret)
+ return ret;
+
+ regmap_update_bits(pcie->reg_syscon,
+ pcie->stg_pcie_base + STG_SYSCON_RP_NEP_OFFSET,
+ STG_SYSCON_K_RP_NEP, STG_SYSCON_K_RP_NEP);
+
+ regmap_update_bits(pcie->reg_syscon,
+ pcie->stg_pcie_base + STG_SYSCON_AW_OFFSET,
+ STG_SYSCON_CKREF_SRC_MASK,
+ FIELD_PREP(STG_SYSCON_CKREF_SRC_MASK, 2));
+
+ regmap_update_bits(pcie->reg_syscon,
+ pcie->stg_pcie_base + STG_SYSCON_AW_OFFSET,
+ STG_SYSCON_CLKREQ, STG_SYSCON_CLKREQ);
+
+ ret = starfive_pcie_clk_rst_init(pcie);
+ if (ret)
+ return ret;
+
+ if (pcie->power_gpio)
+ gpiod_set_value_cansleep(pcie->power_gpio, 1);
+
+ if (pcie->reset_gpio)
+ gpiod_set_value_cansleep(pcie->reset_gpio, 1);
+
+ /* Disable physical functions except #0 */
+ for (i = 1; i < PCIE_FUNC_NUM; i++) {
+ regmap_update_bits(pcie->reg_syscon,
+ pcie->stg_pcie_base + STG_SYSCON_AR_OFFSET,
+ STG_SYSCON_AXI4_SLVL_AR_MASK,
+ STG_SYSCON_AXI4_SLVL_PHY_AR(i));
+
+ regmap_update_bits(pcie->reg_syscon,
+ pcie->stg_pcie_base + STG_SYSCON_AW_OFFSET,
+ STG_SYSCON_AXI4_SLVL_AW_MASK,
+ STG_SYSCON_AXI4_SLVL_PHY_AW(i));
+
+ plda_pcie_disable_func(plda);
+ }
+
+ regmap_update_bits(pcie->reg_syscon,
+ pcie->stg_pcie_base + STG_SYSCON_AR_OFFSET,
+ STG_SYSCON_AXI4_SLVL_AR_MASK, 0);
+ regmap_update_bits(pcie->reg_syscon,
+ pcie->stg_pcie_base + STG_SYSCON_AW_OFFSET,
+ STG_SYSCON_AXI4_SLVL_AW_MASK, 0);
+
+ plda_pcie_enable_root_port(plda);
+ plda_pcie_write_rc_bar(plda, 0);
+
+ /* PCIe PCI Standard Configuration Identification Settings. */
+ plda_pcie_set_standard_class(plda);
+
+ /*
+ * The LTR message receiving is enabled by the register "PCIe Message
+ * Reception" as default, but the forward id & addr are uninitialized.
+ * If we do not disable LTR message forwarding here, or set a legal
+ * forwarding address, the kernel will get stuck.
+ * To workaround, disable the LTR message forwarding here before using
+ * this feature.
+ */
+ plda_pcie_disable_ltr(plda);
+
+ /*
+ * Enable the prefetchable memory window 64-bit addressing in JH7110.
+ * The 64-bits prefetchable address translation configurations in ATU
+ * can be work after enable the register setting below.
+ */
+ plda_pcie_set_pref_win_64bit(plda);
+
+ /*
+ * Ensure that PERST has been asserted for at least 100 ms,
+ * the sleep value is T_PVPERL from PCIe CEM spec r2.0 (Table 2-4)
+ */
+ msleep(100);
+ if (pcie->reset_gpio)
+ gpiod_set_value_cansleep(pcie->reset_gpio, 0);
+
+ /*
+ * With a Downstream Port (<=5GT/s), software must wait a minimum
+ * of 100ms following exit from a conventional reset before
+ * sending a configuration request to the device.
+ */
+ msleep(PCIE_RESET_CONFIG_DEVICE_WAIT_MS);
+
+ if (starfive_pcie_host_wait_for_link(pcie))
+ dev_info(dev, "port link down\n");
+
+ return 0;
+}
+
+static const struct plda_pcie_host_ops sf_host_ops = {
+ .host_init = starfive_pcie_host_init,
+ .host_deinit = starfive_pcie_host_deinit,
+};
+
+static const struct plda_event stf_pcie_event = {
+ .intx_event = EVENT_PM_MSI_INT_INTX,
+ .msi_event = EVENT_PM_MSI_INT_MSI
+};
+
+static int starfive_pcie_probe(struct platform_device *pdev)
+{
+ struct starfive_jh7110_pcie *pcie;
+ struct device *dev = &pdev->dev;
+ struct plda_pcie_rp *plda;
+ int ret;
+
+ pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
+ if (!pcie)
+ return -ENOMEM;
+
+ plda = &pcie->plda;
+ plda->dev = dev;
+
+ ret = starfive_pcie_parse_dt(pcie, dev);
+ if (ret)
+ return ret;
+
+ plda->host_ops = &sf_host_ops;
+ plda->num_events = PLDA_MAX_EVENT_NUM;
+ /* mask doorbell event */
+ plda->events_bitmap = GENMASK(PLDA_INT_EVENT_NUM - 1, 0)
+ & ~BIT(PLDA_AXI_DOORBELL)
+ & ~BIT(PLDA_PCIE_DOORBELL);
+ plda->events_bitmap <<= PLDA_NUM_DMA_EVENTS;
+ ret = plda_pcie_host_init(&pcie->plda, &starfive_pcie_ops,
+ &stf_pcie_event);
+ if (ret)
+ return ret;
+
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_get_sync(&pdev->dev);
+ platform_set_drvdata(pdev, pcie);
+
+ return 0;
+}
+
+static void starfive_pcie_remove(struct platform_device *pdev)
+{
+ struct starfive_jh7110_pcie *pcie = platform_get_drvdata(pdev);
+
+ pm_runtime_put(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+ plda_pcie_host_deinit(&pcie->plda);
+ platform_set_drvdata(pdev, NULL);
+}
+
+static int starfive_pcie_suspend_noirq(struct device *dev)
+{
+ struct starfive_jh7110_pcie *pcie = dev_get_drvdata(dev);
+
+ clk_bulk_disable_unprepare(pcie->num_clks, pcie->clks);
+ starfive_pcie_disable_phy(pcie);
+
+ return 0;
+}
+
+static int starfive_pcie_resume_noirq(struct device *dev)
+{
+ struct starfive_jh7110_pcie *pcie = dev_get_drvdata(dev);
+ int ret;
+
+ ret = starfive_pcie_enable_phy(dev, pcie);
+ if (ret)
+ return ret;
+
+ ret = clk_bulk_prepare_enable(pcie->num_clks, pcie->clks);
+ if (ret) {
+ dev_err(dev, "failed to enable clocks\n");
+ starfive_pcie_disable_phy(pcie);
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct dev_pm_ops starfive_pcie_pm_ops = {
+ NOIRQ_SYSTEM_SLEEP_PM_OPS(starfive_pcie_suspend_noirq,
+ starfive_pcie_resume_noirq)
+};
+
+static const struct of_device_id starfive_pcie_of_match[] = {
+ { .compatible = "starfive,jh7110-pcie", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, starfive_pcie_of_match);
+
+static struct platform_driver starfive_pcie_driver = {
+ .driver = {
+ .name = "pcie-starfive",
+ .of_match_table = of_match_ptr(starfive_pcie_of_match),
+ .pm = pm_sleep_ptr(&starfive_pcie_pm_ops),
+ },
+ .probe = starfive_pcie_probe,
+ .remove_new = starfive_pcie_remove,
+};
+module_platform_driver(starfive_pcie_driver);
+
+MODULE_DESCRIPTION("StarFive JH7110 PCIe host driver");
+MODULE_LICENSE("GPL v2");
--
2.17.1
Add PCIe dts configuraion for JH7110 SoC platform.
Signed-off-by: Minda Chen <[email protected]>
Reviewed-by: Hal Feng <[email protected]>
Signed-off-by: Minda Chen <[email protected]>
---
.../jh7110-starfive-visionfive-2.dtsi | 64 ++++++++++++++
arch/riscv/boot/dts/starfive/jh7110.dtsi | 86 +++++++++++++++++++
2 files changed, 150 insertions(+)
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
index 45b58b6f3df8..de95e330a93c 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -330,6 +330,22 @@
status = "okay";
};
+&pcie0 {
+ perst-gpios = <&sysgpio 26 GPIO_ACTIVE_LOW>;
+ phys = <&pciephy0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie0_pins>;
+ status = "okay";
+};
+
+&pcie1 {
+ perst-gpios = <&sysgpio 28 GPIO_ACTIVE_LOW>;
+ phys = <&pciephy1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie1_pins>;
+ status = "okay";
+};
+
&pwmdac {
pinctrl-names = "default";
pinctrl-0 = <&pwmdac_pins>;
@@ -552,6 +568,54 @@
};
};
+ pcie0_pins: pcie0-0 {
+ clkreq-pins {
+ pinmux = <GPIOMUX(27, GPOUT_LOW,
+ GPOEN_DISABLE,
+ GPI_NONE)>;
+ bias-pull-down;
+ drive-strength = <2>;
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+
+ wake-pins {
+ pinmux = <GPIOMUX(32, GPOUT_LOW,
+ GPOEN_DISABLE,
+ GPI_NONE)>;
+ bias-pull-up;
+ drive-strength = <2>;
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+ };
+
+ pcie1_pins: pcie1-0 {
+ clkreq-pins {
+ pinmux = <GPIOMUX(29, GPOUT_LOW,
+ GPOEN_DISABLE,
+ GPI_NONE)>;
+ bias-pull-down;
+ drive-strength = <2>;
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+
+ wake-pins {
+ pinmux = <GPIOMUX(21, GPOUT_LOW,
+ GPOEN_DISABLE,
+ GPI_NONE)>;
+ bias-pull-up;
+ drive-strength = <2>;
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+ };
+
pwmdac_pins: pwmdac-0 {
pwmdac-pins {
pinmux = <GPIOMUX(33, GPOUT_SYS_PWMDAC_LEFT,
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index 4a5708f7fcf7..f906b1ec8518 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -1214,5 +1214,91 @@
#reset-cells = <1>;
power-domains = <&pwrc JH7110_PD_VOUT>;
};
+
+ pcie0: pcie@940000000 {
+ compatible = "starfive,jh7110-pcie";
+ reg = <0x9 0x40000000 0x0 0x1000000>,
+ <0x0 0x2b000000 0x0 0x100000>;
+ reg-names = "cfg", "apb";
+ linux,pci-domain = <0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0x0 0x30000000 0x0 0x30000000 0x0 0x08000000>,
+ <0xc3000000 0x9 0x00000000 0x9 0x00000000 0x0 0x40000000>;
+ interrupts = <56>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc0 0x1>,
+ <0x0 0x0 0x0 0x2 &pcie_intc0 0x2>,
+ <0x0 0x0 0x0 0x3 &pcie_intc0 0x3>,
+ <0x0 0x0 0x0 0x4 &pcie_intc0 0x4>;
+ msi-controller;
+ device_type = "pci";
+ starfive,stg-syscon = <&stg_syscon>;
+ bus-range = <0x0 0xff>;
+ clocks = <&syscrg JH7110_SYSCLK_NOC_BUS_STG_AXI>,
+ <&stgcrg JH7110_STGCLK_PCIE0_TL>,
+ <&stgcrg JH7110_STGCLK_PCIE0_AXI_MST0>,
+ <&stgcrg JH7110_STGCLK_PCIE0_APB>;
+ clock-names = "noc", "tl", "axi_mst0", "apb";
+ resets = <&stgcrg JH7110_STGRST_PCIE0_AXI_MST0>,
+ <&stgcrg JH7110_STGRST_PCIE0_AXI_SLV0>,
+ <&stgcrg JH7110_STGRST_PCIE0_AXI_SLV>,
+ <&stgcrg JH7110_STGRST_PCIE0_BRG>,
+ <&stgcrg JH7110_STGRST_PCIE0_CORE>,
+ <&stgcrg JH7110_STGRST_PCIE0_APB>;
+ reset-names = "mst0", "slv0", "slv", "brg",
+ "core", "apb";
+ status = "disabled";
+
+ pcie_intc0: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ };
+
+ pcie1: pcie@9c0000000 {
+ compatible = "starfive,jh7110-pcie";
+ reg = <0x9 0xc0000000 0x0 0x1000000>,
+ <0x0 0x2c000000 0x0 0x100000>;
+ reg-names = "cfg", "apb";
+ linux,pci-domain = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0x0 0x38000000 0x0 0x38000000 0x0 0x08000000>,
+ <0xc3000000 0x9 0x80000000 0x9 0x80000000 0x0 0x40000000>;
+ interrupts = <57>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc1 0x1>,
+ <0x0 0x0 0x0 0x2 &pcie_intc1 0x2>,
+ <0x0 0x0 0x0 0x3 &pcie_intc1 0x3>,
+ <0x0 0x0 0x0 0x4 &pcie_intc1 0x4>;
+ msi-controller;
+ device_type = "pci";
+ starfive,stg-syscon = <&stg_syscon>;
+ bus-range = <0x0 0xff>;
+ clocks = <&syscrg JH7110_SYSCLK_NOC_BUS_STG_AXI>,
+ <&stgcrg JH7110_STGCLK_PCIE1_TL>,
+ <&stgcrg JH7110_STGCLK_PCIE1_AXI_MST0>,
+ <&stgcrg JH7110_STGCLK_PCIE1_APB>;
+ clock-names = "noc", "tl", "axi_mst0", "apb";
+ resets = <&stgcrg JH7110_STGRST_PCIE1_AXI_MST0>,
+ <&stgcrg JH7110_STGRST_PCIE1_AXI_SLV0>,
+ <&stgcrg JH7110_STGRST_PCIE1_AXI_SLV>,
+ <&stgcrg JH7110_STGRST_PCIE1_BRG>,
+ <&stgcrg JH7110_STGRST_PCIE1_CORE>,
+ <&stgcrg JH7110_STGRST_PCIE1_APB>;
+ reset-names = "mst0", "slv0", "slv", "brg",
+ "core", "apb";
+ status = "disabled";
+
+ pcie_intc1: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ };
};
};
--
2.17.1
Since Microchip Polarfire PCIe host is PLDA XpressRich IP, move to
PLDA directory. Prepare for refactoring the codes.
Signed-off-by: Minda Chen <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
---
MAINTAINERS | 4 ++--
drivers/pci/controller/Kconfig | 9 +--------
drivers/pci/controller/Makefile | 2 +-
drivers/pci/controller/plda/Kconfig | 14 ++++++++++++++
drivers/pci/controller/plda/Makefile | 2 ++
.../controller/{ => plda}/pcie-microchip-host.c | 2 +-
6 files changed, 21 insertions(+), 12 deletions(-)
create mode 100644 drivers/pci/controller/plda/Kconfig
create mode 100644 drivers/pci/controller/plda/Makefile
rename drivers/pci/controller/{ => plda}/pcie-microchip-host.c (99%)
diff --git a/MAINTAINERS b/MAINTAINERS
index 06278f1db13f..dd158cc7b009 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -17183,7 +17183,7 @@ M: Daire McNamara <[email protected]>
L: [email protected]
S: Supported
F: Documentation/devicetree/bindings/pci/microchip*
-F: drivers/pci/controller/*microchip*
+F: drivers/pci/controller/plda/*microchip*
PCIE DRIVER FOR QUALCOMM MSM
M: Manivannan Sadhasivam <[email protected]>
@@ -18963,7 +18963,7 @@ F: drivers/clk/microchip/clk-mpfs*.c
F: drivers/firmware/microchip/mpfs-auto-update.c
F: drivers/i2c/busses/i2c-microchip-corei2c.c
F: drivers/mailbox/mailbox-mpfs.c
-F: drivers/pci/controller/pcie-microchip-host.c
+F: drivers/pci/controller/plda/pcie-microchip-host.c
F: drivers/pwm/pwm-microchip-core.c
F: drivers/reset/reset-mpfs.c
F: drivers/rtc/rtc-mpfs.c
diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index e534c02ee34f..4d2c188f5835 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -215,14 +215,6 @@ config PCIE_MT7621
help
This selects a driver for the MediaTek MT7621 PCIe Controller.
-config PCIE_MICROCHIP_HOST
- tristate "Microchip AXI PCIe controller"
- depends on PCI_MSI && OF
- select PCI_HOST_COMMON
- help
- Say Y here if you want kernel to support the Microchip AXI PCIe
- Host Bridge driver.
-
config PCI_HYPERV_INTERFACE
tristate "Microsoft Hyper-V PCI Interface"
depends on ((X86 && X86_64) || ARM64) && HYPERV && PCI_MSI
@@ -356,4 +348,5 @@ config PCIE_XILINX_CPM
source "drivers/pci/controller/cadence/Kconfig"
source "drivers/pci/controller/dwc/Kconfig"
source "drivers/pci/controller/mobiveil/Kconfig"
+source "drivers/pci/controller/plda/Kconfig"
endmenu
diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile
index f2b19e6174af..038ccbd9e3ba 100644
--- a/drivers/pci/controller/Makefile
+++ b/drivers/pci/controller/Makefile
@@ -33,7 +33,6 @@ obj-$(CONFIG_PCIE_ROCKCHIP_EP) += pcie-rockchip-ep.o
obj-$(CONFIG_PCIE_ROCKCHIP_HOST) += pcie-rockchip-host.o
obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o
obj-$(CONFIG_PCIE_MEDIATEK_GEN3) += pcie-mediatek-gen3.o
-obj-$(CONFIG_PCIE_MICROCHIP_HOST) += pcie-microchip-host.o
obj-$(CONFIG_VMD) += vmd.o
obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o
obj-$(CONFIG_PCI_LOONGSON) += pci-loongson.o
@@ -44,6 +43,7 @@ obj-$(CONFIG_PCIE_MT7621) += pcie-mt7621.o
# pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW
obj-y += dwc/
obj-y += mobiveil/
+obj-y += plda/
# The following drivers are for devices that use the generic ACPI
diff --git a/drivers/pci/controller/plda/Kconfig b/drivers/pci/controller/plda/Kconfig
new file mode 100644
index 000000000000..5cb3be4fc98c
--- /dev/null
+++ b/drivers/pci/controller/plda/Kconfig
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0
+
+menu "PLDA-based PCIe controllers"
+ depends on PCI
+
+config PCIE_MICROCHIP_HOST
+ tristate "Microchip AXI PCIe controller"
+ depends on PCI_MSI && OF
+ select PCI_HOST_COMMON
+ help
+ Say Y here if you want kernel to support the Microchip AXI PCIe
+ Host Bridge driver.
+
+endmenu
diff --git a/drivers/pci/controller/plda/Makefile b/drivers/pci/controller/plda/Makefile
new file mode 100644
index 000000000000..e1a265cbf91c
--- /dev/null
+++ b/drivers/pci/controller/plda/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_PCIE_MICROCHIP_HOST) += pcie-microchip-host.o
diff --git a/drivers/pci/controller/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
similarity index 99%
rename from drivers/pci/controller/pcie-microchip-host.c
rename to drivers/pci/controller/plda/pcie-microchip-host.c
index 137fb8570ba2..cb09a8137e25 100644
--- a/drivers/pci/controller/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -18,7 +18,7 @@
#include <linux/pci-ecam.h>
#include <linux/platform_device.h>
-#include "../pci.h"
+#include "../../pci.h"
/* Number of MSI IRQs */
#define MC_MAX_NUM_MSI_IRQS 32
--
2.17.1
Add PLDA PCIe related data structures by rename data structure name from
mc_* to plda_*.
axi_base_addr is stayed in struct mc_pcie since it's microchip its own
data.
The event interrupt code is still using struct mc_pcie because the event
interrupt code can not be re-used.
Signed-off-by: Minda Chen <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
---
.../pci/controller/plda/pcie-microchip-host.c | 96 ++++++++++---------
1 file changed, 53 insertions(+), 43 deletions(-)
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index c55ede80a6d0..df0736f688ce 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -22,7 +22,7 @@
#include "pcie-plda.h"
/* Number of MSI IRQs */
-#define MC_MAX_NUM_MSI_IRQS 32
+#define PLDA_MAX_NUM_MSI_IRQS 32
/* PCIe Bridge Phy and Controller Phy offsets */
#define MC_PCIE1_BRIDGE_ADDR 0x00008000u
@@ -179,25 +179,29 @@ struct event_map {
u32 event_bit;
};
-struct mc_msi {
+struct plda_msi {
struct mutex lock; /* Protect used bitmap */
struct irq_domain *msi_domain;
struct irq_domain *dev_domain;
u32 num_vectors;
u64 vector_phy;
- DECLARE_BITMAP(used, MC_MAX_NUM_MSI_IRQS);
+ DECLARE_BITMAP(used, PLDA_MAX_NUM_MSI_IRQS);
};
-struct mc_pcie {
- void __iomem *axi_base_addr;
+struct plda_pcie_rp {
struct device *dev;
struct irq_domain *intx_domain;
struct irq_domain *event_domain;
raw_spinlock_t lock;
- struct mc_msi msi;
+ struct plda_msi msi;
void __iomem *bridge_addr;
};
+struct mc_pcie {
+ struct plda_pcie_rp plda;
+ void __iomem *axi_base_addr;
+};
+
struct cause {
const char *sym;
const char *str;
@@ -313,7 +317,7 @@ static struct mc_pcie *port;
static void mc_pcie_enable_msi(struct mc_pcie *port, void __iomem *ecam)
{
- struct mc_msi *msi = &port->msi;
+ struct plda_msi *msi = &port->plda.msi;
u16 reg;
u8 queue_size;
@@ -336,10 +340,10 @@ static void mc_pcie_enable_msi(struct mc_pcie *port, void __iomem *ecam)
static void mc_handle_msi(struct irq_desc *desc)
{
- struct mc_pcie *port = irq_desc_get_handler_data(desc);
+ struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
struct irq_chip *chip = irq_desc_get_chip(desc);
struct device *dev = port->dev;
- struct mc_msi *msi = &port->msi;
+ struct plda_msi *msi = &port->msi;
void __iomem *bridge_base_addr = port->bridge_addr;
unsigned long status;
u32 bit;
@@ -364,7 +368,7 @@ static void mc_handle_msi(struct irq_desc *desc)
static void mc_msi_bottom_irq_ack(struct irq_data *data)
{
- struct mc_pcie *port = irq_data_get_irq_chip_data(data);
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
void __iomem *bridge_base_addr = port->bridge_addr;
u32 bitpos = data->hwirq;
@@ -373,7 +377,7 @@ static void mc_msi_bottom_irq_ack(struct irq_data *data)
static void mc_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
{
- struct mc_pcie *port = irq_data_get_irq_chip_data(data);
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
phys_addr_t addr = port->msi.vector_phy;
msg->address_lo = lower_32_bits(addr);
@@ -400,8 +404,8 @@ static struct irq_chip mc_msi_bottom_irq_chip = {
static int mc_irq_msi_domain_alloc(struct irq_domain *domain, unsigned int virq,
unsigned int nr_irqs, void *args)
{
- struct mc_pcie *port = domain->host_data;
- struct mc_msi *msi = &port->msi;
+ struct plda_pcie_rp *port = domain->host_data;
+ struct plda_msi *msi = &port->msi;
unsigned long bit;
mutex_lock(&msi->lock);
@@ -425,8 +429,8 @@ static void mc_irq_msi_domain_free(struct irq_domain *domain, unsigned int virq,
unsigned int nr_irqs)
{
struct irq_data *d = irq_domain_get_irq_data(domain, virq);
- struct mc_pcie *port = irq_data_get_irq_chip_data(d);
- struct mc_msi *msi = &port->msi;
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(d);
+ struct plda_msi *msi = &port->msi;
mutex_lock(&msi->lock);
@@ -456,11 +460,11 @@ static struct msi_domain_info mc_msi_domain_info = {
.chip = &mc_msi_irq_chip,
};
-static int mc_allocate_msi_domains(struct mc_pcie *port)
+static int mc_allocate_msi_domains(struct plda_pcie_rp *port)
{
struct device *dev = port->dev;
struct fwnode_handle *fwnode = of_node_to_fwnode(dev->of_node);
- struct mc_msi *msi = &port->msi;
+ struct plda_msi *msi = &port->msi;
mutex_init(&port->msi.lock);
@@ -484,7 +488,7 @@ static int mc_allocate_msi_domains(struct mc_pcie *port)
static void mc_handle_intx(struct irq_desc *desc)
{
- struct mc_pcie *port = irq_desc_get_handler_data(desc);
+ struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
struct irq_chip *chip = irq_desc_get_chip(desc);
struct device *dev = port->dev;
void __iomem *bridge_base_addr = port->bridge_addr;
@@ -511,7 +515,7 @@ static void mc_handle_intx(struct irq_desc *desc)
static void mc_ack_intx_irq(struct irq_data *data)
{
- struct mc_pcie *port = irq_data_get_irq_chip_data(data);
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
void __iomem *bridge_base_addr = port->bridge_addr;
u32 mask = BIT(data->hwirq + PM_MSI_INT_INTX_SHIFT);
@@ -520,7 +524,7 @@ static void mc_ack_intx_irq(struct irq_data *data)
static void mc_mask_intx_irq(struct irq_data *data)
{
- struct mc_pcie *port = irq_data_get_irq_chip_data(data);
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
void __iomem *bridge_base_addr = port->bridge_addr;
unsigned long flags;
u32 mask = BIT(data->hwirq + PM_MSI_INT_INTX_SHIFT);
@@ -535,7 +539,7 @@ static void mc_mask_intx_irq(struct irq_data *data)
static void mc_unmask_intx_irq(struct irq_data *data)
{
- struct mc_pcie *port = irq_data_get_irq_chip_data(data);
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
void __iomem *bridge_base_addr = port->bridge_addr;
unsigned long flags;
u32 mask = BIT(data->hwirq + PM_MSI_INT_INTX_SHIFT);
@@ -625,21 +629,22 @@ static u32 local_events(struct mc_pcie *port)
return val;
}
-static u32 get_events(struct mc_pcie *port)
+static u32 get_events(struct plda_pcie_rp *port)
{
+ struct mc_pcie *mc_port = container_of(port, struct mc_pcie, plda);
u32 events = 0;
- events |= pcie_events(port);
- events |= sec_errors(port);
- events |= ded_errors(port);
- events |= local_events(port);
+ events |= pcie_events(mc_port);
+ events |= sec_errors(mc_port);
+ events |= ded_errors(mc_port);
+ events |= local_events(mc_port);
return events;
}
static irqreturn_t mc_event_handler(int irq, void *dev_id)
{
- struct mc_pcie *port = dev_id;
+ struct plda_pcie_rp *port = dev_id;
struct device *dev = port->dev;
struct irq_data *data;
@@ -655,7 +660,7 @@ static irqreturn_t mc_event_handler(int irq, void *dev_id)
static void mc_handle_event(struct irq_desc *desc)
{
- struct mc_pcie *port = irq_desc_get_handler_data(desc);
+ struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
unsigned long events;
u32 bit;
struct irq_chip *chip = irq_desc_get_chip(desc);
@@ -672,12 +677,13 @@ static void mc_handle_event(struct irq_desc *desc)
static void mc_ack_event_irq(struct irq_data *data)
{
- struct mc_pcie *port = irq_data_get_irq_chip_data(data);
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
+ struct mc_pcie *mc_port = container_of(port, struct mc_pcie, plda);
u32 event = data->hwirq;
void __iomem *addr;
u32 mask;
- addr = port->axi_base_addr + event_descs[event].base +
+ addr = mc_port->axi_base_addr + event_descs[event].base +
event_descs[event].offset;
mask = event_descs[event].mask;
mask |= event_descs[event].enb_mask;
@@ -687,13 +693,14 @@ static void mc_ack_event_irq(struct irq_data *data)
static void mc_mask_event_irq(struct irq_data *data)
{
- struct mc_pcie *port = irq_data_get_irq_chip_data(data);
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
+ struct mc_pcie *mc_port = container_of(port, struct mc_pcie, plda);
u32 event = data->hwirq;
void __iomem *addr;
u32 mask;
u32 val;
- addr = port->axi_base_addr + event_descs[event].base +
+ addr = mc_port->axi_base_addr + event_descs[event].base +
event_descs[event].mask_offset;
mask = event_descs[event].mask;
if (event_descs[event].enb_mask) {
@@ -717,13 +724,14 @@ static void mc_mask_event_irq(struct irq_data *data)
static void mc_unmask_event_irq(struct irq_data *data)
{
- struct mc_pcie *port = irq_data_get_irq_chip_data(data);
+ struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
+ struct mc_pcie *mc_port = container_of(port, struct mc_pcie, plda);
u32 event = data->hwirq;
void __iomem *addr;
u32 mask;
u32 val;
- addr = port->axi_base_addr + event_descs[event].base +
+ addr = mc_port->axi_base_addr + event_descs[event].base +
event_descs[event].mask_offset;
mask = event_descs[event].mask;
@@ -811,7 +819,7 @@ static int mc_pcie_init_clks(struct device *dev)
return 0;
}
-static int mc_pcie_init_irq_domains(struct mc_pcie *port)
+static int mc_pcie_init_irq_domains(struct plda_pcie_rp *port)
{
struct device *dev = port->dev;
struct device_node *node = dev->of_node;
@@ -889,7 +897,7 @@ static void mc_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
}
static int mc_pcie_setup_windows(struct platform_device *pdev,
- struct mc_pcie *port)
+ struct plda_pcie_rp *port)
{
void __iomem *bridge_base_addr = port->bridge_addr;
struct pci_host_bridge *bridge = platform_get_drvdata(pdev);
@@ -970,7 +978,7 @@ static void mc_disable_interrupts(struct mc_pcie *port)
writel_relaxed(GENMASK(31, 0), bridge_base_addr + ISTATUS_HOST);
}
-static int mc_init_interrupts(struct platform_device *pdev, struct mc_pcie *port)
+static int mc_init_interrupts(struct platform_device *pdev, struct plda_pcie_rp *port)
{
struct device *dev = &pdev->dev;
int irq;
@@ -1043,12 +1051,12 @@ static int mc_platform_init(struct pci_config_window *cfg)
mc_pcie_enable_msi(port, cfg->win);
/* Configure non-config space outbound ranges */
- ret = mc_pcie_setup_windows(pdev, port);
+ ret = mc_pcie_setup_windows(pdev, &port->plda);
if (ret)
return ret;
/* Address translation is up; safe to enable interrupts */
- ret = mc_init_interrupts(pdev, port);
+ ret = mc_init_interrupts(pdev, &port->plda);
if (ret)
return ret;
@@ -1059,6 +1067,7 @@ static int mc_host_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
void __iomem *bridge_base_addr;
+ struct plda_pcie_rp *plda;
int ret;
u32 val;
@@ -1066,7 +1075,8 @@ static int mc_host_probe(struct platform_device *pdev)
if (!port)
return -ENOMEM;
- port->dev = dev;
+ plda = &port->plda;
+ plda->dev = dev;
port->axi_base_addr = devm_platform_ioremap_resource(pdev, 1);
if (IS_ERR(port->axi_base_addr))
@@ -1075,7 +1085,7 @@ static int mc_host_probe(struct platform_device *pdev)
mc_disable_interrupts(port);
bridge_base_addr = port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
- port->bridge_addr = bridge_base_addr;
+ plda->bridge_addr = bridge_base_addr;
/* Allow enabling MSI by disabling MSI-X */
val = readl(bridge_base_addr + PCIE_PCI_IRQ_DW0);
@@ -1087,10 +1097,10 @@ static int mc_host_probe(struct platform_device *pdev)
val &= NUM_MSI_MSGS_MASK;
val >>= NUM_MSI_MSGS_SHIFT;
- port->msi.num_vectors = 1 << val;
+ plda->msi.num_vectors = 1 << val;
/* Pick vector address from design */
- port->msi.vector_phy = readl_relaxed(bridge_base_addr + IMSI_ADDR);
+ plda->msi.vector_phy = readl_relaxed(bridge_base_addr + IMSI_ADDR);
ret = mc_pcie_init_clks(dev);
if (ret) {
--
2.17.1
Rename mc_* to plda_* for IRQ functions and related IRQ domain ops data
instances.
MSI, INTx interrupt code and IRQ init code are all can be re-used.
Signed-off-by: Minda Chen <[email protected]>
Acked-by: Conor Dooley <[email protected]>
---
.../pci/controller/plda/pcie-microchip-host.c | 109 +++++++++---------
1 file changed, 57 insertions(+), 52 deletions(-)
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index 573ad31c578a..18bc352db389 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -318,7 +318,7 @@ static void mc_pcie_enable_msi(struct mc_pcie *port, void __iomem *ecam)
ecam + MC_MSI_CAP_CTRL_OFFSET + PCI_MSI_ADDRESS_HI);
}
-static void mc_handle_msi(struct irq_desc *desc)
+static void plda_handle_msi(struct irq_desc *desc)
{
struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
struct irq_chip *chip = irq_desc_get_chip(desc);
@@ -346,7 +346,7 @@ static void mc_handle_msi(struct irq_desc *desc)
chained_irq_exit(chip, desc);
}
-static void mc_msi_bottom_irq_ack(struct irq_data *data)
+static void plda_msi_bottom_irq_ack(struct irq_data *data)
{
struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
void __iomem *bridge_base_addr = port->bridge_addr;
@@ -355,7 +355,7 @@ static void mc_msi_bottom_irq_ack(struct irq_data *data)
writel_relaxed(BIT(bitpos), bridge_base_addr + ISTATUS_MSI);
}
-static void mc_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
+static void plda_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
{
struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
phys_addr_t addr = port->msi.vector_phy;
@@ -368,21 +368,23 @@ static void mc_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
(int)data->hwirq, msg->address_hi, msg->address_lo);
}
-static int mc_msi_set_affinity(struct irq_data *irq_data,
- const struct cpumask *mask, bool force)
+static int plda_msi_set_affinity(struct irq_data *irq_data,
+ const struct cpumask *mask, bool force)
{
return -EINVAL;
}
-static struct irq_chip mc_msi_bottom_irq_chip = {
- .name = "Microchip MSI",
- .irq_ack = mc_msi_bottom_irq_ack,
- .irq_compose_msi_msg = mc_compose_msi_msg,
- .irq_set_affinity = mc_msi_set_affinity,
+static struct irq_chip plda_msi_bottom_irq_chip = {
+ .name = "PLDA MSI",
+ .irq_ack = plda_msi_bottom_irq_ack,
+ .irq_compose_msi_msg = plda_compose_msi_msg,
+ .irq_set_affinity = plda_msi_set_affinity,
};
-static int mc_irq_msi_domain_alloc(struct irq_domain *domain, unsigned int virq,
- unsigned int nr_irqs, void *args)
+static int plda_irq_msi_domain_alloc(struct irq_domain *domain,
+ unsigned int virq,
+ unsigned int nr_irqs,
+ void *args)
{
struct plda_pcie_rp *port = domain->host_data;
struct plda_msi *msi = &port->msi;
@@ -397,7 +399,7 @@ static int mc_irq_msi_domain_alloc(struct irq_domain *domain, unsigned int virq,
set_bit(bit, msi->used);
- irq_domain_set_info(domain, virq, bit, &mc_msi_bottom_irq_chip,
+ irq_domain_set_info(domain, virq, bit, &plda_msi_bottom_irq_chip,
domain->host_data, handle_edge_irq, NULL, NULL);
mutex_unlock(&msi->lock);
@@ -405,8 +407,9 @@ static int mc_irq_msi_domain_alloc(struct irq_domain *domain, unsigned int virq,
return 0;
}
-static void mc_irq_msi_domain_free(struct irq_domain *domain, unsigned int virq,
- unsigned int nr_irqs)
+static void plda_irq_msi_domain_free(struct irq_domain *domain,
+ unsigned int virq,
+ unsigned int nr_irqs)
{
struct irq_data *d = irq_domain_get_irq_data(domain, virq);
struct plda_pcie_rp *port = irq_data_get_irq_chip_data(d);
@@ -423,24 +426,24 @@ static void mc_irq_msi_domain_free(struct irq_domain *domain, unsigned int virq,
}
static const struct irq_domain_ops msi_domain_ops = {
- .alloc = mc_irq_msi_domain_alloc,
- .free = mc_irq_msi_domain_free,
+ .alloc = plda_irq_msi_domain_alloc,
+ .free = plda_irq_msi_domain_free,
};
-static struct irq_chip mc_msi_irq_chip = {
- .name = "Microchip PCIe MSI",
+static struct irq_chip plda_msi_irq_chip = {
+ .name = "PLDA PCIe MSI",
.irq_ack = irq_chip_ack_parent,
.irq_mask = pci_msi_mask_irq,
.irq_unmask = pci_msi_unmask_irq,
};
-static struct msi_domain_info mc_msi_domain_info = {
+static struct msi_domain_info plda_msi_domain_info = {
.flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
MSI_FLAG_PCI_MSIX),
- .chip = &mc_msi_irq_chip,
+ .chip = &plda_msi_irq_chip,
};
-static int mc_allocate_msi_domains(struct plda_pcie_rp *port)
+static int plda_allocate_msi_domains(struct plda_pcie_rp *port)
{
struct device *dev = port->dev;
struct fwnode_handle *fwnode = of_node_to_fwnode(dev->of_node);
@@ -455,7 +458,8 @@ static int mc_allocate_msi_domains(struct plda_pcie_rp *port)
return -ENOMEM;
}
- msi->msi_domain = pci_msi_create_irq_domain(fwnode, &mc_msi_domain_info,
+ msi->msi_domain = pci_msi_create_irq_domain(fwnode,
+ &plda_msi_domain_info,
msi->dev_domain);
if (!msi->msi_domain) {
dev_err(dev, "failed to create MSI domain\n");
@@ -466,7 +470,7 @@ static int mc_allocate_msi_domains(struct plda_pcie_rp *port)
return 0;
}
-static void mc_handle_intx(struct irq_desc *desc)
+static void plda_handle_intx(struct irq_desc *desc)
{
struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
struct irq_chip *chip = irq_desc_get_chip(desc);
@@ -493,7 +497,7 @@ static void mc_handle_intx(struct irq_desc *desc)
chained_irq_exit(chip, desc);
}
-static void mc_ack_intx_irq(struct irq_data *data)
+static void plda_ack_intx_irq(struct irq_data *data)
{
struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
void __iomem *bridge_base_addr = port->bridge_addr;
@@ -502,7 +506,7 @@ static void mc_ack_intx_irq(struct irq_data *data)
writel_relaxed(mask, bridge_base_addr + ISTATUS_LOCAL);
}
-static void mc_mask_intx_irq(struct irq_data *data)
+static void plda_mask_intx_irq(struct irq_data *data)
{
struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
void __iomem *bridge_base_addr = port->bridge_addr;
@@ -517,7 +521,7 @@ static void mc_mask_intx_irq(struct irq_data *data)
raw_spin_unlock_irqrestore(&port->lock, flags);
}
-static void mc_unmask_intx_irq(struct irq_data *data)
+static void plda_unmask_intx_irq(struct irq_data *data)
{
struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
void __iomem *bridge_base_addr = port->bridge_addr;
@@ -532,24 +536,24 @@ static void mc_unmask_intx_irq(struct irq_data *data)
raw_spin_unlock_irqrestore(&port->lock, flags);
}
-static struct irq_chip mc_intx_irq_chip = {
- .name = "Microchip PCIe INTx",
- .irq_ack = mc_ack_intx_irq,
- .irq_mask = mc_mask_intx_irq,
- .irq_unmask = mc_unmask_intx_irq,
+static struct irq_chip plda_intx_irq_chip = {
+ .name = "PLDA PCIe INTx",
+ .irq_ack = plda_ack_intx_irq,
+ .irq_mask = plda_mask_intx_irq,
+ .irq_unmask = plda_unmask_intx_irq,
};
-static int mc_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
- irq_hw_number_t hwirq)
+static int plda_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
+ irq_hw_number_t hwirq)
{
- irq_set_chip_and_handler(irq, &mc_intx_irq_chip, handle_level_irq);
+ irq_set_chip_and_handler(irq, &plda_intx_irq_chip, handle_level_irq);
irq_set_chip_data(irq, domain->host_data);
return 0;
}
static const struct irq_domain_ops intx_domain_ops = {
- .map = mc_pcie_intx_map,
+ .map = plda_pcie_intx_map,
};
static inline u32 reg_to_event(u32 reg, struct event_map field)
@@ -609,7 +613,7 @@ static u32 local_events(struct mc_pcie *port)
return val;
}
-static u32 get_events(struct plda_pcie_rp *port)
+static u32 mc_get_events(struct plda_pcie_rp *port)
{
struct mc_pcie *mc_port = container_of(port, struct mc_pcie, plda);
u32 events = 0;
@@ -638,7 +642,7 @@ static irqreturn_t mc_event_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static void mc_handle_event(struct irq_desc *desc)
+static void plda_handle_event(struct irq_desc *desc)
{
struct plda_pcie_rp *port = irq_desc_get_handler_data(desc);
unsigned long events;
@@ -647,7 +651,7 @@ static void mc_handle_event(struct irq_desc *desc)
chained_irq_enter(chip, desc);
- events = get_events(port);
+ events = mc_get_events(port);
for_each_set_bit(bit, &events, NUM_EVENTS)
generic_handle_domain_irq(port->event_domain, bit);
@@ -741,8 +745,8 @@ static struct irq_chip mc_event_irq_chip = {
.irq_unmask = mc_unmask_event_irq,
};
-static int mc_pcie_event_map(struct irq_domain *domain, unsigned int irq,
- irq_hw_number_t hwirq)
+static int plda_pcie_event_map(struct irq_domain *domain, unsigned int irq,
+ irq_hw_number_t hwirq)
{
irq_set_chip_and_handler(irq, &mc_event_irq_chip, handle_level_irq);
irq_set_chip_data(irq, domain->host_data);
@@ -750,8 +754,8 @@ static int mc_pcie_event_map(struct irq_domain *domain, unsigned int irq,
return 0;
}
-static const struct irq_domain_ops event_domain_ops = {
- .map = mc_pcie_event_map,
+static const struct irq_domain_ops plda_event_domain_ops = {
+ .map = plda_pcie_event_map,
};
static inline void mc_pcie_deinit_clk(void *data)
@@ -799,7 +803,7 @@ static int mc_pcie_init_clks(struct device *dev)
return 0;
}
-static int mc_pcie_init_irq_domains(struct plda_pcie_rp *port)
+static int plda_pcie_init_irq_domains(struct plda_pcie_rp *port)
{
struct device *dev = port->dev;
struct device_node *node = dev->of_node;
@@ -813,7 +817,8 @@ static int mc_pcie_init_irq_domains(struct plda_pcie_rp *port)
}
port->event_domain = irq_domain_add_linear(pcie_intc_node, NUM_EVENTS,
- &event_domain_ops, port);
+ &plda_event_domain_ops,
+ port);
if (!port->event_domain) {
dev_err(dev, "failed to get event domain\n");
of_node_put(pcie_intc_node);
@@ -835,7 +840,7 @@ static int mc_pcie_init_irq_domains(struct plda_pcie_rp *port)
of_node_put(pcie_intc_node);
raw_spin_lock_init(&port->lock);
- return mc_allocate_msi_domains(port);
+ return plda_allocate_msi_domains(port);
}
static inline void mc_clear_secs(struct mc_pcie *port)
@@ -898,14 +903,14 @@ static void mc_disable_interrupts(struct mc_pcie *port)
writel_relaxed(GENMASK(31, 0), bridge_base_addr + ISTATUS_HOST);
}
-static int mc_init_interrupts(struct platform_device *pdev, struct plda_pcie_rp *port)
+static int plda_init_interrupts(struct platform_device *pdev, struct plda_pcie_rp *port)
{
struct device *dev = &pdev->dev;
int irq;
int i, intx_irq, msi_irq, event_irq;
int ret;
- ret = mc_pcie_init_irq_domains(port);
+ ret = plda_pcie_init_irq_domains(port);
if (ret) {
dev_err(dev, "failed creating IRQ domains\n");
return ret;
@@ -938,7 +943,7 @@ static int mc_init_interrupts(struct platform_device *pdev, struct plda_pcie_rp
}
/* Plug the INTx chained handler */
- irq_set_chained_handler_and_data(intx_irq, mc_handle_intx, port);
+ irq_set_chained_handler_and_data(intx_irq, plda_handle_intx, port);
msi_irq = irq_create_mapping(port->event_domain,
EVENT_LOCAL_PM_MSI_INT_MSI);
@@ -946,10 +951,10 @@ static int mc_init_interrupts(struct platform_device *pdev, struct plda_pcie_rp
return -ENXIO;
/* Plug the MSI chained handler */
- irq_set_chained_handler_and_data(msi_irq, mc_handle_msi, port);
+ irq_set_chained_handler_and_data(msi_irq, plda_handle_msi, port);
/* Plug the main event chained handler */
- irq_set_chained_handler_and_data(irq, mc_handle_event, port);
+ irq_set_chained_handler_and_data(irq, plda_handle_event, port);
return 0;
}
@@ -977,7 +982,7 @@ static int mc_platform_init(struct pci_config_window *cfg)
return ret;
/* Address translation is up; safe to enable interrupts */
- ret = mc_init_interrupts(pdev, &port->plda);
+ ret = plda_init_interrupts(pdev, &port->plda);
if (ret)
return ret;
--
2.17.1
Add StarFive JH7110 SoC PCIe controller dt-bindings. JH7110 using PLDA
XpressRICH PCIe host controller IP.
Signed-off-by: Minda Chen <[email protected]>
Reviewed-by: Hal Feng <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---
.../bindings/pci/starfive,jh7110-pcie.yaml | 120 ++++++++++++++++++
MAINTAINERS | 6 +
2 files changed, 126 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
diff --git a/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml b/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
new file mode 100644
index 000000000000..67151aaa3948
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/starfive,jh7110-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 PCIe host controller
+
+maintainers:
+ - Kevin Xie <[email protected]>
+
+allOf:
+ - $ref: plda,xpressrich3-axi-common.yaml#
+
+properties:
+ compatible:
+ const: starfive,jh7110-pcie
+
+ clocks:
+ items:
+ - description: NOC bus clock
+ - description: Transport layer clock
+ - description: AXI MST0 clock
+ - description: APB clock
+
+ clock-names:
+ items:
+ - const: noc
+ - const: tl
+ - const: axi_mst0
+ - const: apb
+
+ resets:
+ items:
+ - description: AXI MST0 reset
+ - description: AXI SLAVE0 reset
+ - description: AXI SLAVE reset
+ - description: PCIE BRIDGE reset
+ - description: PCIE CORE reset
+ - description: PCIE APB reset
+
+ reset-names:
+ items:
+ - const: mst0
+ - const: slv0
+ - const: slv
+ - const: brg
+ - const: core
+ - const: apb
+
+ starfive,stg-syscon:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description:
+ The phandle to System Register Controller syscon node.
+
+ perst-gpios:
+ description: GPIO controlled connection to PERST# signal
+ maxItems: 1
+
+ phys:
+ description:
+ Specified PHY is attached to PCIe controller.
+ maxItems: 1
+
+required:
+ - clocks
+ - resets
+ - starfive,stg-syscon
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie@940000000 {
+ compatible = "starfive,jh7110-pcie";
+ reg = <0x9 0x40000000 0x0 0x10000000>,
+ <0x0 0x2b000000 0x0 0x1000000>;
+ reg-names = "cfg", "apb";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ ranges = <0x82000000 0x0 0x30000000 0x0 0x30000000 0x0 0x08000000>,
+ <0xc3000000 0x9 0x00000000 0x9 0x00000000 0x0 0x40000000>;
+ starfive,stg-syscon = <&stg_syscon>;
+ bus-range = <0x0 0xff>;
+ interrupt-parent = <&plic>;
+ interrupts = <56>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc0 0x1>,
+ <0x0 0x0 0x0 0x2 &pcie_intc0 0x2>,
+ <0x0 0x0 0x0 0x3 &pcie_intc0 0x3>,
+ <0x0 0x0 0x0 0x4 &pcie_intc0 0x4>;
+ msi-controller;
+ clocks = <&syscrg 86>,
+ <&stgcrg 10>,
+ <&stgcrg 8>,
+ <&stgcrg 9>;
+ clock-names = "noc", "tl", "axi_mst0", "apb";
+ resets = <&stgcrg 11>,
+ <&stgcrg 12>,
+ <&stgcrg 13>,
+ <&stgcrg 14>,
+ <&stgcrg 15>,
+ <&stgcrg 16>;
+ perst-gpios = <&gpios 26 GPIO_ACTIVE_LOW>;
+ phys = <&pciephy0>;
+
+ pcie_intc0: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index d85d9db38efa..3772f6893818 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -17215,6 +17215,12 @@ L: [email protected]
S: Maintained
F: drivers/pci/controller/dwc/*spear*
+PCIE DRIVER FOR STARFIVE JH71x0
+M: Kevin Xie <[email protected]>
+L: [email protected]
+S: Maintained
+F: Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
+
PCIE ENDPOINT DRIVER FOR QUALCOMM
M: Manivannan Sadhasivam <[email protected]>
L: [email protected]
--
2.17.1
From: Kevin Xie <[email protected]>
Add the PCIE_RESET_CONFIG_DEVICE_WAIT_MS macro to define the minimum
waiting time between exit from a conventional reset and sending the
first configuration request to the device.
As described in PCI base specification r6.0, section 6.6.1 <Conventional
Reset>, there are two different use cases of the value:
- "With a Downstream Port that does not support Link speeds greater
than 5.0 GT/s, software must wait a minimum of 100 ms following exit
from a Conventional Reset before sending a Configuration Request to
the device immediately below that Port."
- "With a Downstream Port that supports Link speeds greater than
5.0 GT/s, software must wait a minimum of 100 ms after Link training
completes before sending a Configuration Request to the device
immediately below that Port."
Signed-off-by: Kevin Xie <[email protected]>
Reviewed-by: Mason Huo <[email protected]>
Acked-by: Bjorn Helgaas <[email protected]>
---
drivers/pci/pci.h | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 17fed1846847..6fa59d6aa063 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -22,6 +22,22 @@
*/
#define PCIE_PME_TO_L2_TIMEOUT_US 10000
+/*
+ * As described in PCI base specification r6.0, section 6.6.1 <Conventional
+ * Reset>, there are two different use cases of the value:
+ *
+ * - "With a Downstream Port that does not support Link speeds greater
+ * than 5.0 GT/s, software must wait a minimum of 100 ms following exit
+ * from a Conventional Reset before sending a Configuration Request to
+ * the device immediately below that Port."
+ *
+ * - "With a Downstream Port that supports Link speeds greater than
+ * 5.0 GT/s, software must wait a minimum of 100 ms after Link training
+ * completes before sending a Configuration Request to the device
+ * immediately below that Port."
+ */
+#define PCIE_RESET_CONFIG_DEVICE_WAIT_MS 100
+
extern const unsigned char pcie_link_speed[];
extern bool pci_early_dump;
--
2.17.1
Bridge address base is common PLDA field, add this to struct mc_pcie
first.
INTx and MSI interrupt code will be changed to common code, so get
the bridge base address from port->bridge_addr instead of
axi_base_addr. axi_base_addr is Microchip its own data.
Signed-off-by: Minda Chen <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
---
.../pci/controller/plda/pcie-microchip-host.c | 23 ++++++++-----------
1 file changed, 9 insertions(+), 14 deletions(-)
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index d9030d550482..c55ede80a6d0 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -195,6 +195,7 @@ struct mc_pcie {
struct irq_domain *event_domain;
raw_spinlock_t lock;
struct mc_msi msi;
+ void __iomem *bridge_addr;
};
struct cause {
@@ -339,8 +340,7 @@ static void mc_handle_msi(struct irq_desc *desc)
struct irq_chip *chip = irq_desc_get_chip(desc);
struct device *dev = port->dev;
struct mc_msi *msi = &port->msi;
- void __iomem *bridge_base_addr =
- port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
+ void __iomem *bridge_base_addr = port->bridge_addr;
unsigned long status;
u32 bit;
int ret;
@@ -365,8 +365,7 @@ static void mc_handle_msi(struct irq_desc *desc)
static void mc_msi_bottom_irq_ack(struct irq_data *data)
{
struct mc_pcie *port = irq_data_get_irq_chip_data(data);
- void __iomem *bridge_base_addr =
- port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
+ void __iomem *bridge_base_addr = port->bridge_addr;
u32 bitpos = data->hwirq;
writel_relaxed(BIT(bitpos), bridge_base_addr + ISTATUS_MSI);
@@ -488,8 +487,7 @@ static void mc_handle_intx(struct irq_desc *desc)
struct mc_pcie *port = irq_desc_get_handler_data(desc);
struct irq_chip *chip = irq_desc_get_chip(desc);
struct device *dev = port->dev;
- void __iomem *bridge_base_addr =
- port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
+ void __iomem *bridge_base_addr = port->bridge_addr;
unsigned long status;
u32 bit;
int ret;
@@ -514,8 +512,7 @@ static void mc_handle_intx(struct irq_desc *desc)
static void mc_ack_intx_irq(struct irq_data *data)
{
struct mc_pcie *port = irq_data_get_irq_chip_data(data);
- void __iomem *bridge_base_addr =
- port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
+ void __iomem *bridge_base_addr = port->bridge_addr;
u32 mask = BIT(data->hwirq + PM_MSI_INT_INTX_SHIFT);
writel_relaxed(mask, bridge_base_addr + ISTATUS_LOCAL);
@@ -524,8 +521,7 @@ static void mc_ack_intx_irq(struct irq_data *data)
static void mc_mask_intx_irq(struct irq_data *data)
{
struct mc_pcie *port = irq_data_get_irq_chip_data(data);
- void __iomem *bridge_base_addr =
- port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
+ void __iomem *bridge_base_addr = port->bridge_addr;
unsigned long flags;
u32 mask = BIT(data->hwirq + PM_MSI_INT_INTX_SHIFT);
u32 val;
@@ -540,8 +536,7 @@ static void mc_mask_intx_irq(struct irq_data *data)
static void mc_unmask_intx_irq(struct irq_data *data)
{
struct mc_pcie *port = irq_data_get_irq_chip_data(data);
- void __iomem *bridge_base_addr =
- port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
+ void __iomem *bridge_base_addr = port->bridge_addr;
unsigned long flags;
u32 mask = BIT(data->hwirq + PM_MSI_INT_INTX_SHIFT);
u32 val;
@@ -896,8 +891,7 @@ static void mc_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
static int mc_pcie_setup_windows(struct platform_device *pdev,
struct mc_pcie *port)
{
- void __iomem *bridge_base_addr =
- port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
+ void __iomem *bridge_base_addr = port->bridge_addr;
struct pci_host_bridge *bridge = platform_get_drvdata(pdev);
struct resource_entry *entry;
u64 pci_addr;
@@ -1081,6 +1075,7 @@ static int mc_host_probe(struct platform_device *pdev)
mc_disable_interrupts(port);
bridge_base_addr = port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
+ port->bridge_addr = bridge_base_addr;
/* Allow enabling MSI by disabling MSI-X */
val = readl(bridge_base_addr + PCIE_PCI_IRQ_DW0);
--
2.17.1
>
> As PLDA dts binding doc(Documentation/devicetree/bindings/pci/
> plda,xpressrich3-axi-common.yaml) showed, PLDA PCIe contains an interrupt
> controller.
>
> Microchip PolarFire PCIE event IRQs includes PLDA interrupts and Polarfire
> additional interrupts. The interrupt irqchip ops includes ack/mask/unmask
> interrupt ops, which will write correct registers.
> Microchip Polarfire PCIe additional interrupts require to write Polarfire SoC
> self-defined registers. So Microchip PCIe event irqchip ops can not be re-used.
>
> Microchip Polarfire PCIe additional intrerrupts:
> (defined in drivers/pci/controller/plda/pcie-microchip-host.c)
> EVENT_PCIE_L2_EXIT
> EVENT_PCIE_HOTRST_EXIT
> EVENT_PCIE_DLUP_EXIT
> EVENT_SEC_TX_RAM_SEC_ERR
> EVENT_SEC_RX_RAM_SEC_ERR
> ....
>
> To support PLDA its own event IRQ process, implements PLDA irqchip ops and
> add event irqchip field to struct pcie_plda_rp.
>
Hi Thomas
Could you review this patch? Thanks.
> Signed-off-by: Minda Chen <[email protected]>
> Acked-by: Conor Dooley <[email protected]>
> ---
> .../pci/controller/plda/pcie-microchip-host.c | 66 ++++++++++++++++++-
> drivers/pci/controller/plda/pcie-plda.h | 34 +++++-----
> 2 files changed, 84 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c
> b/drivers/pci/controller/plda/pcie-microchip-host.c
> index b3df373a2141..beaf5c27da84 100644
> --- a/drivers/pci/controller/plda/pcie-microchip-host.c
> +++ b/drivers/pci/controller/plda/pcie-microchip-host.c
> @@ -770,6 +770,64 @@ static struct irq_chip mc_event_irq_chip = {
> .irq_unmask = mc_unmask_event_irq,
> };
>
> +static u32 plda_hwirq_to_mask(int hwirq) {
> + u32 mask;
> +
> + /* hwirq 23 - 0 are the same with register */
> + if (hwirq < EVENT_PM_MSI_INT_INTX)
> + mask = BIT(hwirq);
> + else if (hwirq == EVENT_PM_MSI_INT_INTX)
> + mask = PM_MSI_INT_INTX_MASK;
> + else
> + mask = BIT(hwirq + PCI_NUM_INTX - 1);
> +
> + return mask;
> +}
> +
> +static void plda_ack_event_irq(struct irq_data *data) {
> + struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
> +
> + writel_relaxed(plda_hwirq_to_mask(data->hwirq),
> + port->bridge_addr + ISTATUS_LOCAL); }
> +
> +static void plda_mask_event_irq(struct irq_data *data) {
> + struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
> + u32 mask, val;
> +
> + mask = plda_hwirq_to_mask(data->hwirq);
> +
> + raw_spin_lock(&port->lock);
> + val = readl_relaxed(port->bridge_addr + IMASK_LOCAL);
> + val &= ~mask;
> + writel_relaxed(val, port->bridge_addr + IMASK_LOCAL);
> + raw_spin_unlock(&port->lock);
> +}
> +
> +static void plda_unmask_event_irq(struct irq_data *data) {
> + struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
> + u32 mask, val;
> +
> + mask = plda_hwirq_to_mask(data->hwirq);
> +
> + raw_spin_lock(&port->lock);
> + val = readl_relaxed(port->bridge_addr + IMASK_LOCAL);
> + val |= mask;
> + writel_relaxed(val, port->bridge_addr + IMASK_LOCAL);
> + raw_spin_unlock(&port->lock);
> +}
> +
> +static struct irq_chip plda_event_irq_chip = {
> + .name = "PLDA PCIe EVENT",
> + .irq_ack = plda_ack_event_irq,
> + .irq_mask = plda_mask_event_irq,
> + .irq_unmask = plda_unmask_event_irq,
> +};
> +
> static const struct plda_event_ops plda_event_ops = {
> .get_events = plda_get_events,
> };
> @@ -777,7 +835,9 @@ static const struct plda_event_ops plda_event_ops =
> { static int plda_pcie_event_map(struct irq_domain *domain, unsigned int irq,
> irq_hw_number_t hwirq)
> {
> - irq_set_chip_and_handler(irq, &mc_event_irq_chip, handle_level_irq);
> + struct plda_pcie_rp *port = (void *)domain->host_data;
> +
> + irq_set_chip_and_handler(irq, port->event_irq_chip, handle_level_irq);
> irq_set_chip_data(irq, domain->host_data);
>
> return 0;
> @@ -962,6 +1022,9 @@ static int plda_init_interrupts(struct platform_device
> *pdev,
> if (!port->event_ops)
> port->event_ops = &plda_event_ops;
>
> + if (!port->event_irq_chip)
> + port->event_irq_chip = &plda_event_irq_chip;
> +
> ret = plda_pcie_init_irq_domains(port);
> if (ret) {
> dev_err(dev, "failed creating IRQ domains\n"); @@ -1039,6 +1102,7
> @@ static int mc_platform_init(struct pci_config_window *cfg)
> return ret;
>
> port->plda.event_ops = &mc_event_ops;
> + port->plda.event_irq_chip = &mc_event_irq_chip;
>
> /* Address translation is up; safe to enable interrupts */
> ret = plda_init_interrupts(pdev, &port->plda, &mc_event); diff --git
> a/drivers/pci/controller/plda/pcie-plda.h
> b/drivers/pci/controller/plda/pcie-plda.h
> index e0e5e7cc8434..0e5157eb3a32 100644
> --- a/drivers/pci/controller/plda/pcie-plda.h
> +++ b/drivers/pci/controller/plda/pcie-plda.h
> @@ -107,6 +107,8 @@ enum plda_int_event {
>
> #define PLDA_NUM_DMA_EVENTS 16
>
> +#define EVENT_PM_MSI_INT_INTX (PLDA_NUM_DMA_EVENTS +
> PLDA_INTX)
> +#define EVENT_PM_MSI_INT_MSI (PLDA_NUM_DMA_EVENTS +
> PLDA_MSI)
> #define PLDA_MAX_EVENT_NUM (PLDA_NUM_DMA_EVENTS +
> PLDA_INT_EVENT_NUM)
>
> /*
> @@ -116,21 +118,22 @@ enum plda_int_event {
> * +--+--+--+-+------+-+-+-+-+-+-+-+-+-----------+-----------+
> * |12|11|10|9| intx |7|6|5|4|3|2|1|0| DMA error | DMA end |
> * +--+--+--+-+------+-+-+-+-+-+-+-+-+-----------+-----------+
> - * bit 0-7 DMA interrupt end : reserved for vendor implement
> - * bit 8-15 DMA error : reserved for vendor implement
> - * 0: AXI post error (PLDA_AXI_POST_ERR)
> - * 1: AXI fetch error (PLDA_AXI_FETCH_ERR)
> - * 2: AXI discard error (PLDA_AXI_DISCARD_ERR)
> - * 3: AXI doorbell (PLDA_PCIE_DOORBELL)
> - * 4: PCIe post error (PLDA_PCIE_POST_ERR)
> - * 5: PCIe fetch error (PLDA_PCIE_FETCH_ERR)
> - * 6: PCIe discard error (PLDA_PCIE_DISCARD_ERR)
> - * 7: PCIe doorbell (PLDA_PCIE_DOORBELL)
> - * 8: 4 INTx interruts (PLDA_INTX)
> - * 9: MSI interrupt (PLDA_MSI)
> - * 10: AER event (PLDA_AER_EVENT)
> - * 11: PM/LTR/Hotplug (PLDA_MISC_EVENTS)
> - * 12: System error (PLDA_SYS_ERR)
> + * event bit
> + * 0-7 (0-7) DMA interrupt end : reserved for vendor implement
> + * 8-15 (8-15) DMA error : reserved for vendor implement
> + * 16 (16) AXI post error (PLDA_AXI_POST_ERR)
> + * 17 (17) AXI fetch error (PLDA_AXI_FETCH_ERR)
> + * 18 (18) AXI discard error (PLDA_AXI_DISCARD_ERR)
> + * 19 (19) AXI doorbell (PLDA_PCIE_DOORBELL)
> + * 20 (20) PCIe post error (PLDA_PCIE_POST_ERR)
> + * 21 (21) PCIe fetch error (PLDA_PCIE_FETCH_ERR)
> + * 22 (22) PCIe discard error (PLDA_PCIE_DISCARD_ERR)
> + * 23 (23) PCIe doorbell (PLDA_PCIE_DOORBELL)
> + * 24 (27-24) INTx interruts (PLDA_INTX)
> + * 25 (28): MSI interrupt (PLDA_MSI)
> + * 26 (29): AER event (PLDA_AER_EVENT)
> + * 27 (30): PM/LTR/Hotplug (PLDA_MISC_EVENTS)
> + * 28 (31): System error (PLDA_SYS_ERR)
> */
>
> struct plda_pcie_rp;
> @@ -155,6 +158,7 @@ struct plda_pcie_rp {
> raw_spinlock_t lock;
> struct plda_msi msi;
> const struct plda_event_ops *event_ops;
> + const struct irq_chip *event_irq_chip;
> void __iomem *bridge_addr;
> int num_events;
> };
> --
> 2.17.1
>
> This patchset final purpose is add PCIe driver for StarFive JH7110 SoC.
> JH7110 using PLDA XpressRICH PCIe IP. Microchip PolarFire Using the same IP
> and have commit their codes, which are mixed with PLDA controller codes and
> Microchip platform codes.
>
> For re-use the PLDA controller codes, I request refactoring microchip codes,
> move PLDA common codes to PLDA files.
> Desigware and Cadence is good example for refactoring codes.
>
> ----------------------------------------------------------
> The refactoring patches total number is 16,(patch 1-16) which do NOT contain
> changing logic of codes.
>
> These patches just contain three type basic operations.
> (rename, modify codes to support starfive platform, and moving to common file)
> If these patched are all be reviewed. They can be accepted first.
>
Hi Lorenzo Krzysztof ,Bjorn and other PCIe maintainer
Do you have any comment to patch 1-16? Hope patch 1-16(refactoring patches) ready
to merged first.
>
>
> >
> > As PLDA dts binding doc(Documentation/devicetree/bindings/pci/
> > plda,xpressrich3-axi-common.yaml) showed, PLDA PCIe contains an
> > interrupt controller.
> >
> > Microchip PolarFire PCIE event IRQs includes PLDA interrupts and
> > Polarfire additional interrupts. The interrupt irqchip ops includes
> > ack/mask/unmask interrupt ops, which will write correct registers.
> > Microchip Polarfire PCIe additional interrupts require to write
> > Polarfire SoC self-defined registers. So Microchip PCIe event irqchip ops can
> not be re-used.
> >
> > Microchip Polarfire PCIe additional intrerrupts:
> > (defined in drivers/pci/controller/plda/pcie-microchip-host.c)
> > EVENT_PCIE_L2_EXIT
> > EVENT_PCIE_HOTRST_EXIT
> > EVENT_PCIE_DLUP_EXIT
> > EVENT_SEC_TX_RAM_SEC_ERR
> > EVENT_SEC_RX_RAM_SEC_ERR
> > ....
> >
> > To support PLDA its own event IRQ process, implements PLDA irqchip ops
> > and add event irqchip field to struct pcie_plda_rp.
> >
>Hi Thomas
> Could you review this patch? Thanks.
>
Hi Thomas
Previous Lorrenzo ask you to review this patch. The PLDA PCIe interrupt register
can be seen in the patch.
All:
Sorry to resend this.
Minda
Hello,
> This patchset final purpose is add PCIe driver for StarFive JH7110 SoC.
> JH7110 using PLDA XpressRICH PCIe IP. Microchip PolarFire Using the
> same IP and have commit their codes, which are mixed with PLDA
> controller codes and Microchip platform codes.
>
> For re-use the PLDA controller codes, I request refactoring microchip
> codes, move PLDA common codes to PLDA files.
> Desigware and Cadence is good example for refactoring codes.
Applied to controller/microchip, thank you!
[01/21] dt-bindings: PCI: Add PLDA XpressRICH PCIe host common properties
https://git.kernel.org/pci/pci/c/0ce827c82eea
[02/21] dt-bindings: PCI: Add StarFive JH7110 PCIe controller
https://git.kernel.org/pci/pci/c/91b4524c9135
[03/21] PCI: Add PCIE_RESET_CONFIG_DEVICE_WAIT_MS waiting time value
https://git.kernel.org/pci/pci/c/4b83a1379e8c
[04/21] PCI: microchip: Move pcie-microchip-host.c to PLDA directory
https://git.kernel.org/pci/pci/c/ced442bf0124
[05/21] PCI: microchip: Move PLDA IP register macros to pcie-plda.h
https://git.kernel.org/pci/pci/c/571f57cc281c
[06/21] PCI: microchip: Add bridge_addr field to struct mc_pcie
https://git.kernel.org/pci/pci/c/73c9dcd35dd8
[07/21] PCI: microchip: Rename two PCIe data structures
https://git.kernel.org/pci/pci/c/e92d66e0aa1e
[08/08] PCI: microchip: Move PCIe host data structures to plda-pcie.h
https://git.kernel.org/pci/pci/c/79c0d7d53a51
[09/21] PCI: microchip: Rename two setup functions
https://git.kernel.org/pci/pci/c/082bda75f7b0
[10/21] PCI: microchip: Change the argument of plda_pcie_setup_iomems()
https://git.kernel.org/pci/pci/c/9251a0b72188
[11/21] PCI: microchip: Move setup functions to pcie-plda-host.c
https://git.kernel.org/pci/pci/c/047cc7da3a25
[12/21] PCI: microchip: Rename interrupt related functions
https://git.kernel.org/pci/pci/c/ddac0618211f
[13/21] PCI: microchip: Add num_events field to struct plda_pcie_rp
https://git.kernel.org/pci/pci/c/cb90f7f6145b
[14/21] PCI: microchip: Add request_event_irq() callback function
https://git.kernel.org/pci/pci/c/0ffbe1c70551
[15/21] PCI: microchip: Add INTx and MSI event num to struct plda_event
https://git.kernel.org/pci/pci/c/9932c5d45e5a
[16/21] PCI: microchip: Add get_events() callback and add PLDA get_event()
https://git.kernel.org/pci/pci/c/170407afbcc4
[17/21] PCI: microchip: Add event irqchip field to host port and add PLDA irqchip
https://git.kernel.org/pci/pci/c/5e33af45dbcb
[18/21] PCI: microchip: Move IRQ functions to pcie-plda-host.c
https://git.kernel.org/pci/pci/c/4e47aaf7afed
[19/21] PCI: plda: Add event bitmap field to struct plda_pcie_rp
https://git.kernel.org/pci/pci/c/008d2bc41e3c
[20/21] PCI: plda: Add host init/deinit and map bus functions
https://git.kernel.org/pci/pci/c/d86b148a401c
[21/21] PCI: starfive: Add JH7110 PCIe controller
https://git.kernel.org/pci/pci/c/e6e7b974e425
Krzysztof
On Thu, Mar 28, 2024 at 05:18:32PM +0800, Minda Chen wrote:
> Add StarFive JH7110 SoC PCIe controller dt-bindings. JH7110 using PLDA
> XpressRICH PCIe host controller IP.
>
> Signed-off-by: Minda Chen <[email protected]>
> Reviewed-by: Hal Feng <[email protected]>
> Reviewed-by: Conor Dooley <[email protected]>
> Reviewed-by: Rob Herring <[email protected]>
This really should have a Signed-off-by or an Acked-by from Kevin.
> +PCIE DRIVER FOR STARFIVE JH71x0
> +M: Kevin Xie <[email protected]>
> +L: [email protected]
> +S: Maintained
> +F: Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
The patch is OK, but the subject line is not very informative. It
should be useful all by itself even without the commit log. "Change
the argument of X" doesn't say anything about why we would want to do
that.
On Thu, Mar 28, 2024 at 05:18:21PM +0800, Minda Chen wrote:
> If other vendor do not select PCI_HOST_COMMON, the driver data is not
> struct pci_host_bridge.
Also, I don't think this is the real problem. Your
PCIE_MICROCHIP_HOST Kconfig selects PCI_HOST_COMMON, and the driver
calls pci_host_common_probe(), so the driver wouldn't even build
without PCI_HOST_COMMON.
This patch is already applied and ready to go, but if you can tell us
what's really going on here, I'd like to update the commit log.
> Move calling platform_get_drvdata() to mc_platform_init().
>
> Signed-off-by: Minda Chen <[email protected]>
> Reviewed-by: Conor Dooley <[email protected]>
> ---
> drivers/pci/controller/plda/pcie-microchip-host.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
> index 9b367927cd32..805870aed61d 100644
> --- a/drivers/pci/controller/plda/pcie-microchip-host.c
> +++ b/drivers/pci/controller/plda/pcie-microchip-host.c
> @@ -876,11 +876,10 @@ static void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
> writel(0, bridge_base_addr + ATR0_PCIE_WIN0_SRC_ADDR);
> }
>
> -static int plda_pcie_setup_iomems(struct platform_device *pdev,
> +static int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
> struct plda_pcie_rp *port)
> {
> void __iomem *bridge_base_addr = port->bridge_addr;
> - struct pci_host_bridge *bridge = platform_get_drvdata(pdev);
> struct resource_entry *entry;
> u64 pci_addr;
> u32 index = 1;
> @@ -1018,6 +1017,7 @@ static int mc_platform_init(struct pci_config_window *cfg)
> {
> struct device *dev = cfg->parent;
> struct platform_device *pdev = to_platform_device(dev);
> + struct pci_host_bridge *bridge = platform_get_drvdata(pdev);
> void __iomem *bridge_base_addr =
> port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
> int ret;
> @@ -1031,7 +1031,7 @@ static int mc_platform_init(struct pci_config_window *cfg)
> mc_pcie_enable_msi(port, cfg->win);
>
> /* Configure non-config space outbound ranges */
> - ret = plda_pcie_setup_iomems(pdev, &port->plda);
> + ret = plda_pcie_setup_iomems(bridge, &port->plda);
> if (ret)
> return ret;
>
> --
> 2.17.1
>
> Add StarFive JH7110 SoC PCIe controller dt-bindings. JH7110 using PLDA
> XpressRICH PCIe host controller IP.
>
> Signed-off-by: Minda Chen <[email protected]>
> Reviewed-by: Hal Feng <[email protected]>
> Reviewed-by: Conor Dooley <[email protected]>
> Reviewed-by: Rob Herring <[email protected]>
Acked-by: Kevin Xie <[email protected]>
> ---
> .../bindings/pci/starfive,jh7110-pcie.yaml | 120 ++++++++++++++++++
> MAINTAINERS | 6 +
> 2 files changed, 126 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
>
> The patch is OK, but the subject line is not very informative. It should be useful
> all by itself even without the commit log. "Change the argument of X" doesn't
> say anything about why we would want to do that.
>
> On Thu, Mar 28, 2024 at 05:18:21PM +0800, Minda Chen wrote:
> > If other vendor do not select PCI_HOST_COMMON, the driver data is not
> > struct pci_host_bridge.
>
> Also, I don't think this is the real problem. Your PCIE_MICROCHIP_HOST
> Kconfig selects PCI_HOST_COMMON, and the driver calls
> pci_host_common_probe(), so the driver wouldn't even build without
> PCI_HOST_COMMON.
>
> This patch is already applied and ready to go, but if you can tell us what's really
> going on here, I'd like to update the commit log.
>
It is modified for Starfive code. Starfive JH7110 PCIe do not select
PCI_HOST_COMMON
plda_pcie_setup_iomems() will be changed to common plda code.
I think I can modify the title and commit log like this.
Title:
PCI: microchip: Get struct pci_host_bridge pointer from platform code
Since plda_pcie_setup_iomems() will be a common PLDA core driver function, but the
argument0 is a struct platform_device pointer. plda_pcie_setup_iomems() actually
using struct pci_host_bridge pointer other than platform_device pointer. Further
more if a new PLDA core PCIe driver do not select PCI_HOST_COMMON, the platform
driver data is not struct pci_host_bridge pointer. So get struct pci_host_bridge pointer
from platform code function mc_platform_init() and make it to be an argument of
plda_pcie_setup_iomems().
> > Move calling platform_get_drvdata() to mc_platform_init().
> >
> > Signed-off-by: Minda Chen <[email protected]>
> > Reviewed-by: Conor Dooley <[email protected]>
> > ---
> > drivers/pci/controller/plda/pcie-microchip-host.c | 6 +++---
> > 1 file changed, 3 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c
> > b/drivers/pci/controller/plda/pcie-microchip-host.c
> > index 9b367927cd32..805870aed61d 100644
> > --- a/drivers/pci/controller/plda/pcie-microchip-host.c
> > +++ b/drivers/pci/controller/plda/pcie-microchip-host.c
> > @@ -876,11 +876,10 @@ static void plda_pcie_setup_window(void __iomem
> *bridge_base_addr, u32 index,
> > writel(0, bridge_base_addr + ATR0_PCIE_WIN0_SRC_ADDR); }
> >
> > -static int plda_pcie_setup_iomems(struct platform_device *pdev,
> > +static int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
> > struct plda_pcie_rp *port)
> > {
> > void __iomem *bridge_base_addr = port->bridge_addr;
> > - struct pci_host_bridge *bridge = platform_get_drvdata(pdev);
> > struct resource_entry *entry;
> > u64 pci_addr;
> > u32 index = 1;
> > @@ -1018,6 +1017,7 @@ static int mc_platform_init(struct
> > pci_config_window *cfg) {
> > struct device *dev = cfg->parent;
> > struct platform_device *pdev = to_platform_device(dev);
> > + struct pci_host_bridge *bridge = platform_get_drvdata(pdev);
> > void __iomem *bridge_base_addr =
> > port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
> > int ret;
> > @@ -1031,7 +1031,7 @@ static int mc_platform_init(struct
> pci_config_window *cfg)
> > mc_pcie_enable_msi(port, cfg->win);
> >
> > /* Configure non-config space outbound ranges */
> > - ret = plda_pcie_setup_iomems(pdev, &port->plda);
> > + ret = plda_pcie_setup_iomems(bridge, &port->plda);
> > if (ret)
> > return ret;
> >
> > --
> > 2.17.1
> >
On Wed, May 22, 2024 at 01:50:57AM +0000, Minda Chen wrote:
> > The patch is OK, but the subject line is not very informative. It
> > should be useful all by itself even without the commit log.
> > "Change the argument of X" doesn't say anything about why we would
> > want to do that.
> >
> > On Thu, Mar 28, 2024 at 05:18:21PM +0800, Minda Chen wrote:
> > > If other vendor do not select PCI_HOST_COMMON, the driver data is not
> > > struct pci_host_bridge.
> >
> > Also, I don't think this is the real problem. Your PCIE_MICROCHIP_HOST
> > Kconfig selects PCI_HOST_COMMON, and the driver calls
> > pci_host_common_probe(), so the driver wouldn't even build without
> > PCI_HOST_COMMON.
> >
> > This patch is already applied and ready to go, but if you can tell
> > us what's really going on here, I'd like to update the commit log.
> >
> It is modified for Starfive code. Starfive JH7110 PCIe do not select
> PCI_HOST_COMMON
> plda_pcie_setup_iomems() will be changed to common plda code.
>
> I think I can modify the title and commit log like this.
>
> Title:
> PCI: microchip: Get struct pci_host_bridge pointer from platform code
>
> Since plda_pcie_setup_iomems() will be a common PLDA core driver
> function, but the argument0 is a struct platform_device pointer.
> plda_pcie_setup_iomems() actually using struct pci_host_bridge
> pointer other than platform_device pointer. Further more if a new
> PLDA core PCIe driver do not select PCI_HOST_COMMON, the platform
> driver data is not struct pci_host_bridge pointer. So get struct
> pci_host_bridge pointer from platform code function
> mc_platform_init() and make it to be an argument of
> plda_pcie_setup_iomems().
OK, I see what you're doing. This actually has nothing to do with
whether PCI_HOST_COMMON is *enabled*. It has to do with whether
drivers use pci_host_common_probe(). Here's what I propose:
PCI: plda: Pass pci_host_bridge to plda_pcie_setup_iomems()
plda_pcie_setup_iomems() needs the bridge->windows list from struct
pci_host_bridge and is currently used only by pcie-microchip-host.c. This
driver uses pci_host_common_probe(), which sets a pci_host_bridge as the
drvdata, so plda_pcie_setup_iomems() used platform_get_drvdata() to find
the pci_host_bridge.
But we also want to use plda_pcie_setup_iomems() in the new pcie-starfive.c
driver, which does not use pci_host_common_probe() and will have struct
starfive_jh7110_pcie as its drvdata, so pass the pci_host_bridge directly
to plda_pcie_setup_iomems() so it doesn't need platform_get_drvdata() to
find it.
> > > Move calling platform_get_drvdata() to mc_platform_init().
> > >
> > > Signed-off-by: Minda Chen <[email protected]>
> > > Reviewed-by: Conor Dooley <[email protected]>
> > > ---
> > > drivers/pci/controller/plda/pcie-microchip-host.c | 6 +++---
> > > 1 file changed, 3 insertions(+), 3 deletions(-)
> > >
> > > diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c
> > > b/drivers/pci/controller/plda/pcie-microchip-host.c
> > > index 9b367927cd32..805870aed61d 100644
> > > --- a/drivers/pci/controller/plda/pcie-microchip-host.c
> > > +++ b/drivers/pci/controller/plda/pcie-microchip-host.c
> > > @@ -876,11 +876,10 @@ static void plda_pcie_setup_window(void __iomem
> > *bridge_base_addr, u32 index,
> > > writel(0, bridge_base_addr + ATR0_PCIE_WIN0_SRC_ADDR); }
> > >
> > > -static int plda_pcie_setup_iomems(struct platform_device *pdev,
> > > +static int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
> > > struct plda_pcie_rp *port)
> > > {
> > > void __iomem *bridge_base_addr = port->bridge_addr;
> > > - struct pci_host_bridge *bridge = platform_get_drvdata(pdev);
> > > struct resource_entry *entry;
> > > u64 pci_addr;
> > > u32 index = 1;
> > > @@ -1018,6 +1017,7 @@ static int mc_platform_init(struct
> > > pci_config_window *cfg) {
> > > struct device *dev = cfg->parent;
> > > struct platform_device *pdev = to_platform_device(dev);
> > > + struct pci_host_bridge *bridge = platform_get_drvdata(pdev);
> > > void __iomem *bridge_base_addr =
> > > port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
> > > int ret;
> > > @@ -1031,7 +1031,7 @@ static int mc_platform_init(struct
> > pci_config_window *cfg)
> > > mc_pcie_enable_msi(port, cfg->win);
> > >
> > > /* Configure non-config space outbound ranges */
> > > - ret = plda_pcie_setup_iomems(pdev, &port->plda);
> > > + ret = plda_pcie_setup_iomems(bridge, &port->plda);
> > > if (ret)
> > > return ret;
> > >
> > > --
> > > 2.17.1
> > >
>
> On Wed, May 22, 2024 at 01:50:57AM +0000, Minda Chen wrote:
> > > The patch is OK, but the subject line is not very informative. It
> > > should be useful all by itself even without the commit log.
> > > "Change the argument of X" doesn't say anything about why we would
> > > want to do that.
> > >
> > > On Thu, Mar 28, 2024 at 05:18:21PM +0800, Minda Chen wrote:
> > > > If other vendor do not select PCI_HOST_COMMON, the driver data is
> > > > not struct pci_host_bridge.
> > >
> > > Also, I don't think this is the real problem. Your
> > > PCIE_MICROCHIP_HOST Kconfig selects PCI_HOST_COMMON, and the
> driver
> > > calls pci_host_common_probe(), so the driver wouldn't even build
> > > without PCI_HOST_COMMON.
> > >
> > > This patch is already applied and ready to go, but if you can tell
> > > us what's really going on here, I'd like to update the commit log.
> > >
> > It is modified for Starfive code. Starfive JH7110 PCIe do not select
> > PCI_HOST_COMMON
> > plda_pcie_setup_iomems() will be changed to common plda code.
> >
> > I think I can modify the title and commit log like this.
> >
> > Title:
> > PCI: microchip: Get struct pci_host_bridge pointer from platform code
> >
> > Since plda_pcie_setup_iomems() will be a common PLDA core driver
> > function, but the argument0 is a struct platform_device pointer.
> > plda_pcie_setup_iomems() actually using struct pci_host_bridge pointer
> > other than platform_device pointer. Further more if a new PLDA core
> > PCIe driver do not select PCI_HOST_COMMON, the platform driver data is
> > not struct pci_host_bridge pointer. So get struct pci_host_bridge
> > pointer from platform code function
> > mc_platform_init() and make it to be an argument of
> > plda_pcie_setup_iomems().
>
> OK, I see what you're doing. This actually has nothing to do with whether
> PCI_HOST_COMMON is *enabled*. It has to do with whether drivers use
> pci_host_common_probe(). Here's what I propose:
>
> PCI: plda: Pass pci_host_bridge to plda_pcie_setup_iomems()
>
> plda_pcie_setup_iomems() needs the bridge->windows list from struct
> pci_host_bridge and is currently used only by pcie-microchip-host.c. This
> driver uses pci_host_common_probe(), which sets a pci_host_bridge as the
> drvdata, so plda_pcie_setup_iomems() used platform_get_drvdata() to find
> the pci_host_bridge.
>
> But we also want to use plda_pcie_setup_iomems() in the new pcie-starfive.c
> driver, which does not use pci_host_common_probe() and will have struct
> starfive_jh7110_pcie as its drvdata, so pass the pci_host_bridge directly
> to plda_pcie_setup_iomems() so it doesn't need platform_get_drvdata() to
> find it.
>
OK, Thanks.
I see PCIe 6.10 changed have been merged to main line.
Should I resend this patch set base on 6.10-rc1?
> > > > Move calling platform_get_drvdata() to mc_platform_init().
> > > >
> > > > Signed-off-by: Minda Chen <[email protected]>
> > > > Reviewed-by: Conor Dooley <[email protected]>
> > > > ---
> > > > drivers/pci/controller/plda/pcie-microchip-host.c | 6 +++---
> > > > 1 file changed, 3 insertions(+), 3 deletions(-)
> > > >
> > > > diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c
> > > > b/drivers/pci/controller/plda/pcie-microchip-host.c
> > > > index 9b367927cd32..805870aed61d 100644
> > > > --- a/drivers/pci/controller/plda/pcie-microchip-host.c
> > > > +++ b/drivers/pci/controller/plda/pcie-microchip-host.c
> > > > @@ -876,11 +876,10 @@ static void plda_pcie_setup_window(void
> > > > __iomem
> > > *bridge_base_addr, u32 index,
> > > > writel(0, bridge_base_addr + ATR0_PCIE_WIN0_SRC_ADDR); }
> > > >
> > > > -static int plda_pcie_setup_iomems(struct platform_device *pdev,
> > > > +static int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
> > > > struct plda_pcie_rp *port)
> > > > {
> > > > void __iomem *bridge_base_addr = port->bridge_addr;
> > > > - struct pci_host_bridge *bridge = platform_get_drvdata(pdev);
> > > > struct resource_entry *entry;
> > > > u64 pci_addr;
> > > > u32 index = 1;
> > > > @@ -1018,6 +1017,7 @@ static int mc_platform_init(struct
> > > > pci_config_window *cfg) {
> > > > struct device *dev = cfg->parent;
> > > > struct platform_device *pdev = to_platform_device(dev);
> > > > + struct pci_host_bridge *bridge = platform_get_drvdata(pdev);
> > > > void __iomem *bridge_base_addr =
> > > > port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
> > > > int ret;
> > > > @@ -1031,7 +1031,7 @@ static int mc_platform_init(struct
> > > pci_config_window *cfg)
> > > > mc_pcie_enable_msi(port, cfg->win);
> > > >
> > > > /* Configure non-config space outbound ranges */
> > > > - ret = plda_pcie_setup_iomems(pdev, &port->plda);
> > > > + ret = plda_pcie_setup_iomems(bridge, &port->plda);
> > > > if (ret)
> > > > return ret;
> > > >
> > > > --
> > > > 2.17.1
> > > >
On Thu, May 23, 2024 at 01:09:58AM +0000, Minda Chen wrote:
> > On Wed, May 22, 2024 at 01:50:57AM +0000, Minda Chen wrote:
> > > > The patch is OK, but the subject line is not very informative. It
> > > > should be useful all by itself even without the commit log.
> > > > "Change the argument of X" doesn't say anything about why we would
> > > > want to do that.
> > > >
> > > > On Thu, Mar 28, 2024 at 05:18:21PM +0800, Minda Chen wrote:
> > > > > If other vendor do not select PCI_HOST_COMMON, the driver data is
> > > > > not struct pci_host_bridge.
> > > >
> > > > Also, I don't think this is the real problem. Your
> > > > PCIE_MICROCHIP_HOST Kconfig selects PCI_HOST_COMMON, and the
> > driver
> > > > calls pci_host_common_probe(), so the driver wouldn't even build
> > > > without PCI_HOST_COMMON.
> > > >
> > > > This patch is already applied and ready to go, but if you can tell
> > > > us what's really going on here, I'd like to update the commit log.
> > > >
> > > It is modified for Starfive code. Starfive JH7110 PCIe do not select
> > > PCI_HOST_COMMON
> > > plda_pcie_setup_iomems() will be changed to common plda code.
> > >
> > > I think I can modify the title and commit log like this.
> > >
> > > Title:
> > > PCI: microchip: Get struct pci_host_bridge pointer from platform code
> > >
> > > Since plda_pcie_setup_iomems() will be a common PLDA core driver
> > > function, but the argument0 is a struct platform_device pointer.
> > > plda_pcie_setup_iomems() actually using struct pci_host_bridge pointer
> > > other than platform_device pointer. Further more if a new PLDA core
> > > PCIe driver do not select PCI_HOST_COMMON, the platform driver data is
> > > not struct pci_host_bridge pointer. So get struct pci_host_bridge
> > > pointer from platform code function
> > > mc_platform_init() and make it to be an argument of
> > > plda_pcie_setup_iomems().
> >
> > OK, I see what you're doing. This actually has nothing to do with whether
> > PCI_HOST_COMMON is *enabled*. It has to do with whether drivers use
> > pci_host_common_probe(). Here's what I propose:
> >
> > PCI: plda: Pass pci_host_bridge to plda_pcie_setup_iomems()
> >
> > plda_pcie_setup_iomems() needs the bridge->windows list from struct
> > pci_host_bridge and is currently used only by pcie-microchip-host.c. This
> > driver uses pci_host_common_probe(), which sets a pci_host_bridge as the
> > drvdata, so plda_pcie_setup_iomems() used platform_get_drvdata() to find
> > the pci_host_bridge.
> >
> > But we also want to use plda_pcie_setup_iomems() in the new pcie-starfive.c
> > driver, which does not use pci_host_common_probe() and will have struct
> > starfive_jh7110_pcie as its drvdata, so pass the pci_host_bridge directly
> > to plda_pcie_setup_iomems() so it doesn't need platform_get_drvdata() to
> > find it.
> >
> OK, Thanks.
>
> I see PCIe 6.10 changed have been merged to main line.
> Should I resend this patch set base on 6.10-rc1?
No need, I rebased it to f0bae243b2bc ("Merge tag 'pci-v6.10-changes'
of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci") already and
it will be a trivial rebase to v6.10-rc1 next week.
The current pci/controller/microchip branch is at:
https://git.kernel.org/pub/scm/linux/kernel/git/pci/pci.git/log/?h=ed261441e224
Let me know if anything is missing from there. I can't merge it into
linux-next until v6.10-rc1 is tagged, but as soon as it is, I'll put
it in linux-next.
> > > > > Move calling platform_get_drvdata() to mc_platform_init().
> > > > >
> > > > > Signed-off-by: Minda Chen <[email protected]>
> > > > > Reviewed-by: Conor Dooley <[email protected]>
> > > > > ---
> > > > > drivers/pci/controller/plda/pcie-microchip-host.c | 6 +++---
> > > > > 1 file changed, 3 insertions(+), 3 deletions(-)
> > > > >
> > > > > diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c
> > > > > b/drivers/pci/controller/plda/pcie-microchip-host.c
> > > > > index 9b367927cd32..805870aed61d 100644
> > > > > --- a/drivers/pci/controller/plda/pcie-microchip-host.c
> > > > > +++ b/drivers/pci/controller/plda/pcie-microchip-host.c
> > > > > @@ -876,11 +876,10 @@ static void plda_pcie_setup_window(void
> > > > > __iomem
> > > > *bridge_base_addr, u32 index,
> > > > > writel(0, bridge_base_addr + ATR0_PCIE_WIN0_SRC_ADDR); }
> > > > >
> > > > > -static int plda_pcie_setup_iomems(struct platform_device *pdev,
> > > > > +static int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
> > > > > struct plda_pcie_rp *port)
> > > > > {
> > > > > void __iomem *bridge_base_addr = port->bridge_addr;
> > > > > - struct pci_host_bridge *bridge = platform_get_drvdata(pdev);
> > > > > struct resource_entry *entry;
> > > > > u64 pci_addr;
> > > > > u32 index = 1;
> > > > > @@ -1018,6 +1017,7 @@ static int mc_platform_init(struct
> > > > > pci_config_window *cfg) {
> > > > > struct device *dev = cfg->parent;
> > > > > struct platform_device *pdev = to_platform_device(dev);
> > > > > + struct pci_host_bridge *bridge = platform_get_drvdata(pdev);
> > > > > void __iomem *bridge_base_addr =
> > > > > port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
> > > > > int ret;
> > > > > @@ -1031,7 +1031,7 @@ static int mc_platform_init(struct
> > > > pci_config_window *cfg)
> > > > > mc_pcie_enable_msi(port, cfg->win);
> > > > >
> > > > > /* Configure non-config space outbound ranges */
> > > > > - ret = plda_pcie_setup_iomems(pdev, &port->plda);
> > > > > + ret = plda_pcie_setup_iomems(bridge, &port->plda);
> > > > > if (ret)
> > > > > return ret;
> > > > >
> > > > > --
> > > > > 2.17.1
> > > > >
>
> On Thu, May 23, 2024 at 01:09:58AM +0000, Minda Chen wrote:
> > > On Wed, May 22, 2024 at 01:50:57AM +0000, Minda Chen wrote:
> > > > > The patch is OK, but the subject line is not very informative.
> > > > > It should be useful all by itself even without the commit log.
> > > > > "Change the argument of X" doesn't say anything about why we
> > > > > would want to do that.
> > > > >
> > > > > On Thu, Mar 28, 2024 at 05:18:21PM +0800, Minda Chen wrote:
> > > > > > If other vendor do not select PCI_HOST_COMMON, the driver data
> > > > > > is not struct pci_host_bridge.
> > > > >
> > > > > Also, I don't think this is the real problem. Your
> > > > > PCIE_MICROCHIP_HOST Kconfig selects PCI_HOST_COMMON, and the
> > > driver
> > > > > calls pci_host_common_probe(), so the driver wouldn't even build
> > > > > without PCI_HOST_COMMON.
> > > > >
> > > > > This patch is already applied and ready to go, but if you can
> > > > > tell us what's really going on here, I'd like to update the commit log.
> > > > >
> > > > It is modified for Starfive code. Starfive JH7110 PCIe do not
> > > > select PCI_HOST_COMMON
> > > > plda_pcie_setup_iomems() will be changed to common plda code.
> > > >
> > > > I think I can modify the title and commit log like this.
> > > >
> > > > Title:
> > > > PCI: microchip: Get struct pci_host_bridge pointer from platform
> > > > code
> > > >
> > > > Since plda_pcie_setup_iomems() will be a common PLDA core driver
> > > > function, but the argument0 is a struct platform_device pointer.
> > > > plda_pcie_setup_iomems() actually using struct pci_host_bridge
> > > > pointer other than platform_device pointer. Further more if a new
> > > > PLDA core PCIe driver do not select PCI_HOST_COMMON, the platform
> > > > driver data is not struct pci_host_bridge pointer. So get struct
> > > > pci_host_bridge pointer from platform code function
> > > > mc_platform_init() and make it to be an argument of
> > > > plda_pcie_setup_iomems().
> > >
> > > OK, I see what you're doing. This actually has nothing to do with
> > > whether PCI_HOST_COMMON is *enabled*. It has to do with whether
> > > drivers use pci_host_common_probe(). Here's what I propose:
> > >
> > > PCI: plda: Pass pci_host_bridge to plda_pcie_setup_iomems()
> > >
> > > plda_pcie_setup_iomems() needs the bridge->windows list from struct
> > > pci_host_bridge and is currently used only by pcie-microchip-host.c.
> This
> > > driver uses pci_host_common_probe(), which sets a pci_host_bridge as
> the
> > > drvdata, so plda_pcie_setup_iomems() used platform_get_drvdata() to
> find
> > > the pci_host_bridge.
> > >
> > > But we also want to use plda_pcie_setup_iomems() in the new
> pcie-starfive.c
> > > driver, which does not use pci_host_common_probe() and will have struct
> > > starfive_jh7110_pcie as its drvdata, so pass the pci_host_bridge directly
> > > to plda_pcie_setup_iomems() so it doesn't need platform_get_drvdata()
> to
> > > find it.
> > >
> > OK, Thanks.
> >
> > I see PCIe 6.10 changed have been merged to main line.
> > Should I resend this patch set base on 6.10-rc1?
>
> No need, I rebased it to f0bae243b2bc ("Merge tag 'pci-v6.10-changes'
> of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci") already and it will be a
> trivial rebase to v6.10-rc1 next week.
>
> The current pci/controller/microchip branch is at:
> https://git.kernel.org/pub/scm/linux/kernel/git/pci/pci.git/log/?h=ed261441e22
> 4
> Let me know if anything is missing from there. I can't merge it into linux-next
> until v6.10-rc1 is tagged, but as soon as it is, I'll put it in linux-next.
>
I have checked the code and tested it with Starfive VisionFive v2 board, PCIe can work.
All are Okay. Thanks for correct the commit message. It is more elegant.
This is precious experience of developing refactor code. Thank all!
Hi Conor
Thanks for help us for this patch set !
I see mars dts have been merged to mainline, this version dts patch can not be merged
I will resend the dts patch on v6.10-rc1.
On Thu, May 23, 2024 at 09:22:01AM +0000, Minda Chen wrote:
> Hi Conor
> Thanks for help us for this patch set !
> I see mars dts have been merged to mainline, this version dts patch can not be merged
> I will resend the dts patch on v6.10-rc1.
No worries, the dts patches in this series are long gone out of
patchwork anyway so I wouldn't have even tried to apply them ;)
Cheers,
Conor.