Convert the binding for McBSP controllers for TI SoCs from txt
to YAML schema.
Add properties 'clocks', 'clock-names', 'power-domains' and
'#sound-dai-cells' which were missing from the txt file.
Add '#sound-dai-cells' and 'clocks' in the example which were missing
from the txt file.
Signed-off-by: Bastien Curutchet <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---
.../bindings/sound/davinci-mcbsp.txt | 50 ----------
.../bindings/sound/davinci-mcbsp.yaml | 95 +++++++++++++++++++
2 files changed, 95 insertions(+), 50 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/davinci-mcbsp.txt
create mode 100644 Documentation/devicetree/bindings/sound/davinci-mcbsp.yaml
diff --git a/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt b/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt
deleted file mode 100644
index 3ffc2562fb31..000000000000
--- a/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-Texas Instruments DaVinci McBSP module
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-This binding describes the "Multi-channel Buffered Serial Port" (McBSP)
-audio interface found in some TI DaVinci processors like the OMAP-L138 or AM180x.
-
-
-Required properties:
-~~~~~~~~~~~~~~~~~~~~
-- compatible :
- "ti,da850-mcbsp" : for DA850, AM180x and OPAM-L138 platforms
-
-- reg : physical base address and length of the controller memory mapped
- region(s).
-- reg-names : Should contain:
- * "mpu" for the main registers (required).
- * "dat" for the data FIFO (optional).
-
-- dmas: three element list of DMA controller phandles, DMA request line and
- TC channel ordered triplets.
-- dma-names: identifier string for each DMA request line in the dmas property.
- These strings correspond 1:1 with the ordered pairs in dmas. The dma
- identifiers must be "rx" and "tx".
-
-Optional properties:
-~~~~~~~~~~~~~~~~~~~~
-- interrupts : Interrupt numbers for McBSP
-- interrupt-names : Known interrupt names are "rx" and "tx"
-
-- pinctrl-0: Should specify pin control group used for this controller.
-- pinctrl-names: Should contain only one value - "default", for more details
- please refer to pinctrl-bindings.txt
-
-Example (AM1808):
-~~~~~~~~~~~~~~~~~
-
-mcbsp0: mcbsp@1d10000 {
- compatible = "ti,da850-mcbsp";
- pinctrl-names = "default";
- pinctrl-0 = <&mcbsp0_pins>;
-
- reg = <0x00110000 0x1000>,
- <0x00310000 0x1000>;
- reg-names = "mpu", "dat";
- interrupts = <97 98>;
- interrupt-names = "rx", "tx";
- dmas = <&edma0 3 1
- &edma0 2 1>;
- dma-names = "tx", "rx";
-};
diff --git a/Documentation/devicetree/bindings/sound/davinci-mcbsp.yaml b/Documentation/devicetree/bindings/sound/davinci-mcbsp.yaml
new file mode 100644
index 000000000000..139b594dd192
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/davinci-mcbsp.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/davinci-mcbsp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: McBSP Controller for TI SoCs
+
+maintainers:
+ - Bastien Curutchet <[email protected]>
+
+allOf:
+ - $ref: dai-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - ti,da850-mcbsp
+
+ reg:
+ minItems: 1
+ items:
+ - description: CFG registers
+ - description: data registers
+
+ reg-names:
+ minItems: 1
+ items:
+ - const: mpu
+ - const: dat
+
+ dmas:
+ items:
+ - description: transmission DMA channel
+ - description: reception DMA channel
+
+ dma-names:
+ items:
+ - const: tx
+ - const: rx
+
+ interrupts:
+ items:
+ - description: RX interrupt
+ - description: TX interrupt
+
+ interrupt-names:
+ items:
+ - const: rx
+ - const: tx
+
+ clocks:
+ items:
+ - description: functional clock
+
+ clock-names:
+ items:
+ - const: fck
+
+ power-domains:
+ maxItems: 1
+
+ "#sound-dai-cells":
+ const: 0
+
+required:
+ - "#sound-dai-cells"
+ - compatible
+ - reg
+ - reg-names
+ - dmas
+ - dma-names
+ - clocks
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ mcbsp0@1d10000 {
+ #sound-dai-cells = <0>;
+ compatible = "ti,da850-mcbsp";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp0_pins>;
+
+ reg = <0x111000 0x1000>,
+ <0x311000 0x1000>;
+ reg-names = "mpu", "dat";
+ interrupts = <97>, <98>;
+ interrupt-names = "rx", "tx";
+ dmas = <&edma0 3 1>,
+ <&edma0 2 1>;
+ dma-names = "tx", "rx";
+
+ clocks = <&psc1 14>;
+ };
--
2.44.0