Init priority to queue mapping in the way as it shown in IEEE 802.1Q
mapping example.
Signed-off-by: Oleksij Rempel <[email protected]>
---
changes v2:
- s/ksz_set_default_prio_queue_mapping/ksz9477_set_default_prio_queue_mapping
- remove error on queue < 0.
---
drivers/net/dsa/microchip/ksz_common.c | 57 +++++++++++++++-----------
1 file changed, 33 insertions(+), 24 deletions(-)
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 08426f85f7707..3dec90cfaf5de 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -24,6 +24,7 @@
#include <linux/of_net.h>
#include <linux/micrel_phy.h>
#include <net/dsa.h>
+#include <net/ieee8021q.h>
#include <net/pkt_cls.h>
#include <net/switchdev.h>
@@ -2692,9 +2693,33 @@ static int ksz_port_mdb_del(struct dsa_switch *ds, int port,
return dev->dev_ops->mdb_del(dev, port, mdb, db);
}
+static int ksz9477_set_default_prio_queue_mapping(struct ksz_device *dev,
+ int port)
+{
+ u32 queue_map = 0;
+ int ipv;
+
+ for (ipv = 0; ipv < dev->info->max_ipvs; ipv++) {
+ int queue;
+
+ /* Traffic Type (TT) is corresponding to the Internal Priority
+ * Value (IPV) in the switch. Traffic Class (TC) is
+ * corresponding to the queue in the switch.
+ */
+ queue = ieee8021q_tt_to_tc(ipv, dev->info->num_tx_queues);
+ if (queue < 0)
+ return queue;
+
+ queue_map |= queue << (ipv * KSZ9477_PORT_TC_MAP_S);
+ }
+
+ return ksz_pwrite32(dev, port, KSZ9477_PORT_MRI_TC_MAP__4, queue_map);
+}
+
static int ksz_port_setup(struct dsa_switch *ds, int port)
{
struct ksz_device *dev = ds->priv;
+ int ret;
if (!dsa_is_user_port(ds, port))
return 0;
@@ -2702,6 +2727,12 @@ static int ksz_port_setup(struct dsa_switch *ds, int port)
/* setup user port */
dev->dev_ops->port_setup(dev, port, false);
+ if (!is_ksz8(dev)) {
+ ret = ksz9477_set_default_prio_queue_mapping(dev, port);
+ if (ret)
+ return ret;
+ }
+
/* port_stp_state_set() will be called after to enable the port so
* there is no need to do anything.
*/
@@ -3566,8 +3597,7 @@ static int ksz_tc_ets_add(struct ksz_device *dev, int port,
static int ksz_tc_ets_del(struct ksz_device *dev, int port)
{
- int ret, queue, tc_prio, s;
- u32 queue_map = 0;
+ int ret, queue;
/* To restore the default chip configuration, set all queues to use the
* WRR scheduler with a weight of 1.
@@ -3579,31 +3609,10 @@ static int ksz_tc_ets_del(struct ksz_device *dev, int port)
return ret;
}
- switch (dev->info->num_tx_queues) {
- case 2:
- s = 2;
- break;
- case 4:
- s = 1;
- break;
- case 8:
- s = 0;
- break;
- default:
- return -EINVAL;
- }
-
/* Revert the queue mapping for TC-priority to its default setting on
* the chip.
*/
- for (tc_prio = 0; tc_prio < dev->info->max_ipvs; tc_prio++) {
- int queue;
-
- queue = tc_prio >> s;
- queue_map |= queue << (tc_prio * KSZ9477_PORT_TC_MAP_S);
- }
-
- return ksz_pwrite32(dev, port, KSZ9477_PORT_MRI_TC_MAP__4, queue_map);
+ return ksz9477_set_default_prio_queue_mapping(dev, port);
}
static int ksz_tc_ets_validate(struct ksz_device *dev, int port,
--
2.39.2