- removed extraneous new line
- removed pcie_1_phy_aux_clk
- removed extranous pcie1
This documents and add intial dts support for Samsung Galaxy Z Fold5 (samsung,q5q)
which is a foldable phone by Samsung based on the sm8550 SoC.
Currently working features:
- Framebuffer
- UFS
- i2c
- Buttons
Signed-off-by: Alexandru Marc Serdeliuc <[email protected]>
---
Alexandru Marc Serdeliuc (2):
dt-bindings: arm: qcom: Document the Samsung Galaxy Z Fold5
arm64: dts: qcom: sm8550: Add support for Samsung Galaxy Z Fold5
Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts | 593 ++++++++++++++++++++++++
3 files changed, 595 insertions(+)
---
base-commit: 39cd87c4eb2b893354f3b850f916353f2658ae6f
change-id: 20240407-samsung-galaxy-zfold5-q5q-ab1fdb3df966
Best regards,
--
Alexandru Marc Serdeliuc <[email protected]>
From: Alexandru Marc Serdeliuc <[email protected]>
This documents Samsung Galaxy Z Fold5 (samsung,q5q)
which is a foldable phone by Samsung based on the sm8550 SoC.
Signed-off-by: Alexandru Marc Serdeliuc <[email protected]>
---
Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 66beaac60e1d..dea2a23b8fc2 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -1003,6 +1003,7 @@ properties:
- qcom,sm8550-hdk
- qcom,sm8550-mtp
- qcom,sm8550-qrd
+ - samsung,q5q
- const: qcom,sm8550
- items:
--
2.34.1
From: Alexandru Marc Serdeliuc <[email protected]>
Add support for Samsung Galaxy Z Fold5 (q5q) foldable phone based on sm8550
Currently working features:
- Framebuffer
- UFS
- i2c
- Buttons
Signed-off-by: Alexandru Marc Serdeliuc <[email protected]>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts | 593 ++++++++++++++++++++++++
2 files changed, 594 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 7d40ec5e7d21..a7503fd35b6c 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -241,6 +241,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx224.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8550-hdk.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8550-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8550-qrd.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm8550-samsung-q5q.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8650-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8650-qrd.dtb
dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts b/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts
new file mode 100644
index 000000000000..4654ae1364ba
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts
@@ -0,0 +1,593 @@
+// SPDX-License-cdsp_memIdentifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024, Alexandru Marc Serdeliuc <[email protected]>
+ * Copyright (c) 2024, David Wronek <[email protected]>
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8550.dtsi"
+#include "pm8550.dtsi"
+#include "pm8550vs.dtsi"
+#include "pmk8550.dtsi"
+
+/delete-node/ &adspslpi_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &mpss_dsm_mem;
+/delete-node/ &mpss_mem;
+/delete-node/ &rmtfs_mem;
+
+/ {
+ model = "Samsung Galaxy Z Fold5";
+ compatible = "samsung,q5q", "qcom,sm8550";
+ chassis-type = "handset";
+
+ aliases {
+ serial0 = &uart7;
+ };
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ framebuffer: framebuffer@b8000000 {
+ compatible = "simple-framebuffer";
+ reg = <0x0 0xb8000000 0x0 0x2b00000>;
+ width = <2176>;
+ height = <1812>;
+ stride = <(2176 * 4)>;
+ format = "a8r8g8b8";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&volume_up_n>;
+ pinctrl-names = "default";
+
+ key-volume-up {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ wakeup-source;
+ };
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reserved-memory {
+ adspslpi_mem: adspslpi@9ea00000 {
+ reg = <0x0 0x9ea00000 0x0 0x59b4000>;
+ no-map;
+ };
+
+ cdsp_mem: cdsp-region@9c900000 {
+ reg = <0 0x9c900000 0 0x2000000>;
+ no-map;
+ };
+
+ mpss_dsm_mem: mpss-dsm@d4d00000 {
+ reg = <0x0 0xd4d00000 0x0 0x3300000>;
+ no-map;
+ };
+
+ mpss_mem: mpss@8b400000 {
+ reg = <0x0 0x8b400000 0x0 0xfc00000>;
+ no-map;
+ };
+
+ rmtfs_mem: rmtfs-region@d4a80000 {
+ reg = <0x0 0xd4a80000 0x0 0x280000>;
+ no-map;
+ };
+
+ /*
+ * The bootloader will only keep display hardware enabled
+ * if this memory region is named exactly 'splash_region'
+ */
+ splash_region@b8000000 {
+ reg = <0x0 0xb8000000 0x0 0x2b00000>;
+ no-map;
+ };
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm8550-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vreg_bob1: bob1 {
+ regulator-name = "vreg_bob1";
+ regulator-min-microvolt = <3296000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_bob2: bob2 {
+ regulator-name = "vreg_bob2";
+ regulator-min-microvolt = <2720000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1b_1p8: ldo1 {
+ regulator-name = "vreg_l1b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2b_3p0: ldo2 {
+ regulator-name = "vreg_l2b_3p0";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5b_3p1: ldo5 {
+ regulator-name = "vreg_l5b_3p1";
+ regulator-min-microvolt = <3104000>;
+ regulator-max-microvolt = <3104000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6b_1p8: ldo6 {
+ regulator-name = "vreg_l6b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7b_1p8: ldo7 {
+ regulator-name = "vreg_l7b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8b_1p8: ldo8 {
+ regulator-name = "vreg_l8b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9b_2p9: ldo9 {
+ regulator-name = "vreg_l9b_2p9";
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11b_1p2: ldo11 {
+ regulator-name = "vreg_l11b_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1504000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12b_1p8: ldo12 {
+ regulator-name = "vreg_l12b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13b_3p0: ldo13 {
+ regulator-name = "vreg_l13b_3p0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14b_3p2: ldo14 {
+ regulator-name = "vreg_l14b_3p2";
+ regulator-min-microvolt = <3200000>;
+ regulator-max-microvolt = <3200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15b_1p8: ldo15 {
+ regulator-name = "vreg_l15b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
+ };
+
+ vreg_l16b_2p8: ldo16 {
+ regulator-name = "vreg_l16b_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17b_2p5: ldo17 {
+ regulator-name = "vreg_l17b_2p5";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2504000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vreg_l3c_0p91: ldo3 {
+ regulator-name = "vreg_l3c_0p9";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-2 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+ qcom,pmic-id = "d";
+
+ vreg_l1d_0p88: ldo1 {
+ regulator-name = "vreg_l1d_0p88";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-3 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+ qcom,pmic-id = "e";
+
+ vreg_s4e_0p9: smps4 {
+ regulator-name = "vreg_s4e_0p9";
+ regulator-min-microvolt = <904000>;
+ regulator-max-microvolt = <984000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s5e_1p1: smps5 {
+ regulator-name = "vreg_s5e_1p1";
+ regulator-min-microvolt = <1080000>;
+ regulator-max-microvolt = <1120000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1e_0p88: ldo1 {
+ regulator-name = "vreg_l1e_0p88";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2e_0p9: ldo2 {
+ regulator-name = "vreg_l2e_0p9";
+ regulator-min-microvolt = <904000>;
+ regulator-max-microvolt = <970000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3e_1p2: ldo3 {
+ regulator-name = "vreg_l3e_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-4 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "f";
+
+ vreg_s4f_0p5: smps4 {
+ regulator-name = "vreg_s4f_0p5";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <700000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1f_0p9: ldo1 {
+ regulator-name = "vreg_l1f_0p9";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2f_0p88: ldo2 {
+ regulator-name = "vreg_l2f_0p88";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3f_0p91: ldo3 {
+ regulator-name = "vreg_l3f_0p91";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-5 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+ qcom,pmic-id = "g";
+
+ vreg_s1g_1p2: smps1 {
+ regulator-name = "vreg_s1g_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s2g_0p8: smps2 {
+ regulator-name = "vreg_s2g_0p8";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s3g_0p7: smps3 {
+ regulator-name = "vreg_s3g_0p7";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1004000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s4g_1p3: smps4 {
+ regulator-name = "vreg_s4g_1p3";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1352000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s5g_0p8: smps5 {
+ regulator-name = "vreg_s5g_0p8";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1004000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s6g_1p8: smps6 {
+ regulator-name = "vreg_s6g_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1g_1p2: ldo1 {
+ regulator-name = "vreg_l1g_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2g_1p2: ldo2 {
+ regulator-name = "vreg_l2g_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3g_1p2: ldo3 {
+ regulator-name = "vreg_l3g_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-6 {
+ compatible = "qcom,pm8010-rpmh-regulators";
+ qcom,pmic-id = "m";
+
+ vreg_l1m_1p056: ldo1 {
+ regulator-name = "vreg_l1m_1p056";
+ regulator-min-microvolt = <1056000>;
+ regulator-max-microvolt = <1056000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2m_1p056: ldo2 {
+ regulator-name = "vreg_l2m_1p056";
+ regulator-min-microvolt = <1056000>;
+ regulator-max-microvolt = <1056000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3m_2p8: ldo3 {
+ regulator-name = "vreg_l3m_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4m_2p8: ldo4 {
+ regulator-name = "vreg_l4m_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5m_1p8: ldo5 {
+ regulator-name = "vreg_l5m_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6m_1p8: ldo6 {
+ regulator-name = "vreg_l6m_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7m_2p9: ldo7 {
+ regulator-name = "vreg_l7m_2p9";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2904000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-7 {
+ compatible = "qcom,pm8010-rpmh-regulators";
+ qcom,pmic-id = "n";
+
+ vreg_l1n_1p1: ldo1 {
+ regulator-name = "vreg_l1n_1p1";
+ regulator-min-microvolt = <1104000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2n_1p1: ldo2 {
+ regulator-name = "vreg_l2n_1p1";
+ regulator-min-microvolt = <1104000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3n_2p8: ldo3 {
+ regulator-name = "vreg_l3n_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4n_2p8: ldo4 {
+ regulator-name = "vreg_l4n_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5n_1p8: ldo5 {
+ regulator-name = "vreg_l5n_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6n_3p3: ldo6 {
+ regulator-name = "vreg_l6n_3p3";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7n_2p96: ldo7 {
+ regulator-name = "vreg_l7n_2p96";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&dispcc {
+ status = "disabled";
+};
+
+&i2c_master_hub_0 {
+ status = "okay";
+};
+
+&pcie0 {
+ wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+ perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&pcie0_default_state>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&pcie0_phy {
+ vdda-phy-supply = <&vreg_l1e_0p88>;
+ vdda-pll-supply = <&vreg_l3e_1p2>;
+ status = "okay";
+};
+
+&pm8550_gpios {
+ volume_up_n: volume-up-n-state {
+ pins = "gpio6";
+ function = "normal";
+ power-source = <1>;
+ bias-pull-up;
+ input-enable;
+ };
+};
+
+&pon_pwrkey {
+ status = "okay";
+};
+
+&pon_resin {
+ status = "okay";
+ linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/sm8550/adsp.mdt",
+ "qcom/sm8550/adsp_dtb.mdt";
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/sm8550/cdsp.mdt",
+ "qcom/sm8550/cdsp_dtb.mdt";
+ status = "okay";
+};
+
+&remoteproc_mpss {
+ firmware-name = "qcom/sm8550/modem.mdt",
+ "qcom/sm8550/modem_dtb.mdt";
+ status = "okay";
+};
+
+&sleep_clk {
+ clock-frequency = <32000>;
+};
+
+&tlmm {
+ gpio-reserved-ranges = <36 4>, <50 2>;
+};
+
+&ufs_mem_hc {
+ reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+ vcc-supply = <&vreg_l17b_2p5>;
+ vcc-max-microamp = <1300000>;
+ vccq-supply = <&vreg_l1g_1p2>;
+ vccq-max-microamp = <1200000>;
+ vdd-hba-supply = <&vreg_l3g_1p2>;
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vreg_l1d_0p88>;
+ vdda-pll-supply = <&vreg_l3e_1p2>;
+ status = "okay";
+};
+
+&xo_board {
+ clock-frequency = <76800000>;
+};
--
2.34.1
On 07/04/2024 07:38, Alexandru Marc Serdeliuc via B4 Relay wrote:
> From: Alexandru Marc Serdeliuc <[email protected]>
>
> This documents Samsung Galaxy Z Fold5 (samsung,q5q)
> which is a foldable phone by Samsung based on the sm8550 SoC.
>
> Signed-off-by: Alexandru Marc Serdeliuc <[email protected]>
> ---
This is a friendly reminder during the review process.
It looks like you received a tag and forgot to add it.
If you do not know the process, here is a short explanation:
Please add Acked-by/Reviewed-by/Tested-by tags when posting new
versions, under or above your Signed-off-by tag. Tag is "received", when
provided in a message replied to you on the mailing list. Tools like b4
can help here. However, there's no need to repost patches *only* to add
the tags. The upstream maintainer will do that for tags received on the
version they apply.
https://elixir.bootlin.com/linux/v6.5-rc3/source/Documentation/process/submitting-patches.rst#L577
If a tag was not added on purpose, please state why and what changed.
Best regards,
Krzysztof
On 07/04/2024 07:38, Alexandru Marc Serdeliuc via B4 Relay wrote:
> From: Alexandru Marc Serdeliuc <[email protected]>
>
> Add support for Samsung Galaxy Z Fold5 (q5q) foldable phone based on sm8550
>
> Currently working features:
> - Framebuffer
> - UFS
> - i2c
> - Buttons
>
> Signed-off-by: Alexandru Marc Serdeliuc <[email protected]>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
Where is the changelog? This is v4 and nothing (neither here nor in
cover letter) explained what was happening with this patchset.
Tags were ignored, so maybe comments as well?
Please provide *full* and detailed changelog.
Best regards,
Krzysztof
I am terribly sorry, this is my first patch sent here, I am still
trying to understand what and how to do it.
How to proceed with those missing tags? i should create a v5 and add them?
On 7/4/24 11:01, Krzysztof Kozlowski wrote:
> On 07/04/2024 07:38, Alexandru Marc Serdeliuc via B4 Relay wrote:
>> From: Alexandru Marc Serdeliuc <[email protected]>
>>
>> This documents Samsung Galaxy Z Fold5 (samsung,q5q)
>> which is a foldable phone by Samsung based on the sm8550 SoC.
>>
>> Signed-off-by: Alexandru Marc Serdeliuc <[email protected]>
>> ---
> This is a friendly reminder during the review process.
>
> It looks like you received a tag and forgot to add it.
>
> If you do not know the process, here is a short explanation:
> Please add Acked-by/Reviewed-by/Tested-by tags when posting new
> versions, under or above your Signed-off-by tag. Tag is "received", when
> provided in a message replied to you on the mailing list. Tools like b4
> can help here. However, there's no need to repost patches *only* to add
> the tags. The upstream maintainer will do that for tags received on the
> version they apply.
>
> https://elixir.bootlin.com/linux/v6.5-rc3/source/Documentation/process/submitting-patches.rst#L577
>
> If a tag was not added on purpose, please state why and what changed.
>
> Best regards,
> Krzysztof
>
Hi, please excuse my lack of knowledge, I am still trying to figure out
how to properly send a patch. Hopefully not wasting your time too much.
Here is what was changed, or I should send a v5 and add the
modifications to cover letter?
- v4
. removed a spurious new line
. removed pcie_1_phy_aux_clk as requested
. removed secondary pcie1 which does not exists on the device
. changed firmware extension from .mbn to .mdt
. added missing reserved memory regions required by firmware to
properly load
- v3
. added b4 version 3
. removed address and size cells in device description
- v2 added both but added an extra v2 in the subject line instead to b4
subject header, was requested to send the patch again, along with
following mods:
. removed whole bootargs line
. fixed underscores in reserved memory by removing all reserved
memory regions
. added missing idetation to spash_screen remark
. validated the dts with "dtbs_check"
. removed all comments at the end of nodes
. moved status of the node at the end of the node
. reversed pin control name with control numbers
. ordered the nodes alphabetically
- The initial request was split in two patches sent due to the following
checkpatch warning, was requested to re send them together:
WARNING: DT binding docs and includes should be a separate patch. See:
Documentation/devicetree/bindings/submitting-patches.rst
On 7/4/24 11:03, Krzysztof Kozlowski wrote:
> On 07/04/2024 07:38, Alexandru Marc Serdeliuc via B4 Relay wrote:
>> From: Alexandru Marc Serdeliuc <[email protected]>
>>
>> Add support for Samsung Galaxy Z Fold5 (q5q) foldable phone based on sm8550
>>
>> Currently working features:
>> - Framebuffer
>> - UFS
>> - i2c
>> - Buttons
>>
>> Signed-off-by: Alexandru Marc Serdeliuc <[email protected]>
>> ---
>> arch/arm64/boot/dts/qcom/Makefile | 1 +
> Where is the changelog? This is v4 and nothing (neither here nor in
> cover letter) explained what was happening with this patchset.
>
> Tags were ignored, so maybe comments as well?
>
> Please provide *full* and detailed changelog.
>
> Best regards,
> Krzysztof
>
On 07/04/2024 11:21, Alexandru Serdeliuc wrote:
> I am terribly sorry, this is my first patch sent here, I am still
> trying to understand what and how to do it.
>
> How to proceed with those missing tags? i should create a v5 and add them?
>
You need to add them. Please read the document I linked.
Best regards,
Krzysztof
On Sun, 07 Apr 2024 07:38:12 +0200, Alexandru Marc Serdeliuc wrote:
> - removed extraneous new line
> - removed pcie_1_phy_aux_clk
> - removed extranous pcie1
>
> This documents and add intial dts support for Samsung Galaxy Z Fold5 (samsung,q5q)
> which is a foldable phone by Samsung based on the sm8550 SoC.
>
> Currently working features:
> - Framebuffer
> - UFS
> - i2c
> - Buttons
>
> Signed-off-by: Alexandru Marc Serdeliuc <[email protected]>
> ---
> Alexandru Marc Serdeliuc (2):
> dt-bindings: arm: qcom: Document the Samsung Galaxy Z Fold5
> arm64: dts: qcom: sm8550: Add support for Samsung Galaxy Z Fold5
>
> Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts | 593 ++++++++++++++++++++++++
> 3 files changed, 595 insertions(+)
> ---
> base-commit: 39cd87c4eb2b893354f3b850f916353f2658ae6f
> change-id: 20240407-samsung-galaxy-zfold5-q5q-ab1fdb3df966
>
> Best regards,
> --
> Alexandru Marc Serdeliuc <[email protected]>
>
>
>
My bot found new DTB warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
New warnings running 'make CHECK_DTBS=y qcom/sm8550-samsung-q5q.dtb' for [email protected]:
arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dtb: pcie-1-phy-aux-clk: 'clock-frequency' is a required property
from schema $id: http://devicetree.org/schemas/clock/fixed-clock.yaml#
arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dtb: phy@1c0e000: clock-output-names: ['pcie1_pipe_clk'] is too short
from schema $id: http://devicetree.org/schemas/phy/qcom,sc8280xp-qmp-pcie-phy.yaml#
arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dtb: phy@1c0e000: #clock-cells:0:0: 1 was expected
from schema $id: http://devicetree.org/schemas/phy/qcom,sc8280xp-qmp-pcie-phy.yaml#
Hi!
> - removed extraneous new line
> - removed pcie_1_phy_aux_clk
> - removed extranous pcie1
>
> This documents and add intial dts support for Samsung Galaxy Z Fold5 (samsung,q5q)
> which is a foldable phone by Samsung based on the sm8550 SoC.
>
> Currently working features:
> - Framebuffer
> - UFS
> - i2c
> - Buttons
Interesting, folding will be fun to play with.
Please cc [email protected] with phone patches.
Best regards,
Pavel
--
People of Russia, stop Putin before his war on Ukraine escalates.