Power event IRQ is used for wakeup in cases:
a) where the controller is super speed capable and missing an
ss_phy interrupt.
b) where the GIC is not capable of detecting DP/DM hs phy irq's.
Power event IRQ stat register indicates whether high speed phy
entered and exited L2 successfully during suspend and resume.
Indicate the same for all ports of multiport.
Signed-off-by: Krishna Kurapati <[email protected]>
Reviewed-by: Johan Hovold <[email protected]>
---
drivers/usb/dwc3/dwc3-qcom.c | 22 +++++++++++++++++-----
1 file changed, 17 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index 12182e0f8f45..d3e6d5d5e8bf 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -52,6 +52,13 @@
#define APPS_USB_AVG_BW 0
#define APPS_USB_PEAK_BW MBps_to_icc(40)
+static const u32 pwr_evnt_irq_stat_reg[DWC3_MAX_PORTS] = {
+ 0x58,
+ 0x1dc,
+ 0x228,
+ 0x238,
+};
+
struct dwc3_qcom_port {
int qusb2_phy_irq;
int dp_hs_phy_irq;
@@ -421,9 +428,11 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
if (qcom->is_suspended)
return 0;
- val = readl(qcom->qscratch_base + PWR_EVNT_IRQ_STAT_REG);
- if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
- dev_err(qcom->dev, "HS-PHY not in L2\n");
+ for (i = 0; i < qcom->num_ports; i++) {
+ val = readl(qcom->qscratch_base + pwr_evnt_irq_stat_reg[i]);
+ if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
+ dev_err(qcom->dev, "port-%d HS-PHY not in L2\n", i + 1);
+ }
for (i = qcom->num_clocks - 1; i >= 0; i--)
clk_disable_unprepare(qcom->clks[i]);
@@ -472,8 +481,11 @@ static int dwc3_qcom_resume(struct dwc3_qcom *qcom, bool wakeup)
dev_warn(qcom->dev, "failed to enable interconnect: %d\n", ret);
/* Clear existing events from PHY related to L2 in/out */
- dwc3_qcom_setbits(qcom->qscratch_base, PWR_EVNT_IRQ_STAT_REG,
- PWR_EVNT_LPM_IN_L2_MASK | PWR_EVNT_LPM_OUT_L2_MASK);
+ for (i = 0; i < qcom->num_ports; i++) {
+ dwc3_qcom_setbits(qcom->qscratch_base,
+ pwr_evnt_irq_stat_reg[i],
+ PWR_EVNT_LPM_IN_L2_MASK | PWR_EVNT_LPM_OUT_L2_MASK);
+ }
qcom->is_suspended = false;
--
2.34.1
On Mon, Apr 08, 2024, Krishna Kurapati wrote:
> Power event IRQ is used for wakeup in cases:
> a) where the controller is super speed capable and missing an
> ss_phy interrupt.
> b) where the GIC is not capable of detecting DP/DM hs phy irq's.
>
> Power event IRQ stat register indicates whether high speed phy
> entered and exited L2 successfully during suspend and resume.
> Indicate the same for all ports of multiport.
>
> Signed-off-by: Krishna Kurapati <[email protected]>
> Reviewed-by: Johan Hovold <[email protected]>
> ---
> drivers/usb/dwc3/dwc3-qcom.c | 22 +++++++++++++++++-----
> 1 file changed, 17 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
> index 12182e0f8f45..d3e6d5d5e8bf 100644
> --- a/drivers/usb/dwc3/dwc3-qcom.c
> +++ b/drivers/usb/dwc3/dwc3-qcom.c
> @@ -52,6 +52,13 @@
> #define APPS_USB_AVG_BW 0
> #define APPS_USB_PEAK_BW MBps_to_icc(40)
>
> +static const u32 pwr_evnt_irq_stat_reg[DWC3_MAX_PORTS] = {
DWC3_MAX_PORTS is not qcom specific. For qcom specific max ports, please
create your own macro here.
> + 0x58,
> + 0x1dc,
> + 0x228,
> + 0x238,
> +};
> +
> struct dwc3_qcom_port {
> int qusb2_phy_irq;
> int dp_hs_phy_irq;
> @@ -421,9 +428,11 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
> if (qcom->is_suspended)
> return 0;
>
> - val = readl(qcom->qscratch_base + PWR_EVNT_IRQ_STAT_REG);
> - if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
> - dev_err(qcom->dev, "HS-PHY not in L2\n");
> + for (i = 0; i < qcom->num_ports; i++) {
> + val = readl(qcom->qscratch_base + pwr_evnt_irq_stat_reg[i]);
> + if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
> + dev_err(qcom->dev, "port-%d HS-PHY not in L2\n", i + 1);
> + }
>
> for (i = qcom->num_clocks - 1; i >= 0; i--)
> clk_disable_unprepare(qcom->clks[i]);
> @@ -472,8 +481,11 @@ static int dwc3_qcom_resume(struct dwc3_qcom *qcom, bool wakeup)
> dev_warn(qcom->dev, "failed to enable interconnect: %d\n", ret);
>
> /* Clear existing events from PHY related to L2 in/out */
> - dwc3_qcom_setbits(qcom->qscratch_base, PWR_EVNT_IRQ_STAT_REG,
> - PWR_EVNT_LPM_IN_L2_MASK | PWR_EVNT_LPM_OUT_L2_MASK);
> + for (i = 0; i < qcom->num_ports; i++) {
> + dwc3_qcom_setbits(qcom->qscratch_base,
> + pwr_evnt_irq_stat_reg[i],
> + PWR_EVNT_LPM_IN_L2_MASK | PWR_EVNT_LPM_OUT_L2_MASK);
> + }
>
> qcom->is_suspended = false;
>
> --
> 2.34.1
>
Whether or not you decided to create v21:
Acked-by: Thinh Nguyen <[email protected]>
Thanks,
Thinh