GPIOs 25 and 26 do not support pull-up/pull-down when those are muxed
as I2C6's SDA6/SCL6 lines: set those to bias-disable to avoid warning
messages from the pinctrl driver.
Fixes: 96564b1e2ea4 ("arm64: dts: mediatek: Introduce the MT8395 Radxa NIO 12L board")
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
---
arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
index 18182cf073fb..86f7d4dd5eae 100644
--- a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
@@ -528,7 +528,7 @@ i2c6_pins: i2c6-pins {
pins {
pinmux = <PINMUX_GPIO25__FUNC_SDA6>,
<PINMUX_GPIO26__FUNC_SCL6>;
- bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+ bias-disable;
};
};
--
2.44.0