The paris pinctrl driver supports specifying the RSEL drive strength
in microamperes as well as internal bits definitions: choose to specify
those in uA to avoid using hardware specific values in device trees.
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
---
arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
index 86f7d4dd5eae..f699633659b6 100644
--- a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
@@ -434,6 +434,8 @@ &mt6359_vsram_others_ldo_reg {
};
&pio {
+ mediatek,rsel-resistance-in-si-unit;
+
eth_default_pins: eth-default-pins {
pins-cc {
pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>,
@@ -509,7 +511,7 @@ i2c2_pins: i2c2-pins {
pins-bus {
pinmux = <PINMUX_GPIO12__FUNC_SDA2>,
<PINMUX_GPIO13__FUNC_SCL2>;
- bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+ bias-pull-up = <1000>;
drive-strength = <6>;
drive-strength-microamp = <1000>;
};
@@ -519,7 +521,7 @@ i2c4_pins: i2c4-pins {
pins-bus {
pinmux = <PINMUX_GPIO16__FUNC_SDA4>,
<PINMUX_GPIO17__FUNC_SCL4>;
- bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+ bias-pull-up = <1000>;
drive-strength-microamp = <1000>;
};
};
--
2.44.0