From: Hugo Villeneuve <[email protected]>
Hello,
this patch series splits the SPI/I2C parts for the sc16is7xx driver into
separate source files (and separate I2C/SPI drivers).
These changes are based on suggestions made by Andy Shevchenko
following this discussion:
Link: https://lore.kernel.org/all/CAHp75VebCZckUrNraYQj9k=Mrn2kbYs1Lx26f5-8rKJ3RXeh-w@mail.gmail.com/
The changes are split into multiple patches to facilitate the review process.
In the end, some of them could be merged into a single patch.
I have tested the changes on a custom board with two SC16IS752 DUART over
a SPI interface using a Variscite IMX8MN NANO SOM. The four UARTs are
configured in RS-485 mode.
I did not test the changes on a real SC16is7xx using the I2C interface. But
I slightly modified the driver to be able to simulate an I2C device using
i2c-stub. I was then able to instantiate a virtual I2C device without
disturbing existing connection/communication between real SPI devices on
/dev/ttySC0 and /dev/ttySC2 (using a loopback cable).
Thank you.
Link: [v1] https://lore.kernel.org/lkml/[email protected]
[v2] https://lore.kernel.org/lkml/[email protected]
[v3] https://lore.kernel.org/lkml/[email protected]
Changes for V2:
- Move port_registered[] init before the for loop to prevent bug if
aborting probe when i = 0
- Since patch f7b487648986 ("lib/find: add atomic find_bit() primitives") has
been dropped from linux-next/master, rework patch 2 (sc16is7xx_lines)
without find_and_set_bit.
Changes for V3:
- Simplify sc16is7xx_lines allocation by using the IDA framework
Changes for V4:
Changes after Andy S. review comments:
- Fix commit description
- Fix includes for IWYU
- Add Reviewed-by tag (Andy) for patches 1 and 5
- Add exported symbols to SERIAL_NXP_SC16IS7XX namespace
- Fix Kconfig deps
- Keep Kconfig SERIAL_SC16IS7XX_CORE
- Convert to a single Kconfig entry and automatically selects
I2C and SPI interfaces if available.
- Merge patches 2 and 3
- Add NXP and UART keywords to Kconfig description
- Remove __maybe_unused from of_device_id
- Simplify I2C init/exit with module_i2c_driver()
- Simplify SPI init/exit with module_spi_driver()
Hugo Villeneuve (5):
serial: sc16is7xx: add proper sched.h include for sched_set_fifo()
serial: sc16is7xx: unconditionally clear line bit in
sc16is7xx_remove()
serial: sc16is7xx: split into core and I2C/SPI parts (core)
serial: sc16is7xx: split into core and I2C/SPI parts (sc16is7xx_lines)
serial: sc16is7xx: split into core and I2C/SPI parts
(sc16is7xx_regcfg)
drivers/tty/serial/Kconfig | 47 ++----
drivers/tty/serial/Makefile | 2 +
drivers/tty/serial/sc16is7xx.c | 261 +++++++----------------------
drivers/tty/serial/sc16is7xx.h | 41 +++++
drivers/tty/serial/sc16is7xx_i2c.c | 67 ++++++++
drivers/tty/serial/sc16is7xx_spi.c | 90 ++++++++++
6 files changed, 277 insertions(+), 231 deletions(-)
create mode 100644 drivers/tty/serial/sc16is7xx.h
create mode 100644 drivers/tty/serial/sc16is7xx_i2c.c
create mode 100644 drivers/tty/serial/sc16is7xx_spi.c
base-commit: fec50db7033ea478773b159e0e2efb135270e3b7
--
2.39.2